Yowlieu Fence Wire Clamps 100 Pcs for 12–16 Gauge Wire — 304 Stainless Steel with Screws Included

Yowlieu 100 Pcs Fence Wire Clamps with 100 Screws are stainless-steel R-type clips designed to fasten 12–16 gauge welded wire to vinyl, wood, metal or composite fence posts.

These compact mounting clips pair corrosion-resistant 304 stainless steel construction with a simple two-hole screw design to secure hog wire, welded grid, and other farm or garden fencing to a variety of post materials. Supplied in a bulk set of 100 clips and matching screws, the kit is made for routine installation and repair work on residential and agricultural fences. The clamps hold wire in a circular slot and are tightened to the post with the included screws so fencing tension transfers to multiple fasteners instead of a single point.

How do these clamps attach welded wire to different post materials?

The R-shaped clips accept 12–16 gauge wire in a round opening while two screw holes lock the piece to the post. They work on vinyl, painted or raw wood, PVC, steel, and composite posts when paired with the included screws or with appropriate fasteners for the substrate.

• Use the included screws for wood or standard posts.
• Choose self-tapping or masonry screws for metal or concrete posts.
• Position clips every 2–3 feet horizontally and vertically for even load distribution.
• Clip design keeps wire seated while you drive the screw, simplifying one-person installs.

Will these clamps resist rust and outdoor weathering?

The clips are stamped from 304 stainless steel, giving them superior oxidation and corrosion resistance compared with galvanized alternatives. That makes them suitable for outdoor fence lines, coastal areas, and agricultural settings where moisture and weather exposure are common.

• 304 stainless construction minimizes rust formation over time.
• Small, solid stamping resists bending under typical fence loads.
• No coatings to flake—performance comes from the metal alloy itself.
• Durable for seasonal use and periodic fence maintenance.

What wire sizes and fence types does this kit support?

These R-type clamps are sized for 12–16 gauge welded and hog wire commonly used for animal enclosures, garden perimeter, and reinforcement panels. They suit a wide range of rails, from lightweight garden fences to heavier farm grids, but should be matched to wire gauge for best fit.

• Fits 12, 13, 14, 15 and 16 gauge welded or hog wire.
• Works with welded mesh panels, roll-out hog wire, and similar grid products.
• Not intended for very heavy cable or chain-link tensioning.
• Use multiple clamps per panel to spread stress evenly and increase stability.

How easy is installation and how many clips are needed per section?

Installation is straightforward: seat the wire in the clip's circular opening, align the clip on the post, and drive the screw through one or both holes. For typical installs, place clips every 2–3 feet along rails and at vertical intervals for taller panels to distribute pressure and reduce sag.

• Each pack includes 100 clips and 100 matching screws for immediate use.
• Estimate one clip every 2–3 feet horizontally; add vertical clips for taller fences.
• Pre-drill pilot holes in hardwood or metal posts to ease fastening.
• One-person installs are possible thanks to the clip’s wire-retaining slot.

Who is this for: The Yowlieu 100-pack fence wire clamps are aimed at homeowners, small-scale farmers, and contractors who need a durable, no-fuss solution for mounting welded wire to a variety of posts. They suit repairs, new installations, and seasonal upgrades for pet enclosures, chicken coops, garden fencing, and light agricultural partitions where stainless steel longevity and reliable fastening matter.