Grill & Meat Thermometers

The PETKAO G432-8L00-W1 is a 1.8-inch round lid temperature gauge made to replace the original Char-Broil lid thermometer and read grill temperatures from 150°F to 650°F. This replacement lid gauge fits Char-Broil Advantage 4- and 6-burner models (2015 and newer), selected Tru-Infrared Performance 2-burner...

The Taylor Digital Meat Thermometer is a slim, NSF‑listed instant‑read probe with a 1.5 mm FDA‑recommended tip and an amber backlit display for fast, accurate temperature checks from -40°F to 500°F. Built on Taylor's measurement heritage since 1851, this waterproof digital thermometer is designed...

The TempPro TP19H is a 1-second instant-read digital meat thermometer with a 180° auto-rotating backlit display, motion-sensing sleep/wake, IP65 waterproofing, and a 4.3-inch stainless steel probe for fast, accurate temperature checks. The TempPro TP19H is designed to make cooking and grilling quicker and less...

TempPro TempSwift is a digital instant-read meat thermometer that delivers accurate temperatures in one second with a durable 4.3" stainless steel probe and user-friendly features for home cooks and pros. If you want meal-ready temperatures fast and reliably, the TempPro TempSwift makes checking doneness...

The Cuisinart CSG-200 combines a non-contact infrared gun and a foldaway instant-read probe so you can check both surface and internal temperatures quickly and accurately. Whether you’re monitoring a hot pizza stone, scouting for grill hot spots, or confirming internal doneness, this 2-in-1 grilling...

Weber Instant-Read Thermometer Probe delivers a fast digital internal temperature reading for meat and fish in under 15 seconds. Whether you’re searing steaks on a charcoal grill, finishing a roast in the oven, or checking a pan-seared salmon, the Weber Instant-Read Thermometer Probe gives...

DOZYANT Grill Temperature Gauge is a stainless-steel analog thermometer that displays grill and smoker temperatures from 50°F to 800°F with a large 2 3/8" dial for easy reading. Whether you're searing steaks, slow-smoking brisket, or maintaining a charcoal kettle, accurate temperature feedback is essential....

DOZYANT's 3-inch large-face grill thermometer 2-pack provides fast, accurate surface temperature readings from 100°F to 550°F for grill and smoker doors. Whether you’re seasoning a cast-iron skillet, smoking brisket low and slow, or searing steaks over high heat, reliable temperature information is the difference...

The Weber iGrill Pro Meat Probe is a rugged 48-inch temperature probe built to give precise, long-range readings for iGrill Mini, iGrill 2, and iGrill 3 devices. Whether you smoke low-and-slow brisket or sear steaks hot and fast, accurate temperature monitoring is essential. The...

DcYourHome's replacement lid thermometer fits Oklahoma Joe's and most grills with a 13/16" opening, reading 100–550°F with waterproof, fog-proof construction and glow-in-the-dark markings for low-light use. This stainless-steel analog thermometer is designed as a direct-fit replacement for Oklahoma Joe's original gauge (part number 3695528R06)...

The BlueStars PB1000XL-025-R00 V2 RTD Temperature Probe is a direct-fit replacement grill sensor designed to give fast, accurate internal temperature readings for compatible Pit Boss pellet grills and smokers. If a worn or broken probe is interrupting your smoke sessions, this upgraded RTD probe...

DOZYANT's 3 1/8" smoker temperature gauge is a stainless-steel replacement dial with a 3" probe that fits a 13/16" hole and displays 100–550°F with color-coded smoke and barbecue zones. If your grill or smoker needs a reliable, easy-to-read temperature gauge, this replacement instrument gives...

The Weber Wired Food Probe delivers fast, precise internal temperature readings for Weber Smart grills and smokers so you can cook confidently every time. Designed as an OEM accessory for Weber Searwood pellet grills and Summit Smart gas grills, this wired food probe uses...

BlueStars 2-Pack Temperature Meat Probe Replacement delivers reliable, grill-safe internal temperature readings for compatible Rec Tec / Recteq pellet grills. These two replacement probes and matching holder clips are built as direct-fit alternatives for many Rec Tec / Recteq grills, giving you quick, on-grill...

The ChefsTemp ProTemp S1 is a patented smart grill gauge hub that replaces a dial gauge to add Wi‑Fi/Bluetooth monitoring, up to 1000°F accuracy, and support for wireless probes and fans. The ProTemp S1 converts a traditional grill or smoker into a connected cooking...

The ChefsTemp ProTemp S1 is a patented smart grill gauge hub that replaces a dial gauge to add Wi‑Fi/Bluetooth monitoring, high‑accuracy sensing to 1000°F, and support for up to four wireless probes. Upgrade an analog grill or smoker into a connected cooking system with...

The Inkbird ISC-027BW is a USB‑powered Wi‑Fi & Bluetooth smoker fan controller that automatically adjusts airflow and tracks probe temperatures so you keep steady heat for smoking, grilling, or roasting. Compact and engineered for backyard pitmasters, the ISC-027BW combines Bluetooth 5.0 and 2.4GHz Wi‑Fi...

The LemonRoad Digital Pro Controller Kit is an all-in-one replacement package that restores precise temperature control and pellet-feed reliability for compatible wood-pellet grills and smokers. Whether you’re repairing a favorite backyard smoker or upgrading components for heavier use, this kit groups the thermostat controller,...

INKBIRD's Wi‑Fi & Bluetooth BBQ Automatic Smoker Fan Thermometer is a smart, USB‑powered controller that maintains grill temperature by adjusting fan speed and offers remote monitoring via 2.4GHz Wi‑Fi or Bluetooth 5.0. If you want consistent low‑and‑slow results without babysitting the smoker, this controller...

Unidanho WiFi PID Controller is a drop-in digital thermostat replacement for Pit Boss pellet grills with a rectangular control slot, adding precise PID temperature control plus WiFi app monitoring and two meat probes. If your Pit Boss pellet grill uses a rectangular control panel...

FlameEngine's digital control board replaces the PID controller (Part No. P-1205) used in Green Mountain Grill Daniel Boone Prime, Plus and Ledge models to restore precise temperature control. This FlameEngine replacement board is a direct-fit electronic module engineered for Green Mountain Grill units that...

The Weber iGrill 3 is an app-connected grill thermometer that installs in compatible Weber Genesis II and Spirit II grills to monitor up to four probes and send real-time doneness alerts to your phone. Whether you're managing a weekend smoker session or grilling weeknight...

The INKBIRD 5G WiFi and Bluetooth BBQ Temperature Controller is a USB-powered grill fan controller with five food-grade probes that maintains set temperatures remotely via 5G Wi‑Fi or Bluetooth. Designed for smokers, grills and outdoor cooks who demand consistent results, this Inkbird controller combines...

The Inkbird 5G Wi‑Fi & Bluetooth BBQ Temperature Controller is a USB‑powered grill controller with 5 probes, a smart fan with lid detection, and app monitoring over 5G Wi‑Fi or Bluetooth 5.0. If you want to maintain consistent grill or smoker temperatures while monitoring...

The Dilomber Pellet Grills Control Board 80145 is a plug-and-play WiFi & Bluetooth replacement controller engineered to restore precise temperature control for Pit Boss Pro Series II 1150 (PB1150PS2) pellet grills. If your Pit Boss PB1150PS2 has a failing display, unresponsive buttons, or lost...

InkGrill Smoker Temperature Controller is a Wi‑Fi and Bluetooth enabled fan controller that automates airflow to hold target temperatures in Big Green Egg grills and similar smokers. This compact controller pairs with 5G Wi‑Fi or Bluetooth to monitor and adjust your grill remotely, using...

The Tel-Tru BQ300 is a stainless-steel barbecue, pit, and smoker thermometer featuring a 3-inch glow dial with cooking zones and a 4-inch, 1/2" NPT stem rated 100–500°F. Built for backyard cooks and pitmasters who want a reliable, easy-to-read temperature gauge, the BQ300 combines a...

Ooni's Digital Infrared Thermometer Gun is a laser-guided, oven-calibrated tool that gives fast, accurate surface-temperature readings tailored for Ooni cordierite baking stones. Whether you're firing up an Ooni pizza oven or checking a grill plate, this handheld infrared thermometer is built to read extreme...

The Typhur Sync Gold Gen2 is a Sub-1G wireless meat thermometer system with six high-speed probes, a smart LCD base, and long-range signal strength built for reliable temperature monitoring in any cooking environment. Built for backyard smokers, professional kitchens, and adventurous pitmasters, the Sync...

The SROKIO digital W/LCD thermostat kit is a complete replacement control board assembly that restores temperature control and probe monitoring for Pit Boss Austin XL 1000 and Tailgater 340 pellet grills. If your Pit Boss Austin XL (PB1000XLW1) or Tailgater 340 (PB340TGW1) has an...

ULXIOM Digital Thermostat Controller Board is a drop-in replacement control panel for compatible Z GRILLS and similar wood pellet BBQs, restoring temperature control, smoke mode, and ignition functions. If your pellet grill display is nonfunctional, showing error codes, or the auger/ignition no longer responds,...

HunGrill’s Digital Trapezoid Grill Controller Kit replaces the factory thermostat on compatible Pit Boss Copperhead vertical pellet smokers and adds reliable temperature control plus a hot rod for consistent ignition. If your Pit Boss PBV3P1, PBV4PS1, PBV5P1, PBV5PW1 (Copper Walmart) or PBV7P1 smoker needs...

The dibay Digital Pro Controller is a tested plug-and-play replacement control panel for most Traeger pellet grills, delivering precise temperature control, dual meat-probe support, and an intuitive LED display. If your Traeger grill’s original controller has failed or you want a reliable upgrade, this...

This is a plug-and-play digital control board replacement kit with RTD temperature probe designed to restore precise temperature control on compatible Pit Boss pellet grills and smokers. If your Pit Boss Austin, Classic, Lexington, Tailgater or compatible smoker is losing temperature control or showing...

Eeranzoy's digital thermostat kit is a drop-in Pro controller replacement for most Traeger pellet grills that adds PID temperature control, a blue LED display, RTD grill sensing and two meat probes for precise cooking between 180–450 °F. If your Traeger grill controller has failed...

COMVIEE Digital Pro Controller kit is a plug-and-play BAC365-style replacement that restores precise grill and food temperature control for most Traeger wood pellet grills (except PTG). This comprehensive replacement kit includes a digital thermostat control panel, two waterproof meat probes, and a 7" RTD...

The Shunbaixin AC03P9 (PB1100PS1) control board is a direct-fit replacement LCD thermostat module that restores digital temperature control, dual-probe monitoring, and cook modes for compatible Pit Boss pellet grills and smokers. If your Pit Boss grill's control panel is cracked, unresponsive, or displaying errors,...

The Banbitebq AC03P9 PID replacement digital control board delivers precise temperature control and PID-driven smoke profiles to restore full cooking performance to compatible Pit Boss pellet grills. If your Pit Boss grill is showing erratic temperatures, failing to maintain setpoints, or the original control...

The Meatender trapezoid control board is a direct replacement controller engineered to restore digital temperature control and pellet-feed functions on select Pit Boss Copper-series grills and smokers. If your Pit Boss Tailgater, Lexington, Classic, or Austin XL is showing erratic temperatures, failing to feed...

The Podoy Upgrade Control Board kit is a plug-and-play replacement control panel built to restore and expand temperature control and modes on compatible Pit Boss pellet grills. If your Pit Boss pellet grill is showing erratic temperature behavior or an unresponsive control knob, this...

Replacement trapezoid control board for Pit Boss vertical smokers that restores temperature control, Prime pellet feeding, and multi-model compatibility. If your Pit Boss vertical smoker shows erratic temperatures, a missing Prime function, or a failed control panel, this Banbitebq trapezoid control board is designed...

MARS CAMP's replacement digital controller swaps into most Traeger wood pellet grills to restore precise temperature control, dual-probe monitoring, and a dedicated smoke mode. If your Traeger BAC365 or similar Traeger pellet grill controller has failed, this direct-fit replacement brings back LED temperature readouts,...

The Traeger Instant Read Meat Thermometer delivers accurate, ultra-fast temperature readings on the spot with a large auto-rotating LCD for easy viewing. Whether you're smoking brisket, grilling chicken, or pan-searing steaks, the Traeger Instant Read Thermometer puts reliable temperature data in your hand in...

The Tel-Tru BQ300 is a rugged, American-made barbecue thermometer with a 3-inch black dial, red cooking zones, and a 4-inch stainless steel stem for accurate smoker and grill readings from 100 to 500°F. Built for pitmasters and backyard cooks who need a reliable, hard-wearing...

OnniFlame's infrared thermometer gun is a non-contact digital laser meter that reads surface temperatures from -58°F to 1022°F (-50°C to 550°C) with fast, easy-to-read results. This handheld infrared thermometer is built for cooks, grill masters, technicians and DIYers who need quick, accurate surface temperatures...

The Traeger BAC431 Meat Probe Kit is a stainless-steel, digital meat probe designed for precise temperature monitoring with Traeger pellet grills and other compatible cookers. Whether you’re smoking brisket, roasting pork shoulder, or grilling a chicken, consistent temperature monitoring is essential to dependable results....

The OnniFlame Infrared Thermometer Temperature Gun is a non-contact cooking and home-use thermometer that quickly reads surface temperatures from -58°F to 1022°F (-50°C to 550°C). This compact, pistol-style infrared thermometer is built for cooks, grillers, and DIYers who need fast, readable surface temperatures without...

OnniOne Infrared Thermometer Gun is a handheld, non-contact surface thermometer that delivers instant temperature readings from -58°F to 1022°F for cooking, ovens, griddles, and equipment checks. Designed for anyone who needs quick, reliable surface-temperature readings, this infrared temperature gun is built to work with...

Replacement digital control board for Pit Boss pellet grills with an upgraded ignitor protection circuit and clear LCD display. This JZW-Shop upgraded control board is a direct-fit replacement designed for multiple Pit Boss pellet grill models, offering precise temperature control, a readable LCD, and...

The Cuisinart CTF-615 Digital Temperature Fork is a battery-powered grilling thermometer that gives instant, digital temperature readouts and an alarm so you hit the exact doneness every time. Take the uncertainty out of grilling with this compact digital fork from Cuisinart. Designed for backyard...