Pool Mate Metal Remover for Hot Tubs 2-Pack (1 pint each) — Non‑Phosphorous, Filter‑Safe Spa Treatment

Pool Mate 1-Pint Metal Remover (2-pack) is a non-phosphorous treatment formulated to capture and remove dissolved metals from spa and hot tub water to help reduce staining and corrosion risk.

When you fill or refill a spa, minerals and metals in source water — such as iron, copper, and manganese — can discolor surfaces, leave deposits, or accelerate equipment wear. Pool Mate Metal Remover offers a simple, dose-based approach: add measured pints to circulating water to bind metals so they can be filtered and eliminated, without introducing phosphates into your system.

How do I dose Pool Mate Metal Remover for my hot tub?

Dosing is straightforward and designed around spa volume. For every 625 gallons of water, add one pint (16 ounces) around the waterline while the pump is running. After adding, keep the circulation running for at least 30 minutes so the formula disperses and the filter can capture bound metals.

• Add 16 fl oz per 625 gallons of spa water.
• Dispense evenly around the waterline with the pump on.
• Run circulation for a minimum of 30 minutes after treatment.

Will this product harm my spa equipment or upset water balance?

Pool Mate Metal Remover is formulated for spa use and is non-phosphorous, which helps avoid adding nutrients that can fuel algae. Used at recommended dosages it is designed to be compatible with common spa sanitizers and filtration systems. Always follow routine water testing and adjust pH and sanitizer levels as needed after treatment.

• Non-phosphorous formulation minimizes additional nutrients.
• Compatible with standard spa sanitizers when used correctly.
• Maintain normal testing and balancing routines post-treatment.

How quickly will I see results and what should I do after adding it?

Visible improvement depends on the metal concentration and water clarity; lighter discoloration may clear after one treatment, while heavier staining could need filtration or additional doses. After treating and running circulation, check the filter and clean or backwash if it becomes loaded with captured particles. Repeat dosing on refills or when metal presence is suspected.

• Light issues may clear after a single treatment.
• Clean or backwash filters after particles accumulate.
• Treat newly filled spas proactively to prevent staining.

Can I use Pool Mate Metal Remover in all types of spas and water sources?

This product is intended for hot tubs and portable spas filled from municipal or well sources where metals are present. It works with most filtration and circulation setups but is not a substitute for physical cleaning of severe metal stains already set into surfaces—those may need specific stain removal products or professional attention.

• Suitable for hot tubs and portable spas with typical filtration.
• Use on initial fills or whenever metals are suspected in source water.
• Stubborn, set-in stains may require separate stain removers or service.

Who is this for: Pool Mate 1-Pint Metal Remover (2-pack) is aimed at spa owners, installers, and service technicians who want a practical, low-maintenance way to reduce metal-related staining and corrosion risk during fills or refills. It’s especially useful for properties fed by well water or municipal supplies with known iron, copper, or manganese content, and for anyone who prefers a non-phosphorous preventative treatment to protect surfaces and equipment.