Chainsaw Chains, Bars & Oil

The Savior 18" chainsaw bar and twin-chain combo is a replacement guide bar assembly (18", .325" pitch, .050" gauge, 72 drive links) engineered for mid‑size chainsaws like the Husqvarna 440. This kit supplies everything needed to swap worn components: one 18-inch TXL guide bar...

BYANE's 18-inch carbide-tipped chainsaw chain is a heavy-duty replacement chain built for 3/8" low-profile bars, .050" gauge, and 62 drive links, delivering up to ten times longer cutting life than standard steel chains in demanding conditions. This carbide chainsaw chain is engineered for professionals...

Savior's 14-inch bar and twin-chain combo is a replacement guide bar and low-kickback chain set engineered to fit a wide range of small Stihl-style saws, including MS170-compatible models. This 14" guide bar paired with two 3/8" LP, .050" gauge, 50-drive-link semi-chisel chains offers a...

KAKEI Skiptooth 24" chainsaw chains are a three-pack of full-chisel, 3/8" pitch, .050" gauge chains with 84 drive links designed to fit popular 24" bars including many Husqvarna and Stihl models. These replacement chains are engineered for heavy cutting tasks where a skip-tooth layout...

KAKEI 12-inch pole saw chain pack (3 chains) is a semi-chisel, low-kickback replacement designed for Stihl-compatible pole saw bars with 1/4" pitch, .043" gauge and 64 drive links. This three-chain set gives you ready-to-install spares for trimming branches with pole saw setups that accept...

BYANE's 24-inch carbide-tipped chainsaw chain is a heavy-duty replacement chain built for prolonged cutting life on 24" guide bars, featuring 3/8" pitch, .050" gauge, and 84 drive links. Designed for professionals and serious land managers, this chain pairs brazed tungsten-carbide cutters with reinforced links...

KAKEI's 3-pack 20-inch full-chisel chains are .325" pitch, .058" gauge, with 76 drive links—designed for aggressive cutting and compatibility with common 62cc consumer saws. If you need replacement chains that balance sharpness, durability and fit, these KAKEI chains are engineered for 20" bars on...

The Savior 20" chainsaw bar and twin-chain combo is a complete replacement kit—20-inch guide bar paired with two full-chisel 3/8" .050" 72-drive-link chains—designed to fit Husqvarna and many popular saw models. This kit gives you a ready-to-install guide bar and spare chains plus essential...

Mannial's 3-pack 24" replacement chains are precision-made 3/8" .050" (84 drive links) saw chains designed to fit 24-inch guide bars on many Husqvarna and Stihl models, supplied with a starter sharpener kit for on-the-spot maintenance. These replacement chains are built for homeowners and pros...

KAKEI 16-inch .325" pitch micro chisel chainsaw chain, 67 drive links, .063" gauge — a 3-pack engineered for durable cutting and wide compatibility with models like STIHL 026, 028, 029 and MS261. These KAKEI replacement chains are built from heat-controlled German steel with hardened,...

KUZA's 24-inch chainsaw chain is a heavy-duty replacement chain—3/8" pitch, .050" gauge, 84 drive links—designed for durable, low-kickback cutting on compatible Husqvarna, Stihl, Echo and similar saws. This replacement chain is engineered for homeowners and professionals who need a reliable 24" cutting loop that...

KUZA's 20-inch replacement chainsaw chain is a three-pack of durable German-steel chains (0.325" pitch, .063" gauge, 81 drive links) built to fit many pre-2023 STIHL models for reliable cutting performance. This three-chain set is made for homeowners, landscapers and contractors who need spare, ready-to-install...

The Savior 16" chainsaw bar and chain combo is a complete replacement kit—16" low-kickback guide bar with two .050" gauge, 3/8"LP 55-drive-link semi-chisel chains—designed to fit many Stihl small to mid-size saws. If your Stihl MS170 or a compatible compact saw needs a reliable...

The Savior 14" guide bar and matching 3/8"LP .050" 52-drive-link chains provide a ready-to-install replacement for small to mid-size saws, offering durable links, a reversible lightweight bar, and a complete accessory kit. If your compact chainsaw needs a dependable bar and chain that match...

High-strength replacement: this Fifchall 4-pack supplies four 18-inch .325" pitch, .050" gauge chains with 68 drive links engineered to fit post-2023 Stihl saws such as MS250 and MS251. If your Stihl saw needs a fresh cutting loop, these chains are made from heat-treated German...

SawWorks 20 Inch replacement chain: a 3-pack of full-chisel chains built to 3/8" pitch, .050" gauge with 72 drive links for high-efficiency cutting and long wear life. If you need a durable, factory-fit replacement for a 20" guide bar, this SawWorks chain set offers...

SawWorks 18" .325" pitch, .050" gauge chainsaw chain (74 drive links) is a durable, precision-cut replacement set engineered for reliable cutting performance and long-lasting sharpness. If you need an exact-fit replacement or a heavy-use spare for an 18-inch guide bar, this SawWorks three-pack supplies...

KAKEI’s 3-pack 18-inch full-chisel chains are .325" pitch, .063" gauge, 68-drive-link saw chains made to fit many pre‑2023 Stihl models like 025, MS250 and MS251. This replacement chain set provides a budget-friendly way to restore cutting performance to compatible Stihl guide bars. Each chain...

KAKEI 20" .325" pitch, .050" gauge full‑chisel chains — three replacement chains with 81 drive links made for post‑2023 Stihl models such as MS271 Farm Boss, MS291, and MS261. If your Stihl saw uses a 20‑inch bar with .325" pitch and .050" gauge, this...

Savior 3Pack 18" replacement chains are 3/8" low-profile, .050" gauge, 61-drive-link saw chains built to fit 18" guide bars for compatible Stihl models. These three replacement chains are designed for homeowners and pros who need ready-to-install spares for 18" bars commonly used on Stihl...

KAKEI 18-inch .325" pitch, .050" gauge full-chisel chains — a three-pack replacement compatible with many post-2023 Stihl models including 025, MS250 and MS251 when used with a .050" gauge bar. This set of three KAKEI saw chains delivers high-cutting efficiency and wear resistance for...

BYANE's 20-inch carbide chainsaw chain is a heavy-duty replacement chain with 3/8" pitch, .050" gauge, and 72 drive links built for long-lasting cutting performance in abrasive or frozen wood. This carbide-tipped chain is engineered as an industrial-strength option for professionals and serious land managers...

SawWorks 20-inch chainsaw chain (.325" pitch, .050" gauge, 81 drive links) is a full-chisel replacement chain built for durable sharpness, high cutting efficiency, and reliable fit for compatible saw bars. This three-pack of SawWorks chains delivers a balance of aggressive cutting power and built-in...

KAKEI three-pack 16-inch full-chisel chains designed for .325" pitch, .050" gauge, and 66 drive links deliver sharp, durable cutting performance for compatible chainsaws. These replacement chains are engineered for homeowners and professionals who need a ready supply of reliable cutters for mid-sized bars. Made...

SawWorks Skiptooth 28-inch chainsaw chain is a heavy-duty, 3/8" pitch, .050" gauge replacement chain with 93 drive links designed for fast cutting and extended wear life. This three-pack of SawWorks Skiptooth chains is built for users who need an aggressive cutting profile combined with...

Savior’s 16-inch guide bar and matched 56DL low-profile chain replace ECHO CS310/CS330 bars and chains, delivering a durable, low-kickback cutting setup compatible with many homeowner chainsaws. If you need a ready-to-install replacement bar and chain set for routine pruning, limb removal, or small tree...

V-MODEST 3-pack replacement saw chains for 24-inch bars: 84 drive links, 3/8" pitch and .050" (.013 mm) gauge, built for sharper, longer-lasting cutting. These chains are engineered as direct-fit replacements for many popular models from Husqvarna, Echo and Stihl. Each chain uses chrome-plated cutters,...

YETTAT's 16-inch replacement guide bar is a direct-fit swap for the Milwaukee 2727-20 M18 Fuel 16" chainsaw, restoring chain alignment and cutting performance. When your original guide bar shows wear, swapping in a precisely sized replacement gets your M18 Fuel back to dependable cutting....

RazEdg 16-inch carbide chainsaw chain: a 3/8" low-profile, .043" gauge, 56-drive-link semi-chisel chain with laser-welded tungsten-carbide tips built for extended cutting life in abrasive conditions. Designed for users who need a chain that resists wear in gritty, frozen, and sap-laden wood, this RazEdg replacement...

Oregon's 20-inch AdvanceCut guide bar paired with a .325" low-vibration micro chisel chain is a replacement combo built for reliable cutting performance and lower kickback for occasional commercial use. This all-in-one bar and chain set is designed to fit a wide range of consumer...

HTZSSON's Chainsaw Carrying Case is a waterproof, foldable storage bag sized 38.5×10×11 inches that safely carries 14", 16" and 18" cordless chainsaws and their accessories. Whether you're a weekend woodworker, a landscaping professional, or someone who stores seasonal power tools, keeping a chainsaw protected,...

DGP Pro100 is a professional-grade, USDA-certified biodegradable bar and chain oil that protects chainsaws while minimizing environmental impact. Built for pros and conscientious homeowners, this 1-gallon DGP Pro100 oil uses North American plant oils instead of petroleum, giving you a high-performance lubricant that’s safe...

The Stihl 3005-008-3913 is a 16-inch Rollomatic E Mini guide bar engineered for compact chainsaws that need a durable, low-vibration, precision-aligned bar for smooth cutting performance. This replacement guide bar fits 3/8" P pitch chains with a .043" gauge and is built to Stihl...

Oregon's 20" PowerCut bar and 72-drive-link chain combo replaces worn guide bars and chains on many popular mid-size saws. This complete guide bar and chain set pairs a lightweight, multi-rivet nose 20" guide bar with a 72-drive-link, 3/8" pitch, .050" gauge chain engineered for...

A 16-inch guide bar paired with three premium S55 replacement chains engineered to fit Stihl MS170, MS180C, MS210 and MS211 saws for reliable cutting and longer wear. This DatsenAAA kit includes a 16" low-kickback guide bar and three 3/8" LP .050" gauge S55 chains...

DatsenAAA’s 18-inch guide bar with three matching .063" gauge, .325" pitch 68 drive link chains is a direct replacement set engineered to fit many Stihl models including 021, 023, 025, MS250, MS361, MS230 and MS210. This kit pairs a lightweight 18" guide bar with...

Oregon's 18-inch bar and M72 .325"/.050" chainsaw chain combo provides a complete, ready-to-install replacement for many Husqvarna small-to-mid-sized saws, delivering fast cutting, low vibration, and enhanced lubrication in one package. This bar-and-chain set pairs an 18" guide bar with Oregon's M72 SpeedCut chain (72...

The Husqvarna X-Force 16" chainsaw bar is a factory-fit replacement guide bar engineered for precise cutting, long wear life, and hassle-free compatibility with select Husqvarna chainsaw models. This replacement guide bar restores the handling and cutting performance of compatible Husqvarna saws without modification. Built...

SLINRKE Chainsaw Carrying Case is a heavy-duty, water-resistant storage bag designed to protect and transport 14–18" battery-powered chainsaws and their accessories safely. Whether you move a chainsaw between job sites, store it in a shed, or need an organized solution for outdoor work, this...

The BYANE 20-inch chainsaw bar and chain combo is a ready-to-install, low-kickback guide bar with three pre-sharpened .325" .063" 81DL chains engineered for trimming, firewood and light landscaping tasks. This kits pairs a 20-inch tail-mount guide bar (D025 tail, 12-tooth sprocket nose) with three...

This is a 3-piece, 25-inch replacement chainsaw chain made by DatsenAAA to fit Stihl 33RS-84 models, featuring 84 drive links, 3/8" pitch and .050" gauge for robust, reliable cutting performance. If your Stihl 33RS-84 or a compatible saw is due for a new chain,...

Husqvarna X-Cut SP33G is a premium, factory-tuned .325" .050" 72-drive-link semi-chisel chainsaw chain sold as a three-pack for select 18-inch Husqvarna bars. Designed, engineered and manufactured by Husqvarna, the X-Cut SP33G chain brings longer-lasting sharpness and reliable cutting performance to both committed homeowners and...

Oregon’s 16-inch SpeedCut bar and 66-drive-link chain is a complete replacement combo built for reliable cutting, easy maintenance, and extended life through LubriTec oiling. This bar-and-chain kit pairs a lightweight, multi-rivet-nosed 16" guide bar with a 66-drive-link chain (.325" pitch, .050" gauge) designed for...

Nyrapag 20" replacement chainsaw chain is a two-pack of OEM-compatible chains designed to fit DEWALT DCCS677 series saws (DW01DT620 compatibility) to restore cutting performance quickly. If your DEWALT DCCS677 60V chainsaw is running dull or the chain has been damaged, this Nyrapag replacement chain...

E & S 6-Pack 20-inch chainsaw chains are replacement saw chains with 3/8" pitch, .050" gauge and 72 drive links designed for heavy-duty cutting and broad saw compatibility. These chains are engineered for professional and homeowner saws that accept a 20" bar, built from...

Oregon's 16-inch bar and matching .325"-.063" saw chain (67 drive links) is a ready-to-install replacement designed for a wide range of mid-size chainsaws. This bar-and-chain combo pairs a durable 16" guide bar with Oregon's premounted low-kickback chain engineered for reliable cutting, easy installation, and...

Jaffzora’s pole saw carrying case is a weather-resistant, padded storage and transport bag sized to hold most electric pole saws up to 44" x 5.5" x 6", protecting the pole, saw head, batteries and accessories during travel or storage. Whether you move between job...

Two genuine Husqvarna X-Cut 18" replacement chains (581643672) — .325" pitch, .050" gauge, sold as a retail-packaged 2-pack for compatible Husqvarna chainsaws. These replacement chains are designed to restore cutting performance on many Husqvarna saws that accept an 18" bar. Each pack contains two...

Oregon's 18-inch ControlCut guide bar and .325" pitch, .050" gauge, 72-drive-link saw chain is a direct replacement combo built for light commercial and homeowner saws that accept a K041 tail mount. This bar-and-chain set pairs a lightweight, multi-rivet-nosed guide bar with a low-vibration micro-chisel...

Opuladuo's 3-piece 16-inch replacement chain set restores cutting performance for EGO 56V 16" chainsaws compatible with CS1613, CS1604, CS1600, CS1610, and CS1611 models. If your EGO 56V 16-inch saw is losing bite or the chain is worn, this Opuladuo 3-pack gives you immediate, factory-fit...