VIVOHOME 1.5HP Dual-Speed Pool Pump with Remote Timer — Saltwater-Ready, Energy-Saving Quiet Operation

This pump pairs a powerful 1.5 HP motor with a 197-foot RF remote and programmable timer, so you can schedule cleaning cycles and switch speeds without walking to your equipment pad. Designed for both in-ground and above-ground pools, it includes corrosion-resistant materials, dual seals and an extra-large strainer to keep debris out of the impeller and prolong service life.

How does the dual-speed system benefit pool owners?

Switching between high and low speeds lets you match performance to the task: high for vacuuming and filter cleaning, low for continuous circulation and lower energy use. Running the pump at reduced speed when full power isn’t needed cuts electrical consumption and noise.

• High speed: up to 6,024 GPH and longer head for powerful cleaning.
• Low speed: 3,648 GPH for quiet, efficient circulation.
• Noise level as low as 65 dB on low speed for less disturbance.
• Estimated energy savings up to 66% when using low-speed circulation.

What convenience features does the remote timer provide?

The handheld RF remote gives long-range control and an on-screen readout for easy programming. You can set four time segments with distinct speeds or run the pump manually for as little as one minute up to 24 hours, reducing trips to the pump area.

• 197 ft RF range for remote operation from across yard or pool deck.
• Four programmable time segments for automated schedules.
• Manual timer option from 1 minute to 24 hours for one-off tasks.
• Remote alerts for voltage or stall conditions shown on the display.

How does this pump handle saltwater and pool chemicals?

Materials and sealing are selected to resist corrosion and chemical attack so the unit tolerates salt systems and treated pools. A stainless-steel shaft, dual mechanical and oil seals, and a thermoplastic housing help prevent leaks and extend pump life.

• Stainless-steel shaft and reinforced thermoplastic body for durability.
• Dual seals (mechanical + oil) to reduce leak risk around the motor shaft.
• Saltwater-ready construction for pools with saline sanitation systems.
• Chemical-resistant materials to withstand routine pool treatments.

What maintenance and safety features should I expect?

Maintenance is simplified by a large, removable strainer basket and a transparent lid so you can inspect debris without opening the casing. The pump also includes automatic shutdown for overload or overheat conditions and startup guidance to protect the mechanical seal.

• Extra-large detachable strainer basket captures leaves and debris.
• Clear lid lets you verify flow and basket condition at a glance.
• Automatic shutdown on overload/overheat to protect the motor.
• Drain plug for quick winterization and PTFE tape on fittings for airtight seals.

Who is this for? Pool owners who want the flexibility of remote scheduling, the cleaning power of a 1.5 HP pump, and materials built to resist salt and chemicals will benefit most. It’s suited for anyone upgrading an older single-speed pump to reduce energy usage and noise, or for new installations where remote control and easy maintenance are priorities. Follow the included startup guidance—fill the volute and strainer pot before operating and never run the pump dry—to protect seals and impellers and ensure reliable performance season after season.