T POWER 12V Generator Charger for Westinghouse WGen9500 WGen12000 iGen4500 - 12V DC 1.2A Trickle Charger, 2-Pin - Black

T POWER 12V charger is a compact replacement DC adapter designed to charge the 12V battery on compatible Westinghouse WGen and WPro portable generators.

This T POWER adapter supplies a steady 14.4W / 1.2A output through a two-pin connector, letting you maintain or trickle-charge the onboard lead-acid battery used for electric start systems on a range of Westinghouse inverter and conventional generators. It accepts wide AC input (100–240V) so it works internationally with the correct plug adapter and offers an uncomplicated alternative to OEM chargers.

Which Westinghouse models will this charger work with?

The adapter was made to fit many Westinghouse models that use a 12V charging interface and a two-pin connector. Confirm your generator’s model number or part number matches compatibility listings before buying to ensure the connector and voltage are correct.

• Compatible models include WGen9500, WGen12000, WGen3600DF, iGen4500 and variants (WGen9500DF, WGen12000DF, iGen4500DF).
• Also listed for WPro12000, WPro8500 and certain XY/YP-018 series units that require 12V trickle chargers.
• Intended for sealed lead-acid batteries commonly used in these generators (7Ah–21Ah ranges mentioned by Westinghouse).

How do I use the charger safely with my generator?

Using the adapter is straightforward: plug the AC end into a standard outlet and connect the two-pin DC plug to the generator’s battery port while following factory safety guidance. Do not override battery safety labels — disconnect if any abnormal heating or odors occur.

• Confirm generator is switched off and engine is cool before connecting.
• Use only the two-pin DC port specified by the manufacturer; avoid direct battery terminal attachments unless instructed.
• Monitor charging periodically; remove the adapter when battery is fully charged or per manufacturer recommendations.

What electrical specifications and limits should I know?

The unit accepts AC input across a broad voltage range and outputs regulated 12V DC at 1.2A (approximately 14.4W). It is intended for maintenance and trickle charging rather than rapid high-current charging of large capacity batteries.

• Input: AC 100V–240V (auto-switching), suitable for most country mains voltages.
• Output: DC 12V, 1.2A, 14.4W — ideal for small to mid-size lead-acid generator batteries.
• Two-pin DC connector designed for the generator’s charging port; check pin fitment and polarity before use.

Will this replace my original Westinghouse charger?

This T POWER adapter is marketed as a replacement or spare for many Westinghouse chargers with matching connector and voltage. It is a functional aftermarket option but verify your generator’s model and the OEM part number to confirm interchangeability.

• Designed as a direct aftermarket replacement where listed by model name and PN compatibility.
• Not an exact OEM unit; features may differ in casing or labeling though electrical output matches.
• Check warranty and support terms with the generator manufacturer if OEM parts are required.

Who is this for: Owners of Westinghouse portable generators who need a reliable maintenance charger or spare power adapter for their 12V battery system. It suits homeowners, contractors, or fleet operators using WGen and WPro series units who want a compact, wide-input replacement charger for routine battery upkeep and electric-start reliability.