Sunxeke Fuel Line Kit 6ft 1/8" ID Hose with 20 Clamps — Ethanol-Resistant, -22°F to 338°F

Sunxeke 6-foot 1/8-inch inner-diameter fuel line kit includes a durable oil- and ethanol-resistant hose plus 20 hose clamps for reliable small-engine fuel connections.

If you work on lawn mowers, tractors, mini bikes, ATVs or other small engines, having a flexible, cut-to-length fuel hose and sufficient clamps makes routine maintenance and repairs faster. This kit supplies a 6-foot (approximately 2 m) run of fuel hose with a 1/8 inch (3.5 mm) inner diameter and 20 matching clamp fasteners so you can replace brittle or leaking lines and secure fittings without multiple trips to the store.

What materials and temperature range does this fuel line handle?

The Sunxeke hose is formulated to resist gasoline, diesel and ethanol blends while tolerating a broad temperature window. It is built with a 2 mm wall thickness that balances flexibility with durability for above- and below-deck routing.

• Inner diameter: 1/8 inch (3.5 mm); outer diameter: 0.29 inch (7.5 mm)
• Wall thickness: 2 mm for abrasion and kink resistance
• Temperature tolerance: -22°F to 338°F (-30°C to 170°C)
• Compatible with gasoline, diesel and ethanol-containing fuels

Which vehicles and engines can I use this hose with?

This fuel line is suitable for many small-engine applications where a non-pressurized fuel feed is required. It works well on push mowers, snow blowers, garden tractors, small marine outboards and recreational vehicles that draw fuel by gravity or simple vacuum lines.

• Lawn mowers, riding tractors and garden equipment
• Mini bikes, pit bikes, ATVs, UTVs and go-karts
• Motorcycles, scooters and golf carts with non-pressurized systems
• Small outboard engines and portable pumps (non-pressurized applications)

How easy is it to install and size the hose for my project?

The 6-foot length can be trimmed to the exact run you need with a sharp knife or hose cutter. Because this line is designed for non-pressurized fuel routing, installation is straightforward: cut to length, slide on a clamp, seat the hose over the fitting, and tighten the clamp for a leak-free connection.

• Comes in a 6-foot continuous length ready to cut to size
• Includes 20 stainless-style hose clamps for secure fittings
• Easy to cut with hose cutters, utility knife or sharp shears
• Not intended for high-pressure fuel pump outlets—use manufacturer-specified lines for pressurized systems

How long will this hose last and when should I replace it?

The hose’s oil- and ethanol-resistant composition helps extend service life compared with basic rubber lines, but like any fuel hose it should be inspected periodically. Replace the hose if you see cracking, soft spots, brittleness or fuel seepage at fittings to avoid leaks and performance issues.

• Inspect annually or before long storage periods
• Replace if hardened, cracked or swollen from chemical exposure
• Keep spare clamps on hand; reuse clamps only if undamaged
• Regular replacement recommended for older equipment and seasonal use

Who is this for: This Sunxeke fuel line kit is ideal for DIY mechanics, small-engine repair shops, landscapers and hobbyists who maintain lawn and garden equipment, motorcycles, ATVs, mini bikes or small marine motors that use non-pressurized fuel lines. If you need an all-purpose, cut-to-length fuel hose with plenty of clamps for multiple repairs or a full re‑hose job, this kit offers a practical, ready-to-use solution.