Raindrip heavy-duty tubing support stakes for drip irrigation, 6-inch, 25-pack, UV-stabilized ABS

This 25-pack of Raindrip 6-inch heavy-duty tubing support stakes secures 1/8"–1/4" distribution tubing and attached emitters above soil and mulch for neater, easier-to-adjust drip irrigation.

Whether you’re laying out a new micro‑irrigation run or repairing an existing system, these stakes keep supply tubing and emitters positioned where they belong — close to the plant root zone but raised off the ground to reduce clogging from soil and mulch. Molded from UV‑stabilized ABS plastic, each stake includes built‑in notches sized to accept 0.185"–0.250" outer diameter tubing and common emitter types such as button drippers and inline drippers. The economical 25-pack gives you enough stakes to secure multiple rows, containers, or landscape beds.

How do these stakes hold supply tubing and emitters in place?

The stakes have molded notches that cradle tubing and also accept an emitter attached to that tubing, keeping the assembly stable and correctly positioned. Push the stake into soil near the plant, then press tubing into the notch; the stake’s length raises the emitter above mulch and loose soil for easier access.

• Built‑in notches fit 1/8"–1/4" OD tubing (0.185"–0.250").
• 6-inch length keeps emitters visible and reachable above mulch.
• Compatible with button, inline, and Take‑A‑Part flag drippers.
• Simple push‑in installation — no tools required.

Will these stakes withstand outdoor conditions and UV exposure?

The stakes are manufactured from acrylonitrile butadiene styrene (ABS) that’s treated with UV inhibitors to resist cracking and degradation over time. While robust for normal landscape use, periodic inspection and replacement are recommended if stakes show heavy wear from foot traffic or extreme conditions.

• ABS material provides strength and impact resistance.
• UV inhibitors slow sun‑related breakdown for longer service life.
• Replace individual stakes if they become cracked or bent.

How do I install and maintain these tubing support stakes?

Installation is straightforward: lay out the supply tubing, position each stake where you want an emitter, and press the stake into the soil while seating the tubing in the notch. Maintenance is minimal — occasionally check stakes for secure placement, clean debris from emitter openings, and swap out any stakes that have been damaged.

• Layout tubing first, then anchor at intervals with stakes.
• Adjust emitter height or location by moving the stake as plants grow.
• Inspect seasonally and replace damaged stakes as needed.

What sizing and quantity should I expect in this pack?

Each stake measures 6 inches long and is designed for distribution tubing between 0.185" and 0.250" outer diameter, covering common 1/8" to 1/4" drip lines. The pack contains twenty‑five stakes, enough for small to medium garden beds, multiple containers, or spot fixes across a larger installation.

• Stake length: 6 inches for stable placement and emitter access.
• Tubing compatibility: 1/8"–1/4" (0.185"–0.250" OD).
• Quantity: 25 stakes per pack for flexible layout options.

Who is this for: Landscapers, home gardeners, and maintenance crews who use drip or micro‑irrigation systems and need an affordable, durable way to anchor supply tubing and elevate emitters. Use these stakes for flower beds, vegetable rows, trees and shrubs, and container plant setups when you want organized tubing runs, easier emitter access, and reduced clogging from soil and mulch.

Raindrip has supplied irrigation components since 1972, and these tubing support stakes are a simple, field‑proven accessory for customizing and maintaining drip systems efficiently.