Qloby Pool Pump Replacement Hoses 2-Pack 1.25" x 59" White — Thick PVC with 4 Metal Clamps

Qloby 1.25" x 59" replacement pool hoses (2-pack) are durable PVC suction hoses designed to connect above-ground pools to Intex-compatible filter pumps and keep water moving without leaks.

These hoses are built from thick, lightweight PVC and include four metal clamps for a tight, reliable connection between your pool and filter pump. Each hose measures approximately 1.25 inches (32 mm) inside diameter and 59 inches (1.5 m) long, matching common inlet sizes on many above-ground systems. The kit is aimed at simple swaps or upgrades for aging, cracked, or undersized hoses used with 330GPH, 530GPH, and 1000GPH pumps.

How do these hoses fit my Intex or above-ground pump?

The hoses are sized for a 1.25" (32 mm) inner diameter, which fits the inlet fittings on many Intex filter pumps (including models used with 330, 530, and 1000 GPH units) and similar above-ground pool equipment. They slip onto standard 1.25" connectors and lock down with the included metal clamps.

• Inner diameter: 1.25" / 32 mm — fits common pump connectors
• Length: 59" / 1.5 m — long enough for typical pool-to-pump routing
• Works with Intex models and other brands using the same hose size

Will these hoses prevent leaks and disconnections?

The hoses are made from thick PVC that resists kinking and wear, and each kit includes four corrosion-resistant metal clamps to secure both ends. When properly seated and tightened, the clamp-and-hose combination minimizes leaks and reduces the risk of the hose blowing off under pump pressure.

• Thick PVC construction for tear and puncture resistance
• Four sturdy metal clamps included to ensure a sealed connection
• Design supports consistent suction and flow without detachment

How easy is installation and maintenance?

Installation is straightforward: slide the hose onto the pump or pool fitting, position the clamp over the joint, and tighten until snug. Routine checks and occasional clamp retightening are all that’s needed to keep the connection secure throughout the season.

• Slip-on design — no special tools beyond a screwdriver for clamps
• Lightweight hose for easier handling and routing
• Replaceable and serviceable — ideal for quick field repairs

What compatibility or size checks should I make before buying?

Measure the inside diameter of your existing hose or the outside diameter of the pump fitting to confirm a 1.25" match. If your equipment uses a different size or nonstandard fittings, an adapter may be required. Allow for minor measurement variance caused by manual measurement.

• Verify pump and skimmer connector size prior to purchase
• Adapters may be necessary for nonstandard fittings or larger outlets
• Contact customer support for installation help if needed

Who is this for: This Qloby hose kit suits pool owners who need a straightforward, budget-friendly replacement for worn or leaking hoses on above-ground pools. It’s a practical choice for Intex users matching 1.25" connections, seasonal maintenance prep, and anyone who prefers to handle basic pump upkeep and repairs without professional service. If you need a two-hose set with clamps to restore reliable flow and prevent losses around the pump, this kit covers those needs with durable PVC and secure metal clamps.