PGGBOO LED Pool Light Bulb RGB 12V 36W E26 Replacement — Remote Control & 8 3/8” Gasket

PGGBOO's RGB 12V 36W LED pool light bulb is a waterproof, color-changing E26 replacement designed to fit common Pentair and Hayward inground fixtures and brighten pools with programmable colors using a remote or wall switch.

Upgrade your inground pool lighting with a modern, energy-efficient bulb that swaps into standard E26 housings and delivers seven color modes for nighttime ambiance. This PGGBOO unit comes with a molded gasket for the 8 3/8” lens, is built for underwater use, and pairs with a handheld remote and wall switch control so you can change color scenes without rewiring. Its compact design, silicone-filled driver and low 36W draw offer long runtime and major power savings compared with older incandescent or halogen pool lamps.

How does this LED bulb fit my existing Pentair or Hayward pool light?

The PGGBOO bulb uses a standard E26 screw base and is sized to replace many common in-ground pool lamps, including Pentair Amerlite 789/790/791 series and Hayward Astrolite SP058 models. Installation is a simple unscrew-and-replace process for fixtures that accept E26 lamps. If your fixture has an integrated transformer or nonstandard base, check compatibility first.

• Standard E26 screw-in base for fast replacement
• Compatible with Pentair and Hayward models listed above
• Includes one 8 3/8” pool light lens gasket for a water-tight seal
• Supports AC85–265V input for wide electrical compatibility

What color and control options are available for evening pool scenes?

This RGB bulb offers seven color modes that you select using the included infrared remote or the fixture’s switch. Modes range from steady single colors to mixed or cycling scenes, letting you create relaxed, party, or accent lighting. Keep in mind remote range can be influenced by the light’s mounting position and metal housing around the fixture.

• Seven preset color modes: single colors and dynamic cycles
• Remote control for convenient scene changes (remote batteries not included)
• Switch control works if remote signal is obstructed
• Metal housings may reduce infrared remote range

How much energy and maintenance can I expect compared to older pool lights?

The PGGBOO 36W LED is engineered to replace traditional 300–600W incandescent or halogen pool lamps, delivering up to roughly 85% lower energy use. Heat management uses a silicone-filled driver to extend service life and reduce failures caused by overheating. Fewer bulb changes and lower run costs make it a practical long-term lighting update for larger pools.

• Only 36W power draw, suitable for large pools with multiple LEDs
• Silicone-filled driver for improved heat dissipation and reliability
• Longer operational life than conventional pool bulbs
• Potential for significant electricity savings

Are there installation tips and limitations I should know about?

Turn power off at the breaker before replacing any pool lamp to ensure safety. The remote requires a 12V 23A battery (not included), and metal fixture parts or deep housings can weaken the remote’s infrared signal. If your pool light housing or transformer differs from the models listed, measure the socket and lens size before purchasing.

• Power must be disconnected at the breaker during installation
• Remote needs a 12V 23A battery (search for “12V 23A” separately)
• Included 8 3/8” gasket helps create a proper underwater seal
• Check fixture dimensions and transformer type for full compatibility

Who is this for: Pool owners and service professionals wanting a direct, energy-saving replacement bulb for common Pentair and Hayward inground fixtures. It’s a good fit for anyone who wants brighter, color-variable underwater illumination with easy remote or switch control and reduced operating costs compared to legacy bulbs.