PEISONGFEI 1-1/2 Inch Corrugated Pond Sump Pump Discharge Hose 10ft Black PVC — Anti-Kink with 2 Stainless Clamps

PEISONGFEI's 1-1/2" corrugated black PVC pond sump pump discharge hose is a 10-foot, anti-kink tubing solution for moving water from pumps, fountains, and ponds with two stainless-steel clamps included for easy hookup.

This corrugated discharge hose is made from tough PVC to handle continuous water flow and typical outdoor conditions. Designed with flexibility in mind, the corrugations let the hose bend around rocks, fittings, and tight runs without collapsing or kinking. The 1-1/2" inner diameter (1-13/16" outer diameter) fits many standard pump outlets, and the package includes two stainless-steel hose clamps for a quick, secure connection. Note that it will not fit barbed connectors with an outer diameter larger than 38mm.

What size is the hose and will it fit my pump?

The hose measures 1-1/2" ID with a 1-13/16" OD and comes in a 10-foot length. It matches most pumps that accept 1-1/2" discharge tubing but will not seat properly on barbed connectors exceeding 38mm outer diameter. If your pump outlet uses a larger barb, select an appropriately sized hose or adapter.

• Inner diameter: 1-1/2" (fits many standard pump outlets)
• Outer diameter: 1-13/16"
• Length: 10 feet — cuttable to desired length
• Not compatible with barbed connectors over 38mm OD

How durable and weather-resistant is the PEISONGFEI PVC tubing?

The hose is molded from rigid PVC formulated for outdoor water applications. It tolerates continuous water flow and typical pondside exposure without rapid wear. While rugged, avoid prolonged UV exposure without protection and inspect clamps and joins periodically for wear.

• Sturdy PVC construction resists abrasion and moisture
• Corrugated walls add crush- and kink-resistance
• Includes two stainless-steel clamps to prevent leaks at fittings
• For long-term UV exposure, consider shading or a protective wrap

Can this hose be routed around obstacles and used for waterfalls or fountains?

Yes — the corrugated profile lets the tubing flex around bends, rocks, and plantings while maintaining flow. It’s suitable for diverting pump output to waterfalls, pond spillways, rain barrels, and fountain heads when sized correctly.

• Corrugations prevent collapse on tight bends
• Flexible for custom runs over and under landscaping features
• Works well with submersible and external pond pumps
• Cut-to-fit length simplifies installation in complex setups

How do I install and maintain the discharge hose to avoid leaks or failures?

Installation is straightforward: slide the hose onto the pump outlet, tighten the supplied stainless clamps, and route the line with gentle bends. Regular checks of clamps and visible hose sections will catch wear early; replace or re-tighten clamps if leaks appear.

• Use the included stainless-steel clamps for a secure seal
• Avoid overly sharp bends; support long runs to prevent sagging
• Trim with a utility knife or hose cutter for clean ends
• Inspect annually and after freezing seasons for damage

Who this is for: Gardeners, pond installers, hobbyist aquaculturists, and DIY landscapers who need a dependable, flexible discharge line for small-to-medium water pumps. If you need a 10-foot, easy-to-route hose that resists kinking and includes hardware for a fast connection, this PEISONGFEI corrugated PVC tubing is a practical choice. If your setup uses larger barbed fittings over 38mm OD, measure carefully and choose a larger diameter hose or adapter.