Mysora 24VAC Solenoid Replacement for Hunter PGV & ICV Valves — 2-Pack, IP66 Weather-Resistant

Mysora 24VAC replacement solenoids (2-pack) are direct-fit magnetic actuators made to restore automatic control to Hunter PGV and ICV sprinkler valves quickly and reliably.

Designed for residential and light commercial irrigation zones, these Mysora solenoids pair a corrosion-resistant plastic housing with a copper coil to provide consistent valve operation at the standard 24VAC irrigation voltage. Each unit uses a 1/2" male threaded inlet and ships with adapters to match Hunter-style valve ports, so swapping out a worn solenoid is usually a matter of minutes and basic tools.

How do these Mysora solenoids fit Hunter PGV and ICV valves?

They replace the factory solenoid by threading into the valve bonnet using the included adapter when needed. The male 1/2" thread and standard barb inlet match common Hunter valve connections, allowing a snug mechanical and electrical fit.

• Includes two solenoids plus two adapters for direct compatibility
• 1/2" male thread conforms to many Hunter valve ports
• Screw-in installation — no specialty tools required
• IP66 protection for splash and dust resistance during outdoor use

What electrical and performance specs should I expect?

These units operate at the irrigation-standard 24VAC and are built for 50/60 Hz systems. The copper core supports efficient conductivity with low inrush and holding currents that reduce strain on controllers and wiring.

• Voltage: 24VAC, Frequency: 50/60 Hz
• Inrush current: 0.25 A; Holding current: 0.18 A
• Copper coil for stable electrical performance
• Rated for ambient and fluid temperatures up to listed maxima

Will these solenoids withstand outdoor conditions and frequent cycling?

The housings use weather-resistant plastic and the internal coil is copper, providing corrosion resistance suitable for irrigation environments. An IP66 rating means protection from dust ingress and powerful water jets, helping them last through routine exposure and cycling.

• IP66 rated for dust and heavy splash protection
• Durable materials designed for outdoor irrigation use
• Rated temperature limits: ambient up to 60°C and fluid up to 80°C
• Suitable for repeated open/close cycles typical in watering schedules

How simple is installation and what comes in the package?

Installation is straightforward: power down the controller, remove the old solenoid, and screw in the Mysora unit. The package supplies two solenoids and two adapters so you can replace solenoids on two zones or keep a spare on hand.

• Package contains 2x Mysora solenoids and 2x adapters
• Thread-in design — tighten by hand or with a basic wrench
• No special wiring required beyond standard irrigation hook-up
• Check thread size to confirm fit before installation

Who is this for: Homeowners, landscapers, and property managers who need a reliable, quick replacement for failed or aging solenoids on Hunter PGV and ICV sprinkler valves. If you run a 24VAC irrigation controller and want a cost-effective, IP66-rated replacement that installs without specialized tools, this Mysora two-pack is built to get valves back into automatic service.