Molten 18" Chainsaw Chain 2-Pack — EGO CS1800/CS1804 Compatible, German Steel Durability

Two replacement 18-inch chains engineered for EGO-compatible saws and select Echo/Poulan Pro models, built from premium German steel for extended life and consistent cutting.

These Molten replacement chains come as a two-pack sized for 18-inch bars and tailored to fit EGO models such as CS1800, CS1803, CS1804, CS1810 and CS1815, plus many Echo and Poulan Pro saws when chain specifications match. They are manufactured from high-grade German steel to reduce stretch and keep cutters sharper longer. Before buying, verify the stamped chain number on your current chain or compare pitch, gauge and drive link count to ensure compatibility.

Which saws will these chains fit?

They’re designed primarily for EGO 18-inch chainsaw models, and they also work with Echo CS400 and some Poulan Pro saws if the chain measurements line up. Always cross-check the chain number and your saw’s manual to confirm fitment.

• Compatible EGO models: CS1800, CS1803, CS1804, CS1810, CS1815
• Common Echo/Poulan compatibility when specs match: Echo CS400, Poulan Pro PR4218
• Replacement for Oregon S62 / 91PX62 style chains—verify the number on your chain

How does the German steel construction affect performance?

The chains use German-made alloy steel processed for toughness and dimensional stability, which helps resist stretching and wear during repeated cutting. That means fewer adjustments and longer intervals between replacements under normal use.

• Harder cutters retain edge geometry longer
• Reduced elongation keeps tension steadier
• Durable drive links resist deformation under load

What safety and installation steps should I follow?

Chainsaw chains can produce kickback and sharp fragments; always wear appropriate PPE and consult your saw manual for correct tensioning and chain direction. Install with the chain brake engaged, check bar and sprocket condition, then tension and oil the chain before first use.

• Wear gloves, eye protection and hearing protection
• Install with teeth pointing forward on top of the bar
• Tension to manufacturer spec and lubricate the bar groove

What should I match before ordering to avoid returns?

Confirm your existing chain’s identifying number and compare pitch, gauge and drive link count to the replacement listing. If your saw specifies an Oregon S62 or 91PX62-style chain, these Molten chains are intended as direct substitutes, but always verify measurements first.

• Check stamped chain number on the old chain
• Compare pitch (e.g., 3/8"), gauge (e.g., .050") and drive link count
• Inspect bar condition—replace bar if worn to prevent premature chain wear

Who is this for? This two-pack is aimed at homeowners, landscapers and pros who own EGO 18-inch chainsaws or compatible Echo/Poulan Pro models and want a reliable, cost-effective spare set of chains. If you value durability and longer cutting intervals, prefer ready spare chains for busy seasons, or need an Oregon S62/91PX62 replacement, these Molten chains offer a practical option—just confirm fitment before ordering.