KUMATER 1.5" Replacement Pool Hose 16" Pre-Assembled Connector for Intex Sand Filter Pumps – White, 1 Pack, Spiral-Wound PE

This KUMATER 1-1/2" 11535 replacement pool hose is a 16-inch, 1.5" diameter pre-assembled connector designed to replace worn interconnecting hoses on above-ground sand filter pumps and compatible Intex saltwater systems.

If your pool sand filter pump is leaking, sagging, or has lost suction, swapping the hose for a durable replacement restores reliable flow and prevents water waste. The KUMATER hose is made from weather-resistant PE plastic with a spiral-wound body and pre-mounted nuts on both ends for a tool-free swap that fits many common Intex pump model numbers. Use this hose as a single-pack replacement to maintain optimal circulation and filtration for the swimming season.

Will this hose fit my Intex sand filter pump?

Check the diameter and length before ordering: this hose uses a 1-1/2" (1.5") connection and measures 16 inches overall. It’s manufactured to match the same connection profile used on many Intex 16-inch sand filter pumps and saltwater systems.

• Fits 1.5" connection systems (measure your original hose opening).
• Compatible with listed Intex part numbers like 26371CA, 26371EH, 28647EG and others.
• Measure inside diameter and overall reach to confirm fit.
• Not OEM — compatibility references are for cross-checking only.

How easy is it to install the KUMATER replacement hose?

Installation is straightforward: the hose arrives pre-assembled with threaded hose nuts on each end so you can hand-tighten to the pump and filter fittings. No special tools or adhesives are required for most standard sand filter setups.

• Pre-mounted nuts mean quick hand-tighten connections.
• Spiral-wound design makes the hose flexible for alignment.
• Check for tight threads to reduce risk of leaks after installation.
• Replace annually for best performance and leak prevention.

What are the construction and performance features of this hose?

The hose is molded from durable polyethylene-type plastic with a thicker wall that resists deformation from sun exposure. A spiral-wound internal structure increases tensile strength while allowing the hose to flex; the durable hose nuts use a tight thread fit to reduce leakage around the connection points.

• PE plastic body resists sun damage and cracking.
• Spiral-wound core balances strength and flexibility.
• Tight-thread hose nuts minimize leaks at the joints.
• Designed for reliable suction and flow in sand filter systems.

When should I replace my pool filter hose?

Replace the hose if you notice leaks, reduced suction, visible cracks, or if the hose has hardened and no longer flexes. For consistent performance, many pool owners swap filter hoses annually or at the first sign of wear.

• Replace when leaks or cracks appear.
• Swap yearly to maintain peak filtration efficiency.
• Inspect after winter storage or heavy sun exposure.

Who is this for: Pool owners with above-ground sand filter pumps and Intex-compatible systems who need a quick, durable replacement hose. KUMATER’s 11535 1.5" x 16" hose is best for DIYers seeking a straightforward swap that restores suction and reduces leaks in filtration and saltwater setups. Remember to confirm your hose diameter and length against the originals and note that this is a compatible replacement, not an original manufacturer part.