Hipa Fuel Line Kit for RedMax Trimmers — 2 Fuel Hoses & 2 Primer Bulbs, OEM-fit Replacement

Hipa’s Fuel Line Kit replaces worn fuel hoses and primer bulbs on compatible RedMax and related small engines to restore reliable fuel delivery.

This replacement kit includes two fuel line assemblies and two primer bulbs designed to fit a wide range of RedMax trimmers, blowers and compatible powerheads. The parts are molded to match OEM routing and connectors so you can swap old, cracked lines and tired bulbs quickly without modifying your equipment. Before ordering, verify your model and part numbers to ensure compatibility with your specific machine.

Which machines will this Hipa kit work with?

The kit is engineered for many RedMax models as well as several To-Ro and Homelite units with similar fittings. It fits various trimmers, brushcutters, blowers and stick edgers listed by model numbers in the product details. Compatibility depends on engine layout and connector style, so checking your model numbers prevents returns.

• RedMax trimmers: BCZ2600S/BCZ2600SU/BCZ2600SW/BCZ2500S/BCZ2460S/BCZ2600
• RedMax blowers: EB4300/EB4401/EBZ4800/EB6200/EBZ5000/EBZ8000 series
• To-Ro part numbers: 51944–51998 series that share hose geometry
• Homelite models: BM254BV, SC254BV compatible with the listed powerheads

How do I install the replacement fuel lines and primer bulb?

Installation is straightforward for users comfortable with basic small-engine maintenance. Start by draining fuel, removing the old lines and primer bulb, and routing the new hoses following the original path to avoid kinks. Secure clamps or clips as needed and test for proper flow before full operation.

• Drain fuel and work in a ventilated area to avoid spills and fumes
• Compare new parts to originals to confirm matching connectors and lengths
• Route hoses along factory clips and avoid contact with hot surfaces
• Prime and inspect for leaks before running the engine at full throttle

What signs indicate I should replace my fuel lines and primer bulb?

Replace hoses and primer bulbs if you see cracks, hardening, fuel leaks, or if the primer fails to draw fuel into the carburetor. Reduced engine startability, irregular idling, or visible dry rot on lines are common indicators. Routine replacement as part of seasonal maintenance preserves performance and prevents breakdowns during use.

• Visible cracking, stickiness, or brittleness of hose material
• Primer bulb remains collapsed or does not pull fuel
• Fuel smell, dripping, or poor engine starting/idle behavior
• Old lines that have been exposed to sunlight or ethanol-blended fuels

What’s included in the package and are there any installation tips?

The package ships with two fuel line assemblies and two primer bulbs, enough to service a single dual-line installation or two separate tools. Keep hose clamps from the original assembly if they are undamaged, and consider replacing small clamps during installation for a secure seal. Use a gentle primer technique to avoid pulling air pockets into the fuel system.

• Included: 2 fuel line assemblies and 2 primer bulbs per package
• Verify model numbers and part styles before installation
• Replace accompanying clamps if corroded or deformed
• After install, prime and check for steady fuel flow without leaks

Who is this for: This Hipa replacement kit is aimed at homeowners, landscapers and repair technicians who maintain RedMax, To-Ro or compatible Homelite outdoor power equipment. If your trimmer, blower or edger shows signs of fuel delivery problems or you want to perform preventive upkeep, this kit supplies OEM-style parts for a reliable, cost-effective repair.