Fifchall 14-inch Chainsaw Chain 2-Pack — 3/8" LP, .050" Gauge, 52 Drive Links, Low-Kickback Durable Cutters

If you need a ready pair of replacement chains for routine yard maintenance or to revive a small chainsaw, this Fifchall 2-pack gives you two 14-inch chains engineered for consistent performance. Each chain measures 18.9 inches overall length, uses a 3/8" low-profile pitch with a .050" gauge and has 52 drive links—common dimensions for many consumer-grade electric and gas models. The links and rivets are heat-treated for strength, and the cutters are quenched to improve wear resistance and cutting smoothness.

How will these chains fit my saw?

These chains match the most common 14-inch chainsaw specifications: 3/8" LP pitch, .050" gauge and 52 drive links. Before ordering, confirm your saw or pole saw requires a 14-inch chain and check the drive link count stamped on the old chain or listed in your owner's manual.

• Chain length: 18.9 inches (fits 14" bar)
• Pitch: 3/8" low profile (LP)
• Gauge: .050" (1.3 mm)
• Drive links: 52

What performance and safety features do these chains offer?

Fifchall chains are manufactured with quenched cutters and heat-treated rivets to balance durability and smooth cutting. The design targets low kickback behavior to align with common consumer safety expectations, and the hardened construction extends usable life with routine sharpening and maintenance.

• Quenched cutters for wear resistance and smoother cuts
• Heat-treated rivets for stronger link connections
• Manufactured to meet kickback performance guidelines used in consumer tools
• Suitable for regular sharpening and resharpening

Which brands and models are compatible with this chain?

These chains are compatible with many popular 14-inch chainsaw and pole saw models from major brands. Compatibility depends on matching pitch, gauge and drive link count rather than brand name alone, but the pack lists common fits to help you cross-reference.

• Craftsman: S145, S1450, CMECS614
• Echo: CS310 and similar 14" models
• Poulan, Ryobi, Greenworks, Sun Joe, Makita and Worx 14" models
• Also fits many Homelite, Husqvarna, Remington and other consumer saws

How do I install and maintain these chains for best life?

Installation is straightforward: relieve bar tension, route the new chain over the sprocket and bar, then retension to the manufacturer’s specification. Routine maintenance—correct tensioning, proper lubrication, and timely sharpening—keeps cutting consistent and prolongs chain life.

• Loosen bar nuts, mount chain, snug chain and then tighten to spec
• Keep the bar groove and oil port clean and filled with bar oil
• Sharpen cutters when performance drops or after heavy use
• Replace if links, rivets or cutters show cracks or excessive wear

Who is this for? Homeowners, landscapers and anyone with a 14-inch chainsaw or pole saw who wants an affordable, ready-to-install spare set will appreciate this Fifchall 2-pack. It’s intended for routine yard work—pruning, limbing and light cutting—on electric and small gas saws that accept 3/8" LP, .050" gauge, 52-drive-link chains. Always verify compatibility with your tool before use, follow the saw manufacturer’s safety instructions, and use proper personal protective equipment when operating a chainsaw.