{"product_id":"heatit-hird-roof-gutter-snow-de-icing-cable-240-ft-5-w-ft-etl-csa-certified-plug-ready","title":"HEATIT HIRD Roof \u0026 Gutter Snow De-Icing Cable 240 ft, 5 W\/ft — ETL\/CSA Certified, Plug-Ready","description":"\u003cp\u003e\u003cstrong\u003eHEATIT HIRD 240 feet constant-wattage heating cable delivers 5 watts per foot to prevent ice dams and keep gutters and downspouts flowing when temperatures drop.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for residential roof edges, gutters and downspouts, this pre-assembled heating cable is ETL and CSA certified and arrives ready to install with a 6-foot cold lead and plug. The cable's XLPE inner insulation, weather-resistant PVC jacket and full aluminum foil\/tinned-copper braid shielding offer long-term durability in freeze\/thaw conditions. Multiple lengths support a range of roof and gutter layouts, helping melt accumulated snow and prevent damaging ice buildup without complex controls.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable reduce ice dam formation on my roof?\u003c\/h3\u003e\n\u003cp\u003eThe cable lays along roof edges and inside gutters to create a narrow, heated path that channels meltwater off the roof rather than letting it refreeze at the eave. By keeping the gutter and downspout clear, you reduce the pressure and leakage that can cause interior water damage. Installation along valleys and eaves where snow accumulates is especially effective.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstant 5 W\/ft output provides steady low-voltage heat along the run\u003c\/li\u003e\n  \u003cli\u003eInstalls on metal or plastic gutters and on inclined noncombustible roof surfaces\u003c\/li\u003e\n  \u003cli\u003ePre-assembled 6 ft cold lead with UL-certified plug for immediate use\u003c\/li\u003e\n  \u003cli\u003eFull shielding minimizes electrical interference and improves safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the HEATIT cable safe and certified for residential use?\u003c\/h3\u003e\n\u003cp\u003eThis heating cable is ETL and CSA certified, covering both the cable assembly and its performance to North American safety standards. The included plug is UL certified, and the cable construction uses robust XLPE insulation and a weather-resistant PVC outer jacket for long-term protection. Because it’s constant-wattage, it provides predictable heat output without requiring specialized controllers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eETL \u0026amp; CSA certified for full cable compliance\u003c\/li\u003e\n  \u003cli\u003eUL-certified plug included for added protection\u003c\/li\u003e\n  \u003cli\u003eAluminum foil and tinned copper braid ensure 100% shielding\u003c\/li\u003e\n  \u003cli\u003eXLPE and PVC layers for temperature and weather resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and test the HEATIT HIRD cable safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when you follow the included instructions and use the supplied clips and spacers to secure the cable. Uncoil the cable fully before powering to avoid overheating from overlaps. A simple pre-installation test — plug in after uncoiling and feel for slight warmth within about five minutes — confirms the cable is functioning before final mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled with 6 ft cold lead and plug for quick start\u003c\/li\u003e\n  \u003cli\u003eClips and spacers included for secure placement in gutters and eaves\u003c\/li\u003e\n  \u003cli\u003eAlways uncoil fully and test for warmth before final installation\u003c\/li\u003e\n  \u003cli\u003eDo not overlap or cross the cable during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich roofs and gutter systems are compatible with this cable?\u003c\/h3\u003e\n\u003cp\u003eThe HEATIT HIRD cable works on metal and plastic gutters as well as on inclined roofs covered with noncombustible shingles that comply with local building codes. It's supplied in a long 240-foot length at a constant 5 W\/ft output — suitable for extensive perimeter runs or multi-gutter setups. Select the proper layout so heat concentrates where ice forms: eaves, valleys, and downspouts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for asphalt and other noncombustible shingled roofs\u003c\/li\u003e\n  \u003cli\u003eWorks with metal and plastic gutters and downspouts\u003c\/li\u003e\n  \u003cli\u003eAvailable lengths accommodate typical residential roof perimeters\u003c\/li\u003e\n  \u003cli\u003eDesigned to prevent water backup and subsequent roof damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Homeowners and property managers who experience recurring ice dams, frozen gutters or blocked downspouts and want a certified, ready-to-install heating solution. It's a practical choice when you need a durable, constant-wattage cable that’s simple to test and mount along eaves, valleys and inside gutters. If you require professional assurance, consult a licensed installer to verify local code compliance and optimal placement for your roof configuration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this cable on asphalt shingle roofs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The cable is suitable for inclined roofs with noncombustible shingles that meet building codes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I check the cable before installing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Uncoil completely, plug in for about five minutes to feel slight warmth, then unplug before final mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HEATIT","offers":[{"title":"Default Title","offer_id":54210389049528,"sku":"B087P8SVK1","price":338.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/heatit-hird-front-packaging_53fcc7e4-c15b-4957-b97b-9220cfbd59a0.jpg?v=1790680304","url":"https:\/\/canadianlawn.ca\/products\/heatit-hird-roof-gutter-snow-de-icing-cable-240-ft-5-w-ft-etl-csa-certified-plug-ready","provider":"Canadian Lawn","version":"1.0","type":"link"}