{"title":"Small Engine Oil \u0026 Replacement Engines","description":"\u003cp\u003eTwo-stroke mix oil, four-stroke engine oil and replacement engines for mowers and outdoor power tools.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"arnold-2-cycle-engine-oil-mix-16-oz-tip-n-measure-bottle-ready-to-use-broad-compatibility","title":"Arnold 2-Cycle Engine Oil Mix 16 oz Tip-N-Measure Bottle — Ready-to-Use, Broad Compatibility","description":"\u003cp\u003e\u003cstrong\u003eArnold 2-Cycle Engine Oil Mix is a ready-to-use 16 oz tip-n-measure bottle that delivers reliable lubrication and easy fuel mixing for chainsaws, trimmers, and blowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep two-stroke outdoor power equipment running smoothly with a blended engine oil from Arnold, a brand with over five decades of product and engineering experience. This 16 oz bottle combines straightforward measurement features with an oil formulation designed for broad compatibility across major manufacturers, making routine fuel mixing and maintenance faster and less error-prone for pros and homeowners alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I mix this oil with fuel for the correct ratio?\u003c\/h3\u003e\n\u003cp\u003eMixing is simplified thanks to the Tip N Measure bottle: pour the exact oil volume required for common ratios without using separate measuring cups. Choose the ratio your engine requires, then add the corresponding measured oil to the fuel container and shake well to blend.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon supported ratios: 32:1, 40:1, 50:1 depending on your equipment.\u003c\/li\u003e\n  \u003cli\u003eUse the bottle’s tip for controlled pours and the marked neck for quick visual checks.\u003c\/li\u003e\n  \u003cli\u003eMix in a clean, approved fuel container and agitate to ensure even distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil work with my brand of chainsaw or trimmer?\u003c\/h3\u003e\n\u003cp\u003eArnold formulated this two-cycle oil to be compatible with a wide range of major outdoor power brands and common engine models. Check your equipment owner's manual for ratio and oil-type guidance, but this product is engineered to serve many professional and consumer machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for use in chainsaws, line trimmers, and handheld blowers.\u003c\/li\u003e\n  \u003cli\u003eCompatible across multiple popular OEM models and part numbers.\u003c\/li\u003e\n  \u003cli\u003eSuitable where a high-quality, general-purpose two-stroke oil is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect from Arnold 2-cycle oil?\u003c\/h3\u003e\n\u003cp\u003eThis oil provides dependable lubrication to help reduce friction and wear in two-stroke engines, supporting smoother operation and consistent starting. It also includes features that simplify fuel management, like a built-in stabilizer and an easy-pour top for accurate dosing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuperior lubrication for critical moving parts under normal operating conditions.\u003c\/li\u003e\n  \u003cli\u003eTip N Measure bottle reduces spills and overpouring during preparation.\u003c\/li\u003e\n  \u003cli\u003e16 oz size is convenient for quick top-ups and single-job mixing needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle the bottle to keep oil fresh?\u003c\/h3\u003e\n\u003cp\u003eStore in a cool, dry place away from direct sunlight and sources of heat or sparks. Keep the cap closed when not in use and avoid contaminating the tip; if fuel is left in the bottle after use, follow local disposal guidelines for mixed fuel or store per manufacturer recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReseal cap after each use to preserve product quality.\u003c\/li\u003e\n  \u003cli\u003eAvoid long-term exposure to heat or freezing temperatures.\u003c\/li\u003e\n  \u003cli\u003eDispose of any remaining mixed fuel following local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Arnold 2-Cycle Engine Oil Mix is aimed at landscape professionals and homeowners who want a dependable, easy-to-measure oil for routine maintenance of two-stroke equipment. It’s especially useful for users who value accurate mixing, broad brand compatibility, and the convenience of a portable 16 oz container for job-site use or seasonal servicing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mixing ratios does this oil support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports common two-stroke ratios including 32:1, 40:1, and 50:1—match the ratio to your engine’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil with any major brand chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s formulated for compatibility with many major manufacturers; always verify your equipment’s recommended oil type and ratio.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Arnold","offers":[{"title":"Default Title","offer_id":54192698425528,"sku":"B000BXKZTW","price":41.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/arnold-2-cycle-tip-n-measure-bottle.jpg?v=1790548476"},{"product_id":"hz-recoil-starter-assembly-for-honda-gx120-gx160-gx200-metal-cover-pre-assembled-pull-start-for-4-6-5hp-engines","title":"HZ Recoil Starter Assembly for Honda GX120 GX160 GX200 - Metal Cover, Pre-assembled Pull-Start for 4–6.5HP Engines","description":"\u003cp\u003e\u003cstrong\u003eThis is a replacement recoil (pull-start) assembly for Honda GX120, GX160 and GX200 small engines used on generators, water pumps, pressure washers and similar equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your GX-series engine won’t start because the pull rope, spring or pawls failed, this HZ recoil starter assembly provides a direct-fit replacement for many GX120, GX160 and GX200 configurations. It includes the metal cover, pawls, pulley, recoil spring and rope components found on common Honda-style rewind starters and is built to match the heavier-duty 4.0–6.5 HP engine applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this will fit my Honda GX engine?\u003c\/h3\u003e\n\u003cp\u003eHonda used several starter designs across GX120\/GX160\/GX200 engines, so fitment depends on the pawl and cover style. Compare the assembly you have to the product photos and the mounting pattern; the HZ unit matches the metal-cover type with external pawls.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare visual features to the second and third product images.\u003c\/li\u003e\n  \u003cli\u003eCheck mounting bolt spacing and center hub dimensions.\u003c\/li\u003e\n  \u003cli\u003eConfirm your engine uses a metal cover with exposed pawls (not all GX starters share this design).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components and durability can I expect from this recoil starter?\u003c\/h3\u003e\n\u003cp\u003eThe assembly arrives with a reinforced starter rope, a pre-wound recoil spring, a UV-resistant pulley and metal pawls designed for repeated engagement. Parts are made for heavy production replacement so they withstand frequent pull-start cycles found in pumps, generators and pressure washers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes rope, pulley, recoil spring, metal pawls and metal cover.\u003c\/li\u003e\n  \u003cli\u003ePre-assembled for faster installation and reduced downtime.\u003c\/li\u003e\n  \u003cli\u003eManufactured for repeated engagement in 4.0–6.5 HP small engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines and brands commonly use this replacement starter?\u003c\/h3\u003e\n\u003cp\u003eThis recoil starter fits many machines powered by GX120\/GX160\/GX200-style engines, including portable generators, water pumps, air compressors, log splitters, chipper shredders and certain pressure washers. It’s also compatible with numerous aftermarket equipment brands that source Honda-style engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon on small generators and portable water pumps (e.g., wb20xt-type pumps).\u003c\/li\u003e\n  \u003cli\u003eUsed by equipment brands such as Simpson, DeWalt, NorthStar and others.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers like 28400-ZE1-003ZF \/ 28400ZE1003ZF in matching designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the HZ recoil starter and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a basic mechanical repair: remove the old starter cover, note the bolt pattern, and transfer or replace components using the supplied unit. Before ordering, verify that the pawl arrangement, cover shape and bolt spacing match your engine to ensure correct engagement and safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove three or four mounting bolts to access the old starter assembly.\u003c\/li\u003e\n  \u003cli\u003eAlign the hub with the crank boss and secure using factory fasteners.\u003c\/li\u003e\n  \u003cli\u003eTest pull tension and pawl engagement before full reassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This HZ recoil starter assembly is aimed at DIY mechanics, small-engine service technicians and equipment owners who need a dependable replacement for a failed pull-start on Honda GX120\/GX160\/GX200-style engines. If your machine uses the metal-cover pawl design and you want a cost-effective, ready-to-install substitute for generators, pumps, compressors or outdoor power equipment, this unit is built for that purpose. If unsure, compare your existing starter to the product images or consult a parts diagram before purchase to avoid incompatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter compatible with all Honda GX160\/GX200 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It fits the metal-cover\/pawl-style GX120\/GX160\/GX200 variants. Compare your starter’s pawls and cover to the product photos before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the assembly include rope and spring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit ships assembled with the pull rope, recoil spring, pulley, pawls and metal cover ready for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HZ","offers":[{"title":"Default Title","offer_id":54193254793400,"sku":"B0939X6M73","price":54.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hz-recoil-starter-front-assembly.jpg?v=1790560210"},{"product_id":"hz-recoil-starter-assembly-for-honda-gx340-gx390-gx610-gx620-black-pre-assembled-with-rope-spring","title":"HZ Recoil Starter Assembly for Honda GX340 GX390 GX610 GX620 - Black, Pre-Assembled with Rope \u0026 Spring","description":"\u003cp\u003e\u003cstrong\u003eReplacement pull-start\/recoil starter assembly designed to fit Honda GX340, GX390, GX610, GX620 and many compatible 337–420cc engines used in generators, pressure washers, pumps and other power equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your engine won’t retract or the starter rope is frayed, this HZ black recoil starter offers a direct-fit replacement option for a wide range of Honda GX-series engines and several commonly compatible aftermarket models. Built with a durable starter rope, return spring and molded pulley, the assembly is intended to restore reliable manual starting on 11–16 horsepower engines where the original recoil mechanism has failed.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter assembly fit my Honda GX390 or GX340 engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the unit is made to replace the original Honda GX390 and GX340 rewind\/retract starters on many 337–420cc engines. Confirm fitment by matching part geometry and bolt pattern to your existing recoil housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Honda GX340, GX390, GX340T, GX390T, GX340UT2, GX390UT2, GX610, GX620.\u003c\/li\u003e\n  \u003cli\u003eWorks for engines listed as 337cc, 338cc, 389cc, 390cc, 420cc and similar displacements.\u003c\/li\u003e\n  \u003cli\u003eIntended replacement for OEM-style assemblies (check bolt layout and rope exit position).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this starter be used on generators and pressure washers from other brands?\u003c\/h3\u003e\n\u003cp\u003eOften yes — many generators, pressure washers and pumps use GX-series Honda clone engines or compatible bolt patterns. This starter has been used successfully on several aftermarket and OEM machines with matching mounting configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReported fits include Harbor Freight Predator engines, BE Power\/BE Powerease, DeWalt portable generators and Simpson pressure washers.\u003c\/li\u003e\n  \u003cli\u003eCommon applications: portable generators, water pumps, 4,000–4,400 psi pressure washers, log splitters and chippers.\u003c\/li\u003e\n  \u003cli\u003eVerify shaft height and starter housing fastener spacing before ordering for non-Honda brands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts and materials are included and how durable is the assembly?\u003c\/h3\u003e\n\u003cp\u003eThe assembly arrives as a pre-assembled recoil unit including pulley, starter rope, handle, and recoil spring. Components are designed for routine field service and replacement of worn original starters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed strong starter rope and molded grip\/handle for comfortable pulls.\u003c\/li\u003e\n  \u003cli\u003eMolded recoil pulley and steel return spring for consistent rewind action.\u003c\/li\u003e\n  \u003cli\u003eDurable housing interface intended to match OEM mounting points and resist common wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm compatibility before installation?\u003c\/h3\u003e\n\u003cp\u003eMeasure and compare key dimensions from your failed starter to the replacement — bolt hole spacing, central shaft clearance, and rope exit orientation are critical. If those match, this HZ starter is likely to fit without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck bolt pattern and diameter against the replacement unit.\u003c\/li\u003e\n  \u003cli\u003eConfirm central hub depth and engine shaft clearance to avoid interference.\u003c\/li\u003e\n  \u003cli\u003eCompare rope exit angle and handle position for ergonomic use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This recoil starter assembly is for DIY mechanics, small-engine repair shops, and equipment owners with Honda GX-series or compatible clone engines who need a reliable, ready-to-install replacement for worn or broken pull-start mechanisms. It suits owners of portable generators, pressure washers, pumps, log splitters and other outdoor power equipment who prefer a direct-fit replacement to return their machine to manual starting service quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace the OEM Honda GX390 starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed as a replacement for many Honda GX390\/GX340 OEM recoil starter assemblies when bolt pattern and shaft clearance match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation complicated?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No; installation is straightforward for someone comfortable with basic tools — remove the old unit, align bolt holes, and secure the new starter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HZ","offers":[{"title":"Default Title","offer_id":54193655283896,"sku":"B0939SV6V6","price":50.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hz-gx390-front-assembly.jpg?v=1790563909"},{"product_id":"echo-2-stroke-engine-oil-for-50-1-mixing-16-oz-squeeze-bottle-easy-measure-6-gallon-yield","title":"ECHO 2-Stroke Engine Oil for 50:1 Mixing 16 oz Squeeze Bottle — Easy-Measure, 6 Gallon Yield","description":"\u003cp\u003e\u003cstrong\u003eECHO Powerblend Gold 16 oz is a ready-to-use 2-stroke engine oil formulated for 50:1 fuel mixes and packaged in an easy-measure squeeze bottle that yields up to six gallons of premix.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you run handheld or small engine equipment that requires a 50:1 gasoline-to-oil ratio, this 16-ounce bottle gives you a convenient way to prepare up to six gallons of mixed fuel without guesswork. The bottle design includes a controllable squeeze spout for drip-free pouring and clearer measurement control, helping reduce spills and wasted oil while you mix fuel for trimmers, blowers, chainsaws, and other 2-cycle tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I measure the oil to get a correct 50:1 mix?\u003c\/h3\u003e\n\u003cp\u003ePreparing a correct 50:1 ratio is straightforward with this bottle: for every gallon of gasoline, add 2.6 fluid ounces of oil. The squeeze bottle lets you dispense small amounts precisely, so you can avoid over- or under-oiling the fuel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50:1 ratio equals 2.6 fl oz oil per 1 gallon gasoline.\u003c\/li\u003e\n  \u003cli\u003eOne 16 oz bottle mixes roughly 6 gallons (16 ÷ 2.6 ≈ 6.15).\u003c\/li\u003e\n  \u003cli\u003eSqueeze control provides steady flow and fewer drips during measuring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the bottle easier to use than standard containers?\u003c\/h3\u003e\n\u003cp\u003eThe packaging is designed for controlled dispensing and simple storage. A narrow spout and squeezable body help you pour measured doses without funnels or additional measuring cups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSqueeze action regulates flow for precise small-volume pours.\u003c\/li\u003e\n  \u003cli\u003eCompact 16 oz size stores easily in a workshop or tool bag.\u003c\/li\u003e\n  \u003cli\u003eClear markings and predictable flow reduce mess and cleanup time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and tasks is this oil suitable for?\u003c\/h3\u003e\n\u003cp\u003eThis product is intended for air-cooled two-stroke or two-cycle engines that require a 50:1 gasoline-to-oil mixture. It’s suitable for many handheld and light-duty outdoor power tools that use premix fuel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for trimmers, leaf blowers, chainsaws, and brush cutters that specify 50:1.\u003c\/li\u003e\n  \u003cli\u003eGood choice for seasonal maintenance and topping up mixed fuel cans.\u003c\/li\u003e\n  \u003cli\u003eConvenient for pros and homeowners who mix fuel on site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much mixed fuel will a single bottle yield and how should I store it?\u003c\/h3\u003e\n\u003cp\u003eA 16 oz bottle yields about six gallons of 50:1 premix, making it a practical size for most jobs without excess leftover oil. Store the bottle upright, in a cool, dry place away from direct sunlight and heat sources, and keep the cap secured to prevent contamination or evaporation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximately 6 gallons of premix per bottle at 50:1 ratio.\u003c\/li\u003e\n  \u003cli\u003eStore sealed and upright to preserve product integrity.\u003c\/li\u003e\n  \u003cli\u003eKeep away from open flames and temperatures above recommended storage limits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ECHO Powerblend Gold 16 oz is tailored to landscapers, contractors, and homeowners who use two-stroke handheld equipment and want an easy, accurate way to prepare 50:1 premix. If you need a portable, spill-resistant bottle that yields enough mixed fuel for multiple jobs without bulk storage, this size and package format are a practical match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much mixed fuel does one 16 oz bottle make at 50:1?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 16 oz bottle mixes about six gallons of fuel when using a 50:1 gasoline-to-oil ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I pour directly from this bottle into my tool’s fuel tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the squeeze spout allows controlled pouring, but use a funnel for direct tank fills to avoid spills.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54194023006392,"sku":"B008DRJI3C","price":50.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-powerblend-gold-front-packaging.jpg?v=1790568530"},{"product_id":"husqvarna-xp-synthetic-blend-2-cycle-oil-3-pack-3-x-2-6-oz-bottles-with-funnel-pre-measured-for-2-stroke-engines","title":"Husqvarna XP Synthetic Blend 2-Cycle Oil 3-Pack — 3 x 2.6 oz Bottles with Funnel, Pre-Measured for 2-Stroke Engines","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna 3-Pack XP Synthetic Blend 2-Cycle Oil delivers pre-measured, high-performance lubrication for small two-stroke engines in a compact three-bottle set with a handy funnel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese three 2.6 oz bottles of XP Synthetic Blend 2-Cycle Oil are designed to mix cleanly with fuel for handheld outdoor power tools and other two-stroke equipment. Each bottle is formulated to blend easily at recommended ratios and supplied with a Power Performance funnel to simplify pouring and reduce spills. The pack is sized to cover routine refueling needs without carrying oversized containers and is suitable for seasonal maintenance or jobs where precise pre-measured oil is preferred.\u003c\/p\u003e\n\n\u003ch3\u003eHow much fuel does each 2.6 oz bottle mix with?\u003c\/h3\u003e\n\u003cp\u003eEach Husqvarna 2.6 oz bottle is pre-measured to mix with one gallon of gasoline at the manufacturer-recommended ratio. The volume supports consistent fuel\/oil ratios without measuring tools, reducing the chance of over- or under-lubrication when following engine specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEach bottle mixes with 1 gallon of gas.\u003c\/li\u003e\n  \u003cli\u003eThree bottles provide three gallons of pre-mixed fuel capacity.\u003c\/li\u003e\n  \u003cli\u003eIdeal for spot jobs and seasonal refills without excess leftover oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment is this synthetic blend oil suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe XP Synthetic Blend is formulated for two-stroke engines found in chainsaws, trimmers, blowers and similar handheld machines. It works where manufacturers specify a high-quality synthetic blend or standard two-cycle oil, but always follow the equipment maker’s ratio and oil type recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for handheld two-stroke tools like chainsaws and trimmers.\u003c\/li\u003e\n  \u003cli\u003eCompatible with engines that accept synthetic-blend two-cycle oils.\u003c\/li\u003e\n  \u003cli\u003eGood for both everyday yard tasks and professional outdoor work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the included funnel improve refueling?\u003c\/h3\u003e\n\u003cp\u003eThe Power Performance funnel reduces spills and helps direct oil accurately into fuel containers or mixing bottles. Its compact size pairs with the pre-measured bottles to make mixing faster and cleaner on the job or in the garage, especially when working outdoors or in tight spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces waste and keeps hands and equipment cleaner.\u003c\/li\u003e\n  \u003cli\u003eFits the bottle opening and most small fuel containers for precise pouring.\u003c\/li\u003e\n  \u003cli\u003ePortable and easy to store with the three-bottle pack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and use these bottles safely?\u003c\/h3\u003e\n\u003cp\u003eKeep bottles sealed and stored away from direct heat and open flames; store in a cool, dry place out of reach of children. When mixing, follow engine manufacturer ratio instructions exactly and use the funnel to avoid spills; dispose of empty containers according to local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore sealed in a cool, ventilated area away from ignition sources.\u003c\/li\u003e\n  \u003cli\u003eUse the funnel for accurate pouring and to minimize fuel contamination.\u003c\/li\u003e\n  \u003cli\u003eDispose of empty bottles and residual fuel following local environmental rules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 3-pack is aimed at homeowners, landscapers and pros who want controlled, portable dosing of two-cycle oil for outdoor power equipment. It suits anyone who prefers pre-measured bottles to streamline refueling, reduce measuring mistakes and keep a compact supply for fieldwork or seasonal maintenance. If you run multiple small engines or need a tidy, transportable oil option that pairs with a spill-reducing funnel, this Husqvarna pack is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can each bottle be mixed with any ratio?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each 2.6 oz bottle is pre-measured to mix with one gallon of gasoline at standard manufacturer ratios.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil suitable for professional use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this synthetic blend is appropriate for professional handheld two-stroke tools when used per engine specifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54194092179640,"sku":"B0DW5DCYZP","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-front-packaging-3-pack-xp-oil.jpg?v=1790569122"},{"product_id":"toro-sae-30-small-engine-summer-oil-18-oz-bottle-single-grade-easy-pour","title":"Toro SAE 30 Small-Engine Summer Oil 18 oz Bottle — Single-Grade, Easy-Pour","description":"\u003cp\u003e\u003cstrong\u003eToro LWNMR SAE30 18oz summer oil is a single-grade engine lubricant formulated for small gasoline engines in warm-weather use, supplied in a convenient 20-ounce bottle (part #38916).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis oil is designed for everyday maintenance of walk-behind mowers, garden tractors, and other small-engine equipment that call for SAE 30 viscosity during warmer months. Packaged by Toro in an easy-pour container, it helps maintain lubrication, reduce wear, and support reliable starts and smooth operation when ambient temperatures are within the recommended range for single-grade oil.\u003c\/p\u003e\n\n\u003ch3\u003eWhen should I use SAE 30 oil in my lawn mower?\u003c\/h3\u003e\n\u003cp\u003eUse SAE 30 when your mower manufacturer recommends a single-grade oil for warm-weather operation—typically above about 40°F (4°C). It’s intended for steady summer temperatures where multi-viscosity oils aren’t required for cold starts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest for sustained warm-weather use above roughly 40°F (4°C).\u003c\/li\u003e\n  \u003cli\u003eSuitable for many flat-tappet and overhead-valve small engines.\u003c\/li\u003e\n  \u003cli\u003eGood choice when your owner’s manual specifies SAE 30.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Toro LWNMR SAE30 18oz make maintenance easier?\u003c\/h3\u003e\n\u003cp\u003eThe bottle size and pour spout are built for straightforward oil changes without excess mess. The 20-ounce container typically covers a single drain and refill for many push mowers, reducing leftover waste and simplifying storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact 20-ounce bottle fits easily in a tool cabinet or garage shelf.\u003c\/li\u003e\n  \u003cli\u003eWide neck and pour-friendly design cut down on spills.\u003c\/li\u003e\n  \u003cli\u003eSingle-use quantity for many small-engine oil capacities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance characteristics should I expect from this product?\u003c\/h3\u003e\n\u003cp\u003eToro’s SAE 30 for small engines provides stable film strength and helps protect metal parts under normal summer operating conditions. It supports consistent oil pressure and reduces friction during typical mowing tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-grade SAE 30 viscosity for steady high-temperature protection.\u003c\/li\u003e\n  \u003cli\u003eFormulated for everyday mowing workloads and routine engine speeds.\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical small engine seals and components when used as directed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any storage or compatibility tips I should know?\u003c\/h3\u003e\n\u003cp\u003eStore the bottle upright in a cool, dry place away from direct sunlight and extreme heat. Always follow your engine manufacturer’s recommendations; if the manual calls for multi-grade oils or synthetic blends, choose the specified product instead.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep container sealed to prevent contamination and oil breakdown.\u003c\/li\u003e\n  \u003cli\u003eDo not use SAE 30 in cold climates where multi-grade oil is required.\u003c\/li\u003e\n  \u003cli\u003eCheck the owner’s manual and oil-cap markings before topping up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Toro LWNMR SAE30 18oz summer oil is aimed at homeowners, landscapers, and small-engine technicians who need a straightforward, manufacturer-recommended single-grade lubricant for seasonal mowing tasks. It’s well suited for users who prefer a purpose-sized bottle for one-service fills, those maintaining older engines that specify SAE 30, and anyone looking for a trusted branded oil option from Toro for warm-weather upkeep.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this SAE 30 oil year-round?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. SAE 30 is best for warm weather. Use multi-grade oil during cold seasons if your manual recommends it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will one 20-ounce bottle be enough for my mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes for many push mowers, but always check your engine’s oil capacity in the owner’s manual first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Toro","offers":[{"title":"Default Title","offer_id":54194153160888,"sku":"B00VNZU5R4","price":48.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/toro-lwnmr-sae30-front-packaging.jpg?v=1790570217"},{"product_id":"briggs-stratton-2-cycle-engine-oil-16-oz-easy-mix-ashless-high-temp-formula-with-built-in-stabilizer","title":"Briggs \u0026 Stratton 2-Cycle Engine Oil 16 oz — Easy-Mix Ashless High-Temp Formula with Built-In Stabilizer","description":"\u003cp\u003e\u003cstrong\u003eBriggs \u0026amp; Stratton 100036 is a 16 oz easy-mix 2-cycle engine oil formulated for high-temperature, air-cooled engines and contains a built-in fuel stabilizer for cleaner burns and reduced deposits.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 16-ounce bottle supplies a premium ashless lubricant designed for small engines that operate at high RPM and elevated temperatures. The formulation targets air-cooled two-stroke motors found in equipment like string trimmers, leaf blowers, chainsaws and multi-tool powerheads. It pairs convenience features—an easy-pour tip and built-in measurement markings—with additives intended to minimize residue, fouling and fuel breakdown during short-term storage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil protect high-rpm air-cooled engines?\u003c\/h3\u003e\n\u003cp\u003eThe formula is developed to tolerate higher combustion chamber temperatures typical of two-stroke air-cooled engines. Ashless additives are chosen to burn cleanly so carbon build-up and sticky deposits are reduced, helping maintain spark plug performance and exhaust ports. Proper lubrication also lowers friction and wear on piston rings and bearings during heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature base formulation to resist thermal breakdown\u003c\/li\u003e\n  \u003cli\u003eAshless additive package for cleaner combustion and fewer deposits\u003c\/li\u003e\n  \u003cli\u003eReduces friction on moving parts to extend component life\u003c\/li\u003e\n  \u003cli\u003eSuitable for tools run at high RPM and repeated short jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mix Briggs \u0026amp; Stratton 2-Cycle Oil for routine fueling?\u003c\/h3\u003e\n\u003cp\u003eMixing is straightforward thanks to the bottle’s pour tip and volume markings. The oil supports mix ratios up to 50:1; follow your equipment manufacturer’s recommended ratio and measure precisely to ensure correct lubrication. For best results, pour oil into gasoline before adding to the tool’s tank and agitate the fuel can to homogenize the blend.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes easy-measure markings for accurate ratios\u003c\/li\u003e\n  \u003cli\u003eSupports up to a 50:1 gasoline-to-oil mix when specified\u003c\/li\u003e\n  \u003cli\u003ePour oil into fuel can first, then add gasoline and mix well\u003c\/li\u003e\n  \u003cli\u003eUse the full 16 oz bottle for multiple small-tool top-ups or partial filling of 5-gallon cans\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil help prevent fuel degradation during storage?\u003c\/h3\u003e\n\u003cp\u003eThe product contains built-in fuel-stabilizing ingredients intended to slow fuel oxidation and varnish formation for short-term storage. That helps keep carburetors and fuel lines cleaner when tools sit unused between jobs. For longer storage periods, pair with manufacturer-recommended fuel stabilizers and follow winterizing guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated stabilizer reduces fuel breakdown and varnish buildup\u003c\/li\u003e\n  \u003cli\u003eHelps prevent spark plug fouling and clogged jets during intermittent use\u003c\/li\u003e\n  \u003cli\u003eBest for short-term storage; follow extended storage procedures when needed\u003c\/li\u003e\n  \u003cli\u003eMakes routine maintenance simpler for seasonal equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Briggs \u0026amp; Stratton 100036 16 oz 2-Cycle Engine Oil is aimed at homeowners, landscapers and weekend gardeners who use small, high-speed two-stroke tools and want an easy-to-measure, ashless oil that handles elevated engine temperatures and helps keep fuel systems cleaner. It’s useful for anyone who refuels multiple handheld tools or tops off 5-gallon cans and prefers a compact, branded lubricant designed specifically for air-cooled two-stroke applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mix ratios does Briggs \u0026amp; Stratton 2-cycle oil support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This oil supports mix ratios up to 50:1; follow your engine maker’s recommended ratio for best performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil for seasonal storage of my small engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It contains a fuel stabilizer for short-term storage, but for long-term layup follow full winterizing steps and extra stabilizers if recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Briggs \u0026 Stratton","offers":[{"title":"Default Title","offer_id":54194261033144,"sku":"B000I16K32","price":50.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/briggs-stratton-front-packaging.jpg?v=1790572385"},{"product_id":"showingo-1l-2-stroke-fuel-mixing-bottle-for-chainsaws-trimmers-clear-ratio-marks-leak-resistant-spout","title":"showingo 1L 2-Stroke Fuel Mixing Bottle for Chainsaws Trimmers — Clear Ratio Marks, Leak-Resistant Spout","description":"\u003cp\u003e\u003cstrong\u003eThe showingo 1L 2-Stroke Engines Oil Fuel Mixing Bottle is a reusable, clearly marked container for accurately mixing oil and petrol in 50:1, 40:1, 32:1, or 25:1 ratios.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMixing the correct fuel-to-oil ratio is essential for 2-stroke engines in garden and outdoor power tools. This compact 1-litre bottle from showingo is built for repeated use, with visible ratio markings and a durable spout that reduces spills. It’s designed to fit roadside, shed, or workshop use so you can prepare fuel for chainsaws, trimmers, brushcutters and more without guessing or waste.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bottle make mixing fuel simpler?\u003c\/h3\u003e\n\u003cp\u003eThe showingo bottle has printed measurement lines and ratio guides that let you measure both petrol and 2-stroke oil directly in the bottle. Instead of juggling separate measuring cups or estimating by eye, you pour to the mark and invert to mix, saving time and reducing mess.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClear markings for 50:1, 40:1, 32:1 and 25:1 mixes\u003c\/li\u003e\n  \u003cli\u003e1-litre capacity avoids overfilling while covering most small jobs\u003c\/li\u003e\n  \u003cli\u003eSingle container eliminates transfer between vessels\u003c\/li\u003e\n  \u003cli\u003eLeak-resistant spout for controlled pouring into small fuel tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this bottle work with my chainsaw, trimmer, or lawn tool?\u003c\/h3\u003e\n\u003cp\u003eYes — it’s made for a wide range of 2-stroke garden engines that require premixed fuel. The printed ratios and litre capacity suit common small-engine requirements so you can prepare the correct mix for most consumer and professional handheld equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with chainsaws, brushcutters, trimmers, hedge trimmers, and leaf blowers\u003c\/li\u003e\n  \u003cli\u003eUseful for both petrol and synthetic 2-stroke oils\u003c\/li\u003e\n  \u003cli\u003ePortable size fits tool bags or workshop shelves\u003c\/li\u003e\n  \u003cli\u003eDurable material withstands multiple mixing cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and care for the mixing bottle safely?\u003c\/h3\u003e\n\u003cp\u003ePour the measured petrol and oil to the marked ratio, close the cap, then invert and swirl to combine—no tools required. After use, rinse with a small amount of fresh petrol or approved solvent, let it dry, and store away from heat sources to maintain markings and material integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways mix outdoors or in well-ventilated areas\u003c\/li\u003e\n  \u003cli\u003eKeep away from sparks, open flames, and high temperatures\u003c\/li\u003e\n  \u003cli\u003eClean residue promptly to prevent clogged spouts\u003c\/li\u003e\n  \u003cli\u003eLabel bottle if storing a prepared mix for more than a few days\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The showingo 1L 2-Stroke Engines Oil Fuel Mixing Bottle is aimed at homeowners, gardeners, landscapers, and small-engine professionals who value accuracy, portability, and a reusable solution for preparing fuel. If you work with chainsaws, brushcutters, strimmers or other 2-stroke equipment and want to avoid guesswork, spills and wasted oil, this compact bottle gives a simple, repeatable way to get the right mix every time.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What ratios can I mix with this bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The bottle includes markings for 50:1, 40:1, 32:1 and 25:1 fuel-to-oil ratios.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the bottle reusable and easy to clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s reusable; rinse with fresh petrol or approved solvent after use and dry before storing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"showingo","offers":[{"title":"Default Title","offer_id":54194343936184,"sku":"B0F9L8CYL2","price":47.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/showingo-front-packaging-1l-mixing-bottle.jpg?v=1790573963"},{"product_id":"stp-10w-30-small-engine-motor-oil-32-fl-oz-synthetic-blend-for-lawnmowers-anti-wear-protection","title":"STP 10W-30 Small-Engine Motor Oil 32 fl oz — Synthetic Blend for Lawnmowers \u0026 Anti-Wear Protection","description":"\u003cp\u003e\u003cstrong\u003eSTP Premium Synthetic Blend 4‑Cycle SAE 10W‑30 is a versatile small‑engine motor oil designed to protect and improve performance in lawnmowers, generators, tractors, and other outdoor power equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you maintain a residential lawn or run heavy outdoor equipment, the right oil keeps engines running smoothly through temperature swings and seasonal storage. This STP 10W‑30 synthetic blend balances cold‑start protection with high‑temperature stability, includes anti‑wear and detergent additives, and is packaged in a convenient 32 fl oz bottle for routine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil help during cold starts and seasonal use?\u003c\/h3\u003e\n\u003cp\u003eThis 10W‑30 formulation eases starting in cooler weather while remaining stable at operating temperature. The multi‑viscosity grade helps the oil flow quickly on startup and still provide a protective film when engines heat up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10W low‑temperature flow for quicker circulation at startup\u003c\/li\u003e\n  \u003cli\u003eViscosity index improver for consistent lubrication across temps\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitor to protect components during storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it reduce engine wear and buildup?\u003c\/h3\u003e\n\u003cp\u003eSTP Premium Synthetic Blend contains anti‑wear agents and detergents that minimize component wear and help limit carbon and sludge accumulation. These additives promote cleaner internal parts, which supports longer equipment life when used per maintenance schedules.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti‑wear chemistry to reduce friction on moving parts\u003c\/li\u003e\n  \u003cli\u003eDetergents that help control carbon and deposits\u003c\/li\u003e\n  \u003cli\u003eAntioxidants that resist thermal breakdown at higher temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines are compatible with this 10W‑30 small‑engine oil?\u003c\/h3\u003e\n\u003cp\u003eThis oil is formulated for a wide range of 4‑cycle small engines commonly found in outdoor power equipment. Always verify the required oil grade in the owner’s manual before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLawnmowers (push and riding mowers) specifying 10W‑30\u003c\/li\u003e\n  \u003cli\u003ePortable generators and utility engines with 4‑cycle oil needs\u003c\/li\u003e\n  \u003cli\u003eTractors, snow blowers, and other outdoor equipment listing SAE 10W‑30\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and store the oil for best results?\u003c\/h3\u003e\n\u003cp\u003eFollow your equipment manufacturer’s oil‑change intervals and check levels regularly. Store the sealed bottle in a cool, dry spot away from direct sunlight to maintain additive effectiveness until needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChange oil according to the owner’s manual recommendations\u003c\/li\u003e\n  \u003cli\u003eKeep bottle sealed and upright to avoid contamination\u003c\/li\u003e\n  \u003cli\u003eStore between frost‑free temperatures to prevent viscosity shifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: STP Premium Synthetic Blend 10W‑30 is intended for homeowners, landscapers, and small‑equipment operators who want a reliable, all‑season oil that balances cold‑start performance with protection at operating temperature. It suits anyone maintaining 4‑cycle lawnmowers, portable generators, tractors, snow blowers, and similar outdoor power equipment where SAE 10W‑30 is recommended. Always consult your engine’s manual to confirm compatibility and service intervals before switching oils.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is STP 10W‑30 suitable for winter use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 10W cold‑start rating and viscosity improvers help startup and operation across colder temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in generators and tractors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated for many 4‑cycle small engines including generators, tractors, and snow blowers when 10W‑30 is specified.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"STP","offers":[{"title":"Default Title","offer_id":54194359075000,"sku":"B07SD97NW4","price":52.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/stp-front-label-32oz-bottle.jpg?v=1790574268"},{"product_id":"sanbaiyi-2-stroke-fuel-mixing-bottle-1l-precision-ratio-marks-50-1-25-1-leakproof-cap","title":"sanbaiyi 2-Stroke Fuel Mixing Bottle 1L — Precision Ratio Marks (50:1–25:1) \u0026 Leakproof Cap","description":"\u003cp\u003e\u003cstrong\u003esanbaiyi's 1-liter 2-stroke mixing bottle gives you fast, repeatable gas-and-oil mixes using four precise ratio markings so engines get the right blend every time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMixing fuel for small two-stroke engines should be quick, accurate and mess-free. This reusable 1L container is molded from fuel-resistant plastic and stamped with high-contrast lines for 50:1, 40:1, 32:1 and 25:1 ratios, so you measure oil first and then pour gasoline to the corresponding mark. A screw-on cap seals tightly for safe storage of leftover premix, and the compact shape slips easily into a toolbox, van or workshop shelf.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the bottle make correct mixes without calculations?\u003c\/h3\u003e\n\u003cp\u003eThe bottle’s four visible fill lines correspond to common manufacturer ratios, letting you add the exact amount of 2-stroke oil and then top up with gasoline to the chosen mark. This removes mental math and reduces the chance of over- or under-oiling engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-marked lines for 50:1, 40:1, 32:1 and 25:1 ratios\u003c\/li\u003e\n  \u003cli\u003eHigh-contrast scale readable in low light or outdoors\u003c\/li\u003e\n  \u003cli\u003eAdd oil first, then pour gasoline to the mark for consistent results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the bottle withstand repeated contact with fuel and oil?\u003c\/h3\u003e\n\u003cp\u003eYes — sanbaiyi uses chemical- and oil-resistant plastic so the bottle won’t warp, crack or leak under normal use. The material was selected to tolerate gasoline and two-stroke oil exposure while preserving the accuracy of the printed scale.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction designed for repeated mixing sessions\u003c\/li\u003e\n  \u003cli\u003eResistant to chemical degradation from fuels and additives\u003c\/li\u003e\n  \u003cli\u003eScrew cap designed to prevent seepage and evaporation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and practical is this bottle for everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe 1L capacity provides enough premix for short tasks while staying compact enough for a tool bag, truck, or garage shelf. Its dimensions make it easy to store next to other maintenance items and quick to grab on a job site or weekend yard project.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHolds one liter while remaining space-saving\u003c\/li\u003e\n  \u003cli\u003eLightweight for carrying between jobs or across a yard\u003c\/li\u003e\n  \u003cli\u003eReusable design reduces waste compared with disposable containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and tools is this bottle suited for?\u003c\/h3\u003e\n\u003cp\u003eThis mixing bottle works with most small two-stroke equipment where precise fuel\/oil ratios matter. It’s intended for general fueling assistance and not as a certified replacement for manufacturer-specified dispensers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChainsaws, string trimmers and leaf blowers\u003c\/li\u003e\n  \u003cli\u003eBrush cutters, hedge trimmers and small garden tools\u003c\/li\u003e\n  \u003cli\u003eHomeowner and professional landscaping tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The sanbaiyi 1L mixing bottle fits homeowners who maintain yard tools, hobbyists working with small two-stroke motors, and landscaping professionals seeking a compact, repeatable way to prepare premix. If you want fewer measurement mistakes, less mess, and a reliable container built to resist fuel and oil, this bottle provides a straightforward solution that saves time and helps extend engine life when used according to equipment manufacturers’ guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I store mixed fuel in this bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The screw cap seals to reduce evaporation and spills; store premix in a cool, ventilated place and follow engine manufacturer storage guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which ratios are on the bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The bottle is marked for 50:1, 40:1, 32:1 and 25:1 fuel-to-oil ratios for common two-stroke engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"sanbaiyi","offers":[{"title":"Default Title","offer_id":54194476155064,"sku":"B0BNXCTCZK","price":47.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/sanbaiyi-front-view-bottle.jpg?v=1790575994"},{"product_id":"oriental-power-a100626-carburetor-kit-for-79-80cc-champion-powermate-gaskets-filter-spark-plug","title":"Oriental Power A100626 Carburetor Kit for 79–80cc Champion \u0026 Powermate — Gaskets, Filter, Spark Plug","description":"\u003cp\u003e\u003cstrong\u003eThis Oriental Power A100626 carburetor kit replaces worn carburetors on select 80cc Champion portable generators and 79cc Powell\/Powermate edgers, restoring reliable fuel delivery and easier starting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a small 4‑cycle engine begins to run rough, stall, or refuses to idle, the carburetor and related fuel components are often the cause. The Oriental Power A100626 kit supplies a direct-fit aftermarket carburetor plus essential accessories — gaskets, fuel line, filter and a spark plug — to help you get your generator or lawn edger back to dependable operation without buying a whole new unit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines are compatible with this A100626 carburetor?\u003c\/h3\u003e\n\u003cp\u003eThis replacement targets a range of small gasoline engines used in portable generators and edgers. It lists fitment for Champion portable generators (models such as 42432, 42436 and 62422) and 79cc edgers including Coleman Powermate PWLE0799 and several Homelite\/Southland variants. Check the mounting hole dimensions and part numbers to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChampion generator models: 42432, 42436, 62422 and related numbers\u003c\/li\u003e\n  \u003cli\u003eColeman Powermate edger: PWLE0799 \/ PWLE 0799F2N\u003c\/li\u003e\n  \u003cli\u003eHomelite and Southland edger references: UT13140, HGCA5700, UT905700\u003c\/li\u003e\n  \u003cli\u003eAftermarket cross-reference numbers: A100626 and 099958002087\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware comes in the kit and what are the exact sizes?\u003c\/h3\u003e\n\u003cp\u003eThe kit is packaged to put you straight back to work: the carburetor plus two gaskets, a length of fuel hose, an inline fuel filter and a replacement spark plug. Key mounting dimensions are supplied so you can confirm physical compatibility with your engine's intake manifold and choke linkage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 carburetor, 2 gaskets, 1 fuel line, 1 fuel filter, 1 spark plug\u003c\/li\u003e\n  \u003cli\u003eCarb center mounting hole spacing: 37 mm (1.45\")\u003c\/li\u003e\n  \u003cli\u003eCarburetor core hole diameter: 15 mm (0.59\")\u003c\/li\u003e\n  \u003cli\u003eChoke hole diameter: 22 mm (0.86\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this carburetor affect performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a clogged or damaged carburetor restores proper air–fuel mixture and can eliminate hard starts, surging, and poor idling. Using the supplied fuel filter and fresh fuel line reduces the chance of debris reaching the carburetor, while a new spark plug helps ensure consistent ignition. Routine inspection and fuel stabilization will extend the life of replacement parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent fuel delivery and smoother idle\u003c\/li\u003e\n  \u003cli\u003eIncluded fuel filter prevents new contamination\u003c\/li\u003e\n  \u003cli\u003eNew spark plug improves ignition reliability\u003c\/li\u003e\n  \u003cli\u003eFresh fuel line reduces leaks and perished hose issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: DIY mechanics, landscapers and generator owners who need a cost‑effective replacement for a failing carburetor on small 4‑cycle engines. If your Champion 80cc generator or 79cc edger shows symptoms like fuel leakage, stalling, hard starting or inconsistent idle and the mounting dimensions match, this Oriental Power A100626 kit provides the parts needed to perform a successful repair without buying OEM components. It’s best suited for users comfortable with basic small-engine maintenance and installation of gaskets, fuel lines and a spark plug.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor a direct replacement for Champion 80cc generators?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it lists fitment for Champion models like 42432\/42436\/62422, but confirm the 37mm mounting spacing and hole sizes match your engine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to replace the carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the carburetor, two gaskets, fuel line, fuel filter and a spark plug; no specialty tools are included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oriental Power","offers":[{"title":"Default Title","offer_id":54194555584696,"sku":"B0DJQ91WNQ","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oriental-power-carburetor-front-view.jpg?v=1790577219"},{"product_id":"opti-2-2-cycle-engine-lubricant-6-pack-1-8-oz-enviro-formula-pre-measured-low-smoke-protection","title":"Opti-2 2-Cycle Engine Lubricant 6-Pack 1.8 oz Enviro Formula — Pre-Measured, Low-Smoke Protection","description":"\u003cp\u003e\u003cstrong\u003eOpti-2 20612 is a six-pack of 1.8-ounce Enviro Formula 2-cycle engine lubricant pouches designed to deliver low-smoke mixing and reliable protection for small gasoline engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact 6-pack contains single-use 1.8 oz pouches of Opti-2 Enviro Formula, formulated for general-purpose 2-cycle machines. Each pouch is pre-measured for easy mixing with fuel, reducing guesswork and mess while aiming to lower visible exhaust smoke and keep engine temperatures down. The product suits handheld and small portable equipment where convenience, clean operation, and consistent oil-to-fuel ratios matter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat engines work with this 2-cycle lubricant?\u003c\/h3\u003e\n\u003cp\u003eOpti-2 Enviro Formula is intended for the full range of air-cooled 2-stroke engines commonly found in lawn and garden equipment. It’s formulated as a general-purpose mix oil where manufacturers accept conventional 2-cycle oils.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHandheld tools: string trimmers, leaf blowers, hedge trimmers\u003c\/li\u003e\n  \u003cli\u003eSmall power equipment: chainsaws, portable generators, pressure washers\u003c\/li\u003e\n  \u003cli\u003eAir-cooled 2-cycle outboard or off-road applications where recommended\u003c\/li\u003e\n  \u003cli\u003ePre-measured pouches for consistent oil-to-fuel ratios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Opti-2 reduce smoke and operating temperature?\u003c\/h3\u003e\n\u003cp\u003eThe Enviro Formula is blended to combust more cleanly than many standard 2-cycle oils, which can reduce visible smoke and limit soot buildup. Improved combustion characteristics help engines run cooler and can reduce residues that form during break-in.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCleaner-burning formula lowers visible exhaust emissions\u003c\/li\u003e\n  \u003cli\u003eFormulation helps control carbon deposits in the combustion chamber\u003c\/li\u003e\n  \u003cli\u003eDesigned to contribute to slightly lower operating temperatures\u003c\/li\u003e\n  \u003cli\u003eIntended to shorten break-in effects versus heavier, unrefined oils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the 1.8 oz pouches correctly?\u003c\/h3\u003e\n\u003cp\u003eEach 1.8-ounce pouch is a single-use dose designed to be mixed directly with fuel in the correct ratio for your engine. Follow the engine manufacturer’s oil-to-fuel ratio and pour the full pouch into the specified amount of gasoline, then shake or stir before filling the equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your equipment’s required oil-to-fuel ratio in the owner’s manual\u003c\/li\u003e\n  \u003cli\u003ePour entire 1.8 oz pouch into measured gasoline container\u003c\/li\u003e\n  \u003cli\u003eMix thoroughly before adding to the engine’s fuel tank\u003c\/li\u003e\n  \u003cli\u003eStore unopened pouches in a cool, dry place away from direct sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of buying the 6-pack?\u003c\/h3\u003e\n\u003cp\u003eBuying Opti-2 in a six-pack offers convenience and cost-efficiency for regular users, season starters, or service shops. The pre-measured pouches eliminate measuring errors, reduce spillage, and keep storage space minimal compared with bottles and measuring tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix single-use pouches reduce waste and measurement mistakes\u003c\/li\u003e\n  \u003cli\u003eCompact packaging is ideal for mobile use or small tool chests\u003c\/li\u003e\n  \u003cli\u003eConsistent dosing helps protect engines from improper mixture ratios\u003c\/li\u003e\n  \u003cli\u003eUseful for homeowners, landscapers, and small equipment technicians\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Opti-2 20612 6-pack is suited for homeowners, landscapers, and light equipment professionals who use a variety of handheld or small 2-cycle machines and want a convenient, pre-measured oil option that prioritizes cleaner combustion and easier mixing. It’s especially useful when you need portable, single-dose lubrication for seasonal startups, remote jobs, or as a tidy shop supply.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Opti-2 Enviro Formula in all 2-cycle engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s formulated for general-purpose air-cooled 2-stroke engines, but always follow your engine maker’s recommended oil-to-fuel ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I mix the 1.8 oz pouch with gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Pour the entire 1.8 oz pouch into the measured gasoline amount per your manual, mix thoroughly, then fill the equipment’s fuel tank.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Opti-2","offers":[{"title":"Default Title","offer_id":54195152421048,"sku":"B00AER9QAE","price":58.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/opti-2-front-pouch.jpg?v=1790582201"},{"product_id":"hipa-gx270-gx240-carburetor-replacement-manual-choke-9hp-8hp-pre-tuned-with-gaskets-filters","title":"Hipa GX270\/GX240 Carburetor Replacement — Manual Choke 9HP\/8HP Pre-Tuned with Gaskets \u0026 Filters","description":"\u003cp\u003e\u003cstrong\u003eHipa GX270 9HP carburetor is a ready-to-install manual-choke replacement designed to restore reliable fuel delivery for Honda GX240 and GX270 small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Hipa carburetor assembly is built to match key Honda OEM part numbers used on many GX240 (8HP) and GX270 (9HP) engines, including the 16100-ZE2-W71 and 16100-ZH9-W21 listings. It ships pre-tuned from the factory and includes essential consumables so you can swap the unit and return your engine or pressure washer to service quickly. Before ordering, confirm your engine VIN range and whether the original carburetor uses a manual choke or an automatic choke — this model is a manual choke unit and won’t replace auto-choke variants.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this carburetor fits my Honda GX240 or GX270?\u003c\/h3\u003e\n\u003cp\u003eCheck the OEM numbers on your old carburetor and compare the VIN ranges shown for compatible GX270 types. The Hipa unit is compatible with many GX240 and GX270 variants and lists compatible OEM part numbers to simplify identification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports Honda part numbers: 16100-ZE2-W71 and 16100-ZH9-W21.\u003c\/li\u003e\n  \u003cli\u003eDesigned for specific GX240\/GX270 VIN ranges — verify your engine VIN before purchase.\u003c\/li\u003e\n  \u003cli\u003eManual choke only: not a drop-in for auto-choke carburetors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and is it ready to install?\u003c\/h3\u003e\n\u003cp\u003eThe Hipa kit arrives with the carburetor plus common replacement parts so you can complete the swap without running to the store. The carburetor is factory adjusted and wet-flow tested to simulate operating conditions, reducing time spent on initial tuning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: Hipa GX240\/GX270 carburetor, air filter, spark plug, fuel filter, and three gaskets.\u003c\/li\u003e\n  \u003cli\u003eFactory pre-tuned and wet-flow tested for consistent fuel delivery out of the box.\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires basic hand tools and gasket alignment only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with pressure washers like DeWALT models?\u003c\/h3\u003e\n\u003cp\u003eYes — the Hipa carburetor is compatible with many pressure washers that use Honda GX270 engines. It’s commonly used on professional and consumer cold-water units that rely on the GX270 powerhead, but always verify the original carburetor type and sensor requirements for your machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with DeWALT models using Honda GX270 engines (e.g., DXPW3835, DXPW4035, DXPW60604) that use manual-choke units.\u003c\/li\u003e\n  \u003cli\u003eIf your generator or washer requires a bottom-mounted sensor or specific choke arrangement, confirm fitment before purchase.\u003c\/li\u003e\n  \u003cli\u003eIdeal for units with triplex pumps and 269cc GX270 engines where OEM numbers match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare for installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eTurn off fuel and ensure the engine is cool before removing the old carburetor. Replace gaskets and filters included in the kit, and follow torque specs and routing for fuel lines and linkages to avoid leaks or binding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrain or clamp fuel lines and remove old unit carefully to preserve linkage orientation.\u003c\/li\u003e\n  \u003cli\u003eUse included gaskets and new fuel filter; check spark plug condition and gap as provided.\u003c\/li\u003e\n  \u003cli\u003eAfter install, inspect for fuel leaks and verify choke operation before starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Hipa replacement carburetor is aimed at DIY mechanics, technicians, and equipment owners who need a direct manual-choke replacement for Honda GX240\/GX270 engines — especially users of pressure washers and compact industrial engines. It’s a practical choice when OEM part numbers match and you prefer a pre-tuned unit supplied with replacement consumables to speed up repairs. If your engine uses an automatic choke or a specialized sensor setup, choose a part that specifically matches those requirements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor pre-tuned out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Hipa carburetor arrives factory pre-tuned and wet-flow tested for immediate use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this replace an auto-choke carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This model is a manual choke unit and will not substitute for automatic choke carburetors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hipa","offers":[{"title":"Default Title","offer_id":54195284377784,"sku":"B0CVX2V15Q","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hipa-gx270-front-view_22a9114b-7519-46e1-a807-af49fe44c4f6.jpg?v=1790582928"},{"product_id":"briggs-stratton-2-cycle-oil-6-pack-3-2-oz-bottles-pre-measured-premix-for-2-stroke-engines","title":"Briggs \u0026 Stratton 2-Cycle Oil 6-Pack — 3.2 oz Bottles, Pre-Measured Premix for 2-Stroke Engines","description":"\u003cp\u003e\u003cstrong\u003eBriggs \u0026amp; Stratton 6-Pack 2-Cycle Oil (3.2 oz bottles) provides pre-measured, manufacturer-recommended oil for two-stroke engines to simplify fuel mixing and protect engine components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis bundle supplies six single-use bottles of Briggs \u0026amp; Stratton 2-cycle premix oil (part 100107), each measured to mix with common small-engine fuel volumes. Designed for handheld yard tools, compact generators, and other small two-stroke engines, these compact bottles remove the guesswork from mixing and cut down on spills and waste. The pack fits easily in a tool bag or workshop shelf so you can top up fuel mixes whenever needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow much fuel does each 3.2 oz bottle mix?\u003c\/h3\u003e\n\u003cp\u003eEach 3.2 oz bottle is sized to deliver the right oil quantity for typical mixing ratios. Use the bottle with either a 50:1 or 40:1 fuel-to-oil ratio depending on your equipment’s recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix one 3.2 oz bottle with 1.25 gallons of gasoline for a 50:1 ratio.\u003c\/li\u003e\n  \u003cli\u003eUse one bottle per 1 gallon of gasoline to achieve a 40:1 ratio.\u003c\/li\u003e\n  \u003cli\u003eSingle-use bottle helps avoid overpouring and simplifies measurement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil work with my two-stroke outdoor tools?\u003c\/h3\u003e\n\u003cp\u003eYes — it’s formulated for use in two-cycle engines commonly found in trimmers, blowers, chainsaws, and small generators. Always follow the engine manufacturer’s oil type and mixing ratio recommendations before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for most consumer two-stroke gasoline engines when mixed to the correct ratio.\u003c\/li\u003e\n  \u003cli\u003eConvenient for on-the-job refills and field use where measuring tools aren’t handy.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent oil concentration across fuel batches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of the six-pack format?\u003c\/h3\u003e\n\u003cp\u003eA six-bottle pack balances supply and storage: enough to last through multiple service sessions without occupying much shelf space. The multi-bottle set is cost-effective compared with single purchases and reduces repeated trips to buy oil.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix individually sealed bottles reduce waste and extend shelf life after opening.\u003c\/li\u003e\n  \u003cli\u003eCompact size fits in glovebox, tool tote, or mower compartment for easy access.\u003c\/li\u003e\n  \u003cli\u003ePre-measured doses minimize spills and speed up fuel mixing in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle these bottles safely?\u003c\/h3\u003e\n\u003cp\u003eKeep the bottles in a cool, dry place away from open flames and direct sunlight. Dispose of empty containers and any unused mixed fuel according to local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore upright in a well-ventilated area away from ignition sources.\u003c\/li\u003e\n  \u003cli\u003eDo not puncture or incinerate bottles even when empty; follow disposal rules.\u003c\/li\u003e\n  \u003cli\u003eLabel extra mixed fuel with date and ratio, and use within recommended timeframes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Briggs \u0026amp; Stratton’s 6-pack of 3.2 oz 2-cycle oil is a practical choice for homeowners, landscapers, and small-engine technicians who need accurate, portable oil portions for routine mixing. It’s ideal for anyone who values convenience and consistency when preparing fuel for trimmers, chainsaws, blowers, compact generators, and other two-stroke equipment. If you want pre-measured doses that reduce mess and ensure proper oil concentration, this multipack keeps you stocked and ready on the job or at home.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What ratio does one 3.2 oz bottle make?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 3.2 oz bottle mixes with 1.25 gallons of gas for 50:1 or with 1 gallon for 40:1.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in all two-stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s suitable for most consumer two-stroke engines; always follow your engine manufacturer’s specs first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Briggs \u0026 Stratton","offers":[{"title":"Default Title","offer_id":54195511296184,"sku":"B08XN3FJGT","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/briggs-stratton-front-packaging_c6567b2d-f1e4-4be0-ab6d-9bf152bc8da7.jpg?v=1790583909"},{"product_id":"echo-products-2-stroke-oil-power-blend-gold-6-2-6-fl-oz-semi-synthetic-low-smoke-performance","title":"Echo Products 2-Stroke Oil Power Blend Gold 6×2.6 fl oz — Semi-Synthetic, Low Smoke Performance","description":"\u003cp\u003e\u003cstrong\u003eEcho Power Blend Gold is a semi-synthetic 50:1 two-stroke oil formulated to deliver cleaner burning, reduced smoke, and dependable lubrication for outdoor power tools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium oil mix is engineered for homeowners and professionals who need reliable performance from 2-cycle equipment such as chainsaws, blowers, trimmers, and brushcutters. It meets ISO-L-EGD and JASO M345\/FD specifications and includes detergents and stabilizers that help maintain engine cleanliness and protect internal parts during storage and use. Packaged as six 2.6 fl oz bottles, it’s convenient for mixing fuel at the recommended 50:1 ratio with 89+ octane gasoline.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Echo Power Blend Gold reduce smoke and deposits?\u003c\/h3\u003e\n\u003cp\u003eThe formula emphasizes cleaner combustion through a balance of semi-synthetic base stocks and detergents that minimize residue and smoke output. Lower particulate and deposit formation helps keep exhaust ports and pistons cleaner over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-synthetic blend for more complete combustion and reduced emissions\u003c\/li\u003e\n  \u003cli\u003eDetergent additives combat carbon buildup on pistons and ports\u003c\/li\u003e\n  \u003cli\u003eLower smoke profile helps visibility and reduces staining\u003c\/li\u003e\n  \u003cli\u003eTested to meet ISO-L-EGD and JASO M345\/FD cleanliness standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil protect my engine from rust and wear?\u003c\/h3\u003e\n\u003cp\u003eYes — the blend contains anti-corrosion and high-lubricity additives designed to shield metal surfaces and reduce wear during operation. Regular use supports longer component life and dependable starts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion inhibitors help prevent rust during storage and humid conditions\u003c\/li\u003e\n  \u003cli\u003eEnhanced lubricity reduces friction on pistons and cylinders\u003c\/li\u003e\n  \u003cli\u003eStabilizer extends protection for fuel mixes up to 30+ days\u003c\/li\u003e\n  \u003cli\u003eCompatible with many major 2-stroke equipment brands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mix and use this 50:1 oil for my equipment?\u003c\/h3\u003e\n\u003cp\u003eMix one part oil to fifty parts gasoline — for example, one 2.6 fl oz bottle mixes into roughly one gallon of fuel. Use 89 octane or higher gasoline, shake or agitate the mix before filling the tool, and follow the equipment manufacturer’s instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne bottle (2.6 fl oz) mixes with about 1 gallon of gasoline\u003c\/li\u003e\n  \u003cli\u003eRecommended ratio: 50:1 with 89+ octane fuel\u003c\/li\u003e\n  \u003cli\u003eAgitate or invert the container to ensure even mixing\u003c\/li\u003e\n  \u003cli\u003eUse within the stabilizer-protected window for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and brands are compatible with this oil?\u003c\/h3\u003e\n\u003cp\u003eDesigned for a wide range of two-stroke outdoor power equipment, this oil works in handheld and larger applicances that specify 2-cycle oil at 50:1 or compatible ratios. It’s suitable for both consumer and light commercial machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for chainsaws, blowers, hedge trimmers, brushcutters, and edgers\u003c\/li\u003e\n  \u003cli\u003eCompatible with Echo, Husqvarna, Stihl, Shindaiwa, and similar 2-stroke engines\u003c\/li\u003e\n  \u003cli\u003eWorks where ISO-L-EGD or JASO M345\/FD approvals are required\u003c\/li\u003e\n  \u003cli\u003eSold as a six-count pack of 2.6 fl oz bottles for convenient mixing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Echo Power Blend Gold is suited to homeowners, landscapers, and professionals who need a reliable, lower-smoke two-stroke oil that aids cleanliness and engine longevity. If you want a semi-synthetic option that meets industry cleanliness standards and simplifies on-site mixing with ready-sized bottles, this six-pack provides portable, shelf-stable doses for regular maintenance and seasonal work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in all 2-stroke equipment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use in most 2-stroke outdoor equipment that accepts 50:1 or compatible mixes; always follow your engine maker’s recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does mixed fuel stay stable with this oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The formula contains a stabilizer that helps keep fuel usable for 30+ days, depending on storage conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Echo Products","offers":[{"title":"Default Title","offer_id":54195661242552,"sku":"B098BRM1WJ","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-power-blend-gold-front-packaging.jpg?v=1790584903"},{"product_id":"briggs-stratton-2-cycle-easy-mix-motor-oil-16-oz-bottles-pack-of-2-with-built-in-spout-measuring-tip","title":"Briggs \u0026 Stratton 2‑Cycle Easy Mix Motor Oil — 16 oz Bottles (Pack of 2) with Built‑in Spout \u0026 Measuring Tip","description":"\u003cp\u003e\u003cstrong\u003eBriggs \u0026amp; Stratton 2-Cycle Easy Mix Motor Oil is a premeasured, 16‑ounce bottle designed to simplify fuel mixing for 2‑cycle outdoor power equipment, sold here as a convenient pack of two.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you run a string trimmer, leaf blower, chainsaw, or any 2‑cycle small engine, getting the oil-to-gas ratio right matters for reliable starting and consistent performance. This Briggs \u0026amp; Stratton easy mix oil comes in user-friendly bottles with a built-in spout and measuring tip so you can add the correct amount of oil without separate measuring cups or complicated calculations. The pack of two gives you extra supply on hand and reduces trips to the store during the season.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil make mixing fuel easier?\u003c\/h3\u003e\n\u003cp\u003eThe bottle is engineered with an oil tip and clear measurement markings so you can pour exact quantities directly into the fuel container or mixing bottle. That reduces spills, saves time, and keeps your workspace cleaner compared with loose bottles or improvised measuring tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in oil tip for controlled pouring\u003c\/li\u003e\n  \u003cli\u003eClear ounce markings for accurate metering\u003c\/li\u003e\n  \u003cli\u003eSingle 16 oz size calibrated for common fuel ratios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis 2‑cycle oil is formulated for use in air‑cooled, two‑stroke outdoor power tools and small engines. It’s recommended for brands like Toro, Lawn Boy, and Ryan, and is suitable for other 2‑cycle lawn and garden equipment that specify a non‑automotive two‑stroke oil.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eString trimmers, edgers, and brushcutters\u003c\/li\u003e\n  \u003cli\u003eHandheld blowers and hedge trimmers\u003c\/li\u003e\n  \u003cli\u003eChainsaws and other 2‑cycle handheld tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much oil do I get and why buy the pack of two?\u003c\/h3\u003e\n\u003cp\u003eEach bottle contains 16 ounces of oil, which is enough to mix multiple fuel tanks depending on your engine’s required ratio. Purchasing the two‑pack gives you spare oil for the season, reduces shipping per bottle, and helps ensure you won’t run out mid‑job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 16 oz bottles included in the pack\u003c\/li\u003e\n  \u003cli\u003eSufficient for several fuel mixes at common ratios (e.g., 50:1, 40:1 depending on engine)\u003c\/li\u003e\n  \u003cli\u003eConvenient backup supply for extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and use this oil safely?\u003c\/h3\u003e\n\u003cp\u003eKeep the bottles sealed and stored in a cool, dry place away from open flames and ignition sources. Use the integrated tip to measure oil into a clean fuel container, follow your engine manufacturer’s recommended oil‑to‑fuel ratio, and dispose of any used or contaminated fuel responsibly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore upright in a ventilated, cool area\u003c\/li\u003e\n  \u003cli\u003eUse clean funnels or mixing bottles to prevent contamination\u003c\/li\u003e\n  \u003cli\u003eFollow local regulations for disposal of fuel and oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Briggs \u0026amp; Stratton 2‑Cycle Easy Mix Motor Oil pack is aimed at homeowners, landscapers, and equipment rental operators who want a simple, spill‑reducing solution for mixing fuel for two‑stroke engines. If you use handheld or small outdoor power tools from brands such as Toro, Lawn Boy, Ryan, or similar, and you prefer a premeasured, easy‑to‑pour oil option to keep your equipment running reliably, this two‑pack provides a practical, season‑ready supply.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil suitable for all 2-cycle engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for most air-cooled 2-cycle outdoor engines; always check your engine manual for manufacturer oil recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many fuel tanks can one 16 oz bottle mix?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Depends on ratio: at 50:1 one 16 oz bottle mixes roughly 25 gallons of fuel; at 40:1 it mixes about 20 gallons.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Briggs \u0026 Stratton","offers":[{"title":"Default Title","offer_id":54197254652088,"sku":"B08XN3BDWQ","price":61.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/briggs-stratton-easy-mix-front-packaging.jpg?v=1790588332"},{"product_id":"husqvarna-xp-2-stroke-oil-2-6-oz-bottles-6-pack-premeasured-single-use-for-handheld-tools","title":"Husqvarna XP+ 2-Stroke Oil 2.6 oz Bottles — 6-Pack Premeasured Single-Use for Handheld Tools","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna XP+ 2.6 oz 2-stroke oil comes as a six-bottle pack of genuine Husqvarna lubricant designed for correct premeasured fuel-mix applications in handheld two-stroke equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OEM 2.6-ounce bottles of Husqvarna XP+ 2-stroke oil are supplied in a convenient six-pack so you can mix fresh fuel on site without measuring mistakes or spills. Each bottle contains a concentrated, engine-specific lubricant intended for use where the manufacturer's manual specifies a 2-stroke oil for gasoline-powered outdoor tools. The compact bottle size is ideal for one or two fuel mixes, reducing waste and simplifying transport during long jobs or seasonal maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these single-use bottles make fuel mixing easier?\u003c\/h3\u003e\n\u003cp\u003eThe 2.6 oz bottles are premeasured to match common mix ratios, removing guesswork when combining oil and gasoline. That saves time, avoids over- or under-oiling, and minimizes exposure to spills and odors. The small bottles are also easy to store in a tool bag or glove compartment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremeasured 2.6 oz volume for accurate fuel mixes\u003c\/li\u003e\n  \u003cli\u003eSingle-use bottles reduce leftover-oil waste\u003c\/li\u003e\n  \u003cli\u003eCompact shape fits in small storage compartments\u003c\/li\u003e\n  \u003cli\u003eBulk six-pack reduces trips to buy individual bottles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil work with my Husqvarna handheld equipment?\u003c\/h3\u003e\n\u003cp\u003eHusqvarna XP+ is formulated for two-stroke engines and is intended for use in handheld chainsaws, trimmers, blowers, and other outdoor tools that require 2-stroke oil. Always confirm the exact oil type and mix ratio in your equipment’s owner’s manual before use. Using the genuine Husqvarna product helps match the manufacturer’s lubrication specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many chainsaws, trimmers, and blowers that require 2-stroke oil\u003c\/li\u003e\n  \u003cli\u003eFollow your equipment manual for recommended mix ratio\u003c\/li\u003e\n  \u003cli\u003eGenuine part numbered supply for OEM conformity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle these bottles safely?\u003c\/h3\u003e\n\u003cp\u003eKeep bottles capped and stored upright in a cool, dry place away from direct sunlight and open flames. Dispose of empty containers according to local hazardous-waste guidance; do not puncture or incinerate. For mixing, pour oil into gasoline only in well-ventilated areas and avoid skin contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore upright in sealed original packaging\u003c\/li\u003e\n  \u003cli\u003eKeep away from heat sources and children\u003c\/li\u003e\n  \u003cli\u003eObserve local disposal regulations for used containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the six-pack offer compared with single bottles?\u003c\/h3\u003e\n\u003cp\u003eBuying a six-pack reduces per-bottle cost and ensures you have fresh oil on hand for multiple mixes or a full season of work. It’s also useful for professional users or homeowners who prefer to stock up at once. The bulk pack is labeled as a genuine Husqvarna replacement part for authenticity and traceability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple bottles for extended use or multiple machines\u003c\/li\u003e\n  \u003cli\u003eBetter value than buying singles separately\u003c\/li\u003e\n  \u003cli\u003eNew, bulk packaged for resale or workshop storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This six-pack of Husqvarna XP+ 2.6 oz 2-stroke oil is aimed at homeowners, landscapers, and professional outdoors workers who operate gasoline-powered handheld tools and prefer premeasured, OEM-specified lubrication for precise fuel mixing. If you value convenience, accurate mixes, and genuine Husqvarna parts, this compact six-pack helps keep equipment running with minimal fuss. Always reference your equipment owner’s manual for the correct oil type and mix ratio before use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine Husqvarna replacement part.\u003c\/li\u003e\n  \u003cli\u003eNew, bulk packaged.\u003c\/li\u003e\n  \u003cli\u003eConsult owners manual for proper part number identification and proper installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the volume of each Husqvarna XP+ bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each bottle contains 2.6 ounces of 2-stroke oil, suited for single fuel-mix portions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these bottles for all two-stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re intended for two-stroke handheld equipment; always check your owner’s manual for compatibility and mix ratio.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54198110027960,"sku":"B07BRC62Z4","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-xp-plus-front-packaging.jpg?v=1790589182"},{"product_id":"echo-powerblend-gold-2-stroke-oil-mix-50-1-6-pack-2-6-oz-bottles-semi-synthetic","title":"ECHO PowerBlend Gold 2‑Stroke Oil Mix 50:1 — 6 Pack 2.6 oz Bottles, Semi‑Synthetic","description":"\u003cp\u003e\u003cstrong\u003eECHO PowerBlend Gold 6450001 is a semi‑synthetic 2‑stroke engine oil sold as six 2.6 oz bottles formulated to mix 50:1 with one gallon of 89+ octane gasoline.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep small engines running smoothly by using the factory‑engineered ECHO PowerBlend Gold 2‑stroke oil. This six‑pack provides ready single‑dose bottles designed to produce the correct 50:1 fuel mix for one gallon of gasoline, simplifying fueling for trimmers, blowers, chainsaws and other handheld or small power equipment. The semi‑synthetic formula includes targeted additives that support lubrication, help resist corrosion and reduce exhaust port deposits, while built‑in stabilizers extend mixed fuel life when stored properly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare the correct 50:1 fuel mix with these bottles?\u003c\/h3\u003e\n\n\u003cp\u003eEach 2.6 oz bottle of ECHO PowerBlend Gold is premeasured to mix precisely with one gallon of gasoline at a 50:1 ratio. Use fresh gasoline of 89 octane or higher, pour the bottle into a clean fuel container, then add the gasoline and shake to combine before filling equipment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne 2.6 oz bottle per one gallon of fuel for 50:1 mix accuracy.\u003c\/li\u003e\n  \u003cli\u003eUse gasoline rated 89 octane or greater for optimal performance.\u003c\/li\u003e\n  \u003cli\u003eMix in a sealed, approved fuel container and shake to blend thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engine protection and performance benefits does PowerBlend Gold offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe semi‑synthetic blend delivers consistent lubrication and supplemental additives that reduce wear, inhibit rust and help limit carbon buildup in exhaust ports. These features help maintain performance and extend the life of two‑stroke engines when used as directed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLubricant additives reduce metal‑to‑metal wear in critical engine parts.\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors protect internal surfaces during storage and operation.\u003c\/li\u003e\n  \u003cli\u003eDetergent and deposit‑control agents minimize exhaust port blockages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I store mixed fuel made with these bottles?\u003c\/h3\u003e\n\n\u003cp\u003ePowerBlend Gold includes fuel stabilizers formulated to keep premixed fuel stable for up to one month when kept in a properly sealed container. For best results, store mixed fuel in a cool, dark place and use within the recommended period to avoid degradation in performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMixed fuel stable up to one month in a tightly sealed container.\u003c\/li\u003e\n  \u003cli\u003eStore away from heat and sunlight to preserve fuel and oil integrity.\u003c\/li\u003e\n  \u003cli\u003eLabel containers with mix date for easy rotation and safe use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this oil in different two‑stroke handheld tools and machines?\u003c\/h3\u003e\n\n\u003cp\u003eECHO PowerBlend Gold is designed for a wide range of two‑stroke engines commonly found in outdoor power equipment. Check your machine manufacturer’s recommendations for oil type and mix ratio; use these bottles when a 50:1 ratio is specified.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for trimmers, blowers, chainsaws and similar two‑stroke engines specifying 50:1 mix.\u003c\/li\u003e\n  \u003cli\u003eFollow equipment manual guidance when confirming oil compatibility and octane requirements.\u003c\/li\u003e\n  \u003cli\u003eNot intended for engines that require different oil ratios or four‑stroke lubrication methods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This six‑pack of ECHO PowerBlend Gold 2.6 oz bottles is aimed at homeowners, landscapers and professionals who use multiple handheld or small two‑stroke machines and want a convenient, premeasured solution for accurate 50:1 fuel mixing. It’s especially useful for users who value OEM‑grade lubrication, simple dosing, and short‑term stabilized premixed fuel for jobsite or seasonal tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many bottles are needed per gallon of fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use one 2.6 oz ECHO bottle per one gallon of gasoline to achieve the 50:1 mix ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will mixed fuel last with this oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixed fuel with PowerBlend Gold stays stable up to one month in a properly sealed container.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54199154049208,"sku":"B006ZAMO80","price":55.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-powerblend-gold-front-packaging_20ca7462-5484-4834-9d01-52d19ed45577.jpg?v=1790592359"},{"product_id":"husqvarna-xp-2-cycle-oil-6-pack-6-4-oz-bottles-genuine-oem-two-stroke-lubricant-measured-mix-for-handheld-engines","title":"Husqvarna XP 2-Cycle Oil 6-pack 6.4 oz Bottles — Genuine OEM two-stroke lubricant, measured mix for handheld engines","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna XP 2-Cycle Oil 6.4 oz 6-pack is a genuine OEM two-stroke lubricant designed to mix precisely with gasoline for reliable small-engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis six-pack contains six 6.4-ounce bottles of Husqvarna XP 2-stroke oil — the factory-specified oil intended for handheld and portable Husqvarna engines that require pre-mixing of fuel and oil. Each bottle is measured for easy batch mixing and on-site topping, helping pros and homeowners keep chainsaws, trimmers, blowers, and other two-stroke tools running smoothly. The product ships as a bulk replacement part and should be used following your machine’s owner manual for the correct mix ratio and installation guidelines.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this oil when prepping fuel?\u003c\/h3\u003e\n\n\u003cp\u003eMix Husqvarna XP 2-Cycle Oil with fresh unleaded gasoline at the ratio recommended in your tool’s manual. Shake the oil bottle, pour the measured amount into a clean fuel container, add gasoline, then gently mix to ensure thorough blending.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEach bottle is 6.4 oz — convenient for measuring small or multiple mixes.\u003c\/li\u003e\n  \u003cli\u003eUse a clean, approved fuel container to avoid contamination.\u003c\/li\u003e\n  \u003cli\u003eFollow your engine’s specified fuel-to-oil ratio for best performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does the Husqvarna OEM oil offer for two-stroke engines?\u003c\/h3\u003e\n\n\u003cp\u003eThis is the OEM lubricant formulated to be compatible with Husqvarna’s two-stroke engine tolerances and materials. It supports lubrication of pistons and crankshafts during operation, reduces buildup when used correctly, and aligns with factory maintenance recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory formulation intended for Husqvarna two-stroke engines.\u003c\/li\u003e\n  \u003cli\u003eMeasured bottles simplify precise mixing and reduce waste.\u003c\/li\u003e\n  \u003cli\u003eBulk six-pack keeps spares on hand for repeated jobs or multiple machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I store these bottles and what are the handling recommendations?\u003c\/h3\u003e\n\n\u003cp\u003eStore the sealed bottles in a cool, dry place away from direct sunlight and heat sources to preserve oil quality. Keep containers tightly closed and out of reach of children and pets; dispose of empty bottles responsibly according to local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvoid freezing or prolonged high heat to maintain viscosity and additives.\u003c\/li\u003e\n  \u003cli\u003eKeep original labeling to ensure correct identification and safe handling.\u003c\/li\u003e\n  \u003cli\u003eIf spilled, follow safety data sheet directions for cleanup and ventilation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does buying a six-pack benefit owners and professionals?\u003c\/h3\u003e\n\n\u003cp\u003ePurchasing the six-pack reduces the need for frequent reordering and ensures consistent oil quality across jobs. It’s a practical choice for contractors, landscapers, and homeowners who operate multiple tools or who prefer to stock OEM supplies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCost-effective bulk supply minimizes downtime for refills.\u003c\/li\u003e\n  \u003cli\u003eUniform product across machines helps maintain factory consistency.\u003c\/li\u003e\n  \u003cli\u003eHandy bottle size suits on-site mixing without excess leftover oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This genuine Husqvarna 6-pack is aimed at owners of two-stroke Husqvarna equipment, professional landscapers, rental shops, and DIYers who follow manufacturer maintenance schedules. If you run multiple handheld tools, maintain a fleet of small engines, or want factory-recommended lubricant on hand, these measured 6.4-ounce bottles provide a practical, OEM-aligned solution. Always consult your machine’s owner manual for the correct fuel-to-oil ratio and safe handling instructions before mixing and operating equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mix ratio should I use with Husqvarna XP 2-cycle oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow the fuel-to-oil ratio specified in your Husqvarna equipment manual; ratios vary by model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this the same oil recommended by Husqvarna dealers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this is genuine Husqvarna OEM XP 2-cycle oil sold as the factory replacement product.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54199770480824,"sku":"B07L4X7733","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-xp-2-cycle-oil-front-packaging.jpg?v=1790599328"},{"product_id":"echo-red-armor-2-cycle-engine-oil-1-gal-pack-of-6-oem-jaso-fd-fuel-stabilizer-for-trimmers-chainsaws","title":"ECHO Red Armor 2‑Cycle Engine Oil 1 gal Pack of 6 — OEM JASO FD, Fuel Stabilizer for Trimmers \u0026 Chainsaws","description":"\u003cp\u003e\u003cstrong\u003eECHO Red Armor 1 Gallon 2-cycle oil is a genuine OEM fuel additive and lubricant formulated to clean deposits, stabilize fuel up to two years, and protect air-cooled 2-stroke and hybrid 2\/4-stroke engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eChoose the right oil blend to keep handheld and small-engine equipment running smoothly: ECHO Red Armor combines strong detergency with durable film strength so engines start easier, run cleaner, and require less maintenance. This OEM-grade oil meets JASO FD and ISO L-EGD performance levels and is recommended for air-cooled 2-stroke and 2\/4-stroke (hybrid) engines commonly found in trimmers, blowers, chainsaws, and other outdoor power tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does ECHO Red Armor improve engine starting and performance?\u003c\/h3\u003e\n\u003cp\u003eECHO Red Armor is engineered with detergents that dissolve and remove carbon buildup, while maintaining a lubricating oil film that reduces wear. Cleaner combustion chambers and rings mean quicker starts, steadier idling, and more consistent power under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClears existing carbon deposits for more complete combustion\u003c\/li\u003e\n  \u003cli\u003eMaintains oil film to protect moving parts at high RPM\u003c\/li\u003e\n  \u003cli\u003eHelps reduce fouled spark plugs and smokey exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this oil be used with all 2-stroke outdoor equipment?\u003c\/h3\u003e\n\u003cp\u003eYes — ECHO Red Armor is recommended for use in air-cooled 2-stroke engines and in hybrid 2\/4-stroke designs where a 2-cycle blend is specified. It’s suitable for most handheld and small-engine applications when mixed at the manufacturer’s required fuel-to-oil ratio.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with trimmers, blowers, chainsaws, and edgers\u003c\/li\u003e\n  \u003cli\u003eFollow your equipment’s fuel mix ratio for best results\u003c\/li\u003e\n  \u003cli\u003eOEM part number 6550000 identifies genuine ECHO formulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does ECHO Red Armor help with fuel storage and stability?\u003c\/h3\u003e\n\u003cp\u003eWhen added to fresh fuel, this oil contains stabilizing agents that extend fuel usability for up to two years, reducing varnish and phase separation during storage. Properly stabilized fuel lowers starting problems after seasonal downtime and preserves carburetor and fuel system components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtends usable life of fresh fuel up to two years\u003c\/li\u003e\n  \u003cli\u003eMinimizes gum and varnish formation in fuel systems\u003c\/li\u003e\n  \u003cli\u003eHelps prevent clogged carburetor jets and fuel lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat certifications and performance ratings does it carry?\u003c\/h3\u003e\n\u003cp\u003eECHO Red Armor meets stringent international quality ratings to assure compatibility and protection. These certifications reflect testing for detergency, lubricity, and combustion cleanliness across small-engine conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets JASO FD performance standards for 2-cycle oils\u003c\/li\u003e\n  \u003cli\u003eISO L-EGD rated for small-engine protection\u003c\/li\u003e\n  \u003cli\u003eSold under ECHO OEM part number 6550000 for authenticity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Owners and service professionals who rely on handheld and small engine tools — landscape pros, homeowners with extensive outdoor gear, and maintenance shops — will benefit from ECHO Red Armor’s cleaning detergents, fuel stabilization, and protective lubrication. Use it when you need dependable starting, reduced maintenance downtime, and longer equipment life from air-cooled 2-stroke or hybrid 2\/4-stroke engines. For best results, always mix at the ratio recommended by your equipment maker and store treated fuel in sealed containers away from heat and sunlight.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What engines are compatible with ECHO Red Armor 2-cycle oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s recommended for air-cooled 2-stroke and hybrid 2\/4-stroke engines in handheld outdoor equipment like chainsaws, trimmers, and blowers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does treated fuel stay usable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: When added to fresh fuel, ECHO Red Armor helps stabilize it for up to two years under proper storage conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54199896670392,"sku":"B07M6M2BHR","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-red-armor-front-label.jpg?v=1790602094"},{"product_id":"hz-recoil-starter-assembly-for-kohler-18-165-05-s-sh265-196cc-complete-bolt-on-kit-black-housing","title":"HZ Recoil Starter Assembly for Kohler 18 165 05-S \/ SH265 196cc — Complete Bolt‑On Kit, Black Housing","description":"\u003cp\u003e\u003cstrong\u003eThis HZ SH265 pull-start recoil starter assembly is a direct replacement for Kohler 18 165 05-S (SH265\/SH270\/SH255) engines, restoring reliable manual starting to generators, pressure washers, water pumps, log splitters and similar power equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Kohler 196cc OHV engine has a damaged rope, broken pulley, or a weak recoil spring, this complete assembly offers all necessary parts to get your equipment running again. The kit is designed to match the bolt pattern and fitment of Kohler SH265-series engines and comes with mounting hardware and a carburetor gasket for fast installation. It’s built for outdoor power machines that need a durable, serviceable rewind starter.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this starter assembly fit my Kohler SH265\/SH270\/SH255 engine?\u003c\/h3\u003e\n\u003cp\u003eThe HZ SH265 starter is manufactured to match the dimensions and mounting points used on Kohler 18 165 05-S and related part numbers. It aligns with common SH-series horizontal shaft engines (196cc) used on many brands of small equipment. Confirm compatibility by matching your engine’s model stamp, bolt pattern, and overall starter diameter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Kohler SH265, SH270, SH255 and 18 165 05-S family part numbers.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 196cc OHV horizontal shaft engines (5.5–7 HP ranges).\u003c\/li\u003e\n  \u003cli\u003eIncludes three mounting bolts to match factory bolt spacing.\u003c\/li\u003e\n  \u003cli\u003eCheck engine model tag and starter mounting hole layout before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and what do they do?\u003c\/h3\u003e\n\u003cp\u003eThis replacement comes as a fully assembled recoil starter: rope, handle, pulley, rewind spring and housing. The unit arrives ready to bolt on, and the included carburetor gasket and mounting bolts help address common maintenance needs during installation. All parts are intended to restore the normal pull-start function when your old starter parts are worn or broken.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-wound recoil pulley and rewind spring for immediate operation.\u003c\/li\u003e\n  \u003cli\u003eDurable starter rope with a molded pull handle for ergonomic starting.\u003c\/li\u003e\n  \u003cli\u003eThree mounting bolts and one carburetor gasket for installation convenience.\u003c\/li\u003e\n  \u003cli\u003eBlack housing designed to match OEM dimensions and protect internals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement and what equipment uses it?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses a reinforced pull cord, a robust rewind spring and a molded pulley to withstand repeated starts typical of outdoor power equipment. It’s suitable for generators, pressure washers, compressors, water pumps, log splitters, wood chippers and a wide range of machines that use Kohler SH-series engines. Proper installation and periodic rope and spring inspection will prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed with heavy-duty cord and a corrosion-resistant spring for outdoor use.\u003c\/li\u003e\n  \u003cli\u003eFits multiple equipment types: generators, washers, pumps, splitters, chippers.\u003c\/li\u003e\n  \u003cli\u003eUsed on many OEM and aftermarket machines powered by Kohler SH265-style engines.\u003c\/li\u003e\n  \u003cli\u003eReplacement part for engines showing frayed rope, slipped pulley, or no rewind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic engine maintenance. Remove the old starter, transfer any gasket surfaces if needed, bolt the new assembly in place, and route the rope through the pull hole. Have simple hand tools handy and follow safety steps: disconnect spark plug and secure the equipment before starting work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires standard hand tools—ratchet, sockets, screwdrivers and torque as specified.\u003c\/li\u003e\n  \u003cli\u003eIncluded mounting bolts and carburetor gasket reduce the need for extra parts.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the spark plug and stabilize the engine before replacing the starter.\u003c\/li\u003e\n  \u003cli\u003eCheck rope length and rotation direction to ensure proper recoil action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HZ recoil starter assembly is intended for owners, mechanics and fleet managers of small engine-powered machines who need a dependable, OEM-style replacement for Kohler SH265\/SH270\/SH255 starters. It’s ideal for those repairing generators, pressure washers, log splitters, water pumps or other outdoor equipment that uses the Kohler 196cc horizontal shaft engine and requires a ready-to-install rewind starter to restore manual starting performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my Kohler SH270 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the HZ SH265 starter matches Kohler SH270 and SH265\/SH255 196cc engines with the 18 165 05-S style mounting pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package contains three mounting bolts plus a carburetor gasket to aid installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HZ","offers":[{"title":"Default Title","offer_id":54199904731320,"sku":"B0939ZP1FB","price":75.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hz-sh265-front-view.jpg?v=1790602430"},{"product_id":"husqvarna-hp-2-stroke-premix-oil-6-4-oz-bottles-6-pack-synthetic-blend-low-smoke","title":"Husqvarna HP 2-Stroke Premix Oil 6.4 oz Bottles (6-Pack) — Synthetic-Blend, Low Smoke","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna HP 2-Stroke Oil 6.4 oz (6-pack) is a synthetic-blend premix oil designed to protect and clean small two-stroke engines when mixed at the recommended ratio.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis six-bottle set contains Husqvarna HP (XP+) 2-stroke oil in 6.4-ounce bottles — each pre-measured to mix with 2.5 gallons of gasoline. The formula is a synthetic blend engineered to reduce smoke, support smoother running, and minimize deposit formation in handheld and small engine equipment. It replaces the older low-smoke 6.4 oz part and fits routine maintenance needs for chainsaws, trimmers, blowers and other two-stroke tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I mix this Husqvarna oil with gasoline?\u003c\/h3\u003e\n\u003cp\u003eEach 6.4-ounce bottle is calibrated to blend into 2.5 gallons of unleaded gasoline at the factory-recommended ratio. Pour the oil into fresh fuel, then add gas and gently invert or stir the container to ensure a uniform mixture before filling the tool.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix ratio: one 6.4 oz bottle per 2.5 gallons of fuel\u003c\/li\u003e\n  \u003cli\u003eUse fresh, clean unleaded gasoline (ethanol content per equipment manual)\u003c\/li\u003e\n  \u003cli\u003eMix in a separate approved container, away from flames or sparks\u003c\/li\u003e\n  \u003cli\u003eGently agitate to ensure a consistent premix before fueling the engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect from the synthetic blend?\u003c\/h3\u003e\n\u003cp\u003eThe HP synthetic-blend aims to keep combustion cleaner and reduce visible smoke compared with conventional oils. It helps maintain smoother power delivery, reduces carbon deposits, and supports longer intervals between cleaning and servicing when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLower smoke output for cleaner exhaust appearance\u003c\/li\u003e\n  \u003cli\u003eCleaner combustion chamber and fewer deposits on spark plugs\u003c\/li\u003e\n  \u003cli\u003eSmoother idle and more consistent throttle response\u003c\/li\u003e\n  \u003cli\u003eFormulated to work across a range of handheld two-stroke engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines are compatible with this 2-stroke oil?\u003c\/h3\u003e\n\u003cp\u003eHusqvarna HP 2-stroke oil is suitable for most air-cooled two-stroke small-engine equipment when the manufacturer recommends a synthetic or synthetic-blend oil. Always confirm compatibility and recommended mix ratios in the engine’s owner manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly used in chainsaws, string trimmers, handheld blowers and brushcutters\u003c\/li\u003e\n  \u003cli\u003eDesigned for air-cooled two-stroke engines that require premix oil\u003c\/li\u003e\n  \u003cli\u003eReplaces Husqvarna low-smoke 6.4 oz part number for direct convenience\u003c\/li\u003e\n  \u003cli\u003eNot intended for marine or water-cooled two-stroke outboard engines unless specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle the bottles safely?\u003c\/h3\u003e\n\u003cp\u003eStore unopened bottles in a cool, dry place away from direct sunlight and heat sources. Keep containers sealed and away from children and pets; dispose of leftover premix or empty bottles according to local hazardous-waste guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore at moderate temperature, out of direct sun\u003c\/li\u003e\n  \u003cli\u003eKeep caps tightly closed to prevent contamination or evaporation\u003c\/li\u003e\n  \u003cli\u003eUse recommended safety gear when handling fuel and oil mixtures\u003c\/li\u003e\n  \u003cli\u003eRecycle or dispose of empty bottles per local regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This six-pack is a practical choice for homeowners, landscapers and professional operators who use multiple handheld two-stroke tools or want ready-made single-dose bottles for accurate mixing. It’s ideal for anyone seeking a lower-smoke synthetic-blend oil that simplifies fuel preparation and helps keep small engines running cleanly when used according to the equipment manufacturer’s instructions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one 6.4 oz bottle mix with 1 gallon of fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Each 6.4 oz bottle is intended for 2.5 gallons of gasoline; do not dilute the ratio unless following manufacturer guidance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil low-smoke and synthetic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is a synthetic-blend formula designed to reduce smoke versus conventional oils, replacing the older low-smoke 6.4 oz part.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54199921377464,"sku":"B07BR885JH","price":72.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-hp-2-stroke-oil-front-packaging.jpg?v=1790603111"},{"product_id":"echo-6450002-power-blend-2-gallon-premix-pk6-50-1-ready-to-use-oil-for-2-cycle-engines","title":"ECHO 6450002 Power Blend 2-Gallon Premix (PK6) 50:1 Ready-to-Use Oil for 2-Cycle Engines","description":"\u003cstrong\u003eEcho 6450002 PK6 is a ready-to-use two-gallon power blend oil mix formulated at a 50:1 ratio, supplied as a six-pack for consistent, reliable fuel-oil blending for 2-cycle ECHO equipment.\u003c\/strong\u003e\n\n\u003cp\u003eThis product delivers factory-matched lubrication in a convenient, pre-measured 2-gallon container so you don’t need to calculate mixing ratios. Packed as a six-pack (PK6), the Echo 6450002 power blend is intended for users who run multiple small engines or want spare premix on hand. It’s designed for 50:1 fuel-to-oil engines common in professional and homeowner brushcutters, trimmers, blowers, and chainsaws.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 50:1 power blend save time and reduce mixing errors?\u003c\/h3\u003e\n\u003cp\u003eThe blend arrives pre-mixed at the correct 50:1 fuel-to-oil ratio, eliminating on-site measuring and the risk of incorrect proportions. That lowers the chance of engine damage from over- or under-oiling and cuts down prep time before jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-mixed 50:1 ratio — no measuring required\u003c\/li\u003e\n  \u003cli\u003eTwo-gallon containers reduce frequent refill interruptions\u003c\/li\u003e\n  \u003cli\u003eSix-pack supply supports multiple machines or longer projects\u003c\/li\u003e\n  \u003cli\u003eConsistent oiling protects piston and ring components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines and users is this premix compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis oil mix is made for 2-stroke engines specified to run on a 50:1 fuel\/oil ratio. It suits professional landscapers, equipment rental shops, and homeowners with several small engines who need reliable, portable premix.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with ECHO and other 50:1 2-cycle handheld equipment\u003c\/li\u003e\n  \u003cli\u003eIdeal for trimmers, blowers, chainsaws, and brushcutters\u003c\/li\u003e\n  \u003cli\u003eHandy for crews, rental fleets, and seasonal maintenance storage\u003c\/li\u003e\n  \u003cli\u003eConvenient for sites without mixing stations or measuring tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the storage and handling considerations for these two-gallon containers?\u003c\/h3\u003e\n\u003cp\u003eKeep containers sealed and stored upright in a cool, dry place away from direct heat or open flame. Use within the manufacturer’s recommended shelf life, and follow local regulations for fuel-containing products when transporting or disposing of empty containers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore upright, away from sunlight and ignition sources\u003c\/li\u003e\n  \u003cli\u003eTransport in ventilated areas and secure to prevent spills\u003c\/li\u003e\n  \u003cli\u003eObserve local disposal rules for oil\/fuel containers\u003c\/li\u003e\n  \u003cli\u003eLabeling and sealed caps help reduce contamination risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does buying a six-pack impact cost and convenience?\u003c\/h3\u003e\n\u003cp\u003ePurchasing PK6 lowers the frequency of reorders and provides bulk convenience for busy operations. While upfront cost is higher than a single jug, it reduces per-gallon handling time and the administrative overhead of repeated purchases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBulk supply reduces downtime from running out mid-job\u003c\/li\u003e\n  \u003cli\u003eFewer transactions and less packaging overall\u003c\/li\u003e\n  \u003cli\u003eConsistent fuel quality across multiple refills\u003c\/li\u003e\n  \u003cli\u003eStocking spare jugs simplifies fleet maintenance planning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Echo 6450002 PK6 2 Gallon Power Blend Oil Mix (50:1) is aimed at users who operate one or more 2-stroke, 50:1-specified engines and value convenience, consistency, and reduced prep time. It’s a practical choice for landscaping crews, equipment rental services, property managers, and homeowners with extensive yard work. Choose this six-pack when you want factory-mixed premix that minimizes measuring errors, supports continuous work, and keeps small-engine lubrication reliable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this premix safe for all ECHO 2-stroke tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for models requiring a 50:1 fuel-to-oil ratio; always check your tool’s manual before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long can I store the premix?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Store sealed in a cool, dry place; use within manufacturer-recommended shelf life to preserve performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54199978852536,"sku":"B00EHKSK6K","price":66.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-6450002-front-label.jpg?v=1790604447"},{"product_id":"turbotunity-carburetor-for-honda-gx390-gx340-16100-zf6-v01-replacement-kit-27mm-with-gaskets-spark-plug","title":"TURBOTUNITY Carburetor for Honda GX390 GX340 16100-ZF6-V01 Replacement Kit — 27mm with Gaskets \u0026 Spark Plug","description":"\u003cp\u003e\u003cstrong\u003eThe TURBOTUNITY carburetor 16100-ZF6-V01 is a direct-fit replacement carburetor kit engineered to restore fuel delivery for Honda GX390 and GX340 (11–13 HP) engines and compatible clones.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or clogged carburetor leaves your small engine running rough, hard to start, or unable to deliver full power, a precise replacement can get equipment back to work fast. This TURBOTUNITY kit includes the carburetor plus essential gaskets and a few common consumables so you can swap the unit without sourcing additional parts. It is designed to replace OEM part numbers 16100-ZF6-V01, 16100-ZH9-W21, and 16100-ZE2-W71 and fits a wide range of 337–390 cc, 11–13 HP GX340\/GX390 style engines used on mowers, pumps, pressure washers, log splitters and air compressors.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my GX390 or GX340 engine?\u003c\/h3\u003e\n\u003cp\u003eYes—this product is sized and configured to match the mounting, intake and fuel connections on standard GX340\/GX390 small engines and many clone variants. Confirm compatibility by checking the OEM part number or measuring mounting centers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 16100-ZF6-V01, 16100-ZH9-W21, 16100-ZE2-W71\u003c\/li\u003e\n  \u003cli\u003eFits 337, 338, 339, 340, 389, 390 cc (11–13 HP) engines\u003c\/li\u003e\n  \u003cli\u003e52 mm center-to-center mounting hole; 30.5 mm air intake\u003c\/li\u003e\n  \u003cli\u003eNot compatible with generators—do not install on generator heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the TURBOTUNITY carburetor kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with the replacement carburetor and a selection of gaskets and parts intended to simplify installation. These extras address common sealing points and include an air filter and spark plug so you can finish the basic service in one session.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTURBOTUNITY carburetor (27 mm carburetor with built-in fuel faucet)\u003c\/li\u003e\n  \u003cli\u003eThree carburetor mounting gaskets, cylinder head cover gasket, muffler gasket\u003c\/li\u003e\n  \u003cli\u003eInsulator, air filter and a spark plug included for convenience\u003c\/li\u003e\n  \u003cli\u003eHardware and dimensions compatible with typical GX340\/GX390 installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this carburetor affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged or clogged carburetor restores proper fuel and air metering, which helps the engine start more reliably and run smoothly under load. Results depend on correct installation and a clean fuel system—inspect fuel lines and the tank for debris before fitting the new unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves throttle response and idle stability when fitted correctly\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate hard-starting and stalling caused by worn carburetors\u003c\/li\u003e\n  \u003cli\u003eWorks best with fresh fuel and clean fuel filters\u003c\/li\u003e\n  \u003cli\u003eMay require minor adjustment of idle and mixture screws after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there special installation notes or limitations?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for users familiar with small-engine maintenance, but some setups require basic adjustments. This carburetor is not designed for generator applications and should not be used in vehicles or equipment with incompatible intake dimensions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck mounting hole spacing (52 mm) and air intake size (30.5 mm) before purchase\u003c\/li\u003e\n  \u003cli\u003eNot compatible with generator-specific carburetor assemblies\u003c\/li\u003e\n  \u003cli\u003eMay need throttle linkage or choke adjustment to match your equipment\u003c\/li\u003e\n  \u003cli\u003eReplace old fuel lines or filter if visibly degraded to prevent future clogging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TURBOTUNITY 16100-ZF6-V01 carburetor kit is intended for DIY mechanics, landscapers, and equipment owners who operate Honda GX340\/GX390 or clone engines on mowers, pressure washers, pumps, log splitters and air compressors. It’s designed for anyone seeking a full replacement assembly with the common gaskets and basic parts included to complete the swap and get powered equipment back into service quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit clone GX340\/GX390 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits many GX340\/GX390-style clones, but verify the 52 mm mounting spacing and 30.5 mm air intake before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor suitable for generators?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The manufacturer specifies this carburetor cannot be used on generator applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TURBOTUNITY","offers":[{"title":"Default Title","offer_id":54199979245752,"sku":"B0CTBNMNXD","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/turbotunity-carburetor-front-view_cf8f9dbc-c6cf-4a0b-b82a-d2583b3defc6.jpg?v=1790604471"},{"product_id":"powtol-ruixing-carburetor-for-honda-gx390-13hp-complete-replacement-kit-with-filters-spark-plug","title":"Powtol Ruixing Carburetor for Honda GX390 13HP — Complete Replacement Kit with Filters \u0026 Spark Plug","description":"\u003cp\u003e\u003cstrong\u003ePowtol Ruixing GX390 13HP carburetor is a complete replacement kit engineered to restore fuel delivery and reliable starting for Honda GX390 13HP engines used in pressure washers and utility loaders.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Honda GX390–powered pressure washer, Dingo compact loader, or compatible engine shows hard starting, rough idling, or reduced power, this Powtol Ruixing carburetor kit gives you the main service parts needed to return the engine to proper operation. The unit is an OEM-fit style replacement designed to match the mounting, throttle, and fuel inlet dimensions of the original carburetor and arrives pre-calibrated so installation and first runs are straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this carburetor fit my Honda GX390 engine?\u003c\/h3\u003e\n\u003cp\u003eThe Ruixing carburetor is built to fit Honda GX390 13HP engines and compatible models without modification. It matches key mounting and bore measurements to line up with intake and throttle linkages for a direct swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hole spacing (center-to-center): 51 mm\u003c\/li\u003e\n  \u003cli\u003eThrottle bore diameter: 27 mm\u003c\/li\u003e\n  \u003cli\u003eChoke bore diameter: 30.5 mm\u003c\/li\u003e\n  \u003cli\u003eVenturi diameter: 21 mm; fuel inlet line: 5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and why does it save time?\u003c\/h3\u003e\n\u003cp\u003eThis is sold as an all-in-one service kit so you don’t need to source small parts separately. It contains the carburetor plus common wear items that are often replaced together during a rebuild, reducing downtime and trips to parts suppliers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowtol Ruixing carburetor (fits Honda 16100-ZF6-V01 and related numbers)\u003c\/li\u003e\n  \u003cli\u003eAir filter and two fuel filters including a tank-join filter\u003c\/li\u003e\n  \u003cli\u003eSpark plug and three gaskets to ensure clean sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this unit run well out of the box and handle real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eEach carburetor is wet-flow tested to simulate engine operation and is calibrated for straightforward use out of the box. Materials were chosen to resist typical workshop stresses so the assembly maintains adjustment and performance during seasonal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass and zinc-plated float bowl components for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-density plastic float and anodized aluminum body for durability\u003c\/li\u003e\n  \u003cli\u003eFactory wet-flow testing to verify fuel delivery and response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Powtol Ruixing replacement carburetor kit suits DIY mechanics, service shops, and owners of pressure washers or compact loaders that use the Honda GX390 13HP platform. It’s designed for anyone needing a direct-fit replacement with the parts required for a standard carburetor service, especially when restoring starting reliability and steady idle on cold starts or after prolonged storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor replace Honda part 16100-ZF6-V01?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Powtol Ruixing GX390 carburetor is designed to replace Honda part numbers including 16100-ZF6-V01 and related variants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit ready to install out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It arrives pre-calibrated with filters, gaskets, and a spark plug so you can install and run after basic adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Powtol","offers":[{"title":"Default Title","offer_id":54200427184312,"sku":"B07KC7LVKJ","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/powtol-ruixing-gx390-front-view.jpg?v=1790613355"},{"product_id":"briggs-stratton-5w-30-synthetic-oil-pack-of-2-2-1-qt-oem-small-engine-lubrication-cold-start-protection","title":"Briggs \u0026 Stratton 5W-30 Synthetic Oil Pack of 2 (2×1 qt), OEM small-engine lubrication, cold-start protection","description":"\u003cp\u003e\u003cstrong\u003eBriggs \u0026amp; Stratton 100074 is a genuine OEM 5W-30 fully synthetic engine oil sold as a pack of two 1-quart bottles, engineered for reliable lubrication of compatible small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis twin pack of 1-quart bottles provides factory-specified 5W-30 synthetic oil from Briggs \u0026amp; Stratton, designed to meet the lubrication needs of many lawn mowers, garden tractors, and other small-engine equipment listed as compatible. The product is sold new and bulk packed as part number 100074-2PK. Always verify your engine’s recommended oil viscosity and part numbers in the owner’s manual before use.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines use Briggs \u0026amp; Stratton 100074 5W-30 synthetic oil?\u003c\/h3\u003e\n\u003cp\u003eThis oil is intended for small gasoline engines that specify 5W-30 synthetic oil and list part 100074 or compatible OEM replacements. It suits many modern Briggs \u0026amp; Stratton overhead-valve engines and similar platforms from other manufacturers when 5W-30 is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits engines that call for 5W-30 viscosity in the owner’s manual.\u003c\/li\u003e\n  \u003cli\u003eMatches Briggs \u0026amp; Stratton OEM parts list entries when 100074 or equivalent is specified.\u003c\/li\u003e\n  \u003cli\u003eAppropriate for lawn tractors, walk-behind mowers, and comparable small engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this 2-quart pack during routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eEach bottle contains one quart, so the two-pack lets you complete one full oil change on engines that require up to two quarts, or perform two single-quart top-ups. Use on level ground, warm the engine briefly, drain old oil, replace the filter if required, and refill to the specified level shown in your manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the engine a few minutes to help oil drain fully.\u003c\/li\u003e\n  \u003cli\u003eDrain old oil, then dispose of it responsibly at a recycling center.\u003c\/li\u003e\n  \u003cli\u003eRefill to the dipstick or sight gauge level specified in the manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of choosing this OEM synthetic oil?\u003c\/h3\u003e\n\u003cp\u003eOpting for a genuine Briggs \u0026amp; Stratton oil ensures compatibility with factory tolerances and warranties when the manual specifies OEM fluids. Synthetic 5W-30 offers consistent flow at low temperatures and stable protection under heat, helping reduce wear and maintain engine cleanliness within typical service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-specified formulation for recommended engines.\u003c\/li\u003e\n  \u003cli\u003eSynthetic base promotes cold-start flow and thermal stability.\u003c\/li\u003e\n  \u003cli\u003eSold as a two-bottle package for convenient maintenance planning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product the exact part my engine needs?\u003c\/h3\u003e\n\u003cp\u003ePart number 100074-2PK identifies the two-quart pack of Briggs \u0026amp; Stratton 5W-30 synthetic oil; however, confirm your engine’s part number and viscosity requirement in the owner’s manual to ensure a match. Using the wrong oil grade or non-approved fluids can affect performance and service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your equipment’s manual for the recommended viscosity and OEM part numbers.\u003c\/li\u003e\n  \u003cli\u003eContact Briggs \u0026amp; Stratton support or an authorized dealer for compatibility questions.\u003c\/li\u003e\n  \u003cli\u003eKeep packaging and part numbers for warranty or service references.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: DIY homeowners, landscapers, and small-engine technicians who prefer OEM fluids for routine maintenance will find this two-quart pack convenient. It’s suited to anyone maintaining Briggs \u0026amp; Stratton or compatible small engines that specify 5W-30 synthetic oil and who want factory-formulated lubrication in readily stored individual one-quart bottles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much oil is included in the 100074-2PK?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pack contains two 1-quart bottles, totaling 2 quarts of 5W-30 synthetic oil.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in any small engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only use it where the owner’s manual calls for 5W-30 synthetic oil or lists part 100074 as compatible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Briggs \u0026 Stratton","offers":[{"title":"Default Title","offer_id":54200629788856,"sku":"B079SM6LQH","price":102.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/briggs-stratton-front-packaging_f7ffb18e-9d4a-44ad-919b-54ebea7fba56.jpg?v=1790616635"},{"product_id":"echo-red-armor-2-6-oz-50-1-12-pack-premix-2-stroke-oil-genuine-oem-6550001s-detergent-stabilized","title":"ECHO Red Armor 2.6 oz 50:1 12-Pack Premix 2-Stroke Oil — Genuine OEM 6550001S, Detergent Stabilized","description":"\u003cp\u003e\u003cstrong\u003eECHO Red Armor 2.6 oz 2-stroke oil bottles deliver a genuine OEM 50:1 premix solution for one-gallon fuel batches, supplied here in a convenient 12-pack for consistent engine protection and easier mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 12 compact ECHO 6550001S bottles are made for operators who mix small fuel batches for handheld two-stroke equipment. Each 2.6-ounce bottle is pre-measured for a 50:1 gasoline-to-oil ratio, so you avoid measuring errors and reduce spills. The formula includes detergents and stabilizers designed to help keep combustion chambers cleaner and to maintain mixed fuel quality when stored correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil simplify fuel mixing?\u003c\/h3\u003e\n\u003cp\u003eEvery bottle contains the exact amount of oil needed to treat one gallon of gasoline at a 50:1 ratio, eliminating guesswork and measuring tools. That makes it quick to prepare fuel on the jobsite or in the shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-measured 2.6 oz bottle equals one gallon at 50:1.\u003c\/li\u003e\n  \u003cli\u003eScrew-top bottle for spill-minimizing pouring.\u003c\/li\u003e\n  \u003cli\u003eCompact size fits in toolboxes or storage racks.\u003c\/li\u003e\n  \u003cli\u003eTwelve bottles per pack for multiple refills or season stock-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil help keep my engine clean?\u003c\/h3\u003e\n\u003cp\u003eThe Red Armor formula includes detergents designed to reduce carbon deposits and caked-on residue, supporting more consistent combustion. Cleaner internals can help preserve performance over time when used as part of regular maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDetergent additives target carbon build-up.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce piston scuffing and ring sticking risk.\u003c\/li\u003e\n  \u003cli\u003eSuitable for routine use with compatible two-stroke engines.\u003c\/li\u003e\n  \u003cli\u003eWorks from first use to address existing deposits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I store premixed fuel made with this oil?\u003c\/h3\u003e\n\u003cp\u003eThe formula includes fuel-stabilizing components so mixed fuel can remain usable for extended storage when kept sealed and away from heat or sunlight. Properly stored, mixed fuel can retain acceptable condition up to about two years, making it practical for seasonal storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes stabilizers to reduce fuel degradation.\u003c\/li\u003e\n  \u003cli\u003eStore in a sealed, approved container away from direct heat.\u003c\/li\u003e\n  \u003cli\u003eCheck local recommendations for long-term fuel storage safety.\u003c\/li\u003e\n  \u003cli\u003eRotate stock to maintain freshest fuel for equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product compatible with my equipment?\u003c\/h3\u003e\n\u003cp\u003eThese 2.6 oz Red Armor bottles are intended for two-stroke engines that specify a 50:1 gasoline-to-oil premix. As a genuine ECHO OEM item, they are formulated to meet the needs of many handheld and small-engine applications, but always check your owner’s manual for the recommended ratio and oil specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine ECHO replacement part number 6550001S.\u003c\/li\u003e\n  \u003cli\u003eFormulated for engines calling for 50:1 premix oil.\u003c\/li\u003e\n  \u003cli\u003eIdeal for handheld trimmers, blowers, chainsaws and small equipment.\u003c\/li\u003e\n  \u003cli\u003eNot a direct substitute if your manual requires a different ratio or oil type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 12-pack of ECHO Red Armor 2.6 oz bottles is aimed at landscapers, rental shops, property managers and homeowners who use multiple pieces of two-stroke equipment and want convenient, accurate premix dosing. It’s also useful for anyone who needs to keep a ready supply of correctly proportioned oil for field refills, seasonal maintenance, or bulk storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much fuel does one 2.6 oz bottle treat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each 2.6 oz bottle is pre-measured to treat one gallon of gasoline at a 50:1 ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can mixed fuel with this oil be stored long-term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: When sealed and stored away from heat, mixed fuel made with this oil can remain usable for up to about two years.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54203900756152,"sku":"B07MRZ2DFH","price":100.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-red-armor-front-packaging.jpg?v=1790621263"},{"product_id":"vp-racing-2-cycle-premixed-fuel-50-1-quart-3-pack-94-octane-ethanol-free-for-small-engines","title":"VP Racing 2-Cycle Premixed Fuel 50:1 Quart 3-Pack — 94-Octane Ethanol-Free for Small Engines","description":"\u003cp\u003e\u003cstrong\u003eVP Racing Fuels 6235 SEF 50:1 is a ready-to-pour, premixed 2-cycle gasoline blend (50:1) formulated for small engines and sold in convenient quart containers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premixed 2-cycle fuel removes the need to measure and mix oil and gasoline yourself, delivering a 94-octane, ethanol-free solution designed for lawn mowers, trimmers, chainsaws, blowers, and other portable gas-powered equipment. The formula meets or exceeds JASO FD, ISO-L-EGD, and API TC standards, and is engineered for reliable starts, consistent performance, and reduced risk of ethanol-related damage to fuel systems. Because it’s stabilized for long-term storage, you can keep sealed cans for years and trust the fuel will remain ready when seasonal projects arise.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this premixed fuel save time and reduce hassle?\u003c\/h3\u003e\n\u003cp\u003eBy arriving at the proper 50:1 gasoline-to-oil ratio, VP Racing Fuels 6235 SEF eliminates measuring and hand-mixing, which cuts prep time and reduces the chance of mixing errors that can harm 2-stroke engines. It’s ideal when you need quick refueling on busy workdays or during weekend maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo measuring cups, funnels, or calculations required — pour and run.\u003c\/li\u003e\n  \u003cli\u003eConsistent lubrication and combustion because factory mixing avoids under- or over-oiling.\u003c\/li\u003e\n  \u003cli\u003ePackaged in quarts for manageable handling and less spillage during fueling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose an ethanol-free 94-octane premix over pump gas?\u003c\/h3\u003e\n\u003cp\u003eEthanol-free fuel prevents the phase separation, corrosion, and carburetor gumming associated with ethanol blends, issues that fuel stabilizers can’t always fix. The higher 94-octane rating supports cleaner, more reliable ignition in high-revving 2-stroke engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo ethanol avoids water absorption and fuel system corrosion risks.\u003c\/li\u003e\n  \u003cli\u003eHigher octane aids in reducing misfires and improves throttle response.\u003c\/li\u003e\n  \u003cli\u003eFormulated to protect seals, gaskets, and carburetor components typically damaged by ethanol.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will this fuel stay good in storage?\u003c\/h3\u003e\n\u003cp\u003eVP Racing Fuels 6235 SEF is stabilized for extended shelf life: up to two years in a filled engine tank and up to five years when sealed in its original container. Proper storage—cool, dark, and tightly sealed—helps preserve fuel integrity and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStable in-tank for up to 2 years under normal storage conditions.\u003c\/li\u003e\n  \u003cli\u003eSealed quarts maintain quality up to 5 years, ideal for seasonal use.\u003c\/li\u003e\n  \u003cli\u003eReduces need for frequent fuel replacement or additives when stored correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment and users is this premixed fuel compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis 50:1 premix is intended for 2-stroke small engines that specify or accept a 50:1 gasoline-to-oil ratio. It suits both consumer and professional users who want consistent performance without mixing on-site.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for chainsaws, string trimmers, leaf blowers, small outboards, and other 2-cycle tools requiring 50:1.\u003c\/li\u003e\n  \u003cli\u003eGood for homeowners, landscapers, arborists, and rental fleets needing reliable, ready-to-use fuel.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for 4-stroke engines or 2-stroke engines that require different ratios (check your owner’s manual).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VP Racing Fuels 6235 SEF 50:1 Premixed 2-Cycle fuel is designed for anyone who values convenience and engine protection—homeowners doing seasonal yard work, professional landscapers and arborists needing fast refueling, and equipment rental operators who want consistent, ethanol-free fuel across multiple machines. Always verify your engine’s required oil-to-gas ratio before use and follow manufacturer guidelines for storage and handling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this fuel in any 2-cycle engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use in 2-stroke engines that require a 50:1 gasoline-to-oil ratio; check your owner’s manual before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will an unopened quart stay good?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sealed in the original container, it remains stable for up to five years under proper storage conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VP Racing","offers":[{"title":"Default Title","offer_id":54204063056056,"sku":"B07V1Z56MC","price":96.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/vp-racing-quart-front-label.jpg?v=1790622736"},{"product_id":"vp-racing-multi-mix-premixed-2-cycle-fuel-3-pack-3-32oz-ethanol-free-40-1-50-1-ready-to-use-for-trimmers-and-chainsaws","title":"VP Racing Multi-Mix Premixed 2-Cycle Fuel 3-Pack — 3×32oz Ethanol-Free, 40:1 \u0026 50:1 Ready-to-Use for Trimmers and Chainsaws","description":"\u003cp\u003e\u003cstrong\u003eVP Racing Fuels Multi-Mix is a ready-to-use, ethanol-free premixed 2-cycle fuel that meets both 40:1 and 50:1 engine ratios for small outdoor power tools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you run trimmers, chainsaws, blowers or other air-cooled two-stroke equipment, VP Multi-Mix removes the guesswork of measuring oil and gas. Formulated with 94 octane and high-quality base stocks, this premix delivers reliable cold starts, consistent combustion, and a long shelf life. Sold as three 32 fl oz quarts, it’s convenient for storage and meets many manufacturers’ warranty fuel requirements.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this premixed fuel simplify weekend yard work?\u003c\/h3\u003e\n\u003cp\u003eUsing VP Multi-Mix saves time and reduces spills because the fuel arrives at the correct oil-to-gas ratio for compatible 2-cycle engines. Instead of mixing oil and gasoline manually, you pour and run, which is especially useful when you’re rotating through multiple tools or want to quickly return to the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo measuring — pre-blended to 40:1 and 50:1 ratios.\u003c\/li\u003e\n  \u003cli\u003eThree quart cans give multiple refills for common handheld tools.\u003c\/li\u003e\n  \u003cli\u003eReduces mess and operator error when topping off tanks in the yard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fuel protect my engine and fuel system?\u003c\/h3\u003e\n\u003cp\u003eVP Multi-Mix is ethanol-free, which helps prevent corrosion, phase separation, and carburetor issues linked to ethanol-blended fuels. Its formulation supports cleaner combustion compared with untreated gasoline, which can help reduce deposits and preserve small engine components when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEthanol-free formula lowers risk of fuel-system damage.\u003c\/li\u003e\n  \u003cli\u003e94 octane and quality base stocks for stable combustion.\u003c\/li\u003e\n  \u003cli\u003eMeets warranty requirements for many air-cooled two-stroke engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I store VP Multi-Mix unopened or in my tool’s tank?\u003c\/h3\u003e\n\u003cp\u003eThis premixed fuel offers extended shelf life: up to five years in a sealed container and up to two years once stored in an equipment tank. Proper storage—cool, dry, and out of direct sunlight—helps preserve performance and minimizes fuel degradation over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive-year shelf life when unopened.\u003c\/li\u003e\n  \u003cli\u003eStable in the tank for up to two years under proper conditions.\u003c\/li\u003e\n  \u003cli\u003eReduces need for added stabilizers when stored correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan one product serve equipment that requires different mix ratios?\u003c\/h3\u003e\n\u003cp\u003eYes — VP Multi-Mix is formulated to be compatible with engines that specify either 40:1 or 50:1 oil-to-gas ratios. This versatility makes it a practical choice for users who own several types of two-cycle tools, removing the need to keep separate mixed fuels on hand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with both 40:1 and 50:1 specified engines.\u003c\/li\u003e\n  \u003cli\u003eUseful for households or professionals with mixed equipment fleets.\u003c\/li\u003e\n  \u003cli\u003eSold in three convenient quart containers for easy transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VP Racing Fuels 6815 SEF Multi-Mix is ideal for homeowners, landscapers, and contractors who rely on handheld two-stroke equipment and want a clean, consistent, ethanol-free premix. It’s suited to anyone seeking to eliminate mixing errors, protect fuel systems, and keep multiple small engines ready to run with minimal fuss.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VP Multi-Mix safe for engines requiring 50:1?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. VP Multi-Mix is formulated to be compatible with engines that call for either 40:1 or 50:1 ratios.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will a sealed can stay good?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Unopened VP Multi-Mix remains stable up to five years when stored cool and dry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VP Racing","offers":[{"title":"Default Title","offer_id":54204119744696,"sku":"B096H4ZG5X","price":91.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/vp-racing-multimix-front-packaging.jpg?v=1790624075"},{"product_id":"husqvarna-2-stroke-oil-xp-2-6-oz-bottles-12-pack-jaso-fd-semi-synthetic-low-smoke","title":"Husqvarna 2-Stroke Oil XP+ 2.6 oz Bottles 12-Pack, JASO-FD Semi-Synthetic Low-Smoke","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna XP+ 2-Stroke Oil is a JASO-FD semi-synthetic engine oil in 2.6 oz bottles (12-pack) formulated to lower operating temperatures, reduce piston and crankcase deposits, and include fuel stabilization for professional two-stroke engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you run chainsaws, blowers, trimmers, or other handheld two-stroke equipment, choosing the right premix oil affects performance and longevity. Husqvarna XP+ combines a semi-synthetic base with advanced additives to deliver consistent lubrication, cleaner combustion, and lower exhaust smoke while meeting JASO-FD standards. This 12-pack of 2.6 oz bottles is sized for accurate mixing and convenient field refills.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Husqvarna XP+ help engine performance?\u003c\/h3\u003e\n\u003cp\u003eThis oil is engineered to provide balanced lubricity and detergency so moving parts stay protected under heavy use. Lower operating temperatures reduce stress on bearings and seals, while the formulation minimizes piston and crankcase buildup, helping maintain power output over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-synthetic base oils for stable film strength.\u003c\/li\u003e\n  \u003cli\u003ePremium additives that reduce wear on rings and bearings.\u003c\/li\u003e\n  \u003cli\u003eLow-smoke chemistry for cleaner exhaust and fewer deposits.\u003c\/li\u003e\n  \u003cli\u003eJASO-FD certification for high detergency and lubrication standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy come in 2.6 oz bottles and a 12-pack?\u003c\/h3\u003e\n\u003cp\u003eSmall, single-use bottles make measuring and mixing fuel precise and mess-free, ideal for fieldwork or sharing among operators. The 12-pack offers economical stocking for crews or frequent users without needing large containers that can degrade if stored improperly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccurate portioning to achieve correct premix ratios.\u003c\/li\u003e\n  \u003cli\u003eReduced contamination risk compared to bulk dispensing.\u003c\/li\u003e\n  \u003cli\u003eConvenient for jobsite kits, backpacks, or vehicle storage.\u003c\/li\u003e\n  \u003cli\u003eEasy to carry multiple bottles for extended work sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this oil compatible with my two-stroke equipment?\u003c\/h3\u003e\n\u003cp\u003eHusqvarna XP+ is tested and approved for use in Husqvarna two-stroke engines and is suitable for most other modern two-stroke air- and fan-cooled engines that accept semi-synthetic oils. It meets JASO-FD requirements, which indicates compatibility with engines needing a high level of detergency and low deposits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproved for Husqvarna two-stroke powerheads and handheld tools.\u003c\/li\u003e\n  \u003cli\u003eSuitable for engines specifying JASO-FD or equivalent standards.\u003c\/li\u003e\n  \u003cli\u003eNot for four-stroke or automotive engines—use only as two-stroke premix.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer-specified fuel-to-oil ratios when mixing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice day to day?\u003c\/h3\u003e\n\u003cp\u003eExpect easier starting, steadier throttle response, and fewer smoke-related fouling issues during normal operation. Over time, the lower deposit formation helps maintain compression and reduces maintenance frequency for piston and ring servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCleaner spark plugs and exhaust ports from low-smoke burn.\u003c\/li\u003e\n  \u003cli\u003eReduced overheating under continuous heavy loads.\u003c\/li\u003e\n  \u003cli\u003eLonger intervals between top-end services in many cases.\u003c\/li\u003e\n  \u003cli\u003eIntegrated fuel stabilizer helps short-term fuel storage stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Husqvarna XP+ 2-Stroke Oil 2.6 oz bottles (12-pack) is aimed at professional landscapers, arborists, maintenance crews, and serious homeowners who rely on two-stroke handheld equipment and want a high-quality, convenient premix solution. If you need accurate dosing, reduced engine deposits, and a product tested to meet stringent JASO-FD standards, this kit is a practical choice for on-the-job mixing and storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in non-Husqvarna two-stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. XP+ is suitable for most modern air-cooled two-stroke engines that accept semi-synthetic oils and JASO-FD formulations. Check your engine manual for specific oil recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fuel-to-oil ratio should I mix with this 2.6 oz bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your engine manufacturer's specified ratio. The 2.6 oz bottle is sized to make common premix ratios easy, but always measure to match the recommended fuel-to-oil ratio.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54204137144504,"sku":"B077CQFGQV","price":84.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-xp-2-stroke-2-6oz-front-packaging.jpg?v=1790624649"},{"product_id":"vp-racing-premixed-2-cycle-fuel-quart-50-1-3-pack-ethanol-free-94-octane-long-storage","title":"VP Racing Premixed 2-Cycle Fuel Quart 50:1, 3-Pack — Ethanol-Free 94 Octane, Long Storage","description":"\u003cp\u003e\u003cstrong\u003eVP Racing Fuels 6235 SEF 50:1 is a ready-to-use, no-ethanol premixed 2-cycle fuel formulated at a 50:1 ratio to power small engines reliably without mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for handheld and portable gasoline equipment, this VP Racing premix comes in quart containers (3-pack) and combines high-octane unleaded gasoline with precisely measured synthetic lubricant. It removes the need to measure oil or worry about ethanol-related damage, while meeting industry performance standards for two-stroke engines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this premixed fuel save time and reduce hassle?\u003c\/h3\u003e\n\u003cp\u003eBecause the 50:1 oil-to-gas ratio is pre-blended at the factory, you just pour and run — no mixing, measuring, or mess. This is especially helpful when moving between jobs or managing multiple pieces of equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo on-site mixing: pour directly from quart container into the fuel tank.\u003c\/li\u003e\n  \u003cli\u003eConsistent lubrication: factory-mixed ratio prevents under- or over-oiling.\u003c\/li\u003e\n  \u003cli\u003ePortability: small quarts fit easily in tool bags or trunks for quick refills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill VP Racing 6235 SEF protect my engine better than pump gas?\u003c\/h3\u003e\n\u003cp\u003eThis premix uses ethanol-free, 94 octane gasoline to avoid the corrosive and water-attracting effects common to many retail fuels. The combination of clean fuel and balanced two-stroke lubricant helps reduce deposits and fuel-system stress that ethanol can cause.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEthanol-free base fuel to prevent ethanol-related component swelling and phase separation.\u003c\/li\u003e\n  \u003cli\u003eHigh octane for stable combustion in small engines.\u003c\/li\u003e\n  \u003cli\u003eFormulation engineered for reduced carbon build-up compared to ethanol-blended pump gas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I store this premix without losing quality?\u003c\/h3\u003e\n\u003cp\u003eVP Racing premix is stabilized for extended storage: it remains usable in a tank for up to two years, and up to five years when sealed in its original can. That makes it practical for seasonal equipment or emergency reserves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIn-tank stability: up to 2 years under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eSealed-can stability: up to 5 years when unopened and stored properly.\u003c\/li\u003e\n  \u003cli\u003eBest practice: store in a cool, dry place away from direct sunlight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich performance and industry standards does this product meet?\u003c\/h3\u003e\n\u003cp\u003eVP Racing 6235 SEF meets recognized two-stroke specifications to ensure compatibility and performance across many handheld engines. These certifications indicate the premix is designed to deliver reliable lubrication and combustion characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets\/exceeds JASO FD for two-stroke lubrication quality.\u003c\/li\u003e\n  \u003cli\u003eMeets ISO-L-EGD two-stroke performance specifications.\u003c\/li\u003e\n  \u003cli\u003eComplies with API TC classification for two-cycle engine oils.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VP Racing Fuels 6235 SEF 50:1 premixed quart 3-pack is ideal for landscapers, gardeners, arborists, homeowners, and rental fleets who use trimmers, chainsaws, blowers, edgers, or other 2-cycle handheld equipment and want a convenient, ethanol-free fuel that reduces mixing errors and keeps machines running dependably.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this premix in any 2-cycle engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, VP Racing 6235 SEF 50:1 is formulated for most air-cooled two-stroke handheld engines; check your equipment manual for manufacturer-specific ratio requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does an opened quart remain usable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Once opened, use within the same season for best results; unopened cans remain stable up to five years.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VP Racing","offers":[{"title":"Default Title","offer_id":54204187476152,"sku":"B096GYB4JP","price":92.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/vp-racing-6235-front-packaging.jpg?v=1790625683"},{"product_id":"echo-2-stroke-engine-oil-red-armor-6-4oz-bottle-50-1-mix-treats-2-5-gal-detergent-protection","title":"ECHO 2-Stroke Engine Oil Red Armor 6.4oz Bottle — 50:1 Mix Treats 2.5 gal, Detergent Protection","description":"\u003cp\u003e\u003cstrong\u003eECHO Red Armor 2-Stroke Engine Oil 6.4 oz (part 6550025) is a concentrated lubricating and detergent formula designed to mix at 50:1 for 2.5 gallons of fuel, protecting and cleaning two-stroke engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you need dependable two-stroke protection, ECHO's Red Armor bottle delivers a factory-grade oil that both lubricates and helps dissolve carbon buildup. This single 6.4 oz bottle is measured to mix precisely into 2.5 gallons of gasoline at the recommended 50:1 ratio, giving you treated fuel that supports smoother operation and extended component life when used as directed.\u003c\/p\u003e\n\n\u003ch3\u003eHow does ECHO Red Armor help maintain engine performance?\u003c\/h3\u003e\n\u003cp\u003eRed Armor combines detergents with a high-performance lubricant package to loosen accumulated deposits and reduce friction inside the combustion chamber. That keeps pistons and rings moving freely and helps prevent power loss that comes from carbon and varnish buildup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains active detergents to remove caked-on deposits and carbon.\u003c\/li\u003e\n  \u003cli\u003eLubricants formulated to lower piston scuffing risk and ring sticking.\u003c\/li\u003e\n  \u003cli\u003eOptimized for two-stroke combustion environments to preserve power output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the correct mixing ratio and how much fuel will this bottle treat?\u003c\/h3\u003e\n\u003cp\u003eThis ECHO bottle is pre-measured for a 50:1 oil-to-gasoline ratio, which means the 6.4 oz container mixes into 2.5 gallons of gasoline to reach the proper concentration. Following the specified ratio ensures adequate lubrication without over-oiling the system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix ratio: 50 parts gasoline to 1 part Red Armor oil (50:1).\u003c\/li\u003e\n  \u003cli\u003eBottle volume: 6.4 fluid ounces — treats 2.5 gallons of fuel.\u003c\/li\u003e\n  \u003cli\u003eUse a clean, sealed container and measure accurately for consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does mixed fuel stay usable when treated with Red Armor?\u003c\/h3\u003e\n\u003cp\u003eRed Armor includes stabilizing ingredients that help maintain mixed fuel quality when stored properly. In a tightly sealed container, mixed fuel treated with this oil can remain stable for up to two years, reducing waste and preserving starting reliability for seasonal equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains fuel stabilizers to slow degradation of mixed gasoline.\u003c\/li\u003e\n  \u003cli\u003eStore in a clean, sealed container away from direct heat and sunlight.\u003c\/li\u003e\n  \u003cli\u003eCheck remaining fuel for smell and clarity before use if stored long term.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment is this oil compatible with and are there usage limits?\u003c\/h3\u003e\n\u003cp\u003eECHO Red Armor is formulated for two-stroke engines that require premixed fuel at a 50:1 ratio, including handheld outdoor power tools and small engines. Always consult your equipment owner's manual for the recommended oil-to-fuel ratio and any manufacturer-specific oil requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended for two-stroke handheld and small engines when 50:1 is specified.\u003c\/li\u003e\n  \u003cli\u003ePart number: 6550025S (single 6.4 oz bottle).\u003c\/li\u003e\n  \u003cli\u003eNot intended as a substitute where a different ratio or oil spec is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ECHO Red Armor 6.4 oz is aimed at homeowners, landscapers, and professionals who run two-stroke tools and want a single-bottle solution to treat 2.5 gallons of fuel. It's useful for those who need an oil that cleans deposits, provides targeted lubrication, and stabilizes mixed fuel for seasonal storage—so long as their engine specifies a 50:1 mix.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one 6.4 oz bottle mix exactly 2.5 gallons at 50:1?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 6.4 oz ECHO Red Armor bottle is measured to mix at a 50:1 ratio, treating 2.5 gallons of gasoline.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does treated fuel remain usable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: When stored in a proper sealed container, fuel mixed with Red Armor can remain stable for up to two years.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54204513222840,"sku":"B00EHTRUIU","price":88.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-red-armor-front-label_5b513ef4-9866-43be-a418-fde9c6eaf220.jpg?v=1790632195"},{"product_id":"husqvarna-xp-2-stroke-oil-6-pack-12-8-oz-bottles-synthetic-blend-professional-performance-for-heavy-duty-small-engines","title":"Husqvarna XP 2-Stroke Oil 6-Pack 12.8 oz Bottles — Synthetic-Blend, Professional Performance for Heavy-Duty Small Engines","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna XP 2-Stroke Oil is a synthetic-blend fuel additive supplied in 12.8 oz bottles (6-pack) formulated for heavy-duty use and mixed at the recommended ratio to treat up to 5 gallons of gasoline per bottle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from a performance-focused formulation, this XP Professional Performance 2-cycle oil is engineered for demanding jobs and frequent operation. The 12.8 oz bottles are sized to mix a single bottle with up to 5 gallons of gasoline, making it convenient for professionals and serious homeowners who need consistent lubrication and protection without measuring many small bottles. This 6-pack offers spare bottles for repeat jobs or for keeping a supply in fleet vehicles and tool sheds.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this 2-stroke oil support professional equipment?\u003c\/h3\u003e\n\u003cp\u003eThe XP Professional Performance blend is designed to provide reliable lubrication, reduce deposits, and help maintain smooth engine operation during prolonged or heavy workloads. It’s formulated to work in a wide range of small engines commonly used by contractors, landscapers, and power-equipment operators.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides consistent lubrication for frequent, high-load use\u003c\/li\u003e\n  \u003cli\u003eHelps limit carbon and varnish buildup in combustion chambers\u003c\/li\u003e\n  \u003cli\u003eCompatible with many modern 2-stroke handheld and mounted engines\u003c\/li\u003e\n  \u003cli\u003ePackaged in worksite-friendly 12.8 oz bottles for easy mixing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the correct mixing ratio and coverage per bottle?\u003c\/h3\u003e\n\u003cp\u003eEach 12.8 oz bottle of Husqvarna XP 2-Stroke Oil is intended to be mixed into up to 5 gallons of gasoline at the manufacturer-recommended ratio. This simplifies fuel prep by allowing one bottle to serve a full 5-gallon container, reducing the need for frequent measuring or multiple small bottles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 12.8 oz bottle mixes with up to 5 gallons of gasoline\u003c\/li\u003e\n  \u003cli\u003eSold as a 6-pack for bulk usage or multi-unit fleets\u003c\/li\u003e\n  \u003cli\u003ePrevents over- or under-oiling when following recommended ratio\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a synthetic blend instead of straight mineral oil?\u003c\/h3\u003e\n\u003cp\u003eSynthetic blends combine the benefits of synthetic base stocks with performance additives to offer better thermal stability and cleaner burning than many mineral oils. For regular or heavy usage, a synthetic-blend oil can deliver more consistent protection across temperature ranges and operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved thermal stability under hard use\u003c\/li\u003e\n  \u003cli\u003eFormulated to reduce residue and maintain power output\u003c\/li\u003e\n  \u003cli\u003eBalanced cost-to-performance for pro users and frequent operators\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle the 6-pack on the jobsite?\u003c\/h3\u003e\n\u003cp\u003eKeep bottles upright in a cool, dry place away from open flames and direct sunlight. Use one bottle per 5-gallon fuel container to avoid leftover mixed fuel; store unopened bottles sealed until needed to preserve shelf life and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore sealed bottles away from heat and sparks\u003c\/li\u003e\n  \u003cli\u003eLabel mixed fuel with date and ratio for safe rotation\u003c\/li\u003e\n  \u003cli\u003eTransport in a stable, upright box or rack to avoid leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Husqvarna XP 2-Stroke Oil 12.8 oz 6-pack is suited for professional landscapers, contractors, arborists, and serious homeowners who run multiple 2-stroke engines or need dependable, easy-to-mix oil for frequent field use. If you want a worksite-ready oil that balances cost and performance and simplifies fuel mixing for up to 5-gallon containers, this product is a practical choice.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: Sold on Amazon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much fuel does one 12.8 oz bottle mix with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 12.8 oz bottle is designed to mix with up to 5 gallons of gasoline at the recommended ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil suitable for professional use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The XP Professional Performance synthetic blend is formulated for heavy-duty, frequent operation in professional equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54204604022968,"sku":"B009SO12I8","price":106.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-xp-2-stroke-front-packaging.jpg?v=1790634157"},{"product_id":"lucas-oil-synthetic-blend-tc-w3-2-cycle-marine-oil-1-gallon-50-1-mix-nmma-certified","title":"Lucas Oil Synthetic Blend TC-W3 2-Cycle Marine Oil - 1 Gallon, 50:1 Mix, NMMA Certified","description":"\u003cp\u003e\u003cstrong\u003eLucas Oil 10861 is a NMMA TC-W3® certified synthetic-blend 2-cycle marine oil designed for water-cooled outboards and personal watercraft, formulated for 50:1 mixing and suitable for pre-mix or direct-injection systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to meet the demands of water-cooled two-stroke engines, Lucas Oil’s Synthetic Blend TC-W3 pairs base oils with a targeted additive package to help control deposits and improve combustion consistency in marine applications. This one-gallon formula carries NMMA TC-W3® certification (RL-13125P) and is engineered for both recreational boaters and professional watercraft users who want a reliable oil for routine service or seasonal preparation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil prevent spark plug fouling and pre-ignition?\u003c\/h3\u003e\n\u003cp\u003eThe oil uses an ashless detergent-inhibitor system and Lucas’s proprietary additives to reduce carbon deposits and help keep spark plugs cleaner longer. Cleaner plugs maintain stronger ignition and help engines run more predictably under varied loads and rpm ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAshless detergent package to limit deposit formation\u003c\/li\u003e\n  \u003cli\u003eInhibitors that reduce pre-ignition tendencies\u003c\/li\u003e\n  \u003cli\u003eBalanced additives to protect combustion chamber components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mixing ratio and engine setups is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eLucas recommends a 50:1 fuel-to-oil mixing ratio, which suits most modern two-stroke outboards and personal watercraft when manufacturers call for TC-W3 oils. The formulation is approved for use in both pre-mix systems and direct oil injection systems, giving flexibility across a wide range of models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended mix: 50 parts gasoline to 1 part oil\u003c\/li\u003e\n  \u003cli\u003eSuitable for pre-mix and direct-injection two-stroke systems\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for water-cooled outboards and PWCs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil protect rings, ports, and exhaust components?\u003c\/h3\u003e\n\u003cp\u003eThe synthetic-blend base and additive suite help reduce ring sticking and limit deposits on ports and exhaust areas. While regular maintenance and correct mix ratios are essential, the product is formulated to support long-term component cleanliness when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulation reduces ring sticking risk\u003c\/li\u003e\n  \u003cli\u003eAdditives help control port and exhaust deposits\u003c\/li\u003e\n  \u003cli\u003eSupports consistent performance across operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a NMMA TC-W3® certified oil for marine two-strokes?\u003c\/h3\u003e\n\u003cp\u003eNMMA TC-W3® certification means the oil meets established marine-specific tests for detergency, lubricity, and deposit control under water-cooled two-stroke conditions. Choosing a certified oil helps ensure compatibility with engine warranties and manufacturer recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCertified to meet marine two-stroke performance benchmarks\u003c\/li\u003e\n  \u003cli\u003eProvides assurance for manufacturer-specified oil standards\u003c\/li\u003e\n  \u003cli\u003eSuitable for recreational and commercial watercraft use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Boaters, tow-sports enthusiasts, marinas, and service shops that operate or maintain water-cooled two-stroke outboards and personal watercraft will find Lucas Oil 10861 practical for routine fueling and seasonal care. It’s aimed at users who want a versatile, NMMA TC-W3® certified option in a convenient one-gallon size for multiple fills, service work, or on-deck storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Lucas Oil 10861 be used in direct-injection two-stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This TC-W3® synthetic blend is suitable for both pre-mix and direct-injection two-stroke marine systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the recommended fuel-to-oil mix ratio?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 50:1 fuel-to-oil ratio unless your engine manufacturer specifies otherwise.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lucas Oil","offers":[{"title":"Default Title","offer_id":54204683321528,"sku":"B01EJ5IGLQ","price":108.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/lucas-oil-10861-front-label-one-gallon.jpg?v=1790636490"},{"product_id":"eterpace-12v-electric-starter-for-riding-mowers-ccw-14-tooth-pmosgr-replacement-fits-mtd-craftsman-troy-bilt","title":"Eterpace 12V Electric Starter for Riding Mowers — CCW 14-Tooth PMOSGR Replacement (Fits MTD, Craftsman, Troy-Bilt)","description":"\u003cp\u003e\u003cstrong\u003eEterpace 12V Electric Starter (model 751-12207 \/ 951-12207) is a direct-fit replacement starter motor engineered to restore reliable cranking for compatible riding mowers and garden tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower struggles to turn over or the original starter has failed, this Eterpace replacement offers a practical way to get back to lawn work quickly. Designed for use with many common residential mower brands, it matches OEM mounting and electrical specifications so installation is straightforward for DIYers and pro technicians alike.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this starter work with?\u003c\/h3\u003e\n\u003cp\u003eThis electric starter is built to fit a wide range of small engine platforms from popular mower manufacturers. It’s compatible with models from MTD, Craftsman, Yard-Man, Troy-Bilt and related brands, covering many riding mowers and garden tractors that require a 12V CCW starter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands: MTD, Craftsman, Yard-Man, Troy-Bilt\u003c\/li\u003e\n  \u003cli\u003eCommon model families: AXO, CUB Cadet, MT\u003c\/li\u003e\n  \u003cli\u003eUsed on riding mowers such as T1000, T1200, R1000\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications I need to know?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, confirm your original starter’s electrical and mechanical specs to ensure fitment. This unit is a 12-volt permanent magnet starter with counterclockwise rotation and a 14-tooth pinion, matching many OEM replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 12V for standard small-engine battery systems\u003c\/li\u003e\n  \u003cli\u003eRotation: Counterclockwise (CCW)\u003c\/li\u003e\n  \u003cli\u003ePinion: 14 teeth for correct engagement with flywheel\u003c\/li\u003e\n  \u003cli\u003eUnit type: PMOSGR (permanent magnet, offset solenoid gear-reduction style)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes it replace my original part number?\u003c\/h3\u003e\n\u003cp\u003eThis Eterpace starter is offered as a direct swap for numerous OEM numbers, making it a convenient replacement if your mower lists any of the listed references. Cross-referenced numbers help you confirm compatibility without guessing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces: 951-12207, 751-12207, 751P12207A and related codes\u003c\/li\u003e\n  \u003cli\u003eOther cross-references: 30369, SCH0065, QDIP90, 410-22067\u003c\/li\u003e\n  \u003cli\u003eAlso found as: ZS82230-QD15-0000, 82230QD150000\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and performance compare to the original?\u003c\/h3\u003e\n\u003cp\u003eThe starter is manufactured to match mounting points and electrical connectors of the original equipment for a straightforward swap. Built for smooth and relatively quiet operation, it aims to restore dependable starting without advanced modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement—minimal modification required\u003c\/li\u003e\n  \u003cli\u003eEngineered for smoother, quieter cranking than worn units\u003c\/li\u003e\n  \u003cli\u003eImproves starting consistency when paired with a healthy battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Eterpace starter is intended for homeowners, landscapers, and small-engine technicians who need a reliable replacement starter for residential riding mowers and garden tractors. If you maintain MTD-family machines or Craftsman\/Troy-Bilt models and your mower uses a 12V CCW starter with a 14-tooth pinion, this unit is a practical, cost-effective repair option to get your machine starting again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAPPLICATION: Compatible with MTD, Craftsman, Yard-Man, Troy-Bilt machines.\u003c\/li\u003e\n  \u003cli\u003eREPLACEMENT PART NUMBERS: 951-12207, 751-12207, 751P12207A, 30369, ZS82230-QD15-0000 and equivalents.\u003c\/li\u003e\n  \u003cli\u003eEFFICIENT CONDITION: Direct replacement to restore starting performance.\u003c\/li\u003e\n  \u003cli\u003eSMOOTH OPERATION: Constructed for steady, quiet cranking.\u003c\/li\u003e\n  \u003cli\u003eSPECIFICATION: PMOSGR unit, 12V, CCW rotation, 14-tooth pinion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my Craftsman riding mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Craftsman uses a 12V CCW starter with a 14-tooth pinion and lists cross numbers like 951-12207 or 751-12207, this Eterpace unit is a compatible direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools and a socket set are usually sufficient; safety measures and battery disconnection are recommended before replacing the starter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Eterpace","offers":[{"title":"Default Title","offer_id":54204945268920,"sku":"B0CJRYGTV5","price":149.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/eterpace-starter-front-view.jpg?v=1790637571"},{"product_id":"briggs-stratton-15w-50-full-synthetic-engine-oil-3-pack-3-1-qt-with-2-oz-fuel-treatment-for-small-engines","title":"Briggs \u0026 Stratton 15W‑50 Full Synthetic Engine Oil 3‑Pack (3×1 qt) with 2 oz Fuel Treatment — For Small Engines","description":"\u003cp\u003e\u003cstrong\u003eBriggs \u0026amp; Stratton's 3-pack bundles three 1‑quart bottles of 15W‑50 full synthetic Vanguard engine oil plus a 2 oz advanced fuel treatment for longer equipment life and cleaner fuel systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for small engines, this kit combines manufacturer-approved full synthetic oil with a concentrated fuel treatment to help reduce deposits and stabilize gasoline. The 15W‑50 viscosity is tuned for many Briggs \u0026amp; Stratton and Vanguard horizontal shaft engines used in lawn mowers, generators, and light construction equipment. The package includes three quarts of oil to cover multiple oil changes and a two-ounce bottle of Power Performance 3‑in‑1 fuel treatment that treats up to 10 gallons of gasoline.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and equipment is this oil and fuel treatment suitable for?\u003c\/h3\u003e\n\n\u003cp\u003eThis 15W‑50 synthetic oil is formulated for air-cooled, four‑stroke small engines where the manufacturer recommends 15W‑50 or full synthetic oil. It meets Briggs \u0026amp; Stratton and Vanguard warranty specifications, making it an appropriate choice for many residential and commercial machines. Always check your engine manual for recommended viscosity and oil type.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Briggs \u0026amp; Stratton and Vanguard horizontal shaft engines\u003c\/li\u003e\n  \u003cli\u003eIdeal for lawn mowers, generators, pressure washers, and small tractors\u003c\/li\u003e\n  \u003cli\u003eMeets warranty requirements when specified in the operator’s manual\u003c\/li\u003e\n  \u003cli\u003eFuel treatment safe for gasoline engines and stabilizes up to 10 gallons\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the full synthetic 15W‑50 oil benefit engine performance?\u003c\/h3\u003e\n\n\u003cp\u003eFull synthetic 15W‑50 offers improved film strength, thermal stability, and reduced wear compared with conventional oils under similar conditions. The higher viscosity at operating temperature helps maintain oil pressure and protect bearings during heavy loads and high operating temperatures common in small engines. The synthetic base also resists breakdown, extending service intervals when used per manufacturer guidance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eImproved wear protection during hot, high‑load operation\u003c\/li\u003e\n  \u003cli\u003eBetter thermal and oxidation resistance than conventional oils\u003c\/li\u003e\n  \u003cli\u003eConsistent oil pressure and lubrication under stress\u003c\/li\u003e\n  \u003cli\u003eReduces frequency of oil breakdown when used correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the Power Performance 3‑in‑1 fuel treatment do and how do I use it?\u003c\/h3\u003e\n\n\u003cp\u003eThe included 2 oz bottle is a concentrated fuel treatment that cleans injectors and carburetor deposits, stabilizes gasoline for storage, and helps maintain combustion efficiency. One bottle treats up to 10 gallons of fuel; add it directly to the tank prior to filling or mix into stored gasoline. It’s formulated for use in small gasoline engines but follow the engine manufacturer’s instructions for additives.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTreats up to 10 gallons per 2 oz bottle\u003c\/li\u003e\n  \u003cli\u003eHelps prevent varnish and gum buildup in fuel systems\u003c\/li\u003e\n  \u003cli\u003eStabilizes fuel for seasonal storage\u003c\/li\u003e\n  \u003cli\u003eEasy pour bottle for direct tank addition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many oil changes will this 3‑pack cover and what are the storage tips?\u003c\/h3\u003e\n\n\u003cp\u003eEach package contains three 1‑quart bottles, so the number of oil changes covered depends on your engine's oil capacity—most residential mower engines use about one quart, so this kit typically supplies up to three changes. Store oil in a cool, dry place away from direct sunlight and keep the fuel treatment tightly closed and out of reach of children. Use within the manufacturer’s recommended shelf life for best results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThree quarts — common for up to three single‑quart oil changes\u003c\/li\u003e\n  \u003cli\u003eStore oil in original sealed containers in cool, dry conditions\u003c\/li\u003e\n  \u003cli\u003eKeep fuel treatment sealed and labeled; avoid contamination\u003c\/li\u003e\n  \u003cli\u003eFollow disposal and recycling guidelines for used oil and containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Briggs \u0026amp; Stratton 3‑pack is aimed at homeowners, landscapers, and light equipment operators who prefer manufacturer‑certified maintenance products. It’s practical for anyone who services multiple machines or wants spare oil on hand, and for users who plan seasonal equipment storage and require a fuel stabilizer. If your operator manual calls for 15W‑50 or Vanguard full synthetic oil, this bundled kit offers a convenient, warranty‑compliant option for routine maintenance and fuel system care.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil compatible with my Briggs \u0026amp; Stratton engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your engine manual lists 15W‑50 or recommends Vanguard full synthetic, this oil meets Briggs \u0026amp; Stratton warranty specs and is compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much fuel does one 2 oz treatment treat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 2 oz bottle treats up to 10 gallons of gasoline when mixed directly into the fuel tank or stored fuel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Briggs \u0026 Stratton","offers":[{"title":"Default Title","offer_id":54205052387512,"sku":"B09WCYZ5XB","price":148.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/briggs-and-stratton-front-packaging.jpg?v=1790639346"},{"product_id":"mannol-sae-30-full-synthetic-lawn-mower-generator-oil-4l-4-stroke-protection-anti-wear","title":"MANNOL SAE 30 Full Synthetic Lawn Mower \u0026 Generator Oil, 4L — 4‑Stroke Protection \u0026 Anti‑Wear","description":"\u003cp\u003e\u003cstrong\u003eMANNOL 7203 SAE 30 is a full synthetic 4‑stroke oil formulated to protect and improve performance of lawn mowers, small tractors, generators and other petrol 4‑stroke engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 4‑litre lubricant blends a highly purified base with modern additives to deliver stable protection across a wide temperature range, reduced wear and improved fuel economy for small outdoor engines. It’s designed for single‑grade SAE 30 applications commonly found in gardening equipment and stationary engines, and it’s compatible with many mineral and synthetic formulations for flexible top‑ups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil protect small petrol engines?\u003c\/h3\u003e\n\n\u003cp\u003eMANNOL 7203 forms a strong oil film that resists oxidation and high temperatures, reducing metal‑to‑metal contact and minimizing wear under load. Its additive package includes anti‑corrosion and anti‑foam agents that help keep moving parts clean and operating smoothly over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh‑viscosity base reduces friction across operating temperatures.\u003c\/li\u003e\n  \u003cli\u003eAntioxidants slow oil breakdown at elevated temperatures.\u003c\/li\u003e\n  \u003cli\u003eAnti‑wear and anti‑corrosion additives protect bearings, pistons and valves.\u003c\/li\u003e\n  \u003cli\u003eAntifoam properties maintain steady oil flow and pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil work in my generator or lawn mower?\u003c\/h3\u003e\n\n\u003cp\u003eYes — it’s formulated for petrol‑powered 4‑stroke air‑ or liquid‑cooled engines commonly used in lawn mowers, mini tractors, power cultivators, generators and powered pumps. Check your equipment manual to confirm SAE 30 is the recommended single‑grade viscosity for your operating temperatures.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for gas 4‑stroke engines used in gardening and stationary equipment.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many mineral and synthetic oils for topping up.\u003c\/li\u003e\n  \u003cli\u003eSafe for use with catalytic converters in compliant engines.\u003c\/li\u003e\n  \u003cli\u003eAppropriate for machines operating under moderate thermal stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect during use?\u003c\/h3\u003e\n\n\u003cp\u003eYou can expect improved fuel efficiency, smoother cold starts and longer component life versus lower‑quality oils due to the refined base and additive package. The oil resists deposit formation on injectors and combustion parts, helping maintain consistent engine response and power delivery.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePotential fuel‑economy gains from reduced internal friction.\u003c\/li\u003e\n  \u003cli\u003eCleaner combustion parts thanks to deposit‑fighting additives.\u003c\/li\u003e\n  \u003cli\u003eSmoother cold starts through robust oil film at lower temperatures.\u003c\/li\u003e\n  \u003cli\u003eConsistent engine performance under load and heat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and use the 4L container?\u003c\/h3\u003e\n\n\u003cp\u003eKeep the 4‑litre container sealed in a cool, dry place away from direct sunlight and sources of ignition. Follow your engine manufacturer’s oil‑change intervals and dispose of used oil and the container in accordance with local regulations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStore upright, sealed, at moderate temperatures.\u003c\/li\u003e\n  \u003cli\u003eUse recommended oil capacities and change intervals from your manual.\u003c\/li\u003e\n  \u003cli\u003eMixing is possible with analogous mineral or synthetic oils if needed.\u003c\/li\u003e\n  \u003cli\u003eRecycle or dispose of used oil responsibly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? MANNOL 7203 SAE 30 full synthetic oil is aimed at owners and operators of small petrol 4‑stroke equipment — gardeners, landscapers, small‑farm users and anyone who maintains generators, lawn mowers, mini tractors or powered pumps requiring SAE 30. It’s a practical choice for people who want a durable single‑grade lubricant that helps extend engine life, maintains performance in typical outdoor applications, and is convenient in a 4‑litre size for regular servicing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is MANNOL 7203 SAE 30 suitable for cold weather use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports reliable cold starts with its oil film, but check your engine manual for single‑grade SAE 30 suitability in your climate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix this oil with other oils?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it can be mixed with similar mineral or synthetic oils, though matching grades and following manufacturer guidance is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MANNOL","offers":[{"title":"Default Title","offer_id":54205074964664,"sku":"B00L96N0XS","price":121.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/mannol-7203-front-label-4l.jpg?v=1790639547"},{"product_id":"cyclemax-kohler-pro-sae-10w-50-synthetic-oil-kit-k1-x300-stoc-2-qt-300-hour-extended-life-with-filter-funnel","title":"CYCLEMAX Kohler Pro SAE 10W-50 Synthetic Oil Kit K1-X300-STOC — 2 qt, 300‑Hour Extended Life with Filter \u0026 Funnel","description":"\u003cp\u003e\u003cstrong\u003eCYCLEMAX Kohler Pro SAE 10W-50 is a 300-hour extended-life synthetic oil kit designed for Kohler lawnmower engines and includes two quarts, an OEM-style oil filter, and a disposable funnel for mess-free changes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete maintenance kit is formulated to meet Kohler’s long-life service interval requirements while simplifying oil changes for residential and commercial users. The blend is SAE 10W-50 synthetic engineered for durability across a wide temperature range and for extended drain intervals up to 300 hours when used in compatible Kohler engines. Along with the oil, the package contains a replacement oil filter and a single-use funnel so you can complete a service quickly without extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil kit support longer service intervals?\u003c\/h3\u003e\n\u003cp\u003eThe 10W-50 synthetic formulation resists breakdown and maintains film strength under prolonged operation, which helps Kohler engines reach extended 300-hour drain intervals when used per Kohler specifications. Stable viscosity and additive protection reduce oxidation and deposit formation over long runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE 10W-50 synthetic base for high temperature stability\u003c\/li\u003e\n  \u003cli\u003eFormulated for Kohler-approved 300-hour intervals\u003c\/li\u003e\n  \u003cli\u003eAntioxidant and dispersant additives to limit sludge\u003c\/li\u003e\n  \u003cli\u003eIncludes recommended oil filter to maintain cleanliness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how does it simplify an oil change?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains two quarts of CYCLEMAX Kohler Pro 10W-50 synthetic oil, a Kohler-compatible oil filter, and a disposable funnel so you have everything needed for a standard service. The funnel reduces spills and the correct filter helps protect the engine between changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 1-quart bottles to match typical Kohler sump capacities\u003c\/li\u003e\n  \u003cli\u003eOEM-style oil filter for proper fit and filtration\u003c\/li\u003e\n  \u003cli\u003eSingle-use funnel for clean, controlled pouring\u003c\/li\u003e\n  \u003cli\u003ePackaged as model K1-X300-STOC for easy reordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and conditions is this oil compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe formula is intended for Kohler small engines that specify SAE 10W-50 synthetic oils and support the 300-hour long-life service program. It’s suitable for mowers and other outdoor power equipment that operate in variable temperatures or under extended run schedules.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to fit Kohler lawnmower engines specifying 10W-50\u003c\/li\u003e\n  \u003cli\u003eIdeal for heavy-duty mowing and commercial use patterns\u003c\/li\u003e\n  \u003cli\u003eWorks across a wide ambient temperature range\u003c\/li\u003e\n  \u003cli\u003eNot for use where manufacturer advises a different viscosity or oil type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and dispose of the oil and filter?\u003c\/h3\u003e\n\u003cp\u003eKeep unopened bottles in a cool, dry place away from direct sunlight and sources of ignition. Used oil and filters should be taken to an authorized recycling center or hazardous-waste facility according to local regulations; do not pour used oil down drains or into the ground.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore upright in original containers at room temperature\u003c\/li\u003e\n  \u003cli\u003eRecycle used oil and filter at certified collection sites\u003c\/li\u003e\n  \u003cli\u003eUse the included funnel for spill-free filling to minimize waste\u003c\/li\u003e\n  \u003cli\u003eFollow Kohler engine manual for disposal and service intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: CYCLEMAX Kohler Pro SAE 10W-50 300-Hour Synthetic Oil Kit is aimed at homeowners who want longer service intervals and cleaner operation from their Kohler-powered mowers, as well as landscapers and small fleets that need dependable oil performance and a convenient, all-in-one maintenance pack. If your engine manual specifies 10W-50 and supports 300-hour long-life oil, this kit provides the oil, filter, and funnel required for on-site servicing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this oil be used in all Kohler engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use in Kohler engines that specify SAE 10W-50 and support 300-hour long-life oil; check your engine manual for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many services does the kit provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Two quarts typically cover one standard oil change for many Kohler mower models; confirm your engine’s oil capacity before servicing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CYCLEMAX","offers":[{"title":"Default Title","offer_id":54205116514488,"sku":"B0D31YZRR8","price":150.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/cyclemax-kohler-pro-front-package.jpg?v=1790639964"},{"product_id":"lux5cpcar-starter-motor-16-tooth-replacement-for-craftsman-lt-series-briggs-stratton-intek-16-26hp-high-torque-direct-fit","title":"LUX5CPCAR Starter Motor 16-Tooth Replacement for Craftsman LT Series \u0026 Briggs Stratton Intek 16–26HP — High Torque, Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eHigh-torque 16-tooth starter motor replacement designed to restore reliable starting power for Craftsman LT1000\/LT3000\/LT4000\/LT2500 and many Briggs Stratton Intek OHV engines (16–26 HP).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis LUX5CPCAR starter motor is a direct-fit replacement built for riding lawn tractors that use a 16-tooth starter gear and plastic or aluminum flywheels. It replaces common OEM part numbers used on Craftsman and John Deere machines and is compatible with a wide range of Briggs \u0026amp; Stratton Intek OHV engines from 16 to 26 HP. Manufactured for durability, the unit provides strong cranking torque, straightforward installation, and a cost-effective alternative to factory parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter work with my Craftsman or Briggs engine?\u003c\/h3\u003e\n\u003cp\u003eIf your tractor lists a 16-tooth starter and uses a plastic or aluminum flywheel, this unit is engineered to match its mechanical requirements. It replaces multiple common OEM starters and fits specific Craftsman model series and Briggs \u0026amp; Stratton Intek OHV engines from 16HP up to 26HP.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Craftsman LT1000, LT3000, LT4000, LT2500, GT5000 models.\u003c\/li\u003e\n  \u003cli\u003eDesigned for Briggs \u0026amp; Stratton Intek OHV 16HP–26HP engines.\u003c\/li\u003e\n  \u003cli\u003eFits John Deere LA135\/LA145\/LA150\/LA165\/LA175 and several E-series models as listed.\u003c\/li\u003e\n  \u003cli\u003eRequires plastic or aluminum flywheel (not for steel flywheels).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance; typical jobs require hand tools and 20–45 minutes. The package contains the starter motor and a 16-tooth gear so you have what’s needed to replace a worn or damaged drive assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 starter motor and 1 16-tooth gear.\u003c\/li\u003e\n  \u003cli\u003eQuick-mount bolt pattern matches common mower frames—no major modifications.\u003c\/li\u003e\n  \u003cli\u003eElectrical terminals are ready for standard tractor wiring connections.\u003c\/li\u003e\n  \u003cli\u003eInstallation saves mower downtime and avoids costly shop charges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis starter is built to deliver consistent cranking force, helping cold starts and repeated use during mowing season. Its construction uses durable components aimed at resisting wear from frequent engagement while providing the torque necessary for larger displacement Intek engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh torque output suitable for heavy-duty, high-displacement engines.\u003c\/li\u003e\n  \u003cli\u003eWear-resistant materials on the drive gear and housing for extended life.\u003c\/li\u003e\n  \u003cli\u003eEngineered as a replacement for several Briggs \u0026amp; Stratton and John Deere starters.\u003c\/li\u003e\n  \u003cli\u003eReduces repeated starter failures when matched to the correct flywheel type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This LUX5CPCAR starter motor is ideal for homeowners, landscapers, and repair shops needing an affordable, reliable replacement for 16-tooth starters on Craftsman, John Deere, or Briggs \u0026amp; Stratton-powered riding mowers. Choose this unit if your tractor uses a plastic or aluminum flywheel and you want a durable, easy-to-install option that restores dependable starting performance without the OEM price tag.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter compatible with steel flywheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This unit is intended for use with plastic or aluminum flywheels only, not steel flywheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include the gear needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains the starter motor plus a 16-tooth gear necessary for replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LUX5CPCAR","offers":[{"title":"Default Title","offer_id":54205526245560,"sku":"B0F4M97XH4","price":135.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/lux5cpcar-starter-front-view.jpg?v=1790643964"},{"product_id":"echo-red-armor-2-cycle-oil-blend-12-pack-6-4-oz-bottles-50-1-mix-for-2-5-gal","title":"ECHO Red Armor 2-cycle Oil Blend 12-Pack 6.4 oz Bottles — 50:1 Mix for 2.5 gal","description":"\u003cp\u003e\u003cstrong\u003eECHO Red Armor 6.4 oz 2-cycle oil blend — twelve factory-sealed bottles sized to make a 50:1 mix for 2-1\/2 gallons, designed to simplify fuel mixing for ECHO 2-cycle engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your handheld two-stroke equipment running smoothly with this 12-pack of ECHO Red Armor 6.4 oz bottles. Each bottle measures the exact quantity needed to create a 50:1 fuel-to-oil ratio when mixed into 2.5 gallons of gasoline, so you can quickly prepare properly lubricated fuel for blowers, trimmers, chainsaws and other small engines. These are genuine OEM Echo part #6550025, supplied as a consistent blend that fits manufacturer recommendations for many ECHO models.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use these bottles to prepare fuel for my ECHO tools?\u003c\/h3\u003e\n\u003cp\u003eEach 6.4 oz bottle is pre-measured for a single 2.5-gallon 50:1 mix, so no calculations or measuring cups are needed. Pour one bottle into 2.5 gallons of fresh unleaded gasoline, shake or stir the container until fully mixed, then fill your tool’s tank as directed in the operator’s manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne bottle per 2.5 gallons for a 50:1 ratio\u003c\/li\u003e\n  \u003cli\u003eUse fresh, quality unleaded gasoline (check equipment manual)\u003c\/li\u003e\n  \u003cli\u003eMix in a clean fuel container and label it with mix ratio and date\u003c\/li\u003e\n  \u003cli\u003eStore unused bottles in a cool, dry place away from open flames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose an OEM ECHO oil blend instead of a generic product?\u003c\/h3\u003e\n\u003cp\u003eOEM oil blends are formulated to meet the specifications intended by the equipment manufacturer. Using genuine ECHO Red Armor helps maintain consistent viscosity and additives that support two-stroke lubrication, reducing the guesswork when matching oil to your machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to ECHO specifications (part #6550025)\u003c\/li\u003e\n  \u003cli\u003eConsistent blend and bottle sizing for repeatable mixes\u003c\/li\u003e\n  \u003cli\u003eReduces risk of incorrect ratios compared with manual measuring\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatibility with many ECHO two-stroke engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these bottles be used with other brands or different mix ratios?\u003c\/h3\u003e\n\u003cp\u003eThe bottles are pre-measured for a 50:1 mix into 2.5 gallons and will physically work with other 2-stroke equipment if that ratio is appropriate. For engines requiring different ratios, adjust by using the correct volume or a different oil product recommended by the equipment manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for any engine that specifies 50:1 at 2.5 gallons\u003c\/li\u003e\n  \u003cli\u003eNot suitable if your manual calls for a different oil-to-fuel ratio\u003c\/li\u003e\n  \u003cli\u003eCompatible with common gasoline blends; follow engine fuel recommendations\u003c\/li\u003e\n  \u003cli\u003eConsult your tool manual for brand-specific guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle the 12-pack to keep it safe and usable?\u003c\/h3\u003e\n\u003cp\u003eKeep bottles upright in a ventilated, cool area away from direct sunlight and heat sources. Avoid puncturing or exposing the containers to open flames; dispose of empty bottles according to local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore bottles sealed and upright in a cool, dry place\u003c\/li\u003e\n  \u003cli\u003eKeep away from sparks, flames, or extreme heat\u003c\/li\u003e\n  \u003cli\u003eLabel mixed fuel and use within recommended storage time\u003c\/li\u003e\n  \u003cli\u003eFollow local disposal rules for used oil containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 12-pack is aimed at professionals and homeowners who routinely operate ECHO two-stroke equipment and prefer the convenience of pre-measured OEM oil bottles. It’s a good match for landscapers, property caretakers, rental operations, and any user who wants to eliminate mixing mistakes and keep tools maintained according to manufacturer recommendations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many gallons can one 6.4 oz bottle mix?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 6.4 oz bottle mixes into 2.5 gallons of gasoline at a 50:1 ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil compatible with non-ECHO two-stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if the engine specifies a 50:1 mix; always follow the equipment manufacturer's recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54205537288376,"sku":"B09WJQ62LR","price":148.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-red-armor-front-packaging_d064d0e0-2f70-4f77-95fb-80c4e0a0350e.jpg?v=1790644053"},{"product_id":"husqvarna-2-stroke-engine-oil-xp-1-gallon-jaso-fd-synthetic-blend-for-chainsaws-trimmers","title":"Husqvarna 2-Stroke Engine Oil XP+ 1 Gallon — JASO FD Synthetic-Blend for Chainsaws \u0026 Trimmers","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna 593152305 XP+ 2-Stroke Engine Oil is a high-performance, JASO FD-certified synthetic blend in a 1-gallon bottle formulated for low operating temperatures and clean combustion in modern 2-stroke engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis engine oil is designed for professional and homeowner use in chainsaws, blowers, trimmers and other air-cooled 2-stroke outdoor power equipment. The XP+ formula meets Husqvarna's verified engine standard and is certified to JASO FD (ISO-EGD, API TC), offering improved lubrication, reduced deposits, and controlled exhaust emissions when mixed at recommended ratios. Supplied in a one-gallon container, this concentrate mixes at 50:1 to create up to 50 gallons of ready-to-use fuel, simplifying storage and fueling chores for frequent users.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil protect high-revving chainsaws and trimmers?\u003c\/h3\u003e\n\u003cp\u003eThe XP+ formula is engineered to maintain a stable oil film at high rpm, lowering friction and wear on piston rings and cylinder walls. By keeping operating temperatures down and reducing metal-to-metal contact, it helps extend component life under demanding cuts and extended runtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow operating temperature reduces heat-related wear and detonation risk\u003c\/li\u003e\n  \u003cli\u003eSynthetic blend ensures consistent lubrication at high revs\u003c\/li\u003e\n  \u003cli\u003eFormulated to limit piston ring and cylinder scoring\u003c\/li\u003e\n  \u003cli\u003eJASO FD certification verifies deposit control performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil keep engines cleaner and reduce smoke?\u003c\/h3\u003e\n\u003cp\u003eYes — the Husqvarna XP+ cleaner engine formula minimizes carbon and gum buildup while promoting more complete combustion. That means fewer spark plug fouling issues and crisper idle behavior over time, which also helps reduce visible exhaust smoke compared with lower-grade oils.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCleaner combustion reduces carbon deposits on piston crowns\u003c\/li\u003e\n  \u003cli\u003eLess fouling supports longer spark plug life and stable idle\u003c\/li\u003e\n  \u003cli\u003eDesigned to lower visible smoke with properly tuned equipment\u003c\/li\u003e\n  \u003cli\u003eISO-EGD\/API TC base supports modern fuel systems and components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mix and store the one-gallon concentrate for best results?\u003c\/h3\u003e\n\u003cp\u003eThis 1-gallon bottle is concentrated for a 50:1 mixing ratio (oil:fuel), producing up to 50 gallons of premixed fuel. For accurate mixing, measure volume precisely, combine in a clean approved container, and agitate briefly. Store unopened at moderate temperatures away from direct sun, and use mixed fuel within recommended fuel-stability windows for best performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix at 50:1 to make up to 50 gallons of useable fuel\u003c\/li\u003e\n  \u003cli\u003eUse an approved, labeled fuel container and measure accurately\u003c\/li\u003e\n  \u003cli\u003eStore sealed away from heat and sunlight to preserve quality\u003c\/li\u003e\n  \u003cli\u003eUse mixed fuel within a few weeks to avoid degradation (follow equipment guidance)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat certifications and features verify performance?\u003c\/h3\u003e\n\u003cp\u003eHusqvarna labels this product as a verified engine formula, and it carries JASO FD certification (also meeting ISO-EGD and API TC benchmarks). Those standards indicate high levels of lubricity, thermal stability, and deposit control suitable for many modern 2-stroke engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHusqvarna verified engine formula for consistent OEM-grade results\u003c\/li\u003e\n  \u003cli\u003eJASO FD certified for deposit control and lubricity\u003c\/li\u003e\n  \u003cli\u003eISO-EGD and API TC compatibility with many 2-stroke engines\u003c\/li\u003e\n  \u003cli\u003eLow operating temperature profile for cooler engine running\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Husqvarna 593152305 XP+ 2-Stroke Engine Oil is aimed at professional landscapers, arborists, and serious homeowners who demand reliable, low-smoke lubrication for chainsaws, trimmers, blowers and similar 2-stroke tools. If you run modern air-cooled engines frequently or want to minimize maintenance and deposits, this concentrated gallon provides an economical, verified option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the correct mixing ratio for this oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mix at 50:1 (oil to fuel); one gallon of oil makes up to 50 gallons of premixed fuel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil compatible with modern 2-stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is JASO FD certified (ISO-EGD, API TC) and formulated for modern air-cooled 2-stroke equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54205820862648,"sku":"B07DGZBDPZ","price":146.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-593152305-gallon-front-label.jpg?v=1790646398"},{"product_id":"husqvarna-xp-2-cycle-oil-12-pack-6-4-oz-bottles-for-2-5-gal-mix-low-smoke-anti-wear-formula","title":"Husqvarna XP 2-Cycle Oil 12-Pack — 6.4 oz Bottles for 2.5 gal Mix, Low-Smoke Anti-Wear Formula","description":"\u003cstrong\u003eHusqvarna XP 2-Cycle Oil 6.4 oz (12-pack) provides the correct pre-measured lubricant for a 2.5-gallon fuel mix, formulated for high-performance two-stroke engines.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit contains twelve 6.4-ounce bottles of Husqvarna 593152303S XP+ two-stroke oil, sized to simplify mixing for a 2.5-gallon fuel batch. The formulation is tailored to protect modern air-cooled two-stroke engines, helping reduce visible smoke, support reliable lubrication, and resist wear during heavy use. Because each bottle measures the exact quantity needed for a 2.5-gallon mix, the pack removes guesswork and makes fuel preparation faster and cleaner.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose this specific 12-pack for routine fuel mixing?\u003c\/h3\u003e\n\u003cp\u003eBuying the 12-pack gives you a year’s worth of pre-measured oil for frequent operators, reducing trips to buy single bottles and cutting mixing errors. The factory-sized dose preserves proper oil-to-gas ratios and keeps engines running as intended by Husqvarna engineers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes twelve 6.4 oz bottles, each exactly for a 2.5-gallon mix.\u003c\/li\u003e\n  \u003cli\u003eEliminates measurement tools and reduces spills while mixing.\u003c\/li\u003e\n  \u003cli\u003eBulk pack is cost-efficient for commercial users and busy homeowners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this oil support engine durability and cleanliness?\u003c\/h3\u003e\n\u003cp\u003eThe XP+ two-stroke oil is formulated to minimize deposits and reduce exhaust smoke compared with untreated fuel, helping the engine run cleaner. Its additives protect internal components from wear and corrosion, extending service intervals when used according to manufacturer guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-wear additives protect piston rings and bearings under load.\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors help preserve metal parts during storage.\u003c\/li\u003e\n  \u003cli\u003eCleaner combustion reduces visible smoke and port fouling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this oil compatible with other brands and modern engines?\u003c\/h3\u003e\n\u003cp\u003eAlthough designed by Husqvarna, the XP+ two-stroke formula is compatible with most air-cooled two-stroke engines when mixed at the recommended ratio. Always check your equipment manual for any brand-specific restrictions, but many professionals use this oil across handheld tools and small engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for chainsaws, trimmers, blowers, and other two-stroke equipment.\u003c\/li\u003e\n  \u003cli\u003eWorks with both Husqvarna and many other OEM two-stroke engines.\u003c\/li\u003e\n  \u003cli\u003eUse only at the manufacturer's recommended oil-to-fuel ratio.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the packaging help with on-the-job convenience?\u003c\/h3\u003e\n\u003cp\u003eEach 6.4-ounce bottle is sized to pour directly into a 2.5-gallon fuel container without measuring, making field refueling quick and tidy. The compact bottles are easy to store in a tool box or service van and reduce wasted oil from overpouring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-measured bottles eliminate measuring cups and funnels in many situations.\u003c\/li\u003e\n  \u003cli\u003eSecure caps minimize leakage during transport and storage.\u003c\/li\u003e\n  \u003cli\u003eCompact format is easy to stock in bulk for contractors or busy homeowners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 12-pack of Husqvarna 6.4 oz XP+ two-stroke oil is ideal for professionals, landscapers, rental yards, and homeowners who use two-stroke equipment regularly and want a convenient, OEM-recommended lubricant for accurate 2.5-gallon fuel mixes. It suits anyone who values consistent oil-to-fuel ratios, reduced mixing time, and improved engine cleanliness across multiple small engines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mix does each 6.4 oz bottle make?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each 6.4 oz bottle is measured for one 2.5-gallon gasoline mix at the manufacturer's recommended ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in non-Husqvarna two-stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the XP+ formula is compatible with most air-cooled two-stroke engines, but always confirm your equipment's manual first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54206553784504,"sku":"B07L4YD2V8","price":119.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-xp-bottles-group.jpg?v=1790651631"},{"product_id":"echo-powerblend-gold-2-cycle-oil-one-gallon-50-1-premixed-oem-grade-for-chainsaws-trimmers","title":"ECHO PowerBlend Gold 2-Cycle Oil — One Gallon 50:1 Premixed OEM-Grade for Chainsaws \u0026 Trimmers","description":"\u003cstrong\u003eA one-gallon bottle of ECHO PowerBlend Gold 2-Cycle oil premixed at the factory for 50:1 fuel-to-oil ratio, made to fit small engines that require a balanced 2-stroke lubricant.\u003c\/strong\u003e\n\n\u003cp\u003eKeep two-stroke engines running smoothly with the genuine ECHO PowerBlend Gold 6450050G — a factory-formulated 2-cycle oil supplied in a one-gallon container for convenient storage and easy refilling. This product is intended for use where manufacturers specify a 50:1 fuel-to-oil mix and where OEM-grade lubrication is preferred for consistent combustion and protected moving parts. It’s a ready supply for landscapers, property owners, and contractors who use chainsaws, trimmers, blowers, and other handheld or small-engine equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines is this 50:1 PowerBlend oil designed for?\u003c\/h3\u003e\n\u003cp\u003eThis premixed 2-cycle blend is made for small two-stroke engines that call for a 50:1 fuel-to-oil ratio. It suits handheld and portable equipment from commercial and homeowner lines when the maker specifies a 50:1 mix and OEM-compatible oil.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHandheld tools: chainsaws, string trimmers, brushcutters, blowers\u003c\/li\u003e\n  \u003cli\u003ePortable equipment where 50:1 is recommended by the engine maker\u003c\/li\u003e\n  \u003cli\u003eEngines requiring a premium 2-stroke formulation for consistent combustion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does using factory-blended oil change maintenance routines?\u003c\/h3\u003e\n\u003cp\u003eUsing a factory premix removes the need to measure oil during fueling and reduces mixing errors, saving time and lowering the chance of improper ratios. It also simplifies inventory: one bottle covers many fill-ups for smaller tanks, especially in busy or commercial settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo measuring cups or mixing needed at the jobsite\u003c\/li\u003e\n  \u003cli\u003eLess chance of over- or under-oiling fuel\u003c\/li\u003e\n  \u003cli\u003eFaster refills during continuous use or high-volume work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat handling and storage tips maximize product performance?\u003c\/h3\u003e\n\u003cp\u003eStore the sealed gallon in a cool, dry place away from direct sunlight and extreme temperatures to keep the oil stable. Keep the cap tightly closed to prevent contamination; once opened, use within the timeframe recommended by standard lubricant storage practices for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep bottle upright and sealed when not in use\u003c\/li\u003e\n  \u003cli\u003eStore away from heat sources and open flames\u003c\/li\u003e\n  \u003cli\u003eMaintain clean pour spout or use a funnel to avoid dirt entering the bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there compatibility or warranty considerations when choosing OEM oil?\u003c\/h3\u003e\n\u003cp\u003eChoosing an OEM-branded oil like ECHO PowerBlend Gold helps align with the manufacturer's lubrication recommendations and may support engine performance expectations. Always follow your engine maker’s manual for approved lubricants and warranty-related guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the engine owner’s manual for approved 2-stroke oil specs\u003c\/li\u003e\n  \u003cli\u003eUsing OEM or OEM-recommended oil can simplify service discussions\u003c\/li\u003e\n  \u003cli\u003eRetain purchase records if warranty questions arise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ECHO PowerBlend Gold 1-gallon premix is aimed at professionals and serious homeowners who run 2-cycle equipment often and want the convenience of a factory-mixed 50:1 oil choice that aligns with OEM recommendations. It’s particularly useful for landscape companies, rental fleets, and property managers who require consistent fueling practices, reduced downtime, and a trusted brand part number (6450050G) for ordering and inventory tracking.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this ECHO PowerBlend with any 2-stroke engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use it with engines that specifically require a 50:1 fuel-to-oil ratio; always confirm compatibility in your engine manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I store an opened gallon of premix oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Keep it sealed upright in a cool, dry place out of direct sunlight and use it within a reasonable time to avoid contamination.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54207002017976,"sku":"B000PSAJVW","price":149.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-powerblend-gallon-front.jpg?v=1790654057"},{"product_id":"husqvarna-xp-2-cycle-oil-24-pack-2-6-oz-pre-measured-bottles-for-1-gallon-mix-oem","title":"Husqvarna XP+ 2-Cycle Oil 24-Pack — 2.6 oz Pre-Measured Bottles for 1-Gallon Mix, OEM","description":"\u003cp\u003e\u003cstrong\u003eHusqvarna 24-pack XP+ 2-cycle oil supplies twenty-four 2.6 oz metered bottles engineered to create the correct 1-gallon fuel mix for high-performance two-stroke engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you run multiple chainsaws, blowers, trimmers or other two-stroke machines, consistent oil mixing matters for engine life and dependable operation. This 24-pack of Husqvarna OEM XP+ 2-stroke oil (part 593152301S \/ 610000130) delivers pre-measured bottles to mix precisely with one gallon of gasoline, reducing guesswork and keeping lubrication consistent across services.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pre-measured 2.6 oz bottle system simplify fuel mixing?\u003c\/h3\u003e\n\u003cp\u003eThe single-use 2.6 oz bottles are sized to match the standard 50:1 or manufacturer-recommended ratios when combined with one gallon of gasoline, so you don’t need measuring cups or pumps. That reduces spills, saves time, and ensures every batch has the correct oil-to-fuel ratio for predictable performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEach bottle holds 2.6 ounces, pre-measured for a 1-gallon mix.\u003c\/li\u003e\n  \u003cli\u003eDisposable, single-use format eliminates measuring errors.\u003c\/li\u003e\n  \u003cli\u003e24 bottles included — supplies for many fuel batches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits does Husqvarna XP+ 2-stroke oil provide?\u003c\/h3\u003e\n\u003cp\u003eXP+ is formulated for modern air-cooled two-stroke engines and focuses on lubrication, reduced deposits, and cleaner exhaust. It helps protect moving parts from wear, aids in keeping the combustion chamber cleaner, and is balanced to support efficient fuel burn without heavy residue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to reduce wear on critical engine components.\u003c\/li\u003e\n  \u003cli\u003eFormulation minimizes visible exhaust smoke and residue build-up.\u003c\/li\u003e\n  \u003cli\u003eSupports smoother throttle response and consistent operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this oil with non-Husqvarna two-stroke engines?\u003c\/h3\u003e\n\u003cp\u003eYes — the XP+ formula is compatible with most air-cooled two-stroke engines that require conventional mineral or semi-synthetic two-cycle oil. Always check your machine’s owner manual for approved oil specifications and recommended mix ratios before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for many brands of two-stroke handheld equipment.\u003c\/li\u003e\n  \u003cli\u003eFollow the equipment manual for the correct mix ratio if not 1 gallon.\u003c\/li\u003e\n  \u003cli\u003eNot intended for water-cooled or industrial oil blends unless specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle these single-use oil bottles?\u003c\/h3\u003e\n\u003cp\u003eKeep the bottles in a cool, dry place away from direct sunlight and open flames. The small, sealed containers are convenient for on-site storage in a tool bag or service box and can be opened individually when preparing a fuel mix.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore upright at moderate temperatures to preserve shelf life.\u003c\/li\u003e\n  \u003cli\u003eKeep away from sparks, open flames, and children’s reach.\u003c\/li\u003e\n  \u003cli\u003eDispose of empty bottles according to local recycling and waste rules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 24-pack is ideal for landscapers, arborists, rental fleets, and homeowners who service multiple two-stroke machines or prefer the convenience of pre-measured oil. If you want consistent, OEM-spec lubrication without measuring each time, Husqvarna’s XP+ 2.6 oz bottles save time, reduce waste, and help maintain engine performance across frequent refuels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What ratio does each 2.6 oz bottle mix for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each 2.6 oz bottle is pre-measured to mix with one gallon of gasoline at the manufacturer-recommended ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil suitable for other brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. XP+ works in most air-cooled two-stroke engines, but always verify your equipment's oil requirements first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":54207556026552,"sku":"B07L4YMZPG","price":135.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/husqvarna-pack-front-label.jpg?v=1790656180"},{"product_id":"valvoline-maxlife-high-mileage-150k-10w-30-motor-oil-5-qt-seal-conditioner-moly-anti-wear","title":"Valvoline MaxLife High Mileage 150K 10W-30 Motor Oil 5 Qt — Seal Conditioner \u0026 Moly Anti-Wear","description":"\u003cp\u003e\u003cstrong\u003eValvoline MaxLife High Mileage 150K 10W-30 is a synthetic-blend engine oil formulated to protect and revitalize vehicles with 150,000 miles or more by reducing wear, combating sludge, and conditioning seals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eHigh-mileage engines face unique stresses: hardened seals, increased friction, deposit buildup and higher operating temperatures. Valvoline’s MaxLife High Mileage 150K 10W-30 blends performance additives, seal conditioners and a Moly anti-wear package to restore flexibility to seals, lower friction on metal surfaces and help keep passages clean. This five-quart container supplies the protection older gasoline engines need to run more reliably between maintenance intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil reduce leaks and lower oil consumption?\u003c\/h3\u003e\n\u003cp\u003eMaxLife High Mileage 150K includes premium seal conditioners that help soften and restore older rubber and elastomer components. Softer seals conform better to mating surfaces, reducing weeps and slow leaks that develop with age and heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeal conditioners restore flexibility to hardened seals.\u003c\/li\u003e\n  \u003cli\u003eFormula targets reduced oil consumption in worn engines.\u003c\/li\u003e\n  \u003cli\u003eSuitable for engines showing minor seepage or increased consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does it provide against wear, heat, and sludge?\u003c\/h3\u003e\n\u003cp\u003eThe oil delivers enhanced anti-wear performance through a Moly additive that forms a protective film on metal parts to minimize friction and heat generation. Added detergents and antioxidants fight deposits and thermal breakdown, helping to prevent sludge and varnish in older engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMoly anti-wear additive reduces friction on vulnerable surfaces.\u003c\/li\u003e\n  \u003cli\u003eDetergents keep engine internals cleaner under heavy use.\u003c\/li\u003e\n  \u003cli\u003eAntioxidants help maintain oil stability at higher operating temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this oil compatible with modern engine specifications and requirements?\u003c\/h3\u003e\n\u003cp\u003eYes—Valvoline MaxLife High Mileage 150K 10W-30 meets or exceeds many current industry standards and OEM needs for gasoline engines. It satisfies ILSAC GF-7A and API categories including SP and SN, and carries additional specifications such as Chrysler MS-13340, making it suitable for a wide range of vehicles that call for 10W-30 grades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets ILSAC GF-7A and API SP\/SN requirements.\u003c\/li\u003e\n  \u003cli\u003eCompatible with engines calling for API SN, SN PLUS and prior standards.\u003c\/li\u003e\n  \u003cli\u003eWorks for many Chrysler-spec applications (MS-13340).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will I notice the difference after switching to this oil?\u003c\/h3\u003e\n\u003cp\u003eDrivers typically observe smoother idle, steadier oil pressure and reduced visible leak symptoms as seals regain pliability and deposits are controlled. Improved wear protection can translate into more consistent performance and potentially longer component life, especially in engines that have exceeded 150,000 miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother engine operation and steadier oil pressure.\u003c\/li\u003e\n  \u003cli\u003eFewer visible leaks and reduced top-offs between changes.\u003c\/li\u003e\n  \u003cli\u003eCleaner internals versus untreated, high-mileage engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Valvoline MaxLife High Mileage 150K 10W-30 5 Quart is intended for gasoline-powered cars, trucks and SUVs that have reached roughly 150,000 miles or more and need a targeted high-mileage formulation. Choose this oil if you want a synthetic-blend solution that focuses on seal conditioning, stronger sludge defense and extra anti-wear protection while meeting modern industry specifications. If your vehicle suffers from mild leaks, increased oil use, or visible sludge, this product provides a practical maintenance step to help preserve engine function between services.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in engines with less than 150,000 miles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. While formulated for 150K+ engines, it’s compatible with any gasoline engine that calls for 10W-30; benefits are most noticeable in high-mileage vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change this oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle manufacturer’s interval. Typical changes are every 5,000–7,500 miles, or as indicated by your oil-life monitoring system.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":54207757746360,"sku":"B08YRYF38J","price":127.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/valvoline-maxlife-high-mileage-150k-10w30-front-label.jpg?v=1790656958"},{"product_id":"aceup-energy-173cc-vertical-shaft-gas-engine-4-4hp-7-8-shaft-primer-assisted-cold-start","title":"Aceup Energy 173cc Vertical Shaft Gas Engine 4.4HP — 7\/8\" Shaft, Primer-Assisted Cold Start","description":"\u003cp\u003e\u003cstrong\u003eAceup Energy's vertical-shaft 4.4HP 173cc gas engine is a compact, EPA-compliant 4-stroke OHV motor built for lawn mowers and small equipment that need reliable torque, a primer-assisted cold start, and durable metal internals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-cylinder engine delivers practical power for walk-behind mowers, tillers, and other yard machines that accept a 7\/8\" diameter vertical shaft. Designed with a recoil start and an enrichment primer for easier first or cold starts, the unit balances usable peak power with long-life components like forged crankshafts and a cast-iron cylinder liner. It ships functionally tested and includes one year of limited warranty coverage plus free lifetime technical guidance from Aceup Energy.\u003c\/p\u003e\n\n\u003ch3\u003eHow much power and torque does this engine produce?\u003c\/h3\u003e\n\u003cp\u003eThe Aceup Energy 173cc motor develops up to 4.4 horsepower at 3600 RPM and a maximum torque of 8.5 N·m at 2500 RPM. Rated maximum working speeds fall between 2500 and 2800 RPM, which suits many consumer lawn and garden tools that require steady midrange torque.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePeak horsepower: 4.4 HP at 3600 RPM\u003c\/li\u003e\n  \u003cli\u003eMax torque: 8.5 N·m at 2500 RPM\u003c\/li\u003e\n  \u003cli\u003eWorking speed range: 2500–2800 RPM\u003c\/li\u003e\n  \u003cli\u003eFuel capacity: 0.9 gallon for extended run periods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the shaft and mounting details for fitting to equipment?\u003c\/h3\u003e\n\u003cp\u003eThis is a vertical shaft engine with a 7\/8\" (0.875\") diameter output shaft and a 3.16\" exposed length; the shaft end is tapped 3\/8\"-24 UNF for secure attachment. A 3\/16\" keyway is machined into the shaft to transfer torque reliably to pulleys or blades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShaft diameter: 7\/8\" (0.875\")\u003c\/li\u003e\n  \u003cli\u003eShaft exposed length: 3.16\" with 3\/8\"-24 UNF tapped end\u003c\/li\u003e\n  \u003cli\u003eKeyway: 3\/16\" for positive drive engagement\u003c\/li\u003e\n  \u003cli\u003eVertical configuration for direct mower blade or gearbox coupling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features improve starting reliability and durability?\u003c\/h3\u003e\n\u003cp\u003eStarting is aided by an enrichment primer; press the red primer 3–5 times for initial or full cold starts, while a hot engine restart normally needs no priming. Internals include metal cams, forged crankshafts, and a cast-iron cylinder liner to reduce wear and extend service life under regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecoil (pull) start for simple, tool-free starting\u003c\/li\u003e\n  \u003cli\u003eEnrichment pump primer for cold-start assistance\u003c\/li\u003e\n  \u003cli\u003eDurable internals: forged crankshaft, metal cams, cast-iron liner\u003c\/li\u003e\n  \u003cli\u003eShips functionally tested and EPA-compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty come with the engine?\u003c\/h3\u003e\n\u003cp\u003eAceup Energy backs this gas motor with a 1-year limited warranty for normal use and provides free lifetime technical guidance from their experts. All engines are functionally tested before leaving the factory to help ensure dependable operation on arrival.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year limited warranty under normal consumer use\u003c\/li\u003e\n  \u003cli\u003eFree lifetime technical support from Aceup Energy specialists\u003c\/li\u003e\n  \u003cli\u003eFactory function testing and EPA compliance\u003c\/li\u003e\n  \u003cli\u003eReplacement parts and service guidance available from the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This vertical-shaft 173cc engine is aimed at homeowners, landscapers, and small-equipment fabricators who need a compact, moderately powerful motor for lawn mowers, small tillers, or custom builds that accept a 7\/8\" vertical output shaft. Choose this model if you value easy cold starts, proven mechanical components, and manufacturer-backed support rather than industrial-scale power.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this engine require a primer for every start?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Press the red primer 3–5 times for first or cold starts; hot engine restarts typically do not need priming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What shaft size and keyway does the engine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 7\/8\" diameter vertical shaft, 3.16\" exposed, with a 3\/16\" keyway and 3\/8\"-24 UNF tapped end.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aceup Energy","offers":[{"title":"Default Title","offer_id":54208247136440,"sku":"B0D48ZW86X","price":355.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/aceup-energy-vertical-shaft-front-view.jpg?v=1790660519"},{"product_id":"echo-2-stroke-oil-48-pack-5-2-fl-oz-bottles-power-blend-gold-semi-synthetic-low-smoke","title":"ECHO 2-stroke Oil 48 Pack 5.2 fl oz Bottles — Power Blend GOLD Semi-Synthetic Low-Smoke","description":"\u003cp\u003e\u003cstrong\u003eECHO Power Blend GOLD is a semi-synthetic 2-stroke oil formulated for air-cooled outdoor power equipment, sold as 48 bottles of 5.2 fl oz for reliable 2-cycle fuel mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned and manufactured exclusively for ECHO to replace OEM# 6450002, this improved Power Blend GOLD delivers better cleaning, reduced smoke and extended fuel stability for small engines. It meets and surpasses industry performance standards (ISO-L-EGD and JASO M345\/FD) and includes additives to limit exhaust port build-up, protect metal parts from rust and wear, and help fuel remain usable longer.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this oil improve performance for my 2-stroke tools?\u003c\/h3\u003e\n\u003cp\u003ePower Blend GOLD reduces deposits in the combustion chamber and exhaust, helping engines run cleaner and maintain power. Its semi-synthetic formula offers balanced lubrication to reduce wear without producing excessive smoke.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced detergents reduce carbon and varnish formation\u003c\/li\u003e\n  \u003cli\u003eLow-smoke additives minimize visible emissions\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors protect internal metal surfaces\u003c\/li\u003e\n  \u003cli\u003eFormulated for consistent lubrication across RPM ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and mixes is this oil compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis oil is certified for use in air-cooled, 2-stroke outdoor power equipment such as string trimmers, chainsaws, blowers and edgers. It’s designed for standard 2-cycle fuel mixing ratios used by manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for most 2-stroke, air-cooled handheld and small portable engines\u003c\/li\u003e\n  \u003cli\u003eMeets ISO-L-EGD and JASO M345\/FD performance classes\u003c\/li\u003e\n  \u003cli\u003eWorks with common gas-to-oil mix ratios used in outdoor tools\u003c\/li\u003e\n  \u003cli\u003eReplaces ECHO OEM# 6450002 for direct compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Power Blend GOLD extend fuel life and reduce maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe blend includes a fuel stabilizer and detergents that slow fuel degradation and keep carburetors and ports cleaner, so equipment can sit longer between uses with less need for cleaning or rebuild work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel stabilizer helps maintain gasoline quality over time\u003c\/li\u003e\n  \u003cli\u003eFewer deposits mean less frequent carburetor servicing\u003c\/li\u003e\n  \u003cli\u003ePrevents exhaust port blockage that can reduce power\u003c\/li\u003e\n  \u003cli\u003eHelps maintain smooth idling and easier cold starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat packaging and value does the 48-pack deliver?\u003c\/h3\u003e\n\u003cp\u003eThis offering provides bulk supply of 5.2 fl oz bottles — a practical size for accurate measuring and transport — giving service shops, landscapers and heavy DIY users enough oil for many tanks of fuel without frequent reordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e48 individually sealed 5.2 fl oz bottles—convenient for single-tank mixing\u003c\/li\u003e\n  \u003cli\u003eBulk packaging reduces purchase frequency and downtime\u003c\/li\u003e\n  \u003cli\u003eSmall bottles minimize spills and leftover waste\u003c\/li\u003e\n  \u003cli\u003eOEM replacement part number 6450002G ensures correct specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers, rental operators, small-engine technicians, and homeowners who rely on chainsaws, string trimmers, blowers or other 2-stroke air-cooled equipment and want a factory-formulated semi-synthetic oil that improves cleanliness, reduces smoke and increases fuel stability. It’s suitable for anyone seeking OEM-replacement performance in a convenient bulk format for frequent use or multi-operator crews.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil safe for all 2-stroke air-cooled engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Power Blend GOLD is certified for use in most air-cooled 2-stroke outdoor equipment and meets ISO-L-EGD and JASO M345\/FD standards.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mix ratio should I use with these 5.2 oz bottles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your engine maker’s specified gas-to-oil ratio; the 5.2 oz bottle size is designed for easy measurement for common mix ratios.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54208309985464,"sku":"B07DM3QBBZ","price":350.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-power-blend-gold-front-packaging_40657dd4-5b94-4f2b-aa89-223eebd8a920.jpg?v=1790661448"},{"product_id":"echo-2-cycle-oil-24-pack-12-8-oz-bottles-for-5-gallon-mix-semi-synthetic-power-blend","title":"ECHO 2-Cycle Oil 24-Pack — 12.8 oz Bottles for 5-Gallon Mix, Semi-Synthetic Power Blend","description":"\u003cstrong\u003eECHO Power Blend XTended Life 2-cycle oil in 12.8 oz bottles is a semi-synthetic, OEM-formulated lubricant designed to mix easily with five gallons of gasoline for reliable performance in air-cooled 2-stroke outdoor power equipment.\u003c\/strong\u003e\n\n\u003cp\u003eThis 24-pack contains factory-made ECHO 12.8 oz bottles (OEM# 6450005) of Power Blend XTended Life oil, engineered as a universal 2-stroke formula. Developed specifically for ECHO equipment but certified for broad compatibility, it meets and exceeds ISO-L-EGD and JASO M345\/FD specifications. The semi-synthetic composition balances long-lasting protection with reduced smoke, while built-in stabilizers help preserve mixed fuel for longer storage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil protect and clean two-stroke engines?\u003c\/h3\u003e\n\u003cp\u003eThe Power Blend formula includes detergents and dispersants that help keep combustion chambers and ports cleaner than conventional oils. Cleaner components reduce carbon buildup, which in turn helps maintain peak power and throttle response over time. Corrosion inhibitors and anti-wear additives protect internal surfaces against rust and mechanical wear during operation and storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDetergent package reduces carbon deposits\u003c\/li\u003e\n  \u003cli\u003eAnti-wear agents protect piston rings and bearings\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors guard metal during downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance standards and compatibility does it meet?\u003c\/h3\u003e\n\u003cp\u003eECHO Power Blend XTended Life is certified to meet ISO-L-EGD and JASO M345\/FD requirements, ensuring compatibility with a wide range of air-cooled 2-stroke engines used in outdoor power tools. Although manufactured exclusively for ECHO, the oil’s universal specification makes it suitable for many makes and models that call for ISO or JASO-rated 2-cycle lubricants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets ISO-L-EGD specification\u003c\/li\u003e\n  \u003cli\u003eComplies with JASO M345\/FD performance class\u003c\/li\u003e\n  \u003cli\u003eSuitable for most air-cooled 2-stroke outdoor engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the packaging and sizing help with fuel mixing and storage?\u003c\/h3\u003e\n\u003cp\u003eEach 12.8 oz bottle is sized to simplify precise mixing for a five-gallon fuel blend at common oil-to-gas ratios. The 24-pack layout is ideal for commercial users, contractors, or households with multiple tools, reducing trips to reorder. Additionally, the formula contains a stabilizing component intended to extend the usable life of mixed fuel compared with untreated blends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12.8 oz bottle quantity tailored for standard 5-gallon mixes\u003c\/li\u003e\n  \u003cli\u003e24 bottles provide extended supply for heavy use\u003c\/li\u003e\n  \u003cli\u003eBuilt-in stabilizer helps preserve mixed fuel quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil reduce smoke and exhaust deposits?\u003c\/h3\u003e\n\u003cp\u003eThe semi-synthetic blend is formulated for lower smoke output compared with many conventional two-stroke oils, helping visibility and reducing visible emissions. Its cleaner-burning characteristics also minimize exhaust port and spark arrestor fouling, which supports easier maintenance and consistent exhaust flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-synthetic base for reduced visible smoke\u003c\/li\u003e\n  \u003cli\u003eFormulation minimizes exhaust port blockage\u003c\/li\u003e\n  \u003cli\u003eHelps keep spark arrestors and mufflers cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ECHO Power Blend XTended Life 12.8 oz bottles in the 24-pack are ideal for professional landscapers, rental fleets, and serious homeowners who run multiple 2-stroke tools and want a reliable, OEM-sourced oil supply. If you need an oil that meets industry standards, simplifies five-gallon mixing, and helps keep engines cleaner with lower smoke, this product provides a cost-effective, ready-to-use solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil suitable for all 2-stroke outdoor equipment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this semi-synthetic oil meets ISO-L-EGD and JASO M345\/FD, making it compatible with most air-cooled 2-stroke outdoor engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many bottles do I need to mix five gallons of fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 12.8 oz bottle is sized to mix accurately with a five-gallon tank at common 2-stroke ratios.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54208315097272,"sku":"B07DNHZHS9","price":377.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-12-8oz-front-label.jpg?v=1790661519"},{"product_id":"ruma-starter-motor-951-12207-for-powermore-4p90-engines-12v-14-tooth-oem-fit","title":"Ruma Starter Motor 951-12207 for Powermore 4P90 Engines — 12V 14‑Tooth OEM‑Fit","description":"\u003cp\u003e\u003cstrong\u003eRuma 951-12207 is a direct-fit 12V electric starter motor designed to replace MTD\/Craftsman\/Troy-Bilt 751P12207A and compatible starters for Powermore 4P90 series 420cc and selected 452cc engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower or small tractor uses an MTD Powermore 4P90-series engine and the original starter has failed, this Ruma replacement starter offers OEM-style fit and function. It is built with 14 teeth and 12 volts, engineered to match the bolt pattern, pin locations and drive gear found on many MTD, Troy-Bilt, Craftsman, Cub Cadet, Huskee and Yard Machines models. Before ordering, verify the engine code and brand — this unit is specifically for Powermore 4P90\/8P92 engines and will not fit machines powered by Briggs \u0026amp; Stratton or Kohler engines even if the mower model numbers look similar.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower engines and models will this starter actually fit?\u003c\/h3\u003e\n\u003cp\u003eThis starter is compatible with a long list of 4P90 and selected 8P92 Powermore engines used across several brands. It fits many riding tractors, mini riders and walk-behinds that list 4P90-series engines in their specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Powermore 4P90JUA\/JUB\/JU\/JUC\/JUE\/JUF and 4P90M0\/MU\/MUA\/MUB\/MUC\/MUD families (420cc).\u003c\/li\u003e\n  \u003cli\u003eSupports select 4P90HU\/HUA\/HUB\/HUC\/HUD and 8P92ZU\/8P92ZUA (452cc) engines.\u003c\/li\u003e\n  \u003cli\u003eCompatible brand examples: MTD, Craftsman, Troy-Bilt, Cub Cadet, Huskee, Yard Machines, Yard Man.\u003c\/li\u003e\n  \u003cli\u003eCommon mower series: LT1500, LT3800, LT4200, T1000\/T1200, R1000\/RER1000, TB30\/TB42, CC30, CC760ES, CR30, CLT38G\/CLT42G and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Ruma starter compare to the original OEM unit?\u003c\/h3\u003e\n\u003cp\u003eRuma's 951-12207 starter is produced to mirror OEM dimensions and electrical specs so it installs and operates like the factory part. Expect the same mounting points, pin locations, 14-tooth drive gear and 12V electrical compatibility for a straightforward swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style bolt pattern and dowel pin alignment for direct replacement.\u003c\/li\u003e\n  \u003cli\u003e12 volts with 14-tooth pinion to match original starter engagement.\u003c\/li\u003e\n  \u003cli\u003eManufactured for consistent cranking and to fit the same housings as MTD 951-12207\/751P12207A.\u003c\/li\u003e\n  \u003cli\u003eNote: Not compatible with non-Powermore engines (e.g., Kohler, Briggs \u0026amp; Stratton).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and parts are included with this starter?\u003c\/h3\u003e\n\u003cp\u003eThe package ships as a ready-to-install kit with the small parts often needed during replacement. That reduces trips to the hardware store and helps ensure proper alignment and mounting when you install the starter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne Ruma 951-12207 starter motor (12V, 14 teeth).\u003c\/li\u003e\n  \u003cli\u003eTwo mounting bolts and two dowel pins for precise positioning.\u003c\/li\u003e\n  \u003cli\u003eOne replacement spark plug supplied for routine engine maintenance.\u003c\/li\u003e\n  \u003cli\u003eCompatible with replacement numbers including 751-12207, 751P12207A and 75112207.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to avoid a fitment mistake?\u003c\/h3\u003e\n\u003cp\u003eBecause many mower models share chassis numbers but use different engines, confirming engine model and code is crucial. Measure electrical connection types and count starter teeth if unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm the engine label lists a 4P90 or supported 8P92 Powermore engine code.\u003c\/li\u003e\n  \u003cli\u003eVerify your original starter has a 14-tooth drive and 12V rating.\u003c\/li\u003e\n  \u003cli\u003eDo not order for Kohler or Briggs \u0026amp; Stratton powered machines even with matching mower model numbers.\u003c\/li\u003e\n  \u003cli\u003eCompare mounting bolt pattern and dowel pin locations where possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Ruma 951-12207 replacement starter is for DIY homeowners and independent repair shops repairing MTD-family lawn tractors, riding mowers and walk-behind mowers that use Powermore 4P90 (420cc) or selected 8P92 (452cc) engines. It’s intended for anyone who needs an affordable, OEM-style starter swap that comes with the essential mounting hardware and a spare spark plug to complete the job without delays. If your machine is powered by a non-Powermore engine, select a starter matched to that engine manufacturer instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my Craftsman mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Craftsman uses a Powermore 4P90 or compatible 8P92 engine and the original starter is 12V with 14 teeth. Verify the engine code first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include all parts to install the starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes the starter plus two mounting bolts, two dowel pins and one replacement spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ruma","offers":[{"title":"Default Title","offer_id":54208316735672,"sku":"B09H4RNHTQ","price":156.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ruma-starter-front-view.jpg?v=1790661552"},{"product_id":"echo-red-armor-2-cycle-oil-24-pack-6-4-oz-50-1-mix-jaso-fd-iso-l-egd-fuel-stabilizing-oem-6550025","title":"ECHO Red Armor 2-Cycle Oil 24-Pack (6.4 oz) — 50:1 Mix, JASO FD\/ISO L-EGD, Fuel-Stabilizing OEM 6550025","description":"\u003cstrong\u003eECHO Red Armor 2‑Cycle Oil (OEM 6550025) is a high-performance lubricant formulated for air-cooled 2‑stroke and hybrid engines, sold as a 24-pack of 6.4 oz bottles for reliable 50:1 fuel mixing and stabilized storage.\u003c\/strong\u003e\n\n\u003cp\u003eThis OEM ECHO Red Armor formula combines detergency, film strength and fuel stabilization to help keep small engines running smoothly. Engineered to meet JASO FD and ISO L‑EGD specifications, the oil is intended for modern outdoor power equipment that calls for a premium 2‑cycle lubricant and a 50:1 mix ratio. The concentrated packaging—24 bottles of 6.4 oz—matches routine maintenance needs for professionals and serious homeowners who run multiple machines or maintain a fleet.\u003c\/p\u003e\n\n\u003ch3\u003eHow does ECHO Red Armor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eRed Armor contains powerful detergents that help clean existing carbon and combustion deposits while maintaining a lubricating film to protect moving parts. That cleaning action helps engines maintain smoother operation and reduces the risk of deposit-related problems over time, without compromising lubrication properties.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDetergent additives that help dissolve carbon buildup\u003c\/li\u003e\n  \u003cli\u003eConsistent film strength to protect pistons and bearings\u003c\/li\u003e\n  \u003cli\u003eFormulated for both 2‑stroke and hybrid 2\/4‑stroke air‑cooled engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this oil work with my equipment and the 50:1 mix I use?\u003c\/h3\u003e\n\u003cp\u003eECHO Red Armor is recommended for all air‑cooled 2‑stroke and 2\/4‑stroke (hybrid) engines and is suitable where a 50:1 fuel-to-oil ratio is specified. Check your equipment owner’s manual for the manufacturer’s required ratio and oil specification; when 50:1 and JASO FD\/ISO L‑EGD compliance are needed, this oil matches those standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM part number 6550025 for easy cross-reference\u003c\/li\u003e\n  \u003cli\u003eDesigned for 50:1 mixing with gasoline for most modern handheld power tools\u003c\/li\u003e\n  \u003cli\u003eMeets JASO FD and ISO L‑EGD performance classes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I store fuel treated with this oil?\u003c\/h3\u003e\n\u003cp\u003eWhen added to fresh fuel, the formulation helps stabilize the mixture, extending usable shelf life compared with untreated gasoline. ECHO states the treated fuel can remain usable for up to two years under proper storage conditions, making it convenient for seasonal equipment or spare fuel reserves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStabilizes fresh fuel when mixed at the correct ratio\u003c\/li\u003e\n  \u003cli\u003eReduces the rate of fuel degradation and varnish formation\u003c\/li\u003e\n  \u003cli\u003eStore in approved containers away from heat and direct sunlight for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and packing details?\u003c\/h3\u003e\n\u003cp\u003eThis offering is a 24-pack of 6.4 oz bottles of ECHO Red Armor, OEM part number 6550025. The product is formulated as a 2‑cycle oil for mixing with gasoline at 50:1 and carries JASO FD and ISO L‑EGD ratings for performance verification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePack: 24 bottles, 6.4 oz each—convenient single‑use sizes\u003c\/li\u003e\n  \u003cli\u003eMix ratio: 50:1 for recommended engines\u003c\/li\u003e\n  \u003cli\u003eIndustry approvals: JASO FD, ISO L‑EGD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ECHO Red Armor 24PK is aimed at professionals, landscapers and homeowners who maintain multiple pieces of outdoor power equipment—string trimmers, blowers, chainsaws and hybrid 2\/4‑stroke tools—that require a reliable 50:1 2‑cycle oil. If you value OEM‑grade lubricants, want a detergent‑rich formula to combat deposits and prefer premeasured small bottles for accurate mixing and reduced waste, this package suits frequent users, rental shops and service technicians. Always follow your equipment manufacturer's recommendations for mixture ratio and oil type.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is ECHO Red Armor compatible with all 2‑stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s recommended for air‑cooled 2‑stroke and 2\/4‑stroke hybrid engines; confirm your equipment manual for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fuel-to-oil ratio should I use with this oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 50:1 gasoline-to-oil mix unless your equipment specifies a different ratio.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ECHO","offers":[{"title":"Default Title","offer_id":54208406454456,"sku":"B07DP6F9CS","price":269.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/echo-red-armor-front-packaging_beb6e51b-d75d-4fc1-a49f-3d45ee8f4a2a.jpg?v=1790662899"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/echo-red-armor-front-packaging_07c7570e-e182-4b02-af3a-6d3211e11ffa.jpg?v=1790679781","url":"https:\/\/canadianlawn.ca\/collections\/small-engine-oil.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}