{"title":"Savior","description":"\u003cp\u003eBrowse 27 Savior products at Canadian Lawn, including chainsaw chains, bars \u0026amp; oil and string trimmer parts \u0026amp; heads. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"savior-srm-225-replacement-air-filter-12-pack-echo-a226001410-direct-fit-2-5-8-size","title":"Savior SRM 225 Replacement Air Filter 12-Pack — Echo A226001410 Direct-Fit, 2-5\/8\" Size","description":"\u003cp\u003e\u003cstrong\u003eThe Savior SRM 225 replacement air filter is a direct-fit aftermarket swap for Echo A226001410 (130310-54130) designed to restore airflow and protect the engine on compatible trimmers and blowers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a small-engine machine loses performance, a clogged or damaged air filter is often the cause. This 12-piece pack from Savior is sized and drilled to match the Echo OEM part number A226001410 and several related Echo\/Oregon references, making it a practical maintenance item to keep on hand for garden pros and homeowners. The filters are intended to fit multiple Echo models including SRM, GT, HC, PE, PAS and PB series – verify your engine model and part number before ordering to ensure a correct match.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this Savior filter fit?\u003c\/h3\u003e\n\u003cp\u003eThe Savior SRM 225 replacement filter is manufactured to the Echo OEM dimensions and hole location used on many string trimmers, blowers and hedge trimmers. It’s compatible with a wide range of Echo models across SRM, GT, HC, PE, PAS and PB families, plus several larger kit numbers listed by Oregon.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect Echo fit: SRM-210 \/ SRM-225 \/ SRM-230 and related SRM-series machines\u003c\/li\u003e\n  \u003cli\u003eTrimmers and blowers: GT-200, GT-225, PB-250, PE-series edgers and more\u003c\/li\u003e\n  \u003cli\u003eHedge trimmers and pole pruners in the HC and PPF families\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references: Oregon 30-119 and 102-565 part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these replacement filters?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic outdoor-tool maintenance. Remove the airbox cover, take out the old filter, place the Savior filter aligning the 1\/4\" hole and the outer flange, then reassemble the cover. No special tools are normally required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn engine off and cool before starting work\u003c\/li\u003e\n  \u003cli\u003eRemove airbox cover screws or clips, depending on model\u003c\/li\u003e\n  \u003cli\u003eSwap the old filter for the Savior unit, aligning the 1\/4\" hole\u003c\/li\u003e\n  \u003cli\u003eReinstall cover and test-run the engine for correct idle and throttle response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the size and pack details of this replacement part?\u003c\/h3\u003e\n\u003cp\u003eEach filter measures approximately 2-5\/8\" by 2-5\/8\" with a 1\/4\" center hole, matching the Echo OEM size for direct replacement. Savior ships this item as a 12-piece package so you get multiple spares for seasonal servicing or fleet maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFilter dimensions: 2-5\/8\" x 2-5\/8\" with 1\/4\" hole\u003c\/li\u003e\n  \u003cli\u003ePack quantity: 12 filters per order\u003c\/li\u003e\n  \u003cli\u003eReference numbers: Echo A226001410, 130310-54130, Oregon 30-119, 102-565\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these filters affect engine performance or warranty?\u003c\/h3\u003e\n\u003cp\u003eThese are aftermarket replacement filters intended to match OEM fit and function; they should restore normal airflow and reduce dirt ingestion when installed correctly. Using an aftermarket part may affect warranty coverage depending on the original equipment manufacturer’s policies—check your warranty terms or consult the manufacturer if this is a concern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match Echo OEM dimensions and hole placement\u003c\/li\u003e\n  \u003cli\u003eRestores airflow when replacing clogged or damaged filters\u003c\/li\u003e\n  \u003cli\u003eConfirm warranty implications with Echo or your dealer before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Landscapers, rental yards, small-engine repair shops and homeowners who service multiple Echo or compatible machines will find this 12-pack cost-effective. It’s especially useful for anyone who wants to keep a supply of correctly sized replacement filters for seasonal maintenance or to minimize downtime on the job.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Savior filter an exact replacement for Echo A226001410?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It matches the Echo A226001410 (130310-54130) dimensions and hole placement for direct replacement on listed models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many filters are included and what size are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pack contains 12 filters, each measuring about 2-5\/8\" x 2-5\/8\" with a 1\/4\" center hole.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54193254760632,"sku":"B07MV8PN83","price":46.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-srm-225-front-packaging.jpg?v=1790560207"},{"product_id":"savior-carburetor-for-shindaiwa-t230-c230-x230-direct-fit-walbro-wyl-19-replacement-single-unit","title":"Savior Carburetor for Shindaiwa T230\/C230\/X230 — Direct-fit Walbro WYL-19 Replacement, Single Unit","description":"\u003cp\u003e\u003cstrong\u003eThe Savior carburetor is a direct-fit replacement for Shindaiwa T230\/C230\/X230-series trimmers, restoring reliable fuel delivery and consistent engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Shindaiwa trimmer is running rough, hard to start, or stalling at idle, a worn or clogged carburetor can be the culprit. This Savior unit matches the Walbro WYL-19\/Shindaiwa A021002190 specification and ships as a single, ready-to-install component. It fits T230-series machines (including many LE230, PB230, TCX230, X230, F230 and T230X variants noted for serial numbers 2000303 and up) so you can get back to trimming without hunting for proprietary parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this Savior carburetor fit my Shindaiwa model?\u003c\/h3\u003e\n\u003cp\u003eYes — the carburetor is engineered to replace Walbro WYL-19 and Shindaiwa A021002190 parts. Confirm fit by comparing part numbers and model years before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Shindaiwa T230, C230, X230, and related models listed in specs.\u003c\/li\u003e\n  \u003cli\u003eFits units with serial ranges noted (e.g., 2000303 and up for T230\/T230X).\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers WYL-19, A021002190, and 20016-81021.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the replacement carburetor?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance. Typical steps include removing the air filter, disconnecting throttle and choke linkages, swapping the carburetor, and reattaching lines and gaskets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits existing mounting points; no major modifications required.\u003c\/li\u003e\n  \u003cli\u003eUse original gaskets and clamps or replace them during installation.\u003c\/li\u003e\n  \u003cli\u003eFollow the engine’s service manual for correct adjustment and safety steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance changes should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing a faulty carburetor restores smooth idling, consistent throttle response, and easier starting. You should see fewer stalls, reduced flooding, and more reliable power under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother idle and steadier revs when cutting or trimming.\u003c\/li\u003e\n  \u003cli\u003eImproved cold starts and quicker throttle recovery.\u003c\/li\u003e\n  \u003cli\u003eReduced fuel leakage and dripping compared with worn units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I get in the package, and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eThe shipment contains one Savior\/Shindaiwa T230 replacement carburetor. Before purchasing, verify your engine part number and inspect fuel lines, gaskets, and mounting hardware to avoid installation delays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 replacement carburetor (no extra gaskets unless specified).\u003c\/li\u003e\n  \u003cli\u003eVerify model and part numbers: WYL-19, A021002190, 20016-81021, or matching OEM references.\u003c\/li\u003e\n  \u003cli\u003eRecommended: fresh gaskets and clamp hardware for best seal and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior carburetor is aimed at owners and repair technicians of Shindaiwa T230-series trimmers and related models who need a reliable, OEM-compatible replacement. It's appropriate for DIY small-engine repairers, lawncare professionals maintaining a fleet of Shindaiwa equipment, and anyone who wants a like-for-like part to restore proper fuel metering and performance. Always confirm your machine’s model and part number before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit Shindaiwa T230X models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits T230X models with serials 2000303 and up—confirm your engine part number first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are gaskets and clamps included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package contains one carburetor; gaskets and clamps are usually not included—replace them if worn.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54193271046328,"sku":"B077P3QW43","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-carburetor-front-view.jpg?v=1790560344"},{"product_id":"savior-carburetor-kit-for-echo-srm-225-gt225-pas225-pe225-rb-k93-pre-adjusted-replacement-with-gaskets-fuel-line","title":"Savior Carburetor Kit for Echo SRM-225 GT225 PAS225 PE225 – RB-K93 Pre‑Adjusted Replacement with Gaskets \u0026 Fuel Line","description":"\u003cp\u003e\u003cstrong\u003eThe Savior RB-K93 Carburetor Kit is a complete, pre-adjusted replacement designed to restore reliable starting and smooth idling to Echo SRM-225 series trimmers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Echo SRM-225, GT225, PAS225 or PE225 string trimmer is hard to start, stalls under load, or surges during cutting, the carburetor is often the culprit. The Savior RB-K93 kit matches OEM fit and function for models using the RB-K93 \/ A021001690 \/ A021001691 \/ A021001692 parts, and arrives with every part you need for a full tune-up in one box.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this carburetor improve my trimmer's starting and idle?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or gummed carburetor restores the correct fuel-air balance so the engine lights quickly and runs steadily at idle and under load. This pre-set Savior unit avoids lengthy bench tuning while solving common symptoms like backfiring and stalling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-adjusted at the factory to match OEM idle and mixture characteristics.\u003c\/li\u003e\n  \u003cli\u003eRestores consistent fuel delivery for easier cold starts.\u003c\/li\u003e\n  \u003cli\u003eReduces surging and sputtering when cutting dense grass or brush.\u003c\/li\u003e\n  \u003cli\u003eIncludes gaskets and fuel line to ensure airtight sealing and flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts come in the complete tune-up kit?\u003c\/h3\u003e\n\u003cp\u003eRather than buying components separately, the Savior RB-K93 kit bundles the carburetor with essential replacement parts so you can finish the repair in one session. That saves time and avoids mismatched parts that cause leaks or poor performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne RB-K93 replacement carburetor pre-adjusted for Echo 21.2cc two-stroke engines.\u003c\/li\u003e\n  \u003cli\u003eOne replacement air filter to restore clean airflow and engine protection.\u003c\/li\u003e\n  \u003cli\u003eFuel line kit and two gaskets for leak-free connections.\u003c\/li\u003e\n  \u003cli\u003eOne spark plug to complete the ignition side of the tune-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and does it require special tuning?\u003c\/h3\u003e\n\u003cp\u003eThe Savior carburetor is a direct-fit replacement engineered to the OEM dimensions and mounting points, so installation is straightforward for users with basic hand tools. Because it ships pre-adjusted, most installations only require bolt-on mounting and reconnection of the fuel and throttle linkages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolts onto Echo SRM-225 series without modifying the engine or frame.\u003c\/li\u003e\n  \u003cli\u003eNo specialized carburetor tools required for most installs.\u003c\/li\u003e\n  \u003cli\u003ePre-set mixture minimizes need for high\/low speed adjustments after fitting.\u003c\/li\u003e\n  \u003cli\u003eIncludes replacement gaskets and fuel line for a clean installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Echo models and years are compatible with this RB-K93?\u003c\/h3\u003e\n\u003cp\u003eThis replacement targets the 21.2cc Echo two-stroke trimmers that originally used the RB-K93 or OEM numbers listed. It covers many SRM and GT models produced from 2007 onward, but always confirm your OEM carburetor part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Echo SRM225, SRM225i, SRM225SB, SRM225U models.\u003c\/li\u003e\n  \u003cli\u003eAlso fits GT225, GT225i, GT225L, PAS225, PE225, PPF225, SHC225 where RB-K93 is listed.\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM numbers A021001690, A021001691, A021001692.\u003c\/li\u003e\n  \u003cli\u003eDesigned for the 21.2cc two-stroke Echo engine platform (2007–2025 models).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Savior RB-K93 Carburetor Kit is aimed at homeowners, landscapers, and small-engine technicians who need a reliable, OEM-compatible replacement without the hassle of sourcing multiple parts. It's ideal if your Echo trimmer struggles to start, idles poorly, or stalls under load and you want a single kit that includes the carburetor, air filter, spark plug, fuel line, and gaskets for a fast, professional-feeling repair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Echo SRM-225 model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your trimmer uses RB-K93 or OEM A021001690\/A021001691\/A021001692. Verify the part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes the carburetor, air filter, fuel line, spark plug, and two gaskets for a full tune-up.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54193274618040,"sku":"B06Y4KJ4GS","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-carburetor-front-view_f6177539-119f-4ab3-a921-90e954bbf262.jpg?v=1790560427"},{"product_id":"savior-poulan-chainsaw-carburetor-1950-2155-replacement-with-tune-up-kit-gaskets-primer","title":"Savior Poulan Chainsaw Carburetor 1950–2155 Replacement with Tune-Up Kit (Gaskets \u0026 Primer)","description":"\u003cstrong\u003eReplacement carburetor and tune-up kit engineered to restore fuel delivery and starting reliability for multiple Poulan and compatible small-engine chainsaws.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Poulan or compatible saw is hard to start, stalls under load, or runs unevenly, a worn or clogged carburetor is often the cause. This Savior carburetor assembly is a direct-fit aftermarket unit that replaces several OEM part numbers and ships with a small tune-up kit—gaskets, primer bulb, fuel lines, filter, spark plug, and air filter—so you can swap the part and inspect related fuel components in one service session.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and OEM numbers does this carburetor replace?\u003c\/h3\u003e\n\u003cp\u003eThis unit is designed to interchange with many Poulan and universal two-stroke saw carburetors. It lists numerous OEM references and fits a broad range of Poulan, Predator, and PP-series models as well as Zama and Walbro equivalents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 545081885, 530069703, 30071820, 530071821, 530071618, 530071620, 545006057, 545006058, 530035343, 530071603.\u003c\/li\u003e\n  \u003cli\u003eCompatible Poulan models: 222, 262, 1900, 1950, 1975, 2050WT, 2055, 2075, 2150 Wild Thing, 2150LE and more.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Predators and PP series: 2155, 2175, 2250, 2350, 2450, 2550, PP220, PP221LE, PP260, PP260LE.\u003c\/li\u003e\n  \u003cli\u003eWorks with Zama and Walbro equivalents: C1Q-W8, C1Q-W14, WT-324, W-20, WT-391, WT-600, WT-624, WT-625, WT-637 and others.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the kit and why those parts matter?\u003c\/h3\u003e\n\u003cp\u003eThe carburetor comes with several consumables to make the replacement step efficient and reliable. Replacing these small parts at the same time reduces the chance of a second visit and helps ensure correct fuel delivery and ignition after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 carburetor assembly built to the specified flange and throttle linkage pattern.\u003c\/li\u003e\n  \u003cli\u003e2 gaskets to ensure airtight seals at the manifold and carburetor base.\u003c\/li\u003e\n  \u003cli\u003e1 primer bulb to restore reliable fuel priming for cold starts.\u003c\/li\u003e\n  \u003cli\u003e2 fuel lines (6616 and 6617), plus 1 inline fuel filter to prevent debris from entering the carburetor.\u003c\/li\u003e\n  \u003cli\u003e1 spark plug and 1 air filter so ignition and air filtration are checked during the tune-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance, but verify model fit before starting. You’ll remove the old carburetor, transfer any linkages and brackets if needed, fit the supplied gaskets, and reconnect fuel and primer lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: socket or nut drivers, flathead screwdriver, needle-nose pliers, and a small wrench for the spark plug.\u003c\/li\u003e\n  \u003cli\u003eAllow 30–60 minutes for a first-time replacement, less if you’ve done similar work before.\u003c\/li\u003e\n  \u003cli\u003eAfter installation, use the saw’s idle and mixture screws to fine-tune performance per manufacturer specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this carburetor improve starting and running performance?\u003c\/h3\u003e\n\u003cp\u003eA fresh carburetor and new fuel components often restore consistent starting, reduce stalling, and smooth throttle response when the original unit is worn or clogged. Final performance depends on correct installation, proper tuning, and overall engine condition.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates common choke and flooding issues caused by deteriorated primer bulbs or fuel lines.\u003c\/li\u003e\n  \u003cli\u003eNew gaskets and filter reduce air leaks and debris-related running problems.\u003c\/li\u003e\n  \u003cli\u003eTuning the idle and mixture screws after installation yields best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior carburetor kit is aimed at DIYers, small-engine mechanics, landscapers, and homeowners who maintain Poulan, Predator, or compatible chainsaws and want a complete, cost-effective replacement rather than sourcing multiple parts. If you need to restore dependable starting and throttle response without buying a new saw, this kit gives the core parts required for a proper tune-up and swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit my Poulan 2150 Wild Thing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit lists compatibility with the 2150 Wild Thing and many other Poulan models; verify part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included fuel lines and primer bulb new?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes new primer bulb, two fuel line pieces, and an inline fuel filter for a complete tune-up.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54193360994488,"sku":"B06XPGGK5B","price":50.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-carburator-front-assembly.jpg?v=1790561558"},{"product_id":"savior-carburetor-for-bolens-trimmers-753-06190-direct-fit-replacement-for-bl110-bl160-bl125-restores-starting-idle","title":"Savior Carburetor for Bolens Trimmers 753-06190 — Direct-Fit Replacement for BL110 BL160 BL125, Restores Starting \u0026 Idle","description":"\u003cstrong\u003eThe Savior 753-06190 carburetor is a direct-fit replacement designed to restore fuel delivery and reliable starting for Bolens BL110\/BL160 and many compatible Troy-Bilt, MTD, and Craftsman trimmers.\u003c\/strong\u003e\n\n\u003cp\u003eIf your string trimmer or small tiller is sputtering, hard to start, or idles poorly, a worn or clogged carburetor is often the cause. The Savior 753-06190 swaps into a wide range of consumer gas trimmers and small garden machines as a practical repair part. It replaces multiple OEM numbers and supports several engine models, making it a versatile option for home lawn-care gear repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and part numbers will this carburetor work with?\u003c\/h3\u003e\n\u003cp\u003eThe Savior 753-06190 matches many OEM references and fits numerous trimmer and tiller models from Bolens, Troy-Bilt, Murray, Remington, Yard-Man, Cub Cadet and Craftsman. Always check the part numbers stamped on your old carburetor or the engine model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 753-06190, 751-14840, 951-14840, 753-06423, WT-973, WT-973-1, WT-1116\u003c\/li\u003e\n  \u003cli\u003eCommon fit: Bolens BL110, BL160, BL125, BL425 tiller\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt compatibility: TB2040XP, TB21EC, TB22, TB22EC, TB32EC, TB42BC, TB80EC\u003c\/li\u003e\n  \u003cli\u003eAlso fits many Sears\/Craftsman model carburetor references listed on product page\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this carburetor improve trimmer performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded carburetor restores correct air–fuel mixture and steady idle, which leads to easier starts, smoother throttle response, and more consistent cutting power. The Savior unit is built to match OEM flow paths and mounting points so throttle linkages and fuel lines align without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper idle and reduces stalling\u003c\/li\u003e\n  \u003cli\u003eImproves starting after choke and priming issues\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on design for straightforward installation\u003c\/li\u003e\n  \u003cli\u003ePreserves factory throttle and linkage geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing the carburetor?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility by comparing the part numbers and your engine model. Also inspect fuel lines, primer bulbs, gaskets and mounting studs; replacing a bad carb without addressing aged hoses or seals may only delay proper operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify old carburetor part number or engine model number\u003c\/li\u003e\n  \u003cli\u003eInspect and replace cracked fuel lines or primer bulbs as needed\u003c\/li\u003e\n  \u003cli\u003eUse new gaskets and mounting hardware for a leak-free fit\u003c\/li\u003e\n  \u003cli\u003eClean surrounding mounting surfaces before installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a basic small-engine repair. Most home mechanics can complete the swap with common hand tools in 30–60 minutes, depending on model access. Keep fuel drained or clamped off and work in a ventilated area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: screwdrivers, socket set, pliers and gasket scraper\u003c\/li\u003e\n  \u003cli\u003eSuggested supplies: replacement gasket, small fuel clamp, thread locker if specified\u003c\/li\u003e\n  \u003cli\u003eTip: photograph linkages before removal to ease reassembly\u003c\/li\u003e\n  \u003cli\u003ePrime and test according to engine manufacturer guidelines after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Savior 753-06190 carburetor is aimed at homeowners, landscapers and small-engine repair shops who need a dependable replacement part for Bolens BL-series trimmers and many compatible Troy-Bilt, MTD, Remington, Murray, Yard-Man and Craftsman machines. It suits anyone comfortable with basic small engine maintenance who wants to extend the life of a trimmer or tiller without buying a new machine. Remember to confirm fitment with your engine and replace worn fuel lines, primer bulbs or gaskets during the repair for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor replace part number 753-06190?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Savior 753-06190 replaces OEM references including 753-06190, 751-14840, 951-14840 and related numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this on a Bolens BL110 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Typical installation requires basic hand tools and about 30–60 minutes; verify model and replace gaskets and fuel lines if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54193676452024,"sku":"B06XPH3Z7Z","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-carburetor-front-view_b5076191-a0ad-4c5c-91cb-dbcacf55c2d8.jpg?v=1790564170"},{"product_id":"savior-carburetor-for-stihl-ms250-ms230-ms210-direct-replacement-1123-120-0605-complete-installation-kit","title":"Savior Carburetor for Stihl MS250 MS230 MS210 – Direct Replacement 1123-120-0605, Complete Installation Kit","description":"\u003cp\u003e\u003cstrong\u003eThe Savior MS250 carburetor is a direct replacement carburetor assembly that restores fuel delivery for Stihl MS250, MS230 and MS210 chainsaws compatible with part number 1123-120-0605.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl chainsaw is running rough, has hard starting, stalls under load, or leaks fuel, a worn or damaged carburetor is often the cause. This Savior aftermarket carburetor kit is designed to match the OEM mounting, throttle linkage, and fuel passages for many MS230, MS250 and MS210 saws, and it arrives with a full set of installation accessories to make the swap straightforward. Before ordering, compare the part numbers, screw locations and choke linkage on your current carburetor to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this carburetor improve saw performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded carburetor can restore crisp throttle response, steadier idling, and reliable acceleration under cut load. The Savior unit rebuilds the air–fuel metering system so the engine receives the proper mixture across operating ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent idling and reduces unexpected stalls\u003c\/li\u003e\n  \u003cli\u003eImproves throttle response and acceleration under load\u003c\/li\u003e\n  \u003cli\u003eReplaces worn gaskets and passages that cause leaks or flooding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Stihl MS250, MS230, or MS210 model?\u003c\/h3\u003e\n\u003cp\u003eThis carburetor is made to replace Stihl part 1123-120-0605 and equivalent Walbro models (WT-286, WT286, WT-215) used on many MS230 (2002–2012), MS250 (2002–current) and MS210 saws. Production year and small design variations mean you should visually confirm mounting screws and choke\/throttle lever locations before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Stihl part numbers 1123-120-0605 and listed Walbro equivalents\u003c\/li\u003e\n  \u003cli\u003eFits MS230 (2002–2012) and MS250 (2002–present); also used on some MS210 variants\u003c\/li\u003e\n  \u003cli\u003eCompare screw pattern and choke lever placement to your existing carburetor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the Savior carburetor kit and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the carburetor plus consumables so you avoid sourcing small parts: gasket, cleaner, fuel and oil filters, fuel lines, spark plug, and intake manifold. Installation requires basic hand tools and a few adjustments to idle and mixture screws; if you’re comfortable with small-engine maintenance, the swap is straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes carburetor, gasket, cleaner, 2 fuel lines, fuel filter, oil filter, spark plug, intake manifold\u003c\/li\u003e\n  \u003cli\u003eRequires basic tools and simple tuning of idle and mixture screws after fitment\u003c\/li\u003e\n  \u003cli\u003eSave time compared with rebuilding the old carburetor or sourcing separate parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I verify compatibility before ordering?\u003c\/h3\u003e\n\u003cp\u003eBecause Stihl used different carburetor variants across production years, visually check the replacement against your installed unit. Confirm screw hole spacing, choke and throttle lever orientation, and part numbers stamped on the old housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch your current carburetor’s mounting screw pattern and choke lever position\u003c\/li\u003e\n  \u003cli\u003eConfirm existing part numbers or cross-reference Walbro equivalents if present\u003c\/li\u003e\n  \u003cli\u003eContact support with photos if you need confirmation before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Savior MS250 carburetor kit is intended for homeowners, arborists, and professional users who own compatible Stihl MS230, MS250 or MS210 chainsaws that exhibit poor fuel delivery, hard starting, or fuel leakage. It’s a cost-effective option for anyone who prefers replacing a complete carburetor and associated consumables over performing a time-consuming rebuild or waiting for OEM parts, provided they verify fitment against their saw’s existing carburetor.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace Stihl part 1123-120-0605?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this Savior carburetor is made to replace part number 1123-120-0605 and equivalent Walbro models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation parts included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes gasket, cleaner, two fuel lines, fuel filter, oil filter, spark plug, and intake manifold.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54193992106168,"sku":"B06XWHHGHH","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-carburetor-front-view_fa428e94-47aa-4366-9228-02d5b7be95df.jpg?v=1790568235"},{"product_id":"savior-10-inch-pole-saw-chain-3-pack-1-4-pitch-043-gauge-56-links-semi-chisel","title":"Savior 10-Inch Pole Saw Chain 3-Pack — 1\/4\" Pitch .043\" Gauge, 56 Links, Semi-Chisel","description":"\u003cp\u003e\u003cstrong\u003eSavior 3PC 10\" pole saw chain set replaces worn chains on Stihl-compatible 10\" guide bars, delivering precise semi-chisel cutting for pruning and light limb removal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pole saw needs a fresh cutting edge, this three-pack of 10\" chains from Savior fits many Stihl-style polesaw models and guide bars specified at 1\/4\" pitch and .043\" gauge. Each chain is semi-chisel, designed for efficient cutting with easier maintenance than full-chisel teeth, and the package includes storage bags and gloves for safe handling. Before ordering, confirm your bar’s length, pitch, gauge and drive link count to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and bars does this chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis chain is built for 10\" guide bars with 1\/4\"LP pitch, .043\" (1.1 mm) gauge and 56 drive links. It is compatible with specific part numbers like 71PMM3 56 and 3670-005-0056 and suits guide bar 3005 008 3403. It also fits a range of Stihl-style pole saw models and similar saws that use the same chain specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 10\" guide bars with 1\/4\"LP pitch and .043\" gauge\u003c\/li\u003e\n  \u003cli\u003eMatches 56 drive links and part numbers including 71PMM3 56\u003c\/li\u003e\n  \u003cli\u003eCompatible with MSA120 C-B, MSA160 C-B, MSA200 C-B and many HT and MS151 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does a semi-chisel chain impact pruning performance?\u003c\/h3\u003e\n\u003cp\u003eSemi-chisel cutters have rounded corners on the tooth that resist dulling in dirty or resinous wood better than full-chisel teeth. They stay sharper longer in general-use pruning and provide smoother, more controllable cuts for homeowners and landscapers. If you regularly cut clean, softwood, you’ll still get fast cuts; if you encounter dirt or knottovergrowth, the semi-chisel offers durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRounded tooth corners reduce rapid dulling in abrasive conditions\u003c\/li\u003e\n  \u003cli\u003eOffers a balance of cutting speed and prolonged edge life\u003c\/li\u003e\n  \u003cli\u003eEasier to sharpen for DIY maintenance compared with fine-pitch full-chisel chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how do I handle the chains safely?\u003c\/h3\u003e\n\u003cp\u003eThe package contains three 10\" saw chains, three individual storage bags, and one pair of XL gloves intended for handling—not cut-resistant protection. Stow each chain in its bag when not installed to protect the teeth and prevent accidental contact. Always follow your pole saw manufacturer’s safety instructions when installing or tensioning the chain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 3 chains, 3 storage bags and 1 pair of XL handling gloves\u003c\/li\u003e\n  \u003cli\u003eStore chains in bags to avoid dulling and accidental cuts\u003c\/li\u003e\n  \u003cli\u003eConfirm bar specs before installation; follow manufacturer torque and tension guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this chain matches my pole saw?\u003c\/h3\u003e\n\u003cp\u003eMeasure your guide bar or check the saw’s manual for pitch (.25\"\/1\/4\"LP), gauge (.043\"\/1.1 mm) and drive link count (56). Part numbers printed on the original chain or bar, such as 71PMM3 56 or 3005 008 3403, are a quick compatibility check. If your model can accept multiple bars, verify all four specs—length, pitch, gauge and drive links—before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the guide bar length and stamped part numbers for compatibility\u003c\/li\u003e\n  \u003cli\u003eConfirm 1\/4\"LP pitch, .043\" gauge and 56 drive links\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, compare the old chain’s markings or consult the saw manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior 3PC 10\" chain set is made for homeowners, arborists and landscapers who use Stihl-compatible 10\" pole saws and need quick, cost-effective replacement chains. It’s especially useful for users who prefer semi-chisel teeth for longer edge life in general pruning, want multiple spares for uninterrupted work, and appreciate included storage bags and handling gloves for safer maintenance routines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Stihl MSA 120 C-B?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your MSA 120 C-B uses a 10\" bar with 1\/4\" pitch, .043\" gauge and 56 drive links—confirm those specs first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the supplied XL gloves are for handling only and are not anti-cut protective gloves.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54195678806200,"sku":"B0DQ87C33C","price":57.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-10in-front-packaging.jpg?v=1790585006"},{"product_id":"savior-ignition-coil-for-husqvarna-trimmers-545046701-fits-124-125-128-series-direct-fit-replacement","title":"Savior Ignition Coil for Husqvarna Trimmers 545046701 — Fits 124\/125\/128 Series, Direct-Fit Replacement","description":"\u003cstrong\u003eSavior 545046701 is a direct-fit ignition coil replacement designed to restore spark performance on compatible Husqvarna small-engine trimmers and edgers.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Husqvarna trimmer has become hard to start or runs inconsistently, a worn or faulty ignition coil is a common cause. This Savior 545046701 (also referenced as 530039224 or 5450467-01) is built as a replacement module for a range of Husqvarna models—helping re-establish the high-voltage pulse needed for reliable ignition. Before ordering, verify the engine model and part number to ensure compatibility and avoid installation delays.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Husqvarna models will this ignition coil fit?\u003c\/h3\u003e\n\u003cp\u003eThis coil fits many Husqvarna 2-stroke trimmer models, including variants in the 124, 125, and 128 series. It covers both professional and consumer trims listed in the product data, with an important exclusion for older units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 124C, 124R, 124L; 125C, 125E, 125R, 125L, 125RJ, 125LDX;\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 128C, 128R, 128CD, 128LD, 128RJ, 128LDX;\u003c\/li\u003e\n  \u003cli\u003eNotes: Does not fit Husqvarna 125L models manufactured before year 2000; always confirm your engine model and part number before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will replacing the coil affect starting and running?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing ignition coil can return consistent spark timing and stronger ignition, which often translates to easier starting, smoother idle, and steadier throttle response. This part restores the electronic timing element that delivers the high-voltage pulse from the magneto to the spark plug.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves spark strength for more reliable ignition.\u003c\/li\u003e\n  \u003cli\u003eReduces misfires and rough idling caused by weak coils.\u003c\/li\u003e\n  \u003cli\u003eCan eliminate intermittent starting problems attributed to coil failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing this module?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility first by matching your engine’s model number and the OEM part numbers listed. Also inspect the mounting, flywheel clearance, and spark plug condition—these factors affect ignition performance and fitment during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-reference part numbers: 545046701, 5450467-01, 530039224, 5300392-24.\u003c\/li\u003e\n  \u003cli\u003eVerify engine model and manufacture year (125L pre-2000 excluded).\u003c\/li\u003e\n  \u003cli\u003eCheck flywheel gap, mounting studs, and plug wire condition for proper setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this a genuine Husqvarna part or an aftermarket alternative?\u003c\/h3\u003e\n\u003cp\u003eThe Savior 545046701 is an aftermarket replacement manufactured to match the fit and function of the referenced OEM coils. It is produced to meet the physical and electrical specifications required for the listed Husqvarna trimmer models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAftermarket option matching OEM mounting points and connections.\u003c\/li\u003e\n  \u003cli\u003eSupplied as a direct-replacement module for compatible engines.\u003c\/li\u003e\n  \u003cli\u003eAffordable alternative to OEM while maintaining required electrical output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement coil is intended for homeowners, landscapers, and small-engine technicians who own compatible Husqvarna trimmers and need a reliable aftermarket ignition module. It’s best suited for anyone comfortable with basic outdoor power-equipment maintenance—removing the cover, checking flywheel-to-coil gap, and mounting the new unit. If you’re unsure about compatibility or installation, have your model and part numbers on hand or consult a qualified service technician before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this coil fit my Husqvarna 125L trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Husqvarna 125L models made after 2000; do not use for pre-2000 125L. Verify your model and part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What OEM part numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Savior coil replaces 545046701, 5450467-01, 530039224 and 5300392-24 compatible OEM modules.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54198324330680,"sku":"B08MDTGKMB","price":60.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-ignition-coil-front-view.jpg?v=1790589544"},{"product_id":"savior-ms170-carburetor-replacement-kit-for-stihl-ms170-ms180-1130-120-0603-zama-compatible-with-tune-up-parts","title":"Savior MS170 Carburetor Replacement Kit for Stihl MS170 MS180 (1130 120 0603) — Zama-Compatible with Tune-Up Parts","description":"\u003cp\u003e\u003cstrong\u003eSavior MS170 carburetor replacement kit restores fuel delivery and reliable starting for Stihl MS170 and compatible MS180 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl chainsaw is stalling, hard to start, or idling poorly, a worn or mismatched carburetor and clogged small parts are often the cause. This Savior kit supplies a direct-fit Zama-compatible carburetor (part number 1130 120 0603 replacement) plus essential consumables so you can replace the component and refresh the fuel system yourself. Verify your saw’s model and part numbers before ordering to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this carburetor fits my Stihl saw?\u003c\/h3\u003e\n\u003cp\u003eFitment depends on the exact model and carburetor variant used in your saw. The Savior unit replaces Zama C1Q-S57 series and matches Stihl part 1130 120 0603; it is intended for many MS170 and MS180 configurations but not for MS170C or MS180C models that use 1130 120 0608.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Stihl MS170, MS180, and models labeled 017 or 018 when they use 1130 120 0603.\u003c\/li\u003e\n  \u003cli\u003eReplaces Zama C1Q-S57, C1Q-S57A, C1Q-S57B variants.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with saws requiring 1130 120 0608 or MS170C\/MS180C model carburetors.\u003c\/li\u003e\n  \u003cli\u003eAlways compare your current carburetor shape and screw positions to confirm match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and why those parts matter?\u003c\/h3\u003e\n\u003cp\u003eThis package is more than a carburetor: it includes filters, lines, a spark plug, and a cleaner so you can complete a basic tune-up while replacing the carburetor. Replacing small wear items at the same time helps prevent repeated returns and ensures the engine receives clean fuel and reliable spark after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Savior carburetor (Zama-compatible, part number equivalent 1130 120 0603).\u003c\/li\u003e\n  \u003cli\u003eFuel filter and oil filter replacements to remove debris and protect the carburetor.\u003c\/li\u003e\n  \u003cli\u003e2 fuel lines for secure connections and to replace brittle old tubing.\u003c\/li\u003e\n  \u003cli\u003e1 spark plug and 1 cleaner to refresh ignition and remove deposits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with small-engine maintenance. You’ll need basic hand tools, time to compare parts, and patience to adjust the carburetor idle and mixture screws after fitting. If you’re unsure, a local small-engine shop can install and tune the carburetor quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: screwdrivers, small socket set, pliers, and carburetor cleaner.\u003c\/li\u003e\n  \u003cli\u003ePlan for 30–90 minutes depending on experience and saw condition.\u003c\/li\u003e\n  \u003cli\u003eAdjust idle and mixture screws per Stihl guidance after installation.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, take the parts and saw to a certified technician to avoid damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior MS170 carburetor kit is designed for homeowners, landscapers, and maintenance technicians who own a Stihl MS170 or MS180 (017\/018) that uses the 1130 120 0603 carburetor variant and need a cost-effective, complete replacement solution. It’s ideal for users who want to perform a single-session tune-up—replacing the carburetor plus fuel and ignition consumables—to restore reliable starting and smoother idling. Verify your saw’s model and part numbers before purchase to ensure this kit matches your specific machine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor fit my MS170C or MS180C?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit matches part 1130 120 0603 and is not compatible with MS170C or MS180C models requiring 1130 120 0608.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to replace the carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes the carburetor, fuel and oil filters, two lines, a spark plug, and a cleaner for a complete basic service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54199078748344,"sku":"B00VTAD818","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-carburetor-front-view_ce26acc4-c824-4574-8f26-6c8be5723dd3.jpg?v=1790591751"},{"product_id":"savior-oil-filter-492932s-spin-on-replacement-for-briggs-stratton-kohler-kawasaki-fit-standard-gasket-direct-fit","title":"Savior oil filter 492932S — spin-on replacement for Briggs \u0026 Stratton, Kohler, Kawasaki fit (standard gasket, direct-fit)","description":"\u003cb\u003eSavior 492932S oil filter is a direct-fit replacement designed to protect small engine oil systems on many Briggs \u0026amp; Stratton, Kohler, Kawasaki and John Deere models.\u003c\/b\u003e\n\n\u003cp\u003eIf you service lawn tractors, zero-turn mowers, generators or other small engines, the right oil filter matters for clean oil flow and reliable operation. The Savior 492932S replaces multiple OEM part numbers (including 492932, 795890, 695396, 492932B and more) and lists compatibility across popular brands like Briggs \u0026amp; Stratton, Kohler, Kawasaki, Craftsman and John Deere. This product listing summarizes fit details, practical benefits, and common buyer questions so you can confirm fitment before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and part numbers does this filter fit?\u003c\/h3\u003e\n\u003cp\u003eThe Savior 492932S cross-references a long list of OEM part numbers and engine models. It is built to match the fit and function of several Briggs \u0026amp; Stratton oil filters and other equivalents from Kohler, Kawasaki, Tecumseh and multiple OEM lawn equipment models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Briggs part numbers: 492932S, 492932, 795890, 695396, 492932B, 492056, 696854, 842921 and others.\u003c\/li\u003e\n  \u003cli\u003eListed compatible OEMs: Kohler 25 050 01; Kawasaki 49065-7007\/49065-2077 variants; Tecumseh 36563; John Deere AM125424 and GY20577.\u003c\/li\u003e\n  \u003cli\u003eWorks in many Craftsman, Toro and John Deere mower models—check your equipment model list before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this is the right replacement for my machine?\u003c\/h3\u003e\n\u003cp\u003eAlways compare the part numbers on your old filter and consult your engine or equipment manual. Visual checks of thread size, gasket diameter and overall filter height help avoid fitment issues when ordering aftermarket replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the OEM number stamped on your existing filter with the Savior cross-list above.\u003c\/li\u003e\n  \u003cli\u003eMeasure thread pitch and gasket outer diameter if unsure—most retailers include spec details.\u003c\/li\u003e\n  \u003cli\u003eIf your engine is listed (e.g., John Deere D100 series or Kohler FX\/FS\/FR series), the filter is very likely compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and installation details should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe Savior 492932S is manufactured to provide consistent oil flow and filtration for routine maintenance intervals. Installation follows standard spin-on procedure used for small engines; hand-tighten to spec to ensure a proper seal without damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpin-on style with a gasket for a secure seal against oil leaks.\u003c\/li\u003e\n  \u003cli\u003eIntended for standard service intervals—replace according to your engine manufacturer’s oil change schedule.\u003c\/li\u003e\n  \u003cli\u003eInspect for proper seating and no leaks after first start-up following installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This oil filter suits homeowners, landscapers and small-engine service shops that maintain Briggs \u0026amp; Stratton, Kohler, Kawasaki and John Deere powered equipment. It’s aimed at buyers who need a reliable, cross-referenced replacement part to restore proper oil filtration without sourcing original-brand filters. Before ordering, verify your engine model and existing filter part number to confirm compatibility and avoid installation delays.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Savior 492932S compatible with my John Deere D110?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this filter cross-references John Deere models like D100 series; verify your current filter or engine manual part number before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this filter on Kawasaki FR600V engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It lists compatibility with many Kawasaki V-series models; confirm your engine’s part number (e.g., 49065-7007) to ensure match.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54199805411512,"sku":"B07H5LK5QR","price":73.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-492932s-front-view.jpg?v=1790600107"},{"product_id":"savior-12-chainsaw-bar-and-2-pack-45dl-chains-for-dewalt-dccs620b-3-8-lp-043-semi-chisel-tail-mount","title":"Savior 12\" Chainsaw Bar and 2-Pack 45DL Chains for DEWALT DCCS620B — 3\/8\" LP .043\" Semi‑Chisel, Tail‑Mount","description":"\u003cp\u003e\u003cstrong\u003eThe Savior 12\" chainsaw bar and twin 45DL low‑profile chains provide a direct replacement for DEWALT DCCS620B-style cordless saws, delivering reliable cutting performance and easier chain maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 12\" cordless chainsaw needs a fresh guide bar and a pair of replacement chains, this Savior kit is built to match common OEM dimensions and fitment. It includes a 12\" tail‑mount guide bar engineered for a 7‑tooth sprocket nose and two semi‑chisel 45DL saw chains with .043\" gauge and 3\/8\" low‑profile pitch. The package also supplies basic accessories for installation and storage so you can get back to work quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my DEWALT DCCS620B or similar models?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the bar and chains are specified to match DEWALT DCCS620B and similar 12\" cordless saws that use a tail‑mount 12\" bar and a 7‑tooth sprocket nose. Compatibility extends to several other brand models that share the same mounting and pitch specifications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits DEWALT DCCS620B and DCCS620P1 models.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Craftsman CMCCS620 and CMZCSC12 and Black \u0026amp; Decker LCS1240.\u003c\/li\u003e\n  \u003cli\u003eBar code MLE, tail mount A041, sprocket nose tooth count 7.\u003c\/li\u003e\n  \u003cli\u003eChain specs: 45 drive links, 3\/8\" LP pitch, .043\" gauge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the Savior guide bar and chain set?\u003c\/h3\u003e\n\n\u003cp\u003eThe guide bar is heat treated and quenched for strength at key points like rivets and the bar rail, while each chain receives a protective oil finish to resist corrosion and reduce early wear. Chains are semi‑chisel, low‑kickback style for balanced cutting and reduced grab risk, but appropriate safe handling and PPE remain essential.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGuide bar heat treatment increases resistance to bending and wear.\u003c\/li\u003e\n  \u003cli\u003eProtective oil finish reduces surface rust and eases break‑in.\u003c\/li\u003e\n  \u003cli\u003eSemi‑chisel cutters balance cutting speed and durability.\u003c\/li\u003e\n  \u003cli\u003eLow‑kickback design lowers rebound risk compared to full‑chisel chains.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included in the package and how does it simplify replacement?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit contains everything needed for a straightforward swap: the 12\" guide bar, two 45DL saw chains, a protective bar cover, two storage bags, and a pair of XL gloves for handling the chain during installation. The gloves are intended to keep hands clean while positioning the chain and are not cut resistant.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 × 12\" Savior guide bar (tail mount A041).\u003c\/li\u003e\n  \u003cli\u003e2 × 45DL saw chains (3\/8\" LP, .043\" gauge, 45 drive links).\u003c\/li\u003e\n  \u003cli\u003e1 × protective bar cover and 2 × storage bags for transport.\u003c\/li\u003e\n  \u003cli\u003e1 × pair of XL gloves for handling (not anti‑cut rated).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain the bar and chains for longer life?\u003c\/h3\u003e\n\n\u003cp\u003eRegular lubrication, correct tensioning, and routine sharpening are the best ways to maximize performance and wear life. Inspect the sprocket nose, rails, and rivets after heavy use and replace chains when cutters are too worn to sharpen safely.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eKeep the chain oiled during operation and check oil level before each use.\u003c\/li\u003e\n  \u003cli\u003eAdjust chain tension when cool — not overly tight, not sagging.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters evenly and replace when teeth are rounded or damaged.\u003c\/li\u003e\n  \u003cli\u003eInspect mounting studs and ensure the bar seats securely on the saw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for: Homeowners and hobbyists who own a 12\" DEWALT‑style cordless chainsaw or compatible models and want a cost‑effective replacement bar and extra chains for yard work, pruning, and light cutting. It’s also useful for DIYers who prefer carrying a spare chain for uninterrupted work. This kit gives a complete, ready‑to‑install set with basic handling accessories for safe chain changes and storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bar and chain fit my DEWALT DCCS620B?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The bar is a 12\" tail‑mount (A041) with a 7‑tooth sprocket nose and the chains are 3\/8\" LP .043\" 45DL, matching DCCS620B fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The gloves are for handling and keeping hands clean while changing chains; they are not anti‑cut rated.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54200263114936,"sku":"B0DHZNHZR7","price":69.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-12in-bar-front-view.jpg?v=1790609519"},{"product_id":"savior-16-inch-replacement-chainsaw-chain-3-pack-for-ego-cs1600-cs1613-3-8-lp-043-56dl-semi-chisel-low-kickback","title":"Savior 16-inch Replacement Chainsaw Chain 3-Pack for EGO CS1600\/CS1613 — 3\/8\" LP .043\" 56DL, Semi-Chisel Low-Kickback","description":"\u003cp\u003e\u003cstrong\u003eSavior's 3-piece 16-inch replacement chainsaw chain set fits many popular 16\" saws, using a 3\/8\" low-profile pitch, .043\" gauge and 56 drive links for reliable cutting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you need a spare chain for seasonal pruning, a quick field replacement, or a set for shared tools, this 3-pack from Savior matches OEM dimensions for EGO CS1600\/CS1613 and dozens of other 16\" chainsaws. The package includes three identical chains plus a pair of gloves and is designed with semi-chisel cutters and a low-kickback profile to balance cutting speed and control. These chains are compatible with many major brands, making them a convenient, cost-effective choice when an original manufacturer part is not available or when you want to keep extra chains on hand.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my EGO CS1600 or CS1613 chainsaw?\u003c\/h3\u003e\n\u003cp\u003eIf your saw uses a 16\" bar with a 3\/8\" low-profile pitch and .043\" gauge, this Savior chain is built to the same specifications as many OEM parts. Check the sprocket and drive link count on your current chain; this set has 56 drive links. If those dimensions match, the chains should install and run correctly on compatible EGO models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFit: 16-inch bar length\u003c\/li\u003e\n  \u003cli\u003ePitch: 3\/8\" LP (low profile)\u003c\/li\u003e\n  \u003cli\u003eGauge: .043\" (1.1 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive links: 56 - matches listed EGO models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Saw chain balance cutting and safety?\u003c\/h3\u003e\n\u003cp\u003eThe Savior chain uses semi-chisel cutters and a low-kickback design to deliver good cutting efficiency while reducing aggressive kickback characteristics. Semi-chisel teeth retain sharpness longer in dirty conditions and still cut effectively through limbs and firewood. The low-kickback profile is a safer option for general property maintenance and homeowner use compared with full-chisel, high-aggression chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCutter type: semi-chisel for durability\u003c\/li\u003e\n  \u003cli\u003eKickback: reduced by low-profile design\u003c\/li\u003e\n  \u003cli\u003eApplication: pruning, limb removal, firewood cutting\u003c\/li\u003e\n  \u003cli\u003eMaintenance: easier sharpening intervals than full-chisel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich other brands and models are compatible with this 16\" chain?\u003c\/h3\u003e\n\u003cp\u003eSavior lists cross-references to many OEM part numbers and popular chainsaw models. This chain replaces several Oregon and Echo part numbers and works on many battery and cordless models from DeWalt, Makita, Milwaukee, Greenworks and others that accept 3\/8\"LP .043\" 56DL chains. Always verify bar and sprocket specifications before purchasing to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands: EGO, DeWalt, Makita, Milwaukee, Greenworks, Echo\u003c\/li\u003e\n  \u003cli\u003eOEM cross-references included for easier matching\u003c\/li\u003e\n  \u003cli\u003eWorks with many 16\" battery and gas chainsaw models\u003c\/li\u003e\n  \u003cli\u003eCheck drive links and pitch for confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I get in the package and how should I handle installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains three identical 16\" saw chains and one pair of XL gloves to help keep hands clean during replacement; the gloves are not cut-resistant. Before installing, ensure the saw is powered off and the bar is secured. Lubricate the chain and bar according to your saw's manual, tension the chain to the manufacturer's spec, and wear appropriate cut-resistant PPE while sharpening or handling chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: 3 chains + 1 pair gloves (XL)\u003c\/li\u003e\n  \u003cli\u003eGloves: for oil isolation, not anti-cut protection\u003c\/li\u003e\n  \u003cli\u003eInstallation: power saw off, confirm tension and lubrication\u003c\/li\u003e\n  \u003cli\u003eCare: sharpen and inspect regularly for safe operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Savior 3PC 16\" chainsaw chain set is aimed at homeowners, landscapers, and tradespeople who use 16\" chainsaws and want an affordable, OEM-compatible replacement or spare set. It's especially useful for users of EGO CS1600\/CS1613 and other popular battery or gas 16\" models who need quick swaps on the job or several chains to rotate between sharpening and cutting tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit EGO CS1613 and CS1600?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your saw uses a 16\" bar with 3\/8\"LP pitch, .043\" gauge and 56 drive links, this chain matches those specs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the included XL gloves are for oil isolation and handling only; they are not cut-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54204151398584,"sku":"B0CNK3QT5S","price":90.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-front-packaging-16inch-chain.jpg?v=1790625066"},{"product_id":"savior-16-chainsaw-chain-3-pack-3-8-lp-050-57dl-16-inch-fit-low-kickback-semi-chisel","title":"Savior 16\" Chainsaw Chain 3-Pack 3\/8\" LP .050\" 57DL – 16-inch fit, low-kickback semi-chisel","description":"\u003cp\u003e\u003cstrong\u003eSavior 16\" 3\/8\" LP .050\" 57DL chainsaw replacement pack provides three low-kickback, semi-chisel chains engineered to fit 16-inch bars that accept 57 drive links.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're restoring an old electric saw, topping up a contractor's spares box, or keeping a weekend yard crew moving, this three-pack of Savior chains is built to match common OEM part references from ECHO, Oregon, REDMAX and other brands. Each chain is treated with protective oil, uses a 3\/8\" low-profile (.050\") configuration, and offers compatibility with a wide range of gas and electric saw models. The bundle also includes storage bags and a pair of gloves for safer handling and storage.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and OEM numbers does this chain replace?\u003c\/h3\u003e\n\u003cp\u003eThis Savior 57DL chain replaces multiple factory part numbers and fits many makes and models that use a 16\" bar with 57 drive links. It aligns with common ECHO and Oregon part identifiers and several Harbor Freight\/Bauer electric chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM references: ECHO 91PX57CQ, 91VG57CQ; Oregon 91PX057, 91VXL057 and variants.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references: REDMAX 574 10 30-01, S57\/T57 series and Harbor Freight BAUER 57622\/20112E-B.\u003c\/li\u003e\n  \u003cli\u003eFits saw models: ECHO CS series (CS-303T, CS-310, CS-370, etc.), Worx WG300 series, REDMAX GZ series, and many corded\/corded-electric models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain’s specification affect cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/8\" low-profile (LP) pitch with a .050\" gauge balances cutting speed and control for general-purpose cutting. Semi-chisel cutters keep sharpness cycles long while reducing the likelihood of severe kickback.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" LP pitch: smoother feed and reduced vibration for lighter bars.\u003c\/li\u003e\n  \u003cli\u003e.050\" (1.3 mm) gauge: fits thinner guide bars common on 16\" saws.\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel cutters: durable, easier to maintain sharpness than full-chisel in dirty wood.\u003c\/li\u003e\n  \u003cli\u003eLow-kickback design: improves operator control without sacrificing general cutting efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how do the extras help?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes three complete chains plus storage accessories and a glove pair so you can swap chains quickly and handle them safely. Protective oil on each chain helps prevent rust and eases initial break-in.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 saw chains: enough for extended use or multiple saws.\u003c\/li\u003e\n  \u003cli\u003e3 storage bags: prevent tangling and keep chains cleaner in storage.\u003c\/li\u003e\n  \u003cli\u003e1 pair of gloves (XL\/10): safer handling during installation and maintenance.\u003c\/li\u003e\n  \u003cli\u003ePre-applied protective oil: reduces friction and protects metal during storage and first use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this chain fits my bar and saw?\u003c\/h3\u003e\n\u003cp\u003eMeasure your bar and count drive links or check your saw’s manual for part numbers; this chain is for a 16\" bar with 57 drive links, 3\/8\" LP pitch and .050\" gauge. Cross-referencing OEM codes supplied earlier is the fastest confirmation method.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm bar length: 16 inches required.\u003c\/li\u003e\n  \u003cli\u003eCount drive links: must be 57 links to match sprocket engagement.\u003c\/li\u003e\n  \u003cli\u003eVerify pitch and gauge markings or compare to your old chain (3\/8\" LP and .050\").\u003c\/li\u003e\n  \u003cli\u003eUse OEM replacement numbers listed to match exact saw models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior 3-pack is aimed at homeowners, landscapers, and light-contracting users who run 16\" chainsaws from ECHO, Oregon, REDMAX, Bauer\/Harbor Freight and similar brands. It’s a practical bulk replacement for anyone wanting to keep a reliable spare supply, reduce downtime, and handle routine chain swaps with minimal fuss.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my ECHO CS-370?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your CS-370 uses a 16\" bar with 57 drive links, 3\/8\" LP pitch and .050\" gauge, this Savior chain is compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these chains on electric Harbor Freight Bauer saws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The chains list compatibility with Bauer\/Harbor Freight models such as 57622 and 20112E-B that accept 3\/8\" LP .050\" 57DL chains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54204452077752,"sku":"B0D4VGGDGL","price":81.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-front-view-16inch-chain.jpg?v=1790630576"},{"product_id":"savior-16-chainsaw-bar-and-chain-set-for-echo-cs310-cs330-16-bar-3-8-lp-050-56dl-heat-treated-kit","title":"Savior 16\" Chainsaw Bar and Chain Set for ECHO CS310\/CS330 – 16\" Bar, 3\/8\" LP .050\" 56DL, Heat-Treated Kit","description":"\u003cp\u003e\u003cstrong\u003eSavior’s 16-inch guide bar and matched 56DL low-profile chain replace ECHO CS310\/CS330 bars and chains, delivering a durable, low-kickback cutting setup compatible with many homeowner chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a ready-to-install replacement bar and chain set for routine pruning, limb removal, or small tree work, this Savior kit pairs a heat-treated 16\" guide bar with two .050\" gauge, 3\/8\" low-profile semi-chisel chains. The set includes protective covers, storage bags, and gloves so you receive a complete package that fits several small-to-medium gas chainsaw models without additional parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my ECHO CS310 or CS330?\u003c\/h3\u003e\n\u003cp\u003eYes — the 16\" guide bar uses the A041 tail mount with a 7-tooth sprocket nose and the chain is 56 drive links in 3\/8\" low-profile with .050\" gauge. It is designed to match the common mounting and sprocket specifications found on ECHO CS310\/CS330 models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBar: 16-inch, A041 tail mount, 7-sprocket nose, guide code SDE\u003c\/li\u003e\n  \u003cli\u003eChain: 56 drive links, 3\/8\" LP, .050\" gauge, semi-chisel\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM Oregon 27857 and 160SDEA041 bars\u003c\/li\u003e\n  \u003cli\u003eChain replaces Oregon S56 \/ 91PX056G equivalency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the Savior guide bar and chain?\u003c\/h3\u003e\n\u003cp\u003eThe guide bar undergoes heat treatment and quenching on each rivet to improve toughness and resist breakage. Each chain ships with a protective oil coating to reduce wear, stabilize tension changes, and improve smooth operation under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated rivets and quenched bar construction for added strength\u003c\/li\u003e\n  \u003cli\u003eProtective oil on chains reduces initial wear and eases break-in\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel cutters balance cutting efficiency and easier maintenance\u003c\/li\u003e\n  \u003cli\u003eLow-kickback design for safer homeowner use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the Savior 16\" bar and chain kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is packaged for immediate swap-out and storage: you get one 16\" bar, two matching saw chains, a bar cover, two storage bags, and a pair of XL gloves. The gloves are intended to help handle parts and keep oil off hands but are not cut-resistant safety gloves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 16\" guide bar and bar cover\u003c\/li\u003e\n  \u003cli\u003e2 x 56DL 3\/8\"LP .050\" saw chains\u003c\/li\u003e\n  \u003cli\u003e2 x storage bags for chains or tools\u003c\/li\u003e\n  \u003cli\u003e1 x pair gloves (XL\/10) for handling and oil isolation only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich other saw brands and models are compatible with this 16\" set?\u003c\/h3\u003e\n\u003cp\u003eThe Savior 16\" bar and chain fits a wide range of homeowner saws that accept a 16\" bar with A041 tail mount and 7-sprocket nose. Compatibility covers many popular names, making this kit a practical spare or replacement for cross-brand maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKobalt KCS 180B-06; Craftsman CMECS600, S160\u003c\/li\u003e\n  \u003cli\u003eEcho CS310; Earthwise CS33016; Homelite UT43104\/UT43123\u003c\/li\u003e\n  \u003cli\u003eMakita UC4051A\/XCU04; Poulan PL1416\/PL3816\/PR4218\u003c\/li\u003e\n  \u003cli\u003eRyobi RY3716\/RY43006; Wen 4017\/40417\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners, landscapers, and weekend woodworkers looking for a direct-fit replacement bar and chain for 16\" class saws will find this Savior kit convenient and complete. It’s aimed at users who want a durable guide bar and two ready-to-use chains with basic handling accessories, without needing professional-grade components. If you expect heavy commercial use or require certified cut-resistant PPE, consider professional-grade chains and safety equipment alongside this replacement kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace the OEM bar for Echo CS310?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 16\" A041 bar and 56DL chain match the Echo CS310 mounting and replace Oregon 27857\/160SDEA041.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the gloves are for handling and oil isolation only and are not cut-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54205803266232,"sku":"B0DHZN786M","price":104.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-16in-bar-front-view.jpg?v=1790646228"},{"product_id":"savior-18in-chainsaw-chain-3-pack-3-8lp-050-61dl-hard-chrome-cutters-heat-treated-rivets","title":"Savior 18in Chainsaw Chain 3-Pack 3\/8\"LP .050 61DL — Hard‑Chrome Cutters, Heat‑Treated Rivets","description":"\u003cp\u003e\u003cstrong\u003eSavior 3Pack 18\" replacement chains are 3\/8\" low-profile, .050\" gauge, 61-drive-link saw chains built to fit 18\" guide bars for compatible Stihl models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese three replacement chains are designed for homeowners and pros who need ready-to-install spares for 18\" bars commonly used on Stihl MS211, MS211C, MS241 C-M, MS250, MS251 and similar saws. Each chain is made from high-toughness German steel with hard chrome plating on cutters and heat-treated rivets for improved wear resistance and connection strength. The kit includes three chains, storage bags, Velcro straps and a pair of gloves to handle and store chains without transferring factory protective oil to your hands.\u003c\/p\u003e\n\n\u003ch3\u003eWill these chains fit my Stihl saw and 18\" guide bar?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on chain pitch, gauge and drive-link count rather than model name alone. These chains are 3\/8\" low-profile (3\/8\"LP) pitch, .050\" (1.3 mm) gauge, and include 61 drive links. Always compare those specifications to your saw’s recommended chain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePitch: 3\/8\"LP (low profile)\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" (1.3 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive links: 61DL suitable for many 18\" guide bars\u003c\/li\u003e\n  \u003cli\u003eCommon fit: Stihl MS211, MS211C, MS241 C-M, MS250, MS251 (verify your bar and chain plate)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable are these saw chains?\u003c\/h3\u003e\n\u003cp\u003eThe cutters are plated with industrial hard chrome and the chain steel is sourced from Germany, which increases abrasion resistance and toughness. Rivets are heat-treated and quenched to improve link strength and reduce the chance of breakage under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHard-chrome plated cutters for longer edge life\u003c\/li\u003e\n  \u003cli\u003eHeat-treated rivets to reduce link failure\u003c\/li\u003e\n  \u003cli\u003eProtective oil coating preserves chain during storage and transport\u003c\/li\u003e\n  \u003cli\u003eLow-kickback semi-chisel cutters for balanced performance and safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how do I handle the chains safely?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains three chains plus basic storage and handling accessories so you can swap chains quickly and store spares properly. The included gloves are for handling and keeping the protective oil off your hands — they are not cut-resistant.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3x 18\" saw chains (3\/8\"LP, .050\", 61DL)\u003c\/li\u003e\n  \u003cli\u003e3x storage bags and 3x Velcro straps for neat storage\u003c\/li\u003e\n  \u003cli\u003e1x pair of XL handling gloves to keep oil off hands (not cut-proof)\u003c\/li\u003e\n  \u003cli\u003eChains shipped with protective oil to reduce corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain and sharpen these chains?\u003c\/h3\u003e\n\u003cp\u003eRoutine maintenance keeps cutting performance consistent and extends chain life. Use a proper round file sized to the cutter and maintain correct depth gauge settings; inspect for damage or stretched rivets and replace chains showing excessive wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen cutters with the correct diameter round file\u003c\/li\u003e\n  \u003cli\u003eCheck and set depth gauges after sharpening\u003c\/li\u003e\n  \u003cli\u003eLubricate bar and chain before each use and store dry\u003c\/li\u003e\n  \u003cli\u003eReplace chain if rivets loosen or cutters crack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior 3-pack suits homeowners, arborists, landscapers and rental shops that use 18\" guide bars and need multiple ready spares. Choose this kit if your saw requires a 3\/8\" low-profile, .050\" gauge chain with 61 drive links and you want corrosion-protected chains with durable chrome-plated cutters and reinforced rivets for everyday cutting tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit all Stihl MS211 saws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Stihl models that use a 3\/8\"LP, .050\" gauge, 61-drive-link chain. Verify your saw’s chain pitch, gauge, and drive-link count first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the supplied gloves are for handling and keeping oil off your hands; they are not cut-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54205906780344,"sku":"B0D4VJYWB8","price":96.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-front-packaging-18in-chains.jpg?v=1790646969"},{"product_id":"savior-14-chainsaw-bar-and-chain-3-8lp-050-52dl-fits-husqvarna-120-135-reversible-lightweight-bar-2-chains","title":"Savior 14\" Chainsaw Bar and Chain 3\/8\"LP .050\" 52DL — Fits Husqvarna 120\/135, Reversible Lightweight Bar \u0026 2 Chains","description":"\u003cp\u003e\u003cstrong\u003eThe Savior 14\" guide bar and matching 3\/8\"LP .050\" 52-drive-link chains provide a ready-to-install replacement for small to mid-size saws, offering durable links, a reversible lightweight bar, and a complete accessory kit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your compact chainsaw needs a dependable bar and chain that match Husqvarna-style specs, this Savior set is engineered to the same 14\" 3\/8\" low-profile pitch and .050\" gauge used by many consumer saws. It ships with two chains, protective oil, storage bags, gloves, and a bar cover so you can replace worn components and get back to cutting quickly. The components are aimed at light commercial and homeowner use, balancing strength and maneuverability for pruning, limb removal, and firewood tasks.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my Husqvarna 120 or 135 model?\u003c\/h3\u003e\n\u003cp\u003eYes — the bar has a 14\" length, tail mount A041, 7-tooth sprocket nose and matches 3\/8\"LP pitch with a .050\" gauge and 52 drive links, which corresponds to the common replacement parts for many Husqvarna consumer saws. Confirm your model’s recommended bar length and nose\/sprocket type before ordering to ensure proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14\" guide bar with A041 tail mount and 7 tooth sprocket nose\u003c\/li\u003e\n  \u003cli\u003eChain: 3\/8\" low profile (LP), .050\" gauge, 52 drive links\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part cues such as 140SDEA041 and 27856\u003c\/li\u003e\n  \u003cli\u003eFits listed Husqvarna 36\/41\/120\/135\/136\/141 and many similar models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are the chains and bar for routine cutting?\u003c\/h3\u003e\n\u003cp\u003eThe chains feature heat-treated, quenched rivets for stronger link connections and a semi-chisel, low-kickback tooth profile to prioritize smoother cutting and reduced rebound. The bar arrives with protective surface oil to resist corrosion, and the reversible design extends service life by allowing rotation when one side wears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated rivets and quenching for improved joint strength\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel cutters for efficient cutting with lower maintenance\u003c\/li\u003e\n  \u003cli\u003eProtective oil coating to resist rust during storage\u003c\/li\u003e\n  \u003cli\u003eLightweight, reversible bar for longer usable life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how quickly can I get back to work?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed to minimize downtime by including two chains and the protective accessories needed for immediate installation and safe handling. You’ll receive a replacement bar, two saw chains, storage bags, a bar cover, and a pair of gloves so you can complete the swap without searching for additional parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 14\" Savior guide bar\u003c\/li\u003e\n  \u003cli\u003e2 x 3\/8\"LP .050\" 52-drive-link saw chains\u003c\/li\u003e\n  \u003cli\u003e2 x storage bags and 1 x chainsaw bar cover for transport\u003c\/li\u003e\n  \u003cli\u003e1 x pair of XL gloves (note: not cut-resistant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich other saw brands and models are compatible?\u003c\/h3\u003e\n\u003cp\u003eThe dimensions and pitch make this bar and chain set compatible with a wide range of consumer electric and gas saws beyond Husqvarna, including Greenworks, Worx, Ryobi, Echo, Oregon CS250 variants, Sun Joe and others that accept a 14\" 3\/8\"LP .050\" 52DL configuration. Always cross-check your owner's manual or existing bar markings to confirm match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Greenworks, WORX, RYOBI, Echo, Oregon CS250 series\u003c\/li\u003e\n  \u003cli\u003eWorks with many 14\" consumer electric and small gas chainsaws\u003c\/li\u003e\n  \u003cli\u003eCheck bar code SDE or tail mount A041 to verify fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, landscapers, and occasional light-commercial users who need a cost-effective, ready-to-install replacement bar and extra chains for routine pruning, firewood cutting, or property maintenance. It’s ideal when you want compatibility with common 14\" consumer saws, a reversible bar for extended life, and a kit that gets you cutting again without hunting down separate parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the chain compatible with Husqvarna 120?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 14\" 3\/8\"LP .050\" 52DL sizing and A041 tail mount match Husqvarna 120 specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include everything to replace the bar and chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes 1 bar, 2 chains, storage bags, a bar cover, and a pair of gloves for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54206025728184,"sku":"B0DHZMS8G8","price":108.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-14in-bar-front-view.jpg?v=1790647963"},{"product_id":"savior-16-chainsaw-bar-and-chain-combo-for-stihl-ms170-16-bar-with-2x-050-3-8lp-semi-chisel-chains","title":"Savior 16\" Chainsaw Bar and Chain Combo for Stihl MS170 — 16\" Bar with 2x .050\" 3\/8\"LP Semi‑Chisel Chains","description":"\u003cp\u003e\u003cstrong\u003eThe Savior 16\" chainsaw bar and chain combo is a complete replacement kit—16\" low-kickback guide bar with two .050\" gauge, 3\/8\"LP 55-drive-link semi-chisel chains—designed to fit many Stihl small to mid-size saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl MS170 or a compatible compact saw needs a reliable bar-and-chain replacement, this Savior combo supplies a reversible 16\" guide bar plus two semi-chisel chains and accessories for quick installation and longer use between tune-ups. The package includes protective oil coating, a bar cover, gloves, and storage bags so you can swap parts on the job and keep spares organized. Technical specs and compatibility are tailored to popular Stihl models and many older E-series machines that use the Oregon 160SDEA074 form factor.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my Stihl MS170 or similar saw?\u003c\/h3\u003e\n\u003cp\u003eYes — this set was engineered to match the mounting pattern and nose sprocket tooth count used by the Oregon 160SDEA074 bar. It fits a wide range of Stihl small-to-mid saws by matching pitch, gauge, drive link count, and tail mount type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16\" guide bar, tail mount A074, 7-tooth sprocket nose.\u003c\/li\u003e\n  \u003cli\u003eChain: 3\/8\" low-profile pitch, .050\" gauge, 55 drive links, semi-chisel cutters.\u003c\/li\u003e\n  \u003cli\u003eCompatible with MS170, MS180, MS192, MS200 series and many E-series models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Savior chain and bar hold up to regular use?\u003c\/h3\u003e\n\u003cp\u003eThe chain rivets are heat-treated and quenched for stronger connections, and chains arrive with a protective oil finish to resist corrosion and simplify break-in. The guide bar is lightweight and reversible, built for routine cutting, pruning, and property maintenance with reduced kickback characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated rivets for improved durability and reduced peening.\u003c\/li\u003e\n  \u003cli\u003eProtective oil coating to resist rust before first use.\u003c\/li\u003e\n  \u003cli\u003eLightweight, reversible bar for even wear distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how does it help get me cutting faster?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains everything needed to replace a worn bar and chain and keep a spare ready: one 16\" bar, two identical saw chains, storage bags, a bar cover, and a pair of gloves. Having two chains means you can rotate chains or keep a backup for continuous work without interruptions for sharpening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 16\" guide bar and 2 x matching saw chains (55DL each).\u003c\/li\u003e\n  \u003cli\u003e2 storage bags and 1 chainsaw bar cover for transport and protection.\u003c\/li\u003e\n  \u003cli\u003e1 pair XL gloves (note: not cut-resistant) for handling during changeover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain this bar and chain for best results?\u003c\/h3\u003e\n\u003cp\u003eRoutine maintenance prolongs chain life: keep proper chain tension, use recommended bar and chain oil, sharpen cutters when dull, and inspect rivets and drive links. Reversing the bar occasionally balances wear and small screws or nose sprocket should be checked for debris and proper lubrication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain correct chain tension and lubricate with bar oil every run.\u003c\/li\u003e\n  \u003cli\u003eSharpen semi-chisel cutters when performance drops; check rivets for tightness.\u003c\/li\u003e\n  \u003cli\u003eReverse the reversible bar periodically to even out wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Savior 16\" bar and chain combo is intended for homeowners, landscapers, and light commercial users who operate small to mid-size Stihl chainsaws and want a cost-effective, ready-to-install replacement. It suits anyone needing a complete spare kit with spare chains and basic protective accessories for routine cutting, pruning, firewood processing, and property upkeep.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain compatible with Stihl MS170?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 16\" bar with 3\/8\"LP pitch, .050\" gauge, and 55 drive links matches MS170 and many compatible Stihl models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The included XL gloves are for handling only and are not cut-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54206025695416,"sku":"B0DHZL6W56","price":113.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-16in-bar-front-view_c03aacb8-f3e6-49dd-906b-c40313c10cd6.jpg?v=1790647963"},{"product_id":"savior-20-chainsaw-bar-twin-3-8-050-72dl-chains-full-chisel-heat-treated-rivets","title":"Savior 20\" Chainsaw Bar \u0026 Twin 3\/8\" .050\" 72DL Chains — Full-Chisel, Heat-Treated Rivets","description":"\u003cp\u003e\u003cstrong\u003eThe Savior 20\" chainsaw bar and twin-chain combo is a complete replacement kit—20-inch guide bar paired with two full-chisel 3\/8\" .050\" 72-drive-link chains—designed to fit Husqvarna and many popular saw models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gives you a ready-to-install guide bar and spare chains plus essential accessories so you can get back to cutting quickly. The set replaces common OEM Oregon part numbers and fits a wide range of Husqvarna saws as well as models from Poulan, Craftsman, Jonsered, Makita and RedMax. Each chain is heat-treated for improved rivet strength and arrives with a protective oil finish; the bar is lightweight, reversible and suited for light commercial or homeowner use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my Husqvarna 455 or 460?\u003c\/h3\u003e\n\u003cp\u003eYes—this Savior combo is specified to replace the Oregon 200SFHK095\/578764\/584408 style combinations and matches the 20\" guide bar dimensions and 72DL chain length found on many Husqvarna models. Confirm your saw’s recommended pitch, gauge and drive link count before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Husqvarna models including 254, 257, 355, 359, 360, 455, 460, 560XP and others\u003c\/li\u003e\n  \u003cli\u003eBar: 20\" guide bar, tail mount K095, 11-tooth sprocket nose\u003c\/li\u003e\n  \u003cli\u003eChain: 3\/8\" pitch, .050\" gauge, 72 drive links, full-chisel cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable are the chains in this kit?\u003c\/h3\u003e\n\u003cp\u003eThe chains are manufactured with heat-treated rivets and quenched link assemblies to strengthen the joints and resist wear under typical cutting conditions. Each chain ships with a light protective oil layer to reduce corrosion in storage and to ease initial break-in.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel cutters for efficient cutting of green and softwood\u003c\/li\u003e\n  \u003cli\u003eHeat-treated rivets improve link fatigue resistance\u003c\/li\u003e\n  \u003cli\u003eProtective oil finish for storage and easier first use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how does this save downtime?\u003c\/h3\u003e\n\u003cp\u003eInstead of buying a single chain or bar, the package supplies two chains plus the bar and a few extras so you can swap a worn chain immediately and keep working. A plastic bar cover and a pair of gloves are included for safer handling and transport.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 20\" guide bar (tail mount K095, sprocket nose 11T)\u003c\/li\u003e\n  \u003cli\u003e2 x 3\/8\" .050\" 72DL full-chisel chains\u003c\/li\u003e\n  \u003cli\u003e1 x pair of XL gloves (general protection, not cut-resistant)\u003c\/li\u003e\n  \u003cli\u003e1 x chainsaw bar cover for storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain the bar and chains for best performance?\u003c\/h3\u003e\n\u003cp\u003eKeep the chain sharp, maintain correct tension and use appropriate bar and chain oil during operation. Regular inspections for wear, looser rivets or bent links will lengthen the life of both chains and the guide bar.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen cutters with the proper round file and depth gauge guide\u003c\/li\u003e\n  \u003cli\u003eCheck chain tension before each use—snug but still able to rotate by hand\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer-recommended bar and chain oil and clean debris after use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Savior 20\" bar and dual-chain kit is aimed at homeowners, property managers and light-commercial users who run mid-size saws like Husqvarna 455\/460-series or compatible Makita and Poulan models. It suits anyone who wants a complete replacement set that reduces downtime by including a spare chain and protective accessories, while matching common OEM specs for straightforward installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bar and chain fit Husqvarna 455 Rancher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 20\" 3\/8\" .050\" 72DL configuration is listed compatible with Husqvarna 455 and 455 Rancher models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The included XL gloves provide basic hand protection but are not cut-resistant; use appropriate safety gloves for cutting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54206219124920,"sku":"B0DHZLXJ21","price":127.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-20in-bar-front-packaging.jpg?v=1790649021"},{"product_id":"savior-14-chainsaw-bar-and-chain-combo-for-stihl-ms170-compatible-saws-14-bar-3-8-lp-050-50dl-low-kickback-semi-chisel","title":"Savior 14\" Chainsaw Bar and Chain Combo for Stihl MS170-Compatible Saws — 14\" Bar, 3\/8\" LP .050\" 50DL, Low-Kickback Semi-Chisel","description":"\u003cstrong\u003eSavior's 14-inch bar and twin-chain combo is a replacement guide bar and low-kickback chain set engineered to fit a wide range of small Stihl-style saws, including MS170-compatible models.\u003c\/strong\u003e\n\n\u003cp\u003eThis 14\" guide bar paired with two 3\/8\" LP, .050\" gauge, 50-drive-link semi-chisel chains offers a ready-to-install replacement for worn or damaged OEM bars and chains. Designed for light commercial use and homeowner cutting chores, the combo includes protective accessories and is compatible with many Stihl and equivalent saw models. Components are pre-treated and oiled for corrosion resistance and easier break-in.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws will this bar and chain fit?\u003c\/h3\u003e\n\u003cp\u003eThe Savior 14\" combo is built to match the mounting dimensions and sprocket nose specifications common on smaller Stihl-style chainsaws. It lists compatibility with a broad set of Stihl models and several equivalent saws from other manufacturers that use the same tail mount and sprocket count.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many Stihl models: MS192C-E, MS200 series, MS230, MS250, MS251 and similar variants.\u003c\/li\u003e\n  \u003cli\u003eCompatible with saws using a 7-tooth sprocket nose and A074 tail mount.\u003c\/li\u003e\n  \u003cli\u003eAlso replaces Oregon combo part no. 105667 and fits certain Oleo-Mac\/OLYMPYK units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the chain and bar built for durability?\u003c\/h3\u003e\n\u003cp\u003eSavior applies heat treatment and quenching to each rivet, strengthening link connections and improving fatigue resistance. The bar and chains receive a protective oil finish to limit surface corrosion and reduce initial friction during break-in.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated rivets for improved joint strength and longevity.\u003c\/li\u003e\n  \u003cli\u003eProtective oil coating applied to chains and bar to resist rust and ease installation.\u003c\/li\u003e\n  \u003cli\u003eLightweight, reversible guide bar helps with maneuverability and even wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make this set safe and easy to use?\u003c\/h3\u003e\n\u003cp\u003eThe included chains are low-kickback semi-chisel cutters intended to balance cutting performance with reduced kickback risk. The package bundles storage and protective items so you can transport and store the bar and chains safely between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-kickback semi-chisel cutters for predictable cutting behavior.\u003c\/li\u003e\n  \u003cli\u003eComes with a chainsaw bar cover and two storage bags to protect edges and prevent oil transfer.\u003c\/li\u003e\n  \u003cli\u003eIncludes gloves (XL\/10) for basic handling—note they are not cut-resistant protective gloves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do you get in the box and how does it help maintain the saw?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the guide bar, two identical saw chains, storage accessories, and basic hand protection so you have spares and carrying options. Having a spare chain ready reduces downtime; the cover and bags keep chains clean when not in use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 14\" guide bar matched to a 7-tooth sprocket nose (A074 tail mount).\u003c\/li\u003e\n  \u003cli\u003e2 × 3\/8\" LP, .050\" gauge, 50 drive link semi-chisel chains for quick replacement.\u003c\/li\u003e\n  \u003cli\u003e2 × storage bags, 1 × bar cover, and 1 × pair of XL handling gloves included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior 14\" bar and chain kit suits homeowners, small acreage landowners, and light commercial users who own Stihl-style small to mid-size chainsaws and need a reliable, ready-to-install replacement or spare set. It’s ideal for users who prioritize compatibility with specific OEM part references and want spare chains and storage accessories included. Do not rely on the included gloves for cut protection; use certified safety gear when operating a chainsaw.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bar replace Oregon part 105667?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Savior 14\" bar and chain combo is listed as a replacement for Oregon combo part no. 105667.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The package gloves are basic handling gloves (XL\/10) and are not cut-resistant; use certified protective gloves when cutting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54206401085624,"sku":"B0DHZL8KF5","price":106.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-14in-guide-bar-front-view.jpg?v=1790650287"},{"product_id":"savior-18-chainsaw-bar-twin-chain-combo-325-050-72dl-for-husqvarna-440-txl-k095-heat-treated-rivets","title":"Savior 18\" Chainsaw Bar \u0026 Twin Chain Combo .325\" .050\" 72DL for Husqvarna 440 — TXL K095, Heat‑Treated Rivets","description":"\u003cp\u003e\u003cstrong\u003eThe Savior 18\" chainsaw bar and twin-chain combo is a replacement guide bar assembly (18\", .325\" pitch, .050\" gauge, 72 drive links) engineered for mid‑size chainsaws like the Husqvarna 440.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies everything needed to swap worn components: one 18-inch TXL guide bar with a K095 tail mount and 10-tooth sprocket nose plus two matching saw chains. The bar and chain set is built for routine cutting tasks—yard maintenance, firewood preparation, and light commercial work—offering a durable, reversible bar and heat-treated chain rivets for improved joint strength. The package also includes storage accessories and gloves so you can store and transport the components safely.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my Husqvarna 440 or similar saw?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The Savior 18\" TXL guide bar with K095 tail mount and 10-sprocket nose is compatible with a wide range of small and mid-size saws. Confirm your saw’s required pitch, gauge, length, and tail mount before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpec sheet: 18\" length, .325\" pitch, .050\" gauge, 72 drive links.\u003c\/li\u003e\n  \u003cli\u003eTail mount code: K095; sprocket nose: 10 teeth (TXL type).\u003c\/li\u003e\n  \u003cli\u003eFits many Husqvarna models including 440, 345, 445, 450 Rancher and similar chainsaws.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with selected Echo, Craftsman, Makita, Dolmar, John Deere and McCulloch models—check OEM cross-reference numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the construction affect durability and performance?\u003c\/h3\u003e\n\n\u003cp\u003eThe chain rivets are heat treated and quenched to strengthen link connections, and the bar receives a protective oil finish to resist corrosion and reduce friction during initial use. Those manufacturing details help the combo maintain cutting efficiency and extend usable life under typical workloads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeat-treated rivets for stronger link joints and longer wear life.\u003c\/li\u003e\n  \u003cli\u003eProtective oil coating delays surface corrosion and eases initial break-in.\u003c\/li\u003e\n  \u003cli\u003eReversible bar design doubles service life before replacement.\u003c\/li\u003e\n  \u003cli\u003eLightweight construction that balances maneuverability with durability for mid-range tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the Savior 18\" kit and how do I store it?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit arrives with the guide bar, two saw chains, protective bar cover, storage bags, and a pair of gloves (XL\/size 10). These extras let you transport and store the components safely and keep the spare chain protected and ready to install.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x 18\" TXL guide bar (K095 tail mount, 10-tooth sprocket nose).\u003c\/li\u003e\n  \u003cli\u003e2 x matching .325\" .050\" 72DL saw chains.\u003c\/li\u003e\n  \u003cli\u003e2 x storage bags, 1 x bar cover, and 1 x pair of non-cut-resistant gloves (XL).\u003c\/li\u003e\n  \u003cli\u003eStore in a dry place with light oil on metal surfaces to prevent rust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need any tools or adjustments to install this bar and chain?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows the same basic steps as most chainsaw bar swaps: remove the side cover, fit the bar into the mounting studs, loop the chain over the sprocket nose and drive sprocket, then set chain tension and replace the cover. You’ll want a scrench or appropriate wrench and a way to check tension and lubrication.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: scrench or socket wrench to remove side cover and adjust tension.\u003c\/li\u003e\n  \u003cli\u003eAdjust chain tension so it snaps back into place but still moves freely.\u003c\/li\u003e\n  \u003cli\u003eAlways check the saw’s manual for torque specs and final safety checks.\u003c\/li\u003e\n  \u003cli\u003eUse bar oil and run a short test cut to confirm proper feed and lubrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior 18\" bar and chain combo is suited for homeowners and light‑commercial users who service mid‑size chainsaws like Husqvarna 440 and similar models. It’s ideal for people who want a full replacement package—bar, two chains and storage accessories—to minimize downtime and keep a spare chain on hand for ongoing cutting or property maintenance tasks.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this bar compatible with Husqvarna 440?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 18\" TXL bar with K095 tail mount and .325\" pitch fits Husqvarna 440 when matching gauge and drive link counts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a spare chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains two identical .325\" .050\" 72DL chains plus a bar cover and storage bags.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54206615093432,"sku":"B0DHZNKWP5","price":125.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-18in-bar-front-view.jpg?v=1790652119"},{"product_id":"savior-16-inch-chainsaw-bar-2-pack-3-8lp-043-55dl-chains-fits-stihl-ms170-ms180-low-kickback-reversible-bar","title":"Savior 16-inch Chainsaw Bar + 2-Pack 3\/8LP .043 55DL Chains — Fits Stihl MS170\/MS180, Low-Kickback Reversible Bar","description":"\u003cstrong\u003eSavior's 16\" guide bar and twin 3\/8\"LP .043\" 55DL chains are a complete replacement combo designed to fit many Stihl small-to-mid-size chainsaws for reliable cutting and easy installation.\u003c\/strong\u003e\n\u003cp\u003eThis kit bundles a 16-inch reversible guide bar with two semi-chisel, low-kickback saw chains plus protective accessories so you can replace worn components and get back to work quickly. The bar uses a 7-tooth sprocket nose and A074 tail mount code (MLE series), and the chains are heat-treated at every rivet for reinforced link strength. Included extras — storage bags, a bar cover, and gloves — protect the components and make transport straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Stihl models will this 16\" bar and chain fit?\u003c\/h3\u003e\n\u003cp\u003eThe Savior combo matches common Stihl guide-bar fittings and replaces OEM part 164MLEA074 \/ 3005 008 3913. It fits a long list of small and entry-level saws, covering older and current models used for yard work and light cutting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit: Stihl MS170, MS171, MS180, MS180C-B, MS180C-BE, MS181, MS192C-E, MS192T C-E.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with many older\/electric hybrid models like 009, 010, 011, 012, 015, 017–020 series and select E-series.\u003c\/li\u003e\n  \u003cli\u003eCheck your bar nose tooth count (7) and tail mount A074\/MLE code before purchasing to confirm compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are these chains for everyday cutting?\u003c\/h3\u003e\n\u003cp\u003eSavior designs the chains for improved wear resistance and stronger links through rivet heat treatment and quenching, while the semi-chisel cutters offer a balance of cutting speed and easier maintenance. The low-kickback profile reduces kickback energy compared with full-chisel designs, making it more suitable for general yard and homeowner use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChain material: heat-treated rivets and quenched link construction for durability.\u003c\/li\u003e\n  \u003cli\u003eCutter type: semi-chisel for smoother performance on mixed wood and easier filing.\u003c\/li\u003e\n  \u003cli\u003eProfile: low-kickback geometry to help limit kickback severity during typical tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how does that help me maintain the saw?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready to install with two chains and one reversible bar so you can swap or rotate components as wear occurs. Protective oil coating on each part slows surface corrosion during storage, and the included accessories make transport and basic maintenance more convenient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 x 16\" guide bar, 2 x saw chains (3\/8\"LP .043\" 55DL), 2 x storage bags, 1 x bar cover, 1 x pair of XL gloves (not cut-resistant).\u003c\/li\u003e\n  \u003cli\u003eBar is reversible and lightweight for easier handling and chain rotation to extend service life.\u003c\/li\u003e\n  \u003cli\u003eProtective oil finish reduces rust during storage and shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic chainsaw maintenance: match sprocket nose tooth count and tail-mount code, fit the bar and chain on the sprocket, and tension per saw manufacturer recommendations. Always wear appropriate PPE and verify chain direction and tension before starting the saw.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify 7-tooth sprocket nose and A074 (MLE) tail mount before buying.\u003c\/li\u003e\n  \u003cli\u003eEnsure chain direction and proper tension; follow your saw manual for torque and tension specs.\u003c\/li\u003e\n  \u003cli\u003eWear eye protection and work gloves during installation; gloves in the kit are not cut-resistant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Savior 16\" bar and dual-chain combo suits homeowners, landscapers, and light-commercial users who run Stihl small-to-mid-size saws and want an economical replacement with durability-focused construction. It’s ideal for routine pruning, firewood cutting, and property maintenance when you need a ready-to-install bar and extra chains plus storage protection in a single purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bar and chain set fit my Stihl MS180?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 16\" A074\/MLE bar with 7-tooth nose and 3\/8\"LP .043\" 55DL chains are listed as compatible with Stihl MS180 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit includes XL gloves for handling and assembly, but they are not cut-resistant and aren't PPE for saw operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54206615257272,"sku":"B0DHZNRDL8","price":104.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-16in-bar-chain-front-packaging.jpg?v=1790652120"},{"product_id":"savior-18-inch-chainsaw-chains-3-pack-325-pitch-050-gauge-68dl-semi-chisel-heat-treated-rivets","title":"Savior 18-inch Chainsaw Chains 3-Pack .325 pitch .050 gauge 68DL — Semi‑Chisel, Heat‑Treated Rivets","description":"\u003cp\u003e\u003cstrong\u003eSavior 3-pack replacement chains designed for 18-inch guide bars — .325\" pitch, .050\" (1.3 mm) gauge, 68 drive links — offer a durable semi‑chisel cutting option compatible with many Stihl models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement chains are built for homeowners and pros who need a reliable spare or quick swap for common mid-size chainsaws. Each chain is heat-treated at the rivets, oil-treated for corrosion resistance, and engineered with a low-kick semi-chisel profile to balance cutting speed and safety. The set includes three chains and a pair of protective gloves to keep hands cleaner during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my Stihl MS250 or MS251?\u003c\/h3\u003e\n\u003cp\u003eYes — the chain matches the typical requirements for many Stihl mid-size saws that use an 18\" bar with .325\" pitch and .050\" gauge. Check your saw’s manual or the stamped numbers on your existing bar to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 18\" guide bars (check bar length to match).\u003c\/li\u003e\n  \u003cli\u003e.325\" pitch and .050\" (1.3 mm) gauge specification.\u003c\/li\u003e\n  \u003cli\u003e68 drive links — count links on the old chain to verify.\u003c\/li\u003e\n  \u003cli\u003eListed compatible models: MS230, MS241, MS250, MS251 and similar models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are these Savior chains?\u003c\/h3\u003e\n\u003cp\u003eThe chains are manufactured with rivet heat treatment and quenching to strengthen link connections and reduce breakage risk. A protective oil finish helps resist corrosion and friction, while the semi‑chisel cutter profile lowers kickback compared with full‑chisel designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRivet heat-treatment increases tensile strength and reliability.\u003c\/li\u003e\n  \u003cli\u003eProtective oil finish reduces rust and smooths operation.\u003c\/li\u003e\n  \u003cli\u003eSemi‑chisel cutters for a balance of sharpness and reduced kick.\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain consistent tension and smoother cutting action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how do I install them safely?\u003c\/h3\u003e\n\u003cp\u003eThe pack contains three 18\" chains plus one pair of XL gloves to keep hands clean while changing chains; the gloves are not cut-proof. Installing requires standard chainsaw maintenance tools: bar nuts, guide bar alignment, and correct tensioning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 3 chains (18\", .325\" .050\", 68DL) and 1 pair of XL gloves.\u003c\/li\u003e\n  \u003cli\u003eUse proper gloves and eye protection when handling and installing chains.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque and tension specifications for safe operation.\u003c\/li\u003e\n  \u003cli\u003eCheck chain direction and lubricate bar groove before first use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm I need a .050\" gauge and not a different size?\u003c\/h3\u003e\n\u003cp\u003eGauge differences matter because the chain must seat correctly in the bar groove. If your saw was purchased or serviced around mid‑2023 or later, verify the gauge on your bar or in the owner’s manual — some newer saws shifted to .050\" (1.3 mm) chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLook at the bar’s stamped specifications for pitch, gauge, and link count.\u003c\/li\u003e\n  \u003cli\u003eMeasure the width of the drive link or check the manual if unsure.\u003c\/li\u003e\n  \u003cli\u003eBuying the wrong gauge prevents proper fit and safe operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Savior 3-pack suits homeowners, landscapers, and small‑forest operators who own mid‑size chainsaws (Stihl MS230 series, MS250\/251, compatible Echo and RedMax models) and want spare chains for frequent cutting, seasonal work, or quick replacements. Choose this set if you need multiple reliable chains that balance cutting efficiency and reduced kickback, plus an economical spare supply for uninterrupted work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit Stihl MS250 and MS251?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits 18\" bars with .325\" pitch, .050\" gauge, and 68 drive links used by many MS250\/MS251 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the gloves are for handling and keeping hands clean during installation, not cut-resistant.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54207250989240,"sku":"B0DFXWMMWP","price":96.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-front-packaging-18inch-chain.jpg?v=1790654993"},{"product_id":"savior-20-chainsaw-bar-chain-combo-325-063-20in-vxl-bar-with-2-low-kickback-chains","title":"Savior 20\" Chainsaw Bar \u0026 Chain Combo .325\/.063 - 20in VXL Bar with 2 Low-Kickback Chains","description":"\u003cstrong\u003eSavior's 20\" chainsaw bar and two 81-drive-link .325\"\/.063\" chains are a complete replacement kit built to fit many Stihl models, including the MS291.\u003c\/strong\u003e\n\n\u003cp\u003eThis 20-inch guide bar and chain combo from Savior supplies a ready-to-install replacement set for homeowners and pros who need a compatible, durable option for older Stihl saws that use a .063\" gauge and .325\" pitch. The package pairs a heat-treated, rivet-reinforced VXL-style bar with two semi-chisel, low-kickback chains and practical accessories so you can get back to cutting with minimal downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Stihl saws and original parts does this kit replace?\u003c\/h3\u003e\n\u003cp\u003eThis combo matches many older and popular Stihl models that use a 20\" bar with a .063\" gauge. It also serves as an aftermarket equivalent to common Oregon part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Stihl models: 024, 026, 028, 029, 030, 031, 032, 034, 036, 039, 040, MS260, MS261, MS270, MS271 (older .063\" versions), MS280, MS290, MS291, MS310, MS341, MS360, MS361, MS390, MSE220.\u003c\/li\u003e\n  \u003cli\u003eReplaces Oregon bar: 203VXLGD025 (20\" VXL style with D025 tail mount and 12-tooth sprocket nose).\u003c\/li\u003e\n  \u003cli\u003eReplaces Oregon chain models: L81 and 22BPX081G (81 drive links, .325\" pitch, .063\" gauge).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the Savior bar and chain built for durability and smoother cutting?\u003c\/h3\u003e\n\u003cp\u003eThe guide bar is manufactured with heat-treated and quenched rivets for strength, while the chains receive a protective oil finish to resist wear. Together they help reduce tension shifts and promote steadier performance under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBar construction: reinforced VXL-style bar with treated rivets and sprocket nose featuring 12 teeth.\u003c\/li\u003e\n  \u003cli\u003eChain design: semi-chisel cutters and low-kickback profile for controlled cutting and easier maintenance.\u003c\/li\u003e\n  \u003cli\u003eProtective finish: factory oil coating on chains to limit surface corrosion and initial wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how does it save installation time?\u003c\/h3\u003e\n\u003cp\u003eSavior supplies everything you need to fit the bar and chains and store spare components safely. That reduces trips to the parts store and helps you get the saw back in service quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded items: 1× 20\" chainsaw bar, 1× bar cover, 2× saw chains (81DL), 2× storage bags, 1× pair of XL (size 10) gloves.\u003c\/li\u003e\n  \u003cli\u003ePractical notes: gloves protect hands from oil while handling chains but are not cut-resistant gloves.\u003c\/li\u003e\n  \u003cli\u003eSpare chain: two chains let you swap and continue cutting if one needs sharpening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this affect chain tensioning, maintenance, or safety steps I should follow?\u003c\/h3\u003e\n\u003cp\u003eUsing a correctly sized bar and chain minimizes unexpected tension changes and keeps the saw running smoothly. Regular tension checks and proper lubrication remain essential for safe, efficient operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck chain tension before each use and after initial run-in; re-tension when cold and adjust again after warm-up cuts.\u003c\/li\u003e\n  \u003cli\u003eUse recommended bar and chain oil to maintain lubrication and prevent premature wear.\u003c\/li\u003e\n  \u003cli\u003eInspect sprocket nose and rivets periodically for wear and replace components when standards fall below safe limits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Savior 20\" bar and chain combo suits homeowners, land managers, and maintenance professionals who operate older Stihl chainsaws requiring a 20\" bar with .325\" pitch and .063\" gauge. It’s convenient for anyone needing a full replacement kit—bar, two spare chains, basic protection, and storage—without sourcing multiple individual parts. Avoid this kit if your saw requires a different pitch or gauge; confirm your chain pitch, gauge, and drive link count before ordering to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bar and chain fit my Stihl MS291?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 20\" bar and .325\"\/.063\" 81DL chain fit MS291 models that use a .063\" gauge and 20\" bar. Confirm your saw's pitch and gauge first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the gloves in this package cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—the included XL gloves protect from oil and dirt but are not cut-resistant. Use certified cut-resistant gloves for chain work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54207307612344,"sku":"B0F4MST3CZ","price":144.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-20inch-bar-front-view.jpg?v=1790655319"},{"product_id":"savior-20-chainsaw-chain-3-pack-3-8-pitch-050-gauge-70-dl-semi-chisel-low-kickback-hard-chrome-cutters","title":"Savior 20\" Chainsaw Chain 3-Pack 3\/8\" Pitch .050\" Gauge 70 DL — Semi‑Chisel Low‑Kickback, Hard‑Chrome Cutters","description":"\u003cp\u003e\u003cstrong\u003eSavior 20\" 3\/8\" pitch .050\" gauge 70-drive chainsaw chain — a three-pack of semi-chisel, low-kickback replacement chains engineered to fit common 20-inch saws from Echo, Poulan Pro, Homelite, McCulloch and similar models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis three-pack of Savior replacement chains supplies durable cutting performance for 20\" guide bars that require a 3\/8\" pitch, .050\" (1.3mm) gauge, and 70 drive links. Each chain is manufactured from high-toughness steel with hard chrome plating on the cutters, heat-treated rivets and a protective oil finish to resist wear and improve smooth running. The package includes three chains, storage bags, Velcro straps to prevent tangles, and a pair of gloves for handling—everything needed to replace worn chains and keep a saw ready for yard work or professional tasks.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws will this Savior chain fit?\u003c\/h3\u003e\n\u003cp\u003eThe Savior 20\" chain is compatible with many 20-inch chainsaw models that take a 3\/8\" pitch, .050\" gauge, and 70 drive links. It replaces common OEM part numbers such as Echo 72LPX70CQ, Poulan Pro 577180501, and Oregon D70\/E70 series. Always verify your saw’s bar and sprocket specifications before ordering to ensure correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Echo CS-590, CS-600P, CS-620P, CS-680, CS-8000 and similar models\u003c\/li\u003e\n  \u003cli\u003eCompatible with Poulan Pro PR5020, PP5020AV and related saws\u003c\/li\u003e\n  \u003cli\u003eWorks with Homelite XL series (XL-12, XL-15, XL-400, XL-700, XL-76, XL-800)\u003c\/li\u003e\n  \u003cli\u003eFits McCulloch Super Pro and Titan series including Super Pro 80\/81\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are these Savior chains?\u003c\/h3\u003e\n\u003cp\u003eThese chains are built from imported German steel designed for high toughness and reduced breakage. Cutters receive industrial hard chrome plating for abrasion resistance, rivets are heat-treated for stronger connections, and the semi-chisel, low-kickback design balances cutting performance with safer operation on general-purpose tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHard chrome plating on cutters improves wear resistance\u003c\/li\u003e\n  \u003cli\u003eHeat-treated rivets minimize link fatigue and loosening\u003c\/li\u003e\n  \u003cli\u003eProtective oil finish reduces corrosion and eases initial break-in\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel profile for broad cutting and lower kickback\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the Savior 3-pack and how does it help maintain my saw?\u003c\/h3\u003e\n\u003cp\u003eEach set contains three chains plus accessories to store and handle them safely. The included storage bags protect chains during transport, Velcro straps prevent tangles and add a lightweight carrying solution, and gloves keep hands cleaner when swapping or adjusting chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 saw chains sized for 20\" bars (3\/8\" pitch, .050\" gauge, 70 DL)\u003c\/li\u003e\n  \u003cli\u003e3 protective storage bags for off-season or job-site storage\u003c\/li\u003e\n  \u003cli\u003e3 reusable Velcro straps to secure chains or gear (holds ~15 kg)\u003c\/li\u003e\n  \u003cli\u003e1 pair of XL gloves for handling—note: not cut-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 20\" chainsaw that specifies a 3\/8\" pitch, .050\" gauge, and 70 drive links, and you want a cost-effective way to keep spare chains on hand, this Savior three-pack is a practical choice. It suits homeowners doing regular storm cleanup, landscapers who rotate chains through multiple saws, and small contractors who need durable, ready-to-install replacements that match common OEM part numbers. Check your saw’s manual or existing chain markings to confirm compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit my Echo CS-590?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Savior 20\" 3\/8\" .050\" 70DL chain fits Echo CS-590 when your saw uses a 20\" bar and the specified pitch and gauge.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the supplied XL gloves protect against oil and dirt but are not cut-resistant and do not replace safety gear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54207849595064,"sku":"B0D4V619J5","price":104.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-front-packaging-20inch-chain.jpg?v=1790657315"},{"product_id":"savior-16-chainsaw-bar-and-chain-kit-16-3-8lp-043-gauge-56dl-with-two-chains-gloves","title":"Savior 16\" Chainsaw Bar and Chain Kit — 16\" 3\/8\"LP .043\" Gauge, 56DL with Two Chains \u0026 Gloves","description":"\u003cp\u003e\u003cstrong\u003eThe Savior 16\" replacement guide bar and matching chains provide a 16-inch, 3\/8\" low-profile, .043\" gauge, 56-drive-link cutting system built to fit many popular small-to-mid size chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete bar-and-chain kit from Savior is engineered as a drop-in replacement for a wide range of electric and gas saws, offering a reversible lightweight bar, semi-chisel low-kickback chains, and reinforced link construction. The set ships with two chains, protective cover and storage bags, and gloves so you can swap or store components right away.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my saw model?\u003c\/h3\u003e\n\n\u003cp\u003eIf your saw accepts a 16\" guide bar with a 3\/8\" low-profile pitch and .043\" gauge with 56 drive links, this Savior kit is compatible. The tail mount matches A041 style bars and the sprocket nose has seven teeth; the guide bar code is MLE. It’s intended for many popular consumer and pro-sumer cordless and small gas saw models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 16\" bars with tail mount A041 and 7-tooth sprocket nose.\u003c\/li\u003e\n  \u003cli\u003eChain spec: 3\/8\"LP pitch, .043\" gauge, 56 drive links (semi-chisel, low-kickback).\u003c\/li\u003e\n  \u003cli\u003eCommonly compatible with models from ECHO, Ryobi, Husqvarna, Milwaukee, Greenworks and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this bar and chain built for durability and safety?\u003c\/h3\u003e\n\n\u003cp\u003eSavior strengthens each chain connection through heat treatment and quenching of rivets to improve joint integrity under load. The chains and bar arrive coated in protective oil to reduce corrosion and initial wear; the semi-chisel, low-kickback cutters balance aggressive cutting with user control. The reversible guide bar is lightweight and designed for easy maneuvering during limbing, pruning, and general cutting tasks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeat-treated and quenched rivets for tougher link joints.\u003c\/li\u003e\n  \u003cli\u003eProtective oil finish to resist rust and reduce break-in wear.\u003c\/li\u003e\n  \u003cli\u003eReversible lightweight bar for extended service life and balanced handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how quick is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes one 16\" guide bar, two matching saw chains, two storage bags, a chainsaw bar cover, and a pair of XL non-cut gloves (for handling, not cut-resistant). Installation is straightforward for anyone familiar with chain tensioning: mount the bar, loop the chain onto the sprocket and adjust tension following your saw maker’s instructions. Because two chains are included, you can swap quickly when one dulls.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage: 1 guide bar, 2 chains, 2 storage bags, 1 bar cover, 1 pair of XL gloves.\u003c\/li\u003e\n  \u003cli\u003eQuick hand installation — tension and oil before first cut.\u003c\/li\u003e\n  \u003cli\u003eExtra chain included for immediate replacement and extended runtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain spec affect cutting performance?\u003c\/h3\u003e\n\n\u003cp\u003eThe 3\/8\" low-profile pitch with .043\" gauge produces reduced vibration and smoother feeding on lighter saws compared with full-profile chains. The semi-chisel tooth shape cuts efficiently through green and dry wood while the low-kickback design reduces the likelihood of violent tip reactions. Together, these specs suit pruning, firewood splitting, and yard cleanup when paired with the proper powerhead.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3\/8\"LP pitch: gentler feed and lower vibration on small saws.\u003c\/li\u003e\n  \u003cli\u003e.043\" gauge: compatible with many consumer saw nose sprockets and bars.\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel, low-kickback cutters: balanced cutting speed and safer operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Savior 16\" bar and chain kit is aimed at homeowners, landscapers, and part-time loggers using compact or mid-size gas and cordless chainsaws who need a durable, ready-to-install replacement. It’s especially useful if you want a complete spare kit (two chains plus storage) to minimize downtime while maintaining consistent cutting performance across a variety of compatible saw brands.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this bar and chain compatible with ECHO CS310?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 16\" ECHO models that accept a 3\/8\"LP, .043\" gauge, 56DL bar with an A041 tail mount and 7-tooth sprocket nose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included gloves cut-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The included XL gloves are for handling only and are not cut-resistant; use certified protective gear for cutting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54207892488376,"sku":"B0DHZKQ77S","price":108.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-16in-bar-front-view_c007ff53-58ff-473d-a124-d825d85f7573.jpg?v=1790657443"},{"product_id":"savior-20-inch-chainsaw-bar-2-chain-combo-tail-mount-20-inch-bar-3-8-in-pitch-050-gauge-70dl-full-chisel","title":"Savior 20-inch Chainsaw Bar \u0026 2-Chain Combo — Tail-Mount 20-inch Bar, 3\/8 in Pitch .050 Gauge, 70DL Full-Chisel","description":"\u003cstrong\u003eSavior’s 20\" chainsaw bar and dual-chain combo is a replacement guide bar and two full-chisel chains built to fit many small- to mid-size saws, including Echo CS-590 and CS-600 models.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit pairs a reversible 20-inch guide bar with two 3\/8\" pitch, .050\" gauge, 70-drive-link full-chisel chains and accessories so you can get back to cutting without hunting for individual parts. The bar uses a tail-mount design with a 9-tooth sprocket nose and replaces common Oregon part numbers such as 200PXDD176 and 27850. Savior treats rivets with heat and quench processes and ships bar and chains with protective oil to resist corrosion and improve durability.\u003c\/p\u003e\n\n\u003ch3\u003eWhat dimensions and specifications does this bar and chain set use?\u003c\/h3\u003e\n\u003cp\u003eThe guide bar is 20 inches long, tail-mount D176, with a 9-tooth sprocket nose. Each chain is 3\/8\" pitch with a .050\" gauge and 70 drive links, built in a full-chisel cutter profile for aggressive cutting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuide bar length: 20\" (tail mount D176)\u003c\/li\u003e\n  \u003cli\u003eSprocket nose: 9 teeth\u003c\/li\u003e\n  \u003cli\u003eChain size: 3\/8\" pitch, .050\" gauge, 70 drive links\u003c\/li\u003e\n  \u003cli\u003eChain type: full-chisel cutters for faster bite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich saws and part numbers will this Savior combo replace?\u003c\/h3\u003e\n\u003cp\u003eThis kit is made as a direct fit for saws that accept Oregon 200PXDD176 \/ 27850-style bars and equivalent chains. It lists compatibility with many consumer and light-commercial brands, making it a convenient cross-reference replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEcho: CS-451, CS-452, CS-500EVL, CS-501EVL, CS-590, CS-600, CS500, CST-610\u003c\/li\u003e\n  \u003cli\u003ePoulan Pro and other consumer saw models (e.g., 203, 245, 306 series)\u003c\/li\u003e\n  \u003cli\u003eJohn Deere, Craftsman, McCulloch, Tanaka, RedMax, Skil and more\u003c\/li\u003e\n  \u003cli\u003eCompatible with Oregon combo part numbers 200PXDD176 and 27850\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the package and how does the construction help durability?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the bar, two replacement chains, storage bags, gloves, and a protective bar cover so you receive a ready-to-install replacement and basic accessories. Savior applies protective oil to the bar and chains and uses heat-treated, quenched rivets to strengthen link connections, improving wear resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 guide bar, 2 saw chains, 2 storage bags, 1 pair gloves (XL), 1 bar cover\u003c\/li\u003e\n  \u003cli\u003eRivets: heat-treated and quenched for stronger link joints\u003c\/li\u003e\n  \u003cli\u003eFinish: protective oil coating to resist rust during storage\u003c\/li\u003e\n  \u003cli\u003eBar: lightweight, reversible design for easy handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I choose this bar and chain over other replacements?\u003c\/h3\u003e\n\u003cp\u003ePick this Savior combo if you want a complete replacement that matches the same pitch, gauge, drive link count, and nose-sprocket configuration as widely used Oregon-style bars. The inclusion of two chains and storage accessories reduces downtime and provides a spare for extended cutting sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChoose if your saw accepts 20\" tail-mount bars and 70DL 3\/8\"\/.050\" chains\u003c\/li\u003e\n  \u003cli\u003eGood value when you want a spare chain included\u003c\/li\u003e\n  \u003cli\u003eHandy for homeowners and light commercial users needing quick field swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Savior 20\" bar and chain combo suits homeowners, landscapers, and small-scale contractors who operate Echo, Poulan Pro, John Deere, Craftsman, Tanaka and similar saws that use Oregon 200PXDD176\/27850-compatible bars. It’s designed for users who want a ready-to-install replacement with an extra chain and protective accessories, offering a balance of aggressive cutting performance and parts longevity without searching multiple part numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bar and chain fit my Echo CS-590?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 20\" D176 tail-mount bar and 3\/8\" .050\" 70DL chain is compatible with Echo CS-590 when your saw uses Oregon 200PXDD176\/27850-style bars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement chains included and how many?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes two full-chisel chains, so you have a spare ready for extended cutting sessions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54207892619448,"sku":"B0F4MV7HW8","price":125.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-guide-bar-front-packaging.jpg?v=1790657444"},{"product_id":"savior-18-chainsaw-bar-and-2-replacement-chains-3-8-lp-050-62dl-a041-guide-bar-low-kickback","title":"Savior 18\" Chainsaw Bar and 2 Replacement Chains — 3\/8\" LP .050\" 62DL, A041 Guide Bar, Low-Kickback","description":"\u003cstrong\u003eSavior's 18\" guide bar and dual replacement chains give small-to-mid-size saw owners a heat-treated, low-kickback cutting system compatible with EGO CS1800, Echo CS-300 series, and many other popular models.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need a ready-to-install bar and spare chains for routine trimming, storm cleanup or light commercial work, this Savior kit supplies an 18\" A041-style guide bar plus two semi-chisel 3\/8\" LP chains (.050\" gauge, 62 drive links). The components are built for durability: rivets are heat-treated and quenched, and the metal surfaces ship with protective oil to reduce corrosion and break-in wear. The set also includes practical accessories so you can carry, protect and handle the equipment safely between jobs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws will this 18\" bar and chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis Savior A041 guide bar and 3\/8\" low-profile chains are engineered to replace common OEM 18\" bars and fit a wide range of electric and petrol saws that accept A041 tail mounts. Confirm compatibility by matching pitch, gauge and drive-link count with your saw's manual before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits EGO CS1800 and CS1804 models\u003c\/li\u003e\n  \u003cli\u003eCompatible with Echo CS280, CS290, CS300 and many CS-series saws\u003c\/li\u003e\n  \u003cli\u003eWorks with select DeWalt, Black \u0026amp; Decker, Husqvarna, Oregon, Poulan, McCulloch and Homelite models\u003c\/li\u003e\n  \u003cli\u003eBar specs: A041 tail mount, 7-tooth sprocket nose, 18\" length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are the chains and bar constructed for longevity?\u003c\/h3\u003e\n\u003cp\u003eSavior focuses on connection strength and abrasion resistance. Each chain’s rivets undergo heat treatment and quenching to reinforce link joints, while bars and chains are finished with a protective oil coating to limit rust and smooth initial break-in.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-chisel cutters for reliable cutting and easier maintenance\u003c\/li\u003e\n  \u003cli\u003eHeat-treated, quenched rivets for stronger link connections\u003c\/li\u003e\n  \u003cli\u003eProtective factory oil to resist corrosion and reduce wear at first use\u003c\/li\u003e\n  \u003cli\u003eLow-kickback design to help control rebound forces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what else do I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives as a ready-to-use combination: an 18\" guide bar, two identical replacement chains, storage bags, a protective bar cover and gloves. You’ll only need a compatible saw, basic chain tensioning tools and bar oil to start cutting safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 18\" A041 guide bar\u003c\/li\u003e\n  \u003cli\u003e2 x 3\/8\" LP, .050\" gauge, 62DL semi-chisel chains\u003c\/li\u003e\n  \u003cli\u003e2 x storage bags and 1 bar cover for transport\u003c\/li\u003e\n  \u003cli\u003e1 pair of XL work gloves (not cut-resistant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners, landscapers and light commercial users who operate small-to-mid-size chainsaws and want an affordable, durable replacement bar plus spare chains will find this Savior kit convenient. It’s tailored for people who need quick compatibility checks with A041-style tail mounts and prefer a semi-chisel, low-kickback chain for routine pruning, firewood cutting and property maintenance. Always verify your saw’s pitch, gauge and drive-link requirements before fitting, and follow manufacturer safety guidelines when installing or servicing chainsaw components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bar fit Echo CS-300?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the A041 18\" bar is compatible with Echo CS-300 series models listed by the manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What chain specs should I check before buying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match pitch 3\/8\" LP, gauge .050\", and 62 drive links plus the A041 tail mount to ensure fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Savior","offers":[{"title":"Default Title","offer_id":54207892652216,"sku":"B0DHZJHKV9","price":113.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/savior-18in-guide-bar-front-view.jpg?v=1790657443"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/savior-18in-guide-bar-front-view.jpg?v=1790679954","url":"https:\/\/canadianlawn.ca\/collections\/savior.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}