{"title":"Pool Mate","description":"\u003cp\u003eBrowse 47 Pool Mate products at Canadian Lawn, including pool \u0026amp; spa water balance and pool safety, ladders \u0026amp; lighting. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"pool-mate-pool-stabilizer-cyanuric-acid-4-lb-fast-dissolving-uv-chlorine-protector-easy-dose","title":"Pool Mate Pool Stabilizer (Cyanuric Acid) 4 lb — Fast-Dissolving UV Chlorine Protector, Easy Dose","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 4-Pounds Premium Pool Stabilizer and Conditioner is a cyanuric acid treatment that helps protect chlorine from sunlight and prolongs its effectiveness in outdoor pools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003ePool Mate stabilizer (cyanuric acid) dissolves quickly to build the protective layer around free chlorine that slows degradation from UV light. Use it when filling a new pool, after a drain and refill, or whenever tests show low stabilizer levels. Proper dosing maintains the recommended 40–100 ppm cyanuric acid range so your chlorine stays active longer and your maintenance schedule becomes more predictable.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I add Pool Mate stabilizer to a newly filled or unstabilized pool?\u003c\/h3\u003e\n\n\u003cp\u003eAdd Pool Mate slowly into your skimmer or pre-dissolve in warm water and pour the solution into the skimmer; avoid dumping large amounts in one spot. Run the filter continuously for 24 hours to fully dissolve the product and circulate stabilizer evenly. Verify levels with a reliable test kit and adjust as needed to reach the 40–100 ppm target.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNew\/refilled pool dose: 4 oz per 1,000 gallons for initial treatment to reach 40–100 ppm.\u003c\/li\u003e\n  \u003cli\u003eRecirculate water 24 hours after addition for full dissolution.\u003c\/li\u003e\n  \u003cli\u003eUse a test kit to confirm cyanuric acid concentration before and after treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much Pool Mate should I use to raise cyanuric acid by a specific amount?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate’s concentration lets you predict dosing: 6 ounces of product raises cyanuric acid roughly 10 ppm per 5,000 gallons. Use this conversion to calculate the precise amount required for your pool volume and desired ppm increase. Always add stabilizer gradually and retest after full circulation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6 oz ≈ 10 ppm increase per 5,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eScale doses linearly by pool volume; smaller pools need proportionally less product.\u003c\/li\u003e\n  \u003cli\u003eAdjust in steps if you’re close to the upper 100 ppm limit to avoid over-stabilizing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Pool Mate change my chlorine or pH maintenance routine?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate does not replace chlorine; it helps chlorine remain effective longer by reducing UV breakdown. Maintain a free chlorine residual of 2.0–4.0 ppm and pH between 7.4–7.6 for best results. If stabilizer levels are already high, you may need to manage chlorine differently—regular testing keeps both stabilizer and sanitizer balanced.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eKeep free chlorine at 2.0–4.0 ppm for routine sanitation.\u003c\/li\u003e\n  \u003cli\u003eTarget pool pH 7.4–7.6 to optimize sanitizer performance.\u003c\/li\u003e\n  \u003cli\u003eRetest cyanuric acid after treatment and monitor periodically, especially after heavy dilution or rain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply Pool Mate for safe, even distribution?\u003c\/h3\u003e\n\n\u003cp\u003eFor best dissolution, add Pool Mate slowly into the skimmer while the pump runs, or dissolve it first in a bucket of warm water and then pour into the skimmer. Ensure the filter is clean before treatment to avoid recirculating debris with the stabilizer. Continuous filtration for 24 hours prevents localized high concentrations and ensures uniform protection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdd product gradually to the skimmer while the pump runs.\u003c\/li\u003e\n  \u003cli\u003eOr premix in warm water and then add for faster dissolution.\u003c\/li\u003e\n  \u003cli\u003eRun filtration nonstop for at least 24 hours after application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 4-Pounds Premium Pool Stabilizer and Conditioner is designed for outdoor pool owners and maintenance professionals who want to reduce chlorine loss from sunlight and extend the effective life of their sanitizer. It’s ideal for newly filled pools, seasonal refills, and routine cyanuric acid adjustments in residential and commercial settings. Always use test kits and follow dosing charts to keep stabilizer levels between 40 and 100 ppm and maintain proper chlorine and pH ranges for safe, well-balanced water.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How quickly does Pool Mate dissolve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dissolves rapidly with continuous filtration; run the pump 24 hours for full dissolution.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the safe cyanuric acid range?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Aim for 40–100 ppm cyanuric acid; test and adjust accordingly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194065604792,"sku":"B0F7CBD6LG","price":60.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging.jpg?v=1790568859"},{"product_id":"pool-mate-ph-up-for-swimming-pools-5-lb-sodium-carbonate-fast-acting-ph-booster","title":"Pool Mate pH Up for Swimming Pools — 5 lb Sodium Carbonate, Fast-Acting pH Booster","description":"\u003cstrong\u003ePool Mate 5-Pounds Premium pH Up is a sodium carbonate formula designed to quickly raise and stabilize pool pH to the ideal 7.4–7.6 range.\u003c\/strong\u003e\n\n\u003cp\u003eKeeping pool water in the target pH window protects surfaces, improves sanitizer performance, and delivers more comfortable swimming. This 5-pound container of Pool Mate pH Up is a concentrated, fast-acting alkalinity booster intended for routine pH corrections. Follow test results and label instructions for safe, effective use; never add product directly to the pool without pre-dissolving.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate pH Up safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eTest the pool water first; if pH is 7.2 or below, pre-dissolve the measured amount in a plastic pail of water. With the circulation system running, slowly pour the dissolved solution around the pool perimeter and run the pump for at least one hour before retesting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure pH with a reliable test kit before adding product.\u003c\/li\u003e\n  \u003cli\u003ePre-dissolve recommended dosage in a plastic bucket, not metal.\u003c\/li\u003e\n  \u003cli\u003ePour slowly around the pool while the pump circulates water.\u003c\/li\u003e\n  \u003cli\u003eWait one hour, then retest; repeat if pH remains low until 7.4–7.6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of using sodium carbonate pH Up?\u003c\/h3\u003e\n\u003cp\u003eRaising pH helps reduce corrosion and surface etching while optimizing sanitizer efficiency and swimmer comfort. Pool Mate sodium carbonate works quickly to correct acidic water without adding excessive calcium or other minerals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps prevent metal corrosion and finish deterioration.\u003c\/li\u003e\n  \u003cli\u003eSupports chlorine by keeping it within its effective pH range.\u003c\/li\u003e\n  \u003cli\u003eImproves swimmer comfort by reducing eye and skin irritation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much should I add and how often should I test?\u003c\/h3\u003e\n\u003cp\u003eDosage depends on pool volume and current pH; start with the included label chart and adjust gradually. Test pH after each treatment and as part of your regular pool maintenance schedule—at least weekly during heavy use or warm weather.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the product chart to calculate amounts for your pool size.\u003c\/li\u003e\n  \u003cli\u003eAdd in stages, retesting after each application to avoid overshooting pH.\u003c\/li\u003e\n  \u003cli\u003eTest weekly and after heavy rain, high bather load, or chemical shocks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I combine this product with other pool chemicals right away?\u003c\/h3\u003e\n\u003cp\u003eDo not mix chemicals directly; always add chemicals separately and allow circulation time between additions. After using Pool Mate pH Up, wait and retest pH before adding chlorine or other treatments to ensure balanced water chemistry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNever mix dry chemicals together; pre-dissolve individually when required.\u003c\/li\u003e\n  \u003cli\u003eAllow at least one hour of circulation and then retest before further additions.\u003c\/li\u003e\n  \u003cli\u003eFollow label guidance for sequencing with algaecides, clarifiers, and sanitizers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 5-Pounds Premium pH Up is designed for residential and small commercial pool owners, maintenance pros, and caretakers who need a reliable, fast-acting pH increaser. It’s most useful for anyone who regularly tests pool chemistry and wants a concentrated, easy-to-store option to correct low pH and protect pool investment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until pH adjusts after adding this product?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Circulate for at least one hour, then retest; repeat process if pH is still low.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add the powder directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—pre-dissolve in a plastic pail before slowly pouring while the circulation system runs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194067013816,"sku":"B00J7L45BS","price":59.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-5lb.jpg?v=1790568899"},{"product_id":"pool-mate-pool-stabilizer-cyanuric-acid-1-75-lb-fast-dissolving-made-in-usa-for-outdoor-pools","title":"Pool Mate Pool Stabilizer (Cyanuric Acid) 1.75 lb — Fast‑Dissolving, Made in USA for Outdoor Pools","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 1.75-Pound Pool Stabilizer is a cyanuric acid conditioner that protects and extends the life of chlorine in outdoor pools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen sunlight rapidly breaks down free chlorine, a pool stabilizer (cyanuric acid) slows that loss so your sanitizer remains effective longer. Pool Mate’s 1.75-pound formula is made in the USA and designed to dissolve quickly, letting you raise cyanuric acid (CYA) levels to the recommended range of 40–100 ppm. Use alongside routine testing and proper pH and chlorine maintenance for best results.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will Pool Mate dissolve and take effect?\u003c\/h3\u003e\n\u003cp\u003ePool Mate disperses rapidly when added correctly and will begin stabilizing chlorine as it dissolves in the pool circulation. For fast dissolution, add slowly into the skimmer or premix in warm water before pouring into the skimmer, and run filtration continuously for 24 hours to ensure full distribution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremix in a pail of warm water for easier dissolution.\u003c\/li\u003e\n  \u003cli\u003eAdd slowly into the skimmer to prevent settling.\u003c\/li\u003e\n  \u003cli\u003eRun the pump 24 hours after application for complete mixing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much Pool Mate should I use to reach the recommended cyanuric acid level?\u003c\/h3\u003e\n\u003cp\u003eFollow the included chart and a reliable test kit to determine current CYA and the amount needed. As a guideline, 6 ounces of Pool Mate raises cyanuric acid about 10 ppm per 5,000 gallons; for a pool with no stabilizer, add 4 oz per 1,000 gallons to reach typical target ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ounces ≈ +10 ppm CYA per 5,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eNew or refilled pools: 4 ounces per 1,000 gallons as a starting dose.\u003c\/li\u003e\n  \u003cli\u003eAlways confirm with a test kit and adjust slowly to avoid overshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using Pool Mate change my chlorine and pH maintenance routine?\u003c\/h3\u003e\n\u003cp\u003ePool Mate reduces chlorine loss from sunlight, which can lower weekly chlorine consumption by up to about 25%, but you still must maintain proper sanitizer and pH levels. Keep free chlorine between 2.0–4.0 ppm and pH between 7.4–7.6 for optimal swimmer comfort and sanitizer performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTarget free chlorine: 2.0–4.0 ppm at all times.\u003c\/li\u003e\n  \u003cli\u003eTarget pH: 7.4–7.6 to balance comfort and sanitizer efficiency.\u003c\/li\u003e\n  \u003cli\u003eMonitor CYA regularly; stay within 40–100 ppm for outdoor pools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I add Pool Mate to my pool for safe, even distribution?\u003c\/h3\u003e\n\u003cp\u003eAdd the stabilizer slowly to avoid concentrated pockets and to aid dissolution. Use the skimmer for direct introduction or dissolve the product in warm water before adding; ensure the filter is clean and recirculate water continuously for 24 hours to dissolve completely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure the filter is clean before adding product.\u003c\/li\u003e\n  \u003cli\u003eAdd slowly into the skimmer or premix then pour in the skimmer.\u003c\/li\u003e\n  \u003cli\u003eRun the pump continuously for at least 24 hours after application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 1.75-Pound Pool Stabilizer is best for owners of outdoor residential pools who want to reduce chlorine loss from sunlight and extend the effective life of their sanitizer. It suits new or refilled pools that need an initial cyanuric acid boost, pool owners looking to decrease chlorine consumption, and anyone who follows routine testing and maintenance. Use it with a reliable CYA test kit and maintain recommended chlorine and pH ranges for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate raises cyanuric acid per gallon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 6 ounces raises CYA about 10 ppm per 5,000 gallons; use the included chart for exact dosing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add Pool Mate directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—add slowly to the skimmer or premix in warm water, and run the pump 24 hours to dissolve fully.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194167709880,"sku":"B00J3JMG7O","price":42.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_b9781365-4149-4cd0-b641-02e5713b9bda.jpg?v=1790570511"},{"product_id":"pool-mate-metal-remover-for-spas-hot-tubs-1-pint-16-oz-non-phosphorous-prevents-staining","title":"Pool Mate Metal Remover for Spas \u0026 Hot Tubs, 1-Pint (16 oz) — Non‑Phosphorous, Prevents Staining","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 1-Pint Premium Metal Gone is a non-phosphorous liquid treatment that removes dissolved metals and prevents metal staining and corrosion in hot tubs and spas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen filling or refilling a spa, dissolved metals such as iron, copper and manganese in source water can cause discoloration, staining and accelerate equipment corrosion. Pool Mate's Metal Gone is formulated for spas and hot tubs to bind and clear metals safely without adding phosphates. It works quickly when added to circulating water and is compatible with standard hot tub maintenance routines.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Metal Gone when filling or refilling my spa?\u003c\/h3\u003e\n\u003cp\u003eAdd the product directly to the spa while the circulation pump runs so the liquid disperses evenly. Use one pint (16 oz.) for every 625 gallons of spa water and run circulation for at least 30 minutes to allow the treatment to sequester metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure spa capacity and calculate pints needed (1 pint per 625 gallons).\u003c\/li\u003e\n  \u003cli\u003eAdd 16 oz. around the waterline while pump is on.\u003c\/li\u003e\n  \u003cli\u003eRun circulation for 30 minutes to mix and activate the treatment.\u003c\/li\u003e\n  \u003cli\u003eProceed with normal sanitizer and water balance after treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of metals and problems does this product address?\u003c\/h3\u003e\n\u003cp\u003ePool Mate Metal Gone targets common dissolved metals—such as iron, copper and manganese—that can discolor water, stain surfaces and promote corrosion on fittings. It sequesters metals so they remain dissolved and can be filtered out or drained when appropriate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSequesters iron, copper and manganese from fill water.\u003c\/li\u003e\n  \u003cli\u003eReduces risk of brown, green or blue stains on spa surfaces.\u003c\/li\u003e\n  \u003cli\u003eHelps protect pumps and heaters from metal-related corrosion.\u003c\/li\u003e\n  \u003cli\u003eNon-phosphorous formulation avoids adding nutrients to the water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product affect my sanitizer or water balance?\u003c\/h3\u003e\n\u003cp\u003eMetal Gone is designed to be compatible with standard hot tub chemicals when used as directed. Add the metal remover first during fill or refill, circulate, then test and adjust pH, alkalinity and sanitizer levels before regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd during fill\/refill before adjusting sanitizer levels.\u003c\/li\u003e\n  \u003cli\u003eCirculate for 30 minutes, then test pH and sanitizer.\u003c\/li\u003e\n  \u003cli\u003eAdjust water balance as needed; follow your sanitizer manufacturer's instructions.\u003c\/li\u003e\n  \u003cli\u003eSafe for periodic preventative use to reduce staining risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 1-Pint Premium Metal Gone is intended for spa and hot tub owners, service technicians and property managers who refill or top off water and want a preventative, non-phosphorous solution to reduce metal staining and protect equipment. It’s especially useful for locations with high-metal source water or where visible discoloration has been a recurring issue. Use it as part of routine filling procedures to minimize maintenance, protect finishes and prolong component life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Metal Gone do I add for my spa?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add 1 pint (16 oz.) of Pool Mate Metal Gone for every 625 gallons of spa water while the pump is running.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long should I circulate after adding Metal Gone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Run the circulation pump for at least 30 minutes to assure even distribution and activation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194187206840,"sku":"B00IX3RA1S","price":43.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-metal-gone.jpg?v=1790570920"},{"product_id":"pool-mate-metal-remover-sequestrant-1-quart-concentrated-metal-free-for-stain-prevention-rust-removal","title":"Pool Mate Metal Remover Sequestrant — 1-Quart Concentrated Metal Free for Stain Prevention \u0026 Rust Removal","description":"\u003cp\u003e\u003cstrong\u003ePool Mate Metal Free is a concentrated 1-quart sequestrant that prevents and removes metal stains and discoloration from pools, protecting surfaces and equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool water shows faint browning, green, or rusty hues after filling or during the season, dissolved metals like iron, copper, manganese and others are often the cause. Pool Mate Metal Free is formulated to bind those metals and keep them dissolved so they don’t precipitate onto plaster, vinyl or pool hardware. It’s designed for initial fills, stain correction, and routine maintenance to reduce scale, rust and staining without changing your normal filtration setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Metal Free when filling a new or refilled pool?\u003c\/h3\u003e\n\u003cp\u003eAdd Metal Free while the pool is filling and before adding chlorine so metallic contaminants are sequestered immediately. Use one quart per 10,000 gallons for the initial fill; this prevents metals from reacting and discoloring the water or surfaces. Follow up with normal water balancing and sanitization once sequestering is complete.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDosage: 1 quart per 10,000 gallons during fill\u003c\/li\u003e\n  \u003cli\u003eAdd before chlorine to avoid premature reactions\u003c\/li\u003e\n  \u003cli\u003eCirculate water with the pump while filling for even distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I do to clear an already discolored pool?\u003c\/h3\u003e\n\u003cp\u003eTo treat colored water caused by metals, close the pool to swimmers and stop chlorine until residuals reach zero. Lower pH to about 6.8 to re-dissolve metal deposits, add one quart per 10,000 gallons of Metal Free, and run the filter overnight or until water clears. When clear, rebalance pH to 7.2–7.8 and resume regular chlorination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClose pool and run filter continuously during treatment\u003c\/li\u003e\n  \u003cli\u003eLower pH to 6.8 to help dissolve metal deposits\u003c\/li\u003e\n  \u003cli\u003eAdd 1 quart per 10,000 gallons and allow overnight circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I add Metal Free for seasonal upkeep?\u003c\/h3\u003e\n\u003cp\u003eMetal Free is useful at opening and closing and can be dosed monthly to compensate for losses from backwashing or splash-out. A maintenance dose is typically one quart per 20,000 gallons once each month. Regular use helps keep metals sequestered so they won’t form stains or scale on pool surfaces and equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse at season start and end for protection\u003c\/li\u003e\n  \u003cli\u003eMonthly maintenance: 1 quart per 20,000 gallons\u003c\/li\u003e\n  \u003cli\u003eRe-dose after heavy backwashing or significant water loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich metals does this product target and how does it protect the pool?\u003c\/h3\u003e\n\u003cp\u003ePool Mate Metal Free targets a broad range of dissolved metals — including iron, copper, manganese, calcium and more — by chelating them so they remain in solution rather than depositing as stains. By keeping metals suspended, the product reduces the risk of rust, scale and staining on plaster, tile, liners and plumbing. It’s a general-purpose sequestrant suitable for many common municipal and well-water contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on iron, copper, manganese, calcium, cobalt, lead, nickel and silver\u003c\/li\u003e\n  \u003cli\u003eHelps prevent rust, scale and surface staining\u003c\/li\u003e\n  \u003cli\u003eProtects plumbing, tiles and pool walls from mineral deposits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate Metal Free is intended for pool owners, service professionals and maintenance crews who want a reliable, concentrated sequestrant to prevent or clear metal-related staining. It’s appropriate for plaster, vinyl and fiberglass pools and is especially useful when filling from municipal or well sources that may contain dissolved metals. Use it at openings, closings, during staining incidents, and as part of routine monthly maintenance to preserve water clarity and protect pool finishes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Metal Free with chlorine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add Metal Free before chlorine during fills; when correcting stains, reduce chlorine to zero first and resume after treatment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the correct maintenance dose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For routine maintenance add one quart per 20,000 gallons monthly, and after backwashing or splash-out as needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194227085496,"sku":"B00J3JMF9I","price":57.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-metal-free-front-label.jpg?v=1790571735"},{"product_id":"pool-mate-metal-remover-1-quart-concentrated-sequestrant-for-pool-stain-prevention","title":"Pool Mate Metal Remover 1-Quart Concentrated Sequestrant for Pool Stain Prevention","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 1-Quart Concentrated Metal Out is a liquid metal sequestrant that removes and prevents metal stains and discoloration in swimming pools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether your water shows brown, green or rusty tints after filling or after heavy rain, Pool Mate Metal Out binds metals and keeps them suspended so they won't stain plaster, vinyl or piping. This concentrated formula works for initial fills, seasonal openings and routine maintenance, and is compatible with normal filtration and chlorine-based sanitation once levels are restored.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate Metal Out to treat newly filled pool water?\u003c\/h3\u003e\n\u003cp\u003eFor a fresh fill where metals are suspected, add the product while the pool is filling so it mixes uniformly. Use the recommended dosing rate and avoid adding chlorine until after the treatment has been applied.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd 1 quart per 10,000 gallons during filling for initial protection\u003c\/li\u003e\n  \u003cli\u003eIntroduce the liquid directly to flowing water or near a return jet for even dispersion\u003c\/li\u003e\n  \u003cli\u003eDelay chlorination until after the sequestrant is in the water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps fix already discolored or stained pool water?\u003c\/h3\u003e\n\u003cp\u003eIf your pool water has turned colored from metals, isolate swimmers and stop adding chlorine so levels fall. Lower the pH briefly to help dissolve and free metals, dose with the metal remover, run the pump overnight, then rebalance pH and return to normal sanitizing routines once clear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClose pool to swimmers and run filtration continuously\u003c\/li\u003e\n  \u003cli\u003eAllow chlorine to drop to zero before treating\u003c\/li\u003e\n  \u003cli\u003eLower pH to help re-dissolve metals, then add 1 quart per 10,000 gallons and circulate\u003c\/li\u003e\n  \u003cli\u003eAfter clarity returns, raise pH to 7.2–7.8 and resume normal chlorination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I add this sequestrant during the season?\u003c\/h3\u003e\n\u003cp\u003ePool Mate Metal Out is useful at openings, closings and as part of monthly maintenance if backwashing or heavy splash-out lowers its concentration. Regular small additions keep metals from accumulating and reduce stain risk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonthly maintenance dose: 1 quart per 20,000 gallons to replenish after backwash or splash-out\u003c\/li\u003e\n  \u003cli\u003eUse at every seasonal opening and closing to protect surfaces and plumbing\u003c\/li\u003e\n  \u003cli\u003eRe-dose as needed when metal traces reappear or water clarity declines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Pool Mate 1-Quart Concentrated Metal Out is designed for pool owners, service technicians and property managers who need a practical, concentrated solution to prevent and correct metal-related water discoloration and staining. It’s suitable for concrete, vinyl and fiberglass pools and for anyone seeking a simple maintenance step to protect pool finishes and equipment from metal stains while keeping filtration and sanitization routines intact.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I swim immediately after using Pool Mate Metal Out?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Wait until pH is rebalanced and chlorine residual reaches 1.0–3.0 ppm before swimming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it remove all types of metals in my pool water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It sequesters common metals like iron, copper, manganese and calcium to prevent stains and discoloration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194274861240,"sku":"B0CWW73YXV","price":56.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label.jpg?v=1790572787"},{"product_id":"pool-mate-pool-stabilizer-4-pound-rapid-dissolve-cyanuric-acid-extends-chlorine-life","title":"Pool Mate Pool Stabilizer 4-Pound Rapid-Dissolve Cyanuric Acid — Extends Chlorine Life","description":"\u003cstrong\u003ePool Mate 4-Pounds Premium Pool Stabilizer and Conditioner is a concentrated cyanuric acid formula that stabilizes pool chlorine to slow sunlight-driven loss and extend disinfectant life.\u003c\/strong\u003e\n\n\u003cp\u003eIf your pool loses chlorine quickly on sunny days, adding a stabilizer helps protect the sanitizer so it remains effective longer. Pool Mate's 4-pound cyanuric acid product dissolves rapidly, lets you bring pool stabilizer levels into the recommended 40–100 ppm range, and is designed for straightforward application through the skimmer or pre-dissolved in warm water. Follow a reliable test kit and the included dosage chart to reach target concentration, and maintain free chlorine and pH for proper sanitation.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does Pool Mate dissolve and start protecting chlorine?\u003c\/h3\u003e\n\u003cp\u003ePool Mate is formulated for fast dispersion when added to a clean filter system and recirculated. After introduction via the skimmer (or premixed in warm water), recirculate continuously for 24 hours to ensure full dissolution and even distribution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRapid-dissolve cyanuric acid granules for faster mixing\u003c\/li\u003e\n  \u003cli\u003eRecirculate water 24 hours for complete dissolution\u003c\/li\u003e\n  \u003cli\u003eAdd slowly to skimmer or premix to avoid cloudiness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dose will bring my pool into the recommended 40–100 ppm range?\u003c\/h3\u003e\n\u003cp\u003eUse a reliable test kit to determine current cyanuric acid. For pools with no stabilizer, Pool Mate recommends 4 oz per 1,000 gallons to begin raising levels; follow the included chart to adjust to the desired 40–100 ppm range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew or freshly filled pools: start with 4 oz per 1,000 gallons\u003c\/li\u003e\n  \u003cli\u003e6 ounces raises cyanuric acid by about 10 ppm per 5,000 gallons\u003c\/li\u003e\n  \u003cli\u003eAdjust dosage incrementally and retest after full circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I add this stabilizer to my pool for best results?\u003c\/h3\u003e\n\u003cp\u003ePour slowly into the skimmer while the pump is running, or premix in a pail of warm water and then add to the skimmer. Make sure the filter is clean and keep the pump running to distribute the product evenly throughout the system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEither direct-to-skimmer or premix in warm water are acceptable\u003c\/li\u003e\n  \u003cli\u003eEnsure a clean filter to prevent cloudiness and improve dissolution\u003c\/li\u003e\n  \u003cli\u003eContinuous recirculation for 24 hours ensures full distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill adding Pool Mate change my routine chlorine or pH maintenance?\u003c\/h3\u003e\n\u003cp\u003ePool Mate stabilizes chlorine so you’ll typically use less sanitizer for the same protection, but you must still maintain recommended chlorine and pH ranges. Keep free chlorine at 2.0–4.0 ppm and pH between 7.4–7.6 for optimal performance and swimmer comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces chlorine loss from sunlight and can lower sanitizer consumption up to about 25%\u003c\/li\u003e\n  \u003cli\u003eContinue to monitor and maintain free chlorine at 2.0–4.0 ppm\u003c\/li\u003e\n  \u003cli\u003eKeep pH stable at 7.4–7.6 for chlorine efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 4-Pounds Premium Pool Stabilizer and Conditioner is intended for pool owners and service professionals who want a reliable cyanuric acid product to protect chlorine from UV breakdown. It’s especially useful for outdoor residential pools exposed to sunlight, newly filled pools that need a stabilizer baseline, or anyone seeking to reduce frequent chlorine top-ups while maintaining proper sanitizer levels. Always use a test kit and follow the dosage chart for safe, effective results.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCyanuric acid for pools\u003c\/li\u003e\n  \u003cli\u003eHelps reduce chlorine loss\u003c\/li\u003e\n  \u003cli\u003eRecommended cyanuric acid level is 40-100 ppm\u003c\/li\u003e\n  \u003cli\u003e6 ounces raises cyanuric acid level 10 ppm per 5,000 gallons of water\u003c\/li\u003e\n  \u003cli\u003eIncreases cyanuric acid level\u003c\/li\u003e\n  \u003cli\u003eDecreases chlorine loss due to sunlight\u003c\/li\u003e\n  \u003cli\u003eReduce chlorine consumption up to 25%\u003c\/li\u003e\n  \u003cli\u003eImproves the effectiveness of chlorine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate do I add to a new pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add 4 oz per 1,000 gallons for a new or refillled pool, then retest and adjust to 40–100 ppm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I premix Pool Mate before adding it to the skimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Premix in warm water, then add to the skimmer and run the pump for 24 hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194350555320,"sku":"B00J7L47HA","price":55.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_47c3849a-7fd4-487c-a40e-dc0f1b93fb1a.jpg?v=1790574093"},{"product_id":"pool-mate-phosphate-remover-for-pools-1-quart-32-oz-fast-acting-compatible-with-all-sanitizers","title":"Pool Mate Phosphate Remover for Pools — 1 Quart (32 oz), Fast-Acting, Compatible with All Sanitizers","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 1-Quart Premium Phosphate Remover is a fast-acting treatment that reduces phosphate levels in pools to help limit algae food and improve sanitizer performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003ePhosphates enter pools from rain, lawn fertilizers, soaps, and other contaminants and act as nutrients for algae, forcing higher sanitizer use. This 32 oz (1-quart) formula from Pool Mate is made in the USA and formulated to work with all sanitizing systems. Used routinely or as a corrective treatment, it helps bring phosphate readings down so your sanitizer and filtration can work more efficiently.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will I see phosphate levels drop?\u003c\/h3\u003e\n\u003cp\u003ePhosphate Remover starts binding and precipitating phosphates shortly after application, but measurable results depend on pool size, circulation, and current phosphate concentration. For typical maintenance doses you should see reduced phosphate readings after filtration runs and retesting 24–36 hours later.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply with filter running for 24–36 hours to circulate the product.\u003c\/li\u003e\n  \u003cli\u003eRetest phosphate levels after filtration and cleaning.\u003c\/li\u003e\n  \u003cli\u003eFollow with a pool shock and vacuuming for best clarity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I dose the product for weekly maintenance or an algae issue?\u003c\/h3\u003e\n\u003cp\u003eFor routine prevention, use 1 ounce of Pool Mate Phosphate Remover per 5,000 gallons to maintain phosphates at or below 100 ppb. If algae is present, treat the algae first with an algaecide (such as Pool Mate 90 Day Algae Erase), test phosphate levels, then apply the stronger corrective dose per the product dosing chart.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintenance: 1 oz per 5,000 gallons weekly when no algae is present.\u003c\/li\u003e\n  \u003cli\u003eIf algae present: treat algae, test phosphates, then follow corrective chart dosing.\u003c\/li\u003e\n  \u003cli\u003eAlways add slowly around pool edge and in front of returns; run filter continuously.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my pool’s sanitizer and filter system?\u003c\/h3\u003e\n\u003cp\u003eYes — the formula is compatible with all common pool sanitizers and pool types. It is designed to be used alongside standard sanitization and filtration routines; pairing it with a clarifier and a filter cleaner improves effectiveness by removing phosphate residues from the filter and increasing clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe to use with chlorine, bromine, and other sanitizers.\u003c\/li\u003e\n  \u003cli\u003eRecommended to use with Pool Mate Clarifier to boost filter efficiency.\u003c\/li\u003e\n  \u003cli\u003eFollow up with Pool Mate Filter Cleaner to remove trapped phosphates from filter media.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps should I take after applying this phosphate remover?\u003c\/h3\u003e\n\u003cp\u003eAfter adding the product, run your filtration system for 24–36 hours, then shock the pool, brush surfaces, and vacuum to waste if possible. Monitor filter pressure and backwash or clean as required; retest phosphates to confirm the treatment lowered levels to the desired range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRun filter 24–36 hours after application.\u003c\/li\u003e\n  \u003cli\u003eShock the pool, brush, and vacuum to clear precipitated particles.\u003c\/li\u003e\n  \u003cli\u003eClean or backwash filter and retest phosphate concentration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 1-Quart Premium Phosphate Remover is aimed at pool owners and service professionals who want to control phosphate-based nutrient buildup that can feed algae and impede sanitizer efficiency. It’s practical for weekly maintenance in residential pools, corrective treatments when phosphate or algae spikes occur, and for anyone looking to optimize filtration and reduce sanitizer consumption without changing their sanitizer type.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I use Pool Mate Phosphate Remover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use 1 ounce per 5,000 gallons weekly for maintenance; increase per dosing chart if phosphates are high or algae appears.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe with my chlorine or bromine sanitizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The formula is compatible with all common sanitizers and pool types when used according to directions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194529206456,"sku":"B0F79V4F1C","price":69.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-quart-front-label.jpg?v=1790576933"},{"product_id":"pool-mate-spa-metal-remover-1-pint-non-phosphorus-treatment-to-prevent-stains-corrosion","title":"Pool Mate Spa Metal Remover 1 Pint — Non‑Phosphorus Treatment to Prevent Stains \u0026 Corrosion","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 1‑Pint Premium Metal Remover is a non‑phosphorous treatment that locks up dissolved metals and helps prevent staining and corrosion in hot tubs and spas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen filling or refilling a spa, metals such as iron, copper and manganese dissolved in source water can cause discoloration, staining or accelerated equipment corrosion over time. Pool Mate’s metal remover is formulated to treat metal ions before they oxidize and deposit on shell surfaces, equipment or heater elements. It is designed for routine use at start‑up and when new water is added, offering an easy first line of defense that integrates with your regular circulation and balancing routine.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate metal remover when refilling a spa?\u003c\/h3\u003e\n\u003cp\u003eAdd the product steadily around the waterline while the circulation system is running so the treatment disperses quickly. Dosage is straightforward and tailored to the spa volume; after adding, allow the pump to run to mix the solution thoroughly before further chemical adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure spa volume to determine dosage (see label guidance).\u003c\/li\u003e\n  \u003cli\u003eAdd 16 fl oz (1 pint) of product per 625 gallons of spa water around the line.\u003c\/li\u003e\n  \u003cli\u003eRun the circulation pump continuously for at least 30 minutes to ensure distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich metals does this product address and what does it prevent?\u003c\/h3\u003e\n\u003cp\u003eThe formula binds common dissolved metals—like iron, copper and manganese—reducing their ability to oxidize and stain surfaces. By sequestering metal ions, it helps protect shell finishes, plumbing and heater components from staining and metal‑related corrosion risks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTargets typical well and municipal source metals.\u003c\/li\u003e\n  \u003cli\u003eHelps minimize brown, green or blue\/green stains on surfaces.\u003c\/li\u003e\n  \u003cli\u003eReduces metal buildup that can impair heaters and pipes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this affect my sanitizer or water balance?\u003c\/h3\u003e\n\u003cp\u003ePool Mate’s metal remover is non‑phosphorous and is formulated to work alongside normal spa chemistry without replacing sanitizer or pH control steps. After treating for metals and circulating, test and adjust sanitizer, pH and alkalinity as usual to maintain safe, comfortable water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDoes not substitute for chlorine, bromine, or other sanitizers.\u003c\/li\u003e\n  \u003cli\u003eUse metal remover first when filling, then test and balance water.\u003c\/li\u003e\n  \u003cli\u003eCompatible with routine spa maintenance when used per instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I use the metal remover?\u003c\/h3\u003e\n\u003cp\u003eUse it whenever you add fresh water—such as after a drain and refill—or when testing indicates dissolved metals are present. Regular application at refill helps prevent staining before it starts, while spot treatments can be applied if metal staining appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary use: during initial fill or refill of the spa.\u003c\/li\u003e\n  \u003cli\u003eRepeat as needed based on source water or test results.\u003c\/li\u003e\n  \u003cli\u003eFollow label dosing for each refill to maintain protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 1‑Pint Premium Metal Remover is intended for spa and hot tub owners, service technicians and property managers who refill water regularly or use well source water with potential metal content. It’s especially useful for anyone seeking a preventative treatment to reduce staining and protect equipment—ideal for residential spa users, rental properties, and small commercial spa settings. Use it as part of a comprehensive water‑care routine that includes sanitizer and pH\/alkalinity management for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate do I add for my spa?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add 16 fl oz (1 pint) for every 625 gallons of spa water, poured around the waterline while the pump runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this product with my sanitizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use it when filling or refilling, then test and adjust your sanitizer, pH and alkalinity as normal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54194730795192,"sku":"B0CWVWH5JF","price":57.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-1-pint.jpg?v=1790578493"},{"product_id":"pool-mate-liquid-pool-flocculant-1-quart-drop-down-clarifier-rapid-settling-easy-vacuum-removal","title":"Pool Mate Liquid Pool Flocculant 1-Quart Drop-Down Clarifier — Rapid Settling, Easy Vacuum Removal","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 1-Quart Premium Drop Down Liquid Flocculant is a concentrated clarifier that gathers suspended particles and drops them to the pool floor so you can vacuum them away.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen pools go cloudy from fine organic and inorganic debris, a targeted liquid flocculant can accelerate clearing by agglomerating microscopic particles into larger clumps that settle. Pool Mate's drop-down formula is designed for routine maintenance or to tackle heavy turbidity. Follow filter-type instructions and pH guidance for best results and to minimize time spent waiting for sediments to settle.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Pool Mate work to clear cloudy water?\u003c\/h3\u003e\n\u003cp\u003eThe active ingredients attract and bind suspended particles, forming heavier aggregates that fall out of suspension. After treatment, those solids collect on the pool floor where you remove them by vacuuming to waste or through filter maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBonds fine organic and inorganic particles into larger flocs\u003c\/li\u003e\n  \u003cli\u003eCauses particles to descend rapidly to the pool bottom\u003c\/li\u003e\n  \u003cli\u003eMakes physical removal by vacuum or filter backwash straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps should I follow for cartridge filter pools?\u003c\/h3\u003e\n\u003cp\u003ePrepare to vacuum to waste because cartridge filters can clog when handling the heavy sediment that results. Confirm pool pH is 7.2 or higher, brush surfaces after dosing, and leave settled solids 24–72 hours before removal for safest operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjust pH to 7.2 or above before application\u003c\/li\u003e\n  \u003cli\u003eFor very cloudy pools: turn pump off, pour about 4 fl oz per 5,000 gallons evenly, then brush walls and steps\u003c\/li\u003e\n  \u003cli\u003eWait 24–72 hours for floc to settle, then vacuum to waste with the filter cartridge removed\u003c\/li\u003e\n  \u003cli\u003eClean cartridge if filter pressure rises beyond normal operating range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use it with sand or D.E. filters?\u003c\/h3\u003e\n\u003cp\u003eThe procedure emphasizes vacuuming to waste and monitoring filter pressure. Run the pump while you vacuum until sediment is gone, and backwash as needed to restore normal flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWith pump off, prepare to vacuum to waste, then start pump and slowly vacuum heavy sediment\u003c\/li\u003e\n  \u003cli\u003eAllow normal filtration for at least 24 hours after vacuuming\u003c\/li\u003e\n  \u003cli\u003eIf filter pressure climbs, backwash or service the filter before continuing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often and how much should I use for maintenance?\u003c\/h3\u003e\n\u003cp\u003ePool Mate can be used weekly to help prevent cloudiness or applied as a spot treatment after storms, heavy bather loads, or when fine debris accumulates. Small, routine doses keep water clearer with less labor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintenance dose: 1 ounce per 5,000 gallons into the skimmer or around the perimeter while circulation runs\u003c\/li\u003e\n  \u003cli\u003eHeavier treatment: approximately 4 ounces per 5,000 gallons for very turbid water\u003c\/li\u003e\n  \u003cli\u003eAlways follow filter-type steps and monitor pressure after use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool Mate 1-Quart Premium Drop Down Liquid Flocculant is aimed at pool owners and service pros who want a straightforward, concentrated clarifier for both routine upkeep and rapid treatment of cloudy or turbid pools. It suits residential pools with cartridge, sand, or D.E. filters, and is especially helpful when you can vacuum to waste or perform filter maintenance. If you prefer low-touch options like extended circulation only, consider combining this product with regular filtration and brushing to maximize clarity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Pool Mate with my cartridge filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—adjust pH to 7.2+, use 4 oz per 5,000 gallons for heavy cloudiness, let floc settle 24–72 hours, then vacuum to waste and clean the cartridge.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much should I add for weekly maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add 1 ounce per 5,000 gallons into the skimmer or around the pool perimeter while the circulation system is running.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54195009323192,"sku":"B00J3JLW2O","price":64.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label_42e338c6-7d58-4fa2-ab40-ce4f70afcbbc.jpg?v=1790580908"},{"product_id":"pool-mate-alkalinity-increaser-for-pools-10-lb-sodium-bicarbonate-fast-dissolve-to-stabilize-ph-and-prevent-scale","title":"Pool Mate Alkalinity Increaser for Pools, 10 lb Sodium Bicarbonate — Fast-Dissolve to Stabilize pH and Prevent Scale","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 10-Pounds Premium Alkalinity Increaser is a sodium bicarbonate formula designed to raise and stabilize total alkalinity in residential swimming pools quickly and predictably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping total alkalinity in range prevents pH fluctuations that can lead to scale, corrosion, and surface etching while making sanitizers work more consistently. This concentrated 10 lb product dissolves readily, is simple to apply with the pump running, and includes dose guidance based on pool volume and current alkalinity readings. Use alongside a reliable test kit and follow target ranges for your pool type to ensure balanced water: fiberglass 70–100 ppm, marcite\/painted\/tile\/exposed aggregate 80–120 ppm, and vinyl 120–140 ppm.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Pool Mate alkalinity increaser help my pool water?\u003c\/h3\u003e\n\n\u003cp\u003eAlkalinity increaser acts as a buffer that reduces rapid pH swings and preserves the effectiveness of chlorine and other disinfectants. By raising total alkalinity to the recommended range, you protect plaster, metal fittings, and pool equipment from damage related to unstable chemistry.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStabilizes pH to reduce \"pH bounce\" and frequent adjustments.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain sanitizer performance for clearer water.\u003c\/li\u003e\n  \u003cli\u003eMinimizes scale formation and metal corrosion on surfaces and equipment.\u003c\/li\u003e\n  \u003cli\u003eDissolves quickly for straightforward application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much product should I add and how do I apply it?\u003c\/h3\u003e\n\n\u003cp\u003eAdditions are based on pool volume and the difference between current and target alkalinity. With the pump running, broadcast the measured amount directly into the deep end or near return jets for faster dispersion, then retest after several hours. The package table shows approximate dosing; for example, 11 ounces raises alkalinity about 10 ppm in 5,000 gallons.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAlways test total alkalinity before treating the pool.\u003c\/li\u003e\n  \u003cli\u003eApply with circulation running to disperse evenly.\u003c\/li\u003e\n  \u003cli\u003eWait several hours and retest before adding more product.\u003c\/li\u003e\n  \u003cli\u003eUse the product’s dosing table for accurate additions by gallon capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product affect my pool’s pH or equipment?\u003c\/h3\u003e\n\n\u003cp\u003eBecause Pool Mate uses sodium bicarbonate, it primarily raises alkalinity with minimal immediate pH change; however, correcting large alkalinity deficits can influence pH and should be followed by pH testing. Keeping alkalinity in range helps protect surfaces and metal components by preventing corrosive or scaling conditions that stress equipment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned to raise total alkalinity while limiting sudden pH swings.\u003c\/li\u003e\n  \u003cli\u003ePrevents corrosion of metal fittings and damage to plaster finishes.\u003c\/li\u003e\n  \u003cli\u003eSafe for all common pool types when used as directed.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce the need for frequent acid or base corrections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly will I see results and how often should I test?\u003c\/h3\u003e\n\n\u003cp\u003eAlkalinity changes are measurable within hours after treatment once the product disperses; retest after 4–8 hours and again 24 hours later to confirm stability. Regular testing—weekly during heavy use or after rain and chemical adjustments—keeps conditions within recommended ranges and prevents recurring problems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRetest 4–8 hours after application for initial results.\u003c\/li\u003e\n  \u003cli\u003eConfirm stability after 24 hours before making further adjustments.\u003c\/li\u003e\n  \u003cli\u003eTest weekly under normal conditions and after major events.\u003c\/li\u003e\n  \u003cli\u003eUse a reliable total alkalinity test kit for accurate dosing decisions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 10-Pounds Premium Alkalinity Increaser is ideal for residential pool owners, maintenance professionals, and property managers seeking a reliable, easy-to-use sodium bicarbonate product to stabilize total alkalinity. It’s suited for all common pool surfaces—fiberglass, plaster, tile, aggregate, and vinyl—and for anyone who wants to reduce pH fluctuations, protect equipment, and improve sanitizer efficiency without complex procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add Pool Mate directly to the pool water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. With the pump running, broadcast the product into the deep end or near return jets and retest alkalinity after several hours.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much alkalinity will 11 ounces raise?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Approximately 10 ppm in 5,000 gallons of pool water when mixed and circulated properly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54195817218232,"sku":"B00J7L45DQ","price":76.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-10lb-front-packaging.jpg?v=1790585782"},{"product_id":"pool-mate-calcium-hardness-increaser-for-pools-8-lb-fast-dissolving-granular-calcium-chloride-to-protect-surfaces","title":"Pool Mate Calcium Hardness Increaser for Pools, 8 lb — Fast-Dissolving Granular Calcium Chloride to Protect Surfaces","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 8-Pounds Premium Calcium Hardness Increaser is a dry granular calcium chloride formula that safely raises your pool's calcium hardness to recommended levels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping the right calcium hardness helps protect pool surfaces and equipment from the damaging effects of soft water. This product is a fast-dissolving granular calcium chloride designed to bring total hardness into the ideal range for vinyl, tile, exposed aggregate, marcite, fiberglass and painted pools. Use a dependable test kit to measure current hardness, then follow the dosage chart and mixing instructions to avoid overcorrection.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know when my pool needs calcium hardness added?\u003c\/h3\u003e\n\n\u003cp\u003eTest your pool water with a reliable calcium hardness test kit. If readings fall below the suggested ranges for your pool type, add Pool Mate Calcium Hardness Increaser in measured amounts and retest after circulation. Low hardness can contribute to faster wear of surfaces and corrosion of metal fittings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVinyl pools: aim for 200–300 ppm\u003c\/li\u003e\n  \u003cli\u003eTile\/exposed aggregate: aim for 200–400 ppm\u003c\/li\u003e\n  \u003cli\u003eMarcite, fiberglass, painted: aim for 250–400 ppm\u003c\/li\u003e\n  \u003cli\u003eRetest after full circulation and adjust in small increments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the correct way to add this granular calcium chloride?\u003c\/h3\u003e\n\n\u003cp\u003eDissolve the measured granules in a plastic bucket prefilled with pool water before adding to the pool. Mix up to 2 pounds of product per 5-gallon bucket of water, then pour the solution slowly around the pool perimeter while the pump runs to distribute evenly. Never broadcast dry granules directly into the pool.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse only plastic buckets to dissolve product\u003c\/li\u003e\n  \u003cli\u003eMix up to 2 lb per 5-gallon bucket for safe dissolution\u003c\/li\u003e\n  \u003cli\u003ePour slowly around the pool with pump\/circulation active\u003c\/li\u003e\n  \u003cli\u003eLimit dosing to 10 lb per 10,000 gallons every two hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much will this 8-pound package change my pool’s hardness?\u003c\/h3\u003e\n\n\u003cp\u003eThe product label provides a dosing chart, but a general rule is useful: 8 ounces of this calcium chloride will raise calcium hardness by about 10 ppm in 5,000 gallons of water. Use the chart for precise correction based on your pool volume, and add gradually to avoid overshooting the target range.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e8 oz raises hardness ~10 ppm per 5,000 gallons\u003c\/li\u003e\n  \u003cli\u003eCalculate pool volume to determine exact dose\u003c\/li\u003e\n  \u003cli\u003eAdd in increments and retest after circulation\u003c\/li\u003e\n  \u003cli\u003eFollow the two-hour, 10 lb per 10,000 gallon safety guideline\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any safety or compatibility considerations?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate calcium chloride is formulated for pools but must be handled with care. Wear gloves and eye protection when measuring and dissolving. Verify compatibility with your pool surface and follow manufacturer guidance for plaster and other sensitive finishes to prevent local concentration damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse protective gear when handling the dry product\u003c\/li\u003e\n  \u003cli\u003eAlways pre-dissolve in a plastic bucket to avoid direct contact\u003c\/li\u003e\n  \u003cli\u003eBe cautious with rapid, concentrated additions near plaster or painted areas\u003c\/li\u003e\n  \u003cli\u003eStore dry in a cool, sealed container away from moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool Mate 8-Pounds Premium Calcium Hardness Increaser is intended for pool owners and service professionals who need a reliable, fast-acting way to correct low calcium hardness. It’s suitable for a wide range of pool finishes and sizes when used according to the label instructions, making it a practical option for seasonal maintenance, post-drain refills, or whenever test results show calcium levels below the recommended target.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much does 8 ounces of product raise calcium hardness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 8 ounces raises calcium hardness approximately 10 ppm in 5,000 gallons of water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I pour the granules directly into the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — pre-dissolve in a plastic bucket of pool water and pour slowly with circulation running.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54196591329464,"sku":"B0F7CG76NF","price":68.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_c8d6b92d-929f-4dfe-885f-54d7245feea9.jpg?v=1790587193"},{"product_id":"pool-mate-calcium-hardness-increaser-for-pools-8-lb-granular-calcium-chloride-fast-dissolving","title":"Pool Mate Calcium Hardness Increaser for Pools — 8 lb Granular Calcium Chloride, Fast Dissolving","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 8-pound Calcium Hardness Increaser is a granular calcium chloride formula designed to bring your pool’s calcium hardness into the recommended 200–400 ppm range safely and quickly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMaintaining the correct calcium hardness prevents metal corrosion, surface etching and cloudy water. This dry, free‑flowing granule dissolves when pre‑mixed in water and is applied while the pool pump runs, allowing you to adjust hardness without shocking other water balances. Always verify current hardness with a reliable test kit before adding any chemical, and follow label directions for dosing intervals and maximum additions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know when to add this calcium hardness increaser?\u003c\/h3\u003e\n\n\u003cp\u003eTest your pool’s calcium hardness with a dependable test kit. Vinyl pools typically require lower hardness, while plaster, fiberglass and tile surfaces tolerate or need higher levels. If test results fall below the recommended range for your surface, it’s time to add product.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRecommended ranges: Vinyl 200–300 ppm; Tile\/exposed aggregate 200–400 ppm; Marcite\/fiberglass\/painted 250–400 ppm.\u003c\/li\u003e\n  \u003cli\u003eTest before treating, and recheck after the water fully circulates for several hours.\u003c\/li\u003e\n  \u003cli\u003eAdjust slowly to avoid overshooting the target range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the correct way to mix and add the product to my pool?\u003c\/h3\u003e\n\n\u003cp\u003eDo not broadcast dry granules directly into the pool. Pre‑dissolve the granules in a plastic bucket filled with pool water, creating a slurry you can pour safely around the pool perimeter while the circulation system runs. This helps the product disperse evenly and reduces the risk of concentrated contact with pool surfaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse a plastic bucket and fill it with pool water before adding product.\u003c\/li\u003e\n  \u003cli\u003eUp to 2 pounds per ~5‑gallon bucket of water is recommended for prep.\u003c\/li\u003e\n  \u003cli\u003eSlowly pour the dissolved solution around the pool with the pump operating.\u003c\/li\u003e\n  \u003cli\u003eIn a 10,000‑gallon pool, limit additions to 10 pounds per 2‑hour period to avoid abrupt changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much will 8 pounds change my pool’s calcium hardness?\u003c\/h3\u003e\n\n\u003cp\u003eThe change depends on your pool volume. The product label gives dosing guidance; for quick reference, the product states 8 ounces will raise calcium hardness approximately 10 ppm in 5,000 gallons of water. Use that as a baseline and calculate additions based on your pool’s gallon capacity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e8 ounces ≈ +10 ppm per 5,000 gallons (use proportionally for different volumes).\u003c\/li\u003e\n  \u003cli\u003eCalculate total pounds needed, dissolve in buckets, and add incrementally.\u003c\/li\u003e\n  \u003cli\u003eRetest after full circulation before making further adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any safety or compatibility considerations I should follow?\u003c\/h3\u003e\n\n\u003cp\u003eStore the product dry and sealed, away from moisture and incompatible chemicals. When handling, avoid inhalation and contact with eyes or metal surfaces. Follow label safety instructions and use protective gloves and eye protection if splashing is possible.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eKeep product in its original container, closed and dry.\u003c\/li\u003e\n  \u003cli\u003eDo not mix with other chemicals directly; always dissolve separately in pool water.\u003c\/li\u003e\n  \u003cli\u003eUse personal protective equipment when preparing the solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 8‑Pound Calcium Hardness Increaser is intended for pool owners and maintenance professionals who need a straightforward, granular calcium source to raise calcium hardness to the appropriate level for their pool surface. It’s suitable for those with vinyl, tile, plaster, exposed aggregate, fiberglass or painted pools who already test water regularly and want controlled, incremental adjustments to avoid surface damage and maintain balanced water chemistry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much product raises calcium hardness 10 ppm?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Approximately 8 ounces will raise calcium hardness by about 10 ppm per 5,000 gallons of pool water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add the granules directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — dissolve in a plastic bucket of pool water first, then pour slowly around the pool while circulating.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54199147266232,"sku":"B00J7L46BC","price":68.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-bag.jpg?v=1790592294"},{"product_id":"pool-mate-cyanuric-acid-pool-stabilizer-and-conditioner-7-lb-container-quick-dissolve-formula-to-protect-outdoor-chlorine","title":"Pool Mate Cyanuric Acid Pool Stabilizer and Conditioner — 7 lb Container, Quick‑Dissolve Formula to Protect Outdoor Chlorine","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 7-Pounds Premium Pool Stabilizer and Conditioner is a cyanuric acid treatment that protects and extends the life of pool chlorine by stabilizing free chlorine levels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping chlorine effective outdoors requires the right stabilizer level to slow sunlight-driven loss. Pool Mate’s 7-pound container supplies concentrated cyanuric acid formulated to dissolve quickly and help maintain a target range of 40–100 ppm. Proper use restores protection after a refill or boosts levels in pools that test low, while following routine filtration and water balance helps the product work as intended.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this stabilizer dissolve and begin working?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate dissolves rapidly when added to flowing water, so its stabilizing effect starts as the cyanuric acid disperses through the circulation system. For best results, add slowly to the skimmer or premix in warm water and run the pump continuously for 24 hours to ensure full dissolution.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCan be added directly to the skimmer or premixed in a pail of warm water.\u003c\/li\u003e\n  \u003cli\u003eContinuous circulation for 24 hours recommended for complete dissolution.\u003c\/li\u003e\n  \u003cli\u003eRapid dispersal helps re-establish chlorine protection quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much do I need to achieve the recommended cyanuric acid level?\u003c\/h3\u003e\n\n\u003cp\u003eDosage depends on current cyanuric acid concentration and pool volume. Use a reliable test kit to measure existing levels and then follow the product’s chart to reach the target 40–100 ppm range. As a general guide, 6 ounces of this cyanuric acid raises the level by about 10 ppm per 5,000 gallons.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTest the water before adding any stabilizer.\u003c\/li\u003e\n  \u003cli\u003e6 ounces increases cyanuric acid ~10 ppm per 5,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eAdd slowly and retest after full circulation to confirm the result.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the correct procedure for adding this conditioner to my pool?\u003c\/h3\u003e\n\n\u003cp\u003eStart with a clean filter and circulating pump running. Add the product slowly into the skimmer or dissolve it in warm water first, then pour into the skimmer. After adding, keep the pump running for 24 hours and recheck cyanuric acid, free chlorine, and pH to make further adjustments if needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEnsure filter is clean and pump is on before dosing.\u003c\/li\u003e\n  \u003cli\u003eAdd product slowly to the skimmer or premix in warm water.\u003c\/li\u003e\n  \u003cli\u003eRecirculate for 24 hours; then test and adjust chlorine and pH.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does using Pool Mate affect chlorine and pH maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eCyanuric acid helps reduce sunlight-driven chlorine loss, helping the sanitizer remain active longer in outdoor pools. It does not replace regular chlorine maintenance — maintain a free chlorine residual of 2.0–4.0 ppm and a pH between 7.4–7.6 for optimal sanitation and swimmer comfort.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStabilizer reduces chlorine degradation from UV exposure.\u003c\/li\u003e\n  \u003cli\u003eKeep free chlorine at 2.0–4.0 ppm for effective disinfection.\u003c\/li\u003e\n  \u003cli\u003eMaintain pH in the 7.4–7.6 range for best sanitizer performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool Mate 7-Pounds Premium Pool Stabilizer and Conditioner is intended for outdoor pool owners and service professionals who need to restore or maintain cyanuric acid levels after filling, dilution, or heavy rainfall. It’s suitable for those who routinely test water chemistry and want a straightforward powdered cyanuric acid to protect chlorine efficacy. Follow testing and dosing instructions carefully to achieve the recommended 40–100 ppm stabilizer range and to keep chlorine and pH within the suggested bands for reliable, consistent pool sanitation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add Pool Mate directly to the pool water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Add slowly to the skimmer or premix in warm water, then run the pump 24 hours and retest cyanuric acid.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much does this raise cyanuric acid levels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Approximately 6 ounces raises cyanuric acid about 10 ppm per 5,000 gallons of water.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54199660544184,"sku":"B0F7CBCZNM","price":82.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_c8a25a15-4cca-4684-aab5-209e9c9dab82.jpg?v=1790597544"},{"product_id":"pool-mate-metal-free-pool-metal-remover-2-pack-1-quart-concentrated-sequestrant-prevents-stains-clarifies-water","title":"Pool Mate Metal Free pool metal remover, 2-pack 1-Quart concentrated sequestrant — prevents stains \u0026 clarifies water","description":"\u003cstrong\u003ePool Mate Metal Free is a concentrated sequestrant that removes and prevents stains and discoloration from iron, copper, manganese and other metals in pool water.\u003c\/strong\u003e\n\nPool Mate Metal Free is formulated to protect pool surfaces and equipment from metal-induced staining and scale while keeping water clear and swimmable. Supplied as a two-pack of 1-quart bottles, this concentrated liquid works during initial fills, seasonal openings\/closings, and routine maintenance to bind dissolved metals so they won’t precipitate onto plaster, tiles, liners, or plumbing. Use it proactively to prevent colored water and staining or as a corrective treatment when metal contamination has already caused discoloration.\n\n\u003ch3\u003eHow do I use Metal Free when filling a new or refilled pool?\u003c\/h3\u003e\n\u003cp\u003eAdd Metal Free into the pool as it is filling to sequester incoming metals before chlorine is introduced. The recommended dose is one quart per 10,000 gallons of water. Adding it during fill prevents metals from oxidizing and staining surfaces once chlorination begins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd one quart per 10,000 gallons while filling and before adding chlorine\u003c\/li\u003e\n  \u003cli\u003eRun the filter to circulate product during fill\u003c\/li\u003e\n  \u003cli\u003eFollow with normal pH and chlorine adjustments after treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps fix water that’s already discolored by metals?\u003c\/h3\u003e\n\u003cp\u003eTreating colored pool water requires removing swimmers, stopping chlorination, lowering pH and running the pump while Metal Free works to re-dissolve and sequester metals. Add one quart per 10,000 gallons, circulate overnight until clarity returns, then rebalance pH and resume normal chlorination before allowing swimming again.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClose pool to swimmers and stop adding chlorine until residual reaches zero\u003c\/li\u003e\n  \u003cli\u003eLower pH to about 6.8 to help re-dissolve metals, then add one quart per 10,000 gallons\u003c\/li\u003e\n  \u003cli\u003eCirculate until clear, then raise pH to 7.2–7.8 and restore chlorine to 1.0–3.0 ppm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I add Metal Free during the season?\u003c\/h3\u003e\n\u003cp\u003ePeriodic additions compensate for product loss from backwashing, splash-out or heavy rainfall. For ongoing protection, dose monthly or after significant water loss: one quart per 20,000 gallons as general maintenance, and one quart per 10,000 gallons after suspected metal recontamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonthly maintenance dose: one quart per 20,000 gallons\u003c\/li\u003e\n  \u003cli\u003eAfter heavy backwash or water loss, re-dose at one quart per 20,000 gallons\u003c\/li\u003e\n  \u003cli\u003eFor suspected contamination or corrective treatment, use one quart per 10,000 gallons\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat metals does this product target and what protection does it provide?\u003c\/h3\u003e\n\u003cp\u003eMetal Free is a broad-spectrum sequestrant that targets common staining metals and helps protect surfaces and equipment. It binds dissolved metals so they remain in solution and can be filtered out, reducing the risk of rust, scale and discoloration on pool walls, finishes and plumbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTargets iron, copper, manganese, calcium and other trace metals\u003c\/li\u003e\n  \u003cli\u003eHelps prevent staining, rust, and scale formation on pool finishes\u003c\/li\u003e\n  \u003cli\u003eHelps protect pumps, heaters and plumbing from mineral deposits\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nPool Mate Metal Free is intended for pool owners, service professionals and facility managers who want to prevent or correct metal-related water discoloration and protect pool finishes and equipment. It suits new fills, seasonal openings\/closings, routine monthly care and corrective treatments after metal contamination. Ideal for pools supplied by well water or municipal sources with known metal content, this concentrated two-pack provides enough product for multiple treatments across medium and large pools when dosed per the directions.\n\n\u003cp\u003e\u003cem\u003eUse as directed on the label. Do not swim until the pool’s chlorine residual returns to recommended levels and water balance is restored.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I swim immediately after using Metal Free?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Wait until chlorine residual is 1.0–3.0 ppm and water is rebalanced before swimming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Metal Free do I add for routine monthly maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add one quart of Metal Free per 20,000 gallons once each month to maintain protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200013062328,"sku":"B00IXRXXN8","price":87.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-1-quart-bottle.jpg?v=1790605225"},{"product_id":"pool-mate-7-pound-pool-stabilizer-cyanuric-acid-conditioner-fast-dissolving-with-dosing-chart","title":"Pool Mate 7-Pound Pool Stabilizer \u0026 Cyanuric Acid Conditioner — Fast-Dissolving with Dosing Chart","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 7-Pounds Premium Pool Stabilizer and Conditioner is a cyanuric acid powder designed to slow chlorine degradation and keep your pool disinfectant working longer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping chlorine effective in outdoor pools means protecting it from sunlight and rapid breakdown. Pool Mate’s cyanuric acid formula dissolves quickly and raises stabilizer levels so you can maintain a consistent chlorine residual. The product comes with dosing guidance and a chart so you can reach the recommended 40–100 ppm range, and it’s suitable for newly filled pools or regular maintenance top-ups.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this stabilizer work once added to my pool?\u003c\/h3\u003e\n\u003cp\u003ePool Mate dissolves rapidly when added properly and the pool pump is running; most of the product disperses within 24 hours with continuous circulation. For best results, add slowly to the skimmer or pre-dissolve in warm water, ensure a clean filter, and keep the pump running continuously until fully dissolved.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-dissolve option: mix in a pail of warm water then pour into skimmer\u003c\/li\u003e\n  \u003cli\u003eDirect addition: add slowly to the skimmer while pump runs\u003c\/li\u003e\n  \u003cli\u003eRecirculation: run filter continuously for 24 hours to finish dissolution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much Pool Mate do I need to reach the right cyanuric acid level?\u003c\/h3\u003e\n\u003cp\u003eThe product includes a chart for exact dosing; general guidance is provided for new or stabilizer-free pools. As a rule of thumb, add 4 ounces per 1,000 gallons to begin raising cyanuric acid toward the target 40–100 ppm range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew or refilled pools: start with 4 oz per 1,000 gallons\u003c\/li\u003e\n  \u003cli\u003eAdjustment measurement: use a reliable test kit to verify ppm\u003c\/li\u003e\n  \u003cli\u003eFine tuning: follow the included chart to reach desired ppm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this product change chlorine maintenance and water chemistry?\u003c\/h3\u003e\n\u003cp\u003eBy raising cyanuric acid, Pool Mate reduces the rate at which sunlight breaks down free chlorine, helping you hold a steady disinfectant level longer. Continue to monitor and maintain free chlorine and pH for proper sanitation and swimmer comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain chlorine residual: recommended 2.0–4.0 ppm\u003c\/li\u003e\n  \u003cli\u003eMaintain pH: recommended 7.4–7.6 for optimal performance\u003c\/li\u003e\n  \u003cli\u003eTest regularly: use a reliable cyanuric acid and chlorine test kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specific dosing details and product properties should I know?\u003c\/h3\u003e\n\u003cp\u003ePool Mate is measured so small quantities change cyanuric acid concentration predictably: for example, 6 ounces of product raises cyanuric acid by about 10 ppm in 5,000 gallons. Use the product chart, test before and after dosing, and avoid over-stabilizing the water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ounces ≈ raises cyanuric acid 10 ppm per 5,000 gallons\u003c\/li\u003e\n  \u003cli\u003eTarget stabilizer range: 40–100 ppm for outdoor pools\u003c\/li\u003e\n  \u003cli\u003eAlways verify results with a test kit after treating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 7-Pounds Premium Pool Stabilizer and Conditioner is ideal for pool owners with outdoor, sun-exposed pools who want to protect chlorine from UV breakdown. It’s especially useful for newly filled pools, pools that test low in cyanuric acid, or anyone seeking an easy-to-use powdered stabilizer to reduce chemical consumption and maintain consistent sanitizer levels. If you regularly monitor chlorine and pH and follow the included dosing chart, this product helps simplify stabilizer management without complicated procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does Pool Mate take to dissolve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: With the pump running and a clean filter, Pool Mate typically dissolves within 24 hours.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What cyanuric acid level should I aim for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Aim for 40–100 ppm cyanuric acid; use a test kit and the included chart to get there.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200139677880,"sku":"B0F7C9WRJP","price":82.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label_49158795-c438-46ac-94af-e4e58bd8621b.jpg?v=1790607979"},{"product_id":"pool-mate-metal-remover-for-hot-tubs-2-pack-1-pint-each-non-phosphorous-filter-safe-spa-treatment","title":"Pool Mate Metal Remover for Hot Tubs 2-Pack (1 pint each) — Non‑Phosphorous, Filter‑Safe Spa Treatment","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 1-Pint Metal Remover (2-pack) is a non-phosphorous treatment formulated to capture and remove dissolved metals from spa and hot tub water to help reduce staining and corrosion risk.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you fill or refill a spa, minerals and metals in source water — such as iron, copper, and manganese — can discolor surfaces, leave deposits, or accelerate equipment wear. Pool Mate Metal Remover offers a simple, dose-based approach: add measured pints to circulating water to bind metals so they can be filtered and eliminated, without introducing phosphates into your system.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I dose Pool Mate Metal Remover for my hot tub?\u003c\/h3\u003e\n\u003cp\u003eDosing is straightforward and designed around spa volume. For every 625 gallons of water, add one pint (16 ounces) around the waterline while the pump is running. After adding, keep the circulation running for at least 30 minutes so the formula disperses and the filter can capture bound metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd 16 fl oz per 625 gallons of spa water.\u003c\/li\u003e\n  \u003cli\u003eDispense evenly around the waterline with the pump on.\u003c\/li\u003e\n  \u003cli\u003eRun circulation for a minimum of 30 minutes after treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product harm my spa equipment or upset water balance?\u003c\/h3\u003e\n\u003cp\u003ePool Mate Metal Remover is formulated for spa use and is non-phosphorous, which helps avoid adding nutrients that can fuel algae. Used at recommended dosages it is designed to be compatible with common spa sanitizers and filtration systems. Always follow routine water testing and adjust pH and sanitizer levels as needed after treatment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-phosphorous formulation minimizes additional nutrients.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard spa sanitizers when used correctly.\u003c\/li\u003e\n  \u003cli\u003eMaintain normal testing and balancing routines post-treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly will I see results and what should I do after adding it?\u003c\/h3\u003e\n\u003cp\u003eVisible improvement depends on the metal concentration and water clarity; lighter discoloration may clear after one treatment, while heavier staining could need filtration or additional doses. After treating and running circulation, check the filter and clean or backwash if it becomes loaded with captured particles. Repeat dosing on refills or when metal presence is suspected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLight issues may clear after a single treatment.\u003c\/li\u003e\n  \u003cli\u003eClean or backwash filters after particles accumulate.\u003c\/li\u003e\n  \u003cli\u003eTreat newly filled spas proactively to prevent staining.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use Pool Mate Metal Remover in all types of spas and water sources?\u003c\/h3\u003e\n\u003cp\u003eThis product is intended for hot tubs and portable spas filled from municipal or well sources where metals are present. It works with most filtration and circulation setups but is not a substitute for physical cleaning of severe metal stains already set into surfaces—those may need specific stain removal products or professional attention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for hot tubs and portable spas with typical filtration.\u003c\/li\u003e\n  \u003cli\u003eUse on initial fills or whenever metals are suspected in source water.\u003c\/li\u003e\n  \u003cli\u003eStubborn, set-in stains may require separate stain removers or service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 1-Pint Metal Remover (2-pack) is aimed at spa owners, installers, and service technicians who want a practical, low-maintenance way to reduce metal-related staining and corrosion risk during fills or refills. It’s especially useful for properties fed by well water or municipal supplies with known iron, copper, or manganese content, and for anyone who prefers a non-phosphorous preventative treatment to protect surfaces and equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate do I add per spa refill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add 1 pint (16 fl oz) for every 625 gallons of spa water, poured around the waterline with the pump running.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long should I run the pump after adding the metal remover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Run the circulation for at least 30 minutes to disperse the product and allow the filter to capture bound metals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200247713976,"sku":"B0CWWGVZNK","price":74.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-1pint-bottle.jpg?v=1790609065"},{"product_id":"pool-mate-metal-free-metal-remover-2-pack-1-quart-concentrated-sequestrant-for-iron-copper-stain-prevention","title":"Pool Mate Metal Free Metal Remover 2-Pack 1-Quart | Concentrated Sequestrant for Iron \u0026 Copper Stain Prevention","description":"\u003cp\u003e\u003cstrong\u003ePool Mate Metal Free is a concentrated liquid sequestrant that removes and prevents metal staining and discoloration in pools caused by iron, copper, manganese and other metals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re filling a pool from a well, troubleshooting discolored water, or protecting pool surfaces and equipment during the season, this concentrated formula binds dissolved metals and keeps them from oxidizing into stains. The two 1-quart bottles provide treatment for routine maintenance and corrective use, helping preserve clear water and reduce unsightly staining on plaster, vinyl and metal fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Metal Free when filling a new or drained pool?\u003c\/h3\u003e\n\u003cp\u003eFor initial fills or after draining, add Metal Free as the pool fills and before adding chlorine. Use one quart for every 10,000 gallons of pool water to chelate metals in the supply and minimize the chance of staining.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd while filling and prior to chlorination.\u003c\/li\u003e\n  \u003cli\u003eDosage: 1 quart per 10,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eCirculate water after dosing to distribute the sequestrant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps fix a pool that’s already discolored by metals?\u003c\/h3\u003e\n\u003cp\u003eCorrecting colored water requires stopping chlorination, lowering pH to re-dissolve metals, treating with Metal Free, and circulating until clear. After the metals are sequestered and the water clears, restore pH and recommence normal sanitization before swimming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClose the pool and run the filter pump continuously.\u003c\/li\u003e\n  \u003cli\u003eAllow chlorine to fall to zero, then lower pH to about 6.8.\u003c\/li\u003e\n  \u003cli\u003eAdd 1 quart per 10,000 gallons and circulate overnight or until clarity returns.\u003c\/li\u003e\n  \u003cli\u003eRebalance pH to 7.2–7.8 and resume standard chlorination (1.0–3.0 ppm) before swimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I add Metal Free for routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eTo protect against metal carryover from backwashing, splash-out or fresh water additions, add Metal Free monthly at a lower maintenance rate. This helps keep metals sequestered and prevents gradual staining and scale buildup on surfaces and equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintenance dose: 1 quart per 20,000 gallons, once each month.\u003c\/li\u003e\n  \u003cli\u003eRe-dose after heavy rainfall, major water top-ups, or after substantial backwashing.\u003c\/li\u003e\n  \u003cli\u003eUse seasonally during openings and closings as a preventative measure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat metals does Pool Mate Metal Free target and what does it protect?\u003c\/h3\u003e\n\u003cp\u003eMetal Free targets a broad range of dissolved metals that commonly cause staining and discoloration. By binding these minerals, it helps protect pool plaster, vinyl liners, metal hardware and plumbing from rust, stains and scale formation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEffective against iron, copper, manganese, calcium, lead, nickel, cobalt and silver.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent rust stains on fixtures and walls.\u003c\/li\u003e\n  \u003cli\u003eReduces scale formation linked to mineral deposits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate Metal Free 1-Quart 2-Pack is designed for pool owners, service technicians and property managers who want a reliable sequestrant to prevent and remedy metal-related staining. It’s especially useful for pools filled from well water or municipal sources with known mineral content, and for anyone seeking routine protection of pool surfaces and plumbing throughout the swim season.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 quart per 10,000 gallons for initial treatment\u003c\/li\u003e\n  \u003cli\u003eRemoves and helps prevent iron, copper, manganese and other metals\u003c\/li\u003e\n  \u003cli\u003eGeneral-purpose sequestrant that protects plumbing, walls and equipment\u003c\/li\u003e\n  \u003cli\u003eUse at openings, closings and periodically during the season\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eUsage note:\u003c\/em\u003e Follow label directions for safe handling and exact dosing. For corrective treatments, follow the multi-step process of reducing chlorine, lowering pH, treating with Metal Free, circulating until clear, then rebalancing pH and sanitizers before allowing swimmers back into the pool.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add Metal Free while chlorinating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add Metal Free while filling and before chlorine. For corrective treatment, let chlorine drop to zero first, then treat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Metal Free do I use monthly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use 1 quart per 20,000 gallons once a month for routine maintenance and after major water loss.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200296669368,"sku":"B0CWVRVDF9","price":87.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label_2200895a-8d28-4463-ba02-0925cb96a61f.jpg?v=1790610352"},{"product_id":"pool-mate-metal-out-pool-metal-remover-1-quart-concentrate-chelates-iron-manganese-prevents-stains","title":"Pool Mate Metal Out pool metal remover, 1-Quart concentrate — chelates iron \u0026 manganese, prevents stains","description":"\u003cstrong\u003ePool Mate Premium Metal Out is a concentrated metal chelator that removes and prevents iron, manganese and other mineral staining and scale in pools.\u003c\/strong\u003e\n\nPool Mate Premium Metal Out is formulated to chelate complex minerals commonly found in municipal and well water so they won't react with oxidizers or leave stains on plaster, tile, and liners. This ready-to-use, power-concentrated formula is designed to be added before other chemicals during openings, used to clear discolored water, and applied regularly to inhibit scale and mineral precipitation without interfering with chlorine, algaecides, or stabilizers.\n\n\u003ch3\u003eHow do I use Pool Mate Metal Out when opening a new pool?\u003c\/h3\u003e\n\u003cp\u003eAdd the product before any other chemical treatments to prevent trace metals from causing discoloration once chlorine is introduced. Treat the pool immediately after filling, then recirculate to ensure even distribution and ease later chemical balancing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd 1.5 oz per 1,000 gallons before other chemicals\u003c\/li\u003e\n  \u003cli\u003eRun filter and pump until product is evenly mixed\u003c\/li\u003e\n  \u003cli\u003eAfter recirculation, proceed with normal chlorine and stabilizer additions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I do if my pool water is discolored by metals?\u003c\/h3\u003e\n\u003cp\u003eHave a dealer or test kit determine whether iron or manganese is the cause; dosing depends on concentration. For under 1 ppm, use the standard 1.5 oz per 1,000 gallons; increase proportionally for higher metal levels and maintain circulation while the chelator works.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTest water for iron and manganese first\u003c\/li\u003e\n  \u003cli\u003eUse 1.5 oz per 1,000 gallons for \u0026lt;1 ppm metals\u003c\/li\u003e\n  \u003cli\u003eScale dose upward proportionally for higher metal readings\u003c\/li\u003e\n  \u003cli\u003eAdjust pH to 7.2–7.6 after treatment for optimal results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan Pool Mate Metal Out prevent scale and mineral buildup?\u003c\/h3\u003e\n\u003cp\u003eYes — regular application helps stop mineral precipitation and scale that can form after adding other pool chemicals. Use a maintenance dose each week to keep calcium and other hardness minerals dispersed and reduce deposits on surfaces and equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFor scale removal: add 0.75 oz per 1,000 gallons and recirculate at least 6 hours\u003c\/li\u003e\n  \u003cli\u003eFor weekly prevention: add 1–2 oz per 5,000 gallons each week\u003c\/li\u003e\n  \u003cli\u003eCompatible with chlorine, algaecides, and stabilizers when added separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product safe to use with other pool chemicals?\u003c\/h3\u003e\n\u003cp\u003ePool Mate Premium Metal Out is formulated not to interfere with common pool sanitizers and treatments when added separately. Do not premix with other chemicals; always add this product on its own and allow full recirculation before introducing additional treatments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not mix directly with other chemicals\u003c\/li\u003e\n  \u003cli\u003eAllow full recirculation before adding chlorine or shock\u003c\/li\u003e\n  \u003cli\u003eWorks alongside algaecides and stabilizers without adverse interaction\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nPool Mate Premium Metal Out is intended for pool owners, service professionals, and dealers who manage municipal, well, or fill-water supplies prone to iron, manganese, and other heavy metals. It's suitable for new pool fills, clearing metal-stained or discolored water, and ongoing maintenance to prevent scale build-up on plaster, tile, liners, and equipment. Use it when you want a concentrated, made-in-USA solution that integrates with standard pool care routines and reduces the risk of staining after chlorination.\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate Metal Out do I add for weekly maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add 1–2 ounces per 5,000 gallons each week to help prevent mineral precipitation and scale.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this product affect my chlorine levels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it won't interfere with chlorine when added separately; always recirculate before adding chlorine.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200361910456,"sku":"B0CWVSLQYZ","price":75.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label_e438a657-244d-4694-8b67-6ce477345699.jpg?v=1790611829"},{"product_id":"pool-mate-ph-up-for-swimming-pools-10-lb-sodium-carbonate-ph-raiser-fast-acting-alkalinity-boost","title":"Pool Mate pH Up for Swimming Pools — 10 lb Sodium Carbonate pH Raiser, Fast-Acting Alkalinity Boost","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 10-Pounds Premium pH Up is a sodium carbonate formula designed to raise and stabilize swimming pool pH quickly and safely when levels read low.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping your pool pH in the optimal range prevents equipment damage, improves sanitizer performance, and makes water more comfortable for swimmers. This 10-pound container of Pool Mate pH Up provides a concentrated, easy-to-use source of alkalinity boost. Follow pool test results and the included dosing chart for stepwise adjustments; the product dissolves in a plastic pail and is introduced around the pool perimeter while the circulation system runs.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate pH Up correctly?\u003c\/h3\u003e\n\n\u003cp\u003eTest your pool water first and only add pH Up when levels are at or below 7.2. Pre-dissolve the required amount in a plastic bucket, then slowly pour the solution along the pool perimeter with the pump running to promote even distribution. Wait at least one hour after application, then retest and repeat dosing if necessary until pH reaches 7.4–7.6.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAlways test pH and total alkalinity before adding product.\u003c\/li\u003e\n  \u003cli\u003ePre-dissolve in plastic—never add dry granules directly to the pool.\u003c\/li\u003e\n  \u003cli\u003ePour slowly around the pool while the circulation system is operating.\u003c\/li\u003e\n  \u003cli\u003eRetest after one hour; reapply in small increments if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat results can I expect and how quickly will pH change?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate pH Up is formulated to raise pH rapidly because it contains sodium carbonate. The exact rise depends on pool volume, current pH, and alkalinity; most pools show measurable change after one hour of circulation. If the first dose doesn’t reach target pH, additional small doses allow controlled, gradual adjustment without overshooting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNoticeable pH increase within one circulation cycle (about 1 hour).\u003c\/li\u003e\n  \u003cli\u003eControlled dosing reduces risk of overshooting target pH.\u003c\/li\u003e\n  \u003cli\u003eFollow the included dosing chart for pool-size guidance.\u003c\/li\u003e\n  \u003cli\u003eBest results when total alkalinity is within the recommended range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs Pool Mate pH Up safe for pool surfaces and equipment?\u003c\/h3\u003e\n\n\u003cp\u003eWhen used as directed, sodium carbonate raises pH without causing surface etching that can occur with uncontrolled acidity. Proper application helps protect plaster, tile grout, metal fittings, and heater elements from corrosion associated with low pH. Always pre-dissolve granules and avoid adding concentrated dry product directly to the pool to prevent local high-concentration contact with surfaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHelps prevent erosion and etching by correcting low pH.\u003c\/li\u003e\n  \u003cli\u003eUse pre-dissolved solution to avoid concentrated contact points.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common pool materials when used per instructions.\u003c\/li\u003e\n  \u003cli\u003eMaintaining pH 7.4–7.6 supports sanitizer effectiveness and comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle this product safely?\u003c\/h3\u003e\n\n\u003cp\u003eKeep the container tightly closed in a cool, dry area away from children, pets, and acids. Use protective gloves and eye protection when mixing or handling to avoid irritation from dust or concentrated solution. Dispose of any unused dissolved solution according to local regulations; never mix with other chemicals except as instructed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStore in original container, sealed, away from moisture and acids.\u003c\/li\u003e\n  \u003cli\u003eWear gloves and eye protection while handling or mixing.\u003c\/li\u003e\n  \u003cli\u003eUse only plastic buckets for pre-dissolving.\u003c\/li\u003e\n  \u003cli\u003eKeep out of reach of children and pets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 10-Pounds Premium pH Up is aimed at pool owners, maintenance pros, and vacation rental hosts who need a reliable, concentrated option to correct low pH. It suits above-ground and in-ground pools, vinyl, concrete, and plaster finishes when used according to directions. If you regularly test your water and follow dosing guidance, this product provides a predictable way to reach and maintain the recommended pH range for comfort, sanitizer performance, and surface preservation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate pH Up do I add for a standard pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow the included dosing chart; amounts vary by pool volume and current pH. Pre-dissolve and add gradually, retesting after one hour.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add the powder directly to my pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Always pre-dissolve in a plastic pail and pour slowly around the pool while the circulation system runs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200369184952,"sku":"B00J7L45CW","price":86.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-10lb.jpg?v=1790612031"},{"product_id":"pool-mate-ph-up-for-swimming-pools-10-lb-sodium-carbonate-formula-for-fast-ph-increase","title":"Pool Mate pH Up for Swimming Pools 10 lb — Sodium Carbonate Formula for Fast pH Increase","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 10-Pounds Premium pH Up is a sodium carbonate pH increaser designed to quickly raise and stabilize pool pH for safer, clearer water.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping your pool pH in the ideal range prevents equipment corrosion, skin and eye irritation, and helps chemical sanitizers work efficiently. Pool Mate pH Up comes in a 10-pound supply and is formulated to lift low pH values toward the recommended 7.4–7.6 range. Use it along with routine testing and circulation to maintain balanced water.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate pH Up safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eTest your pool water first using a reliable test kit. If pH is 7.2 or lower, pre-dissolve the recommended amount in a plastic pail of water and pour the solution slowly around the pool perimeter while the pump is running. Allow the filtration system to run at least one hour before retesting and repeat as needed until pH reaches the target range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways measure pH before adding chemicals.\u003c\/li\u003e\n  \u003cli\u003ePre-dissolve in a plastic pail to prevent localized concentration.\u003c\/li\u003e\n  \u003cli\u003ePour slowly around the pool while circulation is operating.\u003c\/li\u003e\n  \u003cli\u003eRun the pump for at least one hour, then retest.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does Pool Mate pH Up contain and how fast does it work?\u003c\/h3\u003e\n\u003cp\u003eThis product is based on sodium carbonate (soda ash), a fast-acting alkaline compound commonly used in pools. It raises pH quickly when applied correctly, restoring water balance without prolonged waiting periods. Results depend on pool volume and current chemistry, so follow dosing guidance for predictable adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSodium carbonate formulation for rapid pH increase.\u003c\/li\u003e\n  \u003cli\u003eNoticeable pH rise after one circulation cycle in most cases.\u003c\/li\u003e\n  \u003cli\u003eDosing varies by pool size and measured pH drop.\u003c\/li\u003e\n  \u003cli\u003eRepeat applications may be needed for large corrections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using pH Up affect other pool chemistry like alkalinity or chlorine?\u003c\/h3\u003e\n\u003cp\u003eRaising pH with sodium carbonate can also raise total alkalinity, so monitor both values after treatment. Chlorine efficacy can be influenced by pH, so bringing pH into the recommended band helps sanitizers perform as intended. Balance pH and alkalinity together for long-term water stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpect alkalinity to rise alongside pH; test both.\u003c\/li\u003e\n  \u003cli\u003eBalanced pH optimizes chlorine performance.\u003c\/li\u003e\n  \u003cli\u003eAdjust incrementally to avoid overshooting targets.\u003c\/li\u003e\n  \u003cli\u003eCombine with regular testing for consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product designed for? Pool Mate 10-Pounds Premium pH Up is aimed at homeowners, pool service professionals, and rental property managers who maintain small to medium residential pools and need a reliable, concentrated pH increaser. It suits anyone who performs routine water testing and wants a fast method to correct low pH and protect pool surfaces, equipment, and bather comfort. Follow label instructions, wear appropriate protective gear when handling chemicals, and store the container in a cool, dry place away from children and pets.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate pH Up do I add to my pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dosage depends on pool volume and current pH; follow the included chart and pre-dissolve before adding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add pH Up directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—pre-dissolve in a plastic pail and pour around the perimeter while the pump runs for safe, even distribution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200390385848,"sku":"B0CWVSCB8Q","price":88.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_8b8598af-4689-4dc4-bd99-19bc03463e48.jpg?v=1790612318"},{"product_id":"pool-mate-7-pound-pool-stabilizer-cyanuric-acid-fast-dissolve-conditioner-to-protect-chlorine-and-reduce-uv-loss","title":"Pool Mate 7-Pound Pool Stabilizer (Cyanuric Acid) - Fast-Dissolve Conditioner to Protect Chlorine and Reduce UV Loss","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 7-Pounds Premium Pool Stabilizer and Conditioner is a cyanuric acid pool treatment that helps protect and extend the life of your chlorine by keeping stabilizer levels in the recommended 40–100 ppm range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping swim water balanced helps chlorine work efficiently and saves you time and money. Pool Mate’s 7-pound bag dissolves quickly and is designed to raise and maintain cyanuric acid (stabilizer) so sunlight breaks down less chlorine. Use with a reliable test kit, follow the included dosing chart, and circulate your filter to ensure even distribution.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I bring a new or refilled pool to the right stabilizer level?\u003c\/h3\u003e\n\u003cp\u003eFor pools that are new, recently refilled, or currently have no stabilizer, add 4 ounces of Pool Mate per 1,000 gallons to move toward the target 40–100 ppm range. Measure the pool volume first, add product slowly into the skimmer or premix in warm water, and run circulation to fully dissolve.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd 4 oz per 1,000 gallons for initial dosing\u003c\/li\u003e\n  \u003cli\u003ePremix in a pail of warm water if you prefer direct addition\u003c\/li\u003e\n  \u003cli\u003eRecirculate for 24 hours to ensure complete dissolution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dose raises cyanuric acid and how do I fine-tune levels?\u003c\/h3\u003e\n\u003cp\u003ePool Mate’s concentration and chart make it simple to adjust levels. As a rule of thumb, 6 ounces of this product raises cyanuric acid by about 10 ppm in 5,000 gallons; use that ratio to calculate incremental additions until you reach your target.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 oz increases cyanuric acid ~10 ppm per 5,000 gallons\u003c\/li\u003e\n  \u003cli\u003eUse small, measured additions to avoid overshooting\u003c\/li\u003e\n  \u003cli\u003eRe-test after 24 hours of circulation before adding more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I add Pool Mate to my pool correctly and safely?\u003c\/h3\u003e\n\u003cp\u003eAlways ensure the filter is clean before treatment and circulate water continuously after adding the product. You can pour slowly into the skimmer or pre-dissolve in a warm-water bucket, then introduce the solution to the skimmer; keep the pump running for at least 24 hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean the filter prior to dosing for best distribution\u003c\/li\u003e\n  \u003cli\u003eAdd slowly into skimmer or premix in warm water to dissolve faster\u003c\/li\u003e\n  \u003cli\u003eRun the pump for 24 hours to fully dissolve product\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does stabilizer affect chlorine maintenance and pool chemistry?\u003c\/h3\u003e\n\u003cp\u003eCyanuric acid acts as a sunscreen for free chlorine, slowing its breakdown under sunlight so you use less chlorine overall. Maintain free chlorine residuals and pH within recommended ranges to keep sanitizer performance steady while enjoying reduced chlorine consumption.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps reduce chlorine loss due to sunlight and UV exposure\u003c\/li\u003e\n  \u003cli\u003eCan reduce chlorine consumption by up to 25% when levels are correct\u003c\/li\u003e\n  \u003cli\u003eKeep free chlorine at 2.0–4.0 ppm and pH at 7.4–7.6 for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Pool Mate 7-Pounds Premium Pool Stabilizer and Conditioner is ideal for homeowners, pool service pros, and anyone managing outdoor pools exposed to sunlight who wants to protect chlorine effectiveness, lower ongoing chemical use, and simplify maintenance. Choose this product if you want a reliable, easy-to-dose cyanuric acid treatment to stabilize your pool water and support consistent sanitizer performance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCyanuric acid for pools\u003c\/li\u003e\n  \u003cli\u003eHelps reduce chlorine loss\u003c\/li\u003e\n  \u003cli\u003eRecommended cyanuric acid level is 40-100 ppm\u003c\/li\u003e\n  \u003cli\u003e6 ounces raises cyanuric acid level 10 ppm per 5,000 gallons of water\u003c\/li\u003e\n  \u003cli\u003eIncreases cyanuric acid level\u003c\/li\u003e\n  \u003cli\u003eDecreases chlorine loss due to sunlight\u003c\/li\u003e\n  \u003cli\u003eReduce chlorine consumption up to 25%\u003c\/li\u003e\n  \u003cli\u003eImproves the effectiveness of chlorine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate do I add for 10,000 gallons?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use 8 ounces for an initial dose per 10,000 gallons (4 oz per 1,000 gallons). Re-test after 24 hours and adjust as needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add Pool Mate directly to the pool surface?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s best to add slowly into the skimmer or premix in warm water, then run the pump for 24 hours for full dissolution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54200404672696,"sku":"B00IZOE4HI","price":82.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_02b41bb7-7d2a-4aa1-9693-39111e90068b.jpg?v=1790612637"},{"product_id":"pool-mate-inflatable-pool-pillows-for-above-ground-pools-4-x-8-ft-2-pack-22-mm-vinyl-winter-ice-protection","title":"Pool Mate Inflatable Pool Pillows for Above Ground Pools, 4 x 8 ft 2-Pack (.22 mm Vinyl) — Winter Ice Protection","description":"\u003cstrong\u003eInflatable Pool Mate winterizing pillows protect above-ground pool walls by absorbing ice pressure under the cover.\u003c\/strong\u003e\n\n\u003cp\u003eWhen freezing weather arrives, ice expansion and snow load can push against your pool walls and cover. The Pool Mate 4 ft. x 8 ft. 2-Pack Classic Pool Pillows provide a simple, durable barrier that takes on that pressure so the pool structure and cover stay safer through winter. Made from heavier .22 mm vinyl, these pillows are built to last and are sized to suit most oval and rectangular above-ground pools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do Pool Mate pillows prevent winter damage to above-ground pools?\u003c\/h3\u003e\n\u003cp\u003ePool Mate pillows sit between the pool water and cover, creating a controlled weak point that absorbs the movement and force of expanding ice. If ice shifts, the pillow gives way before the pool wall does, reducing the chance of costly damage. The pillows also lift the cover slightly to discourage water from pooling and seeping through seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to take on ice pressure instead of pool walls\u003c\/li\u003e\n  \u003cli\u003ePillow will vent rather than transfer force to the pool\u003c\/li\u003e\n  \u003cli\u003eHelps prevent water from collecting directly over the pool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and material are these Pool Mate pillows, and how many should I use?\u003c\/h3\u003e\n\u003cp\u003eThis listing is a 2-pack of 4 ft x 8 ft inflatable pillows constructed from .22 mm vinyl that’s about 37% heavier than the industry standard. Choose pillow quantity by pool shape: smaller pillows suit round pools, larger or multiple pillows suit oval or long pools. Using more than one pillow spreads load and adds redundancy if one pillow fails.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEach pillow measures 4 ft by 8 ft — sold as a two-pack\u003c\/li\u003e\n  \u003cli\u003eDurable .22 mm vinyl for improved longevity\u003c\/li\u003e\n  \u003cli\u003eAdd extra pillows for longer or oval pools for better coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and inflate the Pool Mate pillow correctly?\u003c\/h3\u003e\n\u003cp\u003eInflate the pillow until it is about half to two-thirds full; do not overinflate, as excessive pressure can force the valve out during freeze-thaw cycles. Place the pillow under the winter cover centered on the pool; position multiple pillows evenly for oval or larger pools. If the valve is stiff, a brief warm air flow (e.g., hair dryer) loosens it for closing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFill pillow 1\/2 to 3\/4 full to allow compression\u003c\/li\u003e\n  \u003cli\u003eCenter under the cover and space multiple pillows evenly\u003c\/li\u003e\n  \u003cli\u003eWarm valve briefly if it’s difficult to seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Pool Mate pillows reduce debris build-up and make spring opening easier?\u003c\/h3\u003e\n\u003cp\u003eYes — by lifting the cover slightly and directing debris toward the sides, the pillows reduce central pooling of rain, leaves and snow. That makes removing debris and opening the pool in spring faster and cleaner. Multiple pillows can improve debris displacement across larger covers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElevates cover to reduce standing water over the pool\u003c\/li\u003e\n  \u003cli\u003ePushes leaves and debris toward the pool perimeter for easy removal\u003c\/li\u003e\n  \u003cli\u003eHelps protect the cover from wear where debris collects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool Mate 4 ft x 8 ft 2-Pack Classic Pool Pillows are meant for above-ground pool owners preparing for winter—especially those with oval or larger pools who want heavy-duty vinyl construction, a cost-effective two-pack, and a straightforward installation. They suit seasonal DIY closers who prefer durable materials and redundancy to protect pool walls and simplify spring opening.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: 2-pack, 4 ft x 8 ft size, .22 mm vinyl 37% heavier than standard, absorbs ice pressure, reduces debris buildup, recommended fill 1\/2–3\/4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How full should I inflate the Pool Mate pillow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inflate pillows about half to two-thirds full; overinflation can cause valve failure during freezing cycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use more than two pillows for larger pools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, add pillows for oval or larger pools to distribute ice pressure and provide redundancy if one fails.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54202464927928,"sku":"B010K6L9T4","price":105.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-view.jpg?v=1790618205"},{"product_id":"pool-mate-concentrated-pool-filter-cleaner-2-pack-2-x-1-qt-restores-sand-cartridge-d-e-filters","title":"Pool Mate Concentrated Pool Filter Cleaner 2-Pack (2 x 1 qt) — Restores Sand, Cartridge \u0026 D.E. Filters","description":"\u003cp\u003e\u003cstrong\u003ePool Mate Concentrated Filter Cleaner is a powerful liquid formula for restoring clogged sand, cartridge, and D.E. pool and spa filters to peak performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for routine maintenance, this concentrated cleaner removes suntan lotions, body oils, grease, mineral scale and deposits that reduce filtration efficiency. The two 1‑quart bottles provide enough product for multiple cleaning cycles and are formulated for use with all common filter types. Directions are clear for sand, cartridge and diatomaceous earth systems to help you safely dissolve buildup and extend filter life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate with sand filters?\u003c\/h3\u003e\n\u003cp\u003eFor sand filters you add the cleaner while the unit is backwashing so the solution circulates through the media and dislodges oils and scale. Larger systems may require two quarts; smaller systems typically use one. Always follow safety steps like shutting off inlets\/outlets and closing the main drain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off inlets\/outlets and close main drain before adding cleaner.\u003c\/li\u003e\n  \u003cli\u003eAdd one quart through the skimmer while backwashing; use two quarts for filters with over 300 lbs of sand.\u003c\/li\u003e\n  \u003cli\u003eRun until cleaner appears in backwash, soak 30–60 minutes, then backwash until clear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s the correct procedure for cartridge filters?\u003c\/h3\u003e\n\u003cp\u003eCartridge filters are removed and soaked to let the concentrated formula break down oils and mineral films. Rinse thoroughly after soaking to wash away residue and reassemble when the cartridge is foam‑free and clean. This restores flow and prolongs cartridge life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShut off the pump and relieve pressure via safety valve before opening the unit.\u003c\/li\u003e\n  \u003cli\u003eRinse loose debris, then soak the cartridge in 1 quart cleaner mixed with 5 gallons water for 30–60 minutes.\u003c\/li\u003e\n  \u003cli\u003eRinse at high pressure until no foam remains, then reinstall and resume normal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you clean diatomaceous earth (D.E.) filter elements with this cleaner?\u003c\/h3\u003e\n\u003cp\u003eUse the same soak-and-rinse approach for D.E. grids: remove, rinse, immerse in diluted cleaner and rinse thoroughly before replacing media. This helps remove fine particulates, oils and mineral buildup that trap in the grid folds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off the filter and relieve pressure before disassembling to remove grids.\u003c\/li\u003e\n  \u003cli\u003eSoak grids in 1 quart cleaner plus 5 gallons water for 30–60 minutes.\u003c\/li\u003e\n  \u003cli\u003eRinse grids thoroughly, install new filter media, and return the unit to normal service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Pool Mate harm my pool equipment or finish?\u003c\/h3\u003e\n\u003cp\u003eWhen used as directed, the concentrated formula is intended for internal filter cleaning and not for direct application to pool surfaces. Proper dilution and thorough rinsing are part of each procedure to prevent residue. Follow manufacturer guidelines for your equipment and avoid mixing with other chemicals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse only in filters and follow soak times and rinse steps in directions.\u003c\/li\u003e\n  \u003cli\u003eDo not mix with other cleaners or pool chemicals; rinse components until foam clears.\u003c\/li\u003e\n  \u003cli\u003eConsult your filter manufacturer if in doubt about materials compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool Mate 1‑Quart Concentrated Filter Cleaner is made for homeowners, pool service pros and facility managers who want a reliable maintenance product to cut oils, sunscreen, grease and scale from sand, cartridge and D.E. filters. It suits anyone maintaining residential pools, spas or smaller commercial systems who wants clearer water, improved flow and longer filter life without complicated procedures. Made in the USA and sold in convenient 1‑quart bottles, this two‑pack gives flexibility for repeat cleanings and larger systems.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I use Pool Mate Filter Cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use it as part of regular maintenance or when flow decreases; many owners clean cartridges or grids every 3–6 months, sand filters as needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix Pool Mate with other pool chemicals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not mix with other chemicals; follow directions and rinse thoroughly after cleaning to avoid interactions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54203845640376,"sku":"B00IXYJOOI","price":100.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label_4cb0cfb4-6af3-4f62-afa5-3c37a7aa4ce5.jpg?v=1790620517"},{"product_id":"pool-mate-classic-pool-pillow-for-above-ground-pools-4-ft-x-15-ft-22-mm-vinyl-ice-equalizer","title":"Pool Mate Classic Pool Pillow for Above-Ground Pools — 4 ft x 15 ft, .22 mm Vinyl Ice Equalizer","description":"\u003cp\u003e\u003cstrong\u003eThe Pool Mate 4 ft. x 15 ft. Classic Pool Pillow cushions your above-ground pool from ice pressure and reduces debris build-up beneath winter covers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen winter arrives, expanding ice and season debris can strain pool walls and covers. The Pool Mate Classic ice equalizer is a simple inflatable barrier placed under your winter cover to absorb freeze pressure, lift the cover away from the water, and help channel leaves and rain toward the pool edges. Designed for above-ground pools, this model balances durability with easy setup so you can winterize with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pillow protect my pool during freezing conditions?\u003c\/h3\u003e\n\u003cp\u003eThe pillow acts as a sacrificial cushion so ice expansion presses against the inflatable rather than your pool’s walls. It compresses or pops before structural components fail, reducing the risk of costly damage. Proper inflation prevents premature valve failure while allowing the pillow to give under extreme pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAbsorbs and redistributes ice expansion force away from pool walls\u003c\/li\u003e\n  \u003cli\u003eDesigned to pop under extreme stress to prevent wall damage\u003c\/li\u003e\n  \u003cli\u003eFill halfway to two-thirds to allow compressibility during freeze\u003c\/li\u003e\n  \u003cli\u003eOptional multiple pillows for added redundancy on larger pools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material quality and sizing details?\u003c\/h3\u003e\n\u003cp\u003eThis Classic pillow is built from .22 mm vinyl, about 37% heavier than the typical industry standard, improving puncture resistance and longevity. The 4 ft x 15 ft dimension fits many above-ground pool layouts—choose smaller pillows for round pools, larger ones for ovals, or use multiples to span the cover properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e.22 mm thick vinyl for increased toughness and dependability\u003c\/li\u003e\n  \u003cli\u003e4 ft x 15 ft footprint suitable for many above-ground installations\u003c\/li\u003e\n  \u003cli\u003eRecommended 1\/2 to 3\/4 inflation to maintain effectiveness\u003c\/li\u003e\n  \u003cli\u003eCombining pillows can protect bigger or irregularly shaped pools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the Pool Mate pillow correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: inflate, place under the winter cover at the pool center, and check valve closure. Avoid overinflating; excess air prevents the pillow from yielding under ice and can cause the valve to pop. If the valve sticks during closing, warming it slightly with a hair dryer loosens the material for a secure seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInflate to roughly 50–75% capacity; leave room for compression\u003c\/li\u003e\n  \u003cli\u003ePlace centrally under the winter cover, adjusting for pool shape\u003c\/li\u003e\n  \u003cli\u003eUse a hair dryer to ease stubborn valves before final closure\u003c\/li\u003e\n  \u003cli\u003eConsider extra pillows for redundancy and to control cover sag\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this pillow help keep my pool cover cleaner over winter?\u003c\/h3\u003e\n\u003cp\u003eYes—by lifting the cover and creating a center ridge, the pillow helps divert rainwater, leaves, and snow toward the perimeter, simplifying spring cleanup. The reduced water pooling also lessens water seepage through the cover, protecting the pool interior and cover fabric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces standing water accumulation on the cover\u003c\/li\u003e\n  \u003cli\u003eChannels debris to the sides for easier removal in spring\u003c\/li\u003e\n  \u003cli\u003eHelps maintain cover tension and reduces seep-through stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pool Mate 4 ft. x 15 ft. Classic Pool Pillow is intended for owners of above-ground pools who want a reliable, affordable way to protect pool walls and covers through winter. It's a good choice for homeowners seeking durable vinyl construction, straightforward installation, and the option to add extra pillows for larger or irregularly shaped pools. If you prioritize seasonal protection with minimal setup and proven materials, this Pool Mate pillow is designed to fit those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much should I inflate the Pool Mate pillow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inflate to about half to three-quarters full so it can compress under ice; avoid overfilling which risks valve failure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use more than one pillow for my pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Multiple pillows add redundancy for larger or oddly shaped pools but may require a larger cover to accommodate them.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54204074524856,"sku":"B010K6LK1Q","price":99.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-view-pillow.jpg?v=1790622893"},{"product_id":"pool-mate-calcium-hardness-increaser-for-pools-16-lb-granular-calcium-chloride-stabilizes-hardness-protects-surfaces","title":"Pool Mate Calcium Hardness Increaser for Pools — 16 lb Granular Calcium Chloride, Stabilizes Hardness \u0026 Protects Surfaces","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 16-Pounds Calcium Hardness Increaser is a granular calcium chloride formula designed to raise and stabilize total hardness in swimming pools so surfaces and equipment are protected.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLow calcium hardness can lead to etched plaster, corroded metal parts and cloudy water; Pool Mate's dry granular product restores calcium levels to manufacturers' recommended ranges for vinyl, tile, fiberglass and painted pools. Use a reliable hardness test kit first, then dissolve the measured amount in a plastic bucket of pool water and distribute the solution around the pool while the pump is running. Follow dosing limits: up to 2 lb per 5-gallon bucket, and no more than 10 lb per 10,000 gallons within a two-hour window.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know when to use this calcium hardness increaser?\u003c\/h3\u003e\n\u003cp\u003eTest total calcium hardness with a trusted pool test kit. If results fall below the recommended band for your pool surface, add Pool Mate to bring levels into range. Regular monitoring prevents gradual depletion and sudden surface problems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVinyl pools target: 200–300 ppm\u003c\/li\u003e\n  \u003cli\u003eTile \u0026amp; exposed aggregate: 200–400 ppm\u003c\/li\u003e\n  \u003cli\u003eMarcite, fiberglass, painted: 250–400 ppm\u003c\/li\u003e\n  \u003cli\u003eTest before dosing and weekly during heavy use or after large water additions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I dissolve and add the product safely?\u003c\/h3\u003e\n\u003cp\u003eAlways pre-dissolve Pool Mate in a plastic bucket filled with pool water, stirring until the granules are fully dissolved. Pour the solution slowly around the pool perimeter with the circulation system active to distribute evenly and avoid localized high concentrations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 2 lb of product per ~5-gallon bucket of water\u003c\/li\u003e\n  \u003cli\u003eSlowly pour around pool while pump runs to disperse\u003c\/li\u003e\n  \u003cli\u003eDo not add directly into skimmer or into the deep end without diluting\u003c\/li\u003e\n  \u003cli\u003eWait at least two hours before adding additional product if treating large volumes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dosing rules keep my pool safe and balanced?\u003c\/h3\u003e\n\u003cp\u003eFollow the included dosing chart for your pool volume and target ppm change. A small-step approach avoids overshooting calcium hardness and reduces the chance of cloudiness or scaling from too-rapid changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 ounces raises hardness approximately 10 ppm per 5,000 gallons\u003c\/li\u003e\n  \u003cli\u003eIn a 10,000-gallon pool, add no more than 10 lb per two-hour period\u003c\/li\u003e\n  \u003cli\u003eIf large adjustments are needed, stagger additions over several hours or days\u003c\/li\u003e\n  \u003cli\u003eRetest hardness after each addition and before swimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product affect other pool chemistry readings?\u003c\/h3\u003e\n\u003cp\u003ePool Mate focuses on calcium hardness; it has minimal direct effect on pH and chlorine, but proper balance is interconnected. After raising hardness, confirm pH and sanitizer levels and make any adjustments to maintain overall water quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck pH and alkalinity after hardness adjustments\u003c\/li\u003e\n  \u003cli\u003eChlorine effectiveness is best when overall balance is maintained\u003c\/li\u003e\n  \u003cli\u003eAddress imbalances in steps to avoid cloudiness or scale\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Pool Mate 16 lb Calcium Hardness Increaser is ideal for pool owners, service technicians and property managers who need a reliable, easy-to-use way to raise total calcium hardness and protect pool liners, plaster, tile and equipment. If you test low on hardness, want to prevent etching or scaling, or are preparing a recently filled pool for season use, this concentrated granular formula offers practical dosing guidance and predictable results when used according to instructions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate raises hardness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Eight ounces of product raises calcium hardness about 10 ppm per 5,000 gallons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add Pool Mate directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — dissolve in a plastic bucket of pool water first, then pour slowly around the pool while the pump runs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54204179415224,"sku":"B00U2NOVSC","price":113.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-package-16lb.jpg?v=1790625496"},{"product_id":"pool-mate-winter-oval-pool-cover-12-x-18-ft-classic-dura-guard-solid-polyethylene-winch-cable-10-year-warranty","title":"Pool Mate Winter Oval Pool Cover 12 x 18 ft Classic Dura‑Guard — solid polyethylene, winch \u0026 cable, 10‑year warranty","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 12 x 18 ft Classic Dura-Guard Winter Oval Above Ground Pool Cover is a heavy-duty, solid polyethylene winter cover designed to protect oval above-ground pools through the off-season while including a winch and cable and a 10-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis solid winter cover fits 12 x 18 ft oval above-ground pools and offers a durable barrier against snow, ice and debris during the off-season. Built from woven polyethylene with heat-sealed seams and a UV-coated blue topside, the cover is constructed heavier than typical industry offerings and includes a 4-foot overlap to simplify installation. It comes with a winch and cable for perimeter securing and is intended for traditional above-ground pools with a standard top rail.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep my pool safe in winter?\u003c\/h3\u003e\n\u003cp\u003eThe Pool Mate winter cover blocks precipitation and debris with a solid, non‑permeable construction that prevents water from passing through the material. Heat-sealed seams, a UV-coated topside and an 8 x 8 scrim weave add strength so the cover resists wear from sun and seasonal stresses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid polyethylene that prevents water penetration\u003c\/li\u003e\n  \u003cli\u003e8 x 8 scrim woven for improved tear resistance\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams to reduce seam failure\u003c\/li\u003e\n  \u003cli\u003eUV-coated blue topside to slow sun damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my pool and how is it installed?\u003c\/h3\u003e\n\u003cp\u003eThis model is sized for a 12 x 18 ft oval pool but includes a 4-foot overlap (cover size: 16 x 22 ft) so it’s easier to position over the pool and float loosely on the water. Installation uses the included winch and cable threaded through the cover’s grommets; for decks or raised rails, water weights and routing the cable under the deck can improve security.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCover overall size including overlap: 16 x 22 ft\u003c\/li\u003e\n  \u003cli\u003eIncludes winch and cable for securing through grommets\u003c\/li\u003e\n  \u003cli\u003eUse vinyl water weights on decks; route cable under decks when possible\u003c\/li\u003e\n  \u003cli\u003eConsider sizing up if your top rail is unusually large\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the material and what warranty is included?\u003c\/h3\u003e\n\u003cp\u003eThe Classic Dura-Guard cover is woven at 2.36 oz\/yd² (80 g\/m²) with an 8 x 8 scrim and is manufactured about 18% heavier than standard covers, giving greater expected longevity and tear resistance. Pool Mate backs this product with a 10-year warranty that covers manufacturing defects, reflecting the brand’s long experience in pool covers since 1999.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial weight: 2.36 oz\/yd² (80 g\/m²)\u003c\/li\u003e\n  \u003cli\u003e8 x 8 scrim weave for structural strength\u003c\/li\u003e\n  \u003cli\u003eConstructed 18% heavier than industry standard\u003c\/li\u003e\n  \u003cli\u003e10-year manufacturer warranty against defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories or additional steps improve winter performance?\u003c\/h3\u003e\n\u003cp\u003eUse the included winch and cable as the primary securing method and add cover clips or cover wrap for extra hold (sold separately). For partial or full decks, place vinyl water weights on top of the cover and route cable under the deck to prevent wind uplift; an ice equalizer pillow is available separately to protect the liner from ice movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded winch and cable for perimeter securing\u003c\/li\u003e\n  \u003cli\u003eCover clips and cover wrap available separately for extra security\u003c\/li\u003e\n  \u003cli\u003eUse vinyl water weights on decks to prevent blow-off\u003c\/li\u003e\n  \u003cli\u003eIce equalizer pillow sold separately to reduce ice stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Pool Mate Classic Dura-Guard winter cover is designed for owners of traditional above-ground oval pools who want a robust, solid winter barrier that’s easy to install and built to outlast seasonal wear. It’s a good choice if you prefer a solid, non-permeable cover with a longer overlap for simpler placement, need a cover that handles high-wind areas, and value a product backed by a decade-long warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this winter cover waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s a solid, non‑permeable polyethylene cover that prevents water from passing through the material.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cover include everything needed to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes a winch and cable for securing through grommets; clips, cover wrap, and water weights are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54204234989752,"sku":"B01H8ESYQ2","price":96.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-view-oval-12x18.jpg?v=1790626577"},{"product_id":"pool-mate-pool-metal-remover-1-quart-2-pack-concentrated-chelating-formula-for-stain-scale-control","title":"Pool Mate Pool Metal Remover — 1-Quart 2-Pack, Concentrated Chelating Formula for Stain \u0026 Scale Control","description":"\u003cstrong\u003ePool Mate Premium Metal Remover is a concentrated chelating solution that prevents and removes metal stains and mineral discoloration from pool water.\u003c\/strong\u003e\n\n\u003cp\u003eMany pools pick up trace metals from source water, well water, or plumbing that react with oxidizers and turn water cloudy or leave stains. This concentrated, ready-to-use formula sequesters iron, manganese and other heavy metals so they won’t form stains when you add chlorine or perform a shock treatment. Made in the USA and supplied in a convenient 1-quart two-pack, it’s formulated for routine maintenance, problem water treatment, and scale control without interfering with common pool sanitizers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Pool Mate tackle discolored water caused by metals?\u003c\/h3\u003e\n\u003cp\u003ePool Mate works by chelating metal ions—binding them so they stay dissolved and can be filtered out rather than oxidizing into visible stains. For pools with low metal levels it neutralizes trace iron and manganese before other chemicals are added; for higher concentrations you can dose proportionally to the measured metal content. Follow recirculation and pH adjustment steps after treatment to maximize clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard dose: 1.5 oz per 1,000 gallons for prevention or up to 1 ppm metals\u003c\/li\u003e\n  \u003cli\u003eIncrease dose proportionally for higher metal concentrations\u003c\/li\u003e\n  \u003cli\u003eAdd before chlorine or shock and recirculate for even distribution\u003c\/li\u003e\n  \u003cli\u003eAdjust pH to 7.2–7.6 after treatment for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this product prevent scale and mineral buildup?\u003c\/h3\u003e\n\u003cp\u003eYes — the formula also helps control scale caused by calcium and other hardness minerals by keeping them in solution and reducing precipitation. Use a targeted higher dose for active scale issues, then switch to a routine lower dose to reduce recurrence. Regular applications make other chemical additions less likely to cause cloudy water or deposits on surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFor scale removal: 0.75 oz per 1,000 gallons with 6+ hours recirculation\u003c\/li\u003e\n  \u003cli\u003eWeekly prevention: 1–2 oz per 5,000 gallons\u003c\/li\u003e\n  \u003cli\u003eCompatible with chlorine, algaecides, and stabilizers when added separately\u003c\/li\u003e\n  \u003cli\u003eDo not premix with other pool chemicals; add directly to water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use Pool Mate when opening a new pool or troubleshooting stains?\u003c\/h3\u003e\n\u003cp\u003eWhen starting a new pool or opening for the season, apply the product first to neutralize trace metals before adding any sanitizer or other treatments. If your pool already shows discoloration, have metal levels tested to determine the right treatment volume. After dosing, run the pump and filter to circulate the chelator and then proceed with the remainder of your chemical program.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew\/opening: 1.5 oz per 1,000 gallons added before other chemicals\u003c\/li\u003e\n  \u003cli\u003eDiscolored water: test metals; dose 1.5 oz per 1,000 gallons for \u0026lt;1 ppm\u003c\/li\u003e\n  \u003cli\u003eFor \u0026gt;1 ppm metals, increase dose proportionally based on test results\u003c\/li\u003e\n  \u003cli\u003eAlways recirculate after addition for uniform distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for: Pool Mate Premium Metal Remover suits pool owners and service professionals dealing with well or municipal waters that contain trace metals, anyone reopening a pool who wants to prevent early-season staining, and facilities managing recurring scale or mineral precipitation. It’s ideal when you want a concentrated, easy-to-use chelating treatment that won’t interfere with standard sanitizers and can be used as part of weekly maintenance or targeted remediation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Pool Mate safe to use with chlorine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Add Pool Mate separately and circulate before adding chlorine; it won’t interfere with chlorine’s sanitizing action.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I apply Pool Mate for prevention?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For weekly prevention use 1–2 oz per 5,000 gallons each week to help prevent scale and staining.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54204325822648,"sku":"B0F79V3VVQ","price":105.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-bottle.jpg?v=1790628912"},{"product_id":"pool-mate-8-ft-water-bags-5-pack-classic-blue-heavy-20-gauge-vinyl-double-chamber-winter-pool-cover-weights","title":"Pool Mate 8 ft Water Bags 5-Pack Classic Blue — Heavy 20‑Gauge Vinyl, Double‑Chamber Winter Pool Cover Weights","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 8 ft. 5-pack Classic Blue water bags secure your in-ground winter pool cover by weighing down the perimeter with extra-heavy 20‑gauge vinyl, double-chamber tubes that resist rolling and feature easy leak-proof valves.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you winterize an in-ground pool, the final step is stabilizing the cover so wind, rain, and snow won’t pull it into the water. These Pool Mate water bags are designed to thread through most pool cover water bag loops and provide a durable, low-profile ballast that is simple to fill, store, and reuse season after season. Built by a company with over 25 years of pool-closing experience, the 8‑foot Classic Blue bags combine rugged construction with thoughtful features to limit bag rolling and bursting from ice expansion.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these water bags keep my winter cover in place?\u003c\/h3\u003e\n\u003cp\u003eThe bags act as a weighted perimeter for your pool cover, holding the edges down evenly so the cover stays taut. Their double-chamber design keeps the tube stable and prevents it from rolling into the pool, while the long 8‑ft length reduces the number of bags required for full coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 ft length covers more perimeter per bag for efficient placement.\u003c\/li\u003e\n  \u003cli\u003eDouble-chamber construction minimizes rolling and shifting.\u003c\/li\u003e\n  \u003cli\u003eHeavy 20‑gauge (.33 mm) vinyl resists punctures and wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the best way to fill and set these water bags?\u003c\/h3\u003e\n\u003cp\u003eSlide each tube through the water bag loops on your winter cover, attach a garden hose into the leak-proof valve, and fill only about half full. Leaving space for ice expansion prevents splitting; a hair dryer can help loosen a stiff valve when closing for a snug seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread through cover loops before filling to position bags accurately.\u003c\/li\u003e\n  \u003cli\u003eFill approximately 50% to allow safe ice expansion space.\u003c\/li\u003e\n  \u003cli\u003eUse a hair dryer if the valve is tight when closing for an easier seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bags durable enough to last multiple seasons?\u003c\/h3\u003e\n\u003cp\u003eYes — Pool Mate water bags are made from extra heavy-duty materials and built to endure repeated use. The 20‑gauge vinyl is over 100% heavier than typical industry materials, and the dual chambers distribute stress to reduce wear points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra Heavy-Duty 20‑gauge vinyl provides increased tear resistance.\u003c\/li\u003e\n  \u003cli\u003eDual chambers lower the chance of full-tube failure.\u003c\/li\u003e\n  \u003cli\u003eReusable design simplifies storage and redeployment each season.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many bags do I need and where should I place them?\u003c\/h3\u003e\n\u003cp\u003ePlacement depends on pool shape and size, but the 8‑ft length covers more linear feet than shorter tubes, so fewer bags are required. Space them evenly around the perimeter, concentrating extra weight at corners and exposed sections to keep the cover centered and secure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse corners and wind-prone sides for extra weighting.\u003c\/li\u003e\n  \u003cli\u003eEven spacing prevents sagging and isolated stress on the cover.\u003c\/li\u003e\n  \u003cli\u003eAdjust number based on pool geometry — longer tubes reduce total count.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool Mate 8 ft. 5-Pack Classic Blue water bags are ideal for homeowners who close in-ground pools for winter and want a durable, user-friendly ballast solution. They suit anyone who prefers fewer, longer tubes to cover larger perimeters, values heavy-duty construction that lasts multiple seasons, and wants an easy fill-and-store option backed by decades of pool-closing experience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How full should I fill Pool Mate water bags?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fill each bag about halfway to allow for ice expansion and prevent splitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these water bags roll into my pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The double-chamber design prevents rolling, keeping the tubes secure on the cover edge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54204593340600,"sku":"B0DD9F1JHL","price":117.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging-8ft-blue.jpg?v=1790633693"},{"product_id":"pool-mate-pool-stabilizer-cyanuric-acid-16-lb-fast-dissolving-conditioner-for-outdoor-pools-lowers-chlorine-loss","title":"Pool Mate Pool Stabilizer Cyanuric Acid 16 lb — Fast-Dissolving Conditioner for Outdoor Pools, Lowers Chlorine Loss","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 16-Pounds Premium Pool Stabilizer is a high-purity cyanuric acid treatment that reduces chlorine loss from sunlight and helps maintain a stable disinfectant level in outdoor pools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003ePool owners who want clearer water and lower chlorine consumption use this concentrated stabilizer to slow photodegradation of chlorine. The product dissolves quickly when added through the skimmer or after pre-mixing, and one 16-pound container treats typical residential pools to bring cyanuric acid into the recommended 40–100 ppm range. Follow a reliable test kit and the included dosing chart to achieve and maintain the right stabilizer concentration.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does Pool Mate stabilize chlorine levels?\u003c\/h3\u003e\n\u003cp\u003eThe formulation is designed to disperse rapidly so it begins protecting chlorine soon after it dissolves. For complete dissolution, keep the pump and filter running for 24 hours after application; a clean filter helps the material circulate and dissolve evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecirculate water continuously for 24 hours after adding.\u003c\/li\u003e\n  \u003cli\u003eUse the skimmer for slow addition or pre-dissolve in warm water before adding.\u003c\/li\u003e\n  \u003cli\u003eEnsure the filter is clean to speed dispersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dosage do I need to reach the recommended 40–100 ppm range?\u003c\/h3\u003e\n\u003cp\u003eDosage depends on pool volume and current cyanuric acid level. The included chart shows exact amounts; as a general rule, 6 ounces of this product raises cyanuric acid by about 10 ppm in 5,000 gallons of water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew or freshly filled pools: add 4 oz per 1,000 gallons as a starting point.\u003c\/li\u003e\n  \u003cli\u003eTo raise CYA by 10 ppm: add 6 oz per 5,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eAlways test before and after treating to confirm target ppm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I add Pool Mate to my pool safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eYou can add the stabilizer directly into the skimmer slowly or first dissolve it in a pail of warm water and then pour into the skimmer. Maintain normal sanitizer and pH ranges—chlorine at 2.0–4.0 ppm and pH at 7.4–7.6—so the stabilizer works alongside effective disinfection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd slowly to the skimmer or pre-mix in warm water.\u003c\/li\u003e\n  \u003cli\u003eKeep pump running 24 hours to ensure full dissolution.\u003c\/li\u003e\n  \u003cli\u003eMonitor chlorine and pH; adjust as needed after treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using a stabilizer affect my chlorine usage?\u003c\/h3\u003e\n\u003cp\u003eYes—by shielding free chlorine from ultraviolet breakdown, a proper cyanuric acid level can reduce chlorine loss to sunlight and often lowers overall chlorine demand. Expect improved chlorine longevity when CYA is kept within the recommended 40–100 ppm window.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCan reduce chlorine consumption by up to about 25% under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain more consistent sanitizer residuals throughout sunny days.\u003c\/li\u003e\n  \u003cli\u003eNot a sanitizer—always maintain required chlorine levels for sanitation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 16-Pounds Premium Pool Stabilizer is ideal for owners of outdoor residential pools who want to protect chlorine from ultraviolet degradation, reduce chemical usage, and keep sanitizer levels steady. It’s suited to new or refilled pools needing a starting CYA level, as well as established pools that test low on cyanuric acid. Use with a reliable test kit and follow the dosing chart for safe, effective results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate raises cyanuric acid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Approximately 6 ounces raises CYA by 10 ppm in 5,000 gallons; use the included chart for exact dosing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add Pool Mate directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — add slowly into the skimmer or pre-dissolve in warm water, then run the pump 24 hours for full dissolution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54204684828856,"sku":"B01CP5S17G","price":167.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-16lb.jpg?v=1790636550"},{"product_id":"pool-mate-granular-flocculant-pool-clarifier-5-pound-pack-fast-settling-for-cloudy-pools","title":"Pool Mate Granular Flocculant Pool Clarifier, 5-Pound Pack — Fast-Settling for Cloudy Pools","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 5-Pounds Premium Granular Flocculant is a concentrated clarifier that gathers suspended particles so they settle to the pool floor for easy vacuuming, restoring clear water.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCloudy or discolored pool water is usually caused by tiny suspended particles that a filter alone can’t capture. Pool Mate’s granular flocculant binds those fine solids into larger particles that sink, allowing you to remove them by vacuuming. Designed for residential pools, this granular formula works with both organic and inorganic debris when used correctly alongside routine filtration and pH maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate flocculant safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eFollow a simple sequence to get the best results: clean or backwash your filter, confirm the pH, shut off the filter, broadcast the granules, let the particles settle, then vacuum. Proper pH and filtration maintenance are essential for the flocculant to work as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBackwash or clean the filter before application to ensure efficiency.\u003c\/li\u003e\n  \u003cli\u003eAdjust pool pH to at least 7.8 for optimal flocculation.\u003c\/li\u003e\n  \u003cli\u003eTurn off the filter and evenly broadcast 1 lb per 5,000 gallons across the surface.\u003c\/li\u003e\n  \u003cli\u003eAllow particles to settle to the bottom, then vacuum slowly to waste or main drain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen will I see clearer water after adding the product?\u003c\/h3\u003e\n\u003cp\u003eIn most cases, visible clearing occurs within hours as the flocculant gathers particles and they sink. Complete removal requires vacuuming settled debris, so plan time for settling plus a careful vacuuming pass to waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall-clear changes can appear within a few hours after application.\u003c\/li\u003e\n  \u003cli\u003eAllow sufficient time for solids to settle fully before vacuuming.\u003c\/li\u003e\n  \u003cli\u003eResume normal filter operation after you finish vacuuming and debris removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much flocculant should I add for my pool size?\u003c\/h3\u003e\n\u003cp\u003eMeasure your pool volume and dose precisely: Pool Mate recommends 1 pound of product per 5,000 gallons of water. Overdosing isn’t necessary and proper distribution across the water surface improves performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 lb treats 5,000 gallons—scale up proportionally for larger pools.\u003c\/li\u003e\n  \u003cli\u003eBroadcast evenly across the pool surface for uniform action.\u003c\/li\u003e\n  \u003cli\u003eDo not run the filter during settling; vacuum debris away before restarting filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance steps should I take before and after using the clarifier?\u003c\/h3\u003e\n\u003cp\u003ePrep and follow-up increase success: verify pH, clean the filter, and plan for vacuuming. After vacuuming, return the system to normal operation and monitor clarity and filter loads for a few days.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTest and raise pH to at least 7.8 before adding flocculant.\u003c\/li\u003e\n  \u003cli\u003eBackwash or clean filter cartridges to prevent clogged media.\u003c\/li\u003e\n  \u003cli\u003eSlowly vacuum settled debris; then restart filtration and monitor water clarity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 5-Pounds Premium Granular Flocculant is made for homeowners and pool service pros who face persistent cloudiness from fine suspended particles that standard filtration can’t remove alone. It’s ideal when algae, silt, dust, or fine organics have made the water turbid and you want a fast, cost-effective way to collect and remove those solids. This product complements regular sanitizers and clarifiers but is intended specifically to coagulate tiny particles so they settle for vacuuming, not to replace regular chemical balance or sanitization routines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I run my filter after adding Pool Mate flocculant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—turn off the filter while the flocculant settles. Vacuum debris first, then resume normal filtration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pH should my pool be before using this product?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Adjust pool pH to at least 7.8 for the flocculant to bind particles effectively.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54205129490616,"sku":"B0CWVSL15B","price":117.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_ca9c3d04-caf5-43ae-b48d-cd9cebd992e3.jpg?v=1790640124"},{"product_id":"pool-mate-alkalinity-increaser-for-swimming-pools-25-lb-sodium-bicarbonate-fast-dissolving-stabilizer","title":"Pool Mate Alkalinity Increaser for Swimming Pools — 25 lb Sodium Bicarbonate, Fast-Dissolving Stabilizer","description":"\u003cstrong\u003ePool Mate 25-Pound Alkalinity Increaser is a sodium bicarbonate formula designed to raise and stabilize total alkalinity in swimming pools.\u003c\/strong\u003e\n\n\u003cp\u003eKeeping total alkalinity in the correct range reduces pH swings, helps sanitizers work more reliably, and lowers the risk of corrosion, scaling, or surface damage. This 25-pound container delivers sodium bicarbonate that dissolves quickly and is simple to add while your circulation pump runs. Test total alkalinity first and follow the dosing guidelines to reach the right ppm range for your pool type.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this product stabilize my pool water?\u003c\/h3\u003e\n\u003cp\u003eBy increasing total alkalinity, this product buffers the water and resists rapid pH changes that can follow sanitizing adjustments, heavy bather load, or rain. Stable alkalinity supports consistent sanitizer performance and reduces the frequency of corrective pH treatments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains sodium bicarbonate, a proven buffering agent\u003c\/li\u003e\n  \u003cli\u003eDissolves quickly for fast incorporation into the water\u003c\/li\u003e\n  \u003cli\u003eReduces pH “bounce” after chemical additions\u003c\/li\u003e\n  \u003cli\u003eMeasured dosing prevents overcorrection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much should I add and how do I apply it?\u003c\/h3\u003e\n\u003cp\u003eAdd this product directly to the pool while the pump and filter are operating to ensure even distribution. Use a reliable test kit to determine current total alkalinity, then refer to the included dosing table; small, controlled additions avoid overshooting the target range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e11 ounces raises total alkalinity by ~10 ppm per 5,000 gallons\u003c\/li\u003e\n  \u003cli\u003eFollow the manufacturer’s dosing table for specific gallonages\u003c\/li\u003e\n  \u003cli\u003ePour evenly around the deep end with circulation running\u003c\/li\u003e\n  \u003cli\u003eRetest alkalinity after a few hours and again the next day\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat alkalinity levels should I aim for with different pool surfaces?\u003c\/h3\u003e\n\u003cp\u003eTarget ranges vary by pool construction to protect finishes and maintain water balance. Keeping alkalinity within the recommended band helps prevent etching, scaling, and corrosion depending on your surface material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFiberglass pools: 70–100 ppm\u003c\/li\u003e\n  \u003cli\u003eMarcite, painted, tile, or exposed aggregate: 80–120 ppm\u003c\/li\u003e\n  \u003cli\u003eVinyl pools: 120–140 ppm\u003c\/li\u003e\n  \u003cli\u003eAdjust conservatively; retest after each addition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product affect other pool chemicals or equipment?\u003c\/h3\u003e\n\u003cp\u003eRaising alkalinity supports the overall balance of your pool chemistry and can improve sanitizer efficiency over time. Proper alkalinity also helps protect metal components and interior finishes from accelerated wear caused by unstable pH.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps prevent equipment corrosion when kept in range\u003c\/li\u003e\n  \u003cli\u003eReduces plaster etching and scaling risk\u003c\/li\u003e\n  \u003cli\u003eWorks with standard chlorine and bromine sanitizers\u003c\/li\u003e\n  \u003cli\u003eCompatible with routine pool maintenance practices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool Mate 25-Pound Alkalinity Increaser is intended for pool owners, service technicians, and property managers who need a dependable, easy-to-use sodium bicarbonate product to bring total alkalinity into the correct range. It’s suitable for all common pool types—fiberglass, vinyl, plaster, tile, and exposed aggregate—and is especially useful when pH is fluctuating or when you want to protect surfaces and equipment by maintaining balanced water chemistry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can swim after adding alkalinity increaser?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can usually swim once the product has dissolved and circulation has run long enough to distribute it; retest alkalinity and pH first if possible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with every sanitizer type?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this sodium bicarbonate product is compatible with common sanitizers like chlorine and bromine; it helps them perform more consistently by stabilizing alkalinity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54205524017336,"sku":"B0CWVQTPSZ","price":174.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-25lb.jpg?v=1790643917"},{"product_id":"pool-mate-calcium-hardness-increaser-25-lb-granular-stabilizes-protects-pool-surfaces","title":"Pool Mate Calcium Hardness Increaser 25 lb Granular - Stabilizes \u0026 Protects Pool Surfaces","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 25-Pounds Premium Calcium Hardness Increaser is a granular calcium chloride formula designed to raise and stabilize the calcium hardness level in swimming pools safely and quickly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping calcium hardness within the recommended range preserves pool surfaces and equipment while helping water chemistry remain balanced. Low calcium hardness can lead to corrosive water that etches plaster, fades paint, or stresses metal components. Pool Mate's dry granules dissolve into a pre-diluted bucket and are distributed around the pool while the pump runs, letting you correct hardness without introducing cloudiness or excess residues when used as directed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this product to raise calcium hardness safely?\u003c\/h3\u003e\n\u003cp\u003eAdd the product in a diluted form, not directly into the pool, and follow dosing limits to avoid overshooting the target level. Always test hardness before and after treatment and run the circulation system during and for a short time after application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTest calcium hardness with a reliable kit and determine required dose from the included chart.\u003c\/li\u003e\n  \u003cli\u003eDissolve up to 2 lb per 5-gallon bucket of pool water; never add dry product directly to the pool.\u003c\/li\u003e\n  \u003cli\u003eSlowly pour the solution around the pool perimeter while the filter pump is operating.\u003c\/li\u003e\n  \u003cli\u003eFor a 10,000-gallon pool, do not add more than 10 lb within any 2-hour window to prevent rapid shifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat target hardness should I aim for based on my pool type?\u003c\/h3\u003e\n\u003cp\u003eDifferent surfaces tolerate different hardness ranges; choose the correct band to protect your finish. Use the following guidelines to stay within safe limits for your pool material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVinyl pools: aim for 200–300 ppm to avoid scaling while protecting liners.\u003c\/li\u003e\n  \u003cli\u003eTile and exposed-aggregate: 200–400 ppm provides a buffer against staining and etching.\u003c\/li\u003e\n  \u003cli\u003eMarcite, fiberglass, painted surfaces: 250–400 ppm for optimal protection and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much will an ounce or pound change my pool's hardness?\u003c\/h3\u003e\n\u003cp\u003ePool Mate includes a clear dosing reference so you can calculate changes precisely. Small, incremental additions help you reach the target without overshooting and creating scale.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 ounces of product raises calcium hardness about 10 ppm in 5,000 gallons of water.\u003c\/li\u003e\n  \u003cli\u003eUse the package chart to convert target ppm increases into pounds for your pool volume.\u003c\/li\u003e\n  \u003cli\u003eAdd in stages and retest between doses for controlled adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy is maintaining calcium hardness important for pool care?\u003c\/h3\u003e\n\u003cp\u003eBalanced calcium hardness helps protect surfaces and equipment while contributing to overall water stability. Both low and excessively high hardness have consequences, so aim for the recommendations appropriate to your pool’s finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow hardness can promote corrosion, etching, and surface deterioration.\u003c\/li\u003e\n  \u003cli\u003eCorrect hardness reduces the risk of staining and preserves plaster and tile.\u003c\/li\u003e\n  \u003cli\u003eMaintaining recommended levels supports consistent sanitizer effectiveness and reduces maintenance needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 25-Pounds Premium Calcium Hardness Increaser is intended for pool owners and maintenance professionals who need a dependable way to raise and stabilize calcium hardness. It’s suited for all common pool finishes—vinyl, tile, aggregate, plaster, fiberglass, and painted surfaces—and for anyone who tests water chemistry regularly and follows safe dosing procedures. Use it when tests indicate hardness is below the recommended range, and follow label instructions for dilution, application, and maximum addition rates to protect your pool investment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add the product directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Pre-dissolve in a plastic bucket of pool water and then pour slowly around the pool while the pump runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long should I wait to retest after adding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wait at least 2 hours after adding and circulation before retesting, longer if multiple doses were used.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54206714446008,"sku":"B00J7L46FI","price":176.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-bag_b43e51ba-b35a-4e77-9114-6629bc38427c.jpg?v=1790652886"},{"product_id":"pool-mate-pool-metal-remover-concentrated-1-quart-4-pack-sequesters-iron-copper-prevents-stains","title":"Pool Mate Pool Metal Remover Concentrated 1-Quart 4-Pack — Sequesters Iron \u0026 Copper, Prevents Stains","description":"\u003cp\u003e\u003cstrong\u003ePool Mate Metal Free is a concentrated 1-quart sequestrant that removes and prevents metal staining and scaling in pools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for pool owners and service professionals, this concentrated metal remover treats iron, copper, manganese, calcium and other metallic contaminants that cause discoloration, rust stains and scale. Use it when filling a pool, during seasonal openings and closings, or as a monthly maintenance dose to protect plumbing, liners and pool surfaces. The formula is intended to sequester dissolved metals so they remain in solution and can be filtered out or removed by normal pool care procedures.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Metal Free when first filling a new or freshly refilled pool?\u003c\/h3\u003e\n\n\u003cp\u003eAdd Metal Free while the pool is being filled and before you add chlorine to minimize staining from source-water metals. The recommended starting dose is one quart per 10,000 gallons; circulate the water to disperse the product evenly. After treatment, proceed with standard water chemistry adjustments and chlorination.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDosage: 1 quart per 10,000 gallons during fill\u003c\/li\u003e\n  \u003cli\u003eAdd before introducing chlorine\u003c\/li\u003e\n  \u003cli\u003eRun filter to distribute sequestering agent\u003c\/li\u003e\n  \u003cli\u003eThen balance pH and begin regular chlorination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps should I follow to correct already discolored or stained pool water?\u003c\/h3\u003e\n\n\u003cp\u003eFor existing metal-caused discoloration, close the pool, stop chlorination and run the pump while lowering free chlorine to zero. Reduce pH to about 6.8 to help re-dissolve metal particles, add one quart of Metal Free per 10,000 gallons, and circulate overnight until the water clears. Afterward, rebalance pH to the normal 7.2–7.8 range and resume chlorination.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClose pool to swimmers and stop chlorination\u003c\/li\u003e\n  \u003cli\u003eLower pH to ~6.8 to mobilize metals\u003c\/li\u003e\n  \u003cli\u003eAdd 1 quart per 10,000 gallons and circulate overnight\u003c\/li\u003e\n  \u003cli\u003eRestore pH to 7.2–7.8, then restart chlorination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I add Metal Free for regular maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eTo compensate for product loss during backwashing or heavy splash-out, add Metal Free monthly at a reduced maintenance rate. The maintenance guideline is one quart per 20,000 gallons once per month, or as needed based on water source and visible staining. Adjust frequency if you notice recurring stains or test results indicating elevated metals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMonthly maintenance dose: 1 quart per 20,000 gallons\u003c\/li\u003e\n  \u003cli\u003eAdd after major backwash or heavy splash-out\u003c\/li\u003e\n  \u003cli\u003eIncrease frequency when source water contains metals\u003c\/li\u003e\n  \u003cli\u003eMonitor water clarity and stains to guide reapplications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich metals and problems does this product address, and will it harm pool equipment?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate Metal Free sequesters common pool metals including iron, copper, manganese, calcium, nickel, lead, cobalt and silver, helping prevent discoloration, rust staining and scale buildup on surfaces and plumbing. As a sequestrant, it helps keep metals dissolved and less likely to precipitate onto surfaces; it is compatible with normal pool equipment when used as directed. Always follow label instructions to maintain safe chemistry and protect filters and finishes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks on iron, copper, manganese, calcium and more\u003c\/li\u003e\n  \u003cli\u003eHelps reduce rust stains and mineral discoloration\u003c\/li\u003e\n  \u003cli\u003eFormulated to protect plumbing and pool walls from scale\u003c\/li\u003e\n  \u003cli\u003eCompatible with routine pool equipment and operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate Metal Free is aimed at residential and commercial pool owners, service technicians and property managers who use municipal or well water that may contain metals, or who want an insurance step against staining and scale. It's useful at pool openings, after refills, during stain remediation and as part of a monthly maintenance routine to keep water clear and surfaces protected.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I swim immediately after using Metal Free?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. After treatment, rebalance pH and resume chlorination. Swim only when chlorine residual is 1.0–3.0 ppm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Metal Free do I add for a 20,000-gallon pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For initial or corrective treatment, add 2 quarts; monthly maintenance is 1 quart per 20,000 gallons.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54207331434680,"sku":"B00IXRY440","price":137.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label-1-quart-bottle_597742ce-fa37-4141-af2a-6a3862c995b4.jpg?v=1790655458"},{"product_id":"pool-mate-calcium-hardness-increaser-granular-25-lb-raises-hardness-protects-plaster-tile","title":"Pool Mate Calcium Hardness Increaser Granular 25 lb — Raises Hardness, Protects Plaster \u0026 Tile","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 25-Pounds Premium Calcium Hardness Increaser is a dry granular calcium chloride designed to bring your pool's calcium hardness into the recommended 200–400 ppm range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMaintaining proper calcium hardness helps protect plaster, tile, vinyl and fiberglass surfaces from corrosion, etching or staining. This concentrated granular formula dissolves when pre-mixed in a bucket and is intended to be added to pools while the circulation system runs. Always test your water first with a reliable calcium hardness test kit and follow the dosing chart for safe application.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use Pool Mate to adjust my pool's calcium hardness?\u003c\/h3\u003e\n\u003cp\u003eTest your pool water to determine current calcium levels, then dissolve the correct amount of product in a plastic bucket of pool water before adding slowly to the pool perimeter while the pump is on. For best results, never add dry granules directly to the pool and follow the recommended limits for large volume pools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDissolve up to 2 lb of product per 5-gallon bucket of water.\u003c\/li\u003e\n  \u003cli\u003eSlowly pour the dissolved solution around the pool perimeter with circulation running.\u003c\/li\u003e\n  \u003cli\u003eIn a 10,000-gallon pool, do not add more than 10 lb in any 2-hour window.\u003c\/li\u003e\n  \u003cli\u003eRetest after full circulation and adjust gradually if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat calcium hardness levels should I aim for with different pool surfaces?\u003c\/h3\u003e\n\u003cp\u003eTarget hardness varies by finish to balance protection and scale risk. Use these ranges as a guideline and adjust based on your pool type and local water characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVinyl pools: 200–300 ppm recommended to avoid softness and damage.\u003c\/li\u003e\n  \u003cli\u003eTile and exposed aggregate: 200–400 ppm for surface protection.\u003c\/li\u003e\n  \u003cli\u003eMarcite, fiberglass, painted surfaces: 250–400 ppm to reduce etching risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much product raises calcium hardness in my pool?\u003c\/h3\u003e\n\u003cp\u003eThe product is concentrated; small amounts produce measurable increases. One practical reference: 8 ounces of this calcium chloride will raise calcium hardness about 10 ppm in 5,000 gallons of water, though actual change can vary with existing chemistry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 oz ≈ +10 ppm per 5,000 gallons (approximate).\u003c\/li\u003e\n  \u003cli\u003eUse the included dosing chart for precise amounts based on pool volume.\u003c\/li\u003e\n  \u003cli\u003eMake increases in stages and retest between additions to avoid overshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there safety or handling tips I should know?\u003c\/h3\u003e\n\u003cp\u003eHandle the dry granules carefully and avoid inhalation or skin contact. Prepare solution in a plastic bucket, add to water, and keep product away from incompatible materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a plastic bucket filled with pool water to dissolve granules before adding.\u003c\/li\u003e\n  \u003cli\u003eKeep the pump running while adding the solution to ensure even distribution.\u003c\/li\u003e\n  \u003cli\u003eStore the sealed bag in a cool, dry place and keep out of reach of children and pets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 25-Pounds Calcium Hardness Increaser is intended for pool owners, service technicians and maintenance pros who need a reliable way to raise calcium hardness and protect surfaces. It is suitable for vinyl, tile, plaster, exposed aggregate, fiberglass and painted pools when used according to directions and after confirming water chemistry with a test kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate should I add to a 10,000-gallon pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Do not add more than 10 pounds in any 2-hour period; follow the dosing chart and retest after circulation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add the granules directly to the pool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Always dissolve granules in a plastic bucket of pool water before slowly pouring around the pool with circulation running.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54207331467448,"sku":"B07B7ZBCXQ","price":174.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-bag_b9e4dcc0-fa5b-407d-98b8-7f9826396673.jpg?v=1790655451"},{"product_id":"pool-mate-28-ft-classic-dura-guard-winter-pool-cover-for-above-ground-pools-solid-blue-heavy-duty-with-winch-10-year-warranty","title":"Pool Mate 28 ft Classic Dura-Guard Winter Pool Cover for Above-Ground Pools - Solid Blue, Heavy-Duty with Winch \u0026 10-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003ePool Mate's 28 ft Classic Dura-Guard winter cover is a heavy-duty, solid polyethylene cover designed to protect 28-foot round above-ground pools through the offseason.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis winter pool cover is built to keep snow, ice and debris off your pool during colder months. Made from a woven polyethylene scrim with a coated blue topside, the cover resists UV damage and is constructed to sit loosely on the water so it can handle seasonal expansion and ice weight. It includes a winch and cable for perimeter tensioning and offers a 10-year warranty backed by Pool Mate's experience since 1999.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover protect my pool during winter?\u003c\/h3\u003e\n\u003cp\u003eThe Pool Mate Classic Dura-Guard is a solid (non-permeable) winter cover that blocks water and debris from passing through the fabric, helping keep your pool cleaner and easier to reopen in spring. Its heavier material and heat-sealed seams improve durability against snow and ice loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid polyethylene material prevents water passage.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams for improved seam strength and longevity.\u003c\/li\u003e\n  \u003cli\u003eBlue UV-coated topside reduces sun degradation when installed.\u003c\/li\u003e\n  \u003cli\u003e18% heavier construction than typical industry covers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and fit details should I know for a 28 ft cover?\u003c\/h3\u003e\n\u003cp\u003eThe listed pool size is 28 feet round; this cover includes a four-foot overlap so the overall material measures 32 feet across. The overlap makes installation easier and helps the cover sit over the pool rail, but if your pool has an unusually large top rail you should consider ordering the next size up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 28 ft round pools with a 4 ft overlap (32 ft total material).\u003c\/li\u003e\n  \u003cli\u003eOverlap helps accommodate standard top rails and simplifies closure.\u003c\/li\u003e\n  \u003cli\u003eIf top rails are large, choose the larger cover size for a relaxed float.\u003c\/li\u003e\n  \u003cli\u003eNot intended as a summertime debris cover—use only for off-season winter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes with the cover and how is it secured?\u003c\/h3\u003e\n\u003cp\u003eEvery cover includes a winch and cable to thread through the grommets and tighten around the pool perimeter. For added security in high wind areas or when your pool has a deck, Pool Mate recommends optional cover clips, wrap, and vinyl water weights sold separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes a winch and cable for perimeter tensioning through grommets.\u003c\/li\u003e\n  \u003cli\u003eGrommets placed around the edge for secure cable attachment.\u003c\/li\u003e\n  \u003cli\u003eOptional cover clips and cover wrap available for extra fastening.\u003c\/li\u003e\n  \u003cli\u003eUse vinyl water weights on decks to hold cover edges down when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material specs and warranty details?\u003c\/h3\u003e\n\u003cp\u003eThe cover is woven with an 8 x 8 scrim and weighs approximately 2.36 ounces per square yard (about 80 g\/m²), indicators of its strength and expected life. Pool Mate backs this Classic cover with a 10-year warranty and over 25 years of product experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWoven polyethylene scrim: 8 x 8 threads per square inch.\u003c\/li\u003e\n  \u003cli\u003eMaterial weight: roughly 2.36 oz\/yd² (80 g\/m²).\u003c\/li\u003e\n  \u003cli\u003eConstructed 18% heavier than common industry covers.\u003c\/li\u003e\n  \u003cli\u003e10-Year Manufacturer's warranty from Pool Mate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This cover is designed for owners of traditional above-ground round pools who need a reliable winter closure. It suits pools with standard top rails, homeowners in regions that experience snow and ice, and anyone who wants a solid, non-permeable cover with a long warranty. If you have a pool with large rails, a partial deck, or specific wind concerns, consider sizing up or adding the recommended accessories (cover clips, wrap, water weights, or an ice equalizer pillow sold separately) to get the best seasonal protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Pool Mate cover on during the swimming season?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This cover is a solid winter\/off-season cover and is not intended for use as a summer debris cover.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cover include hardware to secure it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A winch and cable are included for attaching through the perimeter grommets; clips and weights are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54208405274808,"sku":"B01H8ESYYE","price":298.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging_58607bf9-b55e-47e9-ba8f-4cb4ada0db9c.jpg?v=1790662873"},{"product_id":"pool-mate-cyanuric-acid-pool-stabilizer-32-lb-bag-reduces-chlorine-loss-easy-dosing","title":"Pool Mate cyanuric acid pool stabilizer 32 lb bag — reduces chlorine loss, easy dosing","description":"\u003cstrong\u003ePool Mate 32-Pounds Premium Pool Stabilizer and Conditioner is a concentrated cyanuric acid formula that slows chlorine loss from sunlight and helps maintain a steady sanitizer level.\u003c\/strong\u003e\n\n\u003cp\u003eKeeping pool chlorine effective during long, sunny days starts with proper stabilization. Pool Mate cyanuric acid adds the protective layer your pool needs so chlorine stays active longer, reducing the frequency of shocking and chemical adjustments. This 32-pound bag is intended for whole-pool treatment, disperses quickly when added through the skimmer or after pre-dissolving, and is paired with simple dosing guidance so you can reach the target cyanuric acid (CYA) range of 40–100 ppm.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I add Pool Mate to a newly filled or refill pool?\u003c\/h3\u003e\n\u003cp\u003eWhen a pool has little or no stabilizer, you can raise the cyanuric acid level quickly with Pool Mate. Use the included chart or a reliable test kit to calculate the dose: for a newly filled pool, add 4 ounces per 1,000 gallons to move toward the 40–100 ppm range. Always ensure your filter is clean and water is circulating while dissolving the product.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd slowly into the skimmer or premix in warm water before pouring into the skimmer.\u003c\/li\u003e\n  \u003cli\u003eRecirculate water continuously for 24 hours for full dissolution.\u003c\/li\u003e\n  \u003cli\u003eTest CYA after 24 hours and adjust with additional small doses if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much does Pool Mate raise cyanuric acid in my pool?\u003c\/h3\u003e\n\u003cp\u003ePool Mate has straightforward dosing relationships that make calculations simple. As a rule of thumb, 6 ounces of this cyanuric acid raises CYA about 10 ppm in 5,000 gallons of water, allowing you to plan bulk additions for a 32-pound supply. Use your pool volume and the product chart to hit the recommended 40–100 ppm range without overshooting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 ounces raises CYA ≈10 ppm per 5,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eCalculate total ounces needed based on pool gallons and current CYA reading.\u003c\/li\u003e\n  \u003cli\u003eAdd incrementally and retest rather than applying the entire bag at once when uncertain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using Pool Mate change how I maintain chlorine and pH?\u003c\/h3\u003e\n\u003cp\u003ePool Mate supports chlorine longevity but does not replace routine sanitizer or pH management. Continue to maintain a free chlorine residual of 2.0–4.0 ppm and a pH between 7.4–7.6 for optimal sanitizer performance and swimmer comfort. Adding stabilizer can lower chlorine consumption by up to 25%, but you should still test and dose chlorine and pH regularly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain free chlorine: 2.0–4.0 ppm.\u003c\/li\u003e\n  \u003cli\u003eKeep pH in the 7.4–7.6 range for best chlorine efficiency.\u003c\/li\u003e\n  \u003cli\u003eRegular testing prevents under- or over-stabilization and keeps chemistry balanced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply Pool Mate for best results?\u003c\/h3\u003e\n\u003cp\u003eFor effective dispersion, add Pool Mate slowly into the skimmer while the pump runs, or dissolve the measured amount in a pail of warm water before adding. Make sure the pool filter is clean and allow at least 24 hours of continuous circulation to fully dissolve the granules. After dissolving, test cyanuric acid and chlorine and fine-tune dosing as required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOption A: Add product slowly to the skimmer with pump running.\u003c\/li\u003e\n  \u003cli\u003eOption B: Premix in warm water, then pour into the skimmer for faster dissolution.\u003c\/li\u003e\n  \u003cli\u003eAlways recirculate 24 hours and retest CYA and chlorine levels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 32-Pounds Premium Pool Stabilizer and Conditioner is designed for pool owners, service professionals, and property managers who need a dependable bulk cyanuric acid product to protect chlorine from UV degradation. It suits aboveground and inground pools of varying sizes where maintaining a consistent CYA level between 40 and 100 ppm improves sanitizer longevity and reduces chlorine burn-off on sunny days. If you regularly test and adjust your pool chemistry and want to cut chlorine usage while keeping water safe and comfortable, this concentrated stabilizer is a practical, high-capacity option.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCyanuric acid for pools\u003c\/li\u003e\n  \u003cli\u003eHelps reduce chlorine loss\u003c\/li\u003e\n  \u003cli\u003eRecommended cyanuric acid level is 40-100 ppm\u003c\/li\u003e\n  \u003cli\u003e6 ounces raises cyanuric acid level 10 ppm per 5,000 gallons of water\u003c\/li\u003e\n  \u003cli\u003eIncreases cyanuric acid level\u003c\/li\u003e\n  \u003cli\u003eDecreases chlorine loss due to sunlight\u003c\/li\u003e\n  \u003cli\u003eReduce chlorine consumption up to 25%\u003c\/li\u003e\n  \u003cli\u003eImproves the effectiveness of chlorine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What CYA range should I aim for with Pool Mate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Aim for 40–100 ppm of cyanuric acid for effective chlorine stabilization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before Pool Mate fully dissolves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Allow 24 hours of continuous circulation for the product to dissolve completely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54208491815096,"sku":"B0CWVQKMWQ","price":302.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-of-bag.jpg?v=1790664146"},{"product_id":"pool-mate-24-ft-classic-dura-guard-winter-pool-cover-for-above-ground-pools-solid-polyethylene-uv-coated-includes-winch","title":"Pool Mate 24 ft Classic Dura-Guard Winter Pool Cover for Above-Ground Pools — Solid Polyethylene, UV-Coated, Includes Winch","description":"\u003cp\u003e\u003cstrong\u003eThe Pool Mate 24 ft Classic Dura-Guard Winter Pool Cover is a heavy-duty, solid polyethylene winter cover designed to protect 24-foot above-ground pools through snow, ice, and off-season debris.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis solid winter pool cover from Pool Mate is engineered for long-term off-season protection of traditional above-ground pools with top rails. Built with a coated blue topside and heat-sealed seams, the Classic Dura-Guard resists UV damage and keeps precipitation out of your pool for easier spring openings. The cover ships with an installation winch and cable and includes a generous 4-foot overlap to simplify fitting and securement.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep water and debris out of my pool?\u003c\/h3\u003e\n\u003cp\u003eThe Pool Mate Classic Dura-Guard is a non-porous polyethylene cover—water and fine debris do not pass through its material. All seams are heat-sealed for continuous protection at joining points, and the coated blue topside adds a UV-resistant barrier to prolong fabric life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid, non-porous construction stops rainfall and leaves at the surface\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams reduce leak paths and increase durability\u003c\/li\u003e\n  \u003cli\u003eUV-coated topside helps prevent sun degradation over seasons\u003c\/li\u003e\n  \u003cli\u003eDesigned to float loosely on the water to avoid stress on seams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover fit my 24 ft above-ground pool and how is it secured?\u003c\/h3\u003e\n\u003cp\u003eThe cover is sized for a 24-foot round pool but includes 4 feet of overlap, making the total diameter approximately 28 feet—this extra material eases installation and provides room for attachment. Pool Mate supplies a winch and cable that thread through perimeter grommets for a snug, wind-resistant fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-foot overlap means an installed cover diameter of about 28 ft\u003c\/li\u003e\n  \u003cli\u003eIncluded winch and cable secure through grommets around the perimeter\u003c\/li\u003e\n  \u003cli\u003eFor pools with decks, place the cover over the deck and use vinyl water weights\u003c\/li\u003e\n  \u003cli\u003eConsider ordering a larger size if your pool has oversized top rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the material and what warranty does it come with?\u003c\/h3\u003e\n\u003cp\u003eThe Classic Dura-Guard uses a woven polyethylene scrim (8 x 8) at 2.36 ounces per square yard, giving it higher fabric strength and puncture resistance than thinner covers. Pool Mate builds this cover about 18% heavier than common industry standards and backs it with a 10-year warranty to support long-term performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.36 oz\/yd² (80 g\/m²) polyethylene weave with 8 x 8 scrim\u003c\/li\u003e\n  \u003cli\u003eConstructed 18% heavier than typical covers for stronger wear resistance\u003c\/li\u003e\n  \u003cli\u003e10-year manufacturer warranty for season-to-season confidence\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams for improved long-term integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation tips and accessories improve performance?\u003c\/h3\u003e\n\u003cp\u003eUse the included winch and cable as the primary securement method through the cover’s grommets. For pools with surrounding decks, balance the cover on top of the deck and place vinyl water weights over the cover; for partial decks, combine deck weights with the perimeter cable under the deck when possible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways use the provided winch and cable; do not substitute other methods\u003c\/li\u003e\n  \u003cli\u003eCover clips and cover wrap are available separately for extra hold-down\u003c\/li\u003e\n  \u003cli\u003eIce equalizer pillows sold separately to reduce ice stress on the cover\u003c\/li\u003e\n  \u003cli\u003eIf heavy top rails create tight fit, size up to avoid seam tension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Pool Mate 24 ft Classic Dura-Guard Winter Pool Cover is made for owners of traditional 24-foot above-ground pools who want a heavy, solid winter cover that keeps water and debris out, resists UV wear, and installs with a supplied winch and cable. It’s a practical choice for regions that see snow and ice, for pools with standard top rails, and for anyone who values a durable cover backed by a long warranty. For decks, partial-decks, or oversized top rails, follow the installation tips or choose the next size up for the best fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cover porous or solid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This is a solid, non-porous polyethylene winter cover that prevents water and fine debris from passing through.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cover include hardware and what is the overlap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a winch and cable and features a 4-foot overlap, making the total cover diameter about 28 feet.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54208548110520,"sku":"B01H8ESYWG","price":246.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-24ft-front-view.jpg?v=1790664984"},{"product_id":"pool-mate-18-x-33-ft-extra-strength-platinum-oval-above-ground-pool-cover-sandstone-uv-coated-heavy-duty-winter-protection","title":"Pool Mate 18 x 33 ft Extra Strength Platinum Oval Above-Ground Pool Cover — Sandstone UV-Coated, Heavy-Duty Winter Protection","description":"\u003cp\u003e\u003cstrong\u003ePool Mate's 18 x 33 ft Extra Strength Platinum Oval Above Ground Pool Cover is a heavy-duty, solid winter cover designed to shield oval above-ground pools from snow, ice, and debris throughout the offseason.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for long-term protection, this Pool Mate winter cover pairs a reinforced polyethylene weave with heat-sealed seams and a UV-resistant sandstone coating. It provides a waterproof barrier that sits over the pool with a generous four-foot overlap to simplify installation and keep the pool untouched until spring. The package includes a winch and cable routed through perimeter grommets to secure the cover; optional clips, wraps and water weights can be added for extra anchoring on decks or in high-wind locations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep my pool safe during winter?\u003c\/h3\u003e\n\u003cp\u003eThe cover blocks water, ice and ordinary debris from entering the pool, preventing contamination and reducing spring cleanup. Its solid construction prevents rain and snow from seeping through the material, and the durable scrim resists tearing under seasonal stresses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid, non-permeable material prevents water passage and limits freeze-thaw damage.\u003c\/li\u003e\n  \u003cli\u003e12 x 12 scrim and 3.7 oz\/yd² (125 g\/m²) polyethylene for increased durability.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams reduce weak points where water or wind could penetrate.\u003c\/li\u003e\n  \u003cli\u003eSandstone-coated topside adds UV resistance to extend material life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my 18 x 33 ft oval above-ground pool and install easily?\u003c\/h3\u003e\n\u003cp\u003eThis cover is sized to fit an 18 x 33 ft oval pool with a four-foot overlap on all sides, resulting in a 22 x 37 ft overall cover dimension. The extra overlap makes positioning simpler and helps accommodate a variety of top rail sizes; if you have an especially tall top rail, consider ordering the next larger size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 4 ft overlap—manufactured cover size is 22 x 37 ft for easier fitting.\u003c\/li\u003e\n  \u003cli\u003eDesigned for traditional above-ground pools with typical top rails.\u003c\/li\u003e\n  \u003cli\u003eWinch and cable included for tensioning through reinforced grommets.\u003c\/li\u003e\n  \u003cli\u003eLeave a bit of float so the cover sits loosely on the water for optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the material and what warranty is offered?\u003c\/h3\u003e\n\u003cp\u003eThe Extra Strength Platinum cover is built 85% heavier than standard covers, using a woven scrim and denser polyethylene to resist wear, punctures and wind stress. Pool Mate supports this construction with a 15-year limited warranty, reflecting the brand's multi-decade experience in pool protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial weight: 3.7 ounces per square yard (125 g\/m²) for robust strength.\u003c\/li\u003e\n  \u003cli\u003e12 x 12 woven scrim increases tear and puncture resistance under load.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams improve seam integrity versus stitched alternatives.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 15-year warranty and Pool Mate's product support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories or installation tips improve performance?\u003c\/h3\u003e\n\u003cp\u003eThe included winch and cable secure the cover through perimeter grommets; in windy locations or where partial decks exist, use water weights and routing under the deck where possible. Pool Mate recommends cover clips and cover wrap for extra security (sold separately) and suggests using an ice equalizer pillow to reduce ice stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the supplied winch and cable to tension cover around grommets evenly.\u003c\/li\u003e\n  \u003cli\u003ePlace vinyl water weights on top of cover when installed over a deck area.\u003c\/li\u003e\n  \u003cli\u003eRun cable under deck if pool has a partial deck to ensure tight anchoring.\u003c\/li\u003e\n  \u003cli\u003eConsider an ice equalizer pillow to protect against ice expansion (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this cover best for? Pool Mate's 18 x 33 ft Extra Strength Platinum Oval Cover is aimed at owners of traditional above-ground oval pools who want a durable, waterproof winter closure that reduces spring maintenance and withstands harsh seasonal conditions. It’s especially useful for pools in high-wind or heavy-snow regions, for owners who prefer a solid safety barrier rather than a mesh debris cover, and for anyone seeking a long-lasting cover backed by a substantial warranty and decades of pool accessory experience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cover waterproof or does water pass through?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This is a solid, non-permeable winter cover designed to block water and snow from passing through the material.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cover include hardware for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the cover includes a winch and cable for securing through perimeter grommets; additional clips and wraps sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54209354498232,"sku":"B010V0UZ0S","price":321.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging-18x33-platinum-sandstone.jpg?v=1790669342"},{"product_id":"pool-mate-18-x-33-ft-industrial-oval-above-ground-pool-winter-cover-taupe-heavy-duty-non-permeable","title":"Pool Mate 18 x 33 ft Industrial Oval Above-Ground Pool Winter Cover — Taupe, Heavy-Duty Non-Permeable","description":"\u003cb\u003eHeavy-duty Pool Mate 18 x 33 ft industrial taupe oval cover — a solid, non-permeable winter cover built to protect above-ground pools through snow and ice.\u003c\/b\u003e\n\n\u003cp\u003eDesigned for traditional above-ground pools with a top rail, this Premium-Grade Taupe winter cover from Pool Mate provides a solid barrier against winter weather. Constructed from industrial polyethylene with heat-sealed seams and a UV-coated taupe topside, it’s sized with a generous 4-foot overlap (actual cover size 22 x 37 ft) to simplify installation and help the cover float loosely on the water surface. The pack includes a winch and cable routed through perimeter grommets for secure attachment; cover clips, wrap, and ice pillows are available separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this Pool Mate cover compared with standard winter covers?\u003c\/h3\u003e\n\n\u003cp\u003eThis industrial model is built heavier than typical covers, using a 4.5 oz per square yard polyethylene with a 14 x 12 woven scrim for strength. All seams are heat sealed to resist separation and the top side is treated to slow UV degradation, increasing lifespan under seasonal exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial weight: 4.5 oz\/yd² (152 g\/m²) for improved tear resistance.\u003c\/li\u003e\n  \u003cli\u003e14 x 12 scrim weave—higher thread count for durability.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams to prevent seam failure over time.\u003c\/li\u003e\n  \u003cli\u003eUV-coated taupe topside to reduce sun damage during shoulder seasons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover keep water and debris out during winter?\u003c\/h3\u003e\n\n\u003cp\u003eThe Pool Mate winter cover is a solid, non-permeable design intended to block water entry and large debris during the off-season. It is not meant to serve as a summer debris cover; it performs best when used to close the pool for winter and protect against snow, ice, and falling leaves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-permeable construction prevents water from passing through the material.\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand snow and ice loads when properly installed.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for in-season debris protection or continuous pool use.\u003c\/li\u003e\n  \u003cli\u003eConsider an ice equalizer pillow (sold separately) for heavy-freeze regions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and secure the 18 x 33 ft oval cover properly?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation centers on the included winch and cable system: run the cable through the perimeter grommets and tighten with the winch to tension the cover. The 4-foot overlap (cover measures 22 x 37 ft including overlap) makes positioning easier; if your pool has an oversized top rail, choose a larger cover size to avoid excessive stress on the material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded winch and cable secure the cover through perimeter grommets.\u003c\/li\u003e\n  \u003cli\u003e4 ft overlap (22 x 37 ft total) simplifies draping and centering.\u003c\/li\u003e\n  \u003cli\u003eUse cover clips or wrap for extra fastening if needed (sold separately).\u003c\/li\u003e\n  \u003cli\u003eFor decks, place vinyl water weights on the cover over the deck area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pool types and conditions is this cover best suited for?\u003c\/h3\u003e\n\n\u003cp\u003eThis cover is intended for traditional oval above-ground pools with a standard top rail and is engineered for off-season closure in regions that experience freezing or heavy precipitation. It is optimized for convenience and longevity rather than daily-use protection during the swim season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest for above-ground oval pools with a conventional top rail.\u003c\/li\u003e\n  \u003cli\u003eNot designed for in-season, everyday debris control or swimmer use.\u003c\/li\u003e\n  \u003cli\u003eFloat the cover loosely on the water; go up one size if top rails are very large.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 20-year warranty for long-term peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners who need a robust, long-lasting winter closure for an 18 x 33 ft oval above-ground pool and want industrial-strength materials, heat-sealed seams, and a secure winch-and-cable fastening system. If you live in an area with snow, ice, or strong winds and prioritize a solid, non-permeable cover with extended warranty protection, this Pool Mate model is tailored to those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Pool Mate 18 x 33 ft cover let water through?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This is a solid, non-permeable winter cover designed to prevent water passage and protect against snow and ice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are fastening accessories included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A winch and cable are included for securing the cover; clips, wrap, and ice pillows are available separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54209561460920,"sku":"B07DX4TZMS","price":459.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging-18x33-oval-winter-cover.jpg?v=1790671054"},{"product_id":"pool-mate-15-x-30-ft-extra-strength-oval-above-ground-pool-cover-sandstone-solid-winter-cover-winch-included","title":"Pool Mate 15 x 30 ft Extra Strength Oval Above-Ground Pool Cover — Sandstone Solid Winter Cover, Winch Included","description":"\u003cp\u003e\u003cstrong\u003ePool Mate's 15 x 30 ft Extra Strength Platinum Oval Above Ground Pool Cover is a heavy-duty, solid winter cover designed to shield oval above-ground pools from snow, ice and debris throughout the off-season.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis winter cover is built for long-term protection: a tightly woven, extra-strength polyethylene fabric with heat-sealed seams and a UV-resistant sandstone topcoat. It includes a winch and cable for perimeter attachment, a four-foot overlap for easier installation, and a 15-year warranty — all intended for traditional above-ground pools with conventional top rails. The cover is solid (non-permeable), so it keeps rain and melting snow out of the pool water and helps prevent the weight and deterioration that can come from standing water throughout winter months.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep my pool protected over winter?\u003c\/h3\u003e\n\u003cp\u003eThe solid, non-porous construction prevents water and most debris from penetrating the pool, reducing contamination and the need for major cleanup come spring. Heat-sealed seams and a coated topside add resistance to UV degradation and seam failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid polyethylene material blocks water infiltration and debris.\u003c\/li\u003e\n  \u003cli\u003e12 x 12 scrim weave and 3.7 oz\/yd² material for enhanced durability.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams reduce leak points and extend life span.\u003c\/li\u003e\n  \u003cli\u003eSandstone topcoat protects against UV fading and weathering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover fit my 15 x 30 ft oval above-ground pool easily?\u003c\/h3\u003e\n\u003cp\u003eThis model is sized to fit a 15 x 30 ft oval pool with a built-in four-foot overlap on every edge, giving you 19 x 34 ft overall material for simpler drape and fastening. If your pool has an especially tall top rail or large deck lip, you may want to size up for easier float and less stress on the seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded 4 ft overlap helps with installation and secure fit.\u003c\/li\u003e\n  \u003cli\u003eOverall cover dimensions: 19 x 34 ft including overlap.\u003c\/li\u003e\n  \u003cli\u003eDesigned to float loosely on pool water — avoid excessive tension.\u003c\/li\u003e\n  \u003cli\u003eConsider a larger cover size for oversized rails or bulky decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and accessories are included and recommended?\u003c\/h3\u003e\n\u003cp\u003ePool Mate supplies a winch and cable that thread through perimeter grommets so you can tension the cover and lock it down. For pools with decks or partial decking, add vinyl water weights or cover clips and wrap to improve anchoring and reduce strain on the cable; ice-equalizer pillows are sold separately for heavy-freeze regions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWinch and cable included for perimeter securing through grommets.\u003c\/li\u003e\n  \u003cli\u003eUse vinyl water weights on decks to hold the cover in place.\u003c\/li\u003e\n  \u003cli\u003eCover clips and cover wrap are recommended for extra security (sold separately).\u003c\/li\u003e\n  \u003cli\u003eIce equalizer pillows available separately to reduce ice pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the material and what warranty does it have?\u003c\/h3\u003e\n\u003cp\u003eThis Extra Strength edition uses a denser scrim and heavier fabric than industry-standard covers, rated at approximately 125 g\/m² with a 12 x 12 scrim. Pool Mate backs the cover with a 15-year warranty, reflecting its design for repeated seasonal use and resistance to the wear typical of winter storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra-strength polyethylene, 3.7 oz\/yd² (approximately 125 g\/m²).\u003c\/li\u003e\n  \u003cli\u003e12 x 12 scrim weave for tensile strength and tear resistance.\u003c\/li\u003e\n  \u003cli\u003e85% heavier construction than typical industry covers.\u003c\/li\u003e\n  \u003cli\u003e15-year manufacturer warranty for long-term peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate's 15 x 30 ft Extra Strength Platinum Oval cover is aimed at owners of traditional oval above-ground pools who want a solid, winter-only cover that blocks water and debris, installs with minimal fuss and is built to last multiple seasons. It’s especially suited to yards in cold climates where snow and ice load are concerns, and for pool owners who prefer a non-permeable, low-maintenance off-season solution. If you need a year-round debris cover for splashing season, look for a permeable summer or mesh option; this model is intended for winter closure use only.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cover waterproof or allow water through?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cover is solid and non-permeable, so it prevents water from passing through the material.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation hardware come with the cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, a winch and cable are included; additional clips, wrap, or water weights are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54209643774136,"sku":"B010V0TUC2","price":251.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-packaging-15x30.jpg?v=1790671610"},{"product_id":"pool-mate-metal-out-pool-metal-remover-1-quart-4-pack-concentrated-chelating-treatment-to-prevent-stains-scale","title":"Pool Mate Metal Out Pool Metal Remover 1-Quart 4-Pack — Concentrated Chelating Treatment to Prevent Stains \u0026 Scale","description":"\u003cstrong\u003ePool Mate Metal Out 1-Quart 4-Pack is a concentrated chelating treatment that removes and prevents metal stains, scale, and discoloration in pool water.\u003c\/strong\u003e\n\n\u003cp\u003eMade in the USA and formulated to bind and sequester metals like iron, manganese, copper and more, this concentrated liquid helps avoid staining and cloudy water caused by metal reactions with oxidizers. It’s ready-to-use, compatible with chlorine, algaecides and stabilizers when added separately, and intended both for initial pool openings and ongoing maintenance to reduce mineral precipitation and scale formation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Pool Mate Metal Out stop stains and colored water?\u003c\/h3\u003e\n\u003cp\u003eThe formula chelates dissolved metals so they stay in solution instead of oxidizing and depositing as stains or discoloration. That keeps metals from reacting when you add chlorine or shock treatments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBinds iron, manganese, copper, cobalt, nickel, lead and silver to prevent oxidation.\u003c\/li\u003e\n  \u003cli\u003eWorks before and after chemical additions when added independently.\u003c\/li\u003e\n  \u003cli\u003eUse after testing metal levels to dose correctly for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I dose this product for new pools or pool openings?\u003c\/h3\u003e\n\u003cp\u003eFor prevention at startup, add Pool Mate Metal Out before any other chemicals. The recommended preventive dose is simple and scales with pool volume.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd 1.5 oz per 1,000 gallons prior to other chemical additions.\u003c\/li\u003e\n  \u003cli\u003eRecirculate the water thoroughly for uniform distribution before continuing treatment.\u003c\/li\u003e\n  \u003cli\u003eIncrease dose proportionally if metals exceed 1 ppm, following water test results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I do for discolored water or existing stains?\u003c\/h3\u003e\n\u003cp\u003eFirst confirm the discoloration is metal-related. If metals are present, treat according to concentration, then balance pH and recirculate to clear the water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIf metals are under 1 ppm, start with 1.5 oz per 1,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eFor higher concentrations, increase dosage proportionally to dealer or test recommendations.\u003c\/li\u003e\n  \u003cli\u003eAdjust pH to 7.2–7.6 after treatment and continue recirculation until clarity returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does regular use prevent scale and mineral buildup?\u003c\/h3\u003e\n\u003cp\u003eRegular, low-dose applications help control hardness minerals and reduce precipitation when other chemicals are added. The product limits calcium and other mineral solids that form scale.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFor scale prevention add 3\/4 oz per 1,000 gallons and recirculate at least six hours.\u003c\/li\u003e\n  \u003cli\u003eFor weekly maintenance, add 1–2 oz per 5,000 gallons each week.\u003c\/li\u003e\n  \u003cli\u003eHelps limit buildup from routine chemical additions, preserving surfaces and equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate Metal Out is intended for pool owners, service professionals, and dealers dealing with metal-related staining, rusty or discolored water, and mineral scale. It’s suitable for new pool startups as a preventive measure and for routine maintenance programs where metals or hardness minerals are present. Always test water and follow dosing guidelines; add this product separately from other chemicals and maintain proper pH and circulation for optimal results.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1–2 ounces per 5,000 gallons weekly for maintenance\u003c\/li\u003e\n  \u003cli\u003ePremium stain and mineral inhibitor\u003c\/li\u003e\n  \u003cli\u003eSuper-concentrated formula for stain and discoloration prevention\u003c\/li\u003e\n  \u003cli\u003eHelps control calcium, cobalt, copper, iron, lead, manganese, nickel and silver\u003c\/li\u003e\n  \u003cli\u003ePrevents scale build-up and mineral precipitation when used regularly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Pool Mate Metal Out with chlorine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — add Pool Mate separately; it won’t interfere with chlorine, algaecides, or stabilizers when applied as directed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much should I add for weekly maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Add 1–2 ounces per 5,000 gallons each week to help prevent scale and mineral precipitation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54209793360056,"sku":"B0F79VC76Q","price":175.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-label_74cb6e75-53eb-4d7c-b0e4-158699c4e8c8.jpg?v=1790672338"},{"product_id":"pool-mate-pool-stabilizer-cyanuric-acid-28-lb-fast-dissolving-granular-conditioner-extends-chlorine-life","title":"Pool Mate Pool Stabilizer Cyanuric Acid 28 lb – Fast-Dissolving Granular Conditioner, Extends Chlorine Life","description":"\u003cp\u003e\u003cstrong\u003ePool Mate 28-Pounds Premium Pool Stabilizer and Conditioner is a concentrated cyanuric acid formula designed to slow chlorine degradation from sunlight and extend your sanitizer’s effectiveness.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping free chlorine active in outdoor pools is a constant battle against UV rays. This granular cyanuric acid product dissolves quickly to establish a protective buffer in pool water, helping your chlorine last longer and work more efficiently. Use a test kit to check cyanuric acid (CYA) levels and follow the dosing chart provided to reach the recommended range of 40–100 ppm.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will the stabilizer dissolve and start working?\u003c\/h3\u003e\n\u003cp\u003eThe granules disperse fast when added to the skimmer or a warm-water pre-mix, and complete dissolution usually occurs after continuous recirculation for 24 hours. Proper filtration and circulation help the product spread evenly so it can protect the entire pool volume.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd slowly into the skimmer or premix in a pail of warm water.\u003c\/li\u003e\n  \u003cli\u003eRun the pump continuously for 24 hours to fully dissolve.\u003c\/li\u003e\n  \u003cli\u003eEnsure the filter is clean before application for best distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dose should I use to reach the recommended 40–100 ppm range?\u003c\/h3\u003e\n\u003cp\u003eIf your pool is new, recently refilled, or currently has no stabilizer, add 4 ounces of this product per 1,000 gallons to begin building toward the 40–100 ppm target. Use the included chart or a CYA test to fine-tune additional additions until you reach the desired level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInitial addition for unstabilized pools: 4 oz per 1,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eReference: 6 ounces of product raises CYA roughly 10 ppm per 5,000 gallons.\u003c\/li\u003e\n  \u003cli\u003eTest CYA after 24 hours and adjust slowly to avoid overshooting the target.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this stabilizer affect chlorine use and pool chemistry?\u003c\/h3\u003e\n\u003cp\u003eCyanuric acid acts as a sunlight shield for free chlorine, reducing photodegradation and often cutting chlorine consumption by as much as 25% under typical outdoor conditions. It does not replace chlorine but helps your sanitizer remain active longer; maintain free chlorine at 2.0–4.0 ppm and pH at 7.4–7.6 for balanced sanitation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces chlorine loss due to UV exposure.\u003c\/li\u003e\n  \u003cli\u003eHelps improve chlorine effectiveness when combined with correct chlorine residuals.\u003c\/li\u003e\n  \u003cli\u003eRecommended CYA level: 40–100 ppm for outdoor pools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply it safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eAdd the stabilizer slowly to the skimmer while the pump runs or dissolve it first in warm water and then pour it into the skimmer for easier distribution. Keep the pump running and the filter clean to promote full dissolution and uniform CYA levels throughout the pool.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd product slowly into the skimmer or premix in warm water.\u003c\/li\u003e\n  \u003cli\u003eRun circulation continuously for at least 24 hours after application.\u003c\/li\u003e\n  \u003cli\u003eMeasure CYA with a reliable test kit and adjust gradually to maintain 40–100 ppm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate 28-Pounds Premium Pool Stabilizer and Conditioner is aimed at owners of outdoor inground and aboveground pools who want to reduce chlorine loss from sunlight, extend their sanitizer’s life, and lower routine chlorine consumption. It’s suitable for anyone comfortable testing and adjusting cyanuric acid levels, maintaining a 2.0–4.0 ppm chlorine residual, and keeping pH between 7.4 and 7.6. Ideal for seasonal prep, new fills, or stabilizer maintenance when CYA testing shows levels below the recommended range.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCyanuric acid for pools\u003c\/li\u003e\n  \u003cli\u003eHelps reduce chlorine loss\u003c\/li\u003e\n  \u003cli\u003eRecommended cyanuric acid level is 40-100 ppm\u003c\/li\u003e\n  \u003cli\u003e6 ounces raises cyanuric acid level 10 ppm per 5,000 gallons of water\u003c\/li\u003e\n  \u003cli\u003eIncreases cyanuric acid level\u003c\/li\u003e\n  \u003cli\u003eDecreases chlorine loss due to sunlight\u003c\/li\u003e\n  \u003cli\u003eReduce chlorine consumption up to 25%\u003c\/li\u003e\n  \u003cli\u003eImproves the effectiveness of chlorine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much Pool Mate should I add to my pool initially?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For pools with no stabilizer, add 4 ounces per 1,000 gallons, then test CYA and adjust to reach 40–100 ppm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until the stabilizer is fully effective?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Allow continuous circulation for 24 hours after application; test CYA after that to confirm levels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54209813053624,"sku":"B01N7YYX3D","price":251.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-front-bag_e96ae74a-873a-4f72-ba07-6bfb17dbba2e.jpg?v=1790672597"},{"product_id":"pool-mate-24-ft-extra-strength-platinum-above-ground-pool-cover-solid-winch-cable-15-year-warranty","title":"Pool Mate 24 ft Extra Strength Platinum Above-Ground Pool Cover — Solid, Winch \u0026 Cable, 15-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003ePool Mate's 24 ft Extra Strength Platinum winter cover is a heavy-duty solid cover designed to protect 24-foot round above-ground pools through the off-season.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis extra-strength Pool Mate cover is built from heavy polyethylene with heat-sealed seams and a UV-resistant sandstone coating to block snow, ice and debris during winter months. It comes with a four-foot overlap for easier installation, an included winch and cable system to fasten the cover through perimeter grommets, and construction designed to float loosely on the water so it won’t be stressed by ice movement. Backed by Pool Mate’s long running experience and a 15-year warranty, the cover is intended for traditional above-ground pools with a standard top rail.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover protect my pool over winter?\u003c\/h3\u003e\n\u003cp\u003eThe Pool Mate Extra Strength cover is a solid (non-permeable) barrier that prevents water, snow and organic debris from entering the pool. Its dense woven scrim and coated sandstone top repel UV exposure and block winter precipitation from passing through to the pool water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid polyethylene construction keeps rain and snow out.\u003c\/li\u003e\n  \u003cli\u003e12 x 12 woven scrim and 3.7 oz\/yd² material for durability.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams reduce leak points compared with sewn seams.\u003c\/li\u003e\n  \u003cli\u003eUV-coated topside helps resist sun degradation during storage and season transitions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my above-ground pool and how is it installed?\u003c\/h3\u003e\n\u003cp\u003eThis model is sized for 24 ft round pools and includes a four-foot overlap, making the overall diameter 28 ft. The included winch and cable secure the cover through perimeter grommets; for decks or special rail profiles you may need to size up to avoid tension on the cover.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for traditional above-ground pools with standard top rails.\u003c\/li\u003e\n  \u003cli\u003eFour-foot overlap simplifies placement and provides extra material for attachment.\u003c\/li\u003e\n  \u003cli\u003eWinch and cable included for tightening and perimeter security.\u003c\/li\u003e\n  \u003cli\u003eIf your top rail is especially large, consider ordering the next size up to ensure a loose floating fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Pool Mate Platinum cover and what extras are recommended?\u003c\/h3\u003e\n\u003cp\u003ePool Mate builds this Extra Strength cover at approximately 85% heavier than industry standard materials, using a 12 x 12 scrim and a material weight of about 3.7 oz\/yd² (125 g\/m²). The cover is intended for repeated seasonal use and is supported by a 15-year warranty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial woven with 12 x 12 scrim for increased tear resistance.\u003c\/li\u003e\n  \u003cli\u003eConstructed 85% heavier than typical covers for longer life expectancy.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams for improved leak prevention.\u003c\/li\u003e\n  \u003cli\u003eOptional accessories: cover clips, cover wrap, ice-equalizing pillows (sold separately) improve long-term performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I secure the cover in windy or decked installations?\u003c\/h3\u003e\n\u003cp\u003eThe cover includes a winch and cable system that threads through perimeter grommets to anchor the cover; this system is effective in high-wind locations when installed per instructions. For pools with decks, using vinyl water weights on top of the cover or routing the cable under the deck will add stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the included winch and cable through grommets to tension the perimeter.\u003c\/li\u003e\n  \u003cli\u003ePlace vinyl water weights on top for pool decks or partial decks.\u003c\/li\u003e\n  \u003cli\u003eRun the cable under deck edges when possible for a secure fit.\u003c\/li\u003e\n  \u003cli\u003eCover clips and wrap are recommended for added fastening, available separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pool Mate 24 ft Extra Strength Platinum winter cover is for above-ground pool owners who want a solid, heavy-duty offseason barrier that blocks water and debris and stands up to wind, snow and ice. It suits traditional round pools with standard top rails and is ideal for anyone who prefers a looser, floating winter cover with an included winch-and-cable fastening system and an extended overlap to simplify installation. If you need a debris cover for summer use or have a nontraditional rail, consider alternate products or sizing up for a comfortable fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cover waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's a solid, non-permeable winter cover that prevents water and snow from passing through.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cover include hardware for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — a winch and cable are included; clips, wrap, and ice pillows are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54209823277240,"sku":"B010V0RX8U","price":202.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-24ft-front-view_07f3cf85-4b41-40b0-89a2-c3e96d0d3a8a.jpg?v=1790672700"},{"product_id":"pool-mate-30-ft-extra-strength-platinum-above-ground-pool-winter-cover-solid-heavy-duty-winch-included","title":"Pool Mate 30 ft Extra Strength Platinum Above-Ground Pool Winter Cover — Solid, Heavy-Duty, Winch Included","description":"\u003cp\u003e\u003cstrong\u003eThe Pool Mate 30 ft Extra Strength Platinum Pool Cover is a heavy-duty solid winter cover designed to protect 30-foot above-ground pools from snow, ice and debris during the off-season.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to last, this Pool Mate winter cover combines a tough woven polyethylene fabric, reinforced seams and a complete fastening system so your above-ground pool stays secure and clean through winter. The cover is solid (non-permeable), includes a four-foot overlap for easier installation, and ships with a winch and cable for perimeter attachment. Pool Mate backs this cover with a 15-year warranty and leverages decades of pool-cover design to deliver reliable offseason protection.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep my above-ground pool protected over winter?\u003c\/h3\u003e\n\n\u003cp\u003eThis Pool Mate cover is a solid, non-permeable barrier that prevents water and most debris from passing through the material. The coated sandstone top resists UV degradation while the extra-heavy polyethylene fabric resists tearing under snow and ice loads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid construction stops water penetration and limits algae triggers.\u003c\/li\u003e\n  \u003cli\u003eExtra-strength 3.7 oz\/yd² woven polyethylene with 12x12 scrim for durability.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams prevent seam failure and extend service life.\u003c\/li\u003e\n  \u003cli\u003eCoated topside reduces UV damage and material breakdown.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the cover installed and secured?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover arrives with a winch and cable so you thread the cable through the grommets and tighten around the pool perimeter. The cover’s four-foot overlap simplifies draping and gives room to adjust—use cover clips or wrap (sold separately) and water weights on decks when needed for extra security.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes winch and cable for perimeter attachment through grommets.\u003c\/li\u003e\n  \u003cli\u003eFour-foot overlap (34 ft total including overlap) eases installation.\u003c\/li\u003e\n  \u003cli\u003eRecommended use of water weights on decks and optional cover clips for added hold.\u003c\/li\u003e\n  \u003cli\u003eDesigned to float loosely on water—consider one size up for large top rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this \"extra strength\" compared with standard covers?\u003c\/h3\u003e\n\n\u003cp\u003ePool Mate’s Extra Strength cover is built 85% heavier than typical industry standard covers, using a high-scrim woven fabric and reinforced construction. These choices increase tear resistance and longevity under winter stresses like snow, ice and wind.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial weight of 125 g\/m² (3.7 oz\/yd²) for improved toughness.\u003c\/li\u003e\n  \u003cli\u003e12 x 12 scrim weave gives structural stability and tear resistance.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams and coated topside for extra weather protection.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 15-year manufacturer warranty for peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this cover on pools with decks or unusual rail sizes?\u003c\/h3\u003e\n\n\u003cp\u003eYes—this cover works with most traditional above-ground pools and top rails, but planning helps. For pools with decks, place water weights on the deck side of the cover; for large rails, consider sizing up to avoid stress on the fabric when the cover floats.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks best on traditional above-ground pools with standard top rails.\u003c\/li\u003e\n  \u003cli\u003eUse vinyl water weights on decks to hold cover in place.\u003c\/li\u003e\n  \u003cli\u003eRun winch cable under partial decks where possible to secure perimeter.\u003c\/li\u003e\n  \u003cli\u003eChoose a larger cover size if your top rail is unusually tall or bulky.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners with a 30 ft round above-ground pool who want a rugged, long-lasting winter cover that minimizes winter water infiltration and holds up in windy or snowy conditions. Ideal for owners who prefer a solid cover with easy installation hardware and a long manufacturer warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 30 ft cover include installation hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The cover ships with a winch and cable for securing through the grommets; clips and wrap are optional and sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty comes with this Pool Mate winter cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Pool Mate Extra Strength cover includes a 15-year manufacturer warranty for material and workmanship.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54210100461752,"sku":"B010V0SQIG","price":387.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-30ft-cover-installed.jpg?v=1790674698"},{"product_id":"pool-mate-28-ft-extra-strength-platinum-above-ground-pool-cover-solid-winter-shield-uv-coated-sandstone","title":"Pool Mate 28 ft Extra Strength Platinum Above-Ground Pool Cover — Solid Winter Shield, UV-Coated Sandstone","description":"\u003cp\u003e\u003cstrong\u003ePool Mate's 28 ft Extra Strength Platinum pool cover is a solid, non-porous winter cover engineered to protect above-ground pools through the off-season while including a 4-foot overlap, winch, and cable for secure installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty Pool Mate cover is built for above-ground, traditional top-rail pools that need a durable winter shield against snow, ice and debris accumulation. Constructed from thick polyethylene with a reinforced scrim, heat-sealed seams, and a UV-coated sandstone topside, it is designed to resist tearing, block water penetration, and withstand high-wind conditions. Order by your pool size so the 4-foot overlap fits correctly; for large top rails you may wish to upsize to avoid excess stress on the material.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep winter water and debris out of my pool?\u003c\/h3\u003e\n\n\u003cp\u003eThe Pool Mate Platinum is a solid (non-porous) winter cover, which means its fabric does not allow water to pass through. Heat-sealed seams and a UV-treated top layer enhance durability so snow and slush sit on the cover rather than soaking through into the pool water.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid polyethylene membrane blocks precipitation and debris\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams reduce leak points\u003c\/li\u003e\n  \u003cli\u003eUV-coated sandstone topside resists sun degradation\u003c\/li\u003e\n  \u003cli\u003eDesigned for snow and ice accumulation without letting water through\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this cover extra strength compared with standard covers?\u003c\/h3\u003e\n\n\u003cp\u003eThis model uses heavier material and a tighter scrim weave than typical covers. The fabric weighs approximately 3.7 ounces per square yard (125 grams per square meter) and is woven with a 12 x 12 scrim, yielding greater tear resistance and long-term performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial weight: ~3.7 oz\/yd² (125 g\/m²)\u003c\/li\u003e\n  \u003cli\u003e12 x 12 scrim weave for reinforced strength\u003c\/li\u003e\n  \u003cli\u003eManufactured 85% heavier than industry standard options\u003c\/li\u003e\n  \u003cli\u003eBacked by a 15-year limited warranty for season-to-season reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and secure the cover so it performs in wind and on decks?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover ships with a winch and cable that thread through perimeter grommets to anchor the cover around the pool. For pools with decks, place the cover over the pool and add vinyl water weights on top of the deck area; where possible run the cable under the deck to keep tension off the rail.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes winch and cable for perimeter attachment through grommets\u003c\/li\u003e\n  \u003cli\u003eFour-foot overlap simplifies installation and ensures coverage (32 ft overall size)\u003c\/li\u003e\n  \u003cli\u003eUse vinyl water weights on decks or partial decks for added hold-down\u003c\/li\u003e\n  \u003cli\u003eConsider upsizing if your top rail is unusually tall to avoid stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover work on my above-ground pool year after year?\u003c\/h3\u003e\n\n\u003cp\u003eYes — Pool Mate engineered this extra-strength cover for seasonal winter use and longevity, not as a summer debris cover. Proper installation, avoiding excessive tension, and adding recommended accessories like water weights will maximize lifespan and performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIntended for off-season winter use only, not daily summer debris protection\u003c\/li\u003e\n  \u003cli\u003eFloat the cover loosely on the water to reduce edge stress\u003c\/li\u003e\n  \u003cli\u003eIce-equalizing pillows and extra securing accessories sold separately\u003c\/li\u003e\n  \u003cli\u003eFollow sizing guidance to ensure comfort and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool Mate's 28 ft Extra Strength Platinum cover is aimed at owners of traditional above-ground, round pools who want a heavy-duty winter solution that resists water penetration and stands up to rough weather. It's ideal for people who prefer a long-lasting, easy-to-install cover with a generous 4-foot overlap, included winch and cable, and an industry-leading 15-year warranty for season-after-season protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pool Mate cover porous or solid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This cover is solid (non-porous) and blocks water from passing through, built for winter off-season protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cover include everything needed to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes a winch and cable plus perimeter grommets; additional water weights or clips are recommended but sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54210158919864,"sku":"B010V0RWMM","price":346.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-cover-front-packaging-28ft.jpg?v=1790675512"},{"product_id":"pool-mate-18-ft-extra-strength-platinum-above-ground-pool-winter-cover-sandstone-uv-coated-heavy-duty-with-winch-4-ft-overlap","title":"Pool Mate 18 ft Extra Strength Platinum Above-Ground Pool Winter Cover – Sandstone UV-Coated, Heavy-Duty with Winch \u0026 4 ft Overlap","description":"\u003cp\u003e\u003cstrong\u003ePool Mate's 18 ft Extra Strength Platinum winter cover is a solid, heavy-duty above-ground pool cover designed to block water, snow, and debris throughout the off-season.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for round above-ground pools, this Pool Mate cover combines extra-thick woven polyethylene, heat-sealed seams and a UV-resistant sandstone coating to deliver winter protection you can rely on year after year. It includes a four-foot overlap for easier installation, a winch and cable system for secure attachment, and robust material specs that outpace common industry covers. Use this cover for seasonal closures, not as a summer debris cover.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep my pool protected all winter?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover is a solid (non-permeable) winter barrier that prevents rain and melted snow from passing through the material, reducing water contamination and chemical loss. Heavy woven scrim and heat-sealed seams minimize rips and seam failures, while the coated sandstone top resists UV degradation during extended storage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid polyethylene fabric blocks water infiltration and debris entry.\u003c\/li\u003e\n  \u003cli\u003e12 x 12 scrim weave improves tear resistance and long-term durability.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams reduce weak points and leaking at joins.\u003c\/li\u003e\n  \u003cli\u003eUV-coated topside protects the cover from sun damage during the off-season.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my 18 ft above-ground pool and how easy is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThis model is sized for an 18 ft round pool and includes a full four-foot overlap (22 ft overall) to make draping and securing simpler, even if your top rail is slightly larger. The package provides a winch and cable to thread through perimeter grommets so you can tighten and anchor the cover properly; for some decks or large rails, sizing up may be advisable.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFour-foot overlap (cover measures 22 ft including overlap) for easier placement.\u003c\/li\u003e\n  \u003cli\u003eIncluded winch and cable secure the cover through perimeter grommets.\u003c\/li\u003e\n  \u003cli\u003eIf you have a tall or wide top rail, consider the next size up to avoid stress on the material.\u003c\/li\u003e\n  \u003cli\u003eOptional cover clips, cover wrap, and vinyl water weights (sold separately) give added anchoring options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and warranty back this cover?\u003c\/h3\u003e\n\n\u003cp\u003eThe Extra Strength Platinum uses a heavy woven polyethylene that weighs approximately 3.7 oz per square yard (125 g\/m²) and a 12 x 12 scrim for improved robustness. Pool Mate manufactures these covers with roughly 85% more material than many competitors and supports them with an industry-leading 15-year warranty.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExtra Strength polyethylene, 3.7 oz\/yd² (125 g\/m²) material weight.\u003c\/li\u003e\n  \u003cli\u003e12 x 12 woven scrim for enhanced tear resistance.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams and UV-coated sandstone top for longevity.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 15-year warranty from Pool Mate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I secure and care for the cover during winter?\u003c\/h3\u003e\n\n\u003cp\u003eUse the provided winch and cable to tension the cover through the grommets, and allow the cover to float loosely on the water surface so it can handle ice and snow without excess stress. For pools with decks, place vinyl water weights on top of the cover where it lies over the deck; for partial decks, route the cable under the deck if possible. Avoid leaving sharp objects on the cover and remove heavy snow accumulation when safe to do so.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAlways use the included winch and cable for perimeter security.\u003c\/li\u003e\n  \u003cli\u003eEnsure cover can float freely; go up a size for very large top rails.\u003c\/li\u003e\n  \u003cli\u003eUse water weights or clips (sold separately) for decked pools.\u003c\/li\u003e\n  \u003cli\u003eClear excessive snow to prevent prolonged heavy loads on the material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pool Mate 18 ft Extra Strength Platinum winter cover is aimed at above-ground pool owners who want a durable, water-blocking seasonal cover with easy installation. It's well suited for homeowners in climates with freezing winters, snow load, or strong winds who need a long-lasting cover backed by a long warranty and straightforward anchoring hardware. If you need a debris-only or summer safety cover, consider a different product; this cover is optimized for off-season winter protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cover permeable to rain or melting snow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the Pool Mate Platinum is a solid, non-permeable winter cover designed to block water from passing through the material.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cover include hardware for securing it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — a winch and cable are included to secure the cover through the grommets; clips and water weights are optional and sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54210158985400,"sku":"B010V0RBDW","price":168.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-18ft-front-packaging.jpg?v=1790675512"},{"product_id":"pool-mate-18-x-33-ft-oval-winter-above-ground-pool-cover-classic-dura-guard-blue-with-4-ft-overlap-heavy-duty","title":"Pool Mate 18 x 33 ft Oval Winter Above-Ground Pool Cover — Classic Dura-Guard Blue with 4 ft Overlap, Heavy-Duty","description":"\u003cb\u003ePool Mate's 18 x 33 ft Classic Dura-Guard is a solid, heavy-duty winter cover designed for oval above-ground pools, offering a four-foot overlap, sewn heat-sealed seams, and a winch-and-cable fastening system for secure off-season protection.\u003c\/b\u003e\n\n\u003cp\u003eThis durable polyethylene winter cover is built to shield oval above-ground pools from snow, ice and debris throughout the off-season. Constructed with an 8x8 scrim woven fabric and a material weight of 2.36 oz\/yd² (80 g\/m²), the Classic Dura-Guard cover adds extra strength over industry standard and includes features intended to simplify installation and improve longevity.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover keep winter water and debris out of my pool?\u003c\/h3\u003e\n\u003cp\u003eThe Pool Mate Classic Dura-Guard is a solid, non-permeable cover that prevents water from passing through its material, limiting direct snowfall and debris from entering the pool. Heat-sealed seams improve durability at joins, while the coated blue topside resists UV damage during shoulder seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid polyethylene construction that blocks water penetration.\u003c\/li\u003e\n  \u003cli\u003eHeat-sealed seams reduce weak points where leaks can start.\u003c\/li\u003e\n  \u003cli\u003eBlue UV-coated topside slows sun degradation during storage.\u003c\/li\u003e\n  \u003cli\u003eDesigned to float loosely on water to accommodate freeze-thaw movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes sizing and installation easier for an 18 x 33 ft oval pool?\u003c\/h3\u003e\n\u003cp\u003eThis cover ships with a four-foot overlap beyond the listed pool size so you can more easily drape and secure it over varying top rails. A winch and cable are included to thread through perimeter grommets, tightening the cover around the pool; Pool Mate recommends considering the next size up if your pool has very large top rails to prevent stress on the fabric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 ft overlap included — cover dimensions are 22 x 37 ft including overlap.\u003c\/li\u003e\n  \u003cli\u003eWinch and cable supplied for perimeter securing through grommets.\u003c\/li\u003e\n  \u003cli\u003eSuggested installation method: cable under deck where possible and water weights for decked pools.\u003c\/li\u003e\n  \u003cli\u003eNot intended for in-season debris protection — designed for winter\/off-season use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the material and what warranty does it carry?\u003c\/h3\u003e\n\u003cp\u003eThe Classic Dura-Guard is woven with an 8 x 8 scrim and is 18% heavier than the industry standard, giving it extra tear resistance and resistance to wind stress. Pool Mate backs this cover with a 10-year warranty that covers manufacturing defects, reflecting more than 25 years of pool-cover design experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.36 oz\/yd² (80 g\/m²) polyethylene material for consistent strength.\u003c\/li\u003e\n  \u003cli\u003e8 x 8 scrim weave improves tear resistance and longevity.\u003c\/li\u003e\n  \u003cli\u003eConstructed 18% heavier than typical covers for added durability.\u003c\/li\u003e\n  \u003cli\u003e10-year warranty from Pool Mate for manufacturer defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories or installation tips improve performance?\u003c\/h3\u003e\n\u003cp\u003eUse the included winch and cable for primary securing and pair the cover with water weights or cover clips where decks or wind are a concern. Pool Mate recommends ice equalizer pillows (sold separately) to minimize ice pressure on the fabric and advises floating the cover loosely so expansion and contraction don't stress seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded winch\/cable secures cover through reinforced grommets.\u003c\/li\u003e\n  \u003cli\u003eUse vinyl water weights on decks or cover wrap and clips for additional hold.\u003c\/li\u003e\n  \u003cli\u003eConsider ice equalizer pillows (sold separately) to manage ice load.\u003c\/li\u003e\n  \u003cli\u003eChoose the next size up if your pool has oversized top rails for a stress-free fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this cover is for: Pool owners with a traditional oval above-ground pool and standard top rail who need a rugged, easy-to-install winter solution. It’s aimed at buyers seeking a solid, non-permeable cover that resists wind and ice stress, includes installation hardware, and is backed by a long warranty for seasonal peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this cover be used during the swimming season?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This solid winter cover is intended for off-season use only and is not designed as an in-season debris cover.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include hardware to secure the cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A winch and cable are included to secure the cover through perimeter grommets; additional weights or clips sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pool Mate","offers":[{"title":"Default Title","offer_id":54210303590584,"sku":"B01H8ET2IQ","price":213.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pool-mate-oval-cover-front-view.jpg?v=1790678995"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/pool-mate-oval-cover-front-view.jpg?v=1790679854","url":"https:\/\/canadianlawn.ca\/collections\/pool-mate.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}