{"title":"Pentair","description":"\u003cp\u003eBrowse 51 Pentair products at Canadian Lawn, including pool \u0026amp; spa replacement parts, pool filters \u0026amp; cartridges and pool \u0026amp; spa water balance. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"pentair-fns-plus-bulkhead-o-ring-59000600-replacement-seal-2-1-4in-for-d-e-pool-spa-filters","title":"Pentair FNS Plus Bulkhead O-Ring 59000600 Replacement Seal 2-1\/4in for D.E. Pool \u0026 Spa Filters","description":"\u003cstrong\u003eReplacement bulkhead O-ring engineered to restore a watertight seal on Pentair FNS Plus D.E. pool and spa filters.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Pentair FNS Plus D.E. filter is leaking at the bulkhead or showing signs of wear, the 59000600 O-ring provides an exact-fit replacement to stop leaks and maintain proper filter performance. Made to Pentair specifications, this small but critical rubber gasket measures 2-1\/4 inches long by 1\/4 inch high by 2-1\/4 inches wide and is manufactured in Vietnam. It’s a direct swap for worn or damaged bulkhead seals on compatible FNS Plus models, restoring pressure integrity without the need for adapter parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this O-ring fits my FNS Plus filter?\u003c\/h3\u003e\n\u003cp\u003eMatch the part number and the physical dimensions with your existing seal. The 59000600 O-ring is sized specifically for Pentair FNS Plus D.E. pool and spa filters and replaces the factory bulkhead gasket where indicated in Pentair parts lists.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePart number: Pentair 59000600\u003c\/li\u003e\n  \u003cli\u003eDimensions: 2-1\/4\" length × 1\/4\" height × 2-1\/4\" width\u003c\/li\u003e\n  \u003cli\u003eDesigned for Pentair FNS Plus D.E. filter bulkhead connections\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement — no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the signs I should replace the bulkhead O-ring?\u003c\/h3\u003e\n\u003cp\u003eReplace the O-ring if you observe water weeping around the filter bulkhead, loss of normal system pressure, or visible cracking and flattening of the gasket. Regular inspection during seasonal maintenance helps catch deterioration before it affects filtration performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible leaks or moisture at bulkhead joints\u003c\/li\u003e\n  \u003cli\u003eCollapsed, flattened, or cracked rubber surface\u003c\/li\u003e\n  \u003cli\u003eRepeated pressure loss or frequent topping-off of water\u003c\/li\u003e\n  \u003cli\u003eRoutine replacement during multi-year maintenance cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the replacement O-ring?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: drain and depressurize the filter, remove the bulkhead hardware, swap the old O-ring for the new 59000600 gasket, and reassemble. Lubricate the O-ring with a compatible silicone-based pool-safe grease to ensure proper seating and help prevent future sealing issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStep 1: Turn off pump and relieve pressure\u003c\/li\u003e\n  \u003cli\u003eStep 2: Remove bulkhead fittings and extracted old O-ring\u003c\/li\u003e\n  \u003cli\u003eStep 3: Apply pool-safe lubricant and seat the new Pentair O-ring\u003c\/li\u003e\n  \u003cli\u003eStep 4: Reassemble and test for leaks under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this O-ring affect filter performance or safety?\u003c\/h3\u003e\n\u003cp\u003eUsing the correct Pentair replacement O-ring preserves the filter’s intended sealing properties, which helps maintain system pressure and filtration efficiency. It’s a passive sealing component — when installed correctly it supports safe, reliable operation but does not alter filter function or chemistry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores manufacturer-specified sealing dimensions\u003c\/li\u003e\n  \u003cli\u003eHelps maintain stable system pressure and flow\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard pool maintenance routines\u003c\/li\u003e\n  \u003cli\u003eNon-electrical, simple mechanical replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, service technicians, and maintenance professionals who operate Pentair FNS Plus D.E. filters and need a precise replacement bulkhead seal. If you’re troubleshooting leaks, performing preventive maintenance, or restoring an older filter to factory condition, the Pentair 59000600 O-ring delivers the correct size and material compatibility to get the bulkhead sealed and the system running reliably again.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this O-ring fit all Pentair FNS Plus models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 59000600 is made to fit Pentair FNS Plus D.E. filter bulkheads that list this part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse the old O-ring if it looks okay?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It's best to replace the O-ring during service; reused seals can wear and cause future leaks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54192837034168,"sku":"B004W4NGSS","price":38.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-59000600-front-view.jpg?v=1790552238"},{"product_id":"pentair-chlorine-neutralizer-solution-no-4-1-2-oz-reagent-to-restore-accurate-colorimetric-test-readings","title":"Pentair chlorine neutralizer solution No.4 — 1\/2‑oz reagent to restore accurate colorimetric test readings","description":"\u003cp\u003e\u003cstrong\u003ePentair R161204 No.4 is a concentrated chlorine neutralizer reagent supplied in a 1\/2-ounce bottle to restore accurate free chlorine readings in compatible test kits.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen residual chlorine skews colorimetric tests, this neutralizing solution lets you eliminate free chlorine interference so the test measures the intended parameter. The R161204 reagent is formulated for Pentair test instruments and comes in a small, precisely measured bottle for single-reagent replacement, fitting into several legacy and current Pentair models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Pentair test kits and analyzers use this chlorine neutralizer?\u003c\/h3\u003e\n\u003cp\u003eThis reagent is compatible with a range of Pentair colorimetric test systems that require a chlorine neutralizer labeled as Solution No. 4 or Solution I replacement. Verify your model before ordering to ensure correct chemistry and fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with Pentair No. 78+ and No. 7000 series test kits\u003c\/li\u003e\n  \u003cli\u003eCompatible with No. 1300, PRO 11, No. 761 devices\u003c\/li\u003e\n  \u003cli\u003eAlso fits No. 782 and No. 783 models requiring Solution No. 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much reagent is provided and how is it stored?\u003c\/h3\u003e\n\u003cp\u003eThe bottle contains a measured 1\/2-ounce (approximate) of neutralizer solution packaged to replace a single solution bottle in your kit. Store it sealed in a cool, dark place away from direct sunlight and extreme temperatures to preserve reagent stability until use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupplied as one 1\/2-ounce reagent bottle per pack\u003c\/li\u003e\n  \u003cli\u003eKeep cap tightly closed between uses to prevent evaporation\u003c\/li\u003e\n  \u003cli\u003eStore at ambient indoor temperatures, away from heat sources and sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this reagent affect test accuracy and handling?\u003c\/h3\u003e\n\u003cp\u003eAdding the neutralizer removes free chlorine that would otherwise react in colorimetric assays, letting you measure secondary analytes without chlorine interference. Handle the chemical carefully and follow your test kit instructions for dosing and disposal to maintain safety and measurement fidelity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNeutralizes free chlorine to prevent false-positive color shifts\u003c\/li\u003e\n  \u003cli\u003eSmall bottle volume is calibrated for single-reagent replacement use\u003c\/li\u003e\n  \u003cli\u003eFollow kit directions for correct drop count and mixing procedure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and packaging details?\u003c\/h3\u003e\n\u003cp\u003eThe packaged reagent ships compactly; the product listing describes outer measurements useful for storage or inventory planning. It arrives as a single reagent bottle inside protective packaging designed to prevent leakage during transport.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains 1 reagent bottle per pack for easy inventory control\u003c\/li\u003e\n  \u003cli\u003eOuter package dimensions approximately 4\" length × 10.5\" height × 7\" width\u003c\/li\u003e\n  \u003cli\u003eLightweight, compact packaging for shelving or kit replenishment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pentair R161204 No.4 chlorine neutralizer suits pool and spa service technicians, water-quality professionals, and facility managers who use Pentair colorimetric test kits and need a reliable replacement reagent to remove free chlorine interference. It’s also useful for homeowners maintaining their own Pentair testing equipment who require the exact chemistry and bottle size specified by the manufacturer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this reagent the same as Solution I?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Pentair R161204 replaces Solution I (No. 4) used to neutralize free chlorine in compatible Pentair test kits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I store the bottle between uses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Keep the cap tightly closed and store in a cool, dark place away from heat and sunlight to preserve reagent stability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54192887398584,"sku":"B004VU8VHY","price":39.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-r161204-front-bottle.jpg?v=1790553784"},{"product_id":"pentair-sta-rite-1-4-mpt-drain-plug-u178-920pz-replacement-with-molded-o-ring-leak-resistant-seal","title":"Pentair Sta-Rite 1\/4\" MPT Drain Plug U178-920PZ — Replacement with Molded O-Ring, Leak-Resistant Seal","description":"\u003cp\u003e\u003cstrong\u003ePentair Sta-Rite U178-920PZ is a 1\/4\" MPT drain plug with an integrated O-ring designed to seal and drain pool and spa equipment safely and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact replacement drain plug fits many Pentair Sta-Rite filter and pump housings that require a 1\/4\" male pipe thread (MPT). Built to the manufacturer specification, the plug includes a molded elastomer O-ring to prevent leaks and simplifies service tasks such as winterizing, maintenance, and water removal. It’s a small, low-cost part that keeps your equipment sealed when in use and easy to open when you need to drain.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does the U178-920PZ drain plug replace or fit?\u003c\/h3\u003e\n\u003cp\u003eThe U178-920PZ is made to match Pentair Sta-Rite assemblies that specify a 1\/4\" MPT drain plug. Use it wherever the original drain plug is missing, cracked, or leaking to restore a proper seal. It’s a direct-fit component meant for quick swap-outs without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact part number: U178-920PZ\u003c\/li\u003e\n  \u003cli\u003eThread type: 1\/4\" male pipe thread (MPT)\u003c\/li\u003e\n  \u003cli\u003eCommonly used in Sta-Rite pool and spa pumps and filter housings\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for worn or damaged factory drain plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the O-ring help performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe included O-ring provides a leak-resistant seal between the plug and housing, reducing the chance of water seepage around the threads. It helps maintain correct pressure and prevents corrosion caused by slow leaks. During servicing, the O-ring also makes reinstalling the plug easier and more consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded elastomer O-ring for a reliable water-tight seal\u003c\/li\u003e\n  \u003cli\u003eReduces drip leaks that can cause equipment damage\u003c\/li\u003e\n  \u003cli\u003eEasy to remove and replace during routine maintenance\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical pool chemicals and temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install or remove this 1\/4\" MPT drain plug?\u003c\/h3\u003e\n\u003cp\u003eInstall by hand-threading the plug into the drain port until snug, then finish with a suitable tool if needed—avoid over-tightening to protect the O-ring and threads. To remove, loosen by turning counterclockwise; if stiff, apply penetrating-safe lubricant or gently tap the housing to break the seal. Always drain pressure and water per manufacturer instructions before removing the plug.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-start threads, then tighten until secure (do not over-torque)\u003c\/li\u003e\n  \u003cli\u003eRemove with counterclockwise turn; use care to avoid cross-threading\u003c\/li\u003e\n  \u003cli\u003eInspect or replace O-ring if cracked or flattened\u003c\/li\u003e\n  \u003cli\u003eFollow equipment safety steps before draining\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, service technicians, and maintenance professionals needing a reliable, OEM-compatible drain plug for Pentair Sta-Rite pumps and filters. If you’re replacing a worn plug, preparing equipment for winter storage, or performing routine service, this inexpensive OEM part keeps housings sealed and serviceable without modifying the system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the U178-920PZ compatible with other brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed for Pentair Sta-Rite equipment with a 1\/4\" MPT port; compatibility with other brands depends on matching thread size and seat design.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse the O-ring when reinstalling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can reuse the O-ring if it’s intact and flexible; replace it if it’s cracked, flattened, or chemically degraded.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54193065558200,"sku":"B099F64WCV","price":39.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-sta-rite-drain-plug-front-view.jpg?v=1790557863"},{"product_id":"pentair-pool-tube-thermometer-with-abs-case-and-3-foot-cord-floatable-durable","title":"Pentair Pool Tube Thermometer with ABS Case and 3-Foot Cord — Floatable, Durable","description":"\u003cstrong\u003ePentair R141036 is a durable tube-style pool and spa thermometer with an ABS storage case and a 3-foot cord for easy, accurate temperature readings.\u003c\/strong\u003e\n\n\u003cp\u003eKeeping water at the right temperature improves comfort and helps you monitor heating system performance. The Pentair R141036 tube thermometer is designed for pools and spas, offering a straightforward, floatable design and a protective ABS case for storage. Its 3-foot cord gives enough reach to hang or tether the instrument without submerging electronic components, and the compact size makes it simple to move between pools, spas, or storage.\u003c\/p\u003e\n\n\u003ch3\u003eHow accurate and reliable is the Pentair R141036 for pool readings?\u003c\/h3\u003e\n\u003cp\u003eThis tube thermometer provides consistent temperature readings suitable for everyday pool and spa use. While not a laboratory instrument, its design targets practical accuracy to help you assess comfort and check heating performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTube-style sensor for stable water contact\u003c\/li\u003e\n  \u003cli\u003eDesigned for recreational pool and spa temperature ranges\u003c\/li\u003e\n  \u003cli\u003eDurable construction helps maintain consistent readings over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the ABS case and 3-foot cord improve handling?\u003c\/h3\u003e\n\u003cp\u003eThe included ABS case protects the thermometer when not in use and prevents accidental damage. The 3-foot cord gives flexible placement options—hang it from pool edges, anchors, or equipment while keeping the display accessible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS case resists cracking and UV exposure during storage\u003c\/li\u003e\n  \u003cli\u003e3-foot cord provides reach without tangling in pool equipment\u003c\/li\u003e\n  \u003cli\u003eEasy to mount, hang, or tether for consistent positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and pack details?\u003c\/h3\u003e\n\u003cp\u003eThe unit is compact and easy to store; dimensions support convenient handling and portability. It ships in bubble packs, making it suitable for retail display or bulk replacement for multiple pools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasured size: 8-1\/4 inches length × 9-3\/4 inches height × 8-1\/4 inches width\u003c\/li\u003e\n  \u003cli\u003eIncludes one thermometer in an ABS case with 3-foot cord\u003c\/li\u003e\n  \u003cli\u003eSold in bubble packs of 24 for commercial or multi-site needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and maintain this thermometer for best results?\u003c\/h3\u003e\n\u003cp\u003eSimple routine care keeps readings reliable: rinse after use, store in its case out of direct sun, and check the cord and housing for wear. Avoid dropping or exposing it to freezing conditions to prolong life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse with fresh water after chlorine exposure and dry before storing\u003c\/li\u003e\n  \u003cli\u003eStore inside the ABS case away from prolonged sunlight\u003c\/li\u003e\n  \u003cli\u003eInspect cord and tube for cracks or fraying periodically\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, facility managers, and service professionals who want a low-maintenance, easy-to-read thermometer for routine temperature checks. The Pentair R141036 is a practical choice for backyard pools, hot tubs, hotels, and community centers where dependable, portable temperature monitoring is needed without complex setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Pentair R141036 in the water continuously?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is designed for regular pool use, but storing it in its ABS case when not needed extends its life; avoid constant exposure to sun and freezing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 3-foot cord long enough to hang from a pool edge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—3 feet provides enough reach to hang or tether from typical pool edges and equipment while keeping the unit accessible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54193126244536,"sku":"B000PSDWIE","price":50.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-front-view-thermometer.jpg?v=1790558963"},{"product_id":"pentair-r172061-replacement-check-valve-elbow-for-rainbow-300-302-oem-fit-one-way-flow","title":"Pentair R172061 Replacement Check Valve \u0026 Elbow for Rainbow 300\/302 — OEM fit, one-way flow","description":"\u003cstrong\u003eA compact replacement check valve and elbow designed to fit Pentair Rainbow automatic chlorine and bromine feeder models 300, 302, 300-19, and 300-29.\u003c\/strong\u003e\n\n\u003cp\u003eThis OEM Pentair R172061 part restores one-way chemical flow and the correct plumbing angle inside Rainbow automatic feeders so your pool or spa feeder dispenses sanitizers reliably. Manufactured for compatibility and easy installation, the combination unit replaces worn or damaged fittings that can allow backflow, leaks, or improper chemical delivery.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this part restore proper chemical flow?\u003c\/h3\u003e\n\u003cp\u003eThe R172061 merges a check valve with an elbow to keep sanitizer moving only from the feeder into the pool plumbing while maintaining the feeder's required outlet angle. Replacing a faulty valve prevents return flow that could contaminate the feeder or cause dosing issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in one-way valve prevents backflow into the feeder body.\u003c\/li\u003e\n  \u003cli\u003eElbow retains original outlet orientation for correct installation.\u003c\/li\u003e\n  \u003cli\u003eDirect fit for Pentair Rainbow 300, 302, 300-19, 300-29 models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation straightforward for DIYers?\u003c\/h3\u003e\n\u003cp\u003eThe combination unit is small and shaped to match the original factory part, so swapping it in requires minimal disassembly of the feeder. Typical installation needs only basic hand tools and a short reassembly time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM form factor ensures alignment with feeder ports and fittings.\u003c\/li\u003e\n  \u003cli\u003eSimple remove-and-replace process—no special adapters required.\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions and light weight simplify handling during service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part work with my specific Rainbow feeder model?\u003c\/h3\u003e\n\u003cp\u003eYes. The R172061 is produced to fit Pentair Rainbow feeder models 300, 302, 300-19 and 300-29. Confirm your feeder model number before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with listed Rainbow model numbers as an OEM replacement.\u003c\/li\u003e\n  \u003cli\u003eIf your model differs, check Pentair part cross-reference or manual.\u003c\/li\u003e\n  \u003cli\u003eCountry of origin: Taiwan, Province of China; model number stamped R172061.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool and spa owners, maintenance technicians, and service shops replacing worn or leaking components in Pentair Rainbow automatic chlorine\/bromine feeders. Choose the R172061 when you need an exact-fit check valve and elbow assembly to restore proper one-way chemical flow and the factory outlet angle without modifying plumbing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the R172061 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s a direct-fit OEM part for Rainbow 300\/302 series; basic tools and feeder disassembly are typically all that’s needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with all Pentair Rainbow feeders?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits models 300, 302, 300-19 and 300-29. Verify your model number before purchasing for full compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54193210556600,"sku":"B0039RUI4E","price":45.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-r172061-front-view.jpg?v=1790559774"},{"product_id":"pentair-vac-mate-basket-gasket-7-1-4-id-x-8-1-4-od-replacement-seal-for-vac-mate-skimmers-restores-suction","title":"Pentair Vac-Mate Basket Gasket 7-1\/4\" ID x 8-1\/4\" OD — Replacement seal for Vac-Mate skimmers, restores suction","description":"\u003cp\u003e\u003cstrong\u003eThis is the Pentair Vac-Mate basket gasket sized 7-1\/4\" inside diameter and 8-1\/4\" outside diameter, made to seal Pentair multifunction vacuum skimmers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your Pentair Vac-Mate vacuum skimmer working effectively by replacing worn seals with the correct gasket. This large-diameter gasket fits the Vac-Mate basket assembly to maintain suction, reduce leaks, and help the skimmer capture debris as intended. It’s a single replacement part engineered to match Pentair specifications so you don’t have to modify housings or adapters.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this gasket restore Vac-Mate skimmer performance?\u003c\/h3\u003e\n\u003cp\u003eOver time gaskets compress, crack, or lose elasticity, letting air bypass the skimmer and reducing vacuum power. Installing a fresh Pentair Vac-Mate gasket restores a tight seal between the basket and skimmer body so flow is concentrated through the filtration path again. That improved seal helps the vacuum maintain consistent suction and debris capture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for Pentair Vac-Mate basket assemblies.\u003c\/li\u003e\n  \u003cli\u003eRestores original sealing tolerance to prevent air leaks.\u003c\/li\u003e\n  \u003cli\u003eHelps ensure steady suction and efficient debris collection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThis gasket measures 7-1\/4\" internal diameter and 8-1\/4\" external diameter, matching the Vac-Mate basket interface. Correct ID\/OD sizing is critical to ensure the gasket seats properly without gaps or overhangs that could cause premature wear or reduced sealing. Using the specified size avoids misalignment that can create leakage paths.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7-1\/4\" ID for proper seating around the basket lip.\u003c\/li\u003e\n  \u003cli\u003e8-1\/4\" OD to match the skimmer housing recess.\u003c\/li\u003e\n  \u003cli\u003eManufactured to Pentair-compatible tolerances for reliable fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install or replace this Vac-Mate gasket?\u003c\/h3\u003e\n\u003cp\u003eReplacement is straightforward: remove the basket, take out the old gasket, clean the seating surface, and press the new gasket into place around the basket rim. No special tools are usually required, though a soft cloth and mild cleaner help remove residue before seating the new seal. Confirm the gasket sits flush before reassembling to avoid pinching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off pump and relieve system pressure first.\u003c\/li\u003e\n  \u003cli\u003eClean mating surfaces of debris and residue for full contact.\u003c\/li\u003e\n  \u003cli\u003ePress the gasket evenly around the basket lip until it sits flush.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and maintenance will extend gasket life?\u003c\/h3\u003e\n\u003cp\u003eGaskets for pool equipment are typically molded from durable, weather-resistant elastomers designed to resist pool chemicals and UV exposure. Rinse periodically, avoid harsh solvents, and inspect annually for flattening or cracks. Replacing the gasket at the first sign of wear prevents harder-to-fix problems with the skimmer or vacuum system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from pool-grade elastomer resistant to chemicals and sun.\u003c\/li\u003e\n  \u003cli\u003eRinse and inspect regularly to spot wear early.\u003c\/li\u003e\n  \u003cli\u003eStore spare gaskets flat and out of direct sunlight to preserve shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement gasket is aimed at pool owners, maintenance professionals, and service technicians who use Pentair Vac-Mate multifunction vacuum skimmers and need an exact-fit seal to restore reliable suction. If you operate a Pentair Vac-Mate system and notice reduced vacuum performance or visible gasket damage, this part provides the specified dimensions and materials to return the basket assembly to proper working order.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this gasket fit any Vac-Mate model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this gasket is sized for Vac-Mate basket assemblies with 7-1\/4\" ID and 8-1\/4\" OD; confirm your basket matches those dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should the gasket be replaced?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inspect annually; replace sooner if you see cracks, flattening, or reduced vacuum performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54193397727416,"sku":"B004VTG49W","price":46.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-vac-mate-gasket-front-view.jpg?v=1790561781"},{"product_id":"pentair-2-inch-diverter-gasket-for-hiflow-clamp-on-multiport-valves-271148-restores-seal-smooth-operation","title":"Pentair 2-Inch Diverter Gasket for HiFlow \u0026 Clamp-On Multiport Valves — 271148, Restores Seal \u0026 Smooth Operation","description":"\u003cp\u003e\u003cstrong\u003ePentair 271148 is a 2-inch diverter gasket designed to replace worn seals in Pentair HiFlow top and side mount multiport valves and clamp-on top mount models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool or spa multiport valve is leaking, sticking between positions, or showing reduced flow, the diverter gasket is a common wear item that restores proper sealing and operation. This genuine Pentair replacement part fits 2-inch diverter assemblies found in HiFlow and clamp-on style multiport valves, letting you avoid a full valve replacement while returning reliable control to filtration, backwash, rinse, and closed functions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this gasket stop leaks and restore valve function?\u003c\/h3\u003e\n\u003cp\u003eYes — a degraded or flattened diverter gasket is often the cause of internal leaks between valve ports and difficulty shifting positions. Replacing the gasket re-establishes the internal seal surfaces so water follows the intended path and the handle moves smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Pentair HiFlow and top-mount clamp-on multiport valves\u003c\/li\u003e\n  \u003cli\u003eCorrect 2-inch diameter to match factory diverter bores\u003c\/li\u003e\n  \u003cli\u003eRestores sealing between filtration, backwash, rinse, and waste ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Pentair 271148 gasket?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable working with pool plumbing: depressurize the system, remove the valve clamp or screws, extract the old gasket, and seat the new gasket evenly in the diverter recess. Light lubrication with a pool-safe silicone grease can help the new gasket seat and prevent rolling, but avoid petroleum-based products.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShut off pump and relieve system pressure before starting\u003c\/li\u003e\n  \u003cli\u003eRemove valve handle, clamp or cover to access the diverter chamber\u003c\/li\u003e\n  \u003cli\u003eClean the recess, inspect for grooves, and fit the new 2\" gasket evenly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this part compatible with my Pentair valve model?\u003c\/h3\u003e\n\u003cp\u003eThis gasket is made to fit Pentair HiFlow top- and side-mount multiport valves and many Pentair clamp-on top-mount multiport valves that use a 2-inch diverter seal. Verify compatibility by checking your valve style and existing gasket diameter or consult Pentair documentation for model cross-references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Pentair HiFlow top-mount and side-mount multiport valves\u003c\/li\u003e\n  \u003cli\u003eAlso fits Pentair clamp-on top-mount multiport valve models using a 2\" seal\u003c\/li\u003e\n  \u003cli\u003eMeasure the old gasket or compare valve part numbers when unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance tips extend the life of the new gasket?\u003c\/h3\u003e\n\u003cp\u003eRoutine inspection and basic valve care keep the diverter gasket performing longer. Regularly operate the valve through all positions, keep the interior surfaces clean of grit, and avoid chemical exposure beyond normal pool sanitizers to reduce premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRinse grit and debris from the valve body during service intervals\u003c\/li\u003e\n  \u003cli\u003eUse pool-safe silicone grease sparingly on the gasket seating area\u003c\/li\u003e\n  \u003cli\u003eInspect for grooves or valve body damage that can abrade the gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair 271148 2-inch diverter gasket is aimed at pool service technicians, DIY pool owners, and maintenance professionals who want a cost-effective way to repair leaking or hard-to-shift Pentair multiport valves without replacing the entire valve assembly. If your valve is compatible and showing sealing or operation problems, this authentic Pentair replacement gasket restores reliable performance with minimal downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 271148 gasket fit my Pentair multiport valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Pentair HiFlow top and side mount multiport valves and many top-mount clamp-on models using a 2\" diverter seal; verify by measuring your current gasket.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the gasket myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Turn off the pump, relieve pressure, remove the valve cover, replace the 2\" gasket, and reassemble; use pool-safe silicone grease if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54194236719288,"sku":"B004VTGUH8","price":48.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-diverter-gasket-front-view.jpg?v=1790572018"},{"product_id":"pentair-u-3-skimmer-weir-assembly-08650-0022-oem-replacement-made-in-usa-for-swimquip-sta-rite-pools","title":"Pentair U-3 Skimmer Weir Assembly 08650-0022 — OEM Replacement, Made in USA for SwimQuip\/Sta‑Rite Pools","description":"\u003cp\u003e\u003cstrong\u003ePentair Sta‑Rite 08650‑0022 is the OEM U‑3 skimmer weir assembly that restores proper surface skimming by replacing the hinged weir gate on compatible vinyl‑liner pool skimmers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool skimmer isn’t catching surface debris like it used to, replacing the weir can make a big difference. This genuine Pentair\/Sta‑Rite part (08650‑0022) is built in the United States to the same specifications as the original U‑3 weir gate and ships in a lightweight, easy‑to‑handle package. It fits SwimQuip U‑3 style vinyl‑liner skimmers and reestablishes the intended water flow so the skimmer can collect leaves, insects and floatable debris more effectively.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this weir assembly improve skimming performance?\u003c\/h3\u003e\n\u003cp\u003eThe hinged weir gate movement lets the skimmer respond to surface waves, maintaining a consistent curtain of water into the throat. That steady flow directs floating debris into the skimmer basket instead of letting it pass by the opening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHinged gate design preserves optimal surface flow dynamics.\u003c\/li\u003e\n  \u003cli\u003eReplaces worn or warped original weir for reliable operation.\u003c\/li\u003e\n  \u003cli\u003eRestores correct skimmer suction balance for better debris capture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my pool skimmer?\u003c\/h3\u003e\n\u003cp\u003eThis component is specifically manufactured as part number 08650‑0022 for U‑3 vinyl‑liner skimmers. It is intended for SwimQuip U‑3 \/ Sta‑Rite U‑3 systems and is engineered to match original OEM dimensions and mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eModel number 08650‑0022 ensures compatibility with U‑3 skimmers.\u003c\/li\u003e\n  \u003cli\u003eOEM fit minimizes modification or extra fasteners during installation.\u003c\/li\u003e\n  \u003cli\u003eCheck your skimmer housing model before ordering to confirm fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eThe weir assembly arrives light enough for one person to handle and installs with basic hand tools. Routine checks and seasonal replacement help prevent debris bypass and maintain cleaner circulation without complicated servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight packaging (about 1 pound) for single‑person handling.\u003c\/li\u003e\n  \u003cli\u003eSimple hinge replacement process—no specialized equipment needed.\u003c\/li\u003e\n  \u003cli\u003eRegular inspection recommended as part of preventative maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and origin details?\u003c\/h3\u003e\n\u003cp\u003eMade in the United States to Pentair’s Sta‑Rite specifications, this weir assembly is designed as a genuine OEM replacement. The materials and hinge mechanics are chosen to match original performance and longevity standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDomestic manufacturing with attention to OEM tolerances.\u003c\/li\u003e\n  \u003cli\u003eDurable hinge construction to withstand seasonal cycles and exposure.\u003c\/li\u003e\n  \u003cli\u003eDesigned to restore original skimmer performance and efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement weir is ideal for pool owners, service technicians and maintenance pros managing vinyl‑liner pools with Sta‑Rite\/SwimQuip U‑3 skimmers. If your skimmer gate is cracked, warped, stuck, or simply not keeping debris in the basket, swapping in this genuine Pentair part returns predictable surface skimming and helps keep your circulation system working as intended.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is 08650‑0022 compatible with all Sta‑Rite skimmers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Part 08650‑0022 is designed for U‑3 vinyl‑liner skimmers (SwimQuip U‑3). Verify your skimmer model before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the weir myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hinged weir typically installs with basic tools and one person; follow manufacturer guidance for safe installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54195127615672,"sku":"B0037F37VO","price":60.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-sta-rite-u3-weir-front-view.jpg?v=1790582008"},{"product_id":"pentair-replacement-pressure-gauge-for-pool-spa-filters-190058-oem-fit-chemical-resistant","title":"Pentair Replacement Pressure Gauge for Pool \u0026 Spa Filters — 190058, OEM-fit, Chemical‑Resistant","description":"\u003cp\u003e\u003cstrong\u003ePentair 190058 is a direct-fit replacement pressure gauge designed for Pentair pool and spa filter valves and cartridge\/DE filter systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement gauge restores accurate pressure readings on Pentair multiport valves and several cartridge and diatomaceous earth (D.E.) filter housings, helping you know when to backwash or clean cartridges. Made to match Pentair mounting and pressure range specifications, the 190058 is a compact, durable gauge that fits many Clean \u0026amp; Clear, EasyClean, Triton, Predator, Warrior and STA-RITE models. Installing it returns reliable monitoring to your filtration system without replacing the entire valve or filter head.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Pentair systems does this gauge fit?\u003c\/h3\u003e\n\u003cp\u003eThe 190058 is compatible with a wide range of Pentair filters and valves commonly used in residential pools and spas. It works with Clean \u0026amp; Clear, Clean \u0026amp; Clear Plus, EasyClean, Triton C-3, Predator and Warrior cartridge filters, plus several FNS and FNSP DE models.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Clean \u0026amp; Clear and Clean \u0026amp; Clear Plus cartridge filters\u003c\/li\u003e\n\u003cli\u003eCompatible with EasyClean, Triton C-3, Predator and Warrior systems\u003c\/li\u003e\n\u003cli\u003eWorks on FNS\/FNSP24, FNSP36, FNSP48, FNSP60 DE filter models\u003c\/li\u003e\n\u003cli\u003eAlso fits Pentair\/Sta-Rite 1-1\/2-inch multiport valve assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate and durable is the replacement gauge?\u003c\/h3\u003e\n\u003cp\u003eThis Pentair gauge is built to provide consistent pressure readings under typical pool and spa conditions. It matches Pentair's form factor so the needle, face, and connection align correctly for reliable monitoring; the compact housing resists pool chemicals and outdoor exposure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-style construction for consistent readings\u003c\/li\u003e\n\u003cli\u003eChemical-resistant housing suitable for pool environments\u003c\/li\u003e\n\u003cli\u003eCompact dimensions: approximately 3\" long x 1-3\/8\" high x 2-1\/2\" wide\u003c\/li\u003e\n\u003cli\u003eStandard threaded connection fits targeted Pentair valve ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install or replace on my filter or valve?\u003c\/h3\u003e\n\u003cp\u003eReplacing the gauge is a straightforward task for most homeowners or pool technicians: depressurize the system, remove the old gauge, and thread in the 190058 until snug. No special tools or calibration are required, though use of a wrench with a protective pad and thread sealant is recommended to prevent leaks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShut pump off and relieve system pressure before starting\u003c\/li\u003e\n\u003cli\u003eUnscrew the existing gauge from the multiport or filter head\u003c\/li\u003e\n\u003cli\u003eApply appropriate thread sealant and hand-tighten, then snug with wrench\u003c\/li\u003e\n\u003cli\u003eRestore system pressure and check for proper reading and leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace my pressure gauge?\u003c\/h3\u003e\n\u003cp\u003eReplace the gauge when the needle sticks, reads zero while the system runs, shows erratic movement, or the glass is cracked\/clouded. A reliable gauge is vital to know when filters need cleaning or backwashing; a failing gauge can mask pressure spikes and reduce filtration performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplace if needle is immobile or fluctuates irregularly\u003c\/li\u003e\n\u003cli\u003eSwap out when the gauge face is cracked or fogged\u003c\/li\u003e\n\u003cli\u003eInstall new gauge after valve service or filter head repairs\u003c\/li\u003e\n\u003cli\u003eUse OEM-fit replacements like 190058 for proper fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Pentair 190058 pressure gauge is intended for pool owners, spa operators, and service professionals who use Pentair cartridge or D.E. filtration systems and need an exact-fit, dependable pressure indicator. It suits anyone maintaining Clean \u0026amp; Clear, EasyClean, Triton, Predator, Warrior, or compatible FNS\/FNSP and STA-RITE multiport valves who wants a simple, OEM-compatible replacement without modifying plumbing or valve components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this gauge fit my Pentair Clean \u0026amp; Clear filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 190058 is compatible with Pentair Clean \u0026amp; Clear cartridge filters and fits the matching valve port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the replacement gauge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only basic tools: relieve pressure, remove old gauge, use thread sealant and a wrench to snug the new gauge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54195154387128,"sku":"B004W4TQJ6","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-pressure-gauge-front_jpg.jpg?v=1790582224"},{"product_id":"pentair-1-4-inch-npt-control-valve-for-rainbow-automatic-chlorine-bromine-feeders-r172060-made-in-usa-restores-dosing-accuracy","title":"Pentair 1\/4-Inch NPT Control Valve for Rainbow Automatic Chlorine\/Bromine Feeders — R172060, Made in USA, Restores Dosing Accuracy","description":"\u003cstrong\u003eThe Pentair R172060 is a 1\/4-inch NPT control valve engineered to replace the valve in Rainbow automatic chlorine and bromine pool and spa feeders.\u003c\/strong\u003e\n\n\u003cp\u003eThis precision replacement valve restores flow control and dosing accuracy for Rainbow automatic feeders, helping maintain consistent sanitizer delivery in pools and spas. Manufactured to Pentair standards in the United States and sized for a 1\/4-inch NPT connection, the R172060 is compact and straightforward to install when matching the original feeder model and plumbing thread.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this replacement valve restore my automatic feeder's performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or leaking control valve returns reliable flow regulation so the feeder dispenses sanitizer at the intended rate. The R172060 fits the Rainbow feeder design and re-establishes a proper seal and mechanical control that can be lost over time from use or chemical exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect 1\/4-inch NPT fit for compatible Rainbow feeder models\u003c\/li\u003e\n  \u003cli\u003eRestores accurate flow and dosing consistency\u003c\/li\u003e\n  \u003cli\u003eReduces leaks and erratic feeding caused by aged valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering the Pentair R172060 replacement valve?\u003c\/h3\u003e\n\u003cp\u003eConfirm your feeder uses a 1\/4-inch NPT control valve and that the R172060 matches the original part number or physical dimensions. Check the feeder manual or current valve markings to ensure compatibility and avoid purchasing the wrong size or configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the existing valve’s thread size to 1\/4-inch NPT\u003c\/li\u003e\n  \u003cli\u003eVerify the model number on the original valve or feeder parts list\u003c\/li\u003e\n  \u003cli\u003eConfirm valve dimensions fit your feeder’s mounting space (package dimensions given)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for someone familiar with pool equipment: shut off the feeder, relieve pressure, remove the old valve, and thread in the R172060. Basic hand tools are usually sufficient, though thread sealant or plumber’s tape and simple wrenches can help achieve a leak-free connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off feeder and isolate feeder plumbing before servicing\u003c\/li\u003e\n  \u003cli\u003eHand-tighten with wrench and use thread sealant or PTFE tape\u003c\/li\u003e\n  \u003cli\u003eNo electrical work required—mechanical replacement only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and origin details matter for this part?\u003c\/h3\u003e\n\u003cp\u003eThe R172060 is produced in the United States and designed to tolerate pool and spa chemicals typical for chlorine and bromine feeders. Its compact package and materials are chosen for the feeder environment, but routine inspection and replacement as needed will keep your system reliable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade in the United States to Pentair quality specifications\u003c\/li\u003e\n  \u003cli\u003eCompact package dimensions for easy storage and handling\u003c\/li\u003e\n  \u003cli\u003eEngineered for compatibility with Rainbow automatic feeders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, maintenance technicians, and service professionals who operate Rainbow automatic chlorine or bromine feeders and need a direct, reliable replacement control valve. Choose the Pentair R172060 when you require a 1\/4-inch NPT valve that matches OEM fit and restores consistent sanitizer dosing without modifying existing plumbing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the R172060 compatible with all Rainbow feeders?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Rainbow feeders that use a 1\/4-inch NPT control valve; confirm your original part number or thread size before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required—basic wrenches and thread sealant or PTFE tape are usually sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54195396051128,"sku":"B004VTGKH8","price":62.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-r172060-front-valve-view.jpg?v=1790583425"},{"product_id":"pentair-bermuda-skimmer-handle-basket-replacement-516112-oem-fit-tool-free-install-made-in-usa","title":"Pentair Bermuda Skimmer Handle Basket Replacement 516112 — OEM-fit, Tool-Free Install, Made in USA","description":"\u003cp\u003e\u003cstrong\u003ePentair 516112 is a direct-replacement handle basket engineered to fit Bermuda-style gunite and vinyl liner skimmers, restoring secure leaf collection and reliable fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement handle basket is built to match the original geometry and function of Pentair Bermuda skimmers. Sized to the same footprint as the factory component, it provides a straightforward swap-out for worn or damaged baskets so your skimmer can resume capturing debris efficiently. The unit is manufactured in the United States and shipped in compact packaging for easy storage and transport.\u003c\/p\u003e\n\n\u003ch3\u003eWill this basket fit my Bermuda gunite or vinyl liner skimmer?\u003c\/h3\u003e\n\u003cp\u003eYes — the 516112 handle basket is dimensioned specifically for Pentair Bermuda skimmers. Its dimensions follow the original equipment layout to ensure compatibility and proper seating inside the skimmer throat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall dimensions: 5½\" length × 5½\" height × 8½\" width\u003c\/li\u003e\n  \u003cli\u003eDesigned for Bermuda-style gunite and vinyl liner skimmer models\u003c\/li\u003e\n  \u003cli\u003eDrop-in replacement that aligns with existing skimmer ledges and handle mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a simple, tool-free task in most cases — remove the old basket and place the Pentair 516112 into the skimmer throat. Routine maintenance consists of emptying trapped leaves and debris and rinsing the basket to prevent clogging and prolong lifespan.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free removal and replacement in most skimmer setups\u003c\/li\u003e\n  \u003cli\u003eOpen-weave design allows quick rinsing and debris release\u003c\/li\u003e\n  \u003cli\u003eLightweight for simple handling during pool maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe basket is produced to match Pentair’s OEM specifications and is made in the United States. Its construction balances rigidity with lightweight handling so it resists deformation while remaining easy to lift out for cleaning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured in the United States to meet Pentair quality standards\u003c\/li\u003e\n  \u003cli\u003eDurable plastic construction resists cracking under normal use\u003c\/li\u003e\n  \u003cli\u003eDesigned to retain shape and alignment in typical pool conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this come packaged ready to store or ship?\u003c\/h3\u003e\n\u003cp\u003eThe replacement ships in compact packaging sized to protect the part and simplify storage until installation. Package dimensions are small enough to keep spare parts on hand for seasonal maintenance or quick repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage length: 6.5\"\u003c\/li\u003e\n  \u003cli\u003ePackage width: 9.5\"\u003c\/li\u003e\n  \u003cli\u003ePackage height: 6.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool owners and service professionals who maintain Pentair Bermuda-style gunite or vinyl liner pools and need an exact-fit replacement basket. It’s ideal for those replacing cracked, warped, or missing skimmer baskets who want an OEM-matching part made in the United States for straightforward installation and reliable debris collection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this basket fit all Pentair Bermuda skimmer models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is designed for Bermuda-style gunite and vinyl liner skimmers; check your skimmer dimensions against 5½\"×5½\"×8½\" to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the basket easy to clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The open-weave design allows quick rinsing and simple debris removal for routine maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54199636918456,"sku":"B001ELYC3A","price":72.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-516112-front-view-handle-basket.jpg?v=1790597288"},{"product_id":"pentair-intelliflo3-vsf-3hp-mechanical-seal-kit-357872-oem-replacement-seal-gaskets-ceramic-graphite-faces","title":"Pentair Intelliflo3 VSF 3HP Mechanical Seal Kit 357872 — OEM replacement seal, gaskets \u0026 ceramic\/graphite faces","description":"\u003cp\u003e\u003cstrong\u003eReplacement mechanical seal kit designed for Pentair Intelliflo3 VSF and IntelliPro3 VSF 3HP variable speed\/flow pumps (part number 357872).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pentair Intelliflo3 VSF or IntelliPro3 VSF 3HP pump needs a fresh sealing assembly, this OEM 357872 seal kit contains the components to restore a reliable wet-end seal. Using the correct seal parts helps reduce leaks, prevents premature motor damage from water intrusion, and keeps the pump running at designed efficiency. This description explains what the kit includes, when to install it, and how it integrates with your pump model.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in the 357872 seal replacement kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit provides the wetted sealing components required to replace the pump’s mechanical seal assembly. These parts are manufactured to Pentair specifications to match fit and materials used in Intelliflo3 and IntelliPro3 VSF 3HP models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM mechanical seal components sized for 3HP VSF pump shafts\u003c\/li\u003e\n  \u003cli\u003eElastomer gaskets and O-rings designed for pool-service environments\u003c\/li\u003e\n  \u003cli\u003eReplacement ceramic\/graphite seal faces and mating hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know when the seal kit is needed?\u003c\/h3\u003e\n\u003cp\u003eSigns you may need the seal kit include visible water leakage at the motor shaft, reduced pump prime, unusual vibration near the wet end, or frequent motor bearing contamination. Routine inspection during seasonal maintenance can catch seal wear before it causes further damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible drips or pooling near the motor-pump junction\u003c\/li\u003e\n  \u003cli\u003eDifficulty priming or loss of suction performance\u003c\/li\u003e\n  \u003cli\u003eCorrosion or degraded elastomers on inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install the 357872 kit myself, and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eExperienced DIYers comfortable with pump disassembly can install the kit, but follow Pentair service instructions and safety precautions. Basic tools and careful shaft handling are necessary; if unsure, hire a trained technician to avoid misalignment or damage to the new seal faces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon hand tools (wrenches, screwdrivers) and a socket set\u003c\/li\u003e\n  \u003cli\u003eClean lint-free rags and a small amount of compatible lubricating fluid\u003c\/li\u003e\n  \u003cli\u003eService manual guidance or professional help for proper shaft alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing the seal improve pump performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or leaking mechanical seal restores the pump’s ability to maintain proper prime and prevents water from reaching the motor. While it doesn’t change pump horsepower or electronic controls, a good seal reduces leaks and helps the pump operate as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStops water leaking into the motor compartment\u003c\/li\u003e\n  \u003cli\u003ePrevents bearing contamination and premature failure\u003c\/li\u003e\n  \u003cli\u003eHelps maintain designed flow and efficiency by preserving wet-end integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement kit for? This Pentair 357872 seal kit is intended for pool and spa owners, maintenance professionals, and service technicians who maintain Intelliflo3 VSF or IntelliPro3 VSF 3HP variable speed\/flow pumps. If you operate a 3HP VSF model and notice leakage or are performing scheduled wet-end maintenance, this OEM kit supplies the correct parts to restore a reliable seal and extend pump service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is part 357872 compatible with all Intelliflo3 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 357872 is made for Intelliflo3 VSF and IntelliPro3 VSF 3HP models; verify your pump model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include installation instructions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains the seal components; refer to Pentair service manuals or hire a pro for installation guidance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54199663296696,"sku":"B0D5BZBCK8","price":82.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-intelliflo3-vsf-3hp-seal-kit-packaging.jpg?v=1790597562"},{"product_id":"pentair-replacement-weir-gate-assembly-for-bermuda-skimmer-516252-white-8-x-8-5-in-durable-fit","title":"Pentair Replacement Weir Gate Assembly for Bermuda Skimmer 516252 White — 8 x 8.5 in Durable Fit","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair 516252 white weir gate assembly is a ready-to-install replacement weir specifically made to fit Pentair Bermuda gunite and vinyl liner skimmers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your pool skimmer’s flap is worn, cracked, or no longer sealing properly, swapping in this Pentair weir gate restores correct water flow and skimming performance. Molded in white, the assembly matches common skimmer interiors and is sized to integrate with Bermuda-series skimmer housings without modification. The compact part measures 8 inches long, 8-1\/2 inches high, and 5 inches wide, making it an exact-fit replacement for compatible Pentair skimmers and simplifying maintenance tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this weir gate assembly affect surface skimming?\u003c\/h3\u003e\n\u003cp\u003eInstalling a properly functioning weir helps keep floating debris drawn into the skimmer basket rather than circling the pool surface. The Pentair 516252 is molded to promote consistent water draw and to reduce bypass around the skimmer throat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores intended skimmer water flow for improved debris capture\u003c\/li\u003e\n  \u003cli\u003eReduces surface litter and helps maintain clearer water\u003c\/li\u003e\n  \u003cli\u003eDesigned to sit flush in Bermuda skimmer openings for efficient operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this weir gate easy to replace and install?\u003c\/h3\u003e\n\u003cp\u003eYes — the 516252 is a drop-in style weir made to match Pentair Bermuda gunite and vinyl liner skimmer dimensions, so no trimming is normally required. Basic tools and a quick inspection of the skimmer throat are all that’s typically needed before seating the new gate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasures 8\" x 8-1\/2\" x 5\" for accurate fitment\u003c\/li\u003e\n  \u003cli\u003eWhite molded plastic simplifies alignment and visual checks\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires removing the old weir and snapping or fastening the new part into place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part resist pool conditions and wear?\u003c\/h3\u003e\n\u003cp\u003eThe replacement is produced to withstand normal pool chemical exposure and the mechanical motion of opening and closing. While longevity depends on usage and chemical balance, replacing a fatigued or damaged weir prevents leaks and uneven skimming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded material suited for routine pool environments\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated movement without deforming under standard conditions\u003c\/li\u003e\n  \u003cli\u003eWhite finish helps identify wear or damage during inspections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm compatibility with my skimmer?\u003c\/h3\u003e\n\u003cp\u003eCompare the existing weir’s dimensions and the Pentair Bermuda skimmer model to the 516252 specifications before purchasing. If your skimmer is a Bermuda gunite or vinyl liner model from Pentair, this assembly is intended for that family of skimmers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck skimmer model and series stamped on the housing\u003c\/li\u003e\n  \u003cli\u003eMeasure current weir: 8\" length, 8-1\/2\" height, 5\" width\u003c\/li\u003e\n  \u003cli\u003eConsult Pentair documentation or dealer if uncertain about fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners, service professionals, and maintenance technicians who use Pentair Bermuda gunite or vinyl liner skimmers and need a reliable, OEM-style replacement weir gate. This part is ideal when the existing flap shows cracks, warping, or restricted movement and you want a straightforward swap to restore skimmer performance without reworking the skimmer opening.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this weir fit all Pentair skimmers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This 516252 weir is made for Pentair Bermuda gunite and vinyl liner skimmers; check your skimmer model and dimensions to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the replacement without a technician?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, most owners can install it with basic tools by removing the old weir and seating the new assembly into the skimmer throat.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54199689642168,"sku":"B003UVG68G","price":65.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-weir-gate-front-view.jpg?v=1790597977"},{"product_id":"pentair-wall-connector-kit-for-racer-feed-line-2-o-rings-direct-fit-replacement-leak-resistant","title":"Pentair Wall Connector Kit for Racer Feed Line — 2 O-Rings, Direct-Fit Replacement, Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eReplacement wall connector kit for Pentair Racer feed line that includes two O-rings to help restore a secure, leak-resistant spa plumbing connection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Pentair Wall Connector Kit is designed as a direct-fit accessory for Pentair Racer installations requiring a new feed line connection or replacement O-rings. The kit simplifies maintenance by combining the connector and two sealing O-rings, so you can address common leak points without sourcing parts individually. It fits cleanly into existing spa or pool equipment layouts where Pentair Racer components are used.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this connector kit stop leaks and protect the feed line?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes two precision molded O-rings that compress to form a reliable seal between the feed line and the wall connector body. Properly installed, these parts reduce water weeping and maintain system pressure. Using the correct connector prevents uneven wear that can cause future failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo factory-sized O-rings for consistent sealing performance\u003c\/li\u003e\n  \u003cli\u003eConnector body shaped for secure feed line engagement\u003c\/li\u003e\n  \u003cli\u003eReduces need for temporary fixes like tape or nonstandard seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this Pentair kit easy to install for a routine maintenance job?\u003c\/h3\u003e\n\u003cp\u003eYes — the connector and O-rings are intended for straightforward replacement jobs and routine maintenance. Installation typically requires basic hand tools and follows standard plumbing practices: drain the line, remove the old connector, seat the new O-rings, and tighten the connector to manufacturer torque recommendations. If you encounter corrosion or unusual fittings, a service technician can complete the work quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple swap-in design for most Pentair Racer setups\u003c\/li\u003e\n  \u003cli\u003eRequires basic tools and minimal technical skill\u003c\/li\u003e\n  \u003cli\u003eIdeal for scheduled maintenance or emergency part replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich systems and parts is this wall connector kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe connector is made for use with Pentair Racer feed lines and related spa plumbing where the original wall connector type is specified. It works best as a direct replacement for like-for-like Pentair components and matches standard Racer connection dimensions. Verify model compatibility by checking your equipment manual or part numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Pentair Racer feed line configurations\u003c\/li\u003e\n  \u003cli\u003eMatches OEM dimensions for direct replacement\u003c\/li\u003e\n  \u003cli\u003eCheck part numbers against your spa or pool equipment documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this replacement kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is manufactured to Pentair standards using durable plastics and elastomers suitable for wet environments. O-rings are molded from resilient sealing materials to resist compression set and common pool chemicals. When installed correctly and maintained, the connector and seals offer extended service life compared with makeshift repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable connector body designed for repeated installations\u003c\/li\u003e\n  \u003cli\u003eO-rings molded to resist common pool and spa chemicals\u003c\/li\u003e\n  \u003cli\u003eEngineered for reliable, repeated sealing performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair Wall Connector Kit with two O-rings is aimed at pool and spa owners, service technicians, and maintenance teams who need a dependable, OEM-style replacement for a Racer feed line connector. It suits routine maintenance, emergency part swaps, and projects where preserving system integrity and avoiding leaks are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include everything needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes the wall connector and two O-rings; basic tools and any cleaned or replacement fasteners may be needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this connector with other brands' feed lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It's made for Pentair Racer systems; cross-brand use may require dimension checks and is not guaranteed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54199735156920,"sku":"B00O5ETEY0","price":71.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-wall-connector-front.jpg?v=1790598874"},{"product_id":"pentair-sta-rite-float-assembly-08650-0079-with-o-ring-oem-replacement-drop-in-fit-for-valve-housings","title":"Pentair Sta‑Rite Float Assembly 08650-0079 with O‑Ring — OEM replacement, drop‑in fit for valve housings","description":"\u003cstrong\u003ePentair Sta‑Rite 08650‑0079 is a direct-replacement float assembly with an O‑ring designed to restore reliable water-level sensing in compatible Pentair\/Sta‑Rite pool and spa control valves.\u003c\/strong\u003e\n\n\u003cp\u003eThis OEM float assembly (part number 08650‑0079, catalog 4020‑08) is a precision replacement component for Sta‑Rite and Pentair valve packages that require accurate buoyancy and a tight seal. The unit includes an integrated O‑ring to reduce leaks and maintain consistent operation over repeated cycles. It’s engineered to meet the original factory dimensions and tolerances so installation is straightforward and performance matches the original equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this float assembly do in my pool system?\u003c\/h3\u003e\n\u003cp\u003eThe float assembly senses and reacts to water level changes inside a valve body or float chamber, allowing automatic control systems to open or close ports correctly. By moving with the waterline, it helps actuate linked mechanisms that maintain fill levels or trigger safety cutoffs. Using the correct OEM float reduces the risk of misalignment or premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores buoyant sensing for accurate valve actuation\u003c\/li\u003e\n  \u003cli\u003eIntegrated O‑ring prevents leakage at the mounting point\u003c\/li\u003e\n  \u003cli\u003eMatches original Sta‑Rite dimensions for drop-in replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the Pentair Sta‑Rite 08650‑0079 float?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for anyone familiar with basic pool equipment servicing: depressurize and drain the valve chamber, remove the old float, then seat the replacement and its O‑ring into place. No special tools are usually required beyond standard hand tools; follow your valve’s service manual for torque and reassembly steps. If the valve shows wear beyond the float, consider inspecting seals and internal components while the unit is open.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-in fit for compatible Sta‑Rite valve housings\u003c\/li\u003e\n  \u003cli\u003eRequires only basic hand tools and valve depressurization\u003c\/li\u003e\n  \u003cli\u003eRecommended to inspect surrounding seals and ports during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich systems and models is part 08650‑0079 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis float is intended for use with Pentair and Sta‑Rite valves that reference part number 08650‑0079 or catalog 4020‑08 in their parts lists. It’s best used as the OEM-specified replacement to keep valve function consistent with factory design. Confirm compatibility by checking your valve’s parts diagram or matching the old float’s shape and mounting method before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM Pentair \/ Sta‑Rite replacement part number 08650‑0079\u003c\/li\u003e\n  \u003cli\u003eCatalog cross-reference: 4020‑08\u003c\/li\u003e\n  \u003cli\u003eFits valve models that list this float in their service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the float and O‑ring last, and how do I maintain them?\u003c\/h3\u003e\n\u003cp\u003eLongevity depends on water chemistry and mechanical wear; in properly maintained pool water, the float and O‑ring can provide many seasons of service. Regular inspections for cracks, deformation or hardened O‑rings help prevent leaks and erratic valve behavior. Replace the O‑ring if it shows any signs of compression set, cracking, or chemical damage to maintain a reliable seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eService life varies with chemical balance and mechanical stress\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for tears, flattening, or swelling\u003c\/li\u003e\n  \u003cli\u003eReplace the O‑ring immediately upon visible degradation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, pool service professionals, and DIY pool owners who need a factory‑spec replacement float for Pentair\/Sta‑Rite valve assemblies. If you’re restoring proper automatic water-level control or performing scheduled valve maintenance, part 08650‑0079 with its included O‑ring gives a quick, reliable way to return a valve to original performance. Always verify model compatibility against your valve’s parts list before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the O‑ring included with part 08650‑0079?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this Pentair Sta‑Rite float assembly ships with the integrated O‑ring included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this float in non‑Sta‑Rite valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if the valve lists Pentair part 08650‑0079 or the float matches the original dimensions and mounting style.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54199781228728,"sku":"B004VU8TL2","price":73.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-sta-rite-float-front-view.jpg?v=1790599731"},{"product_id":"pentair-high-flow-manual-relief-valve-98209800-replacement-for-clean-clear-cartridge-filters-fast-depressurization","title":"Pentair High-Flow Manual Relief Valve 98209800 — Replacement for Clean \u0026 Clear Cartridge Filters, Fast Depressurization","description":"\u003cp\u003e\u003cstrong\u003ePentair 98209800 is a high-flow manual relief valve designed to replace the original relief valve on compatible Pentair cartridge pool and spa filters, restoring safe pressure release and convenient maintenance access.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your cartridge filter pressure needs a reliable manual release, the Pentair 98209800 High Flow Manual Relief Valve provides a direct, OEM-compatible swap. Engineered to match Pentair Clean \u0026amp; Clear cartridge systems, this replacement valve fits where the factory part did and helps you relieve trapped pressure quickly, making cartridge removal and cleaning easier and safer.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve restore filter maintenance convenience?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or missing relief valve with the 98209800 lets you depressurize the filter housing without tools, simplifying cartridge removal. The manual action gives you immediate pressure relief so you can open the lid safely and access internal components for inspection or cleaning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManual operation for on-demand depressurization\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for Pentair cartridge filters\u003c\/li\u003e\n  \u003cli\u003eReduces mess and risk when opening the filter housing\u003c\/li\u003e\n  \u003cli\u003eDurable design intended for pool and spa environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Pentair Clean \u0026amp; Clear cartridge filter?\u003c\/h3\u003e\n\u003cp\u003eThe 98209800 is made to be compatible with Pentair Clean \u0026amp; Clear cartridge models that use the same relief-valve connection. Check your filter’s parts list or compare the original valve’s mounting style to ensure a match before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM part number: Pentair 98209800\u003c\/li\u003e\n  \u003cli\u003eFits Clean \u0026amp; Clear cartridge series that share the valve interface\u003c\/li\u003e\n  \u003cli\u003eIdeal when current relief valve is cracked, missing, or nonfunctional\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility with your model number or service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat benefits does the high-flow design provide?\u003c\/h3\u003e\n\u003cp\u003eThe high-flow geometry enables faster pressure equalization, so air and built-up pressure exit the filter more rapidly during maintenance. That reduces the time you spend prepping the filter for access and helps prevent sudden sprays or splashes when the lid is removed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster depressurization compared with standard relief valves\u003c\/li\u003e\n  \u003cli\u003eMinimizes residual pressure for safer cartridge handling\u003c\/li\u003e\n  \u003cli\u003eLimits pooled water or sudden discharge when opening\u003c\/li\u003e\n  \u003cli\u003eRobust flow path suitable for pool and spa use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation for a DIY pool owner?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic pool equipment tasks. Typically you remove the old valve, inspect the seat, and thread or push the replacement into place—no special tools required in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwap-out replacement; follow existing mounting method\u003c\/li\u003e\n  \u003cli\u003eHand-tighten or secure per your filter’s instructions\u003c\/li\u003e\n  \u003cli\u003eInspect O-rings or gaskets and replace if worn\u003c\/li\u003e\n  \u003cli\u003eTest for leaks after installation before normal operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair 98209800 High Flow Manual Relief Valve is intended for pool and spa owners, service technicians, and maintenance professionals who use Pentair Clean \u0026amp; Clear cartridge filters and need a reliable, OEM-style replacement valve. It suits anyone seeking faster, safer depressurization during routine cleaning or filter servicing and is especially useful when the original valve is damaged, leaking, or missing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 98209800 an original Pentair part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 98209800 is an OEM Pentair replacement valve designed for compatible Clean \u0026amp; Clear cartridge filters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the replacement valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations are hand-tightened without special tools, though check your filter manual and replace any worn O-rings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54199945494712,"sku":"B001E00D8O","price":68.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-98209800-front-view.jpg?v=1790603572"},{"product_id":"pentair-2-cpvc-check-valve-rebuild-kit-263042z-oem-seals-poppet-springs-for-diverter-valves","title":"Pentair 2\" CPVC Check Valve Rebuild Kit 263042Z — OEM seals, poppet \u0026 springs for diverter valves","description":"\u003cp\u003e\u003cstrong\u003ePentair 263042Z is a 2-inch CPVC check valve rebuild kit designed to restore reliable flow control in Pentair diverter valves for pools and spas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact replacement kit contains the components you need to rebuild a 2\" CPVC check\/diverter valve used in Pentair pool and spa plumbing. It fits the manufacturer’s 2-inch CPVC housings and replaces worn seals, poppets, and related internal parts so your system returns to consistent, leak-free operation without replacing the entire valve assembly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and how do they work together?\u003c\/h3\u003e\n\u003cp\u003eThe rebuild kit supplies the internal parts that commonly fail first: sealing elements, the check poppet, springs, and any specific spacers or retainers required for the 2\" CPVC Pentair diverter design. Together these parts recreate the internal geometry and sealing surfaces that control unidirectional flow and prevent backflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-compatible poppet to restore seating and valve action\u003c\/li\u003e\n  \u003cli\u003eSeals and O-rings sized for 2\" CPVC connections\u003c\/li\u003e\n  \u003cli\u003eSprings and retainers that maintain reliable valve travel\u003c\/li\u003e\n  \u003cli\u003eComponents shaped to fit Pentair diverter valve housings precisely\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the rebuild process for a homeowner or technician?\u003c\/h3\u003e\n\u003cp\u003eReplacing the internal kit is a straightforward repair for anyone comfortable with basic pool plumbing and hand tools. The kit avoids cutting pipe or replacing the entire valve body, so downtime and parts cost are reduced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple disassembly of the valve body to access internals\u003c\/li\u003e\n  \u003cli\u003eHand tools and basic sealing compound may be all that’s needed\u003c\/li\u003e\n  \u003cli\u003eClearances and part orientation match the original Pentair design\u003c\/li\u003e\n  \u003cli\u003eTypical repair time is much shorter than a full valve replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my existing Pentair CPVC 2\" diverter valve?\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for Pentair 2\" CPVC check\/diverter valves, the 263042Z kit matches the original internal dimensions and sealing profiles. Confirm compatibility by checking your valve model and size—this kit is intended for 2-inch CPVC Pentair valve housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended for 2\" CPVC Pentair diverter\/check valve models\u003c\/li\u003e\n  \u003cli\u003eReplaces internal parts without modifying the valve body\u003c\/li\u003e\n  \u003cli\u003eNot a universal check valve kit—verify valve size and brand\u003c\/li\u003e\n  \u003cli\u003eOEM-fit components reduce risk of leaks after rebuild\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance benefits can I expect after installing the kit?\u003c\/h3\u003e\n\u003cp\u003eAfter rebuilding the valve with this kit, expect improved sealing, predictable one-way flow control, and fewer leaks from worn internal parts. Restoring proper valve internals helps protect pumps and piping from backflow and reduces the need for repeat repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestored sealing surfaces to prevent drips and weeps\u003c\/li\u003e\n  \u003cli\u003eSmoother valve action and more reliable flow direction\u003c\/li\u003e\n  \u003cli\u003eExtends the service life of the existing Pentair valve body\u003c\/li\u003e\n  \u003cli\u003eCost-effective alternative to full valve replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this rebuild kit is for: this Pentair 263042Z kit is ideal for pool and spa owners, service technicians, and maintenance pros who already have a Pentair 2\" CPVC diverter or check valve and want an OEM-style internal repair. It’s a practical, lower-cost option for restoring valve performance when the body remains sound but internal seals or moving parts are worn.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with all Pentair 2\" CPVC valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Pentair 2\" CPVC diverter\/check valves designed for this OEM rebuild; confirm your valve model and size before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the rebuild kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required—basic hand tools and standard plumbing practices are typically sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54200488853688,"sku":"B008HLKEWI","price":80.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-check-valve-kit-front-packaging.jpg?v=1790614569"},{"product_id":"pentair-replacement-lid-assembly-for-high-capacity-automatic-feeder-hc-3315-3330-3340-r172385d-oem-fit-durable-seal","title":"Pentair Replacement Lid Assembly for High-Capacity Automatic Feeder HC-3315\/3330\/3340 — R172385D OEM Fit, Durable Seal","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair R172385D is a complete lid assembly designed to replace the top cover on Pentair high-capacity automatic feeders HC-3315, HC-3330 and HC-3340, restoring secure sealing and proper feeder operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement lid assembly fits Pentair Pool and Spa high-capacity automatic feeders and arrives ready to swap into place—manufactured in the United States and engineered to match the original equipment dimensions and mounting points. If your feeder lid is cracked, warped, or missing parts, installing the R172385D returns the feeder to a serviceable condition without the expense of a full-unit replacement. The part is a direct-fit component made specifically for the three HC-series models, so alignment, screw locations and sealing surfaces correspond to factory specifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this lid assembly affect my feeder’s performance?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a damaged or compromised lid with the correct OEM part helps maintain the feeder’s designed dispensing behavior by preserving the intended chemical containment and mechanical alignment. A proper lid reduces the risk of leaks and prevents debris from entering the feeder chamber, which can interfere with the metering mechanism.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores original sealing surface to limit evaporation and splashing\u003c\/li\u003e\n  \u003cli\u003ePreserves alignment for metering components to function correctly\u003c\/li\u003e\n  \u003cli\u003ePrevents contamination from leaves, dirt, and insects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the R172385D easy to install on HC-3315, HC-3330 and HC-3340 feeders?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the R172385D is built as a direct lid replacement, so installation is straightforward for anyone comfortable with basic pool equipment maintenance. Typical installation requires removing the old lid, aligning the replacement, and securing it with the existing fasteners or supplied hardware if included.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo special tools beyond a screwdriver or wrench are normally needed\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory screw holes and sealing surfaces for quick fitment\u003c\/li\u003e\n  \u003cli\u003eCan be installed during routine maintenance or part replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect from this Pentair lid?\u003c\/h3\u003e\n\n\u003cp\u003eThe lid assembly is manufactured to Pentair specifications in the United States, using materials chosen for durability in pool and spa environments. Its construction aims to resist the routine wear faced by feeder covers, such as sun exposure and chemical contact, helping extend the service life of the feeder when combined with proper maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMade to OEM dimensions for consistent fit and function\u003c\/li\u003e\n  \u003cli\u003eEngineered to withstand normal pool chemistry and UV exposure\u003c\/li\u003e\n  \u003cli\u003eFactory-origin part reduces the uncertainty of third-party alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part work with my existing hardware and seals?\u003c\/h3\u003e\n\n\u003cp\u003eThe R172385D is intended as a direct replacement for the HC-3315, HC-3330 and HC-3340 feeder lids and is compatible with the original mounting hardware and sealing components in most cases. If original gaskets or fasteners are heavily worn, replace those items during installation to ensure the best sealing and longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits original screw patterns and latch points on specified models\u003c\/li\u003e\n  \u003cli\u003eWorks with factory gaskets; consider gasket replacement if degraded\u003c\/li\u003e\n  \u003cli\u003eUse existing or equivalent-grade fasteners for secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners or service professionals who operate Pentair high-capacity automatic feeders HC-3315, HC-3330 or HC-3340 and need a reliable, factory-matched replacement lid. This part is appropriate for maintenance techs restoring an older feeder, homeowners completing repairs without swapping the entire unit, and anyone who wants an OEM-quality cover manufactured in the United States to maintain original fit and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this lid fit my HC-3330 feeder?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The R172385D is a direct replacement designed for HC-3315, HC-3330 and HC-3340 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need new screws or gaskets to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often the existing hardware fits, but replace worn screws or gaskets to ensure a proper seal and long-term performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54203923267768,"sku":"B004VU97YU","price":91.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-r172385d-front-lid-assembly.jpg?v=1790621611"},{"product_id":"pentair-t29-toilet-fill-flush-valve-replacement-fluidmaster-400-ab-compatible-direct-swap-repair","title":"Pentair T29 Toilet Fill\/Flush Valve Replacement — Fluidmaster 400 Ab Compatible, Direct-Swap Repair","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair T29 Valve Fluidmaster Replacement 400 Ab is a direct-replacement toilet fill\/flush valve designed to restore reliable tank operation and reduce leaks in compatible fixtures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement valve from Pentair fits systems that accept the T29\/Fluidmaster-style 400 Ab unit and provides a straightforward swap for worn or failing tank hardware. Built to match original dimensions and flow performance, it helps reestablish consistent fill heights and proper flush action without replacing the whole toilet. The part is intended for plumbing repair and retrofit projects where a like-for-like valve is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this valve matches my toilet?\u003c\/h3\u003e\n\u003cp\u003eIdentify compatibility by comparing the existing valve model and connection style. The T29 Fluidmaster replacement mirrors the common 400 Ab footprint and inlet\/outlet arrangements used in many residential tanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your current valve labeling for “Fluidmaster 400” or similar codes.\u003c\/li\u003e\n  \u003cli\u003eMeasure mounting hole spacing and inlet thread size against the replacement.\u003c\/li\u003e\n  \u003cli\u003eConfirm float and refill tube placements match your tank’s layout.\u003c\/li\u003e\n  \u003cli\u003eReview manufacturer guidance for model cross-reference before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and time are needed to install the T29 replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires only basic plumbing tools and about 20–40 minutes for a standard tank. The design aims for a simple swap with minimal disassembly and no special parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: adjustable wrench, screwdriver, towel, bucket for residual water.\u003c\/li\u003e\n  \u003cli\u003eTurn off water supply and drain the tank before removal.\u003c\/li\u003e\n  \u003cli\u003eLoosen the retaining nut, remove old valve, insert new valve, and tighten securely.\u003c\/li\u003e\n  \u003cli\u003eAdjust float height and test for correct fill level and leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance aspects should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eAfter installing the Pentair T29 Valve, expect stable tank refill and reduced chance of continuous running if the original problem was valve wear. It restores standard flow characteristics for compatible systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe-establishes manufacturer-specified fill height control.\u003c\/li\u003e\n  \u003cli\u003eReduces intermittent water flow caused by degraded seals or components.\u003c\/li\u003e\n  \u003cli\u003eMaintains typical flush performance when adjusted properly.\u003c\/li\u003e\n  \u003cli\u003eWorks with common refill tubes and flapper arrangements used in household toilets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement part for? This Pentair T29 Valve Fluidmaster Replacement 400 Ab suits homeowners, plumbers, and maintenance technicians who need a direct, cost-effective repair for a leaky or malfunctioning toilet tank valve. It’s appropriate when the original valve shows wear, tank water level issues, or continuous running, and when the plumbing fixture is compatible with a T29\/Fluidmaster 400-style unit. Choose this part if you want a straightforward, like-for-like swap to return a toilet to dependable operation without extensive modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair T29 a direct replacement for Fluidmaster 400 valves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed to match the Fluidmaster 400 Ab footprint, but verify mounting and thread sizes before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this valve without a plumber?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Basic hand tools and 20–40 minutes are usually sufficient for a typical homeowner installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54204633284792,"sku":"B004VU8TBC","price":107.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-t29-front-view.jpg?v=1790635247"},{"product_id":"pentair-autofill-float-valve-t26-brass-water-leveler-corrosion-resistant-easy-install-replacement","title":"Pentair AutoFill Float Valve T26 Brass water-leveler — corrosion-resistant, easy-install replacement","description":"\u003cp\u003e\u003cstrong\u003ePentair's brass AutoFill float valve is a durable replacement water leveler designed to automatically maintain tank or reservoir levels with reliable, corrosion-resistant brass construction.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis T26-style Pentair float valve replaces worn or damaged water-level controls in ponds, livestock tanks, condensate pans, and many industrial or residential reservoirs. Engineered for simple installation and long service life, the brass body and float mechanism minimize leaks and resist mineral buildup. The valve restores automatic refill capability so you don't need to monitor water constantly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Pentair brass float valve maintain consistent water levels?\u003c\/h3\u003e\n\u003cp\u003eThe valve uses a buoyant float linked to an internal shutoff mechanism. As water rises, the float lifts and gradually closes the valve; when the level drops, the float descends and reopens the flow path. This mechanical action requires no electricity and adapts to variable supply pressure within typical operating ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass body resists corrosion and rough water conditions.\u003c\/li\u003e\n  \u003cli\u003eFloat arm transfers motion to the internal shutter for shutoff.\u003c\/li\u003e\n  \u003cli\u003eWorks with standard plumbing fittings for quick hookup.\u003c\/li\u003e\n  \u003cli\u003eSelf-regulating action prevents overfill when properly sized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation steps are needed to replace a T26 valve?\u003c\/h3\u003e\n\u003cp\u003eReplacing a T26 Pentair valve is straightforward for anyone comfortable with basic plumbing. Shut off the water supply, remove the old valve, clean the connection threads or mounting surface, and install the new brass valve using appropriate sealant or tape. After mounting, adjust the float arm to set the desired stop height and check for leaks at operating pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off feed water and drain the line before removal.\u003c\/li\u003e\n  \u003cli\u003eUse thread sealant or PTFE tape on pipe connections.\u003c\/li\u003e\n  \u003cli\u003eSet float position to achieve the correct refill point.\u003c\/li\u003e\n  \u003cli\u003eTest at working pressure and tighten fittings as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications and environments suit this Pentair AutoFill valve?\u003c\/h3\u003e\n\u003cp\u003eThe brass float valve is suitable for residential, agricultural and light-industrial uses where reliable automatic water refilling is required. Common placements include livestock watering troughs, rain barrels, HVAC condensate pans, fountain reservoirs and cold-water storage tanks. Its brass construction is beneficial in settings with moderate mineral content or condensation exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLivestock and agricultural water tanks.\u003c\/li\u003e\n  \u003cli\u003eGarden ponds, fountains and decorative basins.\u003c\/li\u003e\n  \u003cli\u003eHVAC condensate and equipment drain pans.\u003c\/li\u003e\n  \u003cli\u003eReplacement for worn T26-style fittings on tanks and cisterns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I troubleshoot common issues after installation?\u003c\/h3\u003e\n\u003cp\u003eIf the valve leaks, first verify threads and seals are tight and properly sealed. A valve that won’t shut typically needs float arm adjustment, cleaning of the seat area, or replacement of a worn internal seal. Intermittent operation often indicates debris in the line or mineral deposits on the seating surfaces that can be cleaned or flushed out.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck and re-tape threaded connections for leaks.\u003c\/li\u003e\n  \u003cli\u003eClean seat and float components to remove scale or debris.\u003c\/li\u003e\n  \u003cli\u003eAdjust arm angle to fine-tune shutoff level.\u003c\/li\u003e\n  \u003cli\u003eReplace valve if internal parts show corrosion or wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair T26 brass AutoFill float valve is aimed at homeowners, landscapers, farmers and facility managers who need a low-maintenance, mechanical solution for keeping tanks and reservoirs topped off. Choose this valve if you want a straightforward replacement with a corrosion-resistant brass body that fits common plumbing setups and tolerates outdoor or humid environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Pentair valve compatible with T26 fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s a T26-style replacement designed to fit standard T26 mounting and connection dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this valve outdoors in cold or mineralized water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Brass resists corrosion and is suitable outdoors; however, extreme freezing or heavy mineral buildup may require winterization or periodic cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54204646883512,"sku":"B003ZJLBMO","price":135.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-brass-valve-front-view.jpg?v=1790635630"},{"product_id":"pentair-cpvc-check-valve-for-pool-pumps-2-port-straight-oem-263042-one-way-flow-protection","title":"Pentair CPVC Check Valve for Pool Pumps 2-Port Straight — OEM 263042, One-Way Flow Protection","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair 263042 is a genuine CPVC two-port straight check valve designed to protect pool pumps by allowing one-way water flow and preventing backflow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for routine pool maintenance and pump protection, this original-equipment manufacturer (OEM) check valve fits into standard CPVC plumbing runs to stop reverse flow that can damage pumps or stir debris. Its straight two-port configuration makes it simple to install in-line on suction or return lines where uninterrupted one-directional flow is required. No additional assembly is needed, so it’s ready to install out of the box.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 2-port straight design simplify installation?\u003c\/h3\u003e\n\u003cp\u003eThe straight-through layout aligns with common CPVC piping, minimizing the need for elbows or extra fittings. This saves time during installation and reduces potential leak points. Its compact profile fits easily into tight plumbing chases behind equipment pads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard two-port configuration for direct in-line connection\u003c\/li\u003e\n  \u003cli\u003eCompatible with CPVC pool piping systems\u003c\/li\u003e\n  \u003cli\u003eNo assembly or adapters required for many installations\u003c\/li\u003e\n  \u003cli\u003eCompact size reduces need for extra fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does this check valve provide for my pool pump?\u003c\/h3\u003e\n\u003cp\u003eBy permitting flow in only one direction, the valve prevents backflow that can lead to pump stress, water hammer, or contaminants returning to the pump. It helps maintain prime by stopping siphoning when the pump is off. The result is reduced wear on pump seals and extended service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStops reverse flow that could damage pump internals\u003c\/li\u003e\n  \u003cli\u003eReduces risk of loss of prime and water hammer\u003c\/li\u003e\n  \u003cli\u003eKeeps debris from backflowing into the pump housing\u003c\/li\u003e\n  \u003cli\u003eSupports longer, more reliable pump operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and compatibility details I should know?\u003c\/h3\u003e\n\u003cp\u003eThe body is molded from CPVC, chosen for chemical resistance and compatibility with common pool treatment chemicals. Because it’s an OEM Pentair part (part number 263042), it’s engineered to integrate with Pentair systems and many standard CPVC plumbing setups. Check dimensions and port sizes against your existing piping before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from CPVC for corrosion and chemical resistance\u003c\/li\u003e\n  \u003cli\u003eOEM Pentair part number 263042 for reliable fit and function\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with standard CPVC pool plumbing\u003c\/li\u003e\n  \u003cli\u003eVerify port size and pipe compatibility prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain or inspect this check valve?\u003c\/h3\u003e\n\u003cp\u003ePeriodic inspection during seasonal maintenance is recommended: look for cracks, mineral buildup, or a sticking internal flap that can impede one-way flow. Cleaning or replacement is simple—remove the valve from the line and examine the internal seat and disc. Because it requires no assembly, swapping in a new unit is quick if wear is detected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect during seasonal pool equipment checks\u003c\/li\u003e\n  \u003cli\u003eLook for wear, cracks, or build-up affecting the seal\u003c\/li\u003e\n  \u003cli\u003eEasy to remove and replace without special tools\u003c\/li\u003e\n  \u003cli\u003eReplace if internal disk does not seat properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners, service technicians, and maintenance pros who need a dependable, OEM-quality CPVC check valve for routine pump protection will value the Pentair 263042. It’s suited for backyard pools, commercial pool equipment pads, and anyone wanting a straightforward in-line solution to prevent backflow and reduce pump wear. If you use CPVC plumbing and want a no-fuss replacement part that integrates with Pentair systems, this valve is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair 263042 compatible with my CPVC plumbing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed for standard CPVC pool piping; verify port size to ensure a proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the check valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special assembly is required; basic plumbing tools for CPVC connection are usually sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54204667920568,"sku":"B0039PXC8K","price":115.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-263042-front-view.jpg?v=1790635964"},{"product_id":"pentair-replacement-debris-bag-for-kreepy-krauly-legend-legend-ii-360002-snap-lock-mesh-collector","title":"Pentair Replacement Debris Bag for Kreepy Krauly Legend \u0026 Legend II 360002 — Snap‑Lock Mesh Collector","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair Kreepy Krauly 360002 is a replacement debris collection bag with a snap-lock closure designed for Legend and Legend II automatic pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your pool cleaner operating at peak efficiency by swapping in an authentic debris bag built for the Kreepy Krauly Legend series. This replacement collection bag captures leaves, twigs and other debris while allowing water to pass through. The built-in snap lock secures the bag to the cleaner so you can empty and reinstall the bag quickly without tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this debris bag attach to my Legend or Legend II cleaner?\u003c\/h3\u003e\n\n\u003cp\u003eThe bag uses a snap-lock mounting system that lines up with the cleaner’s bag frame and clicks into place for a secure fit. It installs easily by aligning the openings and pressing until you hear the snap. Removal is just as simple—unlock the snap and pull the bag away for emptying.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSnap-lock design for fast attachment and removal\u003c\/li\u003e\n  \u003cli\u003eForm-matched to Legend and Legend II bag frames\u003c\/li\u003e\n  \u003cli\u003eNo tools needed for installation\u003c\/li\u003e\n  \u003cli\u003eSecure fit reduces accidental detachment during cleaning cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of debris will the 360002 bag capture?\u003c\/h3\u003e\n\n\u003cp\u003eThe bag is intended for typical pool contaminants such as leaves, pine needles, small twigs and insect matter that automatic cleaners encounter. Its mesh lets water flow while retaining solid particles, helping maintain cleaner pool surfaces between manual skimming. It is not intended to filter fine sand or replace the pool’s main filtration system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHolds common yard debris collected by automatic cleaners\u003c\/li\u003e\n  \u003cli\u003eMesh allows continuous water circulation through the bag\u003c\/li\u003e\n  \u003cli\u003eReduces frequency of manual skimming and cleaning cycles\u003c\/li\u003e\n  \u003cli\u003eNot a substitute for pool filter cartridges or DE grids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and clean the replacement debris bag?\u003c\/h3\u003e\n\n\u003cp\u003eRoutine maintenance is straightforward: remove the bag, empty its contents, and rinse with a hose to dislodge trapped debris. Inspect the snap-lock area and mesh for wear or tears; replace the bag if the mesh is compromised or the snap no longer secures firmly. Store dry when not in use to prolong the bag’s life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEmpty solids after each heavy debris pickup\u003c\/li\u003e\n  \u003cli\u003eRinse mesh with a garden hose; avoid high-pressure washers\u003c\/li\u003e\n  \u003cli\u003eCheck snap-lock fittings for cracks or deformation\u003c\/li\u003e\n  \u003cli\u003eReplace when mesh or closure shows significant wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this bag work with other Kreepy Krauly models?\u003c\/h3\u003e\n\n\u003cp\u003eThis 360002 bag is manufactured to fit the Kreepy Krauly Legend and Legend II cleaners specifically. While similar in appearance to other debris bags, dimensions and snap-lock placement vary by model, so compatibility is not guaranteed for other versions of Kreepy Krauly devices.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for Legend and Legend II models\u003c\/li\u003e\n  \u003cli\u003eCheck model compatibility before purchasing for other cleaners\u003c\/li\u003e\n  \u003cli\u003eOEM construction matches original Pentair specifications\u003c\/li\u003e\n  \u003cli\u003eUsing the correct bag helps maintain cleaning performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and maintenance professionals who use Pentair Kreepy Krauly Legend or Legend II automatic cleaners and need a reliable, OEM replacement debris bag with an easy snap-lock attachment. It’s a practical choice if you want a direct-fit spare part that restores collection performance without modifying your cleaner or replacing the system’s filtration components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 360002 debris bag compatible with both Legend and Legend II?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This 360002 bag is made to fit Kreepy Krauly Legend and Legend II models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the debris bag?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace it when the mesh tears or the snap-lock no longer secures; inspect regularly after heavy seasons.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54204960374968,"sku":"B004VJSR5G","price":105.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-kreepy-krauly-360002-front-view.jpg?v=1790638147"},{"product_id":"pentair-pass-through-cell-for-intellichlor-winter-start-up-bypass-model-520588-non-electrolytic-protection","title":"Pentair Pass-Through Cell for IntelliChlor — Winter\/Start-Up Bypass Model 520588, Non-Electrolytic Protection","description":"\u003cp\u003e\u003cstrong\u003ePentair's Pass-Through Cell for IntelliChlor is a factory-style dummy bypass cell used during winterizing or start-up to protect and maintain your pool automation system.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement pass-through cell (Pentair model 520588) is designed to work with IntelliChlor salt chlorination and automation systems, giving technicians and pool owners a safe, simple way to route water when the primary electrolytic cell is offline. It attaches in place of the active cell to preserve plumbing alignment and electrical isolation while the system is winterized or being serviced.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pass-through cell help during winterizing?\u003c\/h3\u003e\n\u003cp\u003eWhen you winterize a salt system, removing the active cell avoids freeze damage and extends its service life. The Pentair pass-through cell fills the physical and hydraulic spot of the active unit without energizing the electrolytic components, ensuring plumbing stays intact and leak-free.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for IntelliChlor systems to maintain plumbing continuity.\u003c\/li\u003e\n  \u003cli\u003eNon-electrolytic design prevents electrical exposure during storage.\u003c\/li\u003e\n  \u003cli\u003eDurable materials resist seasonal temperature changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the pass-through cell for system start-up or repairs?\u003c\/h3\u003e\n\u003cp\u003eYes. Install the pass-through cell while performing diagnostics or repairs to bypass the electrolyte cell safely. It lets you run water through the system for pressure testing or filtration work without operating the chlorinator.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnables pressure testing and filter backwash without energizing the chlorinator.\u003c\/li\u003e\n  \u003cli\u003eSimplifies component swaps and service procedures.\u003c\/li\u003e\n  \u003cli\u003eHelps technicians isolate problems without removing plumbing fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat compatibility and installation details should I know?\u003c\/h3\u003e\n\u003cp\u003eThe part is specified for IntelliChlor-family equipment and matches factory plumbing dimensions for a straightforward swap. Installation is generally mechanical — remove the electrolytic cell and fit this bypass cell in its place, following Pentair torque and sealing recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eModel number: Pentair 520588, for IntelliChlor systems.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement form factor to preserve alignment and seals.\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools required; follow manufacturer installation steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this affect my automation or control settings?\u003c\/h3\u003e\n\u003cp\u003eNo electrical controls are active when the pass-through cell is installed; it is a mechanical bypass only. The automation head and control modules remain installed but will not engage chlorination until the active electrolytic cell is reinstalled and the system is powered and configured.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDoes not activate chlorination functions while in place.\u003c\/li\u003e\n  \u003cli\u003eAllows continuing use of filters and pumps as needed during maintenance.\u003c\/li\u003e\n  \u003cli\u003ePrevents unnecessary alarms tied to a missing electrolytic cell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool service professionals and conscientious pool owners who use Pentair IntelliChlor systems and need a purpose-built bypass for winter storage, maintenance, or diagnostic work. If you plan to remove the electrolytic cell for any season or service reason, this Pentair pass-through cell provides a secure, compatible solution to maintain plumbing integrity and simplify reassembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pass-through cell compatible with IntelliChlor models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Pentair model 520588 is designed as a direct pass-through replacement for IntelliChlor systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I run my pool while the pass-through cell is installed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Pumps and filters can run; the pass-through disables chlorinator operation during service or winterizing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205035446456,"sku":"B004VU8A1Q","price":129.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-intellichlor-pass-through-cell-overview_jpg.jpg?v=1790639146"},{"product_id":"pentair-thermistor-replacement-for-max-e-therm-mastertemp-heaters-oem-42001-0053s-accurate-water-temperature-sensor","title":"Pentair Thermistor Replacement for Max‑E‑Therm \u0026 MasterTemp Heaters — OEM 42001-0053S, Accurate Water Temperature Sensor","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair 42001-0053S thermistor is a direct replacement temperature sensor for Max-E-Therm and MasterTemp pool heaters, providing accurate temperature feedback to your heater control system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for use in Pentair pool and spa heating systems, this thermistor (often called a temperature sensor) monitors water temperature and communicates readings to the heater’s electronics so the system can regulate heat output. It’s sold under Pentair’s OEM part number 42001-0053S and fits the Max-E-Therm and MasterTemp series models, making it a common service part for routine maintenance or sensor failure replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this thermistor affect my heater’s performance?\u003c\/h3\u003e\n\u003cp\u003eA functioning thermistor ensures the heater receives correct temperature data so it can maintain target setpoints and avoid unnecessary cycling. When the sensor reads accurately, the heater runs more efficiently and responds properly to user adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasures pool\/spa water temperature and sends signal to the control board.\u003c\/li\u003e\n  \u003cli\u003ePrevents short cycling by providing stable, consistent temperature feedback.\u003c\/li\u003e\n  \u003cli\u003eHelps the controller decide when to ignite and when to shut off.\u003c\/li\u003e\n  \u003cli\u003eOEM compatibility reduces risk of fitment or calibration issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the Pentair 42001-0053S compatible with my model?\u003c\/h3\u003e\n\u003cp\u003eThis thermistor is specified for Pentair Max-E-Therm and MasterTemp heater models; confirm part numbers in your heater manual or on the existing sensor to ensure a correct match. If your heater lists 42001-0053S or references a thermistor for these series, this part is the intended replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Max-E-Therm and MasterTemp families as the OEM sensor.\u003c\/li\u003e\n  \u003cli\u003eCheck your heater part label or service manual for the exact part number.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard Pentair wiring and mounting points for these models.\u003c\/li\u003e\n  \u003cli\u003eNot universal — verify model fitment before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I replace the thermistor safely and correctly?\u003c\/h3\u003e\n\u003cp\u003eReplacement typically involves powering down the heater, disconnecting the old sensor, and installing the new unit in the same mounting location with the original wiring. Follow the heater manufacturer’s service instructions for safety steps, torque values, and any calibration or reset procedures after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off power and gas supply to the heater before starting work.\u003c\/li\u003e\n  \u003cli\u003eNote or photograph wiring orientation to replicate connections.\u003c\/li\u003e\n  \u003cli\u003eInstall the new thermistor in the same port and tighten per manufacturer guidance.\u003c\/li\u003e\n  \u003cli\u003eRestore power and verify temperature readings and normal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are common signs the thermistor needs replacing?\u003c\/h3\u003e\n\u003cp\u003eSymptoms of a failing thermistor include incorrect temperature readings, heater error codes related to temperature sensing, or a heater that won’t fire even when the control calls for heat. These indicators often point to a sensor issue rather than combustion or control board faults.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnexpected heater shutdowns or persistent error codes tied to temperature sensing.\u003c\/li\u003e\n  \u003cli\u003eDisplayed water temperature doesn’t change or reads out of range.\u003c\/li\u003e\n  \u003cli\u003eHeater refuses to ignite despite correct settings and adequate water flow.\u003c\/li\u003e\n  \u003cli\u003eVisual damage, corrosion, or broken wiring at the sensor location.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OEM Pentair thermistor is intended for pool and spa owners, service technicians, and equipment installers maintaining Max-E-Therm or MasterTemp heaters who need a direct-fit, manufacturer-specified temperature sensor. Choose this part when your heater’s diagnostics or symptoms point to a defective temperature sensor and you want a straightforward replacement that matches Pentair specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this thermistor on heaters outside the Max-E-Therm or MasterTemp series?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This part is designed for Max-E-Therm and MasterTemp models; verify compatibility before using on other heaters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will replacing the thermistor require professional service?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many owners can replace it safely, but follow Pentair safety steps; hire a technician if unsure about wiring or gas\/electrical procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205041443000,"sku":"B003ONDC1Y","price":114.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-thermistor-front-view.jpg?v=1790639226"},{"product_id":"pentair-3-way-diverter-valve-2-spigot-x-1-1-2-slip-pvc-single-handle-flow-control","title":"Pentair 3-Way Diverter Valve – 2\" Spigot x 1-1\/2\" Slip PVC, Single-Handle Flow Control","description":"\u003cstrong\u003ePentair's 3-way PVC diverter valve (2\" spigot x 1-1\/2\" slip) is a compact plumbing control that routes water between multiple pool or spa lines with reliable, tool-free operation.\u003c\/strong\u003e\n\n\u003cp\u003eThis diverter valve is built for pool and spa plumbing where you need to switch flow quickly and dependably. Constructed in PVC to resist corrosion and chemical exposure, the valve lets you direct water from one inlet to either of two outlets without altering pumps or re-plumbing. Its 2\" spigot outside dimension and 1-1\/2\" slip connection provide compatibility with common pipe sizes used in residential filtration, heater, and cleaner lines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve simplify pool plumbing?\u003c\/h3\u003e\n\u003cp\u003eInstead of changing hoses or shutting down multiple components, this 3-way diverter lets you redirect flow by turning a single handle. It reduces downtime and keeps your system organized when switching between equipment like filters, heaters, and cleaners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-handle switching between two outlet lines for easy operation\u003c\/li\u003e\n  \u003cli\u003eEliminates repeated disconnects of pipes or hoses\u003c\/li\u003e\n  \u003cli\u003eCompact design fits tight spaces near pumps and filters\u003c\/li\u003e\n  \u003cli\u003eCompatible with common 1-1\/2\" and 2\" PVC plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the connection sizes and material benefits?\u003c\/h3\u003e\n\u003cp\u003eThe valve features a 2\" spigot outside and a 1-1\/2\" slip inlet\/outlet, matching standard PVC pipe sizing for most residential systems. Made from durable PVC, it resists pool chemicals and corrosion while remaining lightweight and easy to install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" spigot dimension for secure socket or adaptor fit\u003c\/li\u003e\n  \u003cli\u003e1-1\/2\" slip connection for standard PVC gluing or solvent weld\u003c\/li\u003e\n  \u003cli\u003eChemical-resistant PVC construction for long service life\u003c\/li\u003e\n  \u003cli\u003eLow-maintenance design with few moving parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain this diverter valve?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with PVC solvent-weld fittings: dry-fit, clean, apply primer and cement, then join and cure per product instructions. Maintenance is minimal—periodic handle checks and visual inspection are usually sufficient to ensure smooth operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry-fit first to confirm orientation and clearance\u003c\/li\u003e\n  \u003cli\u003eUse PVC primer and cement for leak-free joints\u003c\/li\u003e\n  \u003cli\u003eInspect handle and seals seasonally for wear\u003c\/li\u003e\n  \u003cli\u003eReplace if cracking or internal leakage is observed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool service professionals, backyard installers, and homeowners looking to add a dependable, easy-to-operate flow control to a residential pool or spa system will find this Pentair 3-way diverter valve practical and cost-effective. It suits repair jobs, equipment upgrades, or new plumbing runs where standard PVC connections are used and a simple, durable method to route water between two lines is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this diverter valve glue directly to my 1-1\/2\" PVC pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The valve has a 1-1\/2\" slip connection designed for standard PVC primer and cement solvent-welding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this valve handle pool chemical exposure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The body is molded in PVC, which resists common pool chemicals; still inspect periodically for wear or stress cracks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205267935416,"sku":"B002FQJ2ZG","price":108.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-diverter-valve-front-view.jpg?v=1790641364"},{"product_id":"pentair-freshpoint-f1b1-under-sink-water-filter-cartridge-dual-carbon-sediment-750-gallon-12-month","title":"Pentair FreshPoint F1B1 Under-Sink Water Filter Cartridge — Dual Carbon \u0026 Sediment, 750 Gallon\/12-Month","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair FreshPoint F1B1 is a single, snap-in replacement cartridge that combines carbon and sediment filtration to reduce chlorine taste, odor, and particulates for up to 750 gallons or 12 months.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe F1B1 cartridge is designed as a drop-in replacement for select Pentair FreshPoint under-sink systems. It merges an activated carbon stage with a sediment layer so you get clearer, better-tasting water without swapping multiple filters. The color-coded, click-in design simplifies maintenance: match the color, press to seat, and you’re done — no tools required. For reliable performance, follow the recommended replacement interval of 750 gallons or 12 months, whichever comes first.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cartridge improve my drinking water?\u003c\/h3\u003e\n\u003cp\u003eThe F1B1 uses dual-action filtration to address both visible particles and common taste-and-odor issues. Sediment media captures sand, rust, and larger particulates while the carbon portion adsorbs chlorine and other compounds that affect flavor and smell. The combined approach preserves water clarity and reduces the unpleasant sensory qualities that make tap water less appealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSediment layer traps particulates down to typical micron ratings for better clarity\u003c\/li\u003e\n  \u003cli\u003eActivated carbon reduces chlorine taste and odors for improved flavor\u003c\/li\u003e\n  \u003cli\u003eSingle-cartridge design handles two job types without extra plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat systems is the F1B1 compatible with and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThis replacement fits Pentair FreshPoint models 161111, 161114, and 161151. Pentair color-codes the cartridge to prevent mix-ups; installation is a simple click-in action. No wrenches or extra fittings are required, and the tool-free swap typically takes only a minute or two once the feed is shut off and lines are depressurized.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with FreshPoint systems 161111, 161114, 161151\u003c\/li\u003e\n  \u003cli\u003eColor-coded, click-in cartridge for fast, tool-free replacement\u003c\/li\u003e\n  \u003cli\u003eQuick swap procedure: shut water, depressurize, twist\/pull old, click in new\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the cartridge and what capacity does it offer?\u003c\/h3\u003e\n\u003cp\u003ePentair recommends replacing the F1B1 every 12 months or after filtering 750 gallons, whichever happens first. Actual lifespan depends on local water quality and household usage; homes with heavier sediment or higher chlorine levels may need more frequent changes. Staying on schedule helps maintain flow rate and filtration effectiveness over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated capacity: 750 gallons per cartridge under typical conditions\u003c\/li\u003e\n  \u003cli\u003eRecommended interval: replace every 12 months or when capacity is reached\u003c\/li\u003e\n  \u003cli\u003eMonitor taste, odor, and flow rate as practical indicators for earlier replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this change my system’s plumbing or require extra parts?\u003c\/h3\u003e\n\u003cp\u003eNo additional plumbing modifications are needed when replacing with the F1B1. The cartridge is designed to drop into the existing housing of compatible FreshPoint units. Because it’s a direct replacement, you won’t need adapters, extra tubing, or special tools — just follow the manufacturer’s instructions for safe cartridge changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect drop-in fit for the specified FreshPoint models\u003c\/li\u003e\n  \u003cli\u003eNo adapters or extra fittings required for installation\u003c\/li\u003e\n  \u003cli\u003eTool-free design reduces risk of installation errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair FreshPoint F1B1 is aimed at homeowners and renters with compatible FreshPoint under-sink systems who want an all-in-one replacement that tackles both visible sediment and common taste and odor complaints. It’s a practical choice for kitchens, small offices, or rental properties where quick, tool-free maintenance and reliable, better-tasting water are priorities. If you value straightforward upkeep and consistent water quality, the F1B1 provides a compact, effective filtration update for your FreshPoint system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the F1B1 compatible with my FreshPoint system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the F1B1 fits FreshPoint models 161111, 161114, and 161151 as a direct drop-in replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the F1B1 cartridge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace every 12 months or after 750 gallons of use, whichever occurs first, or sooner with heavy sediment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205303718072,"sku":"B0BC3JFDVH","price":125.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-freshpoint-f1b1-front-packaging.jpg?v=1790641687"},{"product_id":"pentair-cyanuric-acid-test-kit-r151226-79-cya-ppm-measurement-with-8-oz-reagent-clear-case","title":"Pentair Cyanuric Acid Test Kit - R151226 79, CYA ppm Measurement with 8 oz Reagent \u0026 Clear Case","description":"\u003cp\u003e\u003cstrong\u003ePentair R151226 79 Cyanuric Acid Test Kit is a ready-to-use pool water test kit that measures cyanuric acid (stabilizer) in parts per million for routine maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping cyanuric acid (CYA) within the right range helps you manage chlorine effectiveness. This compact kit from Pentair contains a test vial engineered for clear positive readouts, an 8-ounce reagent bottle, and step-by-step instructions stored in a clear-topped Styrene box so you can test pool or spa water accurately and store components safely between uses.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I perform a cyanuric acid test with this kit?\u003c\/h3\u003e\n\u003cp\u003eTesting is straightforward: collect a sample in the provided vial, add the reagent as directed, and compare the color or readout to the instruction chart. The kit’s vial design is intended to make positive visual determination easier for routine checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the included test vial sized for a precise sample volume.\u003c\/li\u003e\n  \u003cli\u003eAdd reagent from the 8-ounce bottle according to instructions.\u003c\/li\u003e\n  \u003cli\u003eRead results using the provided chart or visual cues for ppm levels.\u003c\/li\u003e\n  \u003cli\u003eStore all pieces in the clear-topped Styrene box to keep them organized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat information does the kit give me about cyanuric acid levels?\u003c\/h3\u003e\n\u003cp\u003eThe kit determines cyanuric acid concentration in parts per million, allowing you to know whether your pool’s stabilizer level is low, adequate, or high. Knowing this helps you make informed adjustments to chlorine and stabilizer management.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides a ppm measurement for cyanuric acid (CYA).\u003c\/li\u003e\n  \u003cli\u003eEnables routine monitoring of stabilizer accumulation over time.\u003c\/li\u003e\n  \u003cli\u003eHelps guide decisions about water dilution or chemical adjustments.\u003c\/li\u003e\n  \u003cli\u003eClear instructions reduce user error when interpreting results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how is the kit packaged?\u003c\/h3\u003e\n\u003cp\u003eEach pack contains one test kit with all components required for cyanuric acid testing. The parts are shipped inside a Styrene box with a transparent top so you can identify contents without opening the kit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne complete cyanuric acid test kit per pack.\u003c\/li\u003e\n  \u003cli\u003e8-ounce reagent bottle for repeated tests.\u003c\/li\u003e\n  \u003cli\u003eTest vial sized for accurate samples and positive readout design.\u003c\/li\u003e\n  \u003cli\u003eInstructions supplied and stored inside a clear Styrene box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair R151226 79 Cyanuric Acid Test Kit is designed for pool and spa owners, service technicians, and facilities managers who perform routine water quality checks and need a simple, storeable tool to measure CYA in ppm. It suits anyone who prefers manual, on-site testing with components kept together in a compact, transparent case for convenience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I test cyanuric acid with this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Test CYA every 4–6 weeks for residential pools or after heavy rain, major water additions, or large chlorine shocks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed for multiple tests?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — one kit contains the test vial, an 8-ounce reagent bottle, instructions, and a storage Styrene box for repeated use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205411557560,"sku":"B004VU8WVE","price":113.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-cyanuric-acid-test-kit-front-packaging_jpg.jpg?v=1790642873"},{"product_id":"pentair-intelliph-stenner-blue-pump-head-tubing-2-pack-oem-size-c-model-522480-replacement-tubes-for-accurate-dosing","title":"Pentair IntelliPH \/ Stenner Blue Pump Head Tubing 2-Pack (OEM Size C, Model 522480) — Replacement Tubes for Accurate Dosing","description":"\u003cp\u003e\u003cstrong\u003eReplacement pump head tubing for Pentair IntelliPH and Stenner Blue chemical pumps (OEM Size C), sold as a convenient 2-pack for reliable fit and simple upkeep.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Pentair pump head tubes (model 522480, OEM Size C) are engineered to match the original tubing used in IntelliPH and Stenner Blue dosing pumps. Supplied as a two-piece set, the tubes restore proper fluid path performance after wear, preventing leaks, drips, and inaccurate dosing associated with deteriorated tubing. The material and sizing adhere to OEM specifications so you can swap parts without reconfiguring pump settings.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this tube fits my pump?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is based on OEM Size C tubing used in Pentair IntelliPH and Stenner Blue pump heads; check your pump’s manual or the existing tube marking. If your current tubing matches the Size C designation or part number 522480, this replacement will be a direct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePart number: 522480 — OEM Size C specification\u003c\/li\u003e\n  \u003cli\u003eDesigned for Pentair IntelliPH and Stenner Blue dosing pumps\u003c\/li\u003e\n  \u003cli\u003eTwo tubes included for double service life or paired installations\u003c\/li\u003e\n  \u003cli\u003eSwap-in replacement—no pump recalibration expected\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation process?\u003c\/h3\u003e\n\u003cp\u003eReplacing the pump head tube is a straightforward task for anyone familiar with basic pump maintenance. You typically disconnect the old tubing from the pump head and fittings, trim as needed, and seat the new tube into the same ports until secure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo special tools required—use pliers if tubing is stuck\u003c\/li\u003e\n  \u003cli\u003eCut tubing to the existing length for accurate stroke action\u003c\/li\u003e\n  \u003cli\u003eInspect fittings and valves while tubing is removed\u003c\/li\u003e\n  \u003cli\u003eConfirm no leaks by running one short cycle after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eInstalling fresh OEM-size tubing restores consistent fluid flow, improves dosing accuracy, and reduces the risk of splits or pinhole leaks that develop in aged tubing. New tubes also help maintain the pump’s intended stroke volume and pressure characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMore consistent dosing with restored internal diameter\u003c\/li\u003e\n  \u003cli\u003eReduced chance of chemical exposure from cracked tubing\u003c\/li\u003e\n  \u003cli\u003eImproved pump efficiency and longer head assembly life\u003c\/li\u003e\n  \u003cli\u003eTwo tubes included for immediate spare or paired maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I care for these replacement tubes to extend life?\u003c\/h3\u003e\n\u003cp\u003eProper storage and regular inspection preserve tubing performance: keep spares sealed and away from direct sunlight, and check in-service tubes for hardening or micro-cracks. Replace tubing at the first sign of wear to prevent dosing errors or leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore unopened tubes in a cool, dry area away from UV exposure\u003c\/li\u003e\n  \u003cli\u003ePerform visual inspections monthly in demanding service conditions\u003c\/li\u003e\n  \u003cli\u003eFlush lines after changing chemicals to avoid cross-contamination\u003c\/li\u003e\n  \u003cli\u003eUse the included second tube as a ready spare to minimize downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, pool and spa operators, water treatment professionals, and facility maintenance staff who use Pentair IntelliPH or Stenner Blue dosing pumps and need an OEM-sized, drop-in tubing replacement. This 2-pack is ideal for routine preventative maintenance schedules or for keeping a spare on hand to avoid interruptions in chemical dosing operations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair 522480 tube compatible with all Stenner pumps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Stenner Blue pumps that use OEM Size C tubing; verify your pump’s tubing size or part number to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the pump head tubing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace tubing at the first signs of wear—typically annually under normal use, or more often in harsh chemical or high-cycle environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205498097848,"sku":"B071GYJ3GG","price":116.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-pump-tube-front-packaging.jpg?v=1790643659"},{"product_id":"pentair-ew22-wall-fitting-replacement-for-kreepy-krauly-legend-platinum-white-oem-compatible-restores-suction","title":"Pentair EW22 Wall Fitting Replacement for Kreepy Krauly Legend \u0026 Platinum — White OEM-compatible, Restores Suction","description":"\u003cp\u003e\u003cstrong\u003ePentair EW22 is a white wall fitting replacement designed to restore or upgrade the connection point for Kreepy Krauly Legend and Platinum automatic pool and spa cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool cleaner's wall inlet is cracked, worn, or no longer sealing properly, the EW22 wall fitting from Pentair offers a straightforward replacement that fits the Kreepy Krauly Legend and Platinum series. This OEM-compatible part provides the correct dimensions and finish to maintain a reliable vacuum connection and consistent cleaner performance without needing to replace the entire cleaning system.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the EW22 fix common wall fitting problems?\u003c\/h3\u003e\n\u003cp\u003eThe EW22 replaces damaged or leaking inlets that interrupt suction and reduce cleaning efficiency. Installing the new fitting restores a secure pathway for water flow and cleaner hose attachment so the automatic cleaner can move and operate as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for worn or cracked wall inlets\u003c\/li\u003e\n  \u003cli\u003eRestores proper suction and cleaner mobility\u003c\/li\u003e\n  \u003cli\u003eWhite finish matches most pool interiors for a discreet repair\u003c\/li\u003e\n  \u003cli\u003eCompatible with Kreepy Krauly Legend and Platinum models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the simple steps to install the Pentair EW22?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward and can be completed with basic tools and plumbing supplies. Remove the old fitting, clean mating surfaces, and secure the EW22 in place using proper sealant or retaining hardware to ensure a watertight connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShut off pool pump and drain water below the fitting level\u003c\/li\u003e\n  \u003cli\u003eRemove damaged fitting and clean the opening thoroughly\u003c\/li\u003e\n  \u003cli\u003eApply appropriate sealant or use the original retaining ring to secure EW22\u003c\/li\u003e\n  \u003cli\u003eRefill pool, test for leaks, and verify cleaner operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill EW22 work with my existing Kreepy Krauly cleaner and hoses?\u003c\/h3\u003e\n\u003cp\u003eYes—the EW22 is designed for compatibility with Kreepy Krauly Legend and Platinum series cleaners and the matching hose assemblies. Using the correct wall fitting ensures the cleaner maintains designed suction and range of motion without altering the hose configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-compatible dimensions for Legend and Platinum models\u003c\/li\u003e\n  \u003cli\u003eNo modification to hoses or cleaner required\u003c\/li\u003e\n  \u003cli\u003eHelps maintain original performance and coverage patterns\u003c\/li\u003e\n  \u003cli\u003eSimplifies repairs compared with replacing the whole cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners or service professionals who need an exact-fit replacement wall fitting for Kreepy Krauly Legend or Platinum automatic cleaners. The Pentair EW22 suits anyone looking to repair a leaking or broken inlet, preserve cleaner performance, and avoid larger system replacements. It’s also practical for maintenance shops that keep common OEM parts on hand for fast pool repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the EW22 fit Kreepy Krauly Legend and Platinum cleaners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Pentair EW22 is designed to be compatible with Kreepy Krauly Legend and Platinum automatic pool and spa cleaners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the EW22 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Basic plumbing tools and sealant are usually sufficient; shut off the pump and follow standard inlet replacement steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205529456824,"sku":"B004VU8VGK","price":95.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-ew22-front-view-wall-fitting.jpg?v=1790643981"},{"product_id":"pentair-2-way-diverter-valve-2-inch-263029-grey-black-high-flow-teflon-seal","title":"Pentair 2-Way Diverter Valve 2-Inch (263029) Grey\/Black — High-Flow, Teflon-Seal","description":"\u003cp\u003e\u003cstrong\u003ePentair 263029 is a durable 2-way diverter valve in grey\/black PVC designed to redirect pool or spa water flow with a maintenance-free Teflon-coated seal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Pentair diverter valve (model 263029) is built for pool and spa plumbing where a reliable, high-flow, two-way turning action is required. Constructed from PVC with a fiberglass-reinforced handle and a Teflon-coated diverter seal, it combines corrosion resistance and smooth operation. The valve accepts a 2-inch connection (2-1\/2-inch slip outside) and is available in both PVC and CPVC material options, making it adaptable to common circulation and plumbing needs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this diverter valve affect water flow and system performance?\u003c\/h3\u003e\n\u003cp\u003eThe 2-way configuration directs water from one inlet to one of two outlets without bypassing, preserving flow efficiency. Its design supports a high flow rate to minimize pressure drop through the plumbing. The Teflon-coated seal reduces friction and helps maintain a positive seal under typical pool and spa pressures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-flow design reduces head loss in the line\u003c\/li\u003e\n  \u003cli\u003eTeflon-coated diverter seal for smoother switching\u003c\/li\u003e\n  \u003cli\u003ePositive-seal performance to prevent leakage between ports\u003c\/li\u003e\n  \u003cli\u003eHandles typical pool circulation pressures without restriction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe valve body is molded in PVC (with CPVC as an alternative option), chosen for chemical resistance against pool sanitizers. The handle is reinforced with fiberglass, increasing torque tolerance and longevity compared with standard plastic levers. All internal components are engineered for repeated operation in pool and spa environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePVC body resists corrosion from chlorine and saltwater\u003c\/li\u003e\n  \u003cli\u003eFiberglass-reinforced handle for stronger actuation\u003c\/li\u003e\n  \u003cli\u003eTeflon-coated seal reduces wear and sticking over time\u003c\/li\u003e\n  \u003cli\u003ePrecision assembly for consistent port alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and size the Pentair 263029 correctly?\u003c\/h3\u003e\n\u003cp\u003eInstall the valve inline where a 2-inch line (with 2-1\/2-inch slip outside dimension) is required; use solvent welding or compatible fittings per local plumbing codes. Verify whether CPVC is preferable for higher-temperature applications and choose the matching material. Ensure the handle has clear access for operation and that piping is supported to avoid stress on the valve body.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2-inch piping with 2-1\/2-inch slip outside connection\u003c\/li\u003e\n  \u003cli\u003eSelect PVC or CPVC based on temperature and chemical exposure\u003c\/li\u003e\n  \u003cli\u003eUse proper solvent cement and allow cure time before pressurizing\u003c\/li\u003e\n  \u003cli\u003eSupport adjacent piping to prevent valve stress and leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance should I expect over the valve’s life?\u003c\/h3\u003e\n\u003cp\u003eThe Pentair 263029 is designed for low maintenance thanks to its Teflon-coated diverter seal that minimizes wear and sticking. Periodic inspection of the handle operation and external fittings is recommended. If service is needed, the valve’s construction allows straightforward access and replacement of the valve assembly when necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMinimal routine upkeep due to low-friction seal\u003c\/li\u003e\n  \u003cli\u003eInspect for leaks and handle wear seasonally\u003c\/li\u003e\n  \u003cli\u003eReplace valve assembly if seal or port alignment fails\u003c\/li\u003e\n  \u003cli\u003eKeep surrounding area clear to maintain easy access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool builders, service technicians, and homeowners upgrading circulation or flow-routing components will find the Pentair 263029 suitable when a robust, high-flow 2-way diverter is needed. It’s a practical choice for new installations or retrofit projects where chemical resistance, dependable sealing, and a reinforced handle matter. Choose PVC for standard pool use or CPVC if the installation requires elevated temperature tolerance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pipe size fits the Pentair 263029 diverter valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The valve fits a 2-inch connection with a 2-1\/2-inch slip outside dimension; use compatible solvent-weld fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the diverter valve resistant to pool chemicals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PVC\/CPVC construction and Teflon-coated seal provide chemical resistance suitable for typical pool and spa environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54205626056888,"sku":"B002FQJ2YM","price":125.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-diverter-valve-front-view_dfb3cf09-3546-4423-b1ab-2c7fdcc6ccbc.jpg?v=1790644713"},{"product_id":"pentair-three-port-diverter-valve-2-in-bore-2-1-2-in-od-grey-cpvc-pvc-with-teflon-seal","title":"Pentair three-port diverter valve 2 in. bore (2-1\/2 in. OD) — Grey CPVC\/PVC with Teflon seal","description":"\u003cp\u003e\u003cstrong\u003ePentair 263028 is a three-port diverter valve with a 2\" inside bore and 2-1\/2\" outside diameter, built in CPVC\/PVC for high-flow, maintenance-free fluid routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact grey diverter valve is engineered for reliable direction of liquid flow in pool, spa and light industrial plumbing systems. Manufactured from CPVC or PVC and fitted with a Teflon-coated seal, the Pentair 263028 delivers smooth operation, a positive shutoff and long service life without routine lubrication. The unit accepts standard 2\" to 2-1\/2\" PVC pipe and integrates easily with manual or automated actuator setups for flexible control schemes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve manage flow without lubrication?\u003c\/h3\u003e\n\n\u003cp\u003eThe Pentair 263028 uses a Teflon-coated diverter seal and precision-molded CPVC\/PVC components to reduce friction and resist wear. That combination produces consistent sealing performance while eliminating the need for external lubrication or frequent service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTeflon-coated seal for low-friction operation\u003c\/li\u003e\n  \u003cli\u003eSmooth internal bore designed for uninterrupted flow\u003c\/li\u003e\n  \u003cli\u003eDurable thermoplastic construction resists corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my existing 2\" PVC plumbing?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the valve’s internal bore measures 2\", with an outside diameter of 2-1\/2\" to match common 2\" PVC pipe fittings and solvent-weld connections. It’s intended to integrate with standard PVC\/CPVC piping used in pools, spas and similar systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" inside diameter for standard flow capacity\u003c\/li\u003e\n  \u003cli\u003e2-1\/2\" outside diameter aligns with common pipe sockets\u003c\/li\u003e\n  \u003cli\u003eAvailable in CPVC or PVC material options to match system chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and automate?\u003c\/h3\u003e\n\n\u003cp\u003eThe Pentair 263028 is designed for straightforward installation with solvent-weld connections and a fiberglass-reinforced handle for manual use. For automated operation, it accepts Pentair valve actuators to provide remote or timed switching without modifying plumbing layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolvent-weld compatible pipe ends for fast installation\u003c\/li\u003e\n  \u003cli\u003eFiberglass-reinforced handle improves torque and longevity\u003c\/li\u003e\n  \u003cli\u003eCompatible with Pentair actuators for fully automated control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect in daily use?\u003c\/h3\u003e\n\n\u003cp\u003eThis diverter valve delivers high flow rates with an optimum positive seal that minimizes leakage when switching ports. Its maintenance-free design and robust construction offer predictable, long-term service in typical pool, spa and light industrial environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh flow capacity for minimal pressure drop\u003c\/li\u003e\n  \u003cli\u003ePositive-seal design reduces bypass and keeps flows isolated\u003c\/li\u003e\n  \u003cli\u003eCPVC\/PVC materials provide chemical and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair 263028 three-port diverter valve is aimed at pool and spa technicians, contractors and DIYers who need a dependable, low-maintenance way to route water between lines. It’s also suitable for small-scale industrial or irrigation setups that require a compact, solvent-weld compatible diverter with optional automation. Choose the CPVC option where higher temperature or chemical resistance is required; select PVC when standard pool plumbing compatibility and cost-efficiency are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair 263028 compatible with 2\" PVC pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The valve has a 2\" internal bore and 2-1\/2\" outside diameter for standard 2\" PVC solvent-weld connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this valve require lubrication or regular maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It uses a Teflon-coated diverter seal and durable CPVC\/PVC construction for maintenance-free operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208172720312,"sku":"B00P9EOKN0","price":121.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-263028-valve-front-pipe_jpg.jpg?v=1790659049"},{"product_id":"pentair-replacement-clear-leaf-trap-for-kreepy-krauly-kreepy-kadet-r211084k-transparent-canister-with-handle","title":"Pentair Replacement Clear Leaf Trap for Kreepy Krauly \u0026 Kreepy Kadet - R211084K, Transparent Canister with Handle","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair R211084K Clear Leaf Trap with Handle is a replacement collection canister made to catch leaves and debris for Pentair Kreepy Krauly and Kreepy Kadet automatic pool and spa cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct-fit spare for popular Pentair automatic cleaners, this transparent leaf trap lets you see collected debris at a glance and removes easily thanks to an integrated handle. It replaces worn or cracked traps so your cleaner keeps operating efficiently without you having to frequently reach into the skimmer or pump basket. The clear construction helps you monitor clogging and decide when to empty, while the included handle simplifies removal for routine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my Pentair Kreepy Krauly or Kreepy Kadet cleaner?\u003c\/h3\u003e\n\u003cp\u003eThis Pentair R211084K model is manufactured to match the dimensions and fittings of many Kreepy Krauly and Kreepy Kadet automatic pool and spa cleaners. Check your cleaner’s model number and the trap’s attachment points to confirm compatibility. If your cleaner uses the same style of clear canister and handle fastening, it should install without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Pentair Kreepy Krauly series cleaners\u003c\/li\u003e\n  \u003cli\u003eWorks with Pentair Kreepy Kadet pool and spa cleaners\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design for easy swap-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the clear trap improve maintenance and performance?\u003c\/h3\u003e\n\u003cp\u003eThe transparent housing provides immediate visual feedback so you can see when debris has accumulated and needs emptying, avoiding reduced suction or blockages. Because it’s removable and includes a handle, you can quickly detach, empty, and reattach the trap without tools, reducing downtime for cleaning cycles. Regular inspection and emptying help maintain consistent water flow and cleaner efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTransparent body shows debris level instantly\u003c\/li\u003e\n  \u003cli\u003eQuick-release handle for tool-free removal\u003c\/li\u003e\n  \u003cli\u003ePrevents larger debris from reaching the pump or heater\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this replacement part?\u003c\/h3\u003e\n\u003cp\u003ePentair builds replacement traps from clear, impact-resistant plastic engineered for pool environments, including exposure to sunlight and pool chemicals. While not indestructible, the part is intended for repeated use and routine handling; avoid harsh impacts and store spare parts out of direct sun when not installed. If the trap shows cracks or clouding that impede visibility, replacement ensures continued reliable operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClear, impact-resistant plastic construction\u003c\/li\u003e\n  \u003cli\u003eChemical-resistant to standard pool sanitizers\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated removal and reinstallation via handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the R211084K leaf trap correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation usually involves removing the old trap, aligning the new trap’s inlet\/outlet connections with the cleaner’s port, and securing it in place using the built-in fastening system. The attached handle aids positioning and provides leverage during seating. Consult your cleaner’s user guide for specific steps related to hose length and clamp positions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove old trap and clean mating surfaces\u003c\/li\u003e\n  \u003cli\u003eAlign ports and seat the trap securely\u003c\/li\u003e\n  \u003cli\u003eUse the handle to position and remove for emptying\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Pool owners and service professionals using Pentair Kreepy Krauly or Kreepy Kadet automatic cleaners who need a reliable, transparent replacement trap to catch leaves and larger debris. It’s a practical spare for anyone maintaining regular pool cleaning schedules, wanting quicker visual checks and easier emptying without dismantling other equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this leaf trap a genuine Pentair part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The R211084K is an OEM Pentair replacement leaf trap designed for Kreepy Krauly and Kreepy Kadet cleaners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users can install it by hand using the built-in handle; follow your cleaner’s manual for specific alignment instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208218792120,"sku":"B0039PW7YU","price":213.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-clear-leaf-trap-front-view.jpg?v=1790659993"},{"product_id":"pentair-180-3-port-pool-spa-valve-actuator-24-vac-replacement-with-corrosion-resistant-housing","title":"Pentair 180° 3-Port Pool \u0026 Spa Valve Actuator 24-VAC Replacement with Corrosion-Resistant Housing","description":"\u003cp\u003e\u003cstrong\u003ePentair 263045 is a 180-degree replacement actuator engineered to operate 3-port pool and spa valves with reliable 24-VAC motion and corrosion-resistant housing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact actuator replaces worn or failed servos on 3-port Compool, Ortega and Jandy-style valves to restore automated flow control in pools and spas. It installs in-line with standard valve bodies and connects via the included 3-wire, 25-foot cable. Built to prevent pump dead-heading and to work with IntelliTouch control systems, the unit is UL listed and ETL recognized for compatibility and safety.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this actuator prevent pump dead-heading?\u003c\/h3\u003e\n\n\u003cp\u003eThe actuator moves valve ports through a full 180-degree arc so return and skimmer lines can be switched without restricting pump flow. By ensuring the valve reaches correct positions, the actuator reduces risk of closed or partially closed paths that can stress pumps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull 180° travel for precise port alignment\u003c\/li\u003e\n  \u003cli\u003eService switch for setting flow direction and maintenance\u003c\/li\u003e\n  \u003cli\u003eCorrosion-proof housing that resists pool chemicals\u003c\/li\u003e\n  \u003cli\u003eMaintains consistent flow patterns to protect pump life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this actuator fit my 3-port Compool, Ortega or Jandy valve?\u003c\/h3\u003e\n\n\u003cp\u003eThe 263045 is designed specifically for common 3-port valve bodies used by Compool, Ortega and many Jandy models. Fitment depends on valve shaft type and mounting orientation, so check your valve’s mounting flange and shaft connection before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with most 3-port valve shafts from listed brands\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement form for many original actuators\u003c\/li\u003e\n  \u003cli\u003eMounts to standard valve bosses with included hardware\u003c\/li\u003e\n  \u003cli\u003eMeasures 18\" L × 13\" H × 11\" W for space planning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and control features does it offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe actuator runs on 24-VAC and ships with a 3-wire, 25-foot cable for straightforward wiring to pool control systems. It is UL listed for use with IntelliTouch and is ETL recognized for safety, simplifying integration with automation panels.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e24-VAC operation compatible with common pool controllers\u003c\/li\u003e\n  \u003cli\u003e3-wire, 25-foot cable for flexible mounting locations\u003c\/li\u003e\n  \u003cli\u003eService switch to reverse flow direction during setup\u003c\/li\u003e\n  \u003cli\u003eETL recognized and UL listed for IntelliTouch compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the Pentair 263045?\u003c\/h3\u003e\n\n\u003cp\u003eThe actuator features a corrosion-proof enclosure to withstand poolside environments and chemical exposure. Its design includes a service switch for easy flow direction checks and straightforward replacement of failed units, minimizing downtime during maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant housing for long outdoor life\u003c\/li\u003e\n  \u003cli\u003eService switch simplifies commissioning and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eCompact footprint for tight equipment pad layouts\u003c\/li\u003e\n  \u003cli\u003eDesigned as a field-replaceable component to cut service time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: installers, pool technicians, and homeowners who maintain automated pool or spa plumbing and need a robust, compatible replacement actuator for 3-port valve systems. If you operate Compool, Ortega or Jandy-style valves and require reliable 180-degree travel, ETL\/UL-listed compatibility, and a corrosion-resistant enclosure with a long cable for flexible installation, the Pentair 263045 is intended to restore precise flow control with minimal fuss.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair 263045 compatible with Jandy valve systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 263045 fits many Jandy 3-port valves but confirm your valve shaft and mounting match the actuator before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What power supply does the actuator require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit operates on 24-VAC and includes a 3-wire, 25-foot cable for connection to common pool controllers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208247103672,"sku":"B004VU8Q7O","price":463.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-263045-front-view.jpg?v=1790660513"},{"product_id":"pentair-hose-assembly-for-sand-dollar-sta-rite-crystal-flo-ii-direct-replacement-leak-resistant","title":"Pentair Hose Assembly for Sand Dollar \u0026 Sta‑Rite Crystal‑Flo II — Direct Replacement, Leak‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair Hose Assembly connects Sand Dollar and Sta‑Rite Crystal‑Flo II sand filters to pumps, restoring reliable circulation and simplifying maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose assembly is engineered specifically to fit Pentair Sand Dollar and Sta‑Rite Crystal‑Flo II pool and spa sand filters. It replaces worn or damaged tubing to reestablish a secure, leak-resistant link between filter ports and the pump plumbing. Built for compatibility with the original filter models, the assembly reduces downtime and keeps water flowing through your filtration system.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly does this hose assembly do for my Sand Dollar or Crystal‑Flo II filter?\u003c\/h3\u003e\n\u003cp\u003eThe hose provides the pressure-rated pathway for water to travel between your pump and filter. It restores proper flow dynamics and stops common issues caused by cracked or collapsing hoses. Designed to match factory port sizes and angles, it helps maintain the filtration system’s intended performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Pentair Sand Dollar and Sta‑Rite Crystal‑Flo II connections\u003c\/li\u003e\n  \u003cli\u003ePressure-compatible for standard pool\/spa pump operation\u003c\/li\u003e\n  \u003cli\u003eImproves seal integrity and reduces leak risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Pentair hose assembly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the old hose, confirm port alignment, and seat the new hose onto the filter and pump fittings. Use clamps or the original fasteners to secure each end and check for leaks during a short test run. No special tools are usually required beyond basic pliers or a screwdriver for clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect power and drain pressure before replacing the hose\u003c\/li\u003e\n  \u003cli\u003eSlide hose over filter and pump spigots, then tighten clamps\u003c\/li\u003e\n  \u003cli\u003eRun a brief system test to confirm leak-free operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eWhile specific compound details are manufacturer-defined, OEM Pentair assemblies are typically made from weather- and chemical-resistant flexible tubing suitable for pool and spa environments. The construction resists cracking from UV exposure and chemical contact when used as intended, extending the operating life versus generic substitutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for pool\/spa chemicals and outdoor exposure\u003c\/li\u003e\n  \u003cli\u003eFlexible to accommodate filter\/pump alignment differences\u003c\/li\u003e\n  \u003cli\u003eMade to meet original equipment fit and functional standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my existing equipment and accessories?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is specified for Pentair Sand Dollar and Sta‑Rite Crystal‑Flo II sand filters; it matches the factory connection points and routing of those models. If your system uses different filter series or aftermarket adaptors, verify port sizes and angles before purchase. When in doubt, compare the hose length and diameter to your current part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM fit for Sand Dollar and Crystal‑Flo II filter ports\u003c\/li\u003e\n  \u003cli\u003eCheck diameter and length against your existing hose measurements\u003c\/li\u003e\n  \u003cli\u003eMay require clamp reuse or replacement for a secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: pool and spa owners, service technicians, and maintenance professionals who operate Pentair Sand Dollar or Sta‑Rite Crystal‑Flo II sand filtration systems and need a direct, reliable hose replacement. It’s ideal for anyone replacing brittle or leaking hoses to restore normal filtration and reduce water loss. Choose this assembly when you need a part matched to your filter model for straightforward installation and dependable plumbing performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with Pentair Sand Dollar filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed specifically to fit Pentair Sand Dollar and Sta‑Rite Crystal‑Flo II filter ports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the hose myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can. Basic tools like pliers or a screwdriver for clamps are typically all that’s needed; follow safety steps and test for leaks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208249528504,"sku":"B008GT7NAC","price":148.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-hose-assembly-front.jpg?v=1790660566"},{"product_id":"pentair-replacement-pool-spa-filter-lid-assembly-178561-almond-oem-fit-durable-seal","title":"Pentair Replacement Pool \u0026 Spa Filter Lid Assembly 178561 Almond — OEM fit, durable seal","description":"\u003cp\u003e\u003cstrong\u003ePentair 178561 Almond Lid Assembly is the OEM replacement top for compatible Pentair pool and spa filters, restoring a secure seal and reliable operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a cracked, warped, or missing filter lid causes leaks or prevents proper pressure maintenance, the Pentair 178561 Almond Lid Assembly replaces the top component with a factory-fit part. This almond-colored lid is built to match Pentair filter housings, providing the correct dimensions and latch points so the filter closes correctly and maintains flow. It ships as the lid assembly only — ideal for technicians, pool owners doing repairs, and service shops seeking an exact Pentair spare.\u003c\/p\u003e\n\n\u003ch3\u003eWill this lid fit my Pentair filter model?\u003c\/h3\u003e\n\n\u003cp\u003eThe 178561 lid assembly is an OEM Pentair component designed to replace the original lid on compatible Pentair pool and spa filter units. Check your filter’s model number and compare the lid diameter and latch layout to ensure compatibility. If your current lid has the same bolt pattern and sealing surface, this assembly will be a direct replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Pentair filters that match the 178561 lid dimensions and latch configuration.\u003c\/li\u003e\n  \u003cli\u003eOEM part ensures proper alignment with existing clamps and o-rings.\u003c\/li\u003e\n  \u003cli\u003eAlmond color matches many Pentair housings for a uniform look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the replacement lid?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward with basic hand tools and takes minutes for someone familiar with filter maintenance. Turn off pump power, depressurize the filter, remove the old lid, replace the o-ring if worn, and seat the new 178561 lid assembly before re-securing clamps or bolts. No permanent modifications are required, and OEM fit minimizes adjustment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools needed: screwdriver or socket for clamp bolts and a lubricated o-ring.\u003c\/li\u003e\n  \u003cli\u003eSteps: power off, relieve pressure, remove old lid, fit new lid, tighten clamps.\u003c\/li\u003e\n  \u003cli\u003eRecommended: inspect and replace the filter o-ring when installing the lid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the performance and material characteristics?\u003c\/h3\u003e\n\n\u003cp\u003eThe Pentair 178561 lid assembly is made to the manufacturer’s specifications for durability and chemical resistance suitable for pool and spa environments. It provides the sealing surface and structural support necessary to maintain filter pressure and prevent water bypass around the element. Using the OEM lid helps preserve the original flow and filtration performance of the system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed to resist pool chemicals and outdoor exposure.\u003c\/li\u003e\n  \u003cli\u003eMaintains proper pressure containment and prevents leaks.\u003c\/li\u003e\n  \u003cli\u003eMatches original Pentair tolerances for reliable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering this replacement lid?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm the part number and visually compare your current lid’s shape, latch points, and size to ensure you order the correct item. Note the lid color if appearance matters, and decide whether to replace the filter o-ring at the same time to ensure a full seal. If unsure, photograph your existing lid and consult Pentair documentation or your service provider for verification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVerify your filter model and lid bolt\/latch pattern before purchase.\u003c\/li\u003e\n  \u003cli\u003eReplace the o-ring concurrently for best sealing performance.\u003c\/li\u003e\n  \u003cli\u003eKeep the old lid until the new one is tested and the system holds pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair 178561 Almond Lid Assembly is intended for pool and spa owners, service technicians, and maintenance shops needing an exact OEM top for compatible Pentair filters. It’s best for anyone replacing a damaged or aged lid who wants a manufacturer-specified part to maintain proper sealing, preserve filtration performance, and avoid fitting issues associated with generic replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 178561 lid an original Pentair part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 178561 is a genuine OEM Pentair replacement lid assembly made to factory specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a new o-ring when installing this lid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing the o-ring is recommended to ensure a reliable seal and avoid leaks after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208265650360,"sku":"B003ANVWLA","price":302.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-178561-almond-lid-front.jpg?v=1790660974"},{"product_id":"pentair-clamp-ring-190003-for-american-products-pacfab-titan-fns-filters-tension-control-replacement","title":"Pentair Clamp Ring 190003 for American Products\/PacFab\/Titan\/FNS Filters — Tension-Control Replacement","description":"\u003cp\u003e\u003cstrong\u003eReplacement Pentair 190003 tension-control clamp ring designed to secure cartridges in American Products, PacFab, Titan and FNS pool and spa filters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Pentair clamp ring (part number 190003) is a direct-fit replacement component engineered to restore the cartridge-holding tension and sealing performance of compatible pool and spa filter housings. When the original clamp shows wear, cracking, or lost spring action, installing this replacement ring helps re-establish proper cartridge compression and alignment without replacing the entire filter assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clamp ring restore filter performance?\u003c\/h3\u003e\n\u003cp\u003eThe clamp ring provides the mechanical tension that holds the cartridge stack tightly against the filter head and manifold, ensuring an even seal and consistent flow through the media. Replacing a fatigued or damaged clamp eliminates leaks and reduces bypass that can shorten cartridge life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or broken factory clamp rings to reapply correct tension.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent unfiltered bypass by keeping cartridges aligned and sealed.\u003c\/li\u003e\n  \u003cli\u003eRestores proper cartridge compression for even water flow through media.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and systems is this Pentair part compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis 190003 clamp ring is compatible with multiple filter families made by American Products, PacFab, Titan and FNS-style cartridge systems. It's intended as a local replacement part—not a universal clamp—and fits the specific housings that originally used Pentair's tension-control design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for American Products and PacFab cartridge filter housings.\u003c\/li\u003e\n  \u003cli\u003eFits Titan-series and FNS-style cartridge stacks that use a spring-clamp assembly.\u003c\/li\u003e\n  \u003cli\u003eSold as the tension-control clamp replacement to match factory specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Pentair clamp ring safely and correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires removing the filter lid and cartridge stack, seating the replacement clamp over the cartridge assembly, and re-tensioning per the original hardware layout. Use manufacturer-recommended torque or hand-tightening guidelines and inspect the spring or fastener for proper engagement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off pump and relieve system pressure before opening the filter.\u003c\/li\u003e\n  \u003cli\u003eRemove cartridges, position new clamp ring over stack, and reassemble per original orientation.\u003c\/li\u003e\n  \u003cli\u003eCheck for even compression and a consistent seal before returning the system to service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement clamp ring for? Pool and spa owners, service technicians, and maintenance professionals who operate American Products, PacFab, Titan or FNS-style cartridge filters will find this Pentair 190003 clamp ring useful when the original tensioning component fails. It's intended for anyone seeking a cost-effective way to restore cartridge alignment and sealing without replacing the full filter head or housing. If you maintain cartridge filters and need a reliable, factory-compatible clamp to stop leaks and improve cartridge life, this is the replacement part you'd choose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair 190003 clamp ring compatible with my PacFab filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits PacFab models that originally used Pentair tension-control clamp rings and FNS-style cartridge assemblies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install this replacement clamp ring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools may be needed; always relieve pressure first and follow the filter manufacturer's reassembly instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208288260280,"sku":"B004VU8SIQ","price":490.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-clamp-ring-front-packaging.jpg?v=1790661204"},{"product_id":"pentair-thermal-regulator-kit-for-mastertemp-max-e-therm-oem-77707-0010-direct-fit-replacement-restores-temperature-control","title":"Pentair Thermal Regulator Kit for MasterTemp\/Max‑E‑Therm — OEM 77707‑0010 direct‑fit replacement, restores temperature control","description":"\u003cp\u003e\u003cstrong\u003ePentair Thermal Regulator Kit for MasterTemp\/Max‑E‑Therm is a direct-fit replacement component designed to restore proper thermal regulation in compatible Pentair pool and spa heaters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a heater’s temperature control components wear or fail, the heater can run inefficiently or shut down. This Pentair kit (part number 77707‑0010) is specified for MasterTemp and Max‑E‑Therm models and provides the factory-matched regulator parts you need to return the unit to reliable operation. It’s an OEM option intended to match the original fit and function without modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this thermal regulator kit replace or repair?\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces the thermal regulation assembly and related components that manage heater temperature behavior on compatible Pentair models. Installing the kit addresses issues caused by degraded or malfunctioning regulators and restores the heater’s intended control mechanisms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM part number 77707‑0010 specified for MasterTemp and Max‑E‑Therm heaters\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement to match original mounting and connections\u003c\/li\u003e\n  \u003cli\u003eIncludes the regulator components required for thermal control restoration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should an installer expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a technician or experienced DIYer familiar with pool heater service. Expect to remove the heater access panels, disconnect power and gas per safety protocols, swap the old regulator assembly for the new kit, and verify operation before returning the unit to normal service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic hand tools and electrical isolation of the heater\u003c\/li\u003e\n  \u003cli\u003eFollow Pentair service instructions and local codes for gas\/electrical work\u003c\/li\u003e\n  \u003cli\u003eTesting should include safe power-up and operational checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this Pentair kit work with my specific heater model?\u003c\/h3\u003e\n\u003cp\u003eThis kit is intended for Pentair MasterTemp and Max‑E‑Therm heater families; confirm compatibility by checking your heater’s model and the Pentair part number. If your unit lists 77707‑0010 or your parts manual references this regulator kit, it is the correct OEM replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your heater model plate for series and part references\u003c\/li\u003e\n  \u003cli\u003eCross-reference part number 77707‑0010 in Pentair documentation\u003c\/li\u003e\n  \u003cli\u003eContact Pentair support or a certified service pro for model confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or troubleshooting steps should follow replacement?\u003c\/h3\u003e\n\u003cp\u003eAfter installing the regulator kit, perform routine checks to confirm stable operation and eliminate previous fault symptoms. Regular visual inspections and prompt attention to warnings help maintain heater reliability and prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect wiring and connections for secure contact\u003c\/li\u003e\n  \u003cli\u003eVerify correct ignition and normal temperature response\u003c\/li\u003e\n  \u003cli\u003eSchedule periodic servicing per Pentair recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Pentair Thermal Regulator Kit is for pool and spa owners, service technicians, and maintenance professionals who need a factory‑specified replacement for MasterTemp or Max‑E‑Therm heaters. Choose this OEM kit when you require an exact-fit regulator assembly to restore heater thermal control and maintain manufacturer-compliant repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Pentair kit compatible with all MasterTemp models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits MasterTemp and Max‑E‑Therm families; confirm compatibility by checking your heater’s model plate and part number 77707‑0010.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a professional to install the regulator kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A qualified technician is recommended for safe gas and electrical handling, though experienced DIYers may install if they follow safety procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208290554040,"sku":"B004IWMJH8","price":186.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-regulator-kit-front-view.jpg?v=1790661256"},{"product_id":"pentair-lock-ring-assembly-for-american-products-warrior-pool-spa-filters-59052900-oem-durable-chemical-resistant-replacement","title":"Pentair Lock Ring Assembly for American Products Warrior Pool \u0026 Spa Filters — 59052900 OEM, Durable Chemical-Resistant Replacement","description":"\u003cp\u003e\u003cstrong\u003ePentair 59052900 Lock Ring Assembly is the OEM replacement locking ring designed to secure American Products Warrior pool and spa filter housings for reliable, leak-free operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Warrior-series filter needs a replacement ring to hold the tank and head together, this genuine Pentair lock ring restores the original fit and function. Built to resist pool chemicals and outdoor exposure, the assembly helps maintain a tight seal so filtration continues without unexpected loosening or leaks. The part is intended as a direct swap for compatible Pentair\/American Products filter models and installs quickly with basic tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this lock ring improve filter reliability?\u003c\/h3\u003e\n\u003cp\u003eThe lock ring keeps the filter tank and top securely clamped, preventing separation that can cause leaks or pressure loss. Using an OEM Pentair component ensures dimensional compatibility and reduces the chance of improper fit that aftermarket rings sometimes cause.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores factory clamping strength for consistent pressure containment\u003c\/li\u003e\n  \u003cli\u003ePrevents head-to-tank movement under pump pressure\u003c\/li\u003e\n  \u003cli\u003eReduces potential for leaks at the tank seam\u003c\/li\u003e\n  \u003cli\u003eMatches original parts for correct alignment and torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my American Products Warrior filter?\u003c\/h3\u003e\n\u003cp\u003eThis lock ring is manufactured to replace the original Pentair\/American Products component used on Warrior-series filters. Confirm compatibility by matching the part number (59052900) or consulting your filter model documentation before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Pentair\/American Products Warrior models specified by the OEM\u003c\/li\u003e\n  \u003cli\u003eCheck filter model and existing part number for exact match\u003c\/li\u003e\n  \u003cli\u003eDesigned to align with factory bolt patterns and sealing surfaces\u003c\/li\u003e\n  \u003cli\u003eIdeal when original ring is cracked, warped, or won’t hold pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most DIYers familiar with pool equipment maintenance. Typically, you need to depressurize the system, remove the filter head, install the new ring onto the tank or head, and reassemble, using the same hardware or new fasteners as required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires depressurizing the filter before disassembly\u003c\/li\u003e\n  \u003cli\u003eCommon hand tools (wrenches or ratchet) are usually sufficient\u003c\/li\u003e\n  \u003cli\u003eOEM fitment minimizes trial-and-error during reassembly\u003c\/li\u003e\n  \u003cli\u003eRefer to your filter manual for torque and reassembly sequence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability should I expect?\u003c\/h3\u003e\n\u003cp\u003ePentair builds replacement components to withstand pool chemicals, UV exposure, and seasonal temperature changes. The lock ring is constructed from durable materials selected for longevity in outdoor aquatic environments, so it resists cracking and deformation that can compromise the seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChemical-resistant construction for chlorinated and saline pools\u003c\/li\u003e\n  \u003cli\u003eUV-stable materials to prevent brittleness from sun exposure\u003c\/li\u003e\n  \u003cli\u003eEngineered for repeated service cycles without loss of clamping force\u003c\/li\u003e\n  \u003cli\u003eOEM quality control ensures consistent dimensions and strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, service technicians, and maintenance professionals using Pentair or American Products Warrior-series filters who need a reliable replacement locking ring. This part suits anyone repairing an older filter with a damaged or worn ring, or those restoring equipment to OEM specifications to preserve system integrity and avoid leaks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 59052900 lock ring an original Pentair part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 59052900 is a genuine Pentair OEM replacement designed for compatible Warrior-series filters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this lock ring myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Basic tools and depressurizing the filter are required; follow your filter manual for safe reassembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208308805816,"sku":"B002NJIK12","price":200.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-lock-ring-front-view.jpg?v=1790661421"},{"product_id":"pentair-cnc-plus-420-replacement-filter-cartridges-4-pack-oem-pleated-media-tool-free-install","title":"Pentair CNC Plus 420 Replacement Filter Cartridges — 4-Pack OEM Pleated Media, Tool-Free Install","description":"\u003cp\u003e\u003cstrong\u003ePentair Pleetco CNC Plus 420 Cartridge 4-Pack is a set of genuine OEM replacement filter cartridges made to restore reliable filtration performance in CNC Plus 420 systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four authentic Pentair replacement cartridges are manufactured to match the original specifications of CNC Plus 420 filter housings, giving you consistent water flow and long-lasting filtration without guesswork. Because they’re made by Pentair, the fit, material quality, and filtration characteristics align with the OEM design so you can swap cartridges quickly and keep pools, equipment, or water systems running as designed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these replacement cartridges maintain filtration performance?\u003c\/h3\u003e\n\u003cp\u003eThe CNC Plus 420 cartridges use the same pleated media and construction as the original Pentair parts, restoring the capture area and flow characteristics your system was engineered for. Replacing worn cartridges keeps pressure drops and backwash cycles predictable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuthentic pleated filter media matched to CNC Plus 420 specifications\u003c\/li\u003e\n\u003cli\u003eConsistent flow and pressure performance after replacement\u003c\/li\u003e\n\u003cli\u003eFour cartridges provide enough swaps for scheduled maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and service the cartridges?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the used cartridge, rinse or inspect the housing, and drop in the new Pentair cartridge—no special tools required. Regular visual checks and simple rinsing during service keep cartridges performing between full replacements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTool-free cartridge removal and insertion for quick service\u003c\/li\u003e\n\u003cli\u003eMatches OEM dimensions to ensure a sealed fit\u003c\/li\u003e\n\u003cli\u003eIdeal for routine maintenance cycles and quick swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat value does the 4-pack offer compared with single cartridges?\u003c\/h3\u003e\n\u003cp\u003eThe four-pack delivers cost savings and convenience—buying multiple cartridges together reduces per-cartridge cost and ensures you have spares on hand for predictable maintenance intervals. It’s a practical choice for owners who prefer to keep replacements ready and avoid downtime.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower unit price versus purchasing individually\u003c\/li\u003e\n\u003cli\u003eEnough supply for multiple replacement cycles or multiple units\u003c\/li\u003e\n\u003cli\u003eReduces ordering frequency and simplifies inventory management\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich systems and users benefit most from these Pentair cartridges?\u003c\/h3\u003e\n\u003cp\u003eThese cartridges are designed specifically for Pentair Pleetco CNC Plus 420 filter systems and are suited to anyone maintaining that model—homeowners, pool technicians, and facility managers. Because they are OEM parts, they’re the straightforward choice when you want to preserve original system performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect fit for CNC Plus 420 filter housings by Pentair\u003c\/li\u003e\n\u003cli\u003eRecommended for scheduled maintenance and mid-season replacements\u003c\/li\u003e\n\u003cli\u003eUseful for property maintenance crews and service professionals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own or service a Pentair Pleetco CNC Plus 420 filtration system and prefer genuine OEM parts to preserve specification, this 4-pack provides a reliable, cost-effective supply of replacement cartridges. It’s ideal for users who value correct fit, dependable filtration characteristics, and reduced maintenance disruptions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these cartridges genuine Pentair replacement parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These are authentic Pentair Pleetco CNC Plus 420 OEM replacement cartridges manufactured to original specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace a CNC Plus 420 cartridge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacement frequency depends on use and water conditions; many users replace cartridges seasonally or when flow and pressure indicate reduced performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208309952696,"sku":"B08N2X7BDH","price":623.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-cnc-plus-420-front-packaging.jpg?v=1790661448"},{"product_id":"pentair-multiport-valve-for-triton-quad-d-e-filters-2-side-mount-7-5-centerline-6-position-durable-handle","title":"Pentair Multiport Valve for Triton \u0026 Quad D.E. Filters — 2\" Side-Mount, 7.5\" Centerline, 6-Position Durable Handle","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair 261055 is a 2-inch side-mount multiport valve engineered to manage filtration cycles for Triton and Quad D.E. pool filters with a 7½-inch centerline.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis durable multiport valve replaces or upgrades the control assembly on compatible Pentair D.E. filters, providing reliable positions for filtering, backwashing, rinsing, recirculating, wasting and shutting off flow. Built with easy-install bulkhead union couplers and a one-piece handle, the valve simplifies maintenance and reduces downtime so pool systems run cleaner with less fuss.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 261055 make pool maintenance easier?\u003c\/h3\u003e\n\u003cp\u003eThe 261055 centralizes common plumbing functions into a single valve body so you can switch modes quickly without tools. Its one-piece handle offers positive detents for each function, minimizing mispositioning. The 2-inch bulkhead union couplers speed installation and allow straightforward removal for service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix clear positions: Filter, Backwash, Rinse, Recirculate, Waste, Closed\u003c\/li\u003e\n  \u003cli\u003eOne-piece ergonomic handle for secure, single-handed operation\u003c\/li\u003e\n  \u003cli\u003e2\" union couplers reduce fittings and leak points during install\u003c\/li\u003e\n  \u003cli\u003eSide-mount configuration fits Triton and Quad filter housings with 7.5\" centerline\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this valve fit my Triton or Quad D.E. filter?\u003c\/h3\u003e\n\u003cp\u003eThis valve is designed specifically for Pentair Triton and Quad D.E. filters that accept a 2-inch side-mount assembly and have a 7½-inch centerline measurement. Confirm the centerline distance and thread\/unions on your existing valve before ordering. If dimensions match, the 261055 is a direct fit and replacement for the factory valve.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecifically for Pentair Triton and Quad D.E. models\u003c\/li\u003e\n  \u003cli\u003e2\" side-mount with 7.5\" centerline — measure your tank to verify fit\u003c\/li\u003e\n  \u003cli\u003eCompatible with pool plumbing using 2\" unions or adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features improve durability and performance?\u003c\/h3\u003e\n\u003cp\u003eThe valve body and handle are molded from robust, UV-resistant plastics formulated for pool chemical exposure and outdoor conditions. Internal seals and ports are engineered to maintain tight shutoff under pressure and repeated cycling. The design reduces leaks and extends the service life of the filtration system when installed and maintained correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV and chemical-resistant construction for outdoor use\u003c\/li\u003e\n  \u003cli\u003ePrecision ports and seals to limit bypass and leakage\u003c\/li\u003e\n  \u003cli\u003eRugged handle and detents for long-term mechanical reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the 261055 multiport valve?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires matching the 7.5\" centerline and connecting the 2\" bulkhead unions to your existing plumbing or adapters. Shut pump power, relieve system pressure, and follow Pentair installation guidance for sequence and sealant use. Routine checks for tightened unions and intact seals will keep the valve operating smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off pump and relieve pressure before replacing valve\u003c\/li\u003e\n  \u003cli\u003eUse included or compatible 2\" unions for leak-free connections\u003c\/li\u003e\n  \u003cli\u003eInspect O-rings and seals annually and replace if worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair 261055 multiport valve is intended for pool owners, service technicians, and contractors who operate or maintain Pentair Triton or Quad D.E. filtration systems and need a dependable, serviceable 2-inch side-mount valve with a 7½-inch centerline. Choose this part when you require clear mode selection, simplified plumbing connections, and a robust replacement component to restore proper filtration and backwash functions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this valve fit all Triton and Quad models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Triton and Quad D.E. filters that use a 2\" side-mount valve with a 7.5\" centerline; verify your tank's centerline before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the 261055 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you shut off power, relieve pressure, and have basic plumbing skills; use the 2\" unions for secure connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208311853240,"sku":"B001F6PFJ4","price":526.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-261055-front-view.jpg?v=1790661468"},{"product_id":"pentair-globrite-led-pool-light-602055-100-ft-cord-energy-efficient-underwater-illumination","title":"Pentair Globrite LED Pool Light 602055 — 100 ft Cord, Energy‑Efficient Underwater Illumination","description":"\u003cp\u003e\u003cstrong\u003ePentair Globrite 602055 is a ready-to-install underwater LED pool light with a 100-foot power cord designed to upgrade pool ambiance while using less energy than traditional incandescent fixtures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Pentair Globrite 602055 brings long-reaching, low-maintenance illumination to residential pools. Built for durability and simple installation, this unit arrives fully assembled so you can replace an existing light or add dramatic color and clarity to evening swims. Its 100-foot cord gives flexibility for mounting and power access without the need for immediate rewiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Pentair Globrite improve evening pool use?\u003c\/h3\u003e\n\u003cp\u003eThe Globrite enhances visibility and creates a safer, more inviting nighttime atmosphere without high operating costs. Its LED-based design provides bright, consistent light and reduces the frequency of lamp replacement. The light produces vivid color and clear white illumination options suitable for social gatherings or quiet evenings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBright LED output for clearer pool visibility at night\u003c\/li\u003e\n  \u003cli\u003eLong 100-foot cord for flexible placement and easier hookup\u003c\/li\u003e\n  \u003cli\u003eColor and white light options to set mood or aid visibility\u003c\/li\u003e\n  \u003cli\u003eLower heat output than incandescent fixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation complicated and what do I need to know?\u003c\/h3\u003e\n\u003cp\u003eThe 602055 comes fully assembled, which streamlines the installation process compared with fixtures that require field assembly. Most owners swap out an existing underwater light niche using standard pool electrical practices; however, professional installation is recommended for safety and code compliance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo assembly required—arrives ready to install\u003c\/li\u003e\n  \u003cli\u003e100-foot cord reduces need for immediate electrical relocation\u003c\/li\u003e\n  \u003cli\u003eCompatible with common 1-1\/2\" pool conduit setups when installed per local code\u003c\/li\u003e\n  \u003cli\u003eProfessional electrician recommended for sealed underwater connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and efficiency advantages of this model?\u003c\/h3\u003e\n\u003cp\u003ePentair designs the Globrite with long service life and energy savings in mind. The LED technology consumes less power than legacy bulbs, producing comparable or better light while reducing runtime costs. The sealed housing and materials resist pool chemicals and water intrusion when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnergy-efficient LED operation for lower electricity use\u003c\/li\u003e\n  \u003cli\u003eSealed fixture construction for underwater durability\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance due to longer LED lifespan\u003c\/li\u003e\n  \u003cli\u003eReliable performance intended for pool and spa environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair Globrite 602055 is aimed at homeowners and pool professionals who want an easy-to-install, energy-efficient underwater lighting solution with a long cord for flexible power placement. It suits anyone upgrading old incandescent lights, adding nighttime curb appeal, or improving pool visibility for evening swims. If you need a dependable, low-maintenance light with straightforward installation and a 100-foot cord for reach, this model is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Globrite 602055 require assembly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the unit ships fully assembled so you can install it without field assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the light myself with the 100-foot cord?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The long cord helps positioning, but hire a licensed electrician for underwater electrical connections to meet safety codes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208329384120,"sku":"B00E4QB6WM","price":1026.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-globrite-front-view.jpg?v=1790661775"},{"product_id":"pentair-520272-pool-spa-air-water-solar-temperature-sensor-20ft-cable-oem-replacement","title":"Pentair 520272 Pool \u0026 Spa Air\/Water\/Solar Temperature Sensor — 20ft Cable OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003ePentair 520272 is an OEM air, water, and solar temperature sensor with a 20-foot cable designed to replace a failing sensor in pool, spa, or solar control systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pool or spa automation is reporting incorrect temperatures or a sensor fault, this genuine Pentair replacement restores accurate readings for pumps, heaters, and solar controllers. The 520272 sensor supports air, water and solar temperature monitoring and includes a long 20-foot lead so you can position it where you need reliable data without adding extensions. Built to integrate with Pentair control systems, it helps maintain consistent operation by supplying the controller with correct temperature inputs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor fit into my pool or spa automation?\u003c\/h3\u003e\n\u003cp\u003eThe Pentair 520272 plugs into compatible Pentair automation panels and controllers, replacing OEM sensors without altering system programming. It communicates temperature readings to your controller so the system can make decisions for heating, cooling, or pump cycles. Installation is straightforward for anyone familiar with basic pool equipment wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM fit for Pentair-compatible control boards and modules\u003c\/li\u003e\n  \u003cli\u003e20-foot cable for flexible mounting and neat cable routing\u003c\/li\u003e\n  \u003cli\u003eWorks for monitoring air, water, or solar panel temperatures\u003c\/li\u003e\n  \u003cli\u003eNo special calibration required in most systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key benefits of choosing this genuine Pentair replacement?\u003c\/h3\u003e\n\u003cp\u003eUsing an original Pentair sensor ensures signal compatibility and avoids the guesswork of third-party parts. Genuine components match the electrical specifications and connector types expected by Pentair controllers, which reduces troubleshooting time. The extended cable length gives you more placement options for accurate environmental or fluid readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM assurance for compatibility and electrical match\u003c\/li\u003e\n  \u003cli\u003eLong 20-foot lead for convenient sensor placement\u003c\/li\u003e\n  \u003cli\u003eDesigned for durable service in pool and solar environments\u003c\/li\u003e\n  \u003cli\u003eEliminates error codes caused by mismatched third-party sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Pentair 520272 safely and correctly?\u003c\/h3\u003e\n\u003cp\u003eTurn off power to the controller before disconnecting the old sensor to prevent damage. Route the 20-foot cable to the intended measurement point—air, water, or solar panel surface—secure the sensor, and attach the connector to the controller’s sensor port. Restore power and confirm the controller recognizes the new sensor by checking display readings or status messages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower down control panel before swapping sensors\u003c\/li\u003e\n  \u003cli\u003ePlace sensor in the correct medium: air, immersed in water, or against a solar surface\u003c\/li\u003e\n  \u003cli\u003eUse strain relief or clips to protect the cable from wear\u003c\/li\u003e\n  \u003cli\u003eVerify readings on your automation display after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this sensor resist poolside conditions and wiring runs?\u003c\/h3\u003e\n\u003cp\u003eThe 520272 is built for the environmental challenges around pools and solar installations, with a long cable that helps keep controllers and connections dry and sheltered. While the sensor is rugged for typical outdoor use, route and secure the cable to reduce exposure to mechanical damage and UV where possible. Follow local regulations for wiring and conduit if running cable near electrical equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for outdoor pool, spa, and solar monitoring\u003c\/li\u003e\n  \u003cli\u003e20-foot cable allows safer, dryer controller placement\u003c\/li\u003e\n  \u003cli\u003eUse conduit or clips to minimize physical and UV stress\u003c\/li\u003e\n  \u003cli\u003eCheck local codes for wiring practices around pools and equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this part for: Pool service professionals, equipment installers, and DIYers maintaining Pentair automation systems who need a reliable OEM temperature sensor replacement. If your Pentair control reports temperature errors, you want a direct-fit part that preserves system reliability and avoids compatibility headaches—this Pentair 520272 sensor with its 20-foot cable is designed for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair 520272 compatible with my Pentair control system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's an OEM replacement designed for Pentair automation panels that accept the model 520272 sensor connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the 520272 for both air and water temperature readings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sensor supports air, water, and solar temperature monitoring when installed in the correct location.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208330137784,"sku":"B001DO18FS","price":161.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-520272-sensor-front-view.jpg?v=1790661787"},{"product_id":"pentair-2-inch-threaded-multiport-valve-replacement-for-fns-nautilus-six-position-pvc-positive-lock","title":"Pentair 2-Inch Threaded Multiport Valve Replacement for FNS\/Nautilus – Six-Position PVC Positive-Lock","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair 261152 is a 2-inch threaded multiport replacement valve engineered to restore reliable six-position control to Pentair FNS, FNS Plus and Nautilus Plus D.E. pool and spa filters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Diatomaceous Earth (D.E.) filter is losing suction control, leaking, or stuck between settings, swapping in this Pentair threaded multiport valve returns full functionality without replacing the entire filter. Built with a durable PVC body and a positive-lock selector, the 261152 fits directly onto Pentair FNS-series and Nautilus Plus housings to manage normal filtration, backwash, rinse, waste, closed, and winterizing duties.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this valve fix my filter operation?\u003c\/h3\u003e\n\u003cp\u003eInstalling the Pentair 261152 replaces worn or damaged valve internals and the selector assembly, restoring precise flow routing through standard multiport positions. The positive-lock mechanism ensures each setting snaps into place to prevent accidental misalignment during pump start-up or service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit thread size: 2-inch threaded connection for compatible Pentair D.E. filters\u003c\/li\u003e\n  \u003cli\u003eReplaces failing selector stems and internal seals to stop leaks\u003c\/li\u003e\n  \u003cli\u003eSix-position control returns normal filtration and backwash cycles\u003c\/li\u003e\n  \u003cli\u003ePositive-lock action reduces risk of user error during switching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it simple to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eYes — the valve is designed for straightforward replacement with common pool tools. Basic steps include depressurizing the filter, removing the old valve, inspecting O-rings and the filter's top port, then threading the new valve into place and testing each position under short pump runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePVC construction keeps the unit lightweight and corrosion-resistant\u003c\/li\u003e\n  \u003cli\u003eNo specialty tooling required for most standard installations\u003c\/li\u003e\n  \u003cli\u003eRegularly check and lubricate O-rings for best sealing performance\u003c\/li\u003e\n  \u003cli\u003eWinterizing position simplifies off-season protection procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filter models and situations is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe 261152 is intended specifically for Pentair FNS, FNS Plus and Nautilus Plus D.E. filter models that accept a 2-inch threaded multiport valve. It’s the right choice when the original valve is cracked, leaking, or the selector won’t hold a chosen position, and as a preventive replacement for aging installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatches Pentair FNS-series D.E. filter housings\u003c\/li\u003e\n  \u003cli\u003eDesigned for Nautilus Plus D.E. filter models\u003c\/li\u003e\n  \u003cli\u003eIdeal for aged valves showing wear, leaks, or sticky selector action\u003c\/li\u003e\n  \u003cli\u003eUseful spare for pool service technicians and seasonal maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners and service professionals who maintain Pentair D.E. filters and want a reliable, direct-fit replacement valve will benefit from the 261152. It’s especially suited to anyone needing an easy, long-lasting fix for lost suction control, leaking valve ports, or broken selector mechanisms on FNS and Nautilus Plus systems. The PVC construction and positive-lock feature make it practical for routine swapping, preventive maintenance, or repair jobs where restoring six-position functionality quickly is the priority.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this valve fit my Pentair Nautilus Plus filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 261152 is compatible with Nautilus Plus D.E. filters that accept a 2-inch threaded multiport valve.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the valve include internal seals or O-rings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit installs with standard seals; inspect and replace O-rings during installation for best leak-free performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208350027960,"sku":"B001F6S9TC","price":526.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-261152-front-view.jpg?v=1790662123"},{"product_id":"pentair-freshpoint-carbon-replacement-filters-set-of-2-675-gal-capacity-pfas-reduction","title":"Pentair FreshPoint Carbon Replacement Filters, Set of 2 — 675‑Gal Capacity, PFAS Reduction","description":"\u003cp\u003e\u003cstrong\u003ePentair FreshPoint F2B1\/F2B2 replacement cartridges are a twin-pack of carbon filters designed to restore under-sink FreshPoint systems, offering up to 675 gallons of certified filtration per set.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two carbon cartridges are made to click into Pentair FreshPoint two-stage systems (and are compatible with certain three-stage and reverse osmosis setups) so you can keep delivering clean, better-tasting water from your dedicated faucet. The cartridges are color-coded for correct placement and engineered for straightforward annual replacement, helping maintain performance and flow.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these cartridges improve the taste and clarity of my drinking water?\u003c\/h3\u003e\n\u003cp\u003eThe activated carbon in these replacement cartridges adsorbs chlorine and many organic compounds that cause off-flavors and odors. When installed in the appropriate FreshPoint configuration, they also work alongside other stages to trap particulates and reduce visible cloudiness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon media targets chlorine taste and odor for cleaner flavor.\u003c\/li\u003e\n  \u003cli\u003e0.5 micron rated stages help lower suspended particles and microplastics.\u003c\/li\u003e\n  \u003cli\u003eColor-coded design ensures correct filter order for consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these filters reduce PFAS, lead, or other contaminants?\u003c\/h3\u003e\n\u003cp\u003eWhen used in a FreshPoint two-stage system, independent laboratories have certified this configuration to significantly reduce total PFAS, including PFOA and PFOS. The system is also tested to address other contaminants such as lead, select pesticides, and cysts when the full certified setup is installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCertified to reduce up to 99.7% total PFAS (when installed as tested).\u003c\/li\u003e\n  \u003cli\u003eTested to NSF\/ANSI Standards 42, 53, and 401 for a range of common contaminants.\u003c\/li\u003e\n  \u003cli\u003eWorks in tandem with other FreshPoint stages and RO systems for broader removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long do the replacement cartridges last and how do I know when to change them?\u003c\/h3\u003e\n\u003cp\u003eEach twin pack provides up to 675 gallons of treated water, which typically equals about one year of use depending on household size and water quality. Replace the cartridges annually or sooner if you notice a steady drop in flow rate or a return of taste or odor issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e675-gallon capacity per set—approximate one-year service life.\u003c\/li\u003e\n  \u003cli\u003eMonitor faucet flow and water taste; reduced flow signals replacement need.\u003c\/li\u003e\n  \u003cli\u003eSimple click-in installation makes annual swaps quick and tool-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich FreshPoint systems are compatible with these cartridges?\u003c\/h3\u003e\n\u003cp\u003eThis twin pack fits specific Pentair FreshPoint under-sink models and can also be used in compatible three-stage or reverse osmosis setups that share the same cartridge form factor. Verify your system model to ensure proper fit and certified performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for FreshPoint models: 161112, 161152, 158854, 158853, 158840, 158839, 158837.\u003c\/li\u003e\n  \u003cli\u003eColor-coded cartridges help maintain correct stage sequence during replacement.\u003c\/li\u003e\n  \u003cli\u003eCompatible with some FreshPoint three-stage and RO systems using the same cartridge type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners or renters with a Pentair FreshPoint under-sink drinking water system who want an easy-to-install replacement solution that keeps their system performing to certified levels. These cartridges suit households prioritizing improved taste, reduced chlorine and targeted contaminant reduction, and straightforward annual upkeep without specialized tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the Pentair FreshPoint F2B1\/F2B2 cartridges?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace annually or sooner—each set treats about 675 gallons; change when flow decreases or taste returns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these cartridges fit my FreshPoint system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit FreshPoint models 161112, 161152, 158854, 158853, 158840, 158839, and 158837; check your model number to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208401408184,"sku":"B0BC2LZ2J6","price":215.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-freshpoint-front-packaging.jpg?v=1790662808"},{"product_id":"pentair-vac-mate-r211100-multi-function-skimmer-attachment-universal-fit-continuous-surface-skimming","title":"Pentair Vac-Mate R211100 multi-function skimmer attachment — universal fit, continuous surface skimming","description":"\u003cb\u003ePentair R211100 Vac-Mate is a multi-function skimmer attachment that lets a suction-side pool cleaner run while the skimmer continuously traps surface debris in the basket.\u003c\/b\u003e\n\nThe Vac-Mate installs in most skimmer control mechanisms so you can run an automatic suction cleaner without sacrificing surface skimming. Instead of switching between cleaner and skimmer settings, this single, easy-to-adjust attachment maintains both functions simultaneously, reducing strain on the pump and keeping leaves, bugs, and floating debris out of the pump pot.\n\n\u003ch3\u003eHow does the Vac-Mate let my skimmer and suction cleaner run together?\u003c\/h3\u003e\n\u003cp\u003eThe Vac-Mate replaces the typical control mechanism and adds a simple handle setting that balances flow between the cleaner line and the skimmer throat. This preserves skimming action while directing enough suction to operate a cleaner, avoiding the need to toggle controls manually.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits most standard skimmer control housings for quick replacement.\u003c\/li\u003e\n  \u003cli\u003eSingle-handle setting controls suction distribution between skimmer and cleaner.\u003c\/li\u003e\n  \u003cli\u003eMaintains continuous surface skimming during cleaner operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat debris does the Vac-Mate capture before it reaches the pump?\u003c\/h3\u003e\n\u003cp\u003eThe Vac-Mate routes surface debris into the skimmer basket, preventing leaves and larger particles from entering the pump pot and plumbing. Trapping debris at the skimmer reduces clogging and lowers maintenance time for the pump strainer basket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCatches leaves, twigs, insects and floating debris in the skimmer basket.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent large debris from reaching and obstructing the pump pot.\u003c\/li\u003e\n  \u003cli\u003eProtects downstream plumbing and extends intervals between deep cleanings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Vac-Mate work with my existing suction-side cleaner and skimmer?\u003c\/h3\u003e\n\u003cp\u003eYes — the R211100 is designed to replace the control mechanisms supplied with most suction-side cleaners and to adapt to common skimmer setups. It's a universal solution that converts many manual-control systems into a fully automatic combination skimmer and cleaner control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces most factory-supplied cleaner control devices for wide compatibility.\u003c\/li\u003e\n  \u003cli\u003eMakes many suction-side cleaners and skimmer-equipped systems operate automatically.\u003c\/li\u003e\n  \u003cli\u003eSimple retrofit often requires only basic tools for installation in the skimmer throat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nPool owners and maintenance professionals who want continuous surface skimming while running a suction-side cleaner will benefit from the Pentair R211100 Vac-Mate. It’s ideal for backyard pools with recurring leaf or insect debris, service technicians retrofitting older skimmers, and anyone who prefers fewer manual adjustments and less strain on pump plumbing. By trapping debris in the skimmer basket and keeping the cleaner working automatically, the Vac-Mate helps simplify routine pool care and protect equipment without changing your cleaner, pump, or filter.\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Vac-Mate be installed without replacing my current cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Vac-Mate replaces most control mechanisms and lets your existing suction-side cleaner run while skimming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will using the Vac-Mate harm my pump or reduce suction cleaner performance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It balances suction so the cleaner runs effectively while keeping surface skimming, without overloading the pump.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208486441144,"sku":"B004MCH1SG","price":216.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-vac-mate-front-assembly.jpg?v=1790663994"},{"product_id":"pentair-e10-back-up-valve-replacement-for-kreepy-krauly-legend-platinum-white-oem-restores-pulse-timing","title":"Pentair E10 Back-Up Valve Replacement for Kreepy Krauly Legend \u0026 Platinum — White OEM, Restores Pulse Timing","description":"\u003cp\u003e\u003cstrong\u003eThe Pentair E10 white back-up valve is a direct replacement part that restores reliable flow control for Kreepy Krauly Legend and Platinum automatic pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Kreepy Krauly cleaner is stalling, cycling improperly, or losing suction, the back-up valve is a common wear item that regulates water flow and timing. This genuine Pentair replacement is molded in durable white plastic to match the original equipment and is designed for quick installation. It helps return your cleaner to consistent performance without needing a full unit replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this replacement valve fix my automatic pool cleaner?\u003c\/h3\u003e\n\u003cp\u003eThe valve controls internal water pathways and timing pulses that drive the cleaner’s motion. When the valve is worn, cracked, or clogged, the cleaner can behave erratically; swapping in the E10 restores the original flow pattern. Installation typically eliminates irregular cycling and improves suction consistency so the cleaner can cover pool surfaces as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit part for Kreepy Krauly Legend and Platinum models\u003c\/li\u003e\n  \u003cli\u003eRestores correct pulse timing and steering behavior\u003c\/li\u003e\n  \u003cli\u003eReduces stalls and improves suction balance across the unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to install the Pentair E10 back-up valve?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and usually requires only basic tools and a few minutes of time. You’ll remove the cleaner’s housing access panel, swap the old valve for the E10, and reseal the housing. No special adhesives or plumbing changes are necessary if you replace like-for-like.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple hand tools (screwdriver or nut driver) for access\u003c\/li\u003e\n  \u003cli\u003eNo plumbing modifications—fits original valve cavity\u003c\/li\u003e\n  \u003cli\u003eFollow model-specific manufacturer instructions for reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part last and is it worth replacing versus buying a new cleaner?\u003c\/h3\u003e\n\u003cp\u003eThe E10 is manufactured to Pentair’s OEM standards and is intended to match the lifespan of the original factory part under normal use. Replacing a failed valve is far more economical than purchasing a new automatic cleaner, and it targets the most common failure point in aged units. Pentair also backs the part with a 60-day warranty for added confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-grade material designed for pool environment durability\u003c\/li\u003e\n  \u003cli\u003eCost-effective repair compared to full-unit replacement\u003c\/li\u003e\n  \u003cli\u003eIncludes a 60-day warranty from Pentair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I tell if the back-up valve is the problem, not another component?\u003c\/h3\u003e\n\u003cp\u003eCommon symptoms of a failing back-up valve include irregular or halted movement, uneven suction, and frequent cycling that doesn’t match the usual pattern. Visual inspection can reveal cracks, deformation, or debris buildup on the valve surface. If symptoms match these signs and other components (hose, flapper, diaphragm) appear intact, the valve is a likely root cause.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLook for cracking, hardening, or stuck parts on the valve\u003c\/li\u003e\n  \u003cli\u003eTest movement after temporarily cleaning the valve area\u003c\/li\u003e\n  \u003cli\u003eIf problems persist after cleaning, replace the valve as next step\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair E10 white back-up valve is designed for pool owners and service technicians who maintain Kreepy Krauly Legend or Platinum automatic cleaners and want a quick, original-equipment repair. It suits anyone seeking a budget-friendly way to restore reliable cleaning performance without replacing the entire unit, and it’s especially useful for older cleaners showing timing or suction issues.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Pentair E10 compatible with Kreepy Krauly Legend and Platinum models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The E10 is a direct replacement made to fit Kreepy Krauly Legend and Platinum automatic pool cleaners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this valve come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Pentair includes a 60-day warranty with this replacement back-up valve.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208592478392,"sku":"B001ECJT28","price":208.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-e10-back-up-valve-front-view.jpg?v=1790665702"},{"product_id":"pentair-superflo-high-performance-pool-pump-1hp-ec-quiet-high-service-motor-unionized-fittings","title":"Pentair SuperFlo High Performance Pool Pump 1HP EC — Quiet, High-Service Motor, Unionized Fittings","description":"\u003cp\u003e\u003cstrong\u003ePentair SuperFlo High Performance Pumps 1HP EC is a compact, high-service-factor pool pump engineered for quiet, dependable circulation and easy installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for residential and light-commercial pool systems, the SuperFlo 1HP EC blends a heavy-duty motor and hydraulic refinements to deliver steady flow with reduced noise. Its unionized fittings and user-friendly lid simplify plumbing and routine maintenance, while the integral volute and pot reduce turbulence for smoother operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SuperFlo 1HP EC reduce noise compared with standard pumps?\u003c\/h3\u003e\n\n\u003cp\u003eThis model uses an integral volute and pot that help streamline water movement and lower hydraulic noise. Coupled with a heavy-duty 56 square flange motor and careful internal design, the pump operates with noticeably less sound during normal circulation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIntegral volute and pump pot for reduced turbulence and quieter flow\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty, high-service-factor motor that runs smoothly under load\u003c\/li\u003e\n  \u003cli\u003eCam and Ramp™ lid helps seal and dampen vibration at the strainer housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat plumbing connections and installation features come with this pump?\u003c\/h3\u003e\n\n\u003cp\u003eThe SuperFlo 1HP EC includes unionized fittings that accommodate common pool plumbing sizes and simplify removal for service. The unit ships with both 1-1\/2 inch internal slip and 2 inch external slip connections to match typical suction and return lines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUnionized fittings included for fast, tool-minimal installation\u003c\/li\u003e\n  \u003cli\u003e1-1\/2 in. internal slip and 2 in. external slip for flexible plumbing options\u003c\/li\u003e\n  \u003cli\u003eCam and Ramp™ lid for easy access to the strainer basket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and motor characteristics should I expect?\u003c\/h3\u003e\n\n\u003cp\u003ePentair built the SuperFlo around a heavy-duty 56 square flange motor with a high service factor, meaning it’s rated to handle continuous pool circulation demands. The robust motor construction and materials ensure long-term reliability when installed and maintained according to manufacturer guidelines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e56 square flange motor design for stable mounting and alignment\u003c\/li\u003e\n  \u003cli\u003eHigh service factor for consistent performance under sustained load\u003c\/li\u003e\n  \u003cli\u003eRugged housing and internal components for routine pool use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is maintenance and routine service?\u003c\/h3\u003e\n\n\u003cp\u003eMaintenance is straightforward thanks to the Cam and Ramp™ lid and included unionized fittings that let you access the strainer basket or remove the pump without disturbing plumbing. The clear pathways and union connections make cleaning and part replacement faster and less invasive.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCam and Ramp™ lid for quick strainer-basket access without special tools\u003c\/li\u003e\n  \u003cli\u003eUnion fittings allow pump removal without cutting pipe\u003c\/li\u003e\n  \u003cli\u003eAccessible volute and pot for routine inspection and cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair SuperFlo High Performance Pumps 1HP EC is aimed at pool owners, service professionals, and light-commercial operators who want a compact, reliable pump with quieter operation and flexible plumbing options. It’s a solid choice when you need a durable motor, easy maintenance access, and plumbing adaptability for retrofits or new installations, without adding unnecessary complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the pump include plumbing fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it ships with unionized fittings: 1-1\/2 in. internal slip and 2 in. external slip to fit common pool plumbing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this model suitable for low-noise applications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the integral volute and pot plus robust motor design reduce hydraulic and mechanical noise during operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54208612696248,"sku":"B091JFVGJL","price":1500.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-superflo-1hp-ec-front-view.jpg?v=1790665940"},{"product_id":"pentair-intellichlor-power-center-salt-chlorine-generator-control-module-110-230vac-cell-hour-tracking","title":"Pentair IntelliChlor Power Center salt chlorine generator control module — 110\/230VAC, cell-hour tracking","description":"\u003cp\u003e\u003cstrong\u003ePentair's IntelliChlor Power Center is the control and power module that drives an IntelliChlor salt chlorine generator, turning simple pool salt into the pool's sanitizer with automated monitoring and adjustable output.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe IntelliChlor Power Center provides the electronics, user interface and AC power conversion to run compatible IntelliChlor pool salt cells. This listing is for the Power Center only; the salt cell (models IC20, IC40 or IC60) is sold separately. The unit supports both 110 VAC and 230 VAC wiring and offers clear on-board displays for salt level, cell cleanliness, sanitizer production and flow status, plus a unique cell-hour tracking feature that reports remaining cell life in real time.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Power Center connect to my existing pool system?\u003c\/h3\u003e\n\u003cp\u003eThe Power Center mounts near the pool equipment and wires to both the salt cell and your facility's electrical supply. It accepts either 110 VAC or 230 VAC input, making it suitable for a wide range of residential and light-commercial installations. Wiring should follow local electrical codes and may require a certified electrician for installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with IntelliChlor IC20, IC40 and IC60 cells\u003c\/li\u003e\n  \u003cli\u003eAccepts 110 VAC or 230 VAC power feeds\u003c\/li\u003e\n  \u003cli\u003eHardwired connection to the salt cell and pool pump flow switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat information do the displays and controls show?\u003c\/h3\u003e\n\u003cp\u003eClear, easy-to-read displays provide essential runtime and water condition data at a glance. You can monitor salt concentration, cell cleanliness, current sanitizer output and water flow directly on the Power Center. An exclusive cell-hour tracking readout estimates remaining useful life of the salt cell so you can plan replacement ahead of time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSalt level indicator to confirm correct salinity\u003c\/li\u003e\n  \u003cli\u003eCell cleanliness status to signal when cleaning is needed\u003c\/li\u003e\n  \u003cli\u003eSanitizer output percentage to adjust chlorine generation\u003c\/li\u003e\n  \u003cli\u003eReal-time cell hours remaining to schedule maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this unit simplify pool care and maintenance?\u003c\/h3\u003e\n\u003cp\u003eBy automating chlorine production, the Power Center reduces or eliminates frequent trips to buy and handle liquid or granular chlorine. The system's monitoring features make maintenance predictable: built-in alerts and the remaining-hours display cut guesswork about cell replacement and cleaning. Overall, this reduces chemical handling, storage and unexpected downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous automated chlorine generation from common salt\u003c\/li\u003e\n  \u003cli\u003eOnboard alerts and status readouts minimize manual checks\u003c\/li\u003e\n  \u003cli\u003ePredictive cell-life tracking prevents surprises and downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any important limitations or compatibility notes?\u003c\/h3\u003e\n\u003cp\u003eThis product is the Power Center only; you must pair it with a compatible salt cell (IC20, IC40 or IC60) to produce chlorine. Confirm your pool's plumbing and power requirements before purchase—this unit requires a proper hardwired electrical connection. Installation guidelines and local codes should be followed to ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower Center sold without salt cell — cell models IC20\/IC40\/IC60 required\u003c\/li\u003e\n  \u003cli\u003eMust be hardwired to 110 VAC or 230 VAC per local code\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for electrical work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair IntelliChlor Power Center is targeted at pool owners, service professionals and light-commercial facilities that want an automated, low-hassle chlorine generation system. It's ideal for those who prefer reduced chemical handling, predictable maintenance scheduling and clear operational feedback; pair it with the correct IntelliChlor cell model for full system function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the salt cell included with the Power Center?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This listing is for the Power Center only; compatible IntelliChlor cells (IC20, IC40 or IC60) are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Power Center run on my household voltage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit accepts either 110 VAC or 230 VAC wiring, but professional installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54209040482488,"sku":"B08MVBQTXY","price":1284.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-intellichlor-power-center-front-panel.jpg?v=1790667684"},{"product_id":"pentair-stack-flue-sensor-42002-0024s-direct-replacement-for-sta-rite-max-e-therm-restores-temp-feedback","title":"Pentair Stack Flue Sensor 42002-0024S — Direct Replacement for Sta‑Rite Max‑E‑Therm, Restores Temp Feedback","description":"\u003cp\u003e\u003cstrong\u003ePentair 42002-0024S is a direct-replacement stack flue sensor engineered to monitor exhaust temperature in Sta‑Rite Max‑E‑Therm pool and spa heaters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Sta‑Rite Max‑E‑Therm heater is showing error codes or shutting down unexpectedly, a worn or faulty stack flue sensor can be the culprit. The Pentair 42002-0024S is designed to bolt into the heater's flue assembly and provide reliable temperature feedback to the control board. This replacement part restores proper temperature sensing without requiring modifications to the heater, helping bring it back to normal operation quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 42002-0024S fit into my heater’s system?\u003c\/h3\u003e\n\u003cp\u003eThis sensor installs in the flue stack where it measures exhaust temperature and relays that information to the heater’s control module. It uses the same mounting footprint and electrical connector as the original Sta‑Rite part, so installation is straightforward for technicians or experienced DIYers. Correct placement ensures accurate readings and prevents nuisance lockouts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Sta‑Rite Max‑E‑Therm compatible models\u003c\/li\u003e\n  \u003cli\u003eMounts in the flue stack to sense exhaust temperature\u003c\/li\u003e\n  \u003cli\u003eMatches original connector and mounting dimensions\u003c\/li\u003e\n  \u003cli\u003eRestores proper feedback to the heater control board\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installing this sensor stop intermittent shutdowns or error codes?\u003c\/h3\u003e\n\u003cp\u003eIf shutdowns are caused by incorrect flue temperature readings, replacing a degraded sensor often resolves those faults. The 42002-0024S provides stable, repeatable temperature data so the controller can make correct safety and performance decisions. However, other issues—such as wiring damage, control board faults, or ventilation obstruction—should also be checked.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFixes faults tied specifically to faulty flue temperature sensing\u003c\/li\u003e\n  \u003cli\u003eDoes not replace diagnosis of wiring or controller problems\u003c\/li\u003e\n  \u003cli\u003eRecommended to test wiring and flue airflow concurrently\u003c\/li\u003e\n  \u003cli\u003eProfessional troubleshooting advised for persistent errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and compatibility?\u003c\/h3\u003e\n\u003cp\u003eInstallation generally involves powering off the heater, removing the flue access components, unplugging the old sensor, and securing the replacement in the same location. The 42002-0024S is compatible with Sta‑Rite Max‑E‑Therm heaters that used the original Pentair\/Sta‑Rite part number format. Always follow the heater manufacturer’s service manual and local codes when replacing components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower down heater and follow lockout\/tagout procedures\u003c\/li\u003e\n  \u003cli\u003eUse original mounting hardware and ensure tight, sealed fit\u003c\/li\u003e\n  \u003cli\u003eConfirm wiring connector matches control board plug\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility with your heater model before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I expect the replacement sensor to last?\u003c\/h3\u003e\n\u003cp\u003eLongevity depends on operating conditions, such as frequency of use, combustion quality, and exposure to corrosive environments. Under normal residential conditions, a proper sensor can last several years, but periodic inspection is wise. Replacing a suspect sensor at first signs of failure avoids repeated service calls and improves heater reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurability influenced by heater usage and vent conditions\u003c\/li\u003e\n  \u003cli\u003eRegular inspection can catch drift before control issues occur\u003c\/li\u003e\n  \u003cli\u003eReplace any sensor that shows physical damage or erratic readings\u003c\/li\u003e\n  \u003cli\u003eKeep flue and venting clean to extend sensor life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Pentair 42002-0024S stack flue sensor is intended for pool and spa owners, HVAC technicians, and service professionals maintaining Sta‑Rite Max‑E‑Therm heaters. Choose this part if you need a factory‑compatible temperature sensor to restore correct flue sensing and reduce false shutdowns. If you’re unsure about compatibility or diagnosis, consult a qualified service technician to confirm the heater model and rule out electrical or venting issues before replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 42002-0024S compatible with all Sta‑Rite Max‑E‑Therm models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Sta‑Rite Max‑E‑Therm heaters using the original flue sensor footprint; confirm your heater model before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Experienced DIYers can install it following the heater manual, but professional service is recommended if uncertain about wiring or safety steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54209153368248,"sku":"B004VTGELU","price":207.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-42002-0024s-front-view.jpg?v=1790668081"},{"product_id":"pentair-pro-vac-r201276-14-inch-pool-vacuum-head-heavy-duty-suction-adjustable-wheels","title":"Pentair Pro Vac R201276 14-inch Pool Vacuum Head — Heavy-Duty Suction, Adjustable Wheels","description":"\u003cp\u003e\u003cstrong\u003ePentair R201276 214 Pro Vac Series is a heavy-duty 14-inch pool vacuum head engineered to concentrate suction and guide debris for fast, consistent cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for both home pools and demanding commercial environments, the Pentair Pro Vac R201276 combines a specialized suction chamber, full-width flexible strips and adjustable wheels to maximize pickup along floors and walls. Its sturdy metal swivel handle, ball-bearing wheels and stainless hardware make it a durable addition to maintenance routines, while the 1-1\/2-inch hose swivel fits standard pool vacuum hoses for easy setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Pro Vac head improve suction and debris pickup?\u003c\/h3\u003e\n\u003cp\u003eThe vacuum head uses a shaped suction chamber to concentrate water flow across the full cleaning width, increasing velocity where it matters. Flexible skirts at the front edge act as guides that channel leaves, sand and other debris directly into the chamber rather than scattering it away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuction chamber design focuses flow evenly across cleaning area\u003c\/li\u003e\n  \u003cli\u003eFull-width flex strips direct debris toward the intake\u003c\/li\u003e\n  \u003cli\u003e14-inch cleaning width balances coverage and maneuverability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat adjustments let me tune cleaning performance?\u003c\/h3\u003e\n\u003cp\u003eAll wheels on the head are adjustable so you can raise or lower the vacuum to change the clearance and suction intensity. Lowering the wheels increases vacuum pressure at the surface for heavier debris; raising them reduces friction for delicate pool finishes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable wheels for fine-tuning vacuum velocity\u003c\/li\u003e\n  \u003cli\u003eBall-bearing wheels for smoother, more consistent movement\u003c\/li\u003e\n  \u003cli\u003eStainless steel fasteners and metal swivel for reliable adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it easy to connect and use with existing equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Pro Vac includes a 1-1\/2-inch hose swivel connection that fits standard vacuum hoses, so installation is quick. The metal swivel handle helps maintain smooth steering while you guide the head across floors and up walls, making routine vacuuming efficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded 1-1\/2-inch vac hose swivel for standard compatibility\u003c\/li\u003e\n  \u003cli\u003eMetal swivel handle for improved control and reach\u003c\/li\u003e\n  \u003cli\u003eDurable construction designed for repeated commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and build details I should know?\u003c\/h3\u003e\n\u003cp\u003eThe commercial 14-inch model measures 24-3\/4 inches long by 15 inches wide and 9 inches high overall, with component dimensions around 2.84 x 2.66 x 2.33 inches for certain parts. Heavy-duty components such as ball bearings and stainless hardware add longevity for ongoing maintenance schedules.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall: 24-3\/4\" L x 15\" W x 9\" H\u003c\/li\u003e\n  \u003cli\u003eComponent dimension reference: 2.840 x 2.660 x 2.330 in\u003c\/li\u003e\n  \u003cli\u003eIncludes ball-bearing wheels and stainless steel nut and bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool service professionals and homeowners who need a dependable, high-capacity cleaning head will benefit from the Pentair R201276 214 Pro Vac Series. It suits concrete, vinyl and fiberglass pools that require efficient debris collection and frequent use, offering adjustable performance and commercial-grade components for long service life. Choose this model when you want a balance of aggressive pickup, easy hose compatibility and durable construction for regular maintenance tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this vacuum head fit my standard 1-1\/2-inch pool hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Pro Vac includes a 1-1\/2-inch hose swivel connection designed for standard pool vacuum hoses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I adjust it for different debris types?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. All wheels are adjustable so you can alter clearance and suction velocity for light or heavy debris.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":54209178042552,"sku":"B003840IV6","price":288.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/pentair-front-view-pro-vac-14-inch.jpg?v=1790668188"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/pentair-intellichlor-plus40-front-view.jpg?v=1790679836","url":"https:\/\/canadianlawn.ca\/collections\/pentair.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}