{"title":"Oregon","description":"\u003cp\u003eBrowse 133 Oregon products at Canadian Lawn, including chainsaw chains, bars \u0026amp; oil, string trimmer parts \u0026amp; heads and trimmer line \u0026amp; spools. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"oregon-8-felling-wedge-lightweight-serrated-plastic-durable-injection-molded-8-inch-for-chainsaw-kerf-control","title":"Oregon 8\" Felling Wedge — Lightweight Serrated Plastic, Durable Injection-Molded 8-inch for Chainsaw Kerf Control","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon 8\" Felling Wedge is a lightweight, serrated plastic wedge built to keep cuts open, prevent bar pinching, and guide tree direction during felling and bucking.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you’re working with standing timber, a dependable wedge is an essential safety and efficiency tool. Oregon’s eight-inch wedge balances portability with enough thickness to withstand repeated strikes while the molded serrations bite into wood to hold position. It’s intended for regular use by professional loggers and experienced arborists who need a compact tool that reduces interruptions and helps maintain control over tree direction.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this wedge help prevent my chainsaw bar from getting pinched?\u003c\/h3\u003e\n\n\u003cp\u003eThe wedge fills the cut and forces the tree’s splitting surfaces apart as you fell or buck, keeping the kerf open so the chainsaw bar does not bind. Its sturdy plastic construction resists deformation under hammer strikes, while the serrated face grips the wood fiber to reduce slippage. That means fewer stops to clear and reset, helping your saw run smoothly through the cut.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSerrated large face secures wedge in the kerf to minimize movement\u003c\/li\u003e\n  \u003cli\u003eThick profile maintains separation of cut faces under pressure\u003c\/li\u003e\n  \u003cli\u003eDurable plastic absorbs repeated mallet hits without cracking\u003c\/li\u003e\n  \u003cli\u003e8\" length provides leverage for medium to large diameter trees\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the wedge easy to carry and use on remote jobsites?\u003c\/h3\u003e\n\n\u003cp\u003eThis model is intentionally lightweight and compact so you can store it in a pocket, belt pouch, or tool pack without adding bulk. Its balanced size is practical for long days in the field, and the molded shape makes it simple to position with one hand while holding the saw with the other. Portability helps you keep essential gear close at hand when mobility matters most.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompact 8\" length fits standard pockets and belt carriers\u003c\/li\u003e\n  \u003cli.lightweight material reduces overall carry load for crews\u003e\n  \u003cli\u003eEasy-to-grip profile for rapid placement and re-positioning\u003c\/li\u003e\n  \u003cli\u003eSuitable for mobile logging, tree service, and trail work\u003c\/li\u003e\n\u003c\/li.lightweight\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this wedge stand up to professional use and repeated strikes?\u003c\/h3\u003e\n\n\u003cp\u003eOregon designed this wedge for recurring field use: the plastic formulation resists chipping and deformation while remaining forgiving on impact. It performs well with a wooden or rubber mallet and tolerates the repeated blows common in felling operations. While not made of metal, its construction provides a good balance of resilience and safety for typical logging forces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInjection-molded plastic engineered for toughness and flexibility\u003c\/li\u003e\n  \u003cli.resistant to splitting or cracking under normal striking loads\u003e\n  \u003cli.serrations preserve grip through multiple uses\u003e\n  \u003cli.sized for medium-to-large cutting tasks without excessive wear\u003e\n\u003c\/li.sized\u003e\u003c\/li.serrations\u003e\u003c\/li.resistant\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tree sizes and situations is the 8\" wedge best suited for?\u003c\/h3\u003e\n\n\u003cp\u003eThe eight-inch length is a versatile middle ground — larger than compact wedges but easier to handle than very long models. It’s ideal for medium to larger diameter trunks where you need reliable separation but still value quick placement and transport. For exceptionally small or extremely large trees, Oregon also offers alternative lengths to match the job demands.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli.good for medium and many large-diameter trees encountered in felling\u003e\n  \u003cli.pocketable option when longer wedges would be cumbersome\u003e\n  \u003cli.available alongside and sizes for flexibility\u003e\n  \u003cli.well-suited to forestry crews tree service professionals and landowners\u003e\n\u003c\/li.well-suited\u003e\u003c\/li.available\u003e\u003c\/li.pocketable\u003e\u003c\/li.good\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Oregon 8\" Felling Wedge is aimed at professional loggers, arborists, and experienced land managers who need a dependable, easy-to-carry tool that improves control and reduces bar pinching during felling or bucking. It’s a practical addition to any chainsaw kit when you want a balance of durability, grip, and portability without the weight of metal wedges.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this wedge with any mallet or hammer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use a wooden or rubber mallet for best results; avoid steel hammers to reduce risk of cracking the plastic.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this wedge suitable for very large trees?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It works well for many large trees, but for extremely thick trunks consider the 10\" or 12\" Oregon sizes for greater separation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54192777363640,"sku":"B073XN43H7","price":41.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-8-inch-wedge-front-profile.jpg?v=1790550284"},{"product_id":"oregon-replacement-wheel-8-x-175-72-108-1-2-bore-diamond-tread-offset-plastic-hub","title":"Oregon Replacement Wheel 8 x 175 (72-108) — 1\/2\" Bore, Diamond Tread Offset Plastic Hub","description":"\u003cp\u003e\u003cstrong\u003eOregon 72-108 is an 8 x 175 replacement wheel with a diamond tread and an offset plastic hub, designed for reliable traction and simple hub mounting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 8 x 175 wheel from Oregon combines a hardwearing diamond tread pattern with a plastic offset hub to serve as a dependable rolling component for small equipment and carts. Built with a 1\/2\" inner diameter and a 1-3\/8\" hub length, it balances compact size with stable bearing support. The wheel’s geometry and materials make it a practical choice for maintenance, replacement, or custom projects where predictable rolling performance and easy installation matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the diamond tread help in everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe diamond tread pattern increases surface contact and offers multi-directional grip on a range of surfaces without adding unnecessary bulk. It sheds light debris better than smooth wheels and reduces slipping on mildly uneven or damp floors. The tread design also helps distribute wear evenly to extend usable life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiamond pattern for improved traction on concrete, gravel, and grass\u003c\/li\u003e\n  \u003cli\u003eEven wear profile to lengthen service life\u003c\/li\u003e\n  \u003cli\u003eResists light debris build-up compared with slick treads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mounting dimensions do I need to know before replacement?\u003c\/h3\u003e\n\u003cp\u003eBefore swapping wheels, confirm the axle diameter and available hub length to ensure a snug fit. This Oregon wheel accepts a 1\/2\" axle through its inner bore and features an offset plastic hub measuring 1-3\/8\" long, so measure both axle and mounting bracket depth. The offset hub can help align load center depending on your frame layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 1\/2\" (fits 1\/2\" axles)\u003c\/li\u003e\n  \u003cli\u003eHub length: 1-3\/8\" for secure bearing engagement\u003c\/li\u003e\n  \u003cli\u003eOffset hub for adjusted wheel centerline on narrow brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich types of equipment is this wheel best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis wheel is sized and specified for smaller utility equipment, hand trucks, lawn and garden carts, and other light-duty applications. Its compact 8 x 175 profile keeps overall clearance low while giving enough footprint for stable rolling. The plastic hub reduces weight and resists corrosion compared with metal hubs in outdoor or humid environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for light-duty carts, dollies, and garden equipment\u003c\/li\u003e\n  \u003cli\u003eCompact diameter for low-clearance setups\u003c\/li\u003e\n  \u003cli\u003ePlastic hub that resists rust and reduces assembly weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 72-108 8 x 175 wheel is aimed at DIYers, maintenance technicians, landscapers, and anyone replacing worn wheels on small equipment who needs a rugged tread pattern, simple 1\/2\" axle compatibility, and a corrosion-resistant hub. It’s a straightforward, economical choice when you want predictable traction, easy installation, and a wheel that fits tight mounting spaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this wheel fit a 1\/2\" axle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon 72-108 has a 1\/2\" inner diameter designed to accept a 1\/2\" axle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the hub metal or plastic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hub is offset plastic, offering lighter weight and resistance to corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54192836509880,"sku":"B0018U24XM","price":40.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-72-108-front-view.jpg?v=1790552216"},{"product_id":"oregon-bar-chain-oil-1-quart-bottle-high-tack-all-season-chainsaw-lubricant","title":"Oregon Bar \u0026 Chain Oil 1 Quart Bottle — High-Tack, All-Season Chainsaw Lubricant","description":"\u003cp\u003e\u003cstrong\u003eOregon Premium Bar \u0026amp; Chain Oil is a high-tack, all-season chainsaw lubricant formulated to cling to the bar and chain, reduce wear, and resist resin and sap build-up.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your chainsaw and other bar-and-chain tools running smoothly with a lubricant designed for tough conditions. This 1-quart (946 ml) bottle contains Oregon's specially compounded oil that emphasizes tackiness to minimize \"throw off,\" protects metal surfaces from corrosion, and helps extend the life of bars and chains by reducing abrasive wear and sticky residue accumulation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil reduce \"throw off\" when I'm cutting?\u003c\/h3\u003e\n\u003cp\u003eThe formulation increases film strength and surface adhesion so oil stays on the bar and chain instead of flinging away during use. That means a more consistent lubrication layer throughout the cut and less frequent topping up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-tack additives improve adhesion under centrifugal force.\u003c\/li\u003e\n  \u003cli\u003eViscosity designed for both warm and cold conditions.\u003c\/li\u003e\n  \u003cli\u003eReduces oil wastage and drip during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it help prevent resin, sap, and gum from gumming up my chain?\u003c\/h3\u003e\n\u003cp\u003eYes—this oil is formulated to resist buildup that commonly forms from tree resins and sap. By limiting deposit accumulation, it keeps cutting profiles cleaner and maintains smoother chain motion between sharpenings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecial additives slow down sticky residue formation.\u003c\/li\u003e\n  \u003cli\u003eMakes cleaning and maintenance easier and less frequent.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve sharpness and cutting efficiency of the chain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this oil suitable for different tools and weather?\u003c\/h3\u003e\n\u003cp\u003eOregon Premium Bar \u0026amp; Chain Oil is an all-season lubricant compatible with gas and electric chainsaws, pole saws, hedge trimmers, and other slide-bar or chain-driven equipment. Its performance holds up in cold weather while remaining effective during warmer months.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for use on most brand bars and chains.\u003c\/li\u003e\n  \u003cli\u003eEffective from winter chills to summer heat due to balanced viscosity.\u003c\/li\u003e\n  \u003cli\u003eDesigned for both professional and homeowner tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this oil protect metal parts and extend equipment life?\u003c\/h3\u003e\n\u003cp\u003eThe oil forms a durable lubricating film that reduces metal-to-metal contact, preventing scuffing and wear on bar rails and chain links. It also contains corrosion inhibitors that shield exposed metal surfaces from rust, especially when tools are stored outdoors or in damp environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh film-strength reduces abrasive wear on components.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-inhibiting ingredients protect against rust.\u003c\/li\u003e\n  \u003cli\u003eLeads to fewer repairs and longer service intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Oregon Premium Bar \u0026amp; Chain Oil is aimed at anyone who uses bar-and-chain equipment regularly—landscapers, arborists, property owners, and weekend users who want reliable lubrication that minimizes maintenance and keeps tools cutting longer. The 1-quart bottle is convenient for carrying to the job, refilling shop supplies, or storing with seasonal equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this oil in any brand of chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Oregon Premium Bar \u0026amp; Chain Oil is compatible with most brands and types of bar-and-chain equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this oil suitable for winter use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its all-season formulation maintains tackiness and prevents throw off in cold temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54192838279352,"sku":"B0018U0A3S","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-bar-chain-oil-front-label.jpg?v=1790552305"},{"product_id":"oregon-pre-loaded-chainsaw-grease-gun-compact-one-handed-lubricator-transparent-reservoir","title":"Oregon Pre-Loaded Chainsaw Grease Gun — Compact One-Handed Lubricator, Transparent Reservoir","description":"\u003cp\u003e\u003cstrong\u003eOregon’s Pre-Loaded Grease Gun is a ready-to-use, single-handed lubricator designed to deliver grease directly into chainsaw bar nose bearings for smoother operation and reduced wear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you maintain chainsaws, keeping the bar nose bearings lubricated is one of the easiest ways to extend component life and preserve cutting performance. This compact Oregon grease gun ships pre-filled with all-purpose lubricant, features a steel, spring-loaded nozzle for accurate dispensing into cup-style fittings, and includes a transparent chamber so you can monitor remaining grease without opening the cap.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the grease gun simplify bar nose lubrication?\u003c\/h3\u003e\n\u003cp\u003eThe grease gun is engineered for fast, repeatable lubrication with one-handed operation. Its pointed steel nozzle and spring-loaded pump action fit cup-shaped grease fittings and force grease directly into the bearing area, eliminating messy squeeze tubes or bulky cartridges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-filled with all-purpose grease—ready from the box\u003c\/li\u003e\n  \u003cli\u003eSteel nose and spring-loaded pump for precise pressure\u003c\/li\u003e\n  \u003cli\u003eOne-handed, self-dispensing operation for quick field use\u003c\/li\u003e\n  \u003cli\u003eTransparent chamber for visual fill-level monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my chainsaw and guide bar nose?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon grease gun is compatible with most chainsaw makes and guide bar noses that use cup-type grease fittings. Its pointed nozzle is designed to reach the bearing housing and seal against the fitting so grease goes where it’s needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard cup-style grease fittings common on guide bars\u003c\/li\u003e\n  \u003cli\u003eWorks with most chainsaw brands and bar designs\u003c\/li\u003e\n  \u003cli\u003eCompact shape for access in tight chainsaw setups\u003c\/li\u003e\n  \u003cli\u003eNot intended for non-cup fittings or high-pressure industrial greasing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and refillable is the unit for year-round work?\u003c\/h3\u003e\n\u003cp\u003eOregon built the grease gun from high-quality plastic to withstand temperature changes encountered in seasonal use. When the factory charge runs low, the unit is straightforward to refill so you can keep it in service through the cutting season and beyond.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality plastic body resists cracking from temperature swings\u003c\/li\u003e\n  \u003cli\u003eTransparent reservoir gives quick visual check of lubricant level\u003c\/li\u003e\n  \u003cli\u003eEasy-to-open design for refilling with compatible grease\u003c\/li\u003e\n  \u003cli\u003ePre-loaded to start immediately out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and maintenance benefits should I expect?\u003c\/h3\u003e\n\u003cp\u003eRegularly greasing the bar nose bearings reduces friction and heat, helping to minimize premature wear and maintain smooth chain travel. The precision nozzle lowers the chance of over-application and keeps grease where it protects moving parts, reducing cleanup and downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTargets grease into bearings to reduce friction and wear\u003c\/li\u003e\n  \u003cli\u003eControlled dispensing reduces wasted grease and mess\u003c\/li\u003e\n  \u003cli\u003eQuick maintenance intervals mean less downtime in the field\u003c\/li\u003e\n  \u003cli\u003ePre-loaded convenience encourages regular lubrication habits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon Pre-Loaded Grease Gun is made for professional lumber workers, arborists, landscapers and serious homeowners who regularly operate chainsaws and want a fast, reliable way to protect guide bar nose bearings. It’s ideal for anyone who prefers a compact, ready-to-use tool that delivers precise grease application, reduces maintenance time, and is simple to refill and inspect between jobs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Oregon grease gun ready to use out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it ships pre-loaded with all-purpose lubricant and is ready for immediate use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I refill the grease gun when it’s empty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the transparent reservoir opens for easy refilling with compatible grease.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54192929931448,"sku":"B00004RA7R","price":41.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-grease-gun-front-view.jpg?v=1790554784"},{"product_id":"oregon-gator-speedload-trimmer-line-disks-095-10-pack-pre-cut-pop-in-disks-heat-treated-for-longer-life","title":"Oregon Gator SpeedLoad Trimmer Line Disks .095\" (10-Pack) — Pre-Cut Pop-In Disks, Heat-Treated for Longer Life","description":"\u003cp\u003e\u003cstrong\u003eOregon 24-295-10 Gator SpeedLoad trimmer line disks are pre-cut, pop-in replacement coils that let you reload a compatible trimmer head in about 20 seconds.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact, tongue-and-groove disks are designed for quick swaps in Oregon 24-200 and 24-250 4-1\/2\" Gator SpeedLoad heads, delivering a neat, tangle-free alternative to traditional loose line. Each disk contains .095\" (2.4 mm) gauge line at approximately 12.5 ft (3.8 m) length and is formulated with a patented heat treatment to resist wear and breakage, offering up to twice the life of ordinary nylon line. The 10-pack keeps spares on hand so you can minimize downtime on big jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast can I replace line with these disks?\u003c\/h3\u003e\n\n\u003cp\u003eReplacement is engineered to be rapid and straightforward: the disk simply snaps into the SpeedLoad head, eliminating the need to thread and wind loose line. Typical reloads take around 20 seconds once you get the hang of the motion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-cut, pop-in disks remove winding steps\u003c\/li\u003e\n  \u003cli\u003eNo tangling or manual feeding of loose line\u003c\/li\u003e\n  \u003cli\u003eCompact disks for easy on-site storage and quick swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and trimmer heads are these compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThese disks are intended as replacement line for Oregon Gator SpeedLoad 4-1\/2\" heads—specifically models 24-200 and 24-250. They fit only SpeedLoad-type systems that accept the tongue-and-groove disk format.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Oregon 24-200 and 24-250 SpeedLoad heads\u003c\/li\u003e\n  \u003cli\u003eWorks on trimmers designed for 4-1\/2\" heads and .095\" line gauge\u003c\/li\u003e\n  \u003cli\u003eThis product is a replacement part, not a complete head assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tongue-and-groove profile affect cutting?\u003c\/h3\u003e\n\n\u003cp\u003eThe disk’s tongue-and-groove line geometry forms crisp cutting edges that slice vegetation more efficiently than rounded lines. That sharper profile helps provide cleaner cuts and can reduce the frequency of re-cuts along stems and weeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharp edges improve cutting performance on grass and light brush\u003c\/li\u003e\n  \u003cli\u003eImproved efficiency can shorten job time on dense patches\u003c\/li\u003e\n  \u003cli\u003eBalanced profile reduces vibration and line wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the line, and how does it compare to standard nylon?\u003c\/h3\u003e\n\n\u003cp\u003eThis line is engineered with a specialized formulation and a patented heat treatment that increases tensile strength and abrasion resistance. Oregon rates the disks to last up to roughly twice as long as typical string in similar conditions, meaning fewer reloads and less downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePatented heat treatment reduces breakage and wear\u003c\/li\u003e\n  \u003cli\u003eHigher durability helps on abrasive or woody growths\u003c\/li\u003e\n  \u003cli\u003eConsistent diameter (.095\" \/ 2.4 mm) maintains cutting performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers, groundskeepers, and homeowners who use compatible Oregon Gator SpeedLoad trimmer heads and want a faster, cleaner way to reload line. The 10-pack is suited to those tackling medium to large yards, commercial properties, or repeated maintenance tasks where minimizing downtime is a priority. If you already own a 24-200 or 24-250 SpeedLoad head and prefer a tidy, reliable reload method with longer-lasting line, these disks are a practical upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these disks fit any trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They fit Oregon Gator SpeedLoad 4-1\/2\" heads specifically, compatible with models 24-200 and 24-250.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is each disk's line and what gauge is it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each disk contains about 12.5 ft (3.8 m) of .095\" (2.4 mm) gauge line.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54192957391032,"sku":"B01C3XYGP6","price":39.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-gator-speedload-front-packaging.jpg?v=1790555996"},{"product_id":"oregon-8-edger-blade-40-840-8-x-8-in-1-center-hole-4-tooth-durable-replacement","title":"Oregon 8\" Edger Blade 40-840 — 8 x 8 in, 1\" Center Hole, 4-Tooth Durable Replacement","description":"\u003cp\u003e\u003cstrong\u003eOregon 40-840 is an OEM 8\" edger blade with four teeth and a 1\" center hole designed to restore clean, consistent edging on compatible walk-behind and push edgers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis genuine Oregon replacement blade fits a range of commercial and homeowner edgers, offering reliable metal quality and a precise fit. It’s sized to match standard 8-inch edging tools and engineered for durability and consistent cutting performance. The blade’s 4-tooth design balances cutting efficiency with reduced vibration, while the 1-inch center hole ensures secure mounting to the machine hub.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this Oregon 40-840 edger blade fit?\u003c\/h3\u003e\n\u003cp\u003eThe 40-840 is compatible with several popular edger brands that use an 8\" blade with a 1\" center bore. Before ordering, check your machine’s blade dimensions and mounting hole size to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include J Thomas EB-6276, Mowmore EBS276 and Laser 91296\u003c\/li\u003e\n  \u003cli\u003eAlso fits Sunbelt B1SB6276, Rotary 6276 and Stens 375-525\u003c\/li\u003e\n  \u003cli\u003eBlade measures approximately 8.00 x 8.00 x 0.10 inches with a 1\" center hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 4-tooth design affect edging performance?\u003c\/h3\u003e\n\u003cp\u003eFour teeth provide a balance between smooth cutting and low vibration for straightforward edging tasks. This configuration removes turf and soil effectively while maintaining control for accurate edge lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFewer teeth means easier sharpening and reduced drag during cutting\u003c\/li\u003e\n  \u003cli\u003eDesigned for consistent edge profiles along sidewalks and flowerbeds\u003c\/li\u003e\n  \u003cli\u003eReduces chatter compared with high-tooth-count blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and size specifics I should know?\u003c\/h3\u003e\n\u003cp\u003eThe blade is manufactured to Oregon’s OEM standards for thickness and durability, matching original equipment dimensions so it mounts and spins true. Its 0.10-inch thickness provides strength without excessive weight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall dimensions: approximately 8.00 x 8.00 x 0.10 inches\u003c\/li\u003e\n  \u003cli\u003eFour cutting teeth positioned for balanced rotation\u003c\/li\u003e\n  \u003cli\u003e1\" center hole for secure, standard hub attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install or maintain this replacement blade?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard edger blade replacement steps: disconnect the spark plug or power source, remove the retaining hardware, mount the blade with correct orientation, and torque fasteners to manufacturer specs. Regular inspection and occasional sharpening keep edges neat and extend blade life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off power and follow safety lockout procedures before handling\u003c\/li\u003e\n  \u003cli\u003eReplace mounting hardware if worn and retorque to spec\u003c\/li\u003e\n  \u003cli\u003eSharpen as needed and inspect for cracks or excessive wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 40-840 edger blade is ideal for landscapers, lawn care professionals, and homeowners with compatible walk-behind or push edgers who want an OEM-quality replacement. Choose this blade when you need a direct-fit 8-inch, 4-tooth part with a 1-inch center hole that restores factory performance and helps create clean, professional-looking edges.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Oregon 40-840 an original equipment part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon 40-840 is a genuine OEM replacement blade manufactured to match original specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size center hole does this blade have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blade features a 1-inch center hole, standard for the listed compatible edger models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193306861752,"sku":"B0018U061O","price":44.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-40-840-front-view-blade.jpg?v=1790560880"},{"product_id":"oregon-oil-filter-short-3-od-2-1-4-height-for-briggs-stratton-28-micron-filtration","title":"Oregon Oil Filter — Short 3\" OD, 2-1\/4\" Height for Briggs \u0026 Stratton, 28‑Micron Filtration","description":"\u003cp\u003e\u003cstrong\u003eOregon oil filter engineered to fit Vanguard 5–14 HP and many Briggs \u0026amp; Stratton engines, offering a compact 28-micron filtration in a 3\" OD, 2-1\/4\" height canister.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis oil filter is a direct-fit replacement designed for small engine applications where space is limited but reliable protection is still required. It replaces multiple OEM numbers including Briggs \u0026amp; Stratton 492932, John Deere LG492932S and selected Kohler, Kawasaki, Tecumseh part numbers. The shorter design makes it an ideal swap where the standard-length filter won't clear engine housings or accessories, while maintaining a fine 28-micron media rating for contaminant control.\u003c\/p\u003e\n\n\u003ch3\u003eWill this filter physically fit my engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the Oregon oil filter is sized to suit a range of small engines that accept the shorter replacement canister. Confirm mounting thread and seal diameter against your engine's filter boss to ensure compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting thread: 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eOverall outside diameter (OD): 3 inches\u003c\/li\u003e\n\u003cli\u003eSeal outside diameter: 2-13\/16 inches\u003c\/li\u003e\n\u003cli\u003eHeight: 2-1\/4 inches (shorter alternative to 83-283 style)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engines and OEM part numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThis filter covers a broad set of small engine makes and models. It is commonly used on Vanguard 5–14 HP units and serves as a replacement for several Briggs \u0026amp; Stratton, John Deere, Kawasaki, Kohler and Tecumseh part numbers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces Briggs \u0026amp; Stratton 492932\u003c\/li\u003e\n\u003cli\u003eEquivalent to John Deere LG492932S and some Kohler numbers\u003c\/li\u003e\n\u003cli\u003eAlso replaces Kawasaki 49065-7007 and Tecumseh 36262\/36563\/36961\u003c\/li\u003e\n\u003cli\u003eFits Briggs Intek Pro model engines, including 122600 and 123600\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow effective is the filtration and what are the pressure specs?\u003c\/h3\u003e\n\u003cp\u003eThe filter uses 28-micron media to trap wear particles and contaminants while maintaining adequate oil flow for small engine lubrication. It includes a relief (bypass) valve calibrated to open within a typical small-engine range to protect oil circulation if the media becomes restricted.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFiltration rating: 28 microns\u003c\/li\u003e\n\u003cli\u003eRelief (bypass) pressure: approximately 8–11 PSI\u003c\/li\u003e\n\u003cli\u003e3\/4\"-16 mounting thread for secure attachment\u003c\/li\u003e\n\u003cli\u003eCompact dimensions for tight installation clearances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and when should I replace it?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same basic steps as other spin-on filters: drain or secure oil level, hand-thread the filter onto the 3\/4\"-16 stud until the seal contacts, then tighten per manufacturer guidance. Replace the filter at regular oil-change intervals or sooner if the engine exhibits oil pressure issues or metal debris is suspected.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHand-thread onto 3\/4\"-16 mounting stud until seal contacts\u003c\/li\u003e\n\u003cli\u003eTighten to recommended torque or finger-tight plus specified turn\u003c\/li\u003e\n\u003cli\u003eReplace at each oil change or per engine maker intervals\u003c\/li\u003e\n\u003cli\u003eInspect relief\/bypass and oil clarity for signs of heavy wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Oregon oil filter is aimed at owners, fleet managers and service technicians working on Vanguard 5–14 HP engines and compatible Briggs \u0026amp; Stratton, Kawasaki, Kohler or Tecumseh small engines that require a short, reliable spin-on filter. It’s especially useful where standard-length filters interfere with mounting brackets, steering linkages or other nearby components, and for anyone wanting a straightforward cross-reference replacement for the listed OEM part numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this filter compatible with Briggs \u0026amp; Stratton 492932?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It replaces Briggs \u0026amp; Stratton 492932 and several equivalent OEM numbers; match mounting dimensions before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the filter's micron rating and bypass pressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The filter uses 28-micron media and has a relief (bypass) valve set around 8–11 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193311875256,"sku":"B000ARS6FE","price":45.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-filter-front-view.jpg?v=1790561086"},{"product_id":"oregon-12-inch-chainsaw-chain-3-8-inch-lp-050-gauge-44-links-semi-chisel-cutters-lubritec-oiling","title":"Oregon 12-inch Chainsaw Chain 3\/8-inch LP .050 Gauge 44 Links — Semi-Chisel Cutters, LubriTec Oiling","description":"\u003cp\u003e\u003cstrong\u003eOregon AdvanceCut S44 is a 12-inch replacement chainsaw chain with 3\/8\" low-profile pitch, .050\" gauge, and 44 drive links designed for reliable cutting and reduced maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Oregon replacement chain fits many popular light-duty chainsaws and is built to balance cutting speed, durability and easier upkeep. Engineered with semi-chisel cutters, a chrome outer layer, hardened rivets and the LubriTec oiling approach, the S44 is intended for homeowners and landscaping pros using saws up to about 42 cc. It meets ANSI B175.1-2012 kickback performance requirements and serves as a direct swap for several OEM chains, making it a versatile choice for routine trimming, limbing and small firewood jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this chain change my cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe semi-chisel cutters deliver fast, efficient cuts while tolerating dirt and debris better than full-chisel teeth, which lowers the need for frequent sharpening in typical yard work. The chrome-plated outer layer and heat-treated steel strengthen the teeth and links for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-chisel cutters for smoother, more forgiving cutting\u003c\/li\u003e\n  \u003cli\u003eChrome outer layer and hardened rivets reduce wear\u003c\/li\u003e\n  \u003cli\u003e44 drive links matched to 12\" guide bars for consistent feed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain fit my saw model and bar size?\u003c\/h3\u003e\n\u003cp\u003eThe S44 is made for saws that accept a 12-inch guide bar with a 3\/8\" low-profile pitch and a .050\" gauge. It is compatible with many common models, including examples from Stihl and other brands, and can replace specific OEM chains with the same pitch, gauge and link count.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 12\" bars and chainsaws rated up to ~42 cc\u003c\/li\u003e\n  \u003cli\u003eCompatible with Stihl MS 170, MS 180, MS 180 C and similar saws\u003c\/li\u003e\n  \u003cli\u003eServes as replacement for listed OEM part numbers with matching specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does LubriTec help reduce upkeep?\u003c\/h3\u003e\n\u003cp\u003eOregon’s LubriTec oiling system helps deliver bar and chain lubrication to key wear points automatically while the saw runs, which lowers friction and extends guide bar and chain life. Better lubrication also reduces heat and can lessen the frequency of tension adjustments during routine cutting tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic oil delivery to chain and bar surfaces\u003c\/li\u003e\n  \u003cli\u003eReduces friction and heat for longer component life\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent chain tension between work sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this chain safe and easy to use?\u003c\/h3\u003e\n\u003cp\u003eThe chain is manufactured to meet recognized kickback-performance standards and is designed to run with lower vibration and reduced kickback tendency compared with some high-aggression chains. That makes it a sensible option for general-purpose cutting where comfort and control matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets ANSI B175.1-2012 kickback performance requirement\u003c\/li\u003e\n  \u003cli\u003eLow-vibration design helps reduce operator fatigue\u003c\/li\u003e\n  \u003cli\u003eChromed cutters and hardened rivets require fewer adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon AdvanceCut S44 is aimed at homeowners, property managers and landscaping professionals who need a dependable 12-inch replacement chain for routine trimming, limbing and small firewood. If your saw accepts a 3\/8\" low-profile pitch, .050\" gauge and 44 drive links, this chain provides a durable, lower-maintenance alternative that is easy to install and suitable for frequent light- to medium-duty use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Stihl MS 180?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Oregon S44 fits Stihl MS 180 if your saw uses a 12\" bar, 3\/8\" LP pitch and .050\" gauge with 44 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen this chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpening frequency depends on use and debris; for regular yard work, expect to sharpen after several hours of cutting or when cutting performance drops.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193331830968,"sku":"B00004RA8G","price":49.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-front-packaging-12in-s44.jpg?v=1790561425"},{"product_id":"oregon-bench-model-chain-breaker-punch-38594-hardened-steel-replacement-for-1-4-325-3-8-404-chains","title":"Oregon Bench-Model Chain Breaker Punch 38594 — Hardened Steel Replacement for 1\/4\", .325\", 3\/8\" \u0026 .404\" Chains","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon 38594 is a direct-replacement punch for bench-model chain breakers that drives out rivets on 1\/4\", .325\", 3\/8\" low profile, 3\/8\" and .404\" pitch saw chains.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your bench-model chain breaker working like new with a precision replacement punch engineered to match Oregon's specifications. This compact steel punch fits Oregon bench models 24548A, 24548B and 24548-SI and restores the tool's ability to remove rivets cleanly so chain repairs and rebuilds are faster and more consistent. It also cross-references part 110439SI, making it easy to confirm compatibility with existing maintenance setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this punch help when removing rivets?\u003c\/h3\u003e\n\u003cp\u003eThe punch concentrates driving force onto the chain rivet, allowing the bench-model chain breaker to separate rivet heads without distorting or damaging the link plates. That focused contact reduces slippage and keeps the chain aligned during removal, producing a cleaner separation and simplifying reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for precise impact to avoid bending link plates\u003c\/li\u003e\n  \u003cli\u003eWorks with multiple common chain pitches for broad usability\u003c\/li\u003e\n  \u003cli\u003eRestores bench-model breaker performance for repeatable results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich chain breakers and chain pitches are compatible?\u003c\/h3\u003e\n\u003cp\u003eThis punch is made for Oregon bench-model chain breakers 24548A, 24548B and 24548-SI and replaces Oregon part number 110439SI. It fits saw chains of the most common pitches used in consumer and light professional saws, so you don't need a different punch for each chain type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with bench-model chain breakers 24548A, 24548B, 24548-SI\u003c\/li\u003e\n  \u003cli\u003eFits 1\/4\", .325\", 3\/8\" low profile, 3\/8\" and .404\" pitch chains\u003c\/li\u003e\n  \u003cli\u003eCross-reference: replaces part 110439SI for easy ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eOregon manufactures replacement punches to withstand repeated strikes and maintain dimensional accuracy. The tool is made from hardened steel to resist deformation, so it keeps a consistent tip profile that aligns with the bench breaker’s driver mechanism and extends the life of both punch and chain breaker.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened steel construction for durability under repeated use\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined tip to match factory tolerances\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize wear on chain plates during rivet removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to replace the punch on my chain breaker?\u003c\/h3\u003e\n\u003cp\u003eSwapping in the 38594 punch is straightforward for anyone familiar with bench-model chain breakers. Typically you remove the old punch from the breaker’s driver assembly and press or bolt the replacement into place—no specialty tools beyond the breaker’s service fasteners are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple replacement procedure—no special tools needed\u003c\/li\u003e\n  \u003cli\u003eDirect-fit to the specified Oregon bench models for quick installation\u003c\/li\u003e\n  \u003cli\u003eMaintains alignment and repeatability after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 38594 punch is intended for homeowners, arborists, and small saw shops that use bench-model chain breakers and need a reliable replacement part to perform chain repairs. It’s especially useful for users who service multiple chain pitches and want a single, OEM-quality punch that restores precise rivet removal and prolongs the life of their chain maintenance tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 38594 punch fit other chain breaker models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed for Oregon bench models 24548A, 24548B, and 24548-SI; compatibility with others isn't guaranteed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which chain pitches can this punch drive out?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It works with 1\/4\", .325\", 3\/8\" low profile, 3\/8\" and .404\" pitch saw chains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193406476472,"sku":"B00SXA4AHI","price":44.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-38594-front-view.jpg?v=1790561844"},{"product_id":"oregon-7-tooth-power-mate-replacement-rim-3-8-pitch-7-spline-floating-design-wear-indicators","title":"Oregon 7-Tooth Power Mate Replacement Rim 3\/8\" Pitch — 7-Spline Floating Design, Wear Indicators","description":"\u003cp\u003e\u003cstrong\u003eOregon 68210 Power Mate rim is a 7-tooth, 7-spline replacement rim for 3\/8\" pitch chains designed to float on the spline for improved alignment and extended sprocket life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement rim is built for professional and serious weekend users who need a durable, easy-to-monitor sprocket rim for common chainsaw brands. The Oregon Power Mate design allows the rim to self-align with the guide bar groove, helps eject sawdust with radial ports, and includes visible wear-depth indicators so you can see when it’s time to replace the rim. It fits many Power Mate rim sprocket systems and works with a wide range of chainsaw makes — always verify fit with your saw manual or parts list.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the floating rim design benefit my saw's performance?\u003c\/h3\u003e\n\u003cp\u003eThe rim is engineered to \"float\" on the spline so the chain and rim can naturally align with the guide bar groove. That alignment reduces misdirected wear on the sprocket and chain, helping components run smoother and last longer. Less binding also reduces vibration and improves cutting consistency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFloating rim centers itself on the spline during operation\u003c\/li\u003e\n  \u003cli\u003eReduces uneven wear on chain and sprocket teeth\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent chain tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do the wear-depth indicators and radial ports do?\u003c\/h3\u003e\n\u003cp\u003eWear-depth indicators provide a quick visual cue so you can replace the rim before it damages the sprocket or chain. The radial port pattern uses centrifugal force to eject sawdust and debris, keeping the rim area cleaner and reducing abrasive buildup. Together they simplify maintenance and protect other drive components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear marks show when replacement is needed\u003c\/li\u003e\n  \u003cli\u003eRadial ports fling out sawdust and chips during use\u003c\/li\u003e\n  \u003cli\u003eCleaner rim area lowers abrasive wear on parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich chainsaws and sprocket systems is this rim compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis Oregon 68210 rim fits 3\/8\" pitch chains in Power Mate rim sprocket systems with a standard 7-tooth, 7-spline configuration. It is specified for many Oregon Power Mate assemblies and listed as compatible with numerous saw brands, but compatibility depends on the exact model and parts layout of your saw.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many Oregon Power Mate sprocket systems and part numbers\u003c\/li\u003e\n  \u003cli\u003eWorks with brands like Husqvarna, Echo, Stihl, Poulan, Makita and more\u003c\/li\u003e\n  \u003cli\u003eAlways cross-check your chainsaw manual or parts diagram before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace this rim to protect my sprocket?\u003c\/h3\u003e\n\u003cp\u003eOregon recommends replacing the rim every two chain loops — a schedule that prevents excessive wear transfer to the sprocket and chain. Regular inspection using the wear-depth indicators helps you replace at the right time and avoid costly damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace rim every two chain changes (two chain loops)\u003c\/li\u003e\n  \u003cli\u003eUse wear-depth indicators to time replacement accurately\u003c\/li\u003e\n  \u003cli\u003eInspect rim and sprocket when changing chains for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 68210 Power Mate rim is aimed at professional sawyers, arborists, landscapers, and experienced homeowners who run 3\/8\" pitch chains with a 7-tooth, 7-spline Power Mate system. If you want a replacement rim that simplifies inspections, helps eject debris, and reduces premature wear on your sprocket assembly, this rim is a practical, cost-effective option — just confirm model compatibility with your saw's parts list before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this rim compatible with 3\/8\" pitch chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon 68210 is made for 3\/8\" pitch chains with a standard 7-tooth, 7-spline Power Mate system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know when to replace the rim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the built-in wear-depth indicators and replace the rim every two chain loops or when wear reaches the indicator.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193614946488,"sku":"B00455Q028","price":42.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-68210-rim-front-view.jpg?v=1790563087"},{"product_id":"oregon-fuel-line-shut-off-valve-07-400-1-8-pipe-thread-to-1-4-nipple-screened-tank-mount-oem-fit","title":"Oregon fuel-line shut-off valve 07-400 — 1\/8\" pipe thread to 1\/4\" nipple, screened tank mount, OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eOregon 07-400 is a replacement fuel-line shut-off valve with a 1\/8\" pipe thread and 1\/4\" fuel nipple, designed to stop fuel flow at the tank for small engines and lawn equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSimple to install and built to OEM-equivalent tolerances, this shut-off valve is an aftermarket replacement that fits a long list of mower and engine brands. It mounts to the gas tank, includes a built-in screen to filter debris, and provides a secure 1\/4\" nipple for standard fuel line hookups. The Oregon unit is intended for routine maintenance or repair when original valves wear, leak, or become clogged.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve connect to my fuel system?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon 07-400 uses a 1\/8\" pipe-thread inlet that screws into compatible tank fittings and a 1\/4\" nipple to accept standard flexible fuel line. The design makes swapping the old valve straightforward with common tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/8\" pipe thread tank connection for threaded fittings\u003c\/li\u003e\n  \u003cli\u003e1\/4\" fuel-line nipple for standard hose slip-on attachment\u003c\/li\u003e\n  \u003cli\u003eHand-tighten or use a wrench on the hex seating area for a leak-free seal\u003c\/li\u003e\n  \u003cli\u003eCompact profile fits tight underside tank locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines will this replace or fit?\u003c\/h3\u003e\n\u003cp\u003eThis Oregon shut-off valve replaces many OEM parts across popular brands, making it a versatile service part for mowers and small engines. Check your machine’s parts list to confirm thread size and mounting style before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Bolens 1703896 \u0026amp; 1718029\u003c\/li\u003e\n  \u003cli\u003eCompatible with Gravely 18563, John Deere AM31850 \u0026amp; PT8655, Norma 42879\u003c\/li\u003e\n  \u003cli\u003eAlso replaces Toro 304-71, Lawn Boy 677052, Scag 48056, AMF 42879\u003c\/li\u003e\n  \u003cli\u003eCommonly used on lawn mowers, small tractors, and similar gasoline tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or installation steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a quick repair: drain or stabilize fuel, remove the old valve, and install the Oregon replacement with the correct thread sealant or tape. The valve’s screen helps reduce clogging, but periodic inspection is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShut off fuel and relieve pressure before removal\u003c\/li\u003e\n  \u003cli\u003eUse thread sealant or PTFE tape on the 1\/8\" pipe thread for a secure fit\u003c\/li\u003e\n  \u003cli\u003eInspect the tank hole and clean debris before installing the new valve\u003c\/li\u003e\n  \u003cli\u003eCheck the valve screen occasionally and replace if full of sediment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this Oregon aftermarket replacement instead of a direct OEM part?\u003c\/h3\u003e\n\u003cp\u003eOregon manufactures aftermarket parts to meet or exceed OEM specifications, offering a practical balance of quality and value. For many routine repairs, the Oregon 07-400 provides the same fit and functional features at a lower cost and with broad compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt to OEM-equivalent tolerances for reliable fit and operation\u003c\/li\u003e\n  \u003cli\u003eIncludes tank mount screen to limit debris in fuel lines\u003c\/li\u003e\n  \u003cli\u003eAffordable solution for common shut-off valve failures\u003c\/li\u003e\n  \u003cli\u003eWidely compatible with multiple historic OEM part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 07-400 is suited for homeowners, landscapers, and service technicians who need an affordable, reliable replacement shut-off valve for gasoline tanks on small engines and lawn equipment. It’s particularly useful when an existing valve leaks, sticks, or when routine maintenance reveals contamination; compatible with many Bolens, John Deere, Toro, Lawn Boy, Gravely, Scag, Norma, and AMF models. Confirm thread size and mounting orientation before purchasing to ensure an exact fit for your equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Oregon 07-400 include a fuel-screen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The valve mounts to the tank and includes a built-in screen to help trap debris before the fuel line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread and hose sizes does this valve use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 1\/8\" pipe thread for the tank and a 1\/4\" nipple for standard fuel hose connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193642897592,"sku":"B01JYTCYTW","price":46.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-07-400-front-view-valve.jpg?v=1790563812"},{"product_id":"oregon-advancecut-s49-14-chainsaw-chain-3-8-lp-pitch-050-gauge-49-links-semi-chisel-cutters","title":"Oregon AdvanceCut S49 14\" Chainsaw Chain — 3\/8\" LP Pitch, .050\" Gauge, 49 Links, Semi‑Chisel Cutters","description":"\u003cp\u003e\u003cstrong\u003eOregon AdvanceCut S49 is a replacement 14-inch chainsaw chain with 3\/8\" low-profile pitch, .050\" gauge, and 49 drive links built for long wear and reliable cutting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Oregon chainsaw chain is engineered as a direct-fit replacement for many 14\" bars and saws up to about 42 cc. It combines heat-treated semi-chisel cutters, a chrome-plated outer face, and hardened rivets to resist abrasion and reduce the frequency of adjustments. The chain also incorporates Oregon's LubriTec oiling design to keep oil where it matters, extending guide bar and chain life and reducing maintenance interruptions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this chain perform on everyday cutting tasks?\u003c\/h3\u003e\n\u003cp\u003eThe semi-chisel cutters slice quickly through clean wood while tolerating dirty or knotty conditions better than full-chisel designs. You’ll notice smoother feeding and fewer snags during routine pruning, firewood, or property cleanup jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-chisel cutters for balanced speed and durability\u003c\/li\u003e\n  \u003cli\u003echrome outer layer reduces wear from dirt and grit\u003c\/li\u003e\n  \u003cli\u003e49 drive links paired with 3\/8\" LP pitch for stable chain engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain fit my saw and bar?\u003c\/h3\u003e\n\u003cp\u003eCheck the drive link count, pitch, and gauge against the markings on your old chain or in your owner’s manual. The Oregon S49 fits 14\" guide bars and is compatible with many models from Craftsman, Poulan, Echo and other brands that use 3\/8\" LP pitch and .050\" gauge chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" low-profile (LP) pitch and .050\" (1.3 mm) gauge\u003c\/li\u003e\n  \u003cli\u003e49 drive links—match the number stamped on your old chain\u003c\/li\u003e\n  \u003cli\u003eFits saws up to ~42 cc and many 14\" bar applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and safety features does the chain include?\u003c\/h3\u003e\n\u003cp\u003eOregon designed this replacement chain to reduce maintenance and improve safety margins. Hardened rivets and the chrome-finished cutters extend service intervals, while the low-kickback profile helps reduce the chance of sudden reactive movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubriTec oiling passages deliver lubricant to key contact points\u003c\/li\u003e\n  \u003cli\u003ehardened rivets and plated cutters for longer life and fewer adjustments\u003c\/li\u003e\n  \u003cli\u003elow-kickback, low-vibration geometry to ease operator fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose and install the correct replacement chain?\u003c\/h3\u003e\n\u003cp\u003eAlways match pitch, gauge, and drive link count to your existing chain or owner's manual before ordering. Installation is standard: release bar tension, loop the chain over the sprocket and bar, then re-tension and lubricate according to your saw’s instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003everify pitch and gauge from drive link markings or manual\u003c\/li\u003e\n  \u003cli\u003ecount 49 drive links or confirm part compatibility list\u003c\/li\u003e\n  \u003cli\u003etension chain and check LubriTec oil feed after initial run-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Oregon AdvanceCut S49 is aimed at homeowners, landscapers, and light-to-medium-duty pros who want a durable, low-maintenance replacement chain for 14\" bars. It’s a practical choice if you need consistent cutting speed with improved resistance to wear and fewer tune-ups between jobs. If you use a 14\" saw for pruning, limb removal, or small tree felling and your saw accepts a 3\/8\" LP, .050\" gauge chain with 49 drive links, this chain is engineered to deliver a reliable balance of lifespan, cutting performance, and ease of upkeep.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eInstallation tip:\u003c\/em\u003e always follow your chainsaw manufacturer's safety and maintenance instructions and confirm chain compatibility before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit my 14\" bar saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your saw uses 3\/8\" LP pitch, .050\" gauge and requires 49 drive links, the Oregon S49 will fit. Confirm with the drive link stamp or your owner's manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does LubriTec help the chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: LubriTec routes oil to key contact points, reducing wear on the bar and chain and extending service intervals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193680187576,"sku":"B00004RA87","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-14in-chain-front-profile.jpg?v=1790564248"},{"product_id":"oregon-muffler-for-briggs-stratton-294599-294599s-3-4-thread-6-1-4-length-for-5-8-hp-engines","title":"Oregon Muffler for Briggs \u0026 Stratton 294599\/294599S — 3\/4\" Thread, 6-1\/4\" Length for 5–8 HP Engines","description":"\u003cstrong\u003eOregon 35-005 is a direct-fit replacement muffler engineered to swap in for Briggs \u0026amp; Stratton 294599 and 294599S models on many 5, 7 and 8 HP small engines.\u003c\/strong\u003e\n\n\u003cp\u003eThis OEM-style muffler delivers the correct pipe thread and compact footprint needed to restore exhaust routing and noise control on lawn and garden engines. Built to the same general dimensions as the original equipment—6-1\/4 inches long with a 2-3\/8-inch outside diameter—and fitted with a 3\/4-inch pipe thread, the Oregon 35-005 is made for straightforward installation on compatible Briggs \u0026amp; Stratton series and model numbers. Sturdy construction and a compact profile make it a practical service part when repairing or refreshing walk-behind mowers, tillers, pressure washers, and other small-engine equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat engines and models will this muffler fit?\u003c\/h3\u003e\n\u003cp\u003eThis muffler is designed to replace Briggs \u0026amp; Stratton part numbers 294599 and 294599S and fits a range of 5, 7 and 8 horsepower engines. It is compatible with several engine series and model families commonly found on residential outdoor power equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible HP ratings: 5 HP, 7 HP, 8 HP\u003c\/li\u003e\n  \u003cli\u003eFits engine series: 130200, 130900, 170700, 190700, 170499, 190400\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers: Briggs \u0026amp; Stratton 294599 and 294599S\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm it will physically fit my machine?\u003c\/h3\u003e\n\u003cp\u003eMeasure the existing muffler and thread to compare dimensions before ordering. The Oregon 35-005 matches the original equipment size and thread spec used on the listed Briggs \u0026amp; Stratton engines, but verify clearance and mounting points on your machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall length: 6-1\/4 inches (measured end-to-end)\u003c\/li\u003e\n  \u003cli\u003eOutside diameter: 2-3\/8 inches for side clearance checks\u003c\/li\u003e\n  \u003cli\u003eThread size: 3\/4-inch pipe thread to match manifold stud or adapter\u003c\/li\u003e\n  \u003cli\u003eConfirm bolt pattern and heat shield\/clearance on your equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specs and packaging details?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon 35-005 arrives as a compact, lightweight replacement part ready for installation. Its packaging and weight make it easy to store as a spare, and the basic dimensions let you plan for space and mounting requirements without surprises.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutside diameter: 2-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003ePipe thread: 3\/4-inch\u003c\/li\u003e\n  \u003cli\u003ePackaged item dimensions: 2.5\" L x 2.5\" W x 6.5\" H\u003c\/li\u003e\n  \u003cli\u003ePackaged weight: 0.48 lb (approximate shipping weight)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I bring?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a quick field repair when the thread and mounting match. You’ll generally need basic hand tools and a fresh gasket if the old one is damaged; replace mounting hardware if corroded for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: wrench set, socket wrench, possibly penetrating oil for stuck studs\u003c\/li\u003e\n  \u003cli\u003eRecommended replacement parts: exhaust gasket and new mounting bolts if needed\u003c\/li\u003e\n  \u003cli\u003eTips: allow an engine cool-down period before removal; check for exhaust leaks after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 35-005 muffler is made for homeowners, small-engine mechanics, and maintenance technicians who need an affordable, reliable replacement for Briggs \u0026amp; Stratton 294599\/294599S on 5–8 HP machines. It suits anyone restoring older mowers, tillers, generators, or pressure washers that use the listed engine series and require the 3\/4\" pipe thread and compact 2-3\/8\" OD muffler profile.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this muffler replace Briggs \u0026amp; Stratton 294599?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon 35-005 is a direct replacement for Briggs \u0026amp; Stratton 294599 and 294599S on compatible engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread size does the muffler use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 3\/4-inch pipe thread and fits the listed 5, 7, and 8 HP engine series.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193685528760,"sku":"B000VYKEL0","price":43.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-35-005-front-view.jpg?v=1790564352"},{"product_id":"oregon-33-431-4-post-dual-mount-solenoid-200a-starter-relay-with-external-ground-and-spade-converters","title":"Oregon 33-431 4-Post Dual-Mount Solenoid, 200A Starter Relay with External Ground and Spade Converters","description":"\u003cp\u003e\u003cstrong\u003eOregon 33-431 is a universal 4-post solenoid with a dual-mount bracket, external ground and spade converters, rated for 200 amp switching capacity.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct, high-capacity replacement for small engines and outdoor power equipment, the Oregon 33-431 solenoid combines a compact footprint with a robust 200A rating. The unit includes a dual mounting bracket with four posts and external ground connection plus spade converter fittings, so it adapts to a wide range of terminal styles and installation layouts. Built to meet or exceed original equipment standards, this solenoid simplifies repairs and reduces downtime when a reliable starter relay is needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this solenoid fit my equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon 33-431 is built for universal compatibility with common starter and accessory circuits. Its four-post dual-mount bracket offers flexible attachment points, and the terminal post with sleeve accepts both 1\/4\" and 5\/16\" terminal ends so it works with most cable sizes and connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-mount bracket fits a variety of chassis and mounting orientations\u003c\/li\u003e\n  \u003cli\u003eTerminal sleeve accepts 1\/4\" and 5\/16\" terminals without adapters\u003c\/li\u003e\n  \u003cli\u003eExternal ground with spade converters for easy wiring\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions ease retrofit into tight compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical capacity and duty cycle does it offer?\u003c\/h3\u003e\n\u003cp\u003eThis model is rated to handle up to 200 amps on a 15% duty cycle, making it suitable for frequent starter duty in lawn tractors, generators and similar equipment. The rating ensures the solenoid can carry high starter currents while providing reliable engagement under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e200 amp maximum switching capacity for heavy starter currents\u003c\/li\u003e\n  \u003cli\u003e15% duty cycle appropriate for intermittent starter use\u003c\/li\u003e\n  \u003cli\u003eRobust internal contacts reduce voltage drop during cranking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and wire the Oregon 33-431?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward thanks to the included spade converters and an external ground, which reduce the need for additional adapters. The combination of four mounting posts and universal terminal sizing means fewer compatibility issues during replacement jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpade converters included for quick connection to spade-style wiring\u003c\/li\u003e\n  \u003cli\u003eExternal ground simplifies grounding without altering chassis wiring\u003c\/li\u003e\n  \u003cli\u003eAccommodates common terminal sizes to minimize extra parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eOregon designs this solenoid to meet or exceed OEM specifications, offering dependable service life in outdoor power applications. The solid post contacts and sturdy mounting bracket help resist vibration and maintain consistent electrical contact over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty contact assembly for reliable performance under load\u003c\/li\u003e\n  \u003cli\u003eSecure four-post mounting to resist vibration and movement\u003c\/li\u003e\n  \u003cli\u003eQuality components intended for outdoor power equipment conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 33-431 solenoid is intended for owners, technicians and fleet managers who need a dependable, high-current replacement part for tractors, mowers, generators and similar small-engine equipment. If you want a straightforward retrofit with flexible mounting and terminal compatibility, this 200A, dual-mount solenoid is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Oregon 33-431 accept both 1\/4\" and 5\/16\" terminals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The terminal post and sleeve accept both 1\/4\" and 5\/16\" terminal ends without additional adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the amperage rating and duty cycle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The solenoid is rated for 200 amps with a 15% duty cycle, suitable for intermittent starter use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193741430968,"sku":"B0018U47VY","price":48.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-33-431-solenoid-front-mount.jpg?v=1790565064"},{"product_id":"oregon-10-chainsaw-chain-3-8-lp-050-gauge-39-drive-links-lubritec-low-kickback-semi-chisel","title":"Oregon 10\" Chainsaw Chain 3\/8\" LP .050\" Gauge 39 Drive Links — LubriTec Low-Kickback Semi-Chisel","description":"\u003cp\u003e\u003cstrong\u003eOregon's 10-inch AdvanceCut S39 chainsaw chain is a 3\/8\" low-profile, .050\" gauge, 39-drive-link replacement designed to deliver durable, low-kickback cutting and extended life through LubriTec oiling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement saw chain from Oregon fits a wide range of 10\" guide bars and is built for homeowners and landscape pros who need a reliable, low-maintenance chain for occasional to regular wood cutting. Heat-treated semi-chisel cutters slice efficiently through timber while a chrome outer finish and hardened rivets resist wear. The chain is engineered to meet ANSI B175.1-2012 kickback performance and works on saws up to roughly 42 cc.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my 10\" chainsaw?\u003c\/h3\u003e\n\u003cp\u003eFit depends on three measurements: pitch, gauge, and the number of drive links. This Oregon chain is 3\/8\" low-profile (LP) pitch, .050\" (1.3 mm) gauge, and contains 39 drive links — match those values to your old chain or owner's manual to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the number stamped on the drive link of your existing chain for exact match.\u003c\/li\u003e\n  \u003cli\u003eRefer to your chainsaw manual for guide bar length (measured from tip to where the bar enters the saw).\u003c\/li\u003e\n  \u003cli\u003eCompatible with many models that use a 10\" bar and 3\/8\" LP, .050\" gauge chains.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain reduce maintenance and wear?\u003c\/h3\u003e\n\u003cp\u003eOregon built this chain with features that lower the need for frequent adjustments and replacements. A chrome-plated outer layer slows material loss, and hardened rivets keep joints tight under load, so the chain stays true longer between services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome outer finish protects cutters and links from abrasion.\u003c\/li\u003e\n  \u003cli\u003eHardened rivets maintain tension and reduce stretch over time.\u003c\/li\u003e\n  \u003cli\u003eLubriTec oiling delivers consistent lubrication to critical parts for extended guide bar and chain life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cutting performance can I expect from the semi-chisel design?\u003c\/h3\u003e\n\u003cp\u003eThe semi-chisel cutter shape balances cutting speed and debris tolerance, making it easier to maintain sharpness when working on slightly dirty or knotted wood. It gives faster cuts than basic chipper styles while remaining less vulnerable to dulling than full-chisel cutters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-chisel cutters provide efficient wood removal with good durability.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated steel improves cutter lifespan under normal use.\u003c\/li\u003e\n  \u003cli\u003eWorks well for general pruning, limb removal, and small firewood jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this chain safe and certified?\u003c\/h3\u003e\n\u003cp\u003eThis Oregon chain meets kickback performance requirements outlined in ANSI B175.1-2012, offering a lower-kickback profile and reduced vibration to help minimize operator fatigue. As always, proper bar, chain, and saw matching plus safe operating practices are essential for safe use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to satisfy ANSI B175.1-2012 kickback performance standards.\u003c\/li\u003e\n  \u003cli\u003eLow-vibration, low-kickback construction helps reduce user fatigue.\u003c\/li\u003e\n  \u003cli\u003eRecommended for saws up to approximately 42 cc when used with the correct bar and drive specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon AdvanceCut S39 10\" replacement chain is aimed at homeowners, gardeners, and light-duty landscaping professionals who need a dependable, low-maintenance chain for pruning, limb clearing, and small firewood tasks. It’s a good match if your saw or guide bar requires a 3\/8\" LP pitch, .050\" gauge, and 39 drive links, and you want longer life from chrome-plated cutters and LubriTec-assisted lubrication.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this chain fits my saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the chain pitch (3\/8\" LP), gauge (.050\"), and drive link count (39) to the numbers stamped on your old chain or your owner's manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain require special lubrication?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special oil — use your saw's bar oil. LubriTec helps deliver oil to key points to extend chain and bar life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193753620664,"sku":"B000H5WU4W","price":50.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-advancecut-s39-front-packaging.jpg?v=1790565208"},{"product_id":"oregon-advancecut-12-chainsaw-chain-3-8-lp-050-gauge-45-links-lubritec-low-vibration","title":"Oregon AdvanceCut 12\" Chainsaw Chain — 3\/8\" LP, .050\" Gauge, 45 Links | LubriTec \u0026 Low Vibration","description":"\u003cstrong\u003eOregon AdvanceCut S45 is a replacement 12\" chainsaw chain with 3\/8\" low-profile pitch, .050\" gauge and 45 drive links designed for reliable cutting and reduced vibration.\u003c\/strong\u003e\n\n\u003cp\u003eThis 12-inch Oregon AdvanceCut saw chain is made for homeowners and landscape pros who need an easy-to-install, long-lasting chain that fits a wide range of 12\" guide-bar saws up to about 42 cc. It combines heat-treated semi-chisel cutters with Oregon’s LubriTec oiling engineering to reduce friction, extend guide-bar life and help control kickback and vibration. Use the drive-link stamp and your saw’s manual to confirm pitch and gauge before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws does this 12\" Oregon chain work with?\u003c\/h3\u003e\n\u003cp\u003eThe S45 chain is compatible with many electric, battery and small gas saws that accept a 12\" guide bar with 3\/8\" low-profile pitch and .050\" gauge. Popular models from Echo, Makita, Poulan and Sun Joe are covered, as well as several OEM replacement part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 12\" guide bars with 45 drive links\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models: Echo CS310, Makita XCU03\/XCU04, Poulan PR4218, Sun Joe SWJ698E\u003c\/li\u003e\n  \u003cli\u003eCross-references include Echo 91PX45CQ and select Husqvarna\/Stihl part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chain help with maintenance and lifespan?\u003c\/h3\u003e\n\u003cp\u003eOregon’s LubriTec oiling system helps deliver oil where the chain and bar need it most, lowering friction and wear. The chain’s heat-treated semi-chisel cutters resist dulling from debris, and the low-profile design reduces vibration for easier sharpening and longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubriTec improves bar and chain lubrication automatically\u003c\/li\u003e\n  \u003cli\u003eHeat-treated cutters for higher debris tolerance\u003c\/li\u003e\n  \u003cli\u003eLow-profile design simplifies sharpening and reduces kickback tendency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the S45 safe and easy to install for casual users?\u003c\/h3\u003e\n\u003cp\u003eThe S45 is engineered to meet ANSI B175.1-2012 kickback performance requirements and is sized so most DIYers can swap it in without specialist tools. Always match the drive-link stamp and follow your saw manual for correct tensioning and installation steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets ANSI B175.1-2012 kickback performance standards\u003c\/li\u003e\n  \u003cli\u003e45 drive links for a standard 12\" guide bar fit\u003c\/li\u003e\n  \u003cli\u003eSimple tensioning and routine sharpening for home users\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon AdvanceCut S45 is aimed at homeowners, hobbyists and landscaping professionals who use small to mid-size chainsaws for pruning, firewood and yard cleanup. If you own a 12\" bar saw up to roughly 42 cc and want a low-vibration, easy-maintenance chain with improved lubrication and durable cutters, this chain is a practical replacement option. Always verify drive link markings and consult your owner’s manual when selecting a replacement chain to ensure a proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know this chain fits my saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the stamped drive-link number, pitch (3\/8\" LP) and gauge (.050\") with your saw manual or old chain to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this chain on electric and gas saws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits many electric, battery and small gas saws that accept a 12\" bar with 3\/8\" low-profile pitch.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193801625784,"sku":"B00004RA8F","price":52.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-advancecut-front-packaging.jpg?v=1790565881"},{"product_id":"oregon-3-16-chainsaw-file-guide-kit-with-two-files-angle-etched-frame-for-consistent-sharpening","title":"Oregon 3\/16\" Chainsaw File Guide Kit with Two Files — Angle-etched Frame for Consistent Sharpening","description":"\u003cp\u003e\u003cstrong\u003eOregon 25896 is a 3\/16\" chainsaw file guide kit that secures the file at the correct angle and depth so you can sharpen chain cutters consistently and accurately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your chainsaw cutting at its best with a compact, easy-to-use guide from Oregon. This 3\/16\" file guide includes two premium files and a frame etched with angle indicators and alignment lines, removing the guesswork from hand sharpening. The lightweight guide grips the file, sets the depth, and helps you reproduce the factory cutting angle, extending chain life and restoring cutting performance between professional sharpenings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this guide improve sharpening accuracy?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon file guide locks the round file in a stable position and shows angle markers so you maintain the proper filing plane. That stability prevents wandering strokes and uneven cutter angles, producing more uniform teeth across the chain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFrame with etched lines for consistent file alignment\u003c\/li\u003e\n  \u003cli\u003eAngle indicators printed on the guide for correct filing tilt\u003c\/li\u003e\n  \u003cli\u003eSecure file grip to eliminate lateral movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size chain is this 3\/16\" kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for chains that require a 3\/16\" (4.8 mm) round file—commonly found on many homeowner and light-duty chains. Confirm your chain’s specification in the owner's manual or stamped on the cutter to ensure a match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits chains specified for 3\/16\" round files\u003c\/li\u003e\n  \u003cli\u003eBest for common homeowner and small professional chains\u003c\/li\u003e\n  \u003cli\u003eIncludes two files to cover routine sharpening needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the guide to get consistent results?\u003c\/h3\u003e\n\u003cp\u003eSeat the correct file in the guide, rest the guide on the top plate of the chain, and follow the angle marks while drawing smooth strokes. Use light, even pressure and count strokes to match each cutter on the bar for uniformity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlace guide on the cutter’s top plate and align with etched lines\u003c\/li\u003e\n  \u003cli\u003eHold guide steady, push file forward across the cutter with even strokes\u003c\/li\u003e\n  \u003cli\u003eMatch stroke count and pressure across all cutters for balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how does it save time and money?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon 25896 kit contains the durable filing guide and two premium round files, letting you perform quick touch-ups without removing the chain from the bar. Regular, accurate hand sharpening reduces the frequency of professional sharpening and helps maintain cutting efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne guided filing frame with angle markings\u003c\/li\u003e\n  \u003cli\u003eTwo premium 3\/16\" round files for immediate use\u003c\/li\u003e\n  \u003cli\u003eSimple setup for quick on-the-job touch-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Oregon 25896 3\/16\" file guide and files is ideal for homeowners, arborists, landscapers, and anyone who performs routine chainsaw upkeep. If you want to keep a chainsaw cutting sharply between shop visits, reduce wasted fuel and time, and learn a reliable hand-sharpening technique, this compact kit offers an accurate, affordable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this guide on any chainsaw chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use it only on chains specified for a 3\/16\" (4.8 mm) round file; check your chain specs before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include files?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Oregon 25896 includes the file guide plus two premium 3\/16\" round files.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193804542136,"sku":"B00004RA77","price":42.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-file-guide-front-view.jpg?v=1790565976"},{"product_id":"oregon-10-chainsaw-chain-3-8-lp-050-gauge-40-link-low-kickback-replacement-for-mini-pole-saws","title":"Oregon 10\" Chainsaw Chain 3\/8\" LP .050\" Gauge 40-Link — Low-Kickback Replacement for Mini \u0026 Pole Saws","description":"\u003cp\u003e\u003cstrong\u003eOregon's 10\" chainsaw chain is a replacement 3\/8\" low-profile saw chain with a .050\" gauge and 40 drive links engineered for compact saws and pole saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace a worn or damaged chain with a purpose-built Oregon unit designed for small bar applications. This chain fits many popular mini and pole-saw models from brands such as Greenworks, Echo, Poulan, Craftsman, Remington, Worx and others. Built with low-kickback geometry and the experience of a manufacturer that pioneered modern chain design, it balances cutting performance and operator safety for light-duty pruning, limb removal, and general yard maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and bar sizes will this chain work with?\u003c\/h3\u003e\n\u003cp\u003eThis chain is intended for saws using a 10-inch guide bar and requiring 3\/8\" low-profile pitch, .050\" gauge, with 40 drive links. Always confirm your saw’s manual and the bar slot measurement before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 10\" (25 cm) bars and compatible pole-saw adapters\u003c\/li\u003e\n  \u003cli\u003eDesigned for saws that specify 3\/8\" LP pitch and .050\" (1.3 mm) gauge\u003c\/li\u003e\n  \u003cli\u003eContains exactly 40 drive links for matched fitment\u003c\/li\u003e\n  \u003cli\u003eCompatible with many models from Greenworks, Echo, Craftsman, Poulan, Remington, Worx, Sun Joe and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the low-kickback design impact everyday cutting?\u003c\/h3\u003e\n\u003cp\u003eThe chain uses a bumper drive link and depth-gauge geometry that reduces the risk of sudden kickback while keeping efficient chip removal and steady feed. It’s targeted at homeowners and weekend users who need safer, predictable cutting during pruning and light felling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBumper drive link reduces engaging bite at the nose of the bar\u003c\/li\u003e\n  \u003cli\u003eDepth gauge profile limits aggressive bite to control kickback potential\u003c\/li\u003e\n  \u003cli\u003eStill supports clean, even cutting on small limbs and brush\u003c\/li\u003e\n  \u003cli\u003eTested to meet ANSI B175.1-2012 kickback performance provisions and CSA Z62.3 low-kickback requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and fit checks should I perform before installing?\u003c\/h3\u003e\n\u003cp\u003eInspect the bar and sprocket, match the drive link count, and verify the bar slot width. Proper chain tension, regular sharpening, and lubrication extend service life and ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm 40 drive links and .050\" guide slot width in the bar\u003c\/li\u003e\n  \u003cli\u003eCheck sprocket condition and bar groove wear before installation\u003c\/li\u003e\n  \u003cli\u003eUse correct chain tension and bar oil during operation\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters regularly or replace the chain when dull or damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for?\u003c\/p\u003e\n\u003cp\u003eThis Oregon chain is aimed at homeowners, gardeners, and light-duty landscaping pros who use compact chainsaws or pole saws with 10\" bars. It’s a practical replacement part for anyone who prioritizes compatibility, reliable cutting performance, and reduced kickback risk in pruning, storm cleanup, and routine yard care. If you’re unsure about fit, double-check your saw’s owner manual or the bar specifications before ordering to ensure proper match and safe operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Oregon chain compatible with my 10\" Greenworks saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Greenworks model specifies a 10\" bar, 3\/8\" LP pitch, .050\" gauge and 40 drive links—verify your manual first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain reduce kickback?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a bumper drive link and depth-gauge profile to lower kickback risk and meets ANSI B175.1 and CSA Z62.3 performance provisions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54193817059512,"sku":"B00004RA8I","price":48.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-front-packaging-10in-chain.jpg?v=1790566438"},{"product_id":"oregon-chainsaw-chain-for-8-inch-bar-3-8-inch-lp-050-gauge-33-drive-links-advancecut-low-kickback","title":"Oregon Chainsaw Chain for 8-inch Bar, 3\/8-inch LP .050 Gauge — 33 Drive Links, AdvanceCut Low-Kickback","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon S33 is a replacement AdvanceCut chainsaw chain sized for 8\" guide bars (3\/8\" low-profile pitch, .050\" gauge, 33 drive links) engineered for pole saws and small chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct-fit replacement chain for an 8-inch bar, the Oregon S33 provides the correct pitch, gauge and link count for many electric and battery-powered pole saws as well as small gas units. It’s built with Oregon’s LubriTec oiling compatibility and a low-vibration, low-kickback profile designed to extend component life while improving controllability when trimming branches or doing light cutting tasks.\u003c\/p\u003e\n\n\u003ch3\u003eWhich tools and models will this chain fit?\u003c\/h3\u003e\n\u003cp\u003eThe S33 is intended for tools that accept an 8\" guide bar with a 3\/8\" low-profile pitch and .050\" (1.3 mm) gauge, using 33 drive links. It covers a wide range of electric and battery pole saw models plus some compact gas saws, making it a versatile replacement option.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Greenworks PSPH40B00 and similar Greenworks pole saws.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Sun Joe models SWJ800E, SWJ801E, SWJ806E.\u003c\/li\u003e\n  \u003cli\u003eWorks with Wen telescoping pole saws (4019, 4021) and many Kobalt, Chicago, Earthwise units.\u003c\/li\u003e\n  \u003cli\u003eServes as replacement for Husqvarna H37-33 and Stihl 63PM333E part references.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chain improve performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eOregon’s AdvanceCut design balances cutting efficiency with reduced vibration and lower kickback compared to more aggressive tooth profiles. The chain’s construction and compatibility with LubriTec oiling help maintain lubrication along the bar and chain interface to reduce friction and wear during routine use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanceCut tooth geometry for consistent, smooth cuts with less vibration.\u003c\/li\u003e\n  \u003cli\u003eLubriTec-friendly for improved automatic oiler performance and reduced wear.\u003c\/li\u003e\n  \u003cli\u003e.050\" gauge and 3\/8\" LP pitch for common pole saw setups and easy tensioning.\u003c\/li\u003e\n  \u003cli\u003e33 drive links sized for 8\" guide bars to ensure proper engagement and feed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this chain safe and easy to install on a pole saw?\u003c\/h3\u003e\n\u003cp\u003eThe S33 is designed with a lower kickback profile and reduced vibration in mind, but safe operation depends on correct installation and following the manufacturer’s instructions for your saw. Installation is straightforward for anyone familiar with chainsaw maintenance — align the drive links, seat the chain on the sprocket and adjust tension per your owner’s manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-kickback design reduces reactive forces when cutting small limbs.\u003c\/li\u003e\n  \u003cli\u003eStandard 33-drive-link layout makes it simple to match to an 8\" bar.\u003c\/li\u003e\n  \u003cli\u003eRequires correct tensioning and chain brake\/guard checks before use.\u003c\/li\u003e\n  \u003cli\u003eConsult your pole saw’s manual for sprocket and bar compatibility details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon S33 chain is ideal for homeowners and landscaping pros who use electric or battery pole saws and small chainsaws with 8\" bars and who want a drop-in replacement that emphasizes longevity and smoother cutting. It suits users who value consistent lubrication performance (LubriTec-compatible), reduced vibration, and compatibility across many popular makes and models including Greenworks, Sun Joe, Wen, Kobalt, and others.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 8\" Greenworks pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your Greenworks model uses an 8\" bar with 3\/8\" LP pitch and .050\" gauge and requires 33 drive links, the S33 will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this chain with a chainsaw up to 42cc?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Oregon S33 is suitable for chainsaw and pole saw applications up to about 42cc when bar and sprocket specs match.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194066751672,"sku":"B01HB81C7S","price":49.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-s33-front-packaging.jpg?v=1790568900"},{"product_id":"oregon-chainsaw-chain-for-16-bar-3-8-lp-pitch-050-gauge-55-drive-links-reduced-kickback","title":"Oregon chainsaw chain for 16\" bar — 3\/8\" LP pitch, .050\" gauge, 55 drive links, reduced kickback","description":"\u003cp\u003e\u003cstrong\u003eThis Oregon replacement chainsaw chain fits 16\" bars with a 3\/8\" low-profile pitch, .050\" (.0013 m) gauge and 55 drive links for reliable cutting and reduced kickback.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your saw needs a fresh loop of cutters, choosing the right chain matters for fit, control and safety. This Oregon chain is engineered to match many popular homeowner and light-pro saws that use a 3\/8\" low-profile pitch and a .050\" guide bar slot. It combines durable cutter teeth with a bumper drive link and depth-gauge geometry intended to lower kickback while preserving cutting power.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this chain fits my chainsaw?\u003c\/h3\u003e\n\n\u003cp\u003eDouble-check four measurements on your saw before ordering: bar length, pitch, gauge (guide bar slot), and the total number of drive links. You can find these specs stamped on the bar, printed in the operator’s manual, or listed on your saw’s model placard. If any spec differs, select a chain specifically sized for that configuration.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBar length: 16 inches (matches this chain)\u003c\/li\u003e\n  \u003cli\u003ePitch: 3\/8\" low-profile (check bar or manual)\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" (1.3 mm) guide bar slot\u003c\/li\u003e\n  \u003cli\u003eDrive links: 55 total links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich saw makes and models are compatible with this Oregon chain?\u003c\/h3\u003e\n\n\u003cp\u003eThis chain is designed to fit many consumer and light-duty saws from major manufacturers. It commonly fits older and current models from Stihl, Craftsman, McCulloch, Troy-Bilt, Wen, Mastercraft and Lumberjack that use the listed pitch, gauge and drive link count. Always verify the exact model number against your saw’s specifications before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCraftsman model examples: 316.34107, 358.34119, 41532, 41534, 41536\u003c\/li\u003e\n  \u003cli\u003eMcCulloch examples: multiple Eager Beaver models including 12ES–16ES\u003c\/li\u003e\n  \u003cli\u003eStihl examples: 009, 010–021 series and small MS models (e.g., MS 170–MS 180)\u003c\/li\u003e\n  \u003cli\u003eOther fits: Troy-Bilt TB3516\/TB4516CC, Wen 6014\/6016, Mastercraft older models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety or performance features does this chain include?\u003c\/h3\u003e\n\n\u003cp\u003eThe chain uses a bumper drive link combined with a depth-gauge profile to reduce the severity of kickback without sacrificing effective cutting action. It metkickback performance requirements under ANSI B175.1-2012 when tested and complies with CSA Z62.3 kickback standards. The cutter design balances durability and maintainability for typical homeowner woodcutting tasks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBumper drive link and reduced depth-gauge to lower kickback force\u003c\/li\u003e\n  \u003cli\u003eEngineered cutters for consistent chip removal and edge life\u003c\/li\u003e\n  \u003cli\u003eManufactured to Oregon quality standards—designed and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this replacement chain?\u003c\/h3\u003e\n\n\u003cp\u003eMounting is the same as other rivet-style saw chains: align the drive links into the bar groove, fit the chain around the sprocket, then tension per the saw maker’s directions. Keep the chain sharpened at the recommended angles, check tension frequently, and keep the bar groove and oiling system clean for consistent feed and wear control. Use proper PPE and follow the operator manual for safe handling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTension to factory specification when the bar is warm and the chain is cold\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters with the correct file diameter and angle\u003c\/li\u003e\n  \u003cli\u003eLubricate with bar and chain oil; inspect sprocket and bar rail wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon 16\" replacement chain is aimed at homeowners and weekend sawyers with small to mid-size chainsaws (up to about 42cc) who need an OEM-quality swap for routine cutting, pruning and firewood work. If your saw uses a 3\/8\" low-profile pitch, .050\" gauge and 55 drive links, this chain is a direct, safety-conscious option; if not, measure your saw and select the proper size instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit a 16\" bar on my Stihl MS 170?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your MS 170 uses 3\/8\" low-profile pitch, .050\" gauge and 55 drive links, this Oregon chain will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain reduce kickback?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The bumper drive link and depth-gauge design are intended to lower kickback risk and meet ANSI\/CSA kickback standards.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194167972024,"sku":"B00004RA8A","price":51.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-packaging.jpg?v=1790570513"},{"product_id":"oregon-12-chainsaw-chain-3-8-low-profile-for-12-bar-043-gauge-45-drive-links-low-kickback","title":"Oregon 12\" Chainsaw Chain — 3\/8\" Low-Profile for 12\" Bar, .043\" Gauge, 45 Drive Links, Low-Kickback","description":"\u003cp\u003e\u003cstrong\u003eOregon 12\" chainsaw chain: a 3\/8\" low-profile, .043\" gauge, 45-drive-link replacement designed for 12-inch bars that balances cutting performance with low-kickback safety.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain from Oregon is built to fit many popular light-duty and consumer chainsaws that call for a 3\/8\" low-profile pitch, .043\" (1.1 mm) gauge, 45 drive link configuration for a 12\" bar. Oregon engineered this chain to meet recognized safety performance requirements for reduced kickback, while providing the cutting geometry and materials expected from the company that pioneered modern saw chain technology. Before purchase, confirm your saw’s manual for pitch, gauge, drive link count, and bar length to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saw models will this Oregon chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis chain fits a wide range of electric and small petrol saw models that use a 12\" bar with 3\/8\" low-profile pitch and .043\" gauge at 45 drive links. The product page lists many matched models across brands; compare your chainsaw part specifications to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon compatible brands: Black \u0026amp; Decker, Craftsman, DeWalt, Husqvarna, Worx, RIGID, Ryobi, Makita.\u003c\/li\u003e\n  \u003cli\u003eExample models include: Black \u0026amp; Decker LCS1240, Craftsman 98023\/CMCCS620 series, DeWalt DCCS620 series.\u003c\/li\u003e\n  \u003cli\u003eAlso fits select Husqvarna 436\/536 LIXP and many Worx, RIGID, Ryobi, Makita compact saws.\u003c\/li\u003e\n  \u003cli\u003eAlways double-check pitch (3\/8\" LP), gauge (.043\"), drive link count (45), and bar length (12\").\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chain reduce kickback while keeping cutting power?\u003c\/h3\u003e\n\u003cp\u003eOregon’s low-kickback design pairs a bumper-style drive link with a conservative depth gauge to limit aggressive bite at the nose, reducing the likelihood of sudden kickback. The cutter profile still removes wood efficiently across common homeowner and jobsite tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBumper drive link and depth gauge combination reduces tip reaction.\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI B175.1-2012 kickback performance testing provisions.\u003c\/li\u003e\n  \u003cli\u003eDesigned for reliable cutting in pruning, limbing, and light felling.\u003c\/li\u003e\n  \u003cli\u003eEngineered to balance safety with sustained chip flow for smooth cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and installation steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eInstalling and maintaining the chain correctly extends life and keeps cutting consistent. Use the chainsaw manual for tensioning, lubrication, and torque specifications; use protective gloves and follow safety procedures when changing the chain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify fit by matching pitch, gauge, drive links, and bar length before installing.\u003c\/li\u003e\n  \u003cli\u003eTension the chain hot by running briefly and re-tensioning per manufacturer guidance.\u003c\/li\u003e\n  \u003cli\u003eKeep the bar nose and sprocket properly lubricated; file or sharpen cutters as needed.\u003c\/li\u003e\n  \u003cli\u003eReplace the chain if teeth are damaged, unevenly worn, or if tooth height drops below service limits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose Oregon for a replacement chain?\u003c\/h3\u003e\n\u003cp\u003eOregon has produced saw chains since 1947 and designs chains with a focus on fit, cutting performance, and consistent manufacturing quality. Buying an OEM-compatible Oregon chain helps ensure compatibility and predictable performance with many consumer saw models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong history in chain design and manufacturing since 1947.\u003c\/li\u003e\n  \u003cli\u003eProduced to match common consumer saw specifications and safety standards.\u003c\/li\u003e\n  \u003cli\u003eWidely available sizes and configurations for light-duty and homeowner saws.\u003c\/li\u003e\n  \u003cli\u003eBacked by clear fit guidance to avoid misfit and performance issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon 12\" 3\/8\" low-profile .043\" gauge chain is aimed at homeowners, gardeners, and light-contractors who run compact electric or small-petrol chainsaws that require 45 drive links and a 12\" bar. It’s a practical replacement for routine pruning, limbing, and small-fall tasks when you need a reliable, low-kickback chain that fits many popular saw models. Always confirm your saw’s specification sheet before ordering to ensure a correct match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 12-inch Ryobi or Makita saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your saw uses a 3\/8\" low-profile pitch, .043\" gauge, and 45 drive links it will fit. Check the saw manual to confirm those specs first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain classified as low-kickback?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This chain meets ANSI B175.1-2012 kickback performance provisions and is designed for reduced kickback.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194212438200,"sku":"B01D230BNM","price":48.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-front-packaging-12in-chain.jpg?v=1790571251"},{"product_id":"oregon-lawn-mower-deck-leveling-gauge-universal-small-engine-gauge-handheld-durable-tool-for-even-cuts","title":"Oregon lawn mower deck leveling gauge — universal small-engine gauge, handheld durable tool for even cuts","description":"\u003cstrong\u003eThe Oregon Universal Small Engine Deck Leveling Gauge is a handheld tool that helps you quickly and accurately level your lawnmower deck for a more even cut.\u003c\/strong\u003e\n\n\u003cp\u003eKeeping a mower deck level is one of the simplest ways to improve cut quality and extend blade life. The Oregon gauge gives DIYers and professionals an easy reference to set blade heights and side-to-side deck pitch without guesswork. Built from durable materials for repeated garage use, the gauge fits a broad range of push and riding mowers and saves time during seasonal tune-ups and routine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the gauge help me get an even lawn quickly?\u003c\/h3\u003e\n\u003cp\u003eThe gauge provides fixed reference points to compare blade tips and deck mounting points so you can adjust linkages and spindles to a consistent height. That reduces scallops, missed strips, and uneven grass length across the cutting width.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the gauge at multiple blade positions to confirm same height across the deck.\u003c\/li\u003e\n  \u003cli\u003eSaves repeated trial-and-error adjustments when setting deck pitch.\u003c\/li\u003e\n  \u003cli\u003eQuick visual check before mowing to catch misaligned blades or bent spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mowers will this universal gauge work with?\u003c\/h3\u003e\n\u003cp\u003eOregon designed the gauge for broad compatibility with most residential and many commercial lawnmowers. It’s intended to work with common deck designs and blade styles so you don’t need a model-specific tool for routine leveling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many push mowers, zero-turns, and lawn tractors with standard blade mounts.\u003c\/li\u003e\n  \u003cli\u003eUseful for decks where blade-tip-to-deck measurements are adjustable.\u003c\/li\u003e\n  \u003cli\u003eNot dependent on proprietary attachments—handheld and portable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to use is the tool?\u003c\/h3\u003e\n\u003cp\u003eThe gauge is built from sturdy materials to resist garage wear and provide consistent reference measurements. Its simple form factor requires no assembly—just align it to blade or deck points and read the difference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo assembly required—ready out of the box.\u003c\/li\u003e\n  \u003cli\u003eSolid construction for long-term, repeatable measurements.\u003c\/li\u003e\n  \u003cli\u003eLightweight and compact for storage in a toolbox or mower compartment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat adjustments should I make after leveling with this gauge?\u003c\/h3\u003e\n\u003cp\u003eAfter you establish the correct blade heights and deck pitch, tighten fasteners and recheck to make sure settings held. Regularly inspect blades for wear or damage, as damaged blades will offset any correct deck alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTighten spindle nuts, deck mounting bolts, and linkage fasteners after adjustment.\u003c\/li\u003e\n  \u003cli\u003eReplace or balance worn blades to maintain even cutting after leveling.\u003c\/li\u003e\n  \u003cli\u003eRe-verify measurements after test mowing and minor tweaks as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon Universal Small Engine Deck Leveling Gauge is ideal for homeowners who maintain their own lawn equipment, lawn-care professionals who need a quick, portable leveling reference, and small-engine repair shops that want a reliable, no-fuss tool for deck setup. If you want faster, more consistent deck adjustments and fewer returns for uneven cutting, this simple gauge is a practical addition to your mower maintenance kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to use this gauge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the Oregon gauge requires no additional tools—just position it against blades or deck points for measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this gauge fix a bent blade?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it helps set deck height and pitch; bent blades must be replaced or repaired separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194292359352,"sku":"B00TM8WJM8","price":47.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-deck-gauge-front.jpg?v=1790573143"},{"product_id":"oregon-095-heavy-duty-round-trimmer-line-288-ft-1-lb-donut-spool-co-polymer-impact-resistant-green","title":"Oregon .095\" Heavy Duty Round Trimmer Line 288 ft — 1 lb donut spool, co-polymer impact-resistant green","description":"\u003cp\u003e\u003cstrong\u003eOregon Round .095\" x 288' Heavy Duty Trimmer Line is a universal, impact-resistant replacement cord made from premium co-polymer for neat, tangle-free edging and weed control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace worn-out string quickly with a durable spool designed for everyday yard care. This 288-foot, 1-pound donut spool supplies a long run of .095\" round line that fits most standard trimmer heads — fixed, semi-auto, and bump-feed — and works on gas, battery, and electric machines. The green, round profile is engineered to balance cutting versatility with resistance to fraying and welding, while the compact spool keeps the line stored without tangles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this trimmer line perform on regular mowing and edging jobs?\u003c\/h3\u003e\n\u003cp\u003eThe round cross-section delivers consistent cutting power across grass, light weeds, and small undergrowth without aggressive tearing. It offers a balance of flexibility and impact resistance, making it suitable for routine lawn maintenance and clearing around garden beds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRound shape for broad compatibility with common cutting tasks\u003c\/li\u003e\n  \u003cli\u003e.095\" gauge provides sturdiness for everyday yard work\u003c\/li\u003e\n  \u003cli\u003ePremium co-polymer resists fraying in mixed vegetation\u003c\/li\u003e\n  \u003cli\u003eGreen color helps locate used ends quickly while trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this spool fit my trimmer head and how easy is it to install?\u003c\/h3\u003e\n\u003cp\u003eYes—this line is designed to be universal and fits most standard trimmer heads, including bump-feed, semi-automatic, and fixed-line systems. The donut-style spool is compact and prevents tangling, so reloading is straightforward and fast.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many popular brands and models (e.g., Stihl, Ryobi, Husqvarna)\u003c\/li\u003e\n  \u003cli\u003eDonut spool reduces line twists and simplifies feed-in steps\u003c\/li\u003e\n  \u003cli\u003eWorks with both gas and electric trimmers for versatile use\u003c\/li\u003e\n  \u003cli\u003eLong 288' length minimizes how often you need to replace it\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the line in different weather and rough conditions?\u003c\/h3\u003e\n\u003cp\u003eThe co-polymer formulation improves impact resistance and reduces the tendency of the line to weld or melt under heat and friction. While no line is indestructible, this product is engineered to withstand routine contact with hard surfaces and perform reliably in wet or dry conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality nylon blend resists heat-related welding\u003c\/li\u003e\n  \u003cli\u003eDesigned to limit fraying for longer usable life\u003c\/li\u003e\n  \u003cli\u003ePerforms well in rain or sun for typical homeowner use\u003c\/li\u003e\n  \u003cli\u003eEconomical option for frequent trimming needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much line do I get and what makes the spool user-friendly?\u003c\/h3\u003e\n\u003cp\u003eThis pack contains one 1 lb spool with 288 feet of .095\" trimmer line, giving you ample length before replacement. The donut-style format keeps the cord organized and prevents kinks so installation and storage stay tidy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e288 feet per spool reduces reorders and downtime\u003c\/li\u003e\n  \u003cli\u003e1 lb size fits most storage spaces and tool boxes\u003c\/li\u003e\n  \u003cli\u003eDonut spool design reduces tangles and simplifies loading\u003c\/li\u003e\n  \u003cli\u003eAffordable, economy-friendly choice for homeowners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners, gardeners, and DIYers who need a reliable, easy-to-install trimmer line for routine lawn care will find this Oregon spool convenient and cost-effective. If you require heavy commercial cutting for dense brush or frequent professional use, consider Oregon’s specialized Gatorline series; otherwise, this .095\" round line is a practical match for most backyard and light landscape tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this line work with my bump-feed trimmer head?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The .095\" Oregon round line is compatible with most standard bump-feed heads and other common head types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long will one spool last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 288-foot, 1 lb spool lasts multiple trimming sessions; actual life depends on vegetation density and contact with hard surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194322702520,"sku":"B07D1DMK7C","price":46.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-round-095-front-spool.jpg?v=1790573639"},{"product_id":"oregon-6in-chainsaw-chain-3-8in-lp-043in-gauge-28-drive-links-advancecut-low-vibration-narrow-kerf","title":"Oregon 6in Chainsaw Chain — 3\/8in LP .043in Gauge, 28 Drive Links, AdvanceCut Low‑Vibration Narrow‑Kerf","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon AdvanceCut R28 is a 6-inch replacement chainsaw chain with 3\/8\" low-profile pitch, .043\" gauge and 28 drive links designed for small pole saws and compact chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis lightweight, high-efficiency chain is built for battery and low-displacement gasoline saws, giving landscapers and homeowners a durable cutting option that requires less power than standard chains. It combines narrow-kerf geometry, low-vibration micro-chisel cutters and Oregon's LubriTec oiling design for improved cutting efficiency, easier sharpening and extended bar life.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and bars will this 6\" R28 chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis chain is sized for 6-inch guide bars and is compatible with many pole saws and compact chainsaws rated up to about 42cc. Always match the drive link count, pitch and gauge stamped on your old chain or listed in your owner’s manual to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 6\" (15 cm) guide bars with 28 drive links\u003c\/li\u003e\n  \u003cli\u003ePitch: 3\/8\" low profile (3\/8\" LP); Gauge: .043\" (narrow kerf)\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models: select Craftsman, Milwaukee, Remington, Black+Decker, Ryobi, Worx pole saws\u003c\/li\u003e\n  \u003cli\u003eRecommended for saws up to ~42 cc and most narrow-kerf bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the narrow .043\" gauge help performance?\u003c\/h3\u003e\n\u003cp\u003eThe narrow kerf (.043\" gauge) reduces the amount of wood removed per cut, which lowers friction and demand on the motor. This improves battery runtime and cutting speed on compact saws while retaining a durable cutting edge for regular yard and light commercial work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLess power required for each cut — good for battery and low-power saws\u003c\/li\u003e\n  \u003cli\u003eReduced drag on bar and motor for longer runtime and smoother cutting\u003c\/li\u003e\n  \u003cli\u003eWorks only with narrow-kerf guide bars for optimal chain seating\u003c\/li\u003e\n  \u003cli\u003eMaintains cutting performance with proper sharpening and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and maintenance features are included?\u003c\/h3\u003e\n\u003cp\u003eOregon designed this chain with low-kickback micro-chisel cutters and top-plate filing indicators to make sharpening more accurate and safe. The chain also meets ANSI and CSA recoil performance standards for added peace of mind when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-vibration micro-chisel cutters reduce kickback risk and operator fatigue\u003c\/li\u003e\n  \u003cli\u003eTop-plate filing indicators simplify consistent sharpening angles\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI B175.1-2012 and CSA Z62.3 kickback performance requirements\u003c\/li\u003e\n  \u003cli\u003eLubriTec oiling system compatibility helps extend guide bar and chain life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I identify the correct replacement chain?\u003c\/h3\u003e\n\u003cp\u003eConfirm the chain by checking the numbers stamped on your drive link or by consulting your tool’s owner manual. Match pitch, gauge and drive link count exactly — those three measurements determine compatibility more than the brand name.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck drive link stamp for pitch and gauge codes before ordering\u003c\/li\u003e\n  \u003cli\u003eMeasure guide bar length from tip to where it enters the saw body to confirm 6\" compatibility\u003c\/li\u003e\n  \u003cli\u003eUse narrow-kerf bars only with .043\" gauge chains\u003c\/li\u003e\n  \u003cli\u003eRefer to Oregon’s fitting guide for visual help if uncertain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon AdvanceCut R28 6\" chain suits homeowners, gardeners and light commercial users who run compact or battery-powered pole saws and small chainsaws. It’s an excellent spare or replacement for anyone needing a low-kickback, energy-efficient chain that sharpens easily and helps prolong bar life when paired with narrow-kerf guide bars.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit any 6\" guide bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 6\" bars only if the bar is narrow-kerf and your saw uses 3\/8\" LP pitch with a .043\" gauge and 28 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this chain on battery pole saws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the narrow kerf and low-profile pitch reduce power demand, making it well suited for battery and low-displacement saws.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194345279672,"sku":"B000BQWU06","price":44.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-packaging_d50f2d27-7f5b-499d-aef7-06d63138b3e8.jpg?v=1790573984"},{"product_id":"oregon-14-chainsaw-chain-3-8-lp-050-gauge-52-drive-links-low-kickback","title":"Oregon 14\" Chainsaw Chain — 3\/8\" LP, .050\" Gauge, 52 Drive Links, Low-Kickback","description":"\u003cp\u003e\u003cstrong\u003eOregon 14\" chainsaw chain for 3\/8\" low-profile pitch, .050\" (1.3 mm) gauge, 52 drive links — engineered to fit 14\" bars and deliver reduced kickback performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain is built to match chainsaw models that specify a 3\/8\" low-profile pitch with a .050\" gauge and 52 drive links. It’s sold as an aftermarket-quality Oregon chain, designed and engineered by the company known for modern saw chain development. Before ordering, confirm your saw’s bar length, drive link count, pitch and gauge to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exact specifications does this chain use?\u003c\/h3\u003e\n\u003cp\u003eThe chain is made for a 14\" (35 cm) guide bar, 3\/8\" low-profile pitch (LP), and a .050\" (1.3 mm) gauge with 52 drive links. These measurements determine if the chain will seat correctly in your bar and sprocket and provide safe, reliable cutting performance when installed and tensioned properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBar length compatibility: 14\" \/ 35 cm\u003c\/li\u003e\n  \u003cli\u003ePitch: 3\/8\" low-profile (LP)\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" (1.3 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive links: 52\u003c\/li\u003e\n  \u003cli\u003eSuitable for many engines up to about 42cc (check manual)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich chainsaw brands and models will this chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis Oregon chain fits numerous popular consumer and light-professional saws when they use the same pitch, gauge and link count. The listing includes many Echo, Greenworks, Homelite, Ryobi, Earthwise, Cub Cadet and Dolmar models — always cross-reference your owner’s manual or the bar stamping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEcho models: CS-2511T, CS-280, CS-290, CS-300, CS-3000, CS-301\u003c\/li\u003e\n  \u003cli\u003eGreenworks 9A and 12A electric series and related part numbers\u003c\/li\u003e\n  \u003cli\u003eHomelite series: 20, 23, 3300 series, 3350, 3550 and others cited\u003c\/li\u003e\n  \u003cli\u003eRyobi, Earthwise, Cub Cadet and select Dolmar saws when specs match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain reduce kickback and perform on the job?\u003c\/h3\u003e\n\u003cp\u003eThe chain uses a low-kickback design that pairs bumper drive links with reduced-profile cutters and depth gauges to lower the chance of a violent reactive motion. It passed ANSI kickback performance testing and aligns with CSA low-kickback requirements when tested to their respective standards, offering a safer balance of control and cutting efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-kickback cutter geometry for reduced reactive forces\u003c\/li\u003e\n  \u003cli\u003eBumper drive links improve engagement with the bar slot\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet ANSI B175.1-2012 kickback performance testing\u003c\/li\u003e\n  \u003cli\u003eMeets CSA Z62.3 low-kickback saw chain provisions when tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should you check before installing this chain?\u003c\/h3\u003e\n\u003cp\u003eVerify the bar length, drive link count, pitch and gauge on your saw before purchase; incorrect sizing is the most common cause of fit problems. Also inspect the bar slot and sprocket condition — worn parts can shorten chain life and affect cutting performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm bar length is 14\" and drive link count is 52\u003c\/li\u003e\n  \u003cli\u003eMatch pitch (3\/8\" LP) and gauge (.050\") to the bar and sprocket\u003c\/li\u003e\n  \u003cli\u003eReplace worn bars or sprockets to prevent premature chain wear\u003c\/li\u003e\n  \u003cli\u003eSet correct tension and lubricate bar and chain before first use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon chain is aimed at homeowners, landscapers and light-duty professionals with chainsaws that require a 3\/8\" low-profile, .050\" gauge chain with 52 drive links on a 14\" bar. It’s suitable for users who want an OEM-engineered replacement for routine cutting tasks including pruning, limb removal and firewood processing — provided the chain specification matches the saw. If you’re unsure about fit, check the tool manual or the bar stamping, or consult a qualified service technician before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 14\" Echo chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Echo model uses a 3\/8\" LP pitch, .050\" gauge, and 52 drive links, this Oregon chain will fit. Confirm those specs on the bar or in your manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a low-kickback chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The chain features a low-kickback design and met ANSI B175.1-2012 kickback performance requirements in testing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194429264056,"sku":"B00004RA88","price":50.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-front-packaging-14in-chain.jpg?v=1790575331"},{"product_id":"oregon-advancecut-chainsaw-chain-for-8-bar-3-8-lp-043-gauge-34-link-low-kickback-with-lubritec","title":"Oregon AdvanceCut Chainsaw Chain for 8\" Bar — 3\/8\" LP, .043\" Gauge, 34-Link Low-Kickback with LubriTec","description":"\u003cp\u003e\u003cstrong\u003eOregon AdvanceCut 8\" low-kickback chainsaw chain: 34 drive links, 3\/8\" low-profile pitch, and .043\" gauge for compact saws and pole saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain is engineered for small, low-powered chainsaws and pole saws — offering narrower kerf cutting for greater efficiency, a lightweight build for easier handling, and LubriTec oiling to reduce wear on the bar and chain. It’s made to match a variety of manufacturer models and includes top-plate filing indicators so you can sharpen accurately and keep cutting performance consistent. Choose this chain when your old drive link stamping or owner’s manual indicates a 34-link, 3\/8\" LP, .043\" configuration.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this chain affect cutting performance on compact saws?\u003c\/h3\u003e\n\u003cp\u003eThe .043\" gauge and narrow kerf design reduce the power required to cut, which helps small or battery-powered saws run more efficiently and maintain longer runtime under load. A lighter chain also reduces vibration and operator fatigue during pruning or limb work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNarrow kerf uses less motor power and improves battery life on cordless saws\u003c\/li\u003e\n  \u003cli\u003eLightweight construction reduces vibration for steadier cuts\u003c\/li\u003e\n  \u003cli\u003eTop-plate filing guides keep tooth geometry accurate between sharpenings\u003c\/li\u003e\n  \u003cli\u003eLow-kickback profile improves safe handling on small tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain fit my pole saw or compact chainsaw model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on three measurements: drive link count, pitch, and gauge. This Oregon chain fits machines that require 34 drive links with a 3\/8\" low-profile pitch and a .043\" gauge; always confirm the stamped number on your old chain or check the owner’s manual for the bar length and groove size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 8\" guide bar applications and many pole saws up to ~42 cc\u003c\/li\u003e\n  \u003cli\u003eCommonly compatible with brands like DeWalt, Craftsman, Poulan, Ryobi, Worx, Black \u0026amp; Decker and more\u003c\/li\u003e\n  \u003cli\u003eCheck the drive link stamp or manual before ordering to ensure a match\u003c\/li\u003e\n  \u003cli\u003eNot suitable for bars with a different gauge, pitch, or link count\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Oregon’s LubriTec system benefit chain life and maintenance?\u003c\/h3\u003e\n\u003cp\u003eLubriTec is an advanced oiling approach that improves lubricant distribution to the guide bar and chain, lowering friction and wear. Better lubrication reduces heat and extends the time between part replacements while helping the chain track smoothly in the bar groove.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves oil flow to reduce metal-on-metal friction\u003c\/li\u003e\n  \u003cli\u003eHelps preserve guide bar rails and prolong chain life\u003c\/li\u003e\n  \u003cli\u003eWorks with standard bar oil; no special lubricants required\u003c\/li\u003e\n  \u003cli\u003eSupports consistent cutting performance and fewer maintenance stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I sharpen and maintain this AdvanceCut chain?\u003c\/h3\u003e\n\u003cp\u003eThe chain includes top-plate filing indicators to make angle setup and sharpening easier. Use the correct round file size for 3\/8\" low-profile cutters, keep tensioned correctly, and inspect drive link fit to the bar groove regularly for safe, efficient cuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the top-plate indicators to set file angle and depth consistently\u003c\/li\u003e\n  \u003cli\u003eMaintain proper tension: neither too loose nor overly tight\u003c\/li\u003e\n  \u003cli\u003eLubricate with bar oil and inspect for wear or damaged links before use\u003c\/li\u003e\n  \u003cli\u003eReplace when cutters or drive links are worn beyond safe limits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this chain is for: landscapers, gardeners, and homeowners who use compact chainsaws or pole saws and want a durable, efficient replacement chain. It’s especially useful for battery-powered tools and small-gas pole saws (up to about 42 cc) where lower power draw and extended run time matter. If your equipment requires a 34-link, 3\/8\" LP, .043\" chain, this Oregon AdvanceCut option delivers reliable cutting, easier sharpening, and improved lubrication for longer service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this chain fits my saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the drive link count, pitch (3\/8\" LP), and gauge (.043\") from your old chain’s stamp or your owner’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this chain on battery-powered pole saws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The narrow kerf and lightweight design reduce power draw, making it well suited for compact battery pole saws.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194479595704,"sku":"B000BOAG0O","price":45.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chainsaw-chain-front-packaging.jpg?v=1790576080"},{"product_id":"oregon-muffler-for-kohler-engines-35-006-1-thread-direct-fit-oem-equivalent-noise-reduction","title":"Oregon Muffler for Kohler Engines 35-006 — 1\" Thread, Direct-Fit OEM-Equivalent Noise Reduction","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon 35-006 is a direct-fit aftermarket muffler designed to replace Kohler and compatible Briggs \u0026amp; Stratton models, restoring exhaust routing and noise reduction to OEM-equivalent performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by Oregon to match or exceed original equipment specifications, the 35-006 muffler offers a durable, precision-fit replacement for worn or damaged mufflers on small engines. It's engineered for common Kohler single- and twin-cylinder engines (K240–K321 and K532–K582) and is also cross-referenced to several Kohler and Tecumseh part numbers, making it a practical service part for lawn and garden equipment, generators, and other power units.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engine models does this muffler fit?\u003c\/h3\u003e\n\u003cp\u003eThis muffler fits a range of Kohler engines and replaces specific OEM numbers. It's compatible with K240 through K321 and K532 through K582 Kohler engines and cross-replaces several Kohler and Tecumseh parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Kohler K240–K321 and K532–K582 engine families\u003c\/li\u003e\n  \u003cli\u003eReplaces Kohler parts 275679, 275679S, 236649\u003c\/li\u003e\n  \u003cli\u003eCross-replaces Tecumseh part 32043B\u003c\/li\u003e\n  \u003cli\u003e1\" pipe thread for standard exhaust studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does its size and thread spec affect installation?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon 35-006 uses a 1\" pipe thread and compact body dimensions to simplify installation on compatible engines. Knowing the outer diameter and length helps confirm clearance in mower decks and engine shrouds before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\" pipe thread matches common OEM exhaust studs\u003c\/li\u003e\n  \u003cli\u003e4-1\/2\" outer diameter reduces backpressure while staying compact\u003c\/li\u003e\n  \u003cli\u003e3-1\/4\" body length fits typical engine mounting envelopes\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design minimizes the need for adapters or brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eOregon manufactures aftermarket parts to meet or exceed OEM tolerances, using durable materials and workmanship suitable for outdoor power equipment use. The muffler body and welds are designed to withstand heat cycles and vibration common in small engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy stamped and welded muffler construction for longevity\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant finish to resist corrosion and wear\u003c\/li\u003e\n  \u003cli\u003ePrecision-threaded inlet for secure attachment and sealing\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OEM performance and fit dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this muffler affect engine performance or noise?\u003c\/h3\u003e\n\u003cp\u003eWhen matched to the correct engine family and installed properly, the 35-006 restores the intended exhaust flow and noise control similar to the original muffler. It is designed as an OEM-equivalent replacement, not a performance-modifying aftermarket part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintains factory exhaust routing to preserve engine tuning\u003c\/li\u003e\n  \u003cli\u003eReduces exhaust noise comparable to original equipment levels\u003c\/li\u003e\n  \u003cli\u003eDoes not alter engine power output when correctly installed\u003c\/li\u003e\n  \u003cli\u003eHelps prevent exhaust leaks that can impact performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 35-006 muffler is aimed at homeowners, commercial landscapers, and repair technicians who need a reliable OEM-equivalent replacement for Kohler small engines and compatible Briggs \u0026amp; Stratton applications. Choose this part if you require a direct-fit, durable muffler to replace worn or damaged originals on mowers, generators, pressure washers, or similar equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Oregon 35-006 directly replace Kohler part 275679?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 35-006 is a direct replacement for Kohler 275679 and compatible OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread size does this muffler use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a 1\" pipe thread that fits standard exhaust studs on compatible engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194507088056,"sku":"B0018U04WK","price":56.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-35-006-front-view-muffler.jpg?v=1790576541"},{"product_id":"oregon-16-chainsaw-chain-325-pitch-063-gauge-67-drive-links-micro-chisel-cutters-lubritec-oiling","title":"Oregon 16\" Chainsaw Chain .325\" Pitch .063\" Gauge, 67 Drive Links — Micro Chisel Cutters \u0026 LubriTec Oiling","description":"\u003cp\u003e\u003cstrong\u003eOregon L67 16-inch replacement chainsaw chain (.325\" pitch, .063\" gauge, 67 drive links) is a low-vibration, low-kickback cutting attachment built to deliver reliable performance on hardwood and general property work.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for homeowners and landscape professionals who need a dependable replacement chain for saws with a 16\" guide bar, this Oregon ControlCut L67 chain combines Micro Chisel cutters and LubriTec oiling to balance cutting speed, service life, and easier maintenance. It fits many popular .325\"-pitch saws and meets ANSI low-kickback standards, making it a practical option when you want consistent, safe cutting without frequent downtime for sharpening or adjustments.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and bars does this Oregon L67 chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis L67 chain is made for saws using a 16\" guide bar with .325\" sprocket and a .063\" guide bar groove. Confirm compatibility by checking the drive link number stamped on your old chain or your owner's manual before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Stihl models that accept 16\" bars and .325\" sprockets (examples include MS 260, MS 270, MS 280, MS 290, and several 024–036 series models).\u003c\/li\u003e\n  \u003cli\u003eIntended for saws in the 38–62 cc power range running .325\" pitch cutting attachments.\u003c\/li\u003e\n  \u003cli\u003e67 drive links accommodate the standard 16\" bar length; verify drive-link count on the existing chain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cutting performance compare for hardwood and everyday pruning?\u003c\/h3\u003e\n\u003cp\u003eThe chain uses Micro Chisel cutters with small-radius corners that slice efficiently through hardwood while remaining easier to sharpen than full-chisel designs. That combination gives fast, controlled cuts for firewood, limb cleanup, and light milling tasks without overly aggressive biting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro Chisel profile balances cutting speed and maintenance frequency.\u003c\/li\u003e\n  \u003cli\u003eSmall-radius corners reduce snagging and lower vibration for smoother operation.\u003c\/li\u003e\n  \u003cli\u003eSuitable for routine yard work, cleanup, and occasional heavy cuts in hardwood.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features help extend chain and bar life?\u003c\/h3\u003e\n\u003cp\u003eOregon’s LubriTec automatic oiling system is integrated to deliver lubricant where it’s needed most, reducing friction between the chain and guide bar. Combined with the chain’s construction and low-vibration design, this reduces wear and helps you get more cutting cycles between service events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubriTec oiling routes lubricant to critical points to minimize abrasion and overheating.\u003c\/li\u003e\n  \u003cli\u003eLow-vibration design lowers user fatigue and lessens component stress over time.\u003c\/li\u003e\n  \u003cli\u003eDurable materials and a straightforward cutter profile make sharpening and maintenance easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the Oregon L67 chain safe and certified?\u003c\/h3\u003e\n\u003cp\u003eThis replacement chain meets ANSI B175.1 low-kickback performance requirements and is designed to reduce the likelihood of violent kickback compared with non-rated chains. Proper mounting, tensioning, and use of a compatible bar and sprocket are essential steps to maintain those safety benefits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets ANSI low-kickback standard for reduced kickback risk.\u003c\/li\u003e\n  \u003cli\u003eLow-vibration construction helps operators maintain control during cuts.\u003c\/li\u003e\n  \u003cli\u003eAlways follow manufacturer instructions for installation, tension, and lubrication to preserve safety characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon L67 16\" chain suits homeowners and landscaping pros who own a .325\"-pitch saw with a 16\" bar and need a dependable, easy-to-maintain replacement that performs well on hardwood. It’s a practical choice if you want a mix of cutting speed, lower vibration, automatic oiling convenience, and ANSI-tested low-kickback performance for routine property maintenance, firewood cutting, and pruning tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this chain fits my saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the drive link number stamped on your old chain or the owner's manual for .325\" pitch, .063\" gauge, and 67 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this chain on full-time professional logging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This chain is intended for homeowners and landscaping pros; heavy industrial logging may require different spec chains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194520129720,"sku":"B000BQURJC","price":62.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-l67-front-packaging.jpg?v=1790576784"},{"product_id":"oregon-chainsaw-chain-for-16-bar-3-8-pitch-050-gauge-60-links-lubri-tec-heat-treated-cutters","title":"Oregon Chainsaw Chain for 16\" Bar — 3\/8\" Pitch .050 Gauge, 60 Links | Lubri-Tec \u0026 Heat-Treated Cutters","description":"\u003cb\u003eOregon AdvanceCut D60 is a 16-inch replacement chainsaw chain with 3\/8\" pitch, .050\" gauge, and 60 drive links designed for reliable, fast cutting and reduced maintenance.\u003c\/b\u003e\n\n\u003cp\u003eThis Oregon AdvanceCut D60 chain is built for homeowners and landscape pros who need a tough, easy-to-maintain cutting solution for 16-inch bars. Heat-treated cutters, hardened rivets and a chrome-finished outer layer resist wear so the chain stays sharp and stable through routine jobs. It includes Oregon's Lubri-Tec oiling advantages and meets ANSI B175.1-2012 kickback performance standards, making it suitable for many popular saw models from Husqvarna and Stihl.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this chain tougher and longer-lasting?\u003c\/h3\u003e\n\u003cp\u003eThe D60 combines durable materials and manufacturing techniques to withstand frequent use. Hardened rivets and a chrome-coated outer face reduce abrasion and slow down wear on the cutting edges and drive components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated semi-chisel cutters for improved durability\u003c\/li\u003e\n  \u003cli\u003eChrome outer layer that resists wear and maintains cutter geometry\u003c\/li\u003e\n  \u003cli\u003eHardened rivets minimize joint stretch and reduce the need for frequent tensioning\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet ANSI kickback performance criteria\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Lubri-Tec help the chain and bar?\u003c\/h3\u003e\n\u003cp\u003eOregon's Lubri-Tec system distributes oil more effectively to the chain and guide bar, reducing friction and slowing part wear. Better lubrication lowers operating temperature and extends the service life of both chain and bar, so you spend less time on maintenance and more time cutting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved oil delivery to critical wear points\u003c\/li\u003e\n  \u003cli\u003eReduced friction for cooler operation and longer life\u003c\/li\u003e\n  \u003cli\u003eFewer adjustments and less downtime between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich saws and chain numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThe D60 fits many chainsaws that use a 16\" bar with 3\/8\" pitch and .050\" gauge. It’s compatible with several Husqvarna and Stihl models and serves as a direct replacement for common OEM chain part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible saw models: Husqvarna 365, 395XP, 455 Rancher, 460, 51, 55 Rancher, 562XP, 61, 572XP; Stihl MS 290, MS 311, MS 391\u003c\/li\u003e\n  \u003cli\u003eReplaces chain numbers like Husqvarna 591132360 \/ H80-60 and Stihl 33RS360E \/ 3624 005 0060\u003c\/li\u003e\n  \u003cli\u003eFits saws in the 50–100 cc range when using a 16\" guide bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chain perform on different cutting tasks?\u003c\/h3\u003e\n\u003cp\u003eThe semi-chisel full-chisel-style cutters on the D60 offer a balance of speed and tolerance for debris, making it effective on firewood, pruning, and general property maintenance. While optimized for fast, clean cuts in solid wood, its construction tolerates occasional dirty or knotty material better than many high-aggression specialty chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast cutting rate for general-purpose woodwork\u003c\/li\u003e\n  \u003cli\u003eDebris-tolerant design reduces dulling during dirty cuts\u003c\/li\u003e\n  \u003cli\u003eLow-vibration, low-kickback profile enhances operator control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Oregon AdvanceCut D60 is intended for homeowners, arborists, and landscaping professionals who run 16\" bars on mid to large displacement saws and want a dependable, low-maintenance chain. If you need a replacement chain that balances cutting speed, toughness, and easier upkeep—and fits popular Husqvarna and Stihl models—this D60 is a practical choice backed by Oregon's manufacturing standards and Lubri-Tec oiling benefits.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Husqvarna 455 Rancher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon D60 fits a 16\" bar with 3\/8\" pitch and .050\" gauge and is compatible with the Husqvarna 455 Rancher.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain reduce maintenance compared to standard chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Hardened rivets, chrome finish, and Lubri-Tec oiling reduce wear and the frequency of adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54194674630840,"sku":"B00004RA7S","price":57.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-d60-front-packaging.jpg?v=1790578184"},{"product_id":"oregon-chainsaw-chain-for-18-bar-3-8-lp-050-gauge-63-links-low-kickback-lubritec","title":"Oregon Chainsaw Chain for 18\" Bar — 3\/8\" LP .050\" Gauge, 63 Links, Low-Kickback LubriTec","description":"\u003cstrong\u003eOregon AdvanceCut S63 is an 18-inch replacement chainsaw chain with 3\/8\" low-profile pitch, .050\" gauge, and 63 drive links engineered for lower vibration and reduced kickback.\u003c\/strong\u003e\n\n\u003cp\u003eThis Oregon chainsaw chain is built for homeowners and landscape pros who need a reliable, easy-to-maintain replacement for 18\" guide bars. Heat-treated cutters and Oregon’s LubriTec oiling system combine to help extend both chain and bar life, while the low-profile, semi-chisel design balances cutting speed with debris tolerance. Compatible with many popular consumer saw models and rated for saw engines up to about 42 cc, the S63 is a versatile option when you want dependable performance without complex maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this chain affect cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe AdvanceCut S63 uses semi-chisel cutters that deliver smooth, consistent cutting without demanding constant sharpening. You’ll get efficient wood removal and stable feed rates, especially in general-purpose yard and property work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated cutters maintain edge life longer between sharpenings\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel profile resists dulling from dirty wood and debris\u003c\/li\u003e\n  \u003cli\u003eLow-profile design reduces vibration for steadier handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this chain safe and easy to maintain?\u003c\/h3\u003e\n\u003cp\u003eOregon designed the S63 for lower kickback and reduced vibration compared with full-chisel alternatives, improving control for everyday users. LubriTec oiling helps keep the bar groove and drive links lubricated automatically, cutting down on friction and routine upkeep.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-kickback geometry improves operator control\u003c\/li\u003e\n  \u003cli\u003eLubriTec oiling system helps prolong guide bar and chain life\u003c\/li\u003e\n  \u003cli\u003eStandard sharpening and tensioning procedures apply; use the drive link stamp to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain fit my saw and guide bar?\u003c\/h3\u003e\n\u003cp\u003eThe S63 is specified for an 18\" (46 cm) guide bar with a 3\/8\" low-profile pitch and .050\" gauge and contains 63 drive links. To ensure compatibility, match the drive link stamp on your old chain or consult your owner’s manual for pitch, gauge, and bar length.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 18\" bars and saws up to approximately 42 cc\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models include Craftsman 172.34120, Greenworks 20032, Worx WG300\/WG303\/WG304\u003c\/li\u003e\n  \u003cli\u003eConfirm by checking the drive link number stamped on the existing chain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and replacement tips should I follow?\u003c\/h3\u003e\n\u003cp\u003eRegular tension checks, proper lubrication, and timely sharpening will keep cutting performance steady and extend component life. Replace the chain if links are damaged, rivets loosen, or repeated sharpening no longer restores cutting efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep chain tensioned to the manufacturer’s recommended setting before each use\u003c\/li\u003e\n  \u003cli\u003eUse bar oil and rely on LubriTec for improved lubrication coverage\u003c\/li\u003e\n  \u003cli\u003eSharpen with the correct file and check drive link stamping to confirm part number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon AdvanceCut S63 is aimed at homeowners, property managers, and landscaping professionals who perform occasional to moderate cutting tasks and want a dependable, lower-vibration chain for an 18\" guide bar. It’s a practical replacement for common consumer saws and a good balance of durability, safety features, and ease of upkeep for non-industrial use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes and specs does this chain fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits an 18\" guide bar with 3\/8\" low-profile pitch, .050\" gauge, and 63 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm compatibility with my saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the drive link stamp on your old chain or consult your owner's manual for pitch, gauge, and bar length.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54195023446200,"sku":"B00PTAA6HS","price":54.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-s63-front-packaging.jpg?v=1790581041"},{"product_id":"oregon-af100-replacement-spool-3-pack-for-black-decker-pre-wound-0-065-gatorline-easy-snap-in","title":"Oregon AF100 Replacement Spool 3-Pack for Black \u0026 Decker — Pre-Wound 0.065\" Gatorline, Easy Snap-In","description":"\u003cp\u003e\u003cstrong\u003eOregon 3-Pack AF100 replacement spool kit supplies three pre-wound 0.065\" Gatorline spools that fit Black \u0026amp; Decker AF-100 trimmers for fast, reliable line replacement.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your Black \u0026amp; Decker string trimmer running smoothly with this Oregon replacement spool set. Each of the three spools arrives pre-wound with Oregon’s square-twist Gatorline, eliminating tedious rewinding and reducing downtime. The kit is engineered to match AF-100 spool dimensions and is compatible with many popular B\u0026amp;D trimmer models so you can swap them in with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I change an old spool for this Oregon AF100 replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacement is designed to be straightforward: remove the old spool, snap the new pre-wound spool into place, and reassemble the head. The pre-wound design removes the need to wind line yourself, cutting installation time to minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree pre-wound spools ready to install\u003c\/li\u003e\n  \u003cli\u003eSimple remove-and-snap installation in three steps\u003c\/li\u003e\n  \u003cli\u003eNo special tools or winding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spools work with my Black \u0026amp; Decker trimmer model?\u003c\/h3\u003e\n\u003cp\u003eThese Oregon spools are made to replace the Black \u0026amp; Decker AF-100-3ZP spool and are compatible with many B\u0026amp;D series. Check your trimmer’s manual or head size to confirm fit before purchasing, but the design covers a wide range of BESTA, GH, LST, LSTE, NST, CST and ST series units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for AF-100-3ZP style heads\u003c\/li\u003e\n  \u003cli\u003eCompatible with multiple BESTA, GH, LST\/LSTE, NST, CST and ST series models\u003c\/li\u003e\n  \u003cli\u003e0.065\" (1.65 mm) line diameter suits common lightweight trimmers and battery models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance differences will I notice with Oregon Gatorline?\u003c\/h3\u003e\n\u003cp\u003eOregon’s square-twist Gatorline is shaped to slice more cleanly through grass while reducing drag and vibration compared with round line. The edges help maintain cutting efficiency longer, which means fewer line changes and smoother operation during longer trimming sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSquare-twist profile for cleaner cuts and less vibration\u003c\/li\u003e\n  \u003cli\u003eDurable 0.065\" thickness reduces breakage on lighter-duty jobs\u003c\/li\u003e\n  \u003cli\u003ePre-wound spools preserve consistent feed and balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much line comes on each spool and what jobs is it suited for?\u003c\/h3\u003e\n\u003cp\u003eEach spool arrives pre-wound with factory-measured 0.065\" Gatorline sufficient for typical homeowner trimming needs. The line thickness is ideal for routine lawn edge work, trimming around beds and fences, and maintaining small yards without overloading lightweight trimmer motors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-wound, factory-controlled length per spool\u003c\/li\u003e\n  \u003cli\u003eBest for grass, small weeds, and routine yard maintenance\u003c\/li\u003e\n  \u003cli\u003eGood match for battery and lighter gas trimmers to reduce motor strain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners and landscape pros who use Black \u0026amp; Decker trimmers and prefer the convenience of pre-wound spools will appreciate this Oregon 3-pack. It’s aimed at people who want a fast replacement that maintains consistent cutting performance while lowering vibration and noise. If you need a direct AF-100 spool substitute with proven durability and quick installation, this kit provides three ready-to-install spools backed by Oregon’s long history in outdoor power equipment parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with Black \u0026amp; Decker AF-100 heads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon spools are designed to replace AF-100-3ZP style heads and fit many B\u0026amp;D models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What line diameter comes on each spool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each pre-wound spool uses 0.065\" (1.65 mm) Oregon Gatorline, suitable for light to medium trimming.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54195150586040,"sku":"B0FSF9HKCJ","price":54.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-af100-pack-front-view.jpg?v=1790582190"},{"product_id":"oregon-16-inch-chainsaw-chain-325-pitch-063-gauge-62-link-with-micro-chisel-cutters-and-lubritec-oiling","title":"Oregon 16-inch chainsaw chain — .325\" pitch, .063\" gauge, 62-link with Micro Chisel cutters and LubriTec oiling","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon ControlCut L62 is a 62-drive-link replacement chainsaw chain for 16\" bars, built with .325\" pitch, .063\" gauge, Micro Chisel cutters, and LubriTec oiling for reliable cutting and extended component life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement saw chain is engineered for homeowners and landscapers who need a dependable 16\" chain that balances cutting speed, durability, and easy maintenance. Designed to fit many common chainsaw models (notably several Stihl saws with a .325\" sprocket), the chain targets saws in the 38–62 cc range. It meets ANSI B175.1-2012 kickback performance requirements and uses Micro Chisel cutters to handle hardwood efficiently while staying simple to sharpen.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and bar sizes will this chain fit?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon L62 is made for 16\" guide bars using .325\" pitch and a .063\" (1.6 mm) gauge, with 62 drive links. It’s compatible with a variety of chainsaws that accept those exact dimensions. Always verify your saw’s sprocket pitch, gauge, and required link count before ordering to ensure proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 16\" bars with .325\" pitch and .063\" gauge\u003c\/li\u003e\n  \u003cli\u003e62 drive links — matches saws listing L62 or 62-link chains\u003c\/li\u003e\n  \u003cli\u003eFits Stihl models such as 025, 025C, MS 230, MS 230 C, MS 241 C-M, MS 250 series, MS 251 series\u003c\/li\u003e\n  \u003cli\u003eSuitable for saw engines rated about 38–62 cc\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain cut and how easy is maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe Micro Chisel cutters on this Oregon chain have small-radius working corners that slice through hardwood quickly and stay sharper longer than standard rounded cutters. Those cutters are straightforward to resharpen with common files or a bench grinder following manufacturer recommendations, keeping downtime low. The chain’s design reduces vibration and helps maintain smooth feeding during typical chainsaw tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro Chisel cutters for faster hardwood cutting\u003c\/li\u003e\n  \u003cli\u003eSmall-radius corners simplify sharpening and upkeep\u003c\/li\u003e\n  \u003cli\u003eLow-vibration layout for steadier cutting and user comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features extend chain and bar life?\u003c\/h3\u003e\n\u003cp\u003eOregon’s LubriTec oiling system is integrated into the chain design to transport lubricant to critical contact points, which helps reduce wear on both the chain and guide bar. Consistent oiling means fewer premature replacements and smoother cutting performance over time. The materials and heat treatment used in manufacturing are optimized for durability in routine residential and light-professional use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubriTec delivers oil to key parts for reduced friction\u003c\/li\u003e\n  \u003cli\u003eHeat-treated components for improved wear resistance\u003c\/li\u003e\n  \u003cli\u003eManufactured to ANSI B175.1-2012 kickback performance standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this chain substitute specific OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eYes — the ControlCut L62 can be used as a replacement for several chains bearing similar specs. It’s interchangeable with common chains such as Husqvarna H28-62 and Stihl 26RM3 62 when the saw calls for .325\" pitch, .063\" gauge, and 62 drive links. Still, check your chainsaw manual or consult a dealer to confirm compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible cross-references include Husqvarna H28-62 and Stihl 26RM3 62\u003c\/li\u003e\n  \u003cli\u003eWorks as a replacement when pitch, gauge, and link count match\u003c\/li\u003e\n  \u003cli\u003eConfirm chain tensioning and bar lubrication after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon ControlCut L62 is ideal for homeowners, property managers, and landscapers using 16\" chainsaws in the 38–62 cc range who want a ready-to-use replacement chain that balances fast hardwood cutting, simple maintenance, and extended life from LubriTec oiling. Choose this chain when you need proven compatibility with common Stihl models and ANSI-level safety performance without stepping up to professional-grade, high-production chains.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Stihl MS 230 with a 16\" bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your MS 230 uses a 16\" bar with .325\" pitch, .063\" gauge and requires 62 drive links, this Oregon L62 chain will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain suitable for cutting hardwood?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Micro Chisel cutters are designed to cut hardwood efficiently while remaining straightforward to sharpen.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54195279790264,"sku":"B00407SAZ6","price":59.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-packaging_7a94b4cd-3883-42b5-886f-5ef5514c8046.jpg?v=1790582905"},{"product_id":"oregon-inline-fuel-shut-off-1-4-ball-valve-gray-compact-barbed-quarter-turn","title":"Oregon Inline Fuel Shut-Off 1\/4\" Ball Valve, Gray — Compact Barbed Quarter-Turn","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon 07-403 is a compact inline fuel shut-off featuring a robust 1\/4\" ball valve designed to stop fuel flow quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis in-line fuel shutoff is built for small engines and outdoor power equipment that use 1\/4\" fuel line. The unit installs directly into the fuel hose to isolate the fuel supply for maintenance, winter storage, or transport. Its straightforward lever operation and solid ball-valve construction replace worn or leaking shutoffs and is compatible where a Scag 48568 replacement is specified.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve fit into a 1\/4\" fuel line?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is simple: cut the existing fuel hose, push each end onto the barbed inlets, and secure with clamps. The valve's 1\/4\" barbs match standard small-engine tubing, creating a compact inline connection without bulky adapters. It sits between the tank and carburetor or primer bulb, giving immediate control over fuel supply.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBarbed 1\/4\" fittings for direct hose insertion\u003c\/li\u003e\n  \u003cli\u003eWorks inline between tank and engine components\u003c\/li\u003e\n  \u003cli\u003eRequires standard worm-drive or pinch clamps for secure sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a ball valve design for fuel shutoff?\u003c\/h3\u003e\n\n\u003cp\u003eBall valves provide a positive on\/off action with minimal internal resistance and very low leakage when closed. The Oregon 07-403 uses a machined ball seat for dependable sealing and long service life in outdoor conditions. Its compact lever gives tactile feedback so you can confirm open or closed position at a glance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuick quarter-turn operation for fast shutoff\u003c\/li\u003e\n  \u003cli\u003eDurable ball-seat design resists wear and sealing failure\u003c\/li\u003e\n  \u003cli\u003eCompact profile that minimizes space in fuel routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this replace a Scag 48568 or similar OEM part?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Oregon 07-403 is specified as a compatible replacement where a Scag 48568 is used, matching the same 1\/4\" inline configuration and shutoff function. Verify hose diameter and installation clearance before ordering to ensure a direct swap. If the original used clamps or retained fittings, carry those over for a secure match.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eListed compatibility with Scag 48568-style installs\u003c\/li\u003e\n  \u003cli\u003eSame 1\/4\" hose size and inline orientation\u003c\/li\u003e\n  \u003cli\u003eIdeal for like-for-like replacement jobs on small engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and safety steps should I follow?\u003c\/h3\u003e\n\n\u003cp\u003ePeriodically exercise the valve to prevent sticking and inspect for fuel seepage around barbs. Replace hose clamps if corroded and swap the valve at any sign of leaks, corrosion, or stiff operation. Always relieve pressure and work in a ventilated area when servicing fuel systems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOperate lever occasionally to keep moving parts free\u003c\/li\u003e\n  \u003cli\u003eInspect hose clamps and replace if worn or loose\u003c\/li\u003e\n  \u003cli\u003eChange valve immediately if leaking or hard to turn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 07-403 suits homeowners, landscapers, and small-engine mechanics who need a dependable inline shutoff for lawn mowers, generators, string trimmers, and other 1\/4\" fuel-line equipment. It's especially useful for anyone replacing a worn OEM shutoff like the Scag 48568 or upgrading to a more durable ball-valve style. Choose this part when you want a compact, straightforward fuel isolation solution that's easy to install and service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit 1\/4 inch fuel hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon 07-403 is designed for standard 1\/4\" fuel line with barbed fittings for direct insertion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it replace a Scag 48568?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's compatible as a replacement for Scag 48568-style inline shutoffs when hose size matches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54195321864376,"sku":"B0018U234W","price":53.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-inline-fuel-shutoff-front-view.jpg?v=1790583023"},{"product_id":"oregon-chainsaw-chain-controlcut-20-bar-325-pitch-050-gauge-78dl-low-kickback-easy-sharpening","title":"Oregon chainsaw chain — ControlCut 20\" bar .325\" pitch .050\" gauge 78DL, low‑kickback \u0026 easy sharpening","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon ControlCut 20-inch replacement chainsaw chain fits .325\" pitch, .050\" gauge bars with 78 drive links for reliable, low-kickback cutting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Oregon ControlCut chain is engineered as a drop-in replacement for a wide range of consumer and pro chainsaws requiring a 20\" bar, .325\" pitch and .050\" (1.3 mm) gauge with 78 drive links. Designed by Oregon — the company that pioneered modern saw chain — it balances cutting speed, control and serviceability. It’s compatible with many popular models from brands such as Craftsman, Echo, Husqvarna, Makita, Jonsered, Poulan, Ryobi and more; always confirm your saw’s manual or measure your bar slot and drive link count before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat machines will this 20\" Oregon chain actually fit?\u003c\/h3\u003e\n\u003cp\u003eThis chain suits chainsaws specified for .325\" pitch, .050\" gauge and 78 drive links using a 20\" guide bar. It fits many mid-range and homeowner-to-professional saws across multiple brands, but fit varies by model year and variant. Verify compatibility by checking the saw’s manual or counting the drive links on your current chain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpec: .325\" pitch, .050\" (1.3 mm) gauge, 78 drive links, 20\" bar\u003c\/li\u003e\n  \u003cli\u003eListed compatible brands: Craftsman, Echo, Husqvarna, Makita, McCulloch, Jonsered, Poulan, Ryobi, John Deere and others\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models include Echo CS-series and Husqvarna 36\/136\/140S families\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the ControlCut design affect cutting and safety?\u003c\/h3\u003e\n\u003cp\u003eThe ControlCut configuration uses small-radius cutting corners and depth-gauge spacing to deliver smooth, fast slicing while moderating aggressive bite. A bumper-style drive link and depth-gauge geometry reduce kickback compared with standard chisel chains, making it a solid option for routine pruning, limbing and firewood cutting. Regular sharpening and proper tensioning maintain these benefits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro-chisel teeth for efficient hardwood cutting\u003c\/li\u003e\n  \u003cli\u003eDepth-gauge spacing and bumper drive link reduce kickback potential\u003c\/li\u003e\n  \u003cli\u003eDesigned for easier, repeatable sharpening and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the maintenance and sharpening expectations?\u003c\/h3\u003e\n\u003cp\u003eThis chain is serviceable with standard round- and flat-files suited to its cutter profile. Frequent light sharpening keeps cutting quick and reduces strain on the saw; when cutters become uneven or deeply worn, follow the manufacturer’s sharpening guide or seek professional sharpening. Proper bar and chain oiling plus correct tension are essential to extend chain life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen with a round file matching cutter radius and a flat file for depth gauges\u003c\/li\u003e\n  \u003cli\u003eMaintain correct tension and use bar\/chain oil for lubrication\u003c\/li\u003e\n  \u003cli\u003eInspect drive links and rivets periodically for wear or damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich performance scenarios suit this chain best?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon ControlCut chain performs well for homeowners and pros who need balanced cutting speed with reduced kickback risk. It’s appropriate for limbing, storm cleanup, moderate felling and firewood processing on saws in the 38–62 cc range. For extreme production felling or specialized milling, choose a chain optimized for that task.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreat for pruning, limbing, and firewood cutting\u003c\/li\u003e\n  \u003cli\u003eSuited to saws typically 38–62 cc using a 20\" bar\u003c\/li\u003e\n  \u003cli\u003eNot intended as a dedicated heavy-production or carbide-tipped milling chain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon ControlCut 20\" .325\"\/.050\" 78-link chain is aimed at homeowners, landscapers and professional arborists who want a dependable replacement chain offering a balance of cutting performance and reduced kickback. If your saw’s specifications match (.325\" pitch, .050\" gauge, 78 drive links, 20\" bar), this chain is a practical, serviceable option backed by Oregon’s long-standing chain design expertise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Husqvarna MS 361?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if your MS 361 uses a 20\" bar, .325\" pitch, .050\" gauge and has 78 drive links. Check your manual or count drive links to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen the ControlCut chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen when cutting slows, cutters chip, or you need to increase force; frequent light filings keep performance and reduce wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54195700334776,"sku":"B0007ZK5SK","price":62.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-controlcut-front-packaging.jpg?v=1790585123"},{"product_id":"oregon-chainsaw-sharpening-kit-7-piece-field-set-with-3-round-files-flat-file-universal-handle-canvas-pouch","title":"Oregon Chainsaw Sharpening Kit — 7-Piece Field Set with 3 Round Files, Flat File \u0026 Universal Handle (Canvas Pouch)","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon Universal Chainsaw Field 7-Piece Sharpening Kit is a compact, portable set of round and flat files with a universal handle and guide for on-the-job chainsaw and pole saw sharpening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for mechanics, arborists, landowners, and anyone who uses saw chains in the field, this kit gathers the essential files and accessories you need to keep cutting edges consistent without returning to the shop. The kit includes three round saw chain files (3\/16\", 5\/32\", 7\/32\"), a 6\" flat file, a file guide for setting depth gauges, a universal handle that accepts all included files, a printed filing chart and instructions, and a durable rolled canvas pouch with inner pockets and loop closure for secure transport.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use the kit to sharpen a dull chainsaw chain?\u003c\/h3\u003e\n\u003cp\u003eStart by identifying the correct round file size for your chain using the included filing chart, then secure the saw and attach the universal handle to the chosen file. Use the file guide to set and maintain the proper angle and depth gauge height, and make even, controlled strokes across each cutter for consistent results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChoose correct file size from the chart (3\/16\", 5\/32\", or 7\/32\")\u003c\/li\u003e\n  \u003cli\u003eAttach file to the universal handle for leverage and comfort\u003c\/li\u003e\n  \u003cli\u003eUse the file guide to maintain the factory angle and depth gauge setting\u003c\/li\u003e\n  \u003cli\u003ePerform equal strokes across all cutters, then recheck depth gauges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why does each matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles three round files to match common chain pitches, a flat file for depth gauges, a universal handle for comfortable filing, a file guide to preserve cutting geometry, and a printed instruction sheet with a filing chart. Each component ensures you can sharpen accurately, work quickly, and store the tools neatly between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRound files (3 sizes) to match different chain pitches\u003c\/li\u003e\n  \u003cli\u003e6\" flat file to maintain depth gauges and rakers\u003c\/li\u003e\n  \u003cli\u003eUniversal handle for safe, ergonomic filing control\u003c\/li\u003e\n  \u003cli\u003eFile guide and instruction chart for consistent angles and depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and durable is the field kit for outdoor work?\u003c\/h3\u003e\n\u003cp\u003eThe tools stow inside a compact rolled canvas pouch with individual inner pockets and a loop closure, making the kit easy to carry on a belt, in a tool bag, or inside a chainsaw case. The canvas construction protects files and paperwork, while the universal handle and metal files are built to withstand routine field use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRolled canvas pouch keeps tools organized and protected\u003c\/li\u003e\n  \u003cli\u003eInner pockets prevent files from rubbing or dulling each other\u003c\/li\u003e\n  \u003cli\u003eLoop closure secures kit while transporting between jobsites\u003c\/li\u003e\n  \u003cli\u003eMetal files and handle designed for repeated field sharpening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I match the right file to my chainsaw or pole saw?\u003c\/h3\u003e\n\u003cp\u003eRefer to the included filing chart and your chain’s pitch or manufacturer spec to choose the correct round file diameter; the kit covers common pitches with its three file sizes. If your chain’s pitch isn’t obvious, measure between rivets or check the chain model stamp, then select the closest file size in the kit for safe, accurate sharpening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck chain stamp or measure pitch between rivets\u003c\/li\u003e\n  \u003cli\u003eUse filing chart to match pitch to 3\/16\", 5\/32\", or 7\/32\" file\u003c\/li\u003e\n  \u003cli\u003eEmploy file guide to keep cutter angle factory-accurate\u003c\/li\u003e\n  \u003cli\u003eFinish with flat file to reestablish proper depth gauges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for: The Oregon Universal Chainsaw Field 7-Piece Sharpening Kit is for homeowners, loggers, arborists, landscapers, and equipment technicians who need a reliable, portable solution to maintain saw chain performance away from the workshop. It suits anyone who values quick, repeatable sharpening at job sites, in service trucks, or while working in remote outdoor locations, and who prefers a simple, complete set that stores neatly in a rugged canvas pouch.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which file sizes are included in this Oregon sharpening kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains 3\/16\", 5\/32\", and 7\/32\" round files plus a 6\" flat file.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a guide to set depth gauges?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes a file guide and a printed filing chart for depth gauge and angle setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54195823280312,"sku":"B084XV4TGX","price":60.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-front-packaging-with-pouch.jpg?v=1790585803"},{"product_id":"oregon-magnum-gatorline-095-in-trimmer-line-114-ft-heavy-duty-square-profile-aramid-reinforced","title":"Oregon Magnum Gatorline .095 in Trimmer Line 114-ft — Heavy-Duty Square Profile, Aramid-Reinforced","description":"\u003cstrong\u003eOregon Magnum Gatorline .095\" x 114-foot is a heavy-duty, square-profile trimmer line engineered for cleaner cuts, longer life, and compatibility with many consumer and pro string trimmers.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need a rugged replacement line that resists breakage, reduces vibration and keeps jobs moving, this Magnum Gatorline offers a reinforced dual-polymer construction and a square cross section for efficient slicing through weeds and thick turf. Wound on a convenient 114-foot donut, the line fits numerous popular trimmer models and is designed to handle tougher residential and light commercial tasks while cutting down on reloading time and repair interruptions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this trimmer line improve cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe square profile delivers a firmer, cleaner edge through grass and overgrowth than round lines, translating to straighter cuts and fewer missed stems. Dual-polymer layering gives a balance of flexibility and edge retention so the line maintains cutting power longer. Aramid fiber reinforcement in the core raises break-resistance, especially when contacting hard surfaces like stone or edging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSquare cross section for sharper, even passes\u003c\/li\u003e\n  \u003cli\u003eDual-polymer build for flexibility and edge durability\u003c\/li\u003e\n  \u003cli\u003eAramid-reinforced core reduces shredding and snaps\u003c\/li\u003e\n  \u003cli\u003eDesigned for heavier weeds and frequent use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this .095\" line fit my trimmer model?\u003c\/h3\u003e\n\u003cp\u003eThe 0.095-inch diameter is a common size for consumer and light commercial trimmers; it fits many shaft and bump-feed heads that accept medium-duty line. Oregon lists broad compatibility with several popular brands, but always check your machine’s recommended diameter and spool capacity before purchasing. When in doubt, consult your trimmer manual or measure the head opening to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fit for many consumer and light-commercial heads\u003c\/li\u003e\n  \u003cli\u003eCompatible with models like Echo, Stihl, Husqvarna, DeWalt, Ryobi and Troy-Bilt\u003c\/li\u003e\n  \u003cli\u003eComes on a 114-foot donut for easy winding or direct use in compatible heads\u003c\/li\u003e\n  \u003cli\u003eCheck your trimmer manual for diameter and spool type guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does one donut last and how does it save time?\u003c\/h3\u003e\n\u003cp\u003eA 114-foot donut provides ample line for multiple reloads, depending on how often you trim and the width of your spool. Because the line resists breakage, you’ll waste fewer minutes replacing snapped trimmer line mid-job. The donut format also makes it fast to wind your spool or feed compatible bump heads, keeping you moving through lawns, edges, and work sites.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e114 feet yields many spool refills or extended single-season use\u003c\/li\u003e\n  \u003cli\u003eFewer breakages mean less downtime and fewer replacement purchases\u003c\/li\u003e\n  \u003cli\u003eDonut shape simplifies storage and reloading procedures\u003c\/li\u003e\n  \u003cli\u003eGood choice for routine yard maintenance and recurring jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this line suitable for noisy or rough conditions?\u003c\/h3\u003e\n\u003cp\u003eThe Magnum Gatorline’s construction lowers vibration and reduces the tearing noise common with brittle lines. While no trimmer line is silent, the flexible outer polymer layer helps dampen chatter and makes handling around obstacles like fences and driveways easier. Reinforced core strength protects against abrupt breaks when the line contacts hard objects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexible outer layer reduces vibration and noise\u003c\/li\u003e\n  \u003cli\u003eCore reinforcement minimizes sudden snaps against hard surfaces\u003c\/li\u003e\n  \u003cli\u003eSquare shape slices cleanly, lowering string drag and stray tears\u003c\/li\u003e\n  \u003cli\u003eWell-suited for work near patios, beds, and edging features\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon Magnum Gatorline .095\" x 114-foot is aimed at homeowners who want a reliable, longer-lasting replacement line and landscape professionals performing light commercial jobs. It’s a practical pick for anyone who trims frequently, deals with thicker weeds, or prefers fewer spool reloads. Choose this line when you need a balance of cutting performance, durability, and broad compatibility without stepping up to heavier industrial gauges.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What diameter is the Oregon Magnum Gatorline and how long is it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: .095-inch diameter, wound on a 114-foot donut for multiple spool refills.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this line fit popular consumer trimmers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's compatible with many Echo, Stihl, Husqvarna, DeWalt, Ryobi and Troy-Bilt models; check your manual to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54195830325432,"sku":"B0018TZZWU","price":52.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-gatorline-front-packaging.jpg?v=1790585827"},{"product_id":"oregon-16-chainsaw-chain-3-8-lp-050-gauge-56-drive-links-s56-smooth-reduced-kickback","title":"Oregon 16\" Chainsaw Chain 3\/8\" LP .050\" Gauge 56 Drive Links — S56 Smooth, Reduced Kickback","description":"\u003cb\u003eOregon S56 is a 16-inch, low-profile 3\/8\" pitch saw chain with .050\" gauge and 56 drive links engineered for smooth cutting and reduced kickback.\u003c\/b\u003e\n\n\u003cp\u003eThis replacement chain is built to fit a wide range of popular chainsaw makes and models that require a 3\/8\" low-profile pitch, .050\" (1.3 mm) gauge, and 56 drive links. Oregon’s S56 features chamfer chisel cutters and a notched bumper drive link for improved chip flow, reliable performance on 16\" bars, and compliance with industry kickback standards when tested to ANSI and CSA requirements. Use this chain when your saw manual specifies these dimensions and always confirm fit before installing.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my chainsaw model?\u003c\/h3\u003e\n\u003cp\u003eIf your chainsaw requires a 3\/8\" low-profile pitch, .050\" gauge, and 56 drive links for a 16\" bar, the S56 is designed to fit. It covers many models across major brands, but compatibility must be verified against your owner's manual or the saw's stamped specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm: 3\/8\" low-profile pitch, .050\" (1.3 mm) gauge, 56 drive links, 16\" guide bar.\u003c\/li\u003e\n  \u003cli\u003eWorks with many Craftsman, Husqvarna, Echo (with Oregon bar), Makita, Homelite, McCulloch, Poulan models.\u003c\/li\u003e\n  \u003cli\u003eDouble-check sprocket type (some Husqvarna models require a 3\/8\" low-profile sprocket).\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, match part numbers or consult the manufacturer’s fitment guide at oregonchain.com.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the S56 chain reduce kickback and improve cutting?\u003c\/h3\u003e\n\u003cp\u003eThe S56 combines a notched bumper drive link with depth-gauged chamfer chisel cutters to manage bite and chip ejection. This geometry lowers the likelihood of violent kickback while maintaining efficient wood removal and a smooth cut stroke.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNotched bumper drive link helps stabilize engagement with the guide bar.\u003c\/li\u003e\n  \u003cli\u003eChamfer chisel cutters deliver consistent chip flow and clean cuts.\u003c\/li\u003e\n  \u003cli\u003eLow-profile design reduces aggressive bite for safer operation on consumer saws.\u003c\/li\u003e\n  \u003cli\u003eTested to meet ANSI B175.1 and CSA Z62.3 kickback performance requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and sharpening should I expect?\u003c\/h3\u003e\n\u003cp\u003eS56 cutters are serviceable with routine filing or a round-file sharpening guide sized to the cutter radius. Regular tension checks and lubrication extend chain life and keep cutting smooth; replace the chain once cutters are worn beyond safe sharpening limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen with a round file sized for chamfer chisel cutters and maintain cutter angles.\u003c\/li\u003e\n  \u003cli\u003eKeep correct chain tension and use bar-and-chain oil for lubrication.\u003c\/li\u003e\n  \u003cli\u003eInspect drive links and tie straps for wear before each use.\u003c\/li\u003e\n  \u003cli\u003eReplace when pitch, depth gauges, or cutters are too worn to restore safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich saw brands and specific models are known to work with this chain?\u003c\/h3\u003e\n\u003cp\u003eThe S56 is intentionally compatible with numerous household and light-professional saws. Notable fit lists include many Craftsman, Echo (with Oregon bars), Husqvarna, Makita, Homelite, McCulloch and Poulan models—verify model numbers against the chain’s specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExample Craftsman models: 358.34116, 358.35161, 358.35170, 358.35514.\u003c\/li\u003e\n  \u003cli\u003eExample Echo models (with Oregon bar): CS-310, CS-330T, CS-346, CS-352, CS-355T.\u003c\/li\u003e\n  \u003cli\u003eHusqvarna examples: 136, 137, 142, 235E, 240 (verify low-profile sprocket).\u003c\/li\u003e\n  \u003cli\u003eAlso fits numerous Makita, Homelite, McCulloch, Poulan saws—see product fit list for details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon S56 chain is aimed at homeowners, landscapers, and light-duty professionals who use 16\" bars on chainsaws rated up to roughly 42cc and need a dependable, low-kickback replacement chain. Choose the S56 when your saw’s manual specifies a 3\/8\" low-profile pitch, .050\" gauge, and 56 drive links, and you want Oregon-engineered cutters for consistent cutting and simplified joining of chain loops.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit any 16\" chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if the saw requires 3\/8\" low-profile pitch, .050\" gauge, and 56 drive links—verify your manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the S56 low-kickback certified?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it met ANSI B175.1 testing provisions and conforms to CSA Z62.3 kickback performance standards.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54197154939064,"sku":"B00004RA82","price":52.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-packaging_49c201f2-2580-47ce-a9dd-68c1a58b752c.jpg?v=1790587945"},{"product_id":"oregon-14-inch-bar-chain-combo-3-8-inch-pitch-050-gauge-50-drive-links-low-vibration-semi-chisel","title":"Oregon 14-inch Bar \u0026 Chain Combo, 3\/8 inch pitch .050 gauge, 50 Drive Links — Low-vibration Semi-Chisel","description":"\u003cp\u003e\u003cstrong\u003eOregon's 14\" bar and 50-drive-link chain is a ready-to-install replacement that fits many Stihl saws, delivering low-vibration cutting and reduced kickback for reliable, everyday performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Oregon 14-inch bar and chain combo pairs a reversible guide bar with a heat-treated semi-chisel chain designed for landscaping pros and homeowners who need a dependable, easy-to-maintain cutting setup. Built to match a 3\/8\" pitch and .050\" gauge with 50 drive links, the kit is engineered to work with a wide range of Stihl models and saws up to about 42 cc. Oregon's Lubritec oiling system helps reduce friction and extend component life, while the chain meets ANSI B175.1-2012 kickback performance guidelines for added peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and engines will this 14\" bar and chain work with?\u003c\/h3\u003e\n\n\u003cp\u003eThe combo is compatible with many Stihl models including smaller homeowner and light-professional chainsaws. It fits saws that accept a 14\" bar, 3\/8\" pitch, and .050\" gauge with 50 drive links, and is commonly used on engines up to roughly 42 cc. Always check your saw's manual or existing bar for matching pitch, gauge, and drive link count before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits many Stihl models such as MS 170, MS 180, 009, 010, 011, 012 and equivalents\u003c\/li\u003e\n  \u003cli\u003eDesigned for saws with A074 motor mount and 50 drive links\u003c\/li\u003e\n  \u003cli\u003eWorks with both gas and compatible electric Stihl models like MSE 140 series\u003c\/li\u003e\n  \u003cli\u003eSuitable for saws up to approximately 42 cc displacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chain balance cutting performance and safety?\u003c\/h3\u003e\n\n\u003cp\u003eThe semi-chisel, heat-treated cutters are shaped to slice wood smoothly while keeping tolerance for dirt and debris, which helps preserve cutting speed over time. The low-vibration design reduces operator fatigue during repeated use, and the chain meets ANSI kickback performance standards to help minimize dangerous kickback events. Routine sharpening and proper tensioning keep the chain operating at peak efficiency.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeat-treated semi-chisel cutters for consistent cutting and debris tolerance\u003c\/li\u003e\n  \u003cli\u003eLow-vibration geometry for more comfortable handling during extended jobs\u003c\/li\u003e\n  \u003cli\u003eANSI B175.1-2012 compliant kickback performance for enhanced safety\u003c\/li\u003e\n  \u003cli\u003eLubritec oiling compatibility to reduce friction and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and setup steps ensure long chain life?\u003c\/h3\u003e\n\n\u003cp\u003eKeep the chain well-lubricated, properly tensioned, and sharpened when it dulls to preserve cutting quality and reduce wear. Use the bar's reversible design to rotate the rail periodically for even wear, and inspect drive links and rivets for damage before each use. Replacing the chain before excessive wear or damage avoids stress on the saw and guide bar.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse quality bar and chain oil; check oiling system flow before each use\u003c\/li\u003e\n  \u003cli\u003eAdjust tension with a cool chain—proper tension reduces teeth chipping\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace when cutting slows, increases effort, or teeth chip\u003c\/li\u003e\n  \u003cli\u003eSwap bar orientation occasionally to equalize wear on rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy pick this Oregon bar and chain combo instead of separate parts?\u003c\/h3\u003e\n\n\u003cp\u003eBuying the bar and chain together ensures correct match of pitch, gauge and drive link count for straightforward installation and reliable performance. The combo includes Oregon-specific features—like Lubritec compatibility and a lightweight reversible bar—so you get a ready-to-fit replacement that reduces setup guesswork. It’s a convenient, cost-effective choice for users who want a trusted, compatible replacement without hunting for individual components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFactory-matched bar and chain reduce installation errors\u003c\/li\u003e\n  \u003cli\u003eOregon features such as Lubritec-ready surfaces extend service intervals\u003c\/li\u003e\n  \u003cli\u003eReversible guide bar extends usable life compared with single-sided bars\u003c\/li\u003e\n  \u003cli\u003ePackaged for quick swap on compatible Stihl saws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon 14\" bar and chain combo is aimed at homeowners, property managers, and landscaping professionals who use Stihl-class saws for routine cutting, pruning, and light felling. It suits users who want an easy-to-install, ANSI-compliant replacement that balances cutting performance, serviceability, and safety—ideal for occasional commercial use or regular yard maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Oregon 14\" bar and chain compatible with my Stihl MS 180?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your MS 180 uses a 14\" bar with 3\/8\" pitch, .050\" gauge and 50 drive links, this combo will fit. Verify your saw's specs before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen the Oregon chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen when cutting power drops, the saw produces fine sawdust instead of chips, or after striking dirt. Frequency depends on use and material.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54198372368568,"sku":"B000CFLFQ6","price":61.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-14in-bar-chain-front-packaging.jpg?v=1790589645"},{"product_id":"oregon-16-chainsaw-chain-3-8-lp-050-gauge-57-drive-links-low-kickback-cutting-for-home-saws","title":"Oregon 16\" Chainsaw Chain — 3\/8\" LP, .050\" Gauge, 57 Drive Links — Low-Kickback Cutting for Home Saws","description":"\u003cp\u003e\u003cstrong\u003eOregon's 16\" replacement chainsaw chain is a 3\/8\" low-profile, .050\" gauge, 57-drive-link cutting chain engineered for a wide range of consumer and small professional saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis chainsaw chain fits chains with a 16\" bar and is built for saws that require a 3\/8\" low-profile pitch and a .050\" (1.3 mm) gauge guide slot. It includes 57 drive links, so confirm your saw's bar length, drive link count, pitch and gauge before ordering. The chain meets low-kickback performance requirements when tested to ANSI B175.1-2012 and complies with CSA Z62.3 kickback criteria; it offers reduced kickback design without sacrificing cutting capability.\u003c\/p\u003e\n\n\u003ch3\u003eWhich chainsaws will this chain work on?\u003c\/h3\u003e\n\u003cp\u003eThis Oregon chain is compatible with many popular homeowner and light-duty models. Use the model list and your saw’s specifications to verify fit. If your manual lists 3\/8\" LP pitch, .050\" gauge and 57 drive links for a 16\" bar, this chain is likely correct.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Echo CS290, CS300, CS305, CS306, CS310 and CS-3510-16.\u003c\/li\u003e\n  \u003cli\u003eOther compatible brands: Black \u0026amp; Decker CS1216, Sun Joe SWJ699E, Worx WG300\/303\/304.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Craftsman, Earthwise, Milwaukee, Shindaiwa models listed in the product specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the low-kickback design affect safety and performance?\u003c\/h3\u003e\n\u003cp\u003eThe chain's bumper drive links and depth gauge layout are designed to reduce the chance of dangerous kickback events. That low-kickback geometry helps the chain meet ANSI and CSA testing standards while keeping cutting smooth. It still provides effective cutting for pruning, limbing and general yard work when used correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBumper drive links limit sudden upward reaction (kickback).\u003c\/li\u003e\n  \u003cli\u003eDepth gauges control tooth bite for steadier cuts.\u003c\/li\u003e\n  \u003cli\u003eMaintains consistent cutting action for chainsaw sizes up to about 42cc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and setup steps should I follow after installing?\u003c\/h3\u003e\n\u003cp\u003eProper installation, tensioning and lubrication maximize chain life and cutting quality. After fitting the chain to the bar and sprocket, adjust tension to remove sag but allow one or two drive links to move freely. Regularly sharpen, clean, and use bar-and-chain oil to preserve performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck bar length, pitch and drive link count before installation.\u003c\/li\u003e\n  \u003cli\u003eTension chain to manufacturer specs after warming up the saw.\u003c\/li\u003e\n  \u003cli\u003eSharpen teeth or replace chain when cutting slows or teeth show wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain work on my light electric or battery saw?\u003c\/h3\u003e\n\u003cp\u003eYes — many small electric and battery-powered saws use the same 3\/8\" low-profile, .050\" gauge chains. Confirm the drive link count and bar length in your saw's manual. The chain is suitable for common lighter-duty electric models where the saw requires a 16\" bar and 57 drive links.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with several electric models like Sun Joe and Blue Max.\u003c\/li\u003e\n  \u003cli\u003eGood for routine yard work, pruning and small cutting tasks.\u003c\/li\u003e\n  \u003cli\u003eNot intended for heavy industrial logging or large-diameter felling jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon 16\" 3\/8\" LP .050\" gauge chain is aimed at homeowners, landscapers and light-duty pros who need a reliable replacement chain for small to mid-size saws (up to about 42cc). If you value a low-kickback profile, broad cross-brand compatibility and the engineering heritage of a recognized chain manufacturer, this chain is a practical choice — just confirm your saw’s pitch, gauge and drive link count before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know this chain fits my chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match your chainsaw's bar length, pitch (3\/8\" LP), gauge (.050\") and drive link count (57). Check the owner's manual if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain low-kickback?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The chain features bumper drive links and depth gauges and met ANSI B175.1-2012 and CSA Z62.3 low-kickback test criteria.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54198924247224,"sku":"B00004RA89","price":53.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-view-packaging.jpg?v=1790591115"},{"product_id":"oregon-16-chainsaw-chain-3-8-low-profile-043-gauge-56-link-low-kickback-heat-treated-cutters","title":"Oregon 16\" Chainsaw Chain 3\/8\" Low-Profile .043\" Gauge, 56-Link — Low-Kickback, Heat-Treated Cutters","description":"\u003cp\u003e\u003cstrong\u003eOregon 16\" chainsaw chain: a 3\/8\" low-profile, .043\" gauge, 56-drive-link replacement designed to restore cutting performance on compatible 16\" bars with reduced kickback.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain from Oregon is engineered for homeowners and pros who need a precise fit for 16\" guide bars that require a 3\/8\" low-profile pitch and .043\" (1.1 mm) gauge. It offers compatibility with many modern saws across brands like Makita, DeWalt, Ego, Greenworks and Milwaukee, and carries low-kickback features tested against recognized safety standards. Use it when your original chain is worn, damaged or when you want a dependable spare that meets ANSI and CSA kickback performance provisions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saw models will this chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis chain is sized for 3\/8\" Low-Profile pitch, .043\" gauge guide bars and contains 56 drive links for 16\" bars. It fits a wide range of gas and battery chainsaws, but you should always confirm the owner's manual before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands include Makita, DeWalt, Ego, Greenworks, Milwaukee, Poulan, Echo, Craftsman and others.\u003c\/li\u003e\n  \u003cli\u003eExamples: Makita DUC400\/EA3500 series, DeWalt DCC690 series, Ego CS1600\/CS1604, Greenworks DigiPro 40V models, Milwaukee M18 models.\u003c\/li\u003e\n  \u003cli\u003eIntended for saws with up to ~42cc or equivalent battery-powered motors that accept a 16\" bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain reduce kickback while maintaining cutting power?\u003c\/h3\u003e\n\u003cp\u003eThe chain design combines bumper drive links with controlled depth gauges to lower the chance of kickback without sacrificing efficient wood removal. It was tested to meet the kickback performance requirements of ANSI B175.1-2012 and CSA Z62.3.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBumper drive link layout smooths bar engagement at the nose.\u003c\/li\u003e\n  \u003cli\u003eDepth gauge profiling limits excessive bite for safer operation.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated cutters preserve edge life and resist wear during heavy use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstalling the chain follows the same steps as replacing any standard 16\" chain: remove the old chain, fit the chain around the bar and sprocket, then tension properly. Routine maintenance like sharpening, correct tensioning and lubrication will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck and set proper tension before each use—no sagging, but not over-tightened.\u003c\/li\u003e\n  \u003cli\u003eUse bar and chain oil and keep the bar groove and sprocket nose clean.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters when performance drops; maintain depth gauges if required after several sharpenings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain perform for both battery and gas chainsaws?\u003c\/h3\u003e\n\u003cp\u003eYes—this Oregon chain is compatible with many modern battery and gasoline saws that accept a 3\/8\" LP, .043\" gauge, 56-drive-link chain. Performance depends on correct fit and routine care rather than the power source.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 16\" bars on battery models like Ego, Greenworks, DeWalt and Milwaukee.\u003c\/li\u003e\n  \u003cli\u003eAlso fits small gas saws such as compatible Poulan and Echo models listed by manufacturers.\u003c\/li\u003e\n  \u003cli\u003eEnsures consistent cutting if sharpened and lubricated properly regardless of engine type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Oregon replacement chain is aimed at homeowners, landscapers and tradespeople who need a reliable, low-kickback chain for a 16\" bar that specifies 3\/8\" low-profile pitch and .043\" gauge with 56 drive links. Choose it if you want a manufacturer-backed option that fits many popular cordless and gas saws, meets established kickback standards, and is straightforward to install and maintain.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Oregon chain compatible with my 16\" DeWalt battery saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your DeWalt model requires 3\/8\" low-profile pitch, .043\" gauge and 56 drive links for a 16\" bar, this chain will be compatible. Verify your saw's manual or bar stamping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the chain reduce kickback compared to full-profile chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—its bumper drive link and depth gauge design reduce kickback potential while preserving cutting performance, meeting ANSI and CSA kickback requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54198931292344,"sku":"B000H2W40U","price":54.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-front-packaging.jpg?v=1790591136"},{"product_id":"oregon-18in-chainsaw-chain-3-8in-lp-050in-gauge-62-drive-links-low-kickback-hard-chromed-cutters","title":"Oregon 18in Chainsaw Chain 3\/8in LP .050in Gauge 62 Drive Links — Low-Kickback, Hard-Chromed Cutters","description":"\u003cp\u003e\u003cstrong\u003eOregon’s 18-inch saw chain with 3\/8\" low-profile pitch, .050\" (1.3 mm) gauge and 62 drive links is a premium, low-kickback replacement chain built for smooth, efficient cutting and easy sharpening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain is engineered to match many popular chainsaw makes and models that require a 3\/8\" low-profile pitch and .050\" gauge, and it comes with 62 drive links for an 18\" guide bar. The cutters are hard-chromed for extended edge life and consistent bite, while the chain’s design balances cutting performance with reduced kickback. Before buying, confirm your chainsaw’s bar length, drive link count, pitch and gauge to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws will this Oregon chain fit?\u003c\/h3\u003e\n\u003cp\u003eThis chain fits chainsaws that call for an 18\" bar, 3\/8\" low-profile pitch and .050\" gauge with 62 drive links. It is compatible with many consumer and light-professional models across brands, but always compare the specified drive link count and pitch to the saw manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon brand compatibility: Craftsman, Echo, Homelite, Husqvarna (models with 3\/8\" LP sprocket), Kobalt, McCulloch, Poulan, Remington and more.\u003c\/li\u003e\n  \u003cli\u003eExample model groups: Echo CS-3000 series, Husqvarna 240\/235E series (verify LP sprocket), Poulan 2150\/4218 series, Remington LD4018 series.\u003c\/li\u003e\n  \u003cli\u003eRequired specs: 18\" bar, 62 drive links, 3\/8\" low-profile pitch, .050\" gauge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chain reduce kickback while keeping cutting power?\u003c\/h3\u003e\n\u003cp\u003eThe chain uses a notched bumper drive link and depth gauge geometry engineered for lower kickback characteristics without sacrificing chip flow. That creates a safer feel at the tip while maintaining smooth cutting action through wood.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNotched bumper drive link to lower tip reaction.\u003c\/li\u003e\n  \u003cli\u003eChamfered cutters that balance bite and chip clearance.\u003c\/li\u003e\n  \u003cli\u003eSymmetrical tie straps for easier joining and consistent tension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and maintenance features?\u003c\/h3\u003e\n\u003cp\u003eOregon’s cutters are hard-chromed to resist wear and keep a sharp edge longer. The chain is designed for straightforward sharpening and replacement, so routine maintenance returns consistent cutting performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHard-chromed cutter faces for extended edge life.\u003c\/li\u003e\n  \u003cli\u003eEasy-to-sharpen cutter profiles for field maintenance.\u003c\/li\u003e\n  \u003cli\u003eFour-way symmetrical tie straps simplify connecting the chain loop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this chain is right for my saw?\u003c\/h3\u003e\n\u003cp\u003eCheck the owner’s manual or the existing chain\/bar for pitch, gauge and drive link count. Measure the bar length and count the drive links; if they match 18\", 3\/8\" LP, .050\" and 62 respectively, this chain is a direct replacement for compatible models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure bar length from tip to base: 18\" required.\u003c\/li\u003e\n  \u003cli\u003eCount drive links along the chain: must be 62 links.\u003c\/li\u003e\n  \u003cli\u003eVerify pitch stamped on bar or original chain: 3\/8\" low-profile pitch.\u003c\/li\u003e\n  \u003cli\u003eConfirm gauge: .050\" (1.3 mm) guide slot width.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon 18\" chain is aimed at homeowners, landscapers and light-duty logging users who need a durable, easy-to-maintain replacement for saws that use a 3\/8\" low-profile pitch and .050\" gauge. It suits anyone wanting a balance of reduced tip reaction and dependable cutting performance for general pruning, limb removal and firewood tasks—provided their saw matches the listed specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Husqvarna 240?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Husqvarna 240 uses a 3\/8\" low-profile pitch, .050\" gauge and an 18\" bar with 62 drive links, this chain will fit. Verify the sprocket type first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I sharpen this chain in the field?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hard-chromed cutters have a straightforward profile that can be sharpened with a round file sized for 3\/8\" LP cutter profiles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199128424632,"sku":"B00004RA81","price":56.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-18in-chain-front.jpg?v=1790592077"},{"product_id":"oregon-14-chainsaw-chain-3-8-lp-050-gauge-50-drive-links-advancecut-s50-low-kickback-lubritec","title":"Oregon 14\" Chainsaw Chain — 3\/8\" LP, .050\" Gauge, 50 Drive Links — AdvanceCut S50 Low-Kickback, LubriTec","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon AdvanceCut S50 is a 14-inch replacement chainsaw chain (3\/8\" low-profile pitch, .050\" gauge, 50 drive links) engineered for smoother cuts, longer wear, and reduced kickback risk.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for landscapers, homeowners, and pro users who need a dependable 14\" chain, the AdvanceCut S50 balances cutting performance with easier maintenance. It pairs a heat-treated semi-chisel tooth design with Oregon's LubriTec oiling technology to reduce friction and extend guide bar life. Tested to ANSI and CSA kickback standards, this chain fits many popular chainsaw models and works on engines up to 42 cc.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this chain improve cutting and wear life?\u003c\/h3\u003e\n\u003cp\u003eThe Oregon S50 uses a heat-treated semi-chisel tooth profile that resists bluntness from dirt and debris while still delivering clean cuts. Heat treatment strengthens the cutter teeth, slowing wear, and the semi-chisel shape is easier to sharpen in the field than full-chisel designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated semi-chisel cutters for durability and easier sharpening\u003c\/li\u003e\n  \u003cli\u003e3\/8\" low-profile pitch and .050\" gauge match a broad range of bars and sprockets\u003c\/li\u003e\n  \u003cli\u003e50 drive links configured for 14\" guide bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and vibration features does the chain offer?\u003c\/h3\u003e\n\u003cp\u003eThis chain is built to lower vibration and reduce kickback likelihood compared with standard aggressive chains. It has been tested to meet the kickback performance requirements of ANSI B175.1-2012 and CSA Standard Z62.3, offering added reassurance when used responsibly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-vibration design for more comfortable use over time\u003c\/li\u003e\n  \u003cli\u003eLow-kickback construction compliant with ANSI and CSA standards\u003c\/li\u003e\n  \u003cli\u003eSuitable for routine cutting where reduced snap-back is important\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does LubriTec help maintain the chain and bar?\u003c\/h3\u003e\n\u003cp\u003eOregon’s LubriTec is an engineered oiling system that improves lubricant retention along the bar and chain. Better lubrication lowers friction between chain and guide bar, minimizing heat and wear so components last longer and require less frequent replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced oil retention to reduce friction and heat buildup\u003c\/li\u003e\n  \u003cli\u003eHelps extend guide bar life and maintain cutting consistency\u003c\/li\u003e\n  \u003cli\u003eWorks with standard bar oil — no special lubricant required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich chainsaws is this chain compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe AdvanceCut S50 fits a wide range of 14\" chainsaw setups with a 3\/8\" LP pitch and .050\" gauge that accept 50 drive links. It's suitable for saws up to 42 cc and is commonly used as a replacement for many homeowner and light-pro models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with saw sizes up to 42 cc\u003c\/li\u003e\n  \u003cli\u003eFits models like STIHL MS 170, MS 180, MS 180 C and Remington RM1425 Limb \u0026amp; Trim\u003c\/li\u003e\n  \u003cli\u003eVerify pitch, gauge, and drive link count before installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon AdvanceCut S50 is ideal for landscape professionals, property owners, and weekend woodcutters who need a reliable 14\" replacement chain that balances cutting efficiency, durability, and safety. If you want a chain that is easier to maintain, offers improved bar life through LubriTec, and meets recognized kickback standards, the S50 is a practical choice. Always confirm your saw’s pitch, gauge, and drive link count, keep the chain properly tensioned and lubricated, and follow the chainsaw manufacturer’s safety instructions when installing and using the chain.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 14\" saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your saw uses a 3\/8\" low-profile pitch, .050\" gauge, and accepts 50 drive links, the S50 will fit. Confirm those three specs and bar length first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this chain on a saw larger than 42 cc?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The S50 is designed for saws up to 42 cc. Using it on larger engines may reduce performance and durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199137337528,"sku":"B00004RA8D","price":56.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-front-packaging-14in-advancecut-s50.jpg?v=1790592189"},{"product_id":"oregon-magnum-gatorline-095-in-trimmer-line-226-ft-heavy-duty-square-profile-dual-polymer-durability","title":"Oregon Magnum Gatorline .095 in Trimmer Line — 226 ft Heavy-Duty Square Profile, Dual-Polymer Durability","description":"\u003cp\u003e\u003cstrong\u003eOregon Magnum Gatorline .095\" x 226-foot is a heavy-duty, square-profile trimmer line built for longer life, tougher cutting, and reduced breakage on professional and homeowner string trimmers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a reliable replacement string that slices through thick grass, weeds, and light brush while fitting most standard trimmer heads, this Magnum Gatorline balances durability with cutting power. Its dual-polymer construction, reinforced core, and weld-resistant outer layer reduce line bonding and frequent reloads. Supplied on a 226-foot donut, the .095-inch gauge is a common size that works with many curved- and straight-shaft trimmers, gas or battery powered.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the square profile improve cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe square cross-section creates four sharp edges that bite into vegetation for cleaner, faster cuts than round line. That shape helps deliver straighter passes and improved throughput when dealing with dense or fibrous weeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAggressive cutting edges for faster material removal\u003c\/li\u003e\n  \u003cli\u003eCleaner finish along borders and beds\u003c\/li\u003e\n  \u003cli\u003eReduces repeated passes, saving time and fuel or battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this .095\" line fit my trimmer and head type?\u003c\/h3\u003e\n\u003cp\u003eMagnum Gatorline .095\" is compatible with most standard fixed-line, semi-automatic bump-feed, and automatic bump-feed heads, as well as a wide range of trimmer brands. Always cross-check your trimmer manual to confirm maximum recommended line diameter before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many popular models from Echo, Stihl, Husqvarna, Ryobi and others\u003c\/li\u003e\n  \u003cli\u003eWorks with curved and straight shafts, gas, corded, and battery units\u003c\/li\u003e\n  \u003cli\u003eNot suited for trimmers that require smaller-diameter lines per manufacturer specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this line more durable and less likely to tangle or weld in the spool?\u003c\/h3\u003e\n\u003cp\u003eOregon combines a high-strength inner core with a weld-resistant outer layer and dual-polymer formulation. The reinforced core reduces breakage under impact, while the special outer surface minimizes the tendency of adjacent turns of line to fuse together in high-heat or prolonged use situations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid-reinforced inner structure for impact resistance\u003c\/li\u003e\n  \u003cli\u003eDual-polymer outer layer that resists bonding in the head\u003c\/li\u003e\n  \u003cli\u003eLonger service life means fewer reloads and less downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much line comes and what jobs is this best for?\u003c\/h3\u003e\n\u003cp\u003eThis product ships on a 226-foot donut (approximately one pound), giving plenty of line for multiple reloads. Its heavy-duty design is ideal for landscapers and homeowners tackling light-to-medium brush, tall grass, and repeated edging where line performance and longevity matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e226-foot spool on a convenient donut for easy cutting and feeding\u003c\/li\u003e\n  \u003cli\u003eGreat for commercial property maintenance and demanding home yards\u003c\/li\u003e\n  \u003cli\u003eBest for weeds, grass, and occasional brush; not a heavy-woody cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon Magnum Gatorline .095\" x 226-foot is aimed at professionals and serious homeowners who want a robust, long-lasting trimmer line that reduces breakage and reload frequency. Choose this line if you use bump-feed or fixed-head trimmers from mainstream brands and need aggressive cutting performance with minimal downtime. If your trimmer requires a smaller diameter or you are cutting large woody stems regularly, check your manual and consider a different gauge or a dedicated brush-cutting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will .095\" line fit my trimmer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your trimmer manual for maximum line diameter; .095\" fits many common bump-feed and fixed heads but may be too large for some models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does the 226-foot donut last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Duration depends on use, but 226 feet typically provides multiple reloads for regular residential or light commercial jobs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199335977144,"sku":"B0018U25MM","price":60.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-magnum-gatorline-front-packaging.jpg?v=1790593576"},{"product_id":"oregon-16-chainsaw-chain-3-8-lp-043-gauge-55-link-low-kickback-replacement-for-16-bar","title":"Oregon 16\" Chainsaw Chain 3\/8\" LP .043\" Gauge 55-Link — Low-Kickback Replacement for 16\" Bar","description":"\u003cp\u003e\u003cstrong\u003eOregon 16\" chainsaw chain with 3\/8\" low-profile pitch, .043\" gauge and 55 drive links is a low-kickback replacement chain engineered for compatible 16\" bars.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement saw chain from Oregon is made for homeowners and pros using chainsaws that require a 3\/8\" low-profile pitch, .043\" (1.1 mm) gauge and 55 drive links. It’s designed to fit many popular models from major brands and swaps onto a 16\" guide bar. The construction balances cutting performance with reduced kickback features to match modern safety expectations when used and maintained correctly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich chainsaws will this Oregon chain fit?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility by matching your saw’s bar length, pitch, gauge and drive link count. This chain fits a wide range of Stihl saws and other models that list a 3\/8\" LP pitch, .043\" gauge, 55 drive links and a 16\" bar.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon Stihl models supported: 017, 018, 019, MS 170, MS 171, MS 180 series and many E\/ MSE variants.\u003c\/li\u003e\n  \u003cli\u003eAlso a replacement for part numbers like Stihl 3610 005 0055 and Husqvarna H38-55.\u003c\/li\u003e\n  \u003cli\u003eDouble-check your owner’s manual or the stamped numbers on the bar for exact fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the low-kickback design affect cutting?\u003c\/h3\u003e\n\u003cp\u003eThe chain incorporates a bumper drive link and depth gauge arrangement that reduces kickback energy during certain contact events. It still delivers effective wood removal while giving a safer cutting profile than full-skip or non-low-kickback chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDepth gauges limit bite depth to reduce sudden kickback force.\u003c\/li\u003e\n  \u003cli\u003eBumper-style drive links help moderate contact with hard surfaces.\u003c\/li\u003e\n  \u003cli\u003eMaintaining proper tension and sharpness preserves the low-kickback performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this replacement chain?\u003c\/h3\u003e\n\u003cp\u003eMeasure four key specifications: pitch, gauge, drive link count and bar length. Even small differences will prevent correct fit and can harm performance or safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePitch: must be 3\/8\" low-profile (3\/8\" LP).\u003c\/li\u003e\n  \u003cli\u003eGauge: must match .043\" (1.1 mm) guide bar slot width.\u003c\/li\u003e\n  \u003cli\u003eDrive links: chain must have 55 drive links for a 16\" bar setup.\u003c\/li\u003e\n  \u003cli\u003eConfirm bar length stamped on the bar or specified in the manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain the Oregon saw chain to keep it cutting well?\u003c\/h3\u003e\n\u003cp\u003eRoutine care keeps the chain safer and extends service life. Regular filing, correct tensioning and consistent lubrication are the main tasks for dependable performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen cutters to the recommended angle and profile when dull.\u003c\/li\u003e\n  \u003cli\u003eSet chain tension so it snaps back onto the bar but can still be pulled by hand.\u003c\/li\u003e\n  \u003cli\u003eKeep the bar nose and oil ports clean and use chain oil for lubrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon 16\" 3\/8\" LP .043\" gauge chain is intended for homeowners, landscapers and light pro users who run compatible chainsaws (including many Stihl models) and want a reliable, low-kickback replacement. If you operate a saw with up to a 42cc engine and require a 16\" bar chain with 55 drive links, this product offers a straightforward swap-in solution engineered by an established chain manufacturer. Always verify your saw’s specifications and follow the owner’s manual for installation, tensioning and safety procedures before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Stihl MS 180?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your MS 180 uses a 16\" bar with 3\/8\" LP pitch, .043\" gauge and 55 drive links, this Oregon chain fits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain low-kickback certified?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The chain met ANSI B175.1-2012 kickback performance testing and aligns with CSA Z62.3 low-kickback design features.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199456039096,"sku":"B00407YHFI","price":62.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-packaging_355d7c1c-b49b-4230-939c-0214a58b214d.jpg?v=1790594733"},{"product_id":"oregon-magnum-gatorline-trimmer-line-105-in-x-95-ft-heavy-duty-aramid-reinforced-square-profile","title":"Oregon Magnum Gatorline Trimmer Line .105 in x 95 ft - Heavy-Duty Aramid-Reinforced, Square Profile","description":"\u003cp\u003e\u003cstrong\u003eOregon Magnum Gatorline .105\" x 95-foot is a heavy-duty, aramid-reinforced square trimmer line built to cut through grass, weeds and light brush with extended life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor landscapers, grounds crews and homeowners who demand longer run times and fewer breakages, the Oregon Magnum Gatorline pairs a thick .105-inch gauge with a dual-polymer construction and aramid fiber reinforcement. The robust outer skin resists welding and wear while the tough inner core stands up to impacts and twisting. It’s supplied on a convenient 1\/2-pound donut to reload reels quickly without messy winding.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this trimmer line for heavy jobs?\u003c\/h3\u003e\n\u003cp\u003eMagnum Gatorline is designed to last through tough mowing sessions: the square cross-section delivers aggressive cutting edges and the inner aramid fibers add tensile strength to resist snapping. The dual-layer structure minimizes fraying and melting under heat, so you’ll replace line less often on demanding jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e.105-inch diameter for heavier cutting force\u003c\/li\u003e\n  \u003cli\u003eDual-polymer construction for abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eAramid fiber reinforcement to reduce breakage\u003c\/li\u003e\n  \u003cli\u003eSquare profile for efficient, aggressive cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this line fit my trimmer and how much is included?\u003c\/h3\u003e\n\u003cp\u003eThe line’s .105\" diameter fits most professional and high-capacity consumer trimmer heads rated for thicker gauges; always check your trimmer manual for compatible diameters. Oregon supplies the line on a 1\/2-pound donut with 95 feet of line, giving you enough length for multiple reloads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e.105\" gauge compatible with heavy-duty trimmer heads\u003c\/li\u003e\n  \u003cli\u003e95-foot donut provides multiple windings or single long spools\u003c\/li\u003e\n  \u003cli\u003eEasy-to-handle donut shape for faster reloading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the line perform in daily landscape work?\u003c\/h3\u003e\n\u003cp\u003eThe square shape slices through grass and thin-stemmed weeds cleanly while the reinforced core holds up when you encounter tougher brush or hidden debris. Expect more uptime and fewer line changes, making it a practical choice for commercial routes and extensive property maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEfficient cutting on low grass and grass-like weeds\u003c\/li\u003e\n  \u003cli\u003eHolds shape when trimming near rocks or fence lines\u003c\/li\u003e\n  \u003cli\u003eReduces downtime from frequent line replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there storage or installation tips to get the most life from the line?\u003c\/h3\u003e\n\u003cp\u003eStore the donut in a cool, dry place away from direct sunlight to prevent polymer breakdown. When loading, avoid kinking the line and wind evenly to prevent feeding issues; trimming at a moderate speed helps reduce heat buildup and limit premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep donuts sealed and out of UV exposure\u003c\/li\u003e\n  \u003cli\u003eWind line smoothly into trimmer spools to prevent tangle\u003c\/li\u003e\n  \u003cli\u003eTrim at recommended speeds to lower line wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Oregon Magnum Gatorline .105\" x 95-foot is aimed at professional landscapers, municipal crews and homeowners with large yards or frequent trimming needs who want a thicker, longer-lasting line. If your work often encounters dense grass, rough terrain or occasional brush, this reinforced, square-profile line reduces the time you spend reloading and keeps equipment running longer between service stops.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What diameter is this trimmer line?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: .105-inch diameter, suitable for heavy-duty trimming tasks when compatible with your trimmer head.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much line comes on the donut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 1\/2-pound donut contains 95 feet of line, enough for multiple reloads or extended single-spool fills.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199466721464,"sku":"B0018TY634","price":53.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-magnum-gatorline-front-packaging_63f24239-67f2-4238-8c22-4b350a3eb422.jpg?v=1790594868"},{"product_id":"oregon-chainsaw-chain-20-bar-3-8-pitch-050-gauge-72-link-full-chisel-lubritec-for-faster-low-vibration-cutting","title":"Oregon chainsaw chain 20\" bar 3\/8\" pitch .050\" gauge 72-link — full-chisel, LubriTec for faster, low-vibration cutting","description":"\u003cp\u003e\u003cstrong\u003eOregon 72EXJ is a 72-drive-link, full-chisel chainsaw chain engineered for smoother, faster cutting on 20\" bars with 3\/8\" pitch and .050\" gauge.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis chainsaw chain replaces the 72JGX and combines a reshaped cutter profile with Oregon's proprietary grind technology to deliver consistent sharpness, reduced vibration and improved chip ejection. Built for mid- to large-size saws (50–100 cc), the chain features LubriTec oil retention, blued corrosion protection and filing guides that make routine maintenance straightforward. Whether you swap a worn chain or outfit a spare for heavy yard work, the 72EXJ is balanced for aggressive cutting and durable service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this chain improve cutting performance?\u003c\/h3\u003e\n\n\u003cp\u003eThe reshaped full-chisel cutters and precise factory grind maintain a keen edge and slice through wood with less binding. Low-vibration geometry helps steadier handling, so you make cleaner cuts with less fatigue. Skip-sequence links increase space for chips to clear, which is especially helpful on larger logs and longer bars.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull-chisel cutters for aggressive, fast material removal\u003c\/li\u003e\n  \u003cli\u003eSkip sequence design improves chip flow and reduces clogging\u003c\/li\u003e\n  \u003cli\u003eLow-vibration profile for steadier cuts and less operator fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance features make this chain easier to care for?\u003c\/h3\u003e\n\n\u003cp\u003eOregon added practical indicators and surface finishes that simplify sharpening and reduce downtime. Expanded top-plate and depth-gauge filing guides help you restore the factory geometry consistently. LubriTec and blued cutters protect metal surfaces and keep the chain running cooler and cleaner between services.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTop-plate and depth-gauge filing indicators for accurate re-sharpening\u003c\/li\u003e\n  \u003cli\u003eGold loop start mark to identify sharpening start and stop points\u003c\/li\u003e\n  \u003cli\u003eLubriTec oil-retaining finish and blued cutters for less friction and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich saws and cutting tasks is the 72EXJ best suited for?\u003c\/h3\u003e\n\n\u003cp\u003eThis chain is optimized for chainsaws with 50–100 cc engines using a 20\" bar and a 3\/8\" pitch .050\" gauge. It excels at felling, limbing and crosscutting larger logs where fast, consistent bite and good chip evacuation matter most. The robust OCS-01 steel construction makes it a dependable option for demanding weekend work or professional tasks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for 20\" guide bars with 72 drive links\u003c\/li\u003e\n  \u003cli\u003eRecommended for saws in the 50–100 cc range\u003c\/li\u003e\n  \u003cli\u003eSuited to felling, bucking, piling and general heavy-duty cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I match and install this chain correctly?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm your saw’s bar length, chain pitch (3\/8\"), gauge (.050\") and drive link count (72) before ordering. Installing requires basic tools: wear gloves, release bar tension, loop the chain over the bar and sprocket, then re-tension according to the saw maker’s guide. After installation, run at low speed to check lubrication and final tension adjustments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVerify bar length and chain specs: 20\", 3\/8\" pitch, .050\" gauge, 72 links\u003c\/li\u003e\n  \u003cli\u003eInstall with bar tension released, then set proper tension and test oiling\u003c\/li\u003e\n  \u003cli\u003eUse the filing indicators and gold loop start marker for maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Oregon 72EXJ chain is aimed at homeowners, arborists and landscape pros who use mid-sized chainsaws and need an aggressive, durable chain that’s easier to sharpen and stays lubricated longer. If you run a 20\" bar on a 50–100 cc saw and want faster cutting with improved chip clearance and lower vibration, this chain is a practical upgrade or replacement option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 20\" bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your bar requires a 3\/8\" pitch, .050\" gauge and 72 drive links, this Oregon 72EXJ chain will fit correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I sharpen this chain at home?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the expanded top-plate and depth gauge indicators plus the gold loop start marker make accurate home sharpening straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199494672568,"sku":"B0857ZZPS5","price":65.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-72exj-front-packaging.jpg?v=1790595371"},{"product_id":"oregon-12-guide-bar-3-8-lp-chainsaw-chain-combo-45-link-050-gauge-low-kick-lubritec","title":"Oregon 12\" Guide Bar \u0026 3\/8\" LP Chainsaw Chain Combo — 45-Link, .050\" Gauge, Low-Kick LubriTec","description":"\u003cstrong\u003eOregon's 12\" bar and 3\/8\" LP (.050 gauge) chain combo is a ready-to-install guide bar and low-profile chain built for homeowners and light pros who want a smooth, low-vibration cutting setup.\u003c\/strong\u003e\n\n\u003cp\u003eThis complete 12-inch guide bar and matching 3\/8\" low-profile chain from Oregon pairs a durable reversible bar with Chamfer Chisel cutters and the LubriTec oiling design. It’s engineered to reduce vibration and kickback while keeping friction low, so you spend less time tuning and more time cutting. The chain includes an ID link for faster, accurate replacement and fits many popular saw makes and models up to about 42cc.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain fit my chainsaw?\u003c\/h3\u003e\n\u003cp\u003eIf your saw uses a 12\" guide bar, an A041 motor mount pattern, and accepts a chain with 45 drive links, this combo will fit. The chain pitch is 3\/8\" low profile with a .050\" gauge, the standard for many homeowner saws. Check your saw’s manual or the existing bar stamping for those three details before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 12\" guide bar users; 45 drive links on the chain\u003c\/li\u003e\n  \u003cli\u003e3\/8\" low profile pitch and .050\" gauge — confirm with your saw's specs\u003c\/li\u003e\n  \u003cli\u003eCompatible with many models from Husqvarna, Craftsman, Echo, Makita, Kobalt, Greenworks and similar up to ~42cc\u003c\/li\u003e\n  \u003cli\u003eID link included to simplify matching and installing replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain reduce vibration and kickback?\u003c\/h3\u003e\n\u003cp\u003eThe low-profile 3\/8\" pitch and the chain’s low-kick design combine to lessen both vibration and sudden upward movement. Chamfer Chisel cutter geometry gives an efficient bite while remaining more forgiving to occasional users than aggressive professional cutters. The result is comfortable handling and steadier cuts for yard work or light jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-profile 3\/8\" pitch for smoother operation and reduced vibration\u003c\/li\u003e\n  \u003cli\u003eLow-kick design to lower the chance of dangerous rebound\u003c\/li\u003e\n  \u003cli\u003eChamfer Chisel cutters balance cutting speed with user-friendly performance\u003c\/li\u003e\n  \u003cli\u003eReversible guide bar extends service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and lubrication features should I expect?\u003c\/h3\u003e\n\u003cp\u003eOregon’s LubriTec system helps maintain a consistent oil film between chain and bar, reducing friction and wear. Routine maintenance remains simple: keep the bar nose, sprocket, tension, and lubrication checked, sharpen the cutters as needed, and replace the chain when worn. The included ID link makes reordering and fitting a direct swap, minimizing downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubriTec oiling reduces friction and prolongs chain and bar life\u003c\/li\u003e\n  \u003cli\u003eID link helps identify replacement chain quickly and accurately\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters periodically; inspect sprocket and tension regularly\u003c\/li\u003e\n  \u003cli\u003eReversible bar halves the visible wear cycle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this combo handle heavier tasks or professional jobs?\u003c\/h3\u003e\n\u003cp\u003eWhile robust for homeowner and light professional use, this 12\" bar and low-profile chain is optimized for occasional commercial tasks rather than heavy, continuous professional logging. It suits pruning, firewood splitting into manageable pieces, storm cleanup, and general property maintenance where reduced vibration and easier handling are priorities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for homeowners and occasional commercial users\u003c\/li\u003e\n  \u003cli\u003eGood for pruning, small logs, and property cleanup up to moderate loads\u003c\/li\u003e\n  \u003cli\u003eNot intended for continuous high-volume professional cutting\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI B175.1-2012 recoil performance requirements for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Oregon 12\" bar and 3\/8\" LP (.050 gauge) chain combo is best for homeowners, landscapers, and light-duty contractors who need a dependable, low-vibration cutting setup that’s easy to maintain. If you want a safer, smoother-cutting chain that fits common 12\" saws and trims replacement time with an ID link, this kit offers a practical, durable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit my 12-inch chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your saw has a 12\" bar, A041 motor mount, and accepts 45 drive links with 3\/8\" LP pitch and .050\" gauge, it will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen this chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen whenever cutting efficiency drops or cutters show rounded edges—typically after several hours of use depending on wood type.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199545462968,"sku":"B000R8BDGA","price":71.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-bar-chain-front-packaging.jpg?v=1790596243"},{"product_id":"oregon-chainsaw-chain-20-3-8-pitch-050-gauge-72-drive-links-low-kickback-lubri-tec-oiling","title":"Oregon Chainsaw Chain 20\" 3\/8\" Pitch .050\" Gauge 72 Drive Links — Low-Kickback, Lubri-Tec Oiling","description":"\u003cp\u003e\u003cstrong\u003eThe Oregon D72 is a 20-inch, 3\/8\" pitch, .050\" gauge chainsaw chain with 72 drive links engineered for reliable cutting performance and ANSI\/CSA low-kickback safety compliance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain is built to fit a wide range of consumer and professional saws that require a 3\/8\" pitch and .050\" gauge with 72 drive links. Oregon designed the D72 for smooth cutting, reduced vibration, and extended wear life, using heat-treated steel, chrome outer layers and hardened rivets. It's compatible with many Stihl, Husqvarna, Makita, Poulan and other models, and it includes Lubri-Tec automatic oiling to help keep the chain lubricated during use.\u003c\/p\u003e\n\n\u003ch3\u003eWhich chainsaw models will this Oregon D72 chain fit?\u003c\/h3\u003e\n\u003cp\u003eThe D72 is intended for bars and sprocket noses that accept a 20\" chain with 3\/8\" pitch, .050\" gauge and 72 drive links. It fits many common homeowner and professional saw models across major brands. Always cross-check your bar length, pitch and gauge against your operator's manual before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brand examples: Stihl, Husqvarna, Makita, Poulan and Dolmar.\u003c\/li\u003e\n  \u003cli\u003eCommon Stihl fits: MS 260, MS 290, MS 310, MS 311, MS 391 and similar 3\/8\" models.\u003c\/li\u003e\n  \u003cli\u003eCommon Husqvarna fits: 55 Rancher, 261, 357XP, 359, 365, 455 Rancher, 560\/562\/575 series.\u003c\/li\u003e\n  \u003cli\u003eAlso fits various Poulan and Makita models listed in the saw's spec sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the D72 chain manage safety and kickback?\u003c\/h3\u003e\n\u003cp\u003eOregon engineered this chain to meet recognized low-kickback performance standards. It has design features that reduce the severity of kickback while maintaining effective cutting, helping users feel more secure during typical cutting tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested to meet ANSI B175.1 low-kickback performance provisions.\u003c\/li\u003e\n  \u003cli\u003eMeets CSA Z62.3 kickback performance requirements for reduced risk.\u003c\/li\u003e\n  \u003cli\u003eProfiled cutters and guard features balance safety with cutting speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance features affect durability and cutting quality?\u003c\/h3\u003e\n\u003cp\u003eThe D72 combines heat-treated semi-chisel cutters, a chrome wear layer and hardened rivets to improve longevity and cutting consistency. That construction helps the chain tolerate debris, retain sharpness longer and require fewer mid-job adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-chisel teeth for smooth, consistent cutting and easier re-sharpening.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated steel for strength and reduced wear under load.\u003c\/li\u003e\n  \u003cli\u003eChrome outer layer and hardened rivets to extend service life and reduce stretch.\u003c\/li\u003e\n  \u003cli\u003eLubri-Tec automatic oiling distributes oil to key joints and cutters for longer runtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain this replacement chain?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same steps as most chainsaw chains: match pitch and gauge, fit the chain on the bar and sprocket, adjust tension, and verify proper lubrication. Regular maintenance keeps cutting performance consistent and extends chain life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify 3\/8\" pitch, .050\" gauge and 72 drive links before fitting.\u003c\/li\u003e\n  \u003cli\u003eSet correct tension: snug on the bar with a slight sag when cold.\u003c\/li\u003e\n  \u003cli\u003eRun the Lubri-Tec oiling system and keep the bar reservoir topped up with chain oil.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters as needed and replace the chain if rivets show excessive wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon D72 is aimed at homeowners, arborists and contract cutters who use 20\" bars and want a dependable, long-wearing replacement chain with low-kickback performance. It's a good choice if you need broad saw compatibility, reduced vibration during extended jobs and an easy-to-maintain chain backed by Oregon's manufacturing and warranty support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit a 20-inch bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Oregon D72 is made for a 20\" bar with 3\/8\" pitch, .050\" gauge, and 72 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a low-kickback chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The D72 meets ANSI B175.1 and CSA Z62.3 low-kickback performance requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199580393656,"sku":"B00004RB7R","price":71.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-d72-20in-front-packaging.jpg?v=1790596598"},{"product_id":"oregon-chainsaw-chain-for-24-bar-3-8-pitch-050-gauge-84-drive-links-with-low-vibration-blued-cutters","title":"Oregon Chainsaw Chain for 24\" Bar — 3\/8\" Pitch .050\" Gauge, 84 Drive Links with Low-Vibration Blued Cutters","description":"\u003cp\u003e\u003cstrong\u003eOregon 72EXL is a 24\" chainsaw chain with a 3\/8\" pitch, .050\" gauge and 84 drive links built for smoother, sharper cutting and longer life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain pairs Oregon engineering—reshaped cutters and a proprietary grind—with features intended to reduce vibration and make maintenance easier. It replaces the older 72LGX model and is designed for mid- to large-frame saws (50–100 cc). Built-in indicators and wear-resistant finishes help you keep the chain sharp and running reliably through repeated jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this chain improve cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe 72EXL uses a reshaped full-chisel cutter and a specialized grind process to produce consistent, aggressive bites into wood with less effort. Low-vibration geometry reduces fatigue and helps maintain smoother operation across different cuts. Bluing on the cutters adds corrosion resistance so the teeth stay sharper longer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel cutter profile for fast, efficient cutting\u003c\/li\u003e\n  \u003cli\u003eProprietary grinding process for consistent sharpness\u003c\/li\u003e\n  \u003cli\u003eBlued cutters resist rust and preserve edge life\u003c\/li\u003e\n  \u003cli\u003eLow-vibration design for steadier handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance features make sharpening easier?\u003c\/h3\u003e\n\u003cp\u003eOregon added visible filing points and a gold loop start indicator so you can sharpen consistently and quickly. Expanded top-plate filing indicators and depth-gauge markers guide correct filing angles and depth to restore cutting geometry. These reference marks cut guesswork out of routine sharpening and extend safe cutting life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpanded top-plate filing indicators for precise filing\u003c\/li\u003e\n  \u003cli\u003eDepth-gauge markers to set the correct tooth height\u003c\/li\u003e\n  \u003cli\u003eGold loop start indicator marks the sharpening start\/stop point\u003c\/li\u003e\n  \u003cli\u003eWorks with standard round and flat files\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain work on my saw and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eDesigned for chainsaw engines in the 50–100 cc range, the 72EXL fits a 24\" guide bar with a 3\/8\" pitch and .050\" gauge, using 84 drive links. Durable OCS-01 steel and LubriTec lubrication channels reduce wear, which helps the chain maintain performance over many cut cycles. Actual lifespan depends on use, wood type, and proper maintenance, but these features increase service life compared with untreated chains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 24\" bars with 3\/8\" pitch and .050\" gauge\u003c\/li\u003e\n  \u003cli\u003e84 drive links for correct fit and tension\u003c\/li\u003e\n  \u003cli\u003eOCS-01 steel construction for improved durability\u003c\/li\u003e\n  \u003cli\u003eLubriTec reduces friction for longer life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits does LubriTec and blued cutter finish provide?\u003c\/h3\u003e\n\u003cp\u003eLubriTec helps channel oil across the chain and bar contact surfaces to lower friction and heat buildup. The blued finish offers corrosion resistance so cutters retain their edge longer in wet or humid conditions. Together these features reduce downtime from sharpening and slow wear on both chain and bar.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved oil distribution for less friction\u003c\/li\u003e\n  \u003cli\u003eReduced heat and wear during prolonged cutting\u003c\/li\u003e\n  \u003cli\u003eBlued cutter finish prevents surface corrosion\u003c\/li\u003e\n  \u003cli\u003eFewer replacements and less frequent sharpening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this chain is for: Professional and serious weekend users with mid- to large-frame chainsaws who need a reliable 24\" replacement chain. It’s a good choice if you value aggressive cutting performance, clearer sharpening cues, and components engineered to resist corrosion and reduce vibration during heavy use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain compatible with my 24\" bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is designed for a 24\" guide bar with 3\/8\" pitch, .050\" gauge and uses 84 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know when to sharpen the chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen when cutting resistance increases or chips turn into fine sawdust; use the chain's filing indicators for correct angles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199588782264,"sku":"B07H9RF98B","price":72.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-packaging_fb4388f8-021d-4af0-a838-026d000c87e2.jpg?v=1790596720"},{"product_id":"oregon-advancecut-chainsaw-chain-3-8-pitch-050-gauge-24-bar-81-links-lubritec-oil-chrome-durability","title":"Oregon AdvanceCut Chainsaw Chain 3\/8\" Pitch .050 Gauge — 24\" Bar, 81 Links, LubriTec Oil \u0026 Chrome Durability","description":"\u003cp\u003e\u003cstrong\u003eOregon AdvanceCut D81 is a 24-inch replacement chainsaw chain with 3\/8\" pitch, .050\" gauge and 81 drive links built for durable, reliable cutting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Oregon chainsaw chain is engineered to fit many 24\" guide bars and common mid- to large-frame chainsaws (50–100 cc). It combines hardened rivets, a chrome outer layer, and full- or semi-chisel cutter geometry to resist wear, reduce maintenance, and deliver consistent cutting speed. The chain includes Oregon's LubriTec automatic oiling design to help keep the bar and links lubricated for longer life and smoother operation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat specifications determine if this chain fits my saw?\u003c\/h3\u003e\n\u003cp\u003eMatch three key specs to ensure proper fit: pitch, gauge, and number of drive links. These are stamped on the drive link of your existing chain or listed in your saw's owner manual. Using the wrong combination can cause poor fit or unsafe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePitch: 3\/8\" measured between three rivets divided by two.\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" (1.3 mm) thickness of the drive link that fits in the bar groove.\u003c\/li\u003e\n  \u003cli\u003eDrive links: 81 links designed for 24\" bar length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Oregon D81 chain resist wear and reduce maintenance?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from a layered approach: a chrome outer finish, heat-treated cutters, and reinforced rivets reduce abrasion and stretching. Those features help the chain stay sharp longer and cut consistently without frequent tension adjustments or premature replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome-plated exterior minimizes surface wear from dirt and sap.\u003c\/li\u003e\n  \u003cli\u003eHardened rivets resist elongation and loosening under load.\u003c\/li\u003e\n  \u003cli\u003eSemi\/full-chisel cutters maintain cutting speed with reduced clogging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and safety features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe chain meets ANSI kickback performance requirements and is designed for lower vibration and reduced kickback compared with aggressive professional chains. It performs well for general cutting tasks like limbing, cutting firewood, and storm cleanup without sacrificing speed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eANSI B175.1-2012 kickback performance compliance for consumer use.\u003c\/li\u003e\n  \u003cli\u003eLow-vibration profile for more comfortable operation.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Echo, Husqvarna, and Stihl replacement part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does LubriTec oiling extend chain and bar life?\u003c\/h3\u003e\n\u003cp\u003eOregon's LubriTec design helps deliver oil where it's needed most across the bar and chain, reducing friction and heat. Better lubrication lowers wear on both cutting edges and the guide bar groove, which translates into longer service intervals and fewer adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic oiling reduces manual lubrication tasks.\u003c\/li\u003e\n  \u003cli\u003eImproved oil distribution decreases friction and heat buildup.\u003c\/li\u003e\n  \u003cli\u003eLess wear on guide bar and drive links extends component life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Oregon 24\" AdvanceCut D81 chain is aimed at homeowners, landscapers, and light-to-moderate professional users running 50–100 cc saws that require 3\/8\" pitch and .050\" gauge chains. It's ideal for anyone who wants a durable, low-maintenance replacement that meets safety standards and performs reliably across general cutting jobs, from routine pruning to cutting firewood. Always check your chain's stamped dimensions or owner manual before purchasing and follow manufacturer guidelines for installation, tensioning, and safe operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 24-inch chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your saw requires 3\/8\" pitch, .050\" gauge and 81 drive links, this Oregon 24\" D81 chain will fit. Verify the numbers stamped on your old drive link or your owner’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain suitable for professional use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It's built for homeowners and landscaping pros using 50–100 cc saws. It offers durable components and ANSI kickback compliance but choose specialty pro chains for continuous heavy-duty work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Oregon","offers":[{"title":"Default Title","offer_id":54199600152760,"sku":"B00S04RQ6O","price":73.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/oregon-chain-front-packaging_519fda1f-e240-4ffd-98ca-e92cf33c2858.jpg?v=1790596824"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/oregon-compact-bench-grinder-front-view.jpg?v=1790679781","url":"https:\/\/canadianlawn.ca\/collections\/oregon.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}