{"title":"ILONPA","description":"\u003cp\u003eBrowse 41 ILONPA products at Canadian Lawn, including lawn mower \u0026amp; tractor belts, lawn mower blades and mower pulleys \u0026amp; idlers. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"ilonpa-flat-idler-pulley-179114-1-pack-direct-fit-for-husqvarna-poulan-smooth-bearing","title":"ILONPA Flat Idler Pulley 179114 1-Pack — Direct-Fit for Husqvarna\/Poulan, Smooth Bearing","description":"\u003cp\u003e\u003cstrong\u003eILONPA 179114 is a direct-fit flat idler pulley designed to replace worn OEM pulleys on select Husqvarna, Poulan, AYP and Craftsman lawn tractors and riding mowers, restoring smooth belt tracking and reliable power transfer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower's belt is slipping, squealing, or tracking poorly, the idler pulley is often the culprit. The ILONPA 179114 (also listed as 532179114 \/ 5321791-14) is manufactured to match the original pulley dimensions and mounting for a wide range of Husqvarna and Poulan models, so you can get back to consistent cutting performance without modifying the deck or pulley bracket.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pulley improve my mower's belt performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or damaged idler pulley reduces belt slippage and vibration, which protects the belt and other drive components from premature wear. The ILONPA pulley restores the correct belt path and tension, helping blades maintain steady rpm for cleaner cuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for OEM part numbers 179114 and 532179114.\u003c\/li\u003e\n  \u003cli\u003eSmooth bearing action reduces noise and vibration.\u003c\/li\u003e\n  \u003cli\u003eDurable materials resist deformation under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower models does this pulley fit?\u003c\/h3\u003e\n\u003cp\u003eThis pulley fits many Husqvarna, Poulan, AYP and Craftsman lawn tractors and riding mowers, covering several CT, LT, LTH and Poulan model families. Check your mower's parts list or compare the OEM number to ensure compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHusqvarna examples: CT131, CT141, CT151, LT131, LT135, LT141 and many CTH\/LTH\/LT series models.\u003c\/li\u003e\n  \u003cli\u003ePoulan examples: BB185H42, PK20H42, PXT16542 and other common deck models.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with AYP and Craftsman machines using part 532179114.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires removing the mower deck or accessing the idler arm depending on your model. The ILONPA pulley is designed for a bolt-on swap with the same mounting pattern as the OEM unit, keeping the task straightforward for homeowners or technicians.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwap requires basic hand tools: socket set, wrenches, and possibly a jack or deck removal tool.\u003c\/li\u003e\n  \u003cli\u003eInspect belt for wear and replace if cracked, frayed, or glazed.\u003c\/li\u003e\n  \u003cli\u003eApply light anti-seize on mounting fastener if appropriate, then torque to mower specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement pulley?\u003c\/h3\u003e\n\u003cp\u003eILONPA engineers replacements for longevity under typical mowing loads. The pulley uses a robust bearing and a rigid hub to resist wobble and edge wear, helping maintain consistent performance season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision bearing for reduced friction and longer life.\u003c\/li\u003e\n  \u003cli\u003eStiff construction prevents belt misalignment under load.\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OEM dimensions for reliable fit and function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this part is for: Homeowners, groundskeepers and small-fleet maintenance techs who own Husqvarna, Poulan, AYP or Craftsman riding mowers and need a dependable, direct-fit idler pulley to restore belt tension and blade performance. If you identify part number 179114 \/ 532179114 on your mower or experience belt noise, slipping or poor tracking, this ILONPA replacement is a practical, cost-effective repair option to get your mower back to cutting efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pulley the exact replacement for part 532179114?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ILONPA 179114 is a direct-fit replacement for OEM 532179114\/5321791-14 used on listed mower models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace the belt when installing this pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not always, but inspect the belt. Replace if cracked, glazed, or frayed to ensure optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54192700981432,"sku":"B0BL38RTFK","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-flat-idler-pulley-front-view.jpg?v=1790548568"},{"product_id":"ilonpa-flat-idler-pulley-for-toro-timecutter-106-2176-1-pack-oem-fit-durable-replacement","title":"ILONPA Flat Idler Pulley for Toro TimeCutter 106-2176 (1 Pack) — OEM Fit, Durable Replacement","description":"\u003cp\u003e\u003cstrong\u003eILONPA Flat Idler Pulley (1 pack) is a direct-fit replacement pulley designed to restore smooth belt routing and reliable blade drive on compatible Toro TimeCutter mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Toro TimeCutter is showing signs of belt slippage, squealing, or reduced cutting performance, a worn idler pulley is a common culprit. This ILONPA pulley replaces Toro part 106-2176 (also fits Stens 280-716) and was manufactured to match the OEM fitments for many TimeCutter models so you can swap it in without extensive modification. It’s made for durability and consistent rotation to help maintain proper belt tension and efficient power transfer from the engine to the blades.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Toro models and serial numbers does this pulley fit?\u003c\/h3\u003e\n\u003cp\u003eThis ILONPA pulley is specified to fit a broad range of Toro TimeCutter models and serial number ranges. Always check your mower’s model and serial tag before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTimeCutter ZS series including 3200 and 4200 variants (specified SN ranges listed by Toro).\u003c\/li\u003e\n  \u003cli\u003eTimeCutter SS and SW models such as SS 3200\/3216\/4200\/4216 and SW 4200\/5000 within listed SN windows.\u003c\/li\u003e\n  \u003cli\u003eEarly Z series models (Z 14-38Z, Z 16-42Z, Z 17-42Z, Z 18-44Z) covered across indicated SN ranges.\u003c\/li\u003e\n  \u003cli\u003eCross-references: matches Toro part 106-2176 and Stens 280-716 for straightforward replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does swapping to this replacement pulley improve mower performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or noisy idler pulley restores stable belt alignment and appropriate tension, which helps the cutter deck operate more efficiently. That reduces belt wear, prevents slipping under load, and helps blades maintain consistent speed during cutting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother belt tracking reduces heat and friction on belt surfaces.\u003c\/li\u003e\n  \u003cli\u003eConsistent pulley rotation stabilizes blade RPM for a more even cut.\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists premature wear in residential and light commercial use.\u003c\/li\u003e\n  \u003cli\u003eExact-fit design minimizes installation adjustments and downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic mower deck maintenance: remove deck covers or belts as needed, replace the old pulley, and reassemble using factory torque specs. No special tools are required beyond standard sockets and wrenches, though a service manual or OEM schematic speeds identification of the correct mounting hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: 15–45 minutes depending on access to the pulley.\u003c\/li\u003e\n  \u003cli\u003eInspect belt condition when replacing the pulley; replace belt if glazed or cracked.\u003c\/li\u003e\n  \u003cli\u003eKeep fasteners tightened to Toro recommended torque to prevent loosening in service.\u003c\/li\u003e\n  \u003cli\u003ePeriodic deck cleaning and belt checks prolong pulley life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product specifications and quality features?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA pulley is produced to match the form and function of the OEM part number, providing an affordable, reliable option for repairs. It emphasizes dimensional accuracy and bearing performance so the deck belt system runs quietly and consistently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Toro part 106-2176 and Stens 280-716 for direct compatibility.\u003c\/li\u003e\n  \u003cli\u003eDesigned for use on multiple TimeCutter models across specified serial ranges.\u003c\/li\u003e\n  \u003cli\u003eDurable materials and bearing selection for longer service life.\u003c\/li\u003e\n  \u003cli\u003eSold as a single pulley (1 pack) — include hardware review before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a compatible Toro TimeCutter mower and are experiencing belt noise, slipping, or uneven cutting, this ILONPA Flat Idler Pulley is aimed at DIY owners, lawn care professionals, and service shops that need an accurate, cost-effective replacement for the OEM 106-2176 pulley. It’s especially useful when you want a direct-fit part to minimize repair time and restore dependable deck performance without sourcing an expensive original-brand unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pulley replace Toro 106-2176?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the ILONPA flat idler pulley is a direct replacement for Toro part 106-2176 and cross-references Stens 280-716.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself on a TimeCutter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most DIYers can; basic hand tools and 15–45 minutes are typically enough, but check your mower’s service manual for steps and torque specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54192759734456,"sku":"B0BL7JVND7","price":39.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-flat-idler-pulley-front-view_ddd7c1f1-69cd-473b-9392-6dc2eade0362.jpg?v=1790549904"},{"product_id":"ilonpa-1-2-x-90-deck-drive-belt-for-lawn-tractors-gray-aramid-reinforced-replacement","title":"ILONPA 1\/2\" x 90\" Deck Drive Belt for Lawn Tractors — Gray, Aramid Reinforced Replacement","description":"\u003cp\u003e\u003cstrong\u003eILONPA 1\/2\" x 90\" deck drive belt is a heavy-duty replacement belt made with aramid cord for reliable power transfer on compatible lawn tractors and riding mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement belt fits many popular mower makes and models — including Husqvarna, Craftsman, MTD, Toro, AYP, Ariens and others — and corresponds to a wide list of OEM part numbers (such as 532125907, 125907X, 112-5834, 21546076). It has a 1\/2\" width and 90\" measured length, is gray in color, and uses aramid reinforcement to improve tensile strength and resistance to stretching. Before ordering, confirm the part number printed on your old belt or the model number under your seat to ensure exact compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower makes and part numbers does this belt replace?\u003c\/h3\u003e\n\u003cp\u003eThis belt serves as a cross-reference replacement for many OEM part numbers across multiple brands. It covers Husqvarna\/Craftsman\/ Poulan part numbers, MTD designations, Toro references, and specific Ariens and John Deere equivalents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon Husqvarna\/Craftsman: 532125907, 125907X, 193214\u003c\/li\u003e\n  \u003cli\u003eMTD\/Toro\/AYP: 754-04122, 954-04122, 112-5834, 105732X\u003c\/li\u003e\n  \u003cli\u003eOther fits: Ariens 21546076, John Deere M79204\/M82718, Gravely 038745\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this 1\/2\" x 90\" belt will fit my mower?\u003c\/h3\u003e\n\u003cp\u003eVerify fitment by checking the part number stamped on your existing belt or the manufacturer’s part reference in your owner's manual. If you can't find the part number, measure your belt’s width and outside circumference; this product is 1\/2\" wide and 90\" long.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck seat or deck area for the model number and cross-reference it with listed compatible models.\u003c\/li\u003e\n  \u003cli\u003eMeasure original belt width (should be 1\/2\") and belt outside length (about 90\").\u003c\/li\u003e\n  \u003cli\u003eCompare OEM numbers from the product list before purchase to avoid returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build and performance features of this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA belt uses aramid cord reinforcement to provide high tensile strength and reduced stretch over time, keeping deck pulleys driven accurately. Its gray compound balances flexibility for routing with resistance to wear from heat and abrasive contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: aramid cord for durability and consistent tension.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 1\/2\" width, 90\" length, gray finish for easy identification.\u003c\/li\u003e\n  \u003cli\u003eApplication: engineered for deck-drive and transmission routing on specified mowers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I watch for during replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing a deck belt is a routine maintenance job for most homeowners with basic hand tools. Always remove the spark plug wire and follow manufacturer safety steps, relieve belt tension, route the new belt around idlers and pulleys as shown in your mower diagram, and check engagement before first use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafety first: disconnect spark plug and engage parking brake.\u003c\/li\u003e\n  \u003cli\u003eFollow the mower’s belt routing diagram to avoid misrouting and premature wear.\u003c\/li\u003e\n  \u003cli\u003eTension and alignment: ensure pulleys and idlers are free of debris and bearings spin smoothly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 1\/2\" x 90\" replacement belt is aimed at homeowners, landscapers, and repair shops needing a dependable deck-drive belt for mid-size and full-size riding mowers from Husqvarna, Craftsman, MTD, Toro, Ariens and similar brands. Choose this belt if your mower lists one of the compatible OEM numbers or if you measured an existing belt at 1\/2\" by 90\" and require a durable, aramid-reinforced replacement for consistent deck performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt exactly 1\/2\" by 90\"?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the ILONPA replacement belt measures 1\/2\" wide with a 90\" outside length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace part number 532125907?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This belt is listed as a replacement for OEM 532125907 and many equivalent part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54193116512440,"sku":"B07TZHYFBP","price":52.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-deck-belt.jpg?v=1790558914"},{"product_id":"ilonpa-95-x-1-2-deck-belt-for-42-lawn-mowers-gray-aramid-reinforced-replacement","title":"ILONPA 95\" x 1\/2\" Deck Belt for 42\" Lawn Mowers — Gray, Aramid-Reinforced Replacement","description":"\u003cp\u003e\u003cstrong\u003eILONPA 95\" x 1\/2\" deck belt is a direct replacement drive belt engineered to restore cutting performance on many 42\" lawn mower decks from Craftsman, AYP, Ariens and Husqvarna.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower deck is slipping, dragging or producing uneven blade speed, the correct replacement belt is often the simplest fix. This 95\" long by 1\/2\" wide gray deck belt fits numerous OEM part numbers from Craftsman, AYP, Ariens and Husqvarna models and is built with aramid cord reinforcement for improved strength and wear resistance. The belt is intended for standard flat-deck routing on 42\" (and some 38\"\/46\") lawn tractor decks and is supplied to match the common replacement numbers listed by several manufacturers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers will this belt replace?\u003c\/h3\u003e\n\n\u003cp\u003eThis belt replaces a broad list of OEM references used across Craftsman, AYP, Ariens and Husqvarna decks. Check your existing part number and deck size before ordering to confirm fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon AYP\/Craftsman references: 144959, 144959D, 532138255, 130801, 160855 and related 532- numbers.\u003c\/li\u003e\n  \u003cli\u003eAriens part numbers covered: 21547026, 21547027, 21547082, 21547188.\u003c\/li\u003e\n  \u003cli\u003eHusqvarna and Sears variations included: 531300766, 532144959, 577203116 and more.\u003c\/li\u003e\n  \u003cli\u003eFits many Craftsman tractors: LT1000, LT2000, LT3000, DLT3000, DYT4000 series and other 42\" decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the belt constructed and why does that matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe ILONPA belt uses aramid cord reinforcement and a durable rubber compound to resist stretching and abrasion. That combination keeps belt tension stable and reduces the chance of glazing or fraying under typical mowing loads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAramid cord offers high tensile strength and fatigue resistance for longer life.\u003c\/li\u003e\n  \u003cli\u003ePrecision width (1\/2\") and length (95\") match OEM routing and pulley fit.\u003c\/li\u003e\n  \u003cli\u003eGray compound balances grip and wear for consistent blade speed.\u003c\/li\u003e\n  \u003cli\u003eManufactured to tolerate deck heat and typical lawn debris exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are signs you should replace your mower deck belt?\u003c\/h3\u003e\n\n\u003cp\u003eReplace the belt when you notice slipping, heavy squeal, uneven blade rotation or visible cracking and fraying. Replacing a worn belt prevents pulley damage and helps maintain an even, safe cut.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSlipping under load or when engaging the deck.\u003c\/li\u003e\n  \u003cli\u003eVisible cracking, frayed cord edges, or glazing on the exterior.\u003c\/li\u003e\n  \u003cli\u003eLoss of cutting power or slow blade speed despite proper engine RPM.\u003c\/li\u003e\n  \u003cli\u003eObvious belt stretch making it loose on idlers and pulleys.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I check fit before buying and install after purchase?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm fit by matching your existing belt's length and width or by cross-referencing the OEM numbers listed. Installation is typically straightforward with deck access, but follow your mower's manual for routing and tensioning steps to avoid misrouting or damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure your current belt: 95\" length and 1\/2\" width required for this part.\u003c\/li\u003e\n  \u003cli\u003eCompare your mower's OEM numbers to those in the product listing.\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer-provided diagrams to route over spindles and idlers correctly.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, a technician or small engine shop can install and tension the belt properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this belt is for: This ILONPA deck belt is intended for homeowners and maintenance technicians who need a reliable, OEM-compatible replacement for 42\" lawn mower decks (and some 38\"\/46\" applications) from Craftsman, AYP, Ariens and Husqvarna. Choose this belt when your mower shows slipping, noise, or visible belt wear and you want a durable aramid-reinforced part that matches the specified 95\" x 1\/2\" dimensions and listed replacement numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit my Craftsman LT2000 42\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your original belt measures 95\" x 1\/2\" or matches the listed OEM numbers; verify your deck part number before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not always; many homeowners can replace it using deck diagrams, but consult a technician if unsure about routing or tensioning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54193164714168,"sku":"B07V3LYP4C","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-95x12-deck-belt.jpg?v=1790559330"},{"product_id":"ilonpa-flat-idler-pulley-for-husqvarna-lt-lth-riding-mowers-131494-replacement-1-pack-restore-belt-alignment","title":"ILONPA Flat Idler Pulley for Husqvarna LT\/LTH Riding Mowers - 131494 Replacement, 1-Pack, Restore Belt Alignment","description":"\u003cp\u003e\u003cstrong\u003eILONPA 131494 Flat idler pulley is a direct-fit replacement pulley for many Husqvarna, Poulan and Craftsman lawn mower models, restoring belt alignment and reliable power transfer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-pack idler pulley from ILONPA is engineered to replace worn or damaged flat idler pulleys specified by part numbers such as 131494, 532131494, 173437, 532173437, 173438, 532173438, 165888 and 532165888. It’s made for homeowners and service technicians who need a dependable, drop-in spare that fits a broad range of riding mowers and garden tractors. The pulley helps maintain correct belt tension and smooth rotation, which keeps cutting decks operating efficiently after a service or repair.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models does this pulley fit?\u003c\/h3\u003e\n\u003cp\u003eThis pulley is compatible with numerous Husqvarna, Poulan and Craftsman models across the LT, LTH, YTH, PB and PO series. Check your mower’s parts list or the old pulley part number against the list below to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHusqvarna models: LT16542, LT18452, LTH1342, LTH1542, LTH1742, LTH18542, LTH2042, and related YTH series.\u003c\/li\u003e\n  \u003cli\u003eYTH variants: YTH130, YTH1342XP, YTH1542, YTH1842, YTH1848, YTH18542, YTH2042, YTH2048, YTH2242, plus many XP editions.\u003c\/li\u003e\n  \u003cli\u003ePoulan\/Craftsman coverage: PB18542LT, PB1842LT, PO14542 series, PR17542 series and multiple other Poulan part families.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this idler pulley improve mower performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn pulley restores correct belt tracking and tension, reducing slippage and uneven blade engagement. A functioning pulley helps the deck blades receive consistent power so cutting performance is steadier and the drivetrain experiences less wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents belt wandering and premature belt wear by keeping proper alignment.\u003c\/li\u003e\n  \u003cli\u003eReduces vibration and noise from a failing idler assembly.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain even blade speed for a cleaner, more consistent cut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect before replacing the pulley?\u003c\/h3\u003e\n\u003cp\u003eBefore you install the new pulley, examine the belt, bracket and mounting hardware for damage or excessive play. Replacing the pulley while other worn components remain can limit the improvement and shorten the life of the new part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck belt for cracks, glazing or frayed edges and replace if needed.\u003c\/li\u003e\n  \u003cli\u003eInspect mounting bolts, bushings and the idler arm for wear or bending.\u003c\/li\u003e\n  \u003cli\u003eEnsure spindle and mating surfaces are clean and free of debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this pulley easy to install for a home mechanic?\u003c\/h3\u003e\n\u003cp\u003eYes — the part is designed as a straightforward replacement for compatible models and usually requires only basic hand tools. Follow your mower manufacturer’s service instructions for safe removal and torque specifications to secure the pulley properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical installation needs common sockets, wrenches and possible a torque wrench.\u003c\/li\u003e\n  \u003cli\u003eRemoval often involves loosening belt tension and unbolting the idler bracket.\u003c\/li\u003e\n  \u003cli\u003eRefer to the mower manual for correct reassembly steps and safety precautions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 131494 flat idler pulley suits homeowners, landscapers and small repair shops that service Husqvarna, Poulan and Craftsman riding mowers. It’s ideal for anyone restoring deck performance after belt or pulley wear, or keeping a spare on hand for routine maintenance. Purchase when you need a reliable, OEM-style replacement that fits a wide range of LTH, LT, YTH and Poulan models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this ILONPA pulley match part number 131494?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it replaces 131494 and equivalent numbers (532131494, 173437, 532173437, 173438, 532173438, 165888, 532165888).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; common sockets and wrenches suffice, plus a torque wrench if you want exact bolt tightening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54193204265144,"sku":"B0BL3DFGBM","price":45.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-flat-idler-pulley-front-view_45010cab-dcb8-454f-b916-931f8e4c14e2.jpg?v=1790559682"},{"product_id":"ilonpa-flat-idler-pulley-for-husqvarna-poulan-craftsman-1-pack-fits-42-46-48-54-decks-oem-replacements","title":"ILONPA Flat Idler Pulley for Husqvarna Poulan Craftsman — 1-Pack Fits 42\/46\/48\/54\" Decks, OEM Replacements","description":"\u003cp\u003e\u003cstrong\u003eILONPA Flat Idler Pulley replaces Husqvarna\/Poulan\/Craftsman parts 196106, 197379, 532196106 and 532197379 to restore belt routing and smooth deck operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower’s deck belts are slipping, squealing, or showing excess wear, a worn idler pulley is often the culprit. This ILONPA replacement pulley is manufactured to match the fit and function of the original parts used on many Husqvarna, Poulan and Craftsman riding mowers with 42\", 46\", 48\" and 54\" decks. It is offered as a single-pack direct replacement to help return proper tension and alignment to the mower’s deck drive system.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models does this pulley fit?\u003c\/h3\u003e\n\u003cp\u003eThe pulley fits a wide range of popular models from Husqvarna, Poulan Pro and Craftsman. Compatibility includes garden tractors, zero-turns and lawn tractors that list the original part numbers 196106, 197379, 532196106 or 532197379.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHusqvarna: GTH 2654T, LSZ 4622, RZ 4219, RZ 5422\/5424\/5426, YTH series and many GTH\/TS\/YT models.\u003c\/li\u003e\n  \u003cli\u003ePoulan Pro: PB\/ PBGT series such as PB22H54YT, PB24TH54YT, PBGT26H54 and related models.\u003c\/li\u003e\n  \u003cli\u003eCraftsman: LTH, MZ, RZ, ST and TS series across several deck widths including MZ48 and MZ54.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 196106, 197379, 532196106, 532197379 for direct swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will replacing the idler pulley affect deck performance?\u003c\/h3\u003e\n\u003cp\u003eInstalling a new idler pulley restores consistent belt tension and alignment so blades spin smoothly and belt life improves. That helps reduce belt noise, slippage and uneven cutting caused by poor belt tracking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces belt squeal and slipping under load.\u003c\/li\u003e\n  \u003cli\u003eImproves belt tracking to prevent edge wear and fraying.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent blade speed for even cutting.\u003c\/li\u003e\n  \u003cli\u003eSimple swap for models using the listed OEM part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering and installing?\u003c\/h3\u003e\n\u003cp\u003eConfirm the OEM part number on your mower or compare the pulley size and mounting arrangement to your existing unit. Also inspect belt condition, deck spindle hardware and any mounting brackets that might be corroded or damaged.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch one of the OEM numbers: 196106 \/ 197379 \/ 532196106 \/ 532197379.\u003c\/li\u003e\n  \u003cli\u003eVerify deck width (42\", 46\", 48\", 54\") and mower model compatibility lists.\u003c\/li\u003e\n  \u003cli\u003eInspect belt, spindle, and bracket condition for related wear.\u003c\/li\u003e\n  \u003cli\u003eKeep basic hand tools and safety gear ready for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what maintenance helps prolong pulley life?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for anyone comfortable with basic mower maintenance—remove the belt, unbolt the worn pulley and swap in the replacement. Regularly cleaning debris from the deck, checking belt tension and inspecting pulley bearings will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install: belt removal, unbolt old pulley, install new pulley, re-route belt.\u003c\/li\u003e\n  \u003cli\u003eInspect and replace belts if cracked, glazed, or frayed.\u003c\/li\u003e\n  \u003cli\u003eKeep deck underside free of grass build-up to reduce bearing load.\u003c\/li\u003e\n  \u003cli\u003ePeriodically check pulley for noise or looseness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA flat idler pulley is designed for homeowners, landscapers and service technicians who need an affordable, OEM-compatible replacement for Husqvarna, Poulan Pro and Craftsman riding mower decks. It’s intended for machines that specify the listed part numbers and deck widths between 42\" and 54\", and for anyone looking to restore reliable belt tension and quieter deck operation without sourcing original OEM stock.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pulley replace part number 197379?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ILONPA pulley is designed to replace OEM part 197379 and equivalent numbers including 196106, 532196106 and 532197379.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on a 54-inch Craftsman deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits many Craftsman decks up to 54\" listed in the compatibility list; verify your exact model and OEM part number first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54193310630072,"sku":"B0BL3G3J83","price":48.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-flat-idler-pulley-front-view_4542dd98-f1d1-48ad-9478-f734745bbcd4.jpg?v=1790561029"},{"product_id":"ilonpa-5-8-x-41-upper-drive-belt-gray-aramid-cord-replacement-for-cub-cadet-troy-bilt","title":"ILONPA 5\/8 x 41 Upper Drive Belt — Gray Aramid-Cord Replacement for Cub Cadet \u0026 Troy-Bilt","description":"\u003cp\u003e\u003cstrong\u003eILONPA 954-04208A is a 5\/8\" x 41\" upper drive replacement belt built with aramid cord for higher tensile strength and compatibility with a wide range of Cub Cadet, Troy-Bilt, MTD and Craftsman lawn tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or broken upper drive belt sidelines your mower, you need a durable, correct-size replacement that matches factory part numbers and fits the deck and pulley layout of your machine. This ILONPA belt measures 5\/8\" wide and 41\" long, uses aramid reinforcement to resist stretching and fraying, and is offered as a direct-fit alternative for many common model\/service numbers across Cub Cadet, MTD, Troy-Bilt Bronco lines and several Craftsman models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt is intended as a replacement for specific part numbers and model lines rather than a universal fit. Check your mower's parts list or current belt stamping to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM references including 954-04208A, 954-04208, 754-04208 and variants.\u003c\/li\u003e\n  \u003cli\u003eCommon fits: Cub Cadet LTX1040 series and many model codes listed in manufacturer documentation.\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt Bronco and related 42\" and 46\" deck variants covered by listed part codes.\u003c\/li\u003e\n  \u003cli\u003eSelected Craftsman riding mower series and LT models where those part numbers are referenced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aramid cord construction help performance?\u003c\/h3\u003e\n\u003cp\u003eAramid fiber reinforcement resists elongation and maintains belt tension under load, which improves engagement with pulleys and reduces the risk of premature failure. This reinforcement is common in higher-quality aftermarket drive belts for lawn and garden equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh tensile strength reduces stretching over time for steadier deck action.\u003c\/li\u003e\n  \u003cli\u003eImproved tear and wear resistance versus non-reinforced belts.\u003c\/li\u003e\n  \u003cli\u003eStable performance across normal operating temperatures and speeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and color details should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe belt is specified at 5\/8\" (0.625\") width with a 41\" overall circumference\/length—measure your existing belt or consult the owner's manual to verify size. The belt arrives in a gray compound typical for aftermarket reinforced drive belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth: 5\/8\" for proper pulley seating on compatible systems.\u003c\/li\u003e\n  \u003cli\u003eLength: 41\" so it matches original equipment specifications listed.\u003c\/li\u003e\n  \u003cli\u003eColor: gray, useful for quick visual confirmation against OEM belts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm I’m ordering the correct replacement belt?\u003c\/h3\u003e\n\u003cp\u003eConfirm fitment by matching the OEM or stamped part number from your existing belt or parts diagram. If your mower’s parts list includes any of the replacement references supplied with this ILONPA belt, it’s likely the correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the numbers printed on your old belt to the listed replacements (e.g., 954-04208A, 754-04208A).\u003c\/li\u003e\n  \u003cli\u003eMeasure width and loop circumference to ensure 5\/8\" x 41\" match.\u003c\/li\u003e\n  \u003cli\u003eCross-check your mower model and deck size (e.g., Bronco 42\" \/ 46\" or Cub Cadet LTX1040 variants).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA upper drive belt is suited for homeowners and small property caretakers who need a dependable replacement for specific Cub Cadet, MTD, Troy-Bilt Bronco and Craftsman riding mowers and decks. Choose this belt if you require a direct-fit alternative to the listed OEM numbers and want the added durability of aramid cord reinforcement to extend service life between replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this the same as part number 954-04208A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ILONPA belt replaces OEM numbers including 954-04208A, 954-04208, 754-04208 and related variants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit a Troy-Bilt Bronco 42\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Bronco 42\" deck part codes listed; confirm your mower’s exact part code against the provided references first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54193314201784,"sku":"B07V7W878W","price":48.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-upper-drive-belt-front-view.jpg?v=1790561177"},{"product_id":"ilonpa-idler-pulley-532196104-replacement-for-husqvarna-poulan-7-16-id-5-3-8-od-restores-belt-tension-smooth-rotation-1-pac","title":"ILONPA Idler Pulley 532196104 Replacement for Husqvarna\/Poulan 7\/16\" ID 5-3\/8\" OD — Restores Belt Tension \u0026 Smooth Rotation (1 Pac","description":"\u003cstrong\u003eHigh-strength ILONPA idler pulley 532196104 replaces worn Husqvarna\/Poulan idler pulleys to restore belt tracking and cutting performance.\u003c\/strong\u003e\n\n\u003cp\u003eIf your lawn tractor is slipping, humming, or losing blade power, the idler pulley can be the root cause. This ILONPA 532196104 replacement pulley is manufactured to the same key dimensions as the OEM parts (7\/16\" inner diameter, 5 3\/8\" outer diameter, 1 5\/8\" height) so it mates cleanly with models from Husqvarna, Poulan and related brands. Built from durable materials and finished for smooth rotation, the pulley helps re-establish proper belt routing and tension so your mower runs more efficiently.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pulley affect my mower's cutting performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn idler pulley reduces belt slippage and restores consistent blade rotation speed. That improves cutting quality and reduces vibration that can stress other components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers 196104, 532196104, 197380, 532197380\u003c\/li\u003e\n  \u003cli\u003eRestores proper belt tension and alignment\u003c\/li\u003e\n  \u003cli\u003eSmoother rotation decreases wear on belts and spindles\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent blade speed for cleaner cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mower models is this ILONPA idler pulley compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe pulley is sized to fit a wide range of Husqvarna and Poulan walk-behind and zero-turn models. Check the listed fitment against your tractor’s parts number to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHusqvarna models: TS342, TS343, TS348, TS352, YT42DXLS, YT42XLS and many GT\/GTH\/LGT and RZ series\u003c\/li\u003e\n  \u003cli\u003ePoulan models: PB23H48YT, PB26H54YT, PBGT26H54 and similar\u003c\/li\u003e\n  \u003cli\u003eAlso fits numerous model variants noted in OEM fitment lists\u003c\/li\u003e\n  \u003cli\u003eCross-references common OEM part numbers for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the pulley dimensions and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe listed inner and outer diameters and the pulley height determine how the belt rides and how pulleys line up on shafts. Using a correctly sized replacement keeps pulleys concentric and prevents premature belt wear or misrouting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 7\/16 inch — fits specified shaft sizes\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 5 3\/8 inches — matches belt wrap and contact area\u003c\/li\u003e\n  \u003cli\u003eHeight: 1 5\/8 inches — ensures proper clearance and alignment\u003c\/li\u003e\n  \u003cli\u003eForm-fit dimensions reduce installation adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this aftermarket idler pulley compared to the original?\u003c\/h3\u003e\n\u003cp\u003eILONPA manufactures this pulley with attention to durable materials and finishing to deliver reliable service life under normal mowing conditions. While longevity depends on use and maintenance, the part is designed to perform like the original equipment it replaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality bearing for smooth, low-friction rotation\u003c\/li\u003e\n  \u003cli\u003eRobust construction minimizes deformation under load\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant surfaces for outdoor durability\u003c\/li\u003e\n  \u003cli\u003eRecommended as a cost-effective OEM alternative for repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA idler pulley is intended for homeowners, grounds crews, and small landscaping businesses who need a reliable aftermarket replacement for specific Husqvarna and Poulan mowers. If your machine exhibits belt slippage, noisy pulleys, or uneven cutting and the OEM part number matches 196104 \/ 532196104 \/ 197380 \/ 532197380, this 1-pack replacement is a direct-fit option to get your deck back to proper operation without a full spindle or deck overhaul.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace my existing Husqvarna pulley with this ILONPA part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your OEM part number matches 196104\/532196104\/197380\/532197380 and shaft dimensions match (7\/16\" ID), this ILONPA pulley is a direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pulley include the bearing or require separate purchase?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This idler pulley is supplied complete with its bearing installed, ready for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54194514952376,"sku":"B0BL34TQ8T","price":54.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-idler-pulley-front-view.jpg?v=1790576694"},{"product_id":"ilonpa-5-8-x-89in-secondary-deck-belt-for-48-mowers-aramid-cord-heavy-duty-gray","title":"ILONPA 5\/8 x 89in Secondary Deck Belt for 48\" Mowers — Aramid Cord, Heavy-Duty Gray","description":"\u003cp\u003e\u003cstrong\u003eILONPA 5\/8\" x 89\" secondary deck belt is a direct-fit replacement belt engineered for 48\" deck riding mowers from Husqvarna, AYP, Craftsman, Cub Cadet, Exmark, Scag and compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty deck belt is built with aramid cord for increased tensile strength and long wear life, sized to match OEM specifications (5\/8\" width, 89\" inside length) and offered in a neutral gray finish. It replaces a broad list of OEM part numbers across brands, making it a practical spare or repair part for common 48\" deck mower models including Husqvarna YTH2448 series, Craftsman GT5000, and many Exmark and Cub Cadet machines.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers does this belt replace?\u003c\/h3\u003e\n\u003cp\u003eThis belt covers many OEM references so you can cross-check fitment with your mower. It’s listed for Husqvarna, AYP, Craftsman, Cub Cadet, Exmark, Scag, Snapper and other brands—use your mower’s deck size and part number compatibility to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHusqvarna\/AYP: 174369, 180808, 531300771, 532174369, 532180808\u003c\/li\u003e\n  \u003cli\u003eCraftsman: 33908; Cub Cadet: 754-3003, 954-3003A\u003c\/li\u003e\n  \u003cli\u003eExmark: 1-303080, 1-303499, 1-543523; Scag: 48089, 480831\u003c\/li\u003e\n  \u003cli\u003eAlso fits Encore\/Worldlawn 483030, Snapper 7076496 series, Yazoo 205-517\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the ILONPA belt and what material is used?\u003c\/h3\u003e\n\u003cp\u003eThe belt uses aramid cord reinforcement for superior tensile strength and resistance to stretching. That construction reduces belt slip and extends service life compared with standard rubber-only belts, helping maintain consistent deck speed and cutting performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid cord core for high tensile strength\u003c\/li\u003e\n  \u003cli\u003eReinforced rubber compound for wear and heat resistance\u003c\/li\u003e\n  \u003cli\u003ePrecise molding to OEM inside length and width dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this 5\/8\" x 89\" belt fits my deck?\u003c\/h3\u003e\n\u003cp\u003eFirst, check your existing belt for stamped or printed part numbers and compare to the replacement list. If numbers aren’t readable, measure belt inside circumference (length) and width, and confirm your deck is a 48\" model that uses a secondary belt layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure inside length: 89 inches (circumference)\u003c\/li\u003e\n  \u003cli\u003eMeasure width across belt cross-section: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003eVerify deck model fitment (e.g., Husqvarna YTH2448, Craftsman GT5000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are common installation tips and maintenance to extend belt life?\u003c\/h3\u003e\n\u003cp\u003eProper routing and tension are key—follow your mower’s deck routing diagram and keep idlers and pulleys free of debris. Inspect pulleys, spindle bearings, and deck edges for wear or sharp metal that can cut the belt, and replace damaged hardware before installing a new belt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoute the belt exactly as the deck diagram specifies\u003c\/li\u003e\n  \u003cli\u003eClean pulleys and remove buildup before installation\u003c\/li\u003e\n  \u003cli\u003eReplace worn idlers or bearings to prevent premature wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers, homeowners, and small-property caretakers who own 48\" deck riding mowers and need a reliable secondary deck belt replacement that matches OEM size and many part numbers. Choose this ILONPA belt if you want a durable, aramid-reinforced option that restores consistent deck operation and reduces downtime for routine mowing tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt the same as OEM part 532180808?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ILONPA belt is a direct replacement for OEM 532180808 and several equivalent numbers for compatible mower models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this belt myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most owners can install it using basic hand tools; follow the deck routing diagram and replace any worn pulleys or idlers for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54194539561144,"sku":"B07V3M2JD7","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-assembled-belt.jpg?v=1790577057"},{"product_id":"ilonpa-1-2-x-89-drive-belt-for-john-deere-mowers-aramid-cord-reinforced-gray","title":"ILONPA 1\/2\" x 89\" Drive Belt for John Deere Mowers — Aramid Cord Reinforced, Gray","description":"\u003cp\u003e\u003cstrong\u003eILONPA 1\/2\" x 89\" aramid drive belt is a durable replacement belt engineered to restore drive power on many John Deere lawn tractors and comparable mower models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty belt is sized at 1\/2\" wide and 89\" long, finished in gray, and reinforced with aramid cord to deliver superior tensile strength and wear resistance compared with standard rubber belts. It replaces a long list of OEM and aftermarket part numbers (including GX20006, UC30568, M110367, 37X88, 710213 and others), making it a practical spare for homeowners and small-fleet shops that service John Deere D, L, LA, E, S, X series machines as well as many MTD, Toro, Murray and Craftsman mowers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models will this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA 1\/2\" x 89\" belt is compatible with a wide range of John Deere models and several brands that share equivalent belt specifications. Check the list below for common model families and cross-referenced replacement numbers to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJohn Deere: D110–D170 series; L105–L130 series; LA110–LA175 series; 105–155 and E110–E180 families.\u003c\/li\u003e\n  \u003cli\u003eAlso fits many S and X series John Deere variants and popular equivalents from MTD, Toro, Murray, Ariens, Scotts, Craftsman, Allis Chalmers and AYP.\u003c\/li\u003e\n  \u003cli\u003eCommon replaced part numbers: GX20006, UC30568, M110367, 37X88, 37X106, 710213, 754-0248, 954-0294 and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does aramid cord construction help performance?\u003c\/h3\u003e\n\u003cp\u003eAramid fibers provide high tensile strength and dimensional stability, which reduces stretch and helps the belt keep tension longer under load. That stability results in more consistent drive performance and extended service life compared with non-reinforced belts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh tensile aramid core minimizes elongation during use.\u003c\/li\u003e\n  \u003cli\u003eImproved resistance to heat and fatigue for longer intervals between replacements.\u003c\/li\u003e\n  \u003cli\u003eGray compound resists cracking and surface wear from pulleys.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat measurements and specs should I verify before buying?\u003c\/h3\u003e\n\u003cp\u003eConfirm belt width, overall length, and whether the machine requires a drive (flat) belt or a V\/serpentine profile. This ILONPA item is a flat drive belt: 1\/2\" wide, 89\" measured along the belt, and colored gray—verify these numbers against your existing belt or owner manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBelt width: 1\/2\" (12.7 mm).\u003c\/li\u003e\n  \u003cli\u003eOverall belt length: 89\" (measured circumference).\u003c\/li\u003e\n  \u003cli\u003eProfile: flat drive belt suitable for the listed mower drive systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the mower manufacturer’s routing diagram—always disconnect the spark plug and lift the mower securely before working under it. Routine inspection for fraying and proper tension will extend belt life and prevent unexpected failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow the deck and transmission belt routing diagram in your manual.\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys for wear and remove debris that can abrade the belt.\u003c\/li\u003e\n  \u003cli\u003eReplace the belt if you see cord exposure, glazing, or significant cracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own or maintain John Deere small tractors or similar riding mowers—and you need a long-lasting, replacement drive belt that matches OEM dimensions—this ILONPA aramid-reinforced 1\/2\" x 89\" belt is designed for you. It’s a practical choice for homeowners who perform seasonal maintenance, lawn-care professionals stocking common spares, and repair shops that require dependable cross-fit belts for multiple model lines. Always verify model compatibility and belt dimensions before purchase to ensure correct fit and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt the exact replacement for GX20006?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this ILONPA 1\/2\" x 89\" belt is sold as a compatible replacement for GX20006 and UC30568.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this belt on non-John Deere mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits many models from MTD, Toro, Murray, Craftsman and others if they require a 1\/2\" x 89\" flat drive belt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54194596905144,"sku":"B07V2GJW31","price":56.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-drive-belt.jpg?v=1790577458"},{"product_id":"ilonpa-lawn-mower-drive-belt-1-2-x-67-replacement-for-cub-cadet-mtd-troy-bilt-ariens-aramid-cord-oem-cross-reference","title":"ILONPA Lawn Mower Drive Belt 1\/2\" x 67\" Replacement for Cub Cadet MTD Troy-Bilt Ariens — Aramid Cord, OEM Cross-Reference","description":"\u003cp\u003e\u003cstrong\u003eThis ILONPA lawn mower drive belt is a 1\/2\" x 67\" replacement made with aramid cord for high tensile strength and is compatible with many Cub Cadet, MTD, Troy-Bilt and Ariens models and part numbers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a deck or drive belt wears out it can stall cutting performance or stop your mower from engaging blades and transmissions. The ILONPA 1\/2\" x 67\" belt is engineered as a direct replacement for numerous OEM numbers, offering a durable option to restore reliable power transfer on a wide range of zero-turn and lawn tractor models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines and part numbers does this belt replace?\u003c\/h3\u003e\n\u003cp\u003eThis replacement belt covers a long list of OEM references and model families from Cub Cadet, MTD, Troy-Bilt and Ariens. It matches legacy part numbers so you can swap it in without modifying pulleys or deck assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 954-04317A, 754-04317, 754-04317A, 954-04317 and related 754-0498 \/ 954-0498 series.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references 754-0355, 954-0355, 754-0204, 954-0204 and Ariens 07211500.\u003c\/li\u003e\n  \u003cli\u003eFits model families: RZT-L\/S series (42–54), Ultima ZT1 series, Z-Force and Mustang XP (various years).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this belt perform compared with the original?\u003c\/h3\u003e\n\u003cp\u003eILONPA builds this belt with aramid cord reinforcement, which boosts tensile strength and resists stretching under load. That construction helps maintain consistent tension and reduces the chance of premature failure under normal mowing conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid cord core for improved strength and longevity.\u003c\/li\u003e\n  \u003cli\u003eCut dimensions 1\/2\" width by 67\" circumference to match OEM sizing for deck applications.\u003c\/li\u003e\n  \u003cli\u003eDesigned for drive\/deck use with abrasion-resistant outer compound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing the replacement belt?\u003c\/h3\u003e\n\u003cp\u003eConfirm belt routing, pulley condition, and belt width\/length against your machine’s original belt. Replacing worn pulleys or deck idlers at the same time prevents rapid wear of the new belt and ensures proper tension and alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify your mower’s OEM part number or compare old belt dimensions: 1\/2\" x 67\".\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and idlers for grooves, rust, or play and replace if needed.\u003c\/li\u003e\n  \u003cli\u003eFollow your mower’s belt routing diagram to avoid misrouting and premature damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this belt easy to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable working under the mower deck or accessing the drive system. Basic tools and the manufacturer routing diagram are usually all that’s needed; periodic visual checks keep the belt performing well.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install requires standard wrenches and possibly a deck lift for clearance.\u003c\/li\u003e\n  \u003cli\u003eKeep belt clean of debris and sharp objects to extend service life.\u003c\/li\u003e\n  \u003cli\u003eCheck tension and alignment after the first mowing and periodically thereafter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: homeowners and small-property caretakers who own compatible Cub Cadet, MTD, Troy-Bilt or Ariens zero-turns and tractors and need a reliable, OEM-matching deck\/drive belt. It’s also useful for lawn-equipment repair shops and DIY mechanics seeking a durable replacement built with aramid reinforcement. If your mower lists any of the referenced part numbers or models and requires a 1\/2\" x 67\" deck belt, this ILONPA unit provides a cost-effective way to restore proper drive performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit my RZT-L50 model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The belt is 1\/2\" x 67\" and lists compatibility with RZT-L50 and many related RZT-L\/S models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the belt made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt features an aramid cord core for high tensile strength and improved durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54194852462776,"sku":"B07FMCCD4C","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-label-view.jpg?v=1790579425"},{"product_id":"ilonpa-lower-drive-belt-90-1-2-x-5-8-aramid-cord-direct-fit-replacement-for-lawn-tractor-transmissions","title":"ILONPA lower drive belt 90-1\/2 x 5\/8 — aramid cord direct-fit replacement for lawn tractor transmissions","description":"\u003cp\u003e\u003cstrong\u003eILONPA's 90-1\/2\" x 5\/8\" lower drive belt is a direct-fit replacement built with aramid cord for reliable transmission performance on compatible lawn tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace a worn lower drive belt quickly and get your mower's transmission back to smooth operation. This ILONPA belt matches common OEM part numbers used across Cub Cadet, Craftsman, Toro, Troy-Bilt, MTD and other brands. Constructed with aramid reinforcement, it resists stretching and delivers consistent tension so your deck and drive systems run more predictably.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers will this belt replace?\u003c\/h3\u003e\n\u003cp\u003eThis belt is designed to substitute numerous factory part numbers for the lower drive system. It fits a wide range of models from multiple OEMs when the required size is 90-1\/2\" long and 5\/8\" wide.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet \u0026amp; Craftsman: LT and LTX series including LT 1040, LTX 1040, LT2000 replacements and many T-series numbers listed.\u003c\/li\u003e\n  \u003cli\u003eToro: compatible with LX 420, LX 423, LX 425, LX 426, LX 460, LX 500 and GT 2100 (part 112-0301).\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt \u0026amp; Bronco: fits a broad set of Bronco, Super Bronco, Horse, Thoroughbred and Big Red Horse model references.\u003c\/li\u003e\n  \u003cli\u003eOther makes: White Outdoor, MTD, Huskee, Murray models where the lower drive belt specification matches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aramid cord construction benefit drive performance?\u003c\/h3\u003e\n\u003cp\u003eAramid fibers add high tensile strength and dimensional stability, reducing stretch and improving belt life under load. That makes this belt better suited for the torque and repeated engagement common in lawn tractor transmissions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh tensile aramid core reduces elongation over time.\u003c\/li\u003e\n  \u003cli\u003eImproved toughness helps withstand transmission shock and heat.\u003c\/li\u003e\n  \u003cli\u003eConsistent cross-section maintains correct pulley engagement and tension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to ensure fitment?\u003c\/h3\u003e\n\u003cp\u003eConfirm the belt's length (90-1\/2\") and width (5\/8\") match your mower's lower drive belt specification. Also compare your original part number to the compatible numbers list to avoid ordering the wrong belt type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure your existing belt if unsure: 90-1\/2\" circumference, 5\/8\" width.\u003c\/li\u003e\n  \u003cli\u003eMatch OEM part numbers such as 954-0467A, 754-0467A, 112-0301, etc.\u003c\/li\u003e\n  \u003cli\u003eEnsure you need a lower drive belt — this product does not replace upper or deck belts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this belt myself and what tools are usually needed?\u003c\/h3\u003e\n\u003cp\u003eMany homeowners with basic mechanical skills can swap the lower drive belt using common hand tools. Installation steps vary by tractor model, but most jobs require releasing deck tension and routing the belt through pulleys and idlers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: socket set, wrenches, screwdrivers and possibly pliers.\u003c\/li\u003e\n  \u003cli\u003eFollow model-specific routing diagrams or service manual instructions.\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and idlers for wear while replacing the belt to prolong lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis ILONPA lower drive belt is engineered for hobbyist and professional users who need a durable, OEM-compatible replacement. It is ideal for owners of Cub Cadet, Toro, Troy-Bilt, Craftsman and other tractors listed above who require the exact 90-1\/2\" x 5\/8\" lower drive size. Do not use this belt as an upper or deck belt; verify part numbers and dimensions before purchase for correct fitment and reliable transmission performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit my Cub Cadet LT 1040?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this 90-1\/2\" x 5\/8\" lower drive belt is listed as compatible with Cub Cadet LT 1040 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt suitable for upper deck replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — ILONPA 954-0467A is specifically a lower drive belt and not intended for upper deck use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54194903974072,"sku":"B07V2GMWT8","price":56.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-lower-drive-belt.jpg?v=1790579901"},{"product_id":"ilonpa-1-2-x-115-5-8-deck-belt-for-42-36-mower-decks-aramid-reinforced-oem-fit","title":"ILONPA 1\/2\" x 115 5\/8\" Deck Belt for 42\" \u0026 36\" Mower Decks - Aramid Reinforced, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eILONPA 1\/2\" x 115 5\/8\" deck belt is a direct-fit replacement belt designed to restore reliable power transfer for 42\" and 36\" lawn mower decks used on John Deere, Scotts, Hustler, FasTrak and Raptor models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower’s cutting deck has a worn, cracked or slipping belt, swapping in a properly sized replacement gets your blades spinning consistently again. This ILONPA belt matches OEM fit and routing for multiple popular residential and commercial garden tractors and zero-turn mowers, built with aramid cord reinforcement for improved tensile strength and longer life than standard rubber-only belts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and deck sizes does this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt covers a range of John Deere and compatible models with 42\" decks as well as select FasTrak and Raptor decks. It lists the equivalent OEM numbers so you can verify compatibility against your machine’s parts diagram before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements for John Deere part M124895 and Hustler part 793828 \/ 793828X.\u003c\/li\u003e\n  \u003cli\u003eFits Scotts S1742, S1642 and Sabre 1542HS\/1542GS\/1642HS\/1742HS\/1742GS with 42\" decks.\u003c\/li\u003e\n  \u003cli\u003eWorks with FasTrak 333559 (36\" deck) and Raptor models 117164\/117164EX\/124379\/124379EX (42\" deck).\u003c\/li\u003e\n  \u003cli\u003eVerify belt width 1\/2\" and length 115 5\/8\" before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the ILONPA replacement belt compared with OEM belts?\u003c\/h3\u003e\n\u003cp\u003eThis replacement belt uses aramid cord reinforcement—an industrial fiber known for high tensile strength—so it resists stretching and handles the loads of PTO-driven mower decks better than unreinforced belts. Properly routed and tensioned, it can deliver consistent service for regular mowing conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid cord core for increased tear and stretch resistance.\u003c\/li\u003e\n  \u003cli\u003eGray compound selected for flexibility across temperature ranges.\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OEM profile for pulley engagement and tracking.\u003c\/li\u003e\n  \u003cli\u003eSuitable for residential and light commercial mowing schedules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this belt?\u003c\/h3\u003e\n\u003cp\u003eConfirm the belt length and width against your mower’s manual or the old belt; also inspect pulleys, idlers, and deck spindles for wear because a new belt won’t last long on damaged hardware. Follow the manufacturer’s routing diagram or take a photo before removal to make reinstallation straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure: 1\/2\" width, 115 5\/8\" outside circumference.\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and idlers for glazing, wobble, or missing bearings.\u003c\/li\u003e\n  \u003cli\u003eCheck deck spindle bolts and blade condition while the deck is accessible.\u003c\/li\u003e\n  \u003cli\u003eUse proper tension and keep belt free of oil\/grease for best life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what tools are typically needed?\u003c\/h3\u003e\n\u003cp\u003eReplacement is straightforward for most DIYers with basic hand tools; some models require lifting the deck to access idler pulleys. If you’re comfortable routing belts and loosening spring-loaded idlers, you can replace this belt in under an hour on many machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: socket set, wrench set, screwdriver, and work gloves.\u003c\/li\u003e\n  \u003cli\u003eDeck support or blocks to safely raise and secure the mower deck.\u003c\/li\u003e\n  \u003cli\u003ePhoto of original routing or manufacturer diagram aids reassembly.\u003c\/li\u003e\n  \u003cli\u003eProfessional service recommended if pulleys or spindle bearings appear damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers and homeowners who need an exact-length deck drive belt replacement for John Deere-compatible 42\" decks or compatible FasTrak\/Raptor 36\"–42\" decks. Ideal for users seeking a reinforced aftermarket belt that matches OEM fit, restores cutting performance, and reduces downtime between mowing sessions. Confirm your model and deck size before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt the exact replacement for John Deere M124895?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ILONPA belt matches the length and width for John Deere M124895 and is listed as a direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the belt work on a 36\" FasTrak deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits FasTrak 333559 specifically for a 36\" deck; verify your deck part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54195057787064,"sku":"B07V3M6R67","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-deck-belt_82c850f3-fdd3-4c3d-9266-ac805d36e725.jpg?v=1790581410"},{"product_id":"ilonpa-mower-deck-belt-1-2-x-141-5-in-aramid-cord-reinforced-fits-toro-john-deere-decks","title":"ILONPA mower deck belt 1\/2 x 141.5 in aramid-cord reinforced, fits Toro \u0026 John Deere decks","description":"\u003cstrong\u003eILONPA 119-8820 is a 1\/2\" x 141.5\" aramid-cord replacement mower deck belt engineered to fit Toro 50\" and John Deere 48\" decks plus many compatible models.\u003c\/strong\u003e\n\nThis heavy-duty replacement belt is built for mid‑size residential and commercial lawn tractors and zero-turn mowers. Made with aramid cord reinforcement for improved tensile strength and wear resistance, it replaces common OEM numbers including Toro 119-8820 and John Deere GX20571\/GX21833. The neutral gray belt matches factory specifications (1\/2\" width, 141.5\" length) and supports a wide list of deck models across Toro, John Deere, Exmark, Cub Cadet, Troy‑Bilt and others.\n\n\u003ch3\u003eWhich mowers and decks does this ILONPA belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt covers many 50\" Toro TimeCutter decks as well as 48\" John Deere decks and several Exmark and Cub Cadet models. Compatibility is broad but always check your mower's deck part number against the listed OEM references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToro: 50\" TimeCutter and ZS\/SS\/MX series — replaces 119-8820, 119-8820-SL, 114-0453 and multiple Toro deck part numbers.\u003c\/li\u003e\n  \u003cli\u003eJohn Deere: Fits many 48\" deck models including D140, D150, D160, L120, LA130 and OEM GX20571\/GX21833.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references Exmark, Cub Cadet, Troy‑Bilt, MTD, Ariens part numbers listed in the product features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does aramid cord construction benefit mower performance?\u003c\/h3\u003e\n\u003cp\u003eAramid fibers deliver higher tensile strength than standard rubber belts, reducing stretch and helping the belt hold its tension under load. That means more consistent blade speed, improved cut quality, and longer belt life in heavy grass, mulch or frequent use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists elongation under heat and load for steadier belt tracking.\u003c\/li\u003e\n  \u003cli\u003eHigher abrasion resistance reduces fraying around pulleys and idlers.\u003c\/li\u003e\n  \u003cli\u003eMaintains performance in demanding mowing conditions and frequent on\/off cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and visual details to confirm fit?\u003c\/h3\u003e\n\u003cp\u003eThe belt measures 1\/2\" wide and 141.5\" in outer circumference (length). It’s produced in a neutral gray finish and shaped to match OEM deck belt profiles, making it straightforward to compare against your current belt or the part number on your mower.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth: 1\/2\" (12.7 mm); Length: 141.5\" (outer circumference).\u003c\/li\u003e\n  \u003cli\u003eGray exterior color and OEM‑style rib\/profile for correct pulley engagement.\u003c\/li\u003e\n  \u003cli\u003eMarked or packaged with cross-reference part numbers like 119-8820 and GX20571 for easy verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this replacement deck belt?\u003c\/h3\u003e\n\u003cp\u003eInstall following the mower manufacturer’s routing diagram and recommended belt tension. Inspect pulleys, idlers and deck spindles before fitting a new belt; worn components shorten belt life. Keep the deck area clean of debris and replace the belt at the first signs of cracking or heavy fraying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off mower and disconnect spark plug prior to installation.\u003c\/li\u003e\n  \u003cli\u003eFollow OEM routing and torque recommendations for spindle and tensioner hardware.\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys, bearings and tensioners; replace worn parts to protect the new belt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThis ILONPA aramid deck belt is suited to homeowners, landscapers and fleet managers who need a reliable, OEM‑spec replacement for Toro 50\" and John Deere 48\" mowing decks and for those operating compatible Exmark, Cub Cadet, Troy‑Bilt or MTD machines. Choose it when you want improved strength and longer service life compared with standard belts, or when replacing a belt cross-referenced to the listed part numbers.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt replace Toro part number 119-8820?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ILONPA belt is a direct replacement for Toro 119-8820 and related OEM references listed in the product details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions and material?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 1\/2\" wide, 141.5\" long and constructed with aramid cord for higher tensile strength.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54195341623480,"sku":"B07TRF3P11","price":58.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-119-8820.jpg?v=1790583108"},{"product_id":"ilonpa-mower-deck-belt-1-2-x-101-for-42-46-decks-aramid-reinforced-replacement-for-john-deere-ayp-snapper","title":"ILONPA mower deck belt 1\/2\" x 101½\" for 42\/46\" decks – aramid-reinforced replacement for John Deere, AYP, Snapper","description":"\u003cp\u003e\u003cstrong\u003eILONPA 1\/2\" x 101 1\/2\" mower deck belt is a direct-replacement cutting deck drive belt built with aramid cord for high strength and reliable fit on John Deere, AYP\/Husqvarna and Snapper models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement deck belt is sized and constructed to restore cutting performance on a range of residential and light-commercial riding mowers. It matches multiple OEM part numbers used by John Deere, AYP and Snapper and is built with aramid reinforcement for improved tensile strength, wear resistance and consistent tracking. The belt is intended for 42\" and 46\" decks depending on model compatibility and offers an economical way to maintain proper blade drive without buying OEM-branded parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers does this belt replace?\u003c\/h3\u003e\n\n\u003cp\u003eThis ILONPA belt cross-references several OEM numbers so you can replace worn or broken belts without guessing. It fits many John Deere, AYP\/Husqvarna and Snapper cutting deck applications listed by manufacturers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eJohn Deere part numbers: M84136, M87323, GX25232 for multiple 42\" and 46\" decks.\u003c\/li\u003e\n  \u003cli\u003eAYP \/ Husqvarna references: 429636, 532429636, 91753242936, 598559101, 197253, 532197253.\u003c\/li\u003e\n  \u003cli\u003eSnapper replacement: 704430; compatible with YTH and YTA series models noted.\u003c\/li\u003e\n  \u003cli\u003eSizing note: nominal width 1\/2\" and effective belt length ~101 1\/2\" for listed decks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the belt constructed and why does that matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe ILONPA deck belt uses aramid cord reinforcement within a durable rubber compound to improve strength and longevity under load. That construction enhances resistance to stretching and heat, helping blades maintain consistent speed and reducing slippage under typical mowing conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAramid cord core provides high tensile strength and reduced elongation.\u003c\/li\u003e\n  \u003cli\u003eDurable outer rubber resists abrasion, oil and UV exposure.\u003c\/li\u003e\n  \u003cli\u003ePrecision molding keeps consistent belt profile for stable pulley tracking.\u003c\/li\u003e\n  \u003cli\u003eManufactured tolerances designed to match OEM belt engagement geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat deck sizes and installations work with this belt?\u003c\/h3\u003e\n\n\u003cp\u003eUse this belt for specific 42\" and 46\" deck configurations called out by the OEM cross-reference lists. It suits mid‑mount and side‑discharge cutting units on compatible residential tractors and lawn tractors; confirm your existing belt part number or measure before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits John Deere 240 riding mower with 46\" deck and several 42\" models.\u003c\/li\u003e\n  \u003cli\u003eCompatible with AYP PB195H42LT, PB2042YT, XT195H42LT and similar 42\" decks.\u003c\/li\u003e\n  \u003cli\u003eWorks with John Deere S130 and S240 when the OEM belt number matches.\u003c\/li\u003e\n  \u003cli\u003eMeasure existing belt length and width if unsure: 1\/2\" width, ~101 1\/2\" length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain this replacement deck belt?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation typically follows the mower manufacturer’s deck routing diagram. Always disconnect spark plug and secure the mower before servicing. Proper tensioning and pulley inspection will extend belt life and ensure safe, reliable cutting performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFollow your mower’s deck routing and tension procedure in the operator manual.\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and spindle bearings; replace worn components to avoid premature belt failure.\u003c\/li\u003e\n  \u003cli\u003eClean grass, debris and oil from belt path and pulleys before fitting the new belt.\u003c\/li\u003e\n  \u003cli\u003eRe-check tension after first mow and periodically during the season.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 1\/2\" x 101 1\/2\" deck belt is for homeowners, landscapers and small-farm users who need an affordable, durable replacement for worn mower deck belts on John Deere, AYP\/Husqvarna and Snapper machines. If your mower’s OEM part number appears in the cross-reference list or your measurements match, this belt provides an aramid-reinforced option to restore blade drive reliability without the OEM price tag.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit my John Deere S240 with a 42\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this ILONPA belt cross-references John Deere part numbers used on S240 42\" decks; verify your current OEM number or measurements first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material strengthens this replacement belt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt uses aramid cord reinforcement, which increases tensile strength and reduces stretching under load.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54195375898808,"sku":"B07FKL3QR7","price":56.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-belt.jpg?v=1790583319"},{"product_id":"ilonpa-deck-mower-belt-1-2-x-96-1-2in-for-42-decks-aramid-cord-reinforced-replacement-for-cub-cadet-craftsman-john-deere","title":"ILONPA Deck Mower Belt 1\/2 x 96-1\/2in for 42\" Decks — Aramid Cord Reinforced Replacement for Cub Cadet, Craftsman, John Deere","description":"\u003cp\u003e\u003cstrong\u003eThis is a 1\/2\" x 96-1\/2\" aramid-cord replacement deck belt designed to drive 42\" mower decks on select Cub Cadet, Craftsman, Troy-Bilt, John Deere and compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a deck belt fails, the lawn tractor loses blade power and cutting performance. The ILONPA deck belt matches the original equipment geometry for many 42\" decks and mid-frame drive systems, offering aramid cord reinforcement for higher tensile strength and improved wear resistance compared with generic rubber-only belts. It’s a direct replacement for numerous OEM part numbers, so you can restore deck function quickly without modifying pulleys or spindles.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this belt fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe belt is engineered for 42\" deck applications and mid-frame engine-to-deck routing on a long list of makes and models. It replaces multiple OEM numbers used by Cub Cadet, Craftsman, Troy-Bilt, John Deere and other brands.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Cub Cadet LTX1040, LTX1042 and LT models (various year ranges) and multiple Craftsman garden tractor models (T1000–T1400 series, LT1500, LT2000, etc.).\u003c\/li\u003e\n  \u003cli\u003eCompatible with Troy-Bilt Pony and Bronco 42\" deck configurations and many model suffixes listed by OEM.\u003c\/li\u003e\n  \u003cli\u003eDirect cross-reference for John Deere M118790, M125218 and Sabre GX10065\/GX10851 part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this belt built and why does it matter?\u003c\/h3\u003e\n\n\u003cp\u003eILONPA uses aramid cord reinforcement in the belt carcass to boost tensile strength and resistance to stretching. That construction helps the belt hold tension under load so deck speed and blade engagement remain consistent during mowing sessions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAramid cord increases durability versus standard textile cord spans.\u003c\/li\u003e\n  \u003cli\u003eGray compound and factory profile match OEM belt geometry for smooth pulley tracking.\u003c\/li\u003e\n  \u003cli\u003eDimensions: nominal width 1\/2\" and outside length 96-1\/2\" for correct routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the replacement belt?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows the mower’s deck routing diagram—typically around engine pulley, tensioner\/idlers and deck spindles. Regular checks of deck pulleys and spindle bearings will extend belt life and avoid premature failure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRefer to your owner’s manual routing diagram or mark the old belt before removal.\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys, idlers and spindles for wear or misalignment when changing the belt.\u003c\/li\u003e\n  \u003cli\u003eKeep the deck free of debris and replace the belt at signs of cracking, glazing, or fraying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt replace multiple OEM numbers I see in parts lists?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this ILONPA belt cross-references many common part numbers used across manufacturers. It’s intended as a direct aftermarket equivalent to simplify parts sourcing for 42\" decks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCross-references include Cub Cadet 954-04060 series, 754-04060 series, 954-05056 and similar numbers.\u003c\/li\u003e\n  \u003cli\u003eAlso listed as replacement for John Deere M118790, M125218 and other OEM identifiers.\u003c\/li\u003e\n  \u003cli\u003eWorks for many Troy-Bilt Pony and Bronco 42\" deck part lists and selected Craftsman models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This replacement belt is aimed at homeowners, landscapers and repair technicians maintaining 42\" lawn tractor decks who need an exact-dimension, reinforced belt without modifying equipment. If you own a compatible Cub Cadet, Craftsman, Troy-Bilt, John Deere or other labeled model and you want an aramid-reinforced aftermarket alternative that matches OEM length and width specs, this ILONPA deck belt is designed to get your blades turning again with reliable tension retention and straightforward installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt the correct size for a 42\" Cub Cadet deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The belt measures 1\/2\" wide by 96-1\/2\" long and is made for many 42\" deck applications on Cub Cadet models listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the belt reinforced with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt uses aramid cord reinforcement for higher tensile strength and improved resistance to stretching.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54195456934072,"sku":"B07TZRQ1K1","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-belt-packaging.jpg?v=1790583590"},{"product_id":"ilonpa-idler-pulley-replacement-for-john-deere-48-decks-3-pack-oem-fit-gy22172-gy20629-for-d-la-x-series-heavy-duty-bearings","title":"ILONPA Idler Pulley Replacement for John Deere 48\" Decks — 3-Pack, OEM Fit GY22172\/GY20629 for D\/LA\/X Series, Heavy-Duty Bearings","description":"\u003cp\u003e\u003cstrong\u003eThese three ILONPA idler pulleys are direct-fit replacement parts engineered to restore belt tension and smooth deck operation on many John Deere lawn tractors and 48-inch mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower deck squeals, loses blade speed, or the belt slips, worn idler pulleys are a common cause. The ILONPA GY22172\/GY20629 (three-pack) set contains the pulleys that match OEM fitments for numerous John Deere and compatible models, letting you replace failed pulleys quickly and get back to mowing with more consistent power transfer and reduced vibration.\u003c\/p\u003e\n\n\u003ch3\u003eWhich John Deere models and part numbers will these pulleys fit?\u003c\/h3\u003e\n\u003cp\u003eThe pulleys in this bundle are made to replace multiple OEM references including GY22172, GY20067, GY20629, GY20110 and GY22082. They cover a broad range of John Deere lawn tractors, compact tractors, and mower deck applications—especially many models that use 48-inch decks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces GY22172 and GY20067 (two of the set) and GY20629\/GY20110\/GY22082 (one of the set).\u003c\/li\u003e\n  \u003cli\u003eCompatible with L2048, L2548 48\" deck applications and many D, LA, X, L and Z series models.\u003c\/li\u003e\n  \u003cli\u003eWorks on popular residential models such as 102, 105, 115, 125, 140–165 series listed in manufacturer fitments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing these idler pulleys affect cutting performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing degraded idler pulleys helps restore proper belt alignment and tension, which improves blade speed stability and reduces belt slip under load. That translates to smoother cutting, fewer missed passes, and less stress on the deck drive components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces belt slip and uneven blade speed.\u003c\/li\u003e\n  \u003cli\u003eMinimizes chatter and vibration for cleaner cuts.\u003c\/li\u003e\n  \u003cli\u003eHelps extend belt and spindle life by restoring correct tension path.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability details?\u003c\/h3\u003e\n\u003cp\u003eILONPA manufactures these pulleys from durable materials intended for outdoor power equipment use, with bearings and mounts built to handle typical lawn-mower loads. They are not aftermarket cast-offs—they are designed to meet fit, form, and functional expectations so you can swap them into the deck with standard tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty housing and precision bearing for smoother rotation.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finishes suitable for mower environments.\u003c\/li\u003e\n  \u003cli\u003eSupplied as a 3-pack to replace multiple worn pulleys in one service visit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I have on hand?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic mower maintenance: raise the deck, remove the belt, swap the pulleys, and re-route the belt. No specialty tools are typically required beyond common wrenches, sockets, and possibly a pry tool for belt removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrepare hand tools: ratchet, sockets, wrenches, and pliers.\u003c\/li\u003e\n  \u003cli\u003eHave replacement hardware or lock washers available if original fasteners are damaged.\u003c\/li\u003e\n  \u003cli\u003eFollow your mower’s service manual for deck removal or belt routing diagrams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 3-pack is aimed at homeowners, landscapers, and maintenance techs who own or service John Deere tractors and need a reliable, cost-effective replacement for worn idler pulleys. It’s ideal when multiple pulleys show wear or when you want to keep spare parts on hand for routine deck maintenance and longer uptime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this 3-pack include all pulley types listed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set contains the pulleys that replace GY22172\/GY20067 (two) and GY20629\/GY20110\/GY22082 (one).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these without professional help?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most homeowners can install them with basic hand tools and the mower’s belt routing diagram; follow safety steps and the service manual.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199512924344,"sku":"B0BL7K4ZNF","price":77.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-idler-pulley-front-packaging.jpg?v=1790595673"},{"product_id":"ilonpa-54-inch-3-pack-6-point-star-mower-blades-high-lift-replacement-for-cub-cadet-troy-bilt-craftsman","title":"ILONPA 54-inch 3‑Pack 6‑Point‑Star Mower Blades — High‑Lift Replacement for Cub Cadet, Troy‑Bilt, Craftsman","description":"\u003cp\u003e\u003cstrong\u003eHigh‑lift, 6‑point star center replacement blades for 54\" mower decks — ILONPA 942-05056A three‑pack designed for compatible Cub Cadet, Troy‑Bilt, Craftsman and Columbia 54\" models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 54‑inch zero‑turn or lawn tractor needs durable replacement blades that restore cutting performance and consistent bagging, these ILONPA 6‑star blades are made to match original equipment tolerances for many 2015–2020 Cub Cadet XT\/ZT models and a wide range of Troy‑Bilt and Craftsman machines. Each blade is a 2‑in‑1 high‑lift profile built for strong airflow and a clean cut across standard 54\" decks; the set ships as three blades so you can replace an entire spindle assembly in one service session.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models will these blades fit?\u003c\/h3\u003e\n\n\u003cp\u003eThese blades are intended for 54\" decks with a 6‑point star center hole. They are compatible with specific Cub Cadet XT1\/XT2 and ZT1\/ZT2 Ultima machines from recent model years plus multiple Troy‑Bilt, Craftsman and Columbia 54\" tractors and zero‑turn mowers listed by the manufacturer. Always compare the center hole shape on your current blade before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many Cub Cadet: XT1, XT2 (2015–2020) and ZT1\/ZT2 (2019–2020) 54\" models\u003c\/li\u003e\n  \u003cli\u003eWorks with Troy‑Bilt Mustang and Z 54 zero‑turns and TB 2454 tractors\u003c\/li\u003e\n  \u003cli\u003eCompatible with Craftsman Zurn series and T\/G garden tractors with 54\" decks\u003c\/li\u003e\n  \u003cli\u003eAlso fits select Columbia 54\" zero‑turns and tractors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know if I need the 6‑star hole blade or a different type?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure the center hole on your current blade: this ILONPA blade uses a 6‑point star pattern with a 1\" (25.4 mm) nominal center. Some older or alternate 54\" models use an S‑shaped center opening — those require a different part number. Choosing the correct hole pattern prevents improper seating, wobble and premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6‑point star center = this ILONPA 942‑05056A blade\u003c\/li\u003e\n  \u003cli\u003eS‑shaped center = order MPN 738‑05081 \/ 490‑110‑C194 \/ 742P05086 instead\u003c\/li\u003e\n  \u003cli\u003eCheck blade thickness and lift type to match spindle and deck specs\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, remove a blade and photograph the hole shape for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the blade dimensions and key specifications?\u003c\/h3\u003e\n\n\u003cp\u003eThese replacement blades are full‑length 2‑in‑1 high‑lift units sized for 54\" decks. Dimensions and center geometry match factory tolerances for the part numbers listed, and the three‑blade package covers a complete deck change. The high‑lift profile improves grass lift for bagging and clipping discharge on compatible machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 18‑4\/7\" (472 mm); width: 2‑3\/8\" (60 mm)\u003c\/li\u003e\n  \u003cli\u003eThickness: 1\/6\" (4 mm); center hole: 6‑point star, 1\" (25.4 mm)\u003c\/li\u003e\n  \u003cli\u003eAir lift: ~1‑2\/9\" (31 mm); type: 2‑in‑1 high‑lift blade\u003c\/li\u003e\n  \u003cli\u003ePackage: 3 blades (enough to replace an entire 54\" deck set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these myself and what should I watch for?\u003c\/h3\u003e\n\n\u003cp\u003eInstalling blade replacements is a routine maintenance task if you have the right tools and follow safety steps: disconnect the spark plug, raise and secure the deck, and torque blades to manufacturer bolt specs. Inspect spindles and mounting hardware for wear; replace any damaged bolts or washers to ensure correct alignment and balance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways disconnect spark and stabilize the mower before working underneath\u003c\/li\u003e\n  \u003cli\u003eUse proper torque and new mounting hardware if bolts are worn or rounded\u003c\/li\u003e\n  \u003cli\u003eBalance blades and confirm clearance to deck and chute after install\u003c\/li\u003e\n  \u003cli\u003eContact seller\/manufacturer if unsure about fit or compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ILONPA 942‑05056A blades are aimed at owners and service technicians of 54\" Cub Cadet XT\/ZT series (specified model years), Troy‑Bilt Mustang\/Z 54, Craftsman Zurn\/T series, Columbia 54\" machines and similar garden tractors and zero‑turn mowers that require a 6‑point star center, 2‑in‑1 high‑lift replacement. If you need a three‑blade set to restore deck performance, prefer OEM‑style dimensions, and have a 54\" deck with the 6‑star hole, this pack will meet standard replacement needs. If your blades show an S‑shaped center, choose the alternate MPN listed to avoid mismatches.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit my 54\" Cub Cadet XT1 or XT2?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for many 2015–2020 XT1\/XT2 54\" models that use a 6‑point star center; verify your blade hole shape before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if my blade has an S‑shaped center hole?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you have an S‑shaped center, order the alternative part numbers (e.g., 738‑05081) — these ILONPA blades will not fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199569023160,"sku":"B0B178VCQ5","price":81.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-54inch-blade.jpg?v=1790596398"},{"product_id":"ilonpa-48-high-lift-2-in-1-mower-blades-for-john-deere-scotts-fits-gx20250-gy20568-black-set","title":"ILONPA 48\" High-Lift 2-in-1 Mower Blades for John Deere \u0026 Scotts — Fits GX20250 GY20568, Black (Set)","description":"\u003cb\u003eThese ILONPA 48-inch 2-in-1 high-lift replacement mower blades deliver stronger upward airflow for cleaner cuts, improved bagging, and better mulching on compatible John Deere and Scotts 48\" decks.\u003c\/b\u003e\n\n\u003cp\u003eIf your lawn tractor's 48\" deck needs new blades, this ILONPA set replaces OEM part numbers GX20250 and GY20568 and fits a wide range of John Deere, Sabre, and Scotts models. The blades are engineered as high-lift 2-in-1 blades: they produce increased suction to lift grass before cutting, which helps move clippings efficiently into the bag or mulcher while reducing surface debris. Each blade is finished with a protective paint on the cutting edge to reduce corrosion and to protect handlers during installation; that coating wears off with normal use.\u003c\/p\u003e\n\n\u003ch3\u003eWhich tractors and decks are these blades compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese blades are designed to work with many 48\" lawn tractor decks from John Deere, Sabre, and Scotts. Check your deck size and the OEM part references to confirm fit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits John Deere: L120, L130, L2048, L2548, 1948, 2048, 2148 series\u003c\/li\u003e\n  \u003cli\u003eFits Sabre: 1948GV, 1948HV, 2148HV, 1642HS, 1742HS 48\" decks\u003c\/li\u003e\n  \u003cli\u003eFits Scotts: L2048 and L2548 (2002 series) with 48\" decks\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: GX20250 and GY20568\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these blades sized and what are the mounting details?\u003c\/h3\u003e\n\u003cp\u003eThe blades have specific dimensions and a round center hole to match 48\" deck hub fittings. Measure your current blades to ensure the length, width and bore size align for safe installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall blade length: 17 inches (approximately 432 mm)\u003c\/li\u003e\n  \u003cli\u003eCutting edge width: about 2.4 inches (62.5 mm)\u003c\/li\u003e\n  \u003cli\u003eThickness: roughly 0.15 inches (3.8 mm)\u003c\/li\u003e\n  \u003cli\u003eCenter hole: circular bore about 0.67 inches (17.2 mm); air-lift pocket height ~1.17 inches (30 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect from a high-lift 2-in-1 blade?\u003c\/h3\u003e\n\u003cp\u003eHigh-lift 2-in-1 blades combine strong suction with a profile suited for both bagging and mulching. They are particularly useful when you want cleaner discharge into a collector or improved clipping dispersion for mulching across the lawn.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStronger upward airflow lifts grass for a more consistent cut\u003c\/li\u003e\n  \u003cli\u003eImproved bagging efficiency—less residue left behind\u003c\/li\u003e\n  \u003cli\u003eEffective mulching capability when used with mulching plug or compatible deck setup\u003c\/li\u003e\n  \u003cli\u003eHelps reduce surface thatch and visible clippings compared with low-lift designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there installation details or safety notes I should know?\u003c\/h3\u003e\n\u003cp\u003eInstallation is similar to most tractor blade swaps but requires proper tools and following your tractor manufacturer’s torque and safety procedures. The painted cutting edges are a temporary protective coating and will abrade off during normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect spark plug and follow tractor safety steps before working under the deck\u003c\/li\u003e\n  \u003cli\u003eUse correct-length bolts and torque to your mower manufacturer’s specification\u003c\/li\u003e\n  \u003cli\u003ePaint on the cutting edge prevents rust and protects the installer; it will wear off quickly in use\u003c\/li\u003e\n  \u003cli\u003eInspect blades periodically for nicks, balance, and proper attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ILONPA high-lift replacement blades are intended for homeowners and lawn-care pros who use 48\" deck lawn tractors from John Deere, Sabre, or Scotts and want better bagging or mulching performance than standard low-lift blades. They suit anyone replacing worn OEM GX20250 or GY20568 blades, or upgrading to a high-lift profile to improve clipping pickup and finish quality across medium- to large-sized yards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my John Deere L120 or L130?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these ILONPA blades replace GX20250 and fit L120 and L130 48\" decks when the center-bore and length match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the cutting edges need to be cleaned before first use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—the painted edge is a protective coating that will wear off quickly during initial mowing; do not remove it manually.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199569907896,"sku":"B09Z66MB98","price":81.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-48-inch-blades.jpg?v=1790596418"},{"product_id":"ilonpa-42-inch-5-star-mulching-blades-2-pack-for-craftsman-husqvarna-poulan-3-in-1-air-lift-cut","title":"ILONPA 42-inch 5-Star Mulching Blades — 2-Pack for Craftsman Husqvarna Poulan, 3-in-1 Air-Lift Cut","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength 42-inch 5-star mulching mower blades from ILONPA replace OE part 138971 and deliver reliable 3-in-1 cutting for compatible Craftsman, Husqvarna and Poulan 42\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two mulching blades are built to the same key dimensions and mounting pattern as the original 138971-style blades so they fit a wide range of 42\" riding mowers and zero-turns. They combine a star-shaped center mounting hole, reinforced thickness and air-lift geometry to produce a consistent cut, effective grass circulation and improved clippings discharge for side-discharge, bagging or mulching. The cutting edges ship painted for installer safety and wear off during initial use.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will these ILONPA 42\" blades fit?\u003c\/h3\u003e\n\u003cp\u003eThey’re designed to match the 5-point star center hole and the exact length, width and thickness specified for many popular models. The compatibility list includes numerous Craftsman, Husqvarna, Poulan, Ariens and Snapper models with 42\" decks and the same star-type center mount.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCraftsman: LT1000, LT2000, T110, YT3000 series and similar 42\" tractors.\u003c\/li\u003e\n  \u003cli\u003eHusqvarna: YTH\/YT series such as YTH22V42, YTH18542, YTA18542, YT42CS\/LS and many more.\u003c\/li\u003e\n  \u003cli\u003ePoulan\/AYP, Ariens and Snapper models listed under OE numbers like 127843, 532138971, 127843, 21546095 and 704429.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades affect cut quality and clippings management?\u003c\/h3\u003e\n\u003cp\u003eThe blades are 3-in-1 mulching blades with an air-lift profile that helps lift grass into the blade stream for finer chopping and even distribution. That geometry helps when switching between mulching, bagging or side-discharge without changing blade type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir-lift height: ~27.5mm for improved grass circulation under the deck.\u003c\/li\u003e\n  \u003cli\u003e3-in-1 edge design supports mulching, bagging and side-discharge operations.\u003c\/li\u003e\n  \u003cli\u003eBalanced five-point star mount reduces vibration and promotes even cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and mounting specifics?\u003c\/h3\u003e\n\u003cp\u003eAccurate sizing and the correct center hole pattern are critical for safe operation; these ILONPA blades match the OE measurements so they install without modification. Thickness, length and center hole size reflect the original part standards for 42\" decks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall blade length: 20-7\/8\" (530 mm).\u003c\/li\u003e\n  \u003cli\u003eWidth: 56.5 mm; thickness: 3.5 mm; center hole: 5\/8\" (16 mm) five-point star.\u003c\/li\u003e\n  \u003cli\u003eAir lift (blade belly height): ~27.5 mm supporting efficient lift and cut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any installation or safety notes I should know?\u003c\/h3\u003e\n\u003cp\u003eThe cutting edges are coated with paint to prevent surface rust and to lower burr risk during handling. That protective paint will abrade off during initial mowing; do not intentionally scrape or grind it off before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEdges come painted for rust protection and installer safety.\u003c\/li\u003e\n  \u003cli\u003ePaint will wear off after a few minutes of normal cutting—no pre-removal required.\u003c\/li\u003e\n  \u003cli\u003eAlways follow manufacturer torque specs and safety steps when replacing blades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ILONPA 42\" 5-star mulching blades suit homeowners and landscapers who own a compatible 42\" riding mower or zero-turn and need OE-fit replacement blades that support mulching, bagging and side-discharge. They are best for users who want a direct-fit, durable two-blade pack designed to restore cutting performance and deck airflow for machines using part numbers such as 138971, 532138971, 127843 and related OEM listings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my Husqvarna YTH18542?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These ILONPA blades match the 5-point star mount and dimensions used on the Husqvarna YTH18542 and similar 42\" deck models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove the painted edge before mowing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The painted safety coating wears off during the first few minutes of normal mowing and does not need pre-removal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199628857528,"sku":"B09Z2QR97H","price":75.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-packaging.jpg?v=1790597256"},{"product_id":"ilonpa-42-high-lift-7-star-replacement-mower-blades-for-john-deere-d100-x300-series-2-pack-black-4-5mm-thick","title":"ILONPA 42\" High-Lift 7-Star Replacement Mower Blades for John Deere D100 X300 Series, 2-Pack Black, 4.5mm Thick","description":"\u003cp\u003e\u003cstrong\u003eILONPA AM141034 high-lift 42\" replacement mower blades are a two-pack of 7-point-star, high-lift blades engineered to fit many John Deere 42-inch decks and deliver stronger airflow, improved bagging, and a cleaner cut.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese replacement blades are designed to match the John Deere AM141034 mounting pattern (7-star center hole) and key dimensions so you can swap them into compatible 42-inch lawn tractor and zero-turn decks. Manufactured as high-lift blades, they prioritize upward air motion for better clippings discharge and bagging performance while resisting warping with a 4.5 mm thickness. The set includes two blades painted on the cutting edges for corrosion protection during handling and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my John Deere D100 or X300 series mower?\u003c\/h3\u003e\n\u003cp\u003eYes — these AM141034-style blades are manufactured to the 7-star center pattern and the 42\" deck sizing common to many John Deere residential models. Check your original blade part number or the center-hole shape to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models listed include D100\/D110\/D120\/D130\/D125 variants and X300\/X304\/X310\/X320 series.\u003c\/li\u003e\n  \u003cli\u003eAlso fits LA, LT, E and selected EZtrak Z-series residential mowers (e.g., Z225, Z235).\u003c\/li\u003e\n  \u003cli\u003eMatch blade length 21-1\/4\" (540mm) and 7\/8\" (22.2mm) center hole to verify fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do high-lift blades like these affect cutting and bagging?\u003c\/h3\u003e\n\u003cp\u003eHigh-lift blades generate stronger upward airflow beneath the deck, which helps lift grass for a more even cut and moves clippings efficiently into bags or the discharge chute. That airflow also reduces clumping and can improve mulching when used with compatible deck designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates stronger suction to lift grass blades for uniform cutting height.\u003c\/li\u003e\n  \u003cli\u003eImproves bagging efficiency by transporting clippings into the collector faster.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce surface clumping and thatch accumulation under the deck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and mounting details I should know?\u003c\/h3\u003e\n\u003cp\u003eThese blades measure 21-1\/4\" long, 2-5\/8\" wide, and 1\/6\" (4.5 mm) thick, with a 7-point star center and a 7\/8\" (22.2 mm) center hole. The air-lift height is specified at about 1-3\/7\" (36 mm), and they are supplied as a high-lift profile to match OEM lift characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 21-1\/4\" (540 mm); Width: 2-5\/8\" (66.5 mm).\u003c\/li\u003e\n  \u003cli\u003eThickness: 4.5 mm; Center hole: 7-point star, 7\/8\" diameter.\u003c\/li\u003e\n  \u003cli\u003eHigh-lift profile with 36 mm (approximately) air-lift height for strong suction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs there anything special about the painted cutting edge?\u003c\/h3\u003e\n\u003cp\u003eThe cutting edges are coated with a protective paint to prevent rust and reduce the risk of accidental nicks during handling and installation. This coating is temporary and will wear off quickly during initial use; it is not a replacement for sharpening if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge paint prevents corrosion during storage and shipping.\u003c\/li\u003e\n  \u003cli\u003ePaint reduces installer injury risk during blade handling; it will wear away with first use.\u003c\/li\u003e\n  \u003cli\u003eRe-sharpen blades after the paint wears for optimal cutting performance if necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 2-pack from ILONPA is intended for homeowners, groundskeepers, and small-property landscapers who operate John Deere residential tractors, zero-turn mowers, or compatible lawn-and-garden machines with a 42\" deck and a 7-star center hole. Choose these blades if you need OEM-style fitment, want stronger bagging and discharge performance, and prefer a thicker high-lift blade for durability during routine lawn maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit a John Deere X320?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they fit many X300-series mowers including X320 if your deck is 42\" with the 7-star center pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I remove the paint before first use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the paint protects edges and will wear off during initial cutting; do not strip it beforehand.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199641211064,"sku":"B0B12FJLQK","price":87.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-42-inch-blades-packaging.jpg?v=1790597320"},{"product_id":"ilonpa-130-x-1-2-mower-deck-belt-130-circumference-aramid-cord-gray-cover-for-42-50-decks","title":"ILONPA 130 x 1\/2 Mower Deck Belt — 130\" circumference, aramid cord, gray cover for 42\"–50\" decks","description":"\u003cstrong\u003eILONPA 130 x 1\/2 mower deck belt is a gray, aramid-cord replacement belt designed to restore deck drive performance on compatible Ariens, Gravely, Toro, MTD\/Cub Cadet and Simplicity zero-turn and riding mowers.\u003c\/strong\u003e\n\n\u003cp\u003eIf your mower deck has a worn or broken drive belt, this ILONPA replacement gives you a direct-fit option for many common models—measuring 130 inches in circumference and 1\/2 inch wide with a durable aramid cord core. The belt’s gray cover and reinforced construction are built to handle frequent engagement, tension, and pulleys found on 42\" and 50\" deck setups. It replaces OEM numbers such as Ariens 07200523\/7200523, Toro 93-3884 and MTD\/Cub Cadet 954-0491\/754-0491, simplifying repairs with a single compatible part.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models does this belt work with?\u003c\/h3\u003e\n\u003cp\u003eThis belt is compatible with a range of Ariens and Gravely decks plus select Toro, MTD\/Cub Cadet and Simplicity machines. Check your deck size and part number to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Ariens Ikon-X, Ikon-XD, Ikon-XL 42\" and Zoom 42\"\/50\" decks.\u003c\/li\u003e\n  \u003cli\u003eFits Gravely ZT 34, ZT 42, ZTX 42 and ZT XL 42 decks and specific Gravely part lists.\u003c\/li\u003e\n  \u003cli\u003eReplaces Toro 93-3884; MTD\/Cub Cadet 954-0491 and 754-0491; Simplicity 1716959SM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the construction affect belt life and performance?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA belt uses an aramid cord core for increased tensile strength and resistance to stretching under load. That core, combined with a rugged cover, reduces slippage and helps maintain proper deck tension and cutting consistency across seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid cord resists elongation compared with polyester belts.\u003c\/li\u003e\n  \u003cli\u003eReinforced edges help resist fraying and pulley wear.\u003c\/li\u003e\n  \u003cli\u003eGray cover designed for outdoor abrasion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installation?\u003c\/h3\u003e\n\u003cp\u003eMeasure the old belt and inspect idlers, pulleys and spindle assemblies to ensure the new belt runs on sound components. Replacing a worn belt without addressing damaged pulleys often leads to premature failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm belt length: 130\" circumference and 1\/2\" width match your deck.\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and idler bearings for wobble or corrosion.\u003c\/li\u003e\n  \u003cli\u003eReplace hardware or tighten adjustments as recommended by the mower manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizing and part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis ILONPA belt is made to replace a set of OEM part numbers across brands, making it a convenient aftermarket alternative. Cross-reference your mower’s parts diagram to ensure correct application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM equivalents include Ariens 07200523, 7200523 and Toro 93-3884.\u003c\/li\u003e\n  \u003cli\u003eAlso replaces MTD\/Cub Cadet 954-0491, 754-0491 and Simplicity 1716959SM.\u003c\/li\u003e\n  \u003cli\u003eWorks with specific Gravely and Ariens model lists—verify numbers in your parts manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ILONPA 130 x 1\/2 deck belt is intended for DIY owners, landscapers and repair shops needing a reliable, direct-fit replacement for mid-size deck systems (42\" and 50\"). It suits users who want a stronger aramid-cord construction than standard belts and who can confirm the belt’s 130\" length and 1\/2\" width match their mower’s requirements. If your mower is listed among the supported Ariens, Gravely, Toro, MTD\/Cub Cadet or Simplicity models and you want a long-lasting aftermarket belt, this product provides a cost-effective repair option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this belt the same size as the OEM 07200523?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — ILONPA is 130\" circumference and 1\/2\" wide and replaces Ariens 07200523\/7200523 when that size is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this belt on a 50\" Zoom deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the belt fits Zoom 50\" models listed under compatible Ariens decks; confirm with your deck’s parts diagram.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199685185720,"sku":"B07V2F19B3","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-belt.jpg?v=1790597878"},{"product_id":"ilonpa-deck-drive-belt-118-1-4-x-1-2-aramid-cord-oem-fit-for-cub-cadet-mtd-snapper","title":"ILONPA Deck Drive Belt 118-1\/4 x 1\/2 — Aramid cord, OEM-fit for Cub Cadet\/MTD\/Snapper","description":"\u003cp\u003e\u003cstrong\u003eILONPA 118-1\/4 x 1\/2 deck drive belt is a direct-fit aramid-cord replacement designed to restore reliable power transfer for select Cub Cadet, MTD, Husqvarna, AYP, Simplicity and Snapper mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or cracked deck belt leaves your mower slipping, smoking or failing to engage, swapping in a correctly sized, high-strength replacement gets you back to mowing without guesswork. This 118 1\/4\" long, 1\/2\" wide belt uses aramid cord reinforcement for improved tensile strength and resistance to stretching, and it’s formulated to match the OEM part numbers used across a wide range of zero-turn and riding mower models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers will this belt replace?\u003c\/h3\u003e\n\u003cp\u003eThis ILONPA belt is built to replace the common OEM references found on many garden tractors and zero-turn mowers. It fits several Cub Cadet, MTD, Husqvarna, AYP, Simplicity, Snapper and related models that originally used the listed part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM: Cub Cadet 754-04033, 754-04033A, 954-04033, 954-04033A\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with MTD, AYP, Husqvarna and Poulan part 574173003\u003c\/li\u003e\n  \u003cli\u003eFits Simplicity\/Snapper\/Ferris references: 1732956, 1732956SM, GX25628\u003c\/li\u003e\n  \u003cli\u003eIntended for decks including Cub Cadet RZT-L42, RZT-S42, RZT-242 and select 42\"\/46\" Autodrive frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aramid cord construction improve belt performance?\u003c\/h3\u003e\n\u003cp\u003eAramid fibers are chosen for their high tensile strength and low stretch characteristics, which help the belt maintain tension and resist elongation under load. That steadier tension reduces slipping and improves power delivery from the engine to the deck for cleaner, more consistent blade rotation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid cord reinforcement for reduced stretching and longer service life\u003c\/li\u003e\n  \u003cli\u003eHigh tensile strength resists tearing under heavy load\u003c\/li\u003e\n  \u003cli\u003eStable geometry helps maintain proper pulley alignment and tension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat measurements and physical features should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirming the belt’s length and width against your mower’s specifications prevents compatibility issues and installation headaches. Measure the old belt laid flat or verify the OEM number listed on your machine’s parts diagram.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact size: 118 1\/4 inches in circumference by 1\/2 inch wide\u003c\/li\u003e\n  \u003cli\u003eColor: gray — useful for quick visual matching to OEM belts\u003c\/li\u003e\n  \u003cli\u003eDesigned as a deck\/drive belt — intended for blade drive and related pulley routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this belt myself and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eMany homeowners and DIY mechanics can replace a mower deck belt with basic hand tools and a safe working posture. Follow your mower’s service manual for deck removal or lift procedures, route the new belt according to the diagram, and tension per manufacturer recommendations to avoid premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation requires standard tools and adherence to the mower’s belt-routing diagram\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and idlers for wear before installing to maximize belt life\u003c\/li\u003e\n  \u003cli\u003eIf unsure, consult a local service shop or authorized dealer for fitment help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 118-1\/4 x 1\/2 aramid cord deck drive belt is aimed at homeowners, landscapers and repair shops seeking a durable OEM-compatible replacement for popular Cub Cadet, MTD, Husqvarna, AYP, Simplicity and Snapper mower decks. Choose this belt if you need a precise-length, low-stretch replacement that matches the referenced part numbers and restores consistent deck performance without upgrading pulleys or other components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit my Cub Cadet RZT-S42?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this ILONPA belt fits Cub Cadet RZT-S42 models that use the 118-1\/4\" x 1\/2\" deck belt and OEM part numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the belt made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt uses aramid cord reinforcement for high tensile strength and reduced stretch compared to standard belts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199819108536,"sku":"B07V4RFYX6","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-deck-belt_3857f38c-d290-4838-83ea-20f00ce5bdd4.jpg?v=1790600634"},{"product_id":"ilonpa-42-mulching-blades-2-pack-black-toothed-3-in-1-replacement-set","title":"ILONPA 42\" Mulching Blades 2-Pack Black — Toothed 3-in-1 Replacement Set","description":"\u003cp\u003e\u003cstrong\u003eThese ILONPA 42\" mulching blades (model 942-04308) are a pair of 3-in-1, toothed replacement blades designed to fit many 42-inch lawn tractors and zero-turn mowers for efficient mulching, side-discharge, or bagging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you need to refresh dull blades or convert worn cutting edges back to mulching performance, these heavy-duty steel blades are sized and drilled to match common 42\" decks from brands such as Cub Cadet, Troy-Bilt, Craftsman, White\/Columbia and Toro. Each blade is engineered with a toothed profile to improve grass lift and mulching action; two blades are included so you can replace both sides of a typical 42\" deck at once.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my mower model?\u003c\/h3\u003e\n\u003cp\u003eThese blades are made to fit a long list of 42\" tractors and zero-turn models, but center-hole style matters—confirm your spindle center hole before ordering. If your deck uses the 6-point star center hole and the specified dimensions match, these blades will install as direct replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model families: Cub Cadet XT1\/XT2\/XT2-LX, RZT\/ZT1 series, Troy-Bilt Bronco\/Pony\/Mustang series, many Craftsman T-series and Z-series, White\/Columbia and Toro LX models.\u003c\/li\u003e\n  \u003cli\u003eCenter hole type: 6-point star, center hole diameter ~1\" (25.7 mm).\u003c\/li\u003e\n  \u003cli\u003eBlade dimensions: length ~21-1\/7\" (537 mm), width 2-3\/8\" (60 mm), thickness 1\/7\" (3.8 mm).\u003c\/li\u003e\n  \u003cli\u003eIf your blade has an S-shaped or 5-star hole, check the alternate MPNs called out to avoid mismatches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades improve cutting and mulching?\u003c\/h3\u003e\n\u003cp\u003eThe toothed edge design increases airflow under the deck and chops clippings finer, helping grass return to the lawn more naturally. They’re rated as 3-in-1 blades, so you can use them for mulching, side discharge, or bagging depending on your deck configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToothed cutting edge enhances lift and mulching action for finer clippings.\u003c\/li\u003e\n  \u003cli\u003eAir lift height ~1-1\/9\" (28 mm) for consistent grass flow across the deck.\u003c\/li\u003e\n  \u003cli\u003eDurable stamped steel construction resists bending and chips under normal use.\u003c\/li\u003e\n  \u003cli\u003eSold as a two-piece set so both left and right blades are renewed together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and compatibility details I should check?\u003c\/h3\u003e\n\u003cp\u003eBefore installing, compare the blade length, thickness, hole pattern, and lift height with your existing blades. Use proper safety steps: disconnect spark plug, wear gloves, and tighten mounting hardware to factory torque specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure current blade length and center hole shape to verify match.\u003c\/li\u003e\n  \u003cli\u003eConfirm blade thickness (~3.8 mm) and width fit your spindle adapters and deck clearances.\u003c\/li\u003e\n  \u003cli\u003eReplace both blades on a 42\" deck to maintain balance and even cut.\u003c\/li\u003e\n  \u003cli\u003eKeep original mounting bolts or use manufacturer-recommended hardware and torque settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre replacement part numbers and alternate options listed?\u003c\/h3\u003e\n\u003cp\u003eYes—these blades correspond to several OEM numbers, making cross-referencing simpler when searching for fits or alternates. Check the listed MPNs if you see a different center-hole style on your current blade.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary replacement numbers: 942-04308, 942-04308A, 942-04312, 742-04308 and related variants.\u003c\/li\u003e\n  \u003cli\u003eOther cross-reference numbers in listings include 942-0656 and 742-0656.\u003c\/li\u003e\n  \u003cli\u003eIf your current blade uses an S-shaped or 5-star hole, specific alternate MPNs are suggested—verify before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and lawn-care professionals who maintain 42\" decks and need a balanced, mulching-capable blade set that fits a wide range of tractors and zero-turn mowers. Ideal for users replacing worn or damaged blades who require OEM-style dimensions and a 3-in-1 blade for flexible mowing modes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit my Cub Cadet XT1 42\"?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your XT1 uses a 6-point star center hole and the blade dimensions match the listed specs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many blades are included in one purchase?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each package contains two 42\" mulching blades, enough to renew a standard 42\" deck pair.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199828021432,"sku":"B0B12GF4W1","price":79.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-42-inch-blades.jpg?v=1790600895"},{"product_id":"ilonpa-5-8-x-120-5-aramid-deck-belt-for-john-deere-54-decks-direct-fit-m154960-m143923-high-tensile-strength","title":"ILONPA 5\/8\" x 120.5\" Aramid Deck Belt for John Deere 54\" Decks — Direct Fit M154960 M143923, High Tensile Strength","description":"\u003cp\u003e\u003cb\u003eILONPA 5\/8\" x 120.5\" aramid cord deck belt designed to replace John Deere M154960, M143923 and compatible Scag\/Scotts belts for 54\" mower decks.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eReplacing a worn mower deck belt restores cutting performance and keeps deck pulleys turning smoothly. This ILONPA deck belt is built with aramid cord for enhanced tensile strength and abrasion resistance while matching the critical 5\/8\" width and 120.5\" length used on many John Deere, Scotts and Scag 54\" decks. It offers a direct-fit replacement for specified OEM numbers so you can spend less time troubleshooting fitment and more time mowing.\u003c\/p\u003e\n\n\u003ch3\u003eWill this belt fit my John Deere X340 or X520 with a 54\" deck?\u003c\/h3\u003e\n\u003cp\u003eYes — the belt is made to match the same belt profile and dimensions used on multiple John Deere models equipped with 54\" decks. Confirm your deck width and compare part numbers to ensure an exact replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact width: 5\/8\" (0.625 in)\u003c\/li\u003e\n  \u003cli\u003eExact length: 120.5\" total circumference\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for John Deere M154960 and M143923\u003c\/li\u003e\n  \u003cli\u003eFits models: X320, X340, X500, X520, X534, X540 and related GX\/LX series with 54\" decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aramid cord construction help me in the yard?\u003c\/h3\u003e\n\u003cp\u003eAramid fibers provide superior tensile strength and resistance to stretch compared with standard polyester belts, which helps maintain consistent deck speed and blade engagement over time. This material choice reduces the frequency of belt adjustments or early replacements caused by elongation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh tensile strength for reduced stretch\u003c\/li\u003e\n  \u003cli\u003eGood abrasion resistance against pulleys and debris\u003c\/li\u003e\n  \u003cli\u003eStable performance under normal mowing loads\u003c\/li\u003e\n  \u003cli\u003eGray belt color for easy visual inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OEM and manufacturer part numbers does this belt replace?\u003c\/h3\u003e\n\u003cp\u003eThis ILONPA belt is specified to interchange with several common OEM identifiers used by John Deere, Scag and Scotts, simplifying part selection for many 54\" decks. Always cross-check your current belt number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJohn Deere: M154960 and M143923\u003c\/li\u003e\n  \u003cli\u003eOther references: 382082\u003c\/li\u003e\n  \u003cli\u003eScag replacements: 482139 and 482281\u003c\/li\u003e\n  \u003cli\u003eScotts compatibility: S2554 and several early 2000s models (1999–2001) with 54\" decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this replacement belt?\u003c\/h3\u003e\n\u003cp\u003eVerify deck width, pulley alignment and the belt path in your mower’s manual to ensure correct routing. Inspect pulleys, idlers and spindle bearings for wear—replacing a belt on worn hardware can shorten belt life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm 54\" deck and 5\/8\" belt width match\u003c\/li\u003e\n  \u003cli\u003eCompare existing belt length to 120.5\" circumference\u003c\/li\u003e\n  \u003cli\u003eLook for damaged pulleys or seized idlers before installation\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer routing diagrams for proper tension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Homeowners, landscapers and equipment technicians who need a reliable, direct-fit deck belt for 54\" mower decks on select John Deere, Scag and Scotts machines. If you want a replacement that matches OEM dimensions and benefits from aramid cord strength, this belt is a practical option for regular mowing duties and routine maintenance cycles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt fit John Deere M154960?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ILONPA belt is a direct replacement for John Deere M154960 and M143923 on 54\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the belt made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt uses aramid cord reinforcement for higher tensile strength and reduced stretch.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199830610104,"sku":"B07V35M173","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-deck-belt-front-view.jpg?v=1790600984"},{"product_id":"ilonpa-942-05052a-high-lift-mower-blades-50-inch-3-pack-for-cub-cadet-and-mtd-medium-high-lift","title":"ILONPA 942-05052A high-lift mower blades 50-inch 3-pack for Cub Cadet and MTD — medium\/high lift","description":"\u003cp\u003e\u003cstrong\u003eThese ILONPA 942-05052A high-lift replacement mower blades are a 3-piece set designed to restore lift and clean cuts on 50\" and 34\" decks compatible with many Cub Cadet, Troy-Bilt, MTD\/Craftsman and RZT models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lawn mower is leaving clippings behind, spiking unevenly, or the deck airflow feels weak, worn blades are often the cause. This ILONPA set replaces OEM part numbers including 942-05052A and similar references, offering the 6-point star center hole and medium\/high-lift profile that matches many pre-2020 and current 50\" decks. The blades arrive painted on the cutting edge to prevent surface rust and to protect installers during handling; the paint wears off quickly once the blades are in regular use.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines are these blades compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese blades fit a wide range of lawn tractors and zero-turn mowers from Cub Cadet, Troy-Bilt, MTD\/Craftsman, Yard Machines and Columbia with 50\" or 34\" decks. They are supplied with the 6-point star center hole which matches many pre-2020 models and specific Enduro\/Ultima\/RZT series decks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet: XT1\/XT2 ZT1\/ZT2 RZT series and GT\/LT\/LX models listed in product details.\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt: Super Bronco 50 series, Mustang XP 50, TB2350.\u003c\/li\u003e\n  \u003cli\u003eMTD\/Craftsman and others: select G-series, Z-series and RZT\/Columbia models noted above.\u003c\/li\u003e\n  \u003cli\u003eDeck sizes: primarily 50\"; also compatible variants for 34\" decks where specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these 2-in-1 high-lift blades affect cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe 2-in-1 medium\/high-lift design raises grass slightly before the cut, creating improved airflow under the deck and helping deliver a uniform finish. They are well-suited for regular lawn maintenance on fine to medium grasses and for homeowners who want a tidy, striped appearance without extreme discharge or bagging demands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLift profile: medium\/high — balances suction and discharge.\u003c\/li\u003e\n  \u003cli\u003eResult: cleaner, more consistent cut and better bagging efficiency on compatible decks.\u003c\/li\u003e\n  \u003cli\u003eBest for: routine mowing rather than heavy mulching or very tall, wet turf.\u003c\/li\u003e\n  \u003cli\u003ePack: three blades to service a standard 3-blade 50\" deck in one purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact blade specifications and installation notes?\u003c\/h3\u003e\n\u003cp\u003eEach blade measures about 17 1\/14\" long, 2 3\/8\" wide and 0.157\" thick with a 1\" center hole in the 6-point star pattern. The air lift height is 1-1\/6\", and you receive three matching blades to replace all positions on most 50\" decks that use three blades. Pay close attention to your mower’s center hole type: if your blade has an S-shaped center hole, a different replacement part is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 17 1\/14\"; Width: 2 3\/8\"; Thickness: 0.157\".\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 6-point star, 1\" diameter — compatible with many pre-2020 models.\u003c\/li\u003e\n  \u003cli\u003eAir lift: 1-1\/6\"; Type: 2-in-1 high\/medium lift.\u003c\/li\u003e\n  \u003cli\u003ePackage: three blades; cutting edges painted to prevent corrosion and protect installers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I avoid ordering the wrong blade type?\u003c\/h3\u003e\n\u003cp\u003eBlade center hole designs vary across model years and series. This ILONPA set uses the 6-star center hole; some machines require the S-shaped center instead. Inspect your existing blade’s center hole and compare with the measurements and pattern listed here before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIf your blade has a 6-point star center, this ILONPA model is a likely match.\u003c\/li\u003e\n  \u003cli\u003eS-shaped center holes need part MPN 742P05094\/742-05094, not this set.\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, remove one old blade and compare dimensions and hole pattern to the specifications above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Homeowners and lawn-care pros who use Cub Cadet, Troy-Bilt, MTD\/Craftsman or compatible RZT\/GT\/LX\/XT series machines with 50\" (or select 34\") decks and who want a reliable three-blade replacement that restores lift, improves bagging and evens out cut quality. Choose this ILONPA 942-05052A set when your mower needs the 6-star center hole pattern and a medium\/high lift profile for everyday lawn upkeep.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit my Cub Cadet XT1 50\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your XT1 uses a 6-point star center hole and a 50\" deck; check the blade hole shape before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the painted cutting edge affect cutting performance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—the protective paint prevents rust and will wear off quickly during normal use without affecting cutting quality.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199882154168,"sku":"B09Z2BWYST","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-3pack-blades.jpg?v=1790601513"},{"product_id":"ilonpa-high-lift-mower-blades-50-deck-6-pack-2-in-1-lift-6-point-star-fit","title":"ILONPA High-Lift Mower Blades 50\" Deck 6-Pack — 2-in-1 Lift, 6-Point Star Fit","description":"\u003cp\u003e\u003cstrong\u003eILONPA 942-05052A high-lift replacement blades are a 6-piece set designed to restore clean lift-and-cut performance on 50\" and select 34\" lawn mower decks compatible with Cub Cadet, Troy-Bilt, MTD\/Craftsman and similar models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower is leaving uneven clippings, ragged edges, or reduced bagging power, worn or wrong blades are often the cause. These ILONPA blades are the 2-in-1 (standard\/medium) high-lift style that gently lifts grass into the cutting plane for a cleaner, more uniform cut and better discharge or bagging. They replace OEM part numbers in the 942\/742-05052 family and come as a six-blade pack so you can service an entire 50\" deck at once.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mowers will these ILONPA blades fit?\u003c\/h3\u003e\n\u003cp\u003eThese blades are compatible with a wide range of 50\" Cub Cadet deck models and several other brands using the same 6-point star center hole pattern. They suit many XT1\/XT2, ZT1\/ZT2, RZT and GT series models as well as select Troy-Bilt, MTD\/Craftsman and Yard Machines machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet: XT1\/XT2 Enduro and ZT1\/ZT2 Ultima 50\" decks (examples: XT1-GT50, ZT1-50)\u003c\/li\u003e\n  \u003cli\u003eAlso fits: RZT, GT, LT, LX 50\" series and some 34\" RZT models\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt, MTD\/Craftsman, Yard Machines and Columbia machines listed in the product compatibility\u003c\/li\u003e\n  \u003cli\u003eNote: these blades use a 6-point star center; pre-2020 models typically need this type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these 2-in-1 high-lift blades change cutting results?\u003c\/h3\u003e\n\u003cp\u003eThe slightly curved profile lifts clippings into the blade’s cutting path, improving evenness and bagging compared with flat or low-lift designs. That airflow helps stand grass up for a cleaner shear and reduces scattering of clippings, especially on fine turf.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift shape improves bagging and chute flow\u003c\/li\u003e\n  \u003cli\u003eCurved edge produces a cleaner, more uniform cut\u003c\/li\u003e\n  \u003cli\u003eWorks well for regular lawn maintenance on fine grasses\u003c\/li\u003e\n  \u003cli\u003ePainted cutting edges prevent rust and protect installers during handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact specifications and hardware details?\u003c\/h3\u003e\n\u003cp\u003eThese blades are manufactured to match the physical dimensions and mounting pattern found on many OEM 50\" decks. They are heavy enough for durable cutting yet sized to fit the 6-point star center of compatible spindles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 6 blades per package\u003c\/li\u003e\n  \u003cli\u003eLength: 17 1\/14\"; Width: 2 3\/8\"; Thickness: 0.157\"\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 6-point star (1\" center diameter); air lift: 1-1\/6\"\u003c\/li\u003e\n  \u003cli\u003eType: 2-in-1 \/ medium-lift blade for 50\" (and some 34\") decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I avoid ordering the wrong blade type for my mower?\u003c\/h3\u003e\n\u003cp\u003eMany manufacturers used two center-hole styles: the 6-star and an S-bolt (S-shaped) hole. Confirm the center hole shape and your mower’s model year before buying; ILONPA supplies the 6-star style used on most pre-2020 50\" decks, while S-hole users need the alternate MPN listed by the manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your blade’s center hole: 6-star versus S-shaped\u003c\/li\u003e\n  \u003cli\u003eIf your blade has an S-shaped hole, order the MPN 742P05094\/742-05094 instead\u003c\/li\u003e\n  \u003cli\u003eInspect blade length and lift height against listed specs before installation\u003c\/li\u003e\n  \u003cli\u003ePaint on cutting edges is normal — it will wear off in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: These ILONPA 942-05052A blades are aimed at homeowners, landscapers, and small-property owners who run Cub Cadet 50\" decks or compatible mowers and want a reliable 6-blade service kit. If you need full-deck replacements that improve bagging and leave a tidy finish without changing deck geometry, this six-pack is a practical, economical choice. Confirm your mower’s center hole type and dimensions before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit my Cub Cadet 50\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Cub Cadet XT1\/XT2 and ZT1\/ZT2 50\" decks that use a 6-point star center hole; confirm your blade’s center hole shape and dimensions first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Why are the cutting edges painted?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Edges are painted to prevent rust during storage and to protect installers; the paint wears off quickly during initial use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199882285240,"sku":"B0CP5K8Z58","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-50-inch-high-lift-blade.jpg?v=1790601510"},{"product_id":"ilonpa-48-7-star-mulching-blades-for-john-deere-100-series-2-pack-3-in-1-mulch-bag-side-discharge","title":"ILONPA 48\" 7-Star Mulching Blades for John Deere 100 Series — 2-Pack, 3-in-1 Mulch\/Bag\/Side Discharge","description":"\u003cp\u003e\u003cstrong\u003eILONPA GY20852 are 48-inch, 7-point star center mulching replacement blades engineered to restore cutting performance on compatible John Deere residential tractors and EZtrak zero-turn mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace worn or damaged blades with this 2-pack of ILONPA 3-in-1 mulching blades designed for many John Deere 100 Series 48\" decks and select EZtrak models. These blades use a 7-star center hole and a curved profile that supports mulching, side discharge, and bagging functions—bringing back a clean cut and consistent clippings management so your deck performs as intended.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blades improve mowing results?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA 3-in-1 blades are shaped to lift, recirculate, and repeatedly shear grass clippings for finer mulch and more uniform discharge. Their profile increases airflow under the deck, which helps maintain even cutting height and reduces uneven clumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCurved cutting edge for repeated clipping and finer mulching\u003c\/li\u003e\n  \u003cli\u003eRaised air lift that stabilizes deck airflow\u003c\/li\u003e\n  \u003cli\u003ePainted edges to protect installer and prevent pre-installation rust\u003c\/li\u003e\n  \u003cli\u003e3-in-1 design supports bagging, side discharge, and mulching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these blades fit my John Deere or EZtrak mower?\u003c\/h3\u003e\n\u003cp\u003eThese are 7-star center hole blades sized for 48\" decks on many John Deere 100 Series tractors and selected EZtrak residential zero-turn models. Confirm your mower uses a 7-point star center hole—if it uses a circle center hole, order a different MPN such as M145476.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with John Deere models like D140, E160, LA145, 155C and many X\/L series listed\u003c\/li\u003e\n  \u003cli\u003eFits EZtrak models including Z245, Z255, Z355E\u003c\/li\u003e\n  \u003cli\u003eCheck center hole: 7-point star, 7\/8\" (22.2mm) diameter\u003c\/li\u003e\n  \u003cli\u003eBlade length 17\" (432mm), width 2-5\/8\" (67mm), thickness 1\/6\" (4mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and how durable are the blades?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a two-pack (note: product spec text mentions package includes 3 pieces; please verify listing details before ordering). The blades are made to OEM-like dimensions and are coated at the edges to resist corrosion in storage and to protect during handling. The paint on the cutting edge is a temporary safety\/rust-prevention coating and will wear off after normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement numbers referenced: GY20852, GX21784, GX21785, GX21786, AM137757, AM141035\u003c\/li\u003e\n  \u003cli\u003eEdge coating prevents surface rust and protects installer from sharp edges\u003c\/li\u003e\n  \u003cli\u003eStandard thickness and length for 48\" decks ensures fit and strength\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated sharpening and seasonal reuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain ILONPA mulching blades?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows your mower manufacturer’s blade-removal and torque instructions—always disconnect the spark plug and wear gloves. After installation, run the deck briefly to seat the paint and check for any vibration; balance or re-torque if necessary. Periodic sharpening and debris cleaning will keep cut quality high.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect spark plug and secure mower before blade work\u003c\/li\u003e\n  \u003cli\u003eUse correct blade orientation and manufacturer torque specs\u003c\/li\u003e\n  \u003cli\u003eRun short break-in mow to remove protective edge paint\u003c\/li\u003e\n  \u003cli\u003eSharpen when cutting performance declines; inspect for bends or cracks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners and property caretakers who own John Deere 48\" decks or compatible EZtrak zero-turn mowers and need OEM-style 3-in-1 replacement blades will benefit from the ILONPA GY20852 set. It is aimed at users who want reliable fitment, improved mulching and flexible clippings handling without changing their existing deck setup. Always confirm your mower’s center hole type and deck size before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades fit all John Deere 48\" decks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many John Deere 48\" 100 Series and listed models but require a 7-star center hole. Verify your mower’s hole type before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the edge paint permanent?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the protective edge paint prevents rust and handling cuts and will wear off quickly during normal mowing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199905190072,"sku":"B09Z2V1VBX","price":87.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-48in-blades.jpg?v=1790602461"},{"product_id":"ilonpa-42-3-in-1-mulching-blades-for-john-deere-l100-l118-2-pack-direct-fit-hardened-steel","title":"ILONPA 42\" 3-in-1 Mulching Blades for John Deere L100-L118 — 2-Pack Direct-Fit Hardened Steel","description":"\u003cstrong\u003eThese ILONPA 42-inch 3-in-1 mulching blades are direct-fit replacement mower blades engineered to restore cutting performance on compatible John Deere L100–L118 and related 42\" decks.\u003c\/strong\u003e\n\n\u003cp\u003eIf your lawn tractor’s cut quality has dropped or the original blades are worn, the ILONPA GX20249\/GX20433 two-pack gives you balanced, durable replacement blades sized and drilled for direct installation on many John Deere and Scotts 42\" decks. Built from hardened steel with a protective painted edge and an air-lift profile, these blades are designed for chopping clippings finely, side-discharge, bagging, or mulching depending on your deck setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these blades match my John Deere model?\u003c\/h3\u003e\n\u003cp\u003eILONPA blades are manufactured to the same mounting pattern and overall dimensions used by the listed OEM numbers, so they bolt into place on compatible decks without modification. Confirm the center hole diameter and air-lift height against your existing blade before ordering to ensure a perfect fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces GX20433, GX20249, GY20567, 490-110-0029, 490-110-0046\u003c\/li\u003e\n  \u003cli\u003eCompatible models: L111, L100, L105, L107, L108, L110, L118\u003c\/li\u003e\n  \u003cli\u003eAlso fits select John Deere\/Scotts 42\" Sabre decks and L17.542\/L1742 models\u003c\/li\u003e\n  \u003cli\u003eCenter hole size 17.2mm and 1\" (24mm) air lift for deck clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and construction details?\u003c\/h3\u003e\n\u003cp\u003eEach blade measures 21-3\/8\" long with a reinforced 4mm thickness to resist bending and improve edge life. The 3-in-1 cutting profile supports mulching, side-discharge and bagging operations, while the painted cutting edge prevents shipping corrosion and protects hands during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 21-3\/8\" (543 mm); Width: 62.5 mm; Thickness: 4 mm\u003c\/li\u003e\n  \u003cli\u003eType: 3-in-1 mulching blade for 42\" decks; pack of two\u003c\/li\u003e\n  \u003cli\u003eCenter hole: circular 2\/3\" (17.2 mm); air lift: 1\" (24 mm)\u003c\/li\u003e\n  \u003cli\u003eHardened steel, painted cutting edge for rust protection and safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades affect cutting and mulching performance?\u003c\/h3\u003e\n\u003cp\u003eThe air-lift design helps keep clippings suspended long enough for repeated cutting strokes, producing finer clippings for better mulching and a cleaner bagging or discharge. Using matched blade pairs maintains deck balance, reduces vibration, and prolongs spindle and bearing life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFiner clippings for improved mulching when used with compatible decks\u003c\/li\u003e\n  \u003cli\u003eBalanced two-blade pack reduces vibration and wear on mower components\u003c\/li\u003e\n  \u003cli\u003ePainted edges remove quickly on first use — do not manually scrape off\u003c\/li\u003e\n  \u003cli\u003eDirect-fit mounting avoids drilling or blade modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners and small acreage owners with John Deere or compatible 42\" lawn tractor decks who need a reliable, OEM-pattern replacement blade set. Choose ILONPA GX20249\/GX20433 if you want a matched two-blade pack that restores cutting performance, supports mulching or bagging, and installs without alteration. If you are unsure about fit, compare your existing blade’s length, center hole diameter, and lift height to the specifications above or contact support for help during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my John Deere L111 tractor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they match OEM hole pattern and dimensions for L111 and other listed L100–L118 models. Verify your blade length and center hole size to be sure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove the painted edge before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The paint protects the edge during shipping and will wear off quickly during initial cutting; do not remove it manually.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199922622648,"sku":"B09Z2W2KL5","price":87.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-42-inch-blade.jpg?v=1790603193"},{"product_id":"ilonpa-42-mulching-mower-blades-for-john-deere-42-deck-7-point-star-fit-hardened-steel","title":"ILONPA 42\" Mulching Mower Blades for John Deere 42\" Deck — 7-Point Star Fit, Hardened Steel","description":"\u003cstrong\u003eThese ILONPA 42\" mulching mower blades are a direct-fit replacement set engineered to restore cutting performance for John Deere 42\" decks with a 7-point star center.\u003c\/strong\u003e\n\n\u003cp\u003eIf your riding mower’s 42-inch deck is leaving uneven clippings or struggling with thick grass, swapping to a matched set of blades can make a noticeable difference. This ILONPA blade set is designed to match OEM hole pattern and overall dimensions for many John Deere models so you can reinstall without modification. Constructed from hardened steel with a protective paint finish on the cutting edges, the blades balance durability and safety during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my John Deere mower?\u003c\/h3\u003e\n\u003cp\u003eThese blades fit a broad range of John Deere 42\" decks that use the 7-point star mounting. Confirm the blade length, width, thickness and center hole pattern on your machine before purchasing to avoid compatibility issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible reference numbers: GX22151, AM137328, AM137333, AM141033, GX21694, M149422, GY20850.\u003c\/li\u003e\n  \u003cli\u003eFitment includes many D, E, LA, LT, S, X and Z series models with 42\" deck size.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 21 1\/4\" length, 2 3\/4\" width, 0.157\" thickness with 7-point star center hole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades improve mulching and overall cut quality?\u003c\/h3\u003e\n\u003cp\u003eMulching blades are shaped to circulate clippings under the deck more efficiently, producing finer pieces that return nutrients to the turf. ILONPA’s profile and edge geometry help maintain a consistent airflow and cutting action across the full deck span.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCurved cutting profile promotes better clippings circulation for finer mulch.\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction retains a sharp edge longer for consistent results.\u003c\/li\u003e\n  \u003cli\u003ePainted edges reduce rust before first use and protect during handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward if the replacement blade matches your mower’s hole pattern and dimensions; follow your mower’s torque specs and safety steps. The edge paint is intended as a shipping and handling safeguard and will wear off during initial use—do not remove it with tools or chemicals beforehand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eObserve manufacturer torque and safety instructions when bolting blades in place.\u003c\/li\u003e\n  \u003cli\u003eEdge paint dissipates quickly during first cuts; the underlying steel is rust-resistant when installed properly.\u003c\/li\u003e\n  \u003cli\u003eRegularly inspect blades for nicks and balance; sharpen or replace in matched sets to maintain deck balance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these blades durable enough for heavy use?\u003c\/h3\u003e\n\u003cp\u003eILONPA blades are made from high-hardness steel for wear resistance and lasting sharpness under normal residential and light commercial mowing conditions. While no blade is indestructible, these are engineered to withstand typical impacts and abrasion better than untreated alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-hardness material improves edge life and wear resistance.\u003c\/li\u003e\n  \u003cli\u003ePainted edges protect against corrosion during storage and installation.\u003c\/li\u003e\n  \u003cli\u003eReplace blades in matched sets to avoid vibration and uneven wear on the deck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and small-property caretakers who own a John Deere riding mower with a 42\" deck and a 7-point star center hole pattern, and who want a cost-effective, durable replacement to restore mulching performance. This set is ideal if you need an OEM-compatible dimension match and value a blade profile optimized for finer clippings and longer edge life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these blades match OEM John Deere part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are designed to replace GX22151, AM137328, AM137333, AM141033, GX21694, M149422 and similar 7-point star 42\" blades.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I change all blades at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—replacing all deck blades together keeps balance and ensures even cutting and wear across the deck.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199925178552,"sku":"B09Z6HYQV5","price":87.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-42in-front-packaging.jpg?v=1790603292"},{"product_id":"ilonpa-1-2-x-162-aramid-cord-deck-belt-for-50-mower-decks-replaces-cub-cadet-954-04240-toro-86-1960-high-tensile-abrasion","title":"ILONPA 1\/2\" x 162\" Aramid Cord Deck Belt for 50\" Mower Decks — Replaces Cub Cadet 954-04240 \/ Toro 86-1960, High-Tensile Abrasion-","description":"\u003cp\u003e\u003cstrong\u003eILONPA 1\/2\" x 162\" (162-inch) Aramid cord deck belt replaces Cub Cadet 954-04240 \/ 754-04240 and Toro 86-1960 for 50\" mower decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement belt is built for mid-size riding mowers and yard tractors needing a dependable 50\" deck belt. Constructed with aramid cord reinforcement, the belt delivers high tensile strength and abrasion resistance without stretching out of spec. It suits multiple Cub Cadet, MTD, Craftsman and Toro models, making it a practical spare part when your mower’s cutting deck requires a reliable new belt.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models is this belt compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA belt replaces several OEM numbers used on 50\" decks. It fits Cub Cadet LTX1050 family machines and specific Craftsman\/MTD and Columbia models as listed by OEM part cross-references. Always verify your current part number or measure the belt before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Cub Cadet: 954-04240 and 754-04240 (50\" deck models like LTX1050, LTX1050KW\/KH exceptions noted)\u003c\/li\u003e\n  \u003cli\u003eFits Craftsman\/MTD yard tractors listed under PYT9000, 247.289810 and 247.289060\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with Columbia YT950KH and Toro part 86-1960\u003c\/li\u003e\n  \u003cli\u003eMeasures 1\/2\" width by 162\" circumference for 50\" decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aramid cord construction benefit my mower?\u003c\/h3\u003e\n\u003cp\u003eAramid fibers provide enhanced strength and resistance to heat and wear compared with standard rubber belts. That means longer life under load, fewer replacements, and more consistent deck engagement across seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh tensile strength prevents elongation under tension\u003c\/li\u003e\n  \u003cli\u003eImproved abrasion resistance reduces fraying and edge wear\u003c\/li\u003e\n  \u003cli\u003ePerforms reliably under typical lawn-mowing temperatures\u003c\/li\u003e\n  \u003cli\u003eGray color helps visually confirm correct belt routing and condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this belt?\u003c\/h3\u003e\n\u003cp\u003eConfirm the belt circumference, width and OEM part number on your old belt or in the tractor’s parts manual. Inspect pulleys and idlers for wear—damaged pulleys accelerate belt failure. Use correct tension and routing during installation to avoid slipping or premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure existing belt: 1\/2\" width and 162\" length required\u003c\/li\u003e\n  \u003cli\u003eCompare part numbers: 954-04240, 754-04240, 86-1960 or OEM cross-reference\u003c\/li\u003e\n  \u003cli\u003eCheck pulleys\/idlers and replace if grooved or rusted\u003c\/li\u003e\n  \u003cli\u003eFollow mower manual for routing and tensioning steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this belt restore deck performance immediately?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or stretched belt often returns deck speed and blade engagement to factory-like behavior. While a new belt resolves belt-related slipping and uneven cutting, proper blade sharpening and deck leveling are also important for optimal results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates slipping caused by glazed or stretched belts\u003c\/li\u003e\n  \u003cli\u003eRestores consistent blade RPM and cutting performance\u003c\/li\u003e\n  \u003cli\u003eWorks best when combined with clean pulleys and sharpened blades\u003c\/li\u003e\n  \u003cli\u003eSimple swap for experienced DIYers; consult a mechanic if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ILONPA’s 1\/2\" x 162\" deck belt is aimed at homeowners and lawn-care technicians who maintain 50\" deck Cub Cadet, MTD, Craftsman, Columbia and certain Toro yard tractors. If you need a durable, aramid-reinforced replacement for common OEM part numbers (954-04240, 754-04240, 86-1960) and want a belt designed to resist stretch and abrasion, this belt offers a direct, cost-effective solution. If your mower has different part numbers or a different deck size, confirm specifications before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt fit a Cub Cadet LTX1050?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It replaces Cub Cadet 954-04240 and fits LTX1050 series models, with noted exceptions—verify your model year and part number first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions and material?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 1\/2\" wide with a 162\" circumference and constructed with aramid cord for high tensile strength.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54199926948024,"sku":"B07TP27YC5","price":64.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-face-belt-packaging.jpg?v=1790603353"},{"product_id":"ilonpa-high-lift-mower-blades-6-piece-set-for-cub-cadet-50-decks-6-star-center-medium-lift-direct-fit-replacement","title":"ILONPA high-lift mower blades 6-piece set for Cub Cadet 50\" decks (6-star center) — medium-lift, direct-fit replacement","description":"\u003cp\u003e\u003cstrong\u003eThese are six ILONPA high-lift replacement mower blades (part 942-05052A) made for pre-2020 Cub Cadet 50\" decks and compatible models, designed to restore cutting performance and lift for cleaner bagging and mulching.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Cub Cadet XT1, XT2, ZT1, ZT2 or RZT 50\" mower uses the 6-point star center hole, this 6-piece blade set provides direct-fit replacements to bring back lift and consistent clipping discharge. Each blade matches the original medium-lift profile and dimensions so installation is straightforward; the set also fits select Troy-Bilt, MTD\/Craftsman and other 34\"\/50\" decks listed by manufacturers. Check your mower’s center hole type before ordering — these blades use the 6-star (not S-bolt) pattern common on pre-2020 models.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these blades affect cutting and bagging?\u003c\/h3\u003e\n\u003cp\u003eThese high-lift blades are shaped to create stronger airflow under the deck, which improves grass lift for an even cut and helps move clippings into a bagger or mulching chamber. Expect better collection and reduced clumping when blades are matched to the mower’s specification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift profile increases suction for cleaner bagging\u003c\/li\u003e\n  \u003cli\u003eConsistent blade geometry promotes uniform cutting height\u003c\/li\u003e\n  \u003cli\u003eReduces reintegration of clippings into the turf\u003c\/li\u003e\n  \u003cli\u003eSold as a 6-piece set for full-deck replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these blades fit my Cub Cadet or other brands?\u003c\/h3\u003e\n\u003cp\u003eThey are made to replace part numbers 942-05052A, 942-05052, 742-05052A and 742-05052 and fit many pre-2020 Cub Cadet 50\" models and several 34\" decks. Compatibility also extends to selected Troy-Bilt and MTD\/Craftsman machines listed by the manufacturer; verify center hole type and dimensions before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCenter hole: 6-point star (1\" diameter)\u003c\/li\u003e\n  \u003cli\u003eBlade length: 17 1\/14\"; width: 2 3\/8\"; thickness: 0.157\"\u003c\/li\u003e\n  \u003cli\u003eAir lift height: 1-1\/6\", medium-lift design\u003c\/li\u003e\n  \u003cli\u003eNot compatible with S-bolt center hole (use MPN 742P05094\/742-05094 for S-shaped holes)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these replacement blades?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard mower blade replacement steps: disconnect spark plug, elevate and secure the mower, remove old blades, and torque new blades to the manufacturer’s specification. Regular sharpening and balance checks extend blade life and ensure consistent performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways disconnect spark plug before work\u003c\/li\u003e\n  \u003cli\u003eInspect blade balance and sharpen when dull\u003c\/li\u003e\n  \u003cli\u003eReplace in matched sets for even deck operation\u003c\/li\u003e\n  \u003cli\u003eFollow Cub Cadet torque and safety recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I double-check before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm the model year and center hole type on your current blades: this ILONPA set is for 6-star center holes common on pre-2020 Cub Cadet 50\" decks. If your existing blade shows an S-shaped center hole, select the alternative S-bolt compatible part instead.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify part number compatibility (942-05052A, etc.)\u003c\/li\u003e\n  \u003cli\u003eMeasure blade dimensions against listed specs\u003c\/li\u003e\n  \u003cli\u003eConfirm deck size (50\" or compatible 34\")\u003c\/li\u003e\n  \u003cli\u003eCheck mower model and year for pre-2020 fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 6-pack suits owners of pre-2020 Cub Cadet XT1\/XT2, ZT1\/ZT2, RZT 50-series mowers and compatible Troy-Bilt or MTD\/Craftsman decks who need a direct-fit high-lift blade replacement. It’s ideal for homeowners who want renewed bagging and mulching performance without modifying the deck, and for technicians replacing all blades at once to maintain even cut quality.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades compatible with all Cub Cadet 50\" mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit pre-2020 Cub Cadet 50\" models that use a 6-point star center hole; not compatible with S-bolt (S-shaped) center holes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the blade dimensions and lift type?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each blade is 17 1\/14\" long, 2 3\/8\" wide, 0.157\" thick, with a 1-1\/6\" air lift and medium-lift profile.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54200454578360,"sku":"B09Z2J7CK1","price":117.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-6pcs-blade-set.jpg?v=1790614146"},{"product_id":"ilonpa-21-inch-mower-mulching-blades-black-21-deck-replacement-precision-ground-edge-airfoil-lift","title":"ILONPA 21-inch mower mulching blades — Black 21\" deck replacement, precision-ground edge \u0026 airfoil lift","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength 21-inch ILONPA mulching blade set designed to replace worn or damaged blades on many Cub Cadet, MTD, Troy-Bilt and Craftsman 21\" walk-behind decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese black, 21-inch mower blades are built as direct replacements for a wide range of part numbers used across popular push and self-propelled lawn mowers. They restore cutting performance and enable mulching or side-discharge depending on your deck setup. The blades accept the common mounting holes and fit 21\" cutting decks produced since the mid-1990s, matching dozens of model references from Cub Cadet, Troy-Bilt, MTD and Craftsman.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers do these blades replace?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA 21\" blades are compatible with numerous mowers and OEM part numbers often listed for 21-inch decks. They replace legacy and current part codes used by Cub Cadet, MTD, Troy-Bilt and Craftsman, making them a convenient universal swap for many machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replacements: 742-0741, 742-0741A, 942-0741, 942-0741A, 742-04276, 942-04276.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references: 490-100-C089, 490-100-M084, SPM209370365 and similar 21\" OEM codes.\u003c\/li\u003e\n  \u003cli\u003eFits models from brands including Cub Cadet CC989\/CC469 series, Troy-Bilt TB series, Craftsman M250\/M260 and many MTD-derived walk-behind mowers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these blades affect cutting and mulching performance?\u003c\/h3\u003e\n\u003cp\u003eThese replacement blades are shaped to promote lift and even clipping distribution for effective mulching on a 21\" deck. When installed correctly on compatible decks, they help produce a finer grass discharge suitable for mulching or even dispersal across the lawn, depending on deck configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision ground cutting edge for consistent grass shearing.\u003c\/li\u003e\n  \u003cli\u003eAirfoil profile improves grass lift and circulation inside the deck.\u003c\/li\u003e\n  \u003cli\u003eBlack finish resists surface corrosion for longer shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and fit checks should I perform before buying?\u003c\/h3\u003e\n\u003cp\u003eBefore purchase, verify your mower’s cutting deck size and the OEM blade part numbers listed in your owner’s manual. Confirm blade hole pattern and center-to-center spacing match the replacement; most 21\" blades share standard mounting layouts, but checking prevents fit issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure your deck width (should be 21\" nominal) and compare hole spacing.\u003c\/li\u003e\n  \u003cli\u003eMatch existing OEM numbers (e.g., 742-0741, 942-04276) to the replacement list.\u003c\/li\u003e\n  \u003cli\u003eInspect blade condition and replace in matched pairs to maintain balance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and maintenance steps are recommended after installing these blades?\u003c\/h3\u003e\n\u003cp\u003eAlways disconnect the spark plug and follow your mower manufacturer’s safety guidelines while replacing blades. After installation, check blade balance and torque hardware to the specified setting to prevent vibration and ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear gloves and safety glasses during removal\/installation.\u003c\/li\u003e\n  \u003cli\u003eUse a torque wrench and tighten to the mower manufacturer’s recommended torque.\u003c\/li\u003e\n  \u003cli\u003ePeriodically inspect edges and rebalance or replace if bent or nicked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners and small-property caretakers with 21\" walk-behind mowers who need a reliable, drop-in replacement blade set compatible with many Cub Cadet, Troy-Bilt, MTD and Craftsman models. These blades suit users looking to restore cutting performance or switch back to effective mulching on older or current 21\" decks without sourcing obsolete OEM parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my 21\" Cub Cadet mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Cub Cadet uses 21\" deck blades and lists a compatible part like 742-0741 or 942-04276, these ILONPA blades should fit. Verify hole pattern and deck size first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace these 21\" mower blades?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace when blades are bent, cracked, or excessively worn; for typical home use check and sharpen or replace annually.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54200500158648,"sku":"B0B2P36VJP","price":85.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-21-inch-blade-front-view.jpg?v=1790614740"},{"product_id":"ilonpa-42-notched-high-lift-mower-blades-3-pack-42in-oem-style-replacement-rust-resistant-edges","title":"ILONPA 42\" Notched High-Lift Mower Blades 3-Pack — 42in OEM-Style Replacement, Rust-Resistant Edges","description":"\u003cb\u003eThese ILONPA replacement blades are a three-piece set of notched high-lift 42\" mower blades engineered to fit Gravely and Ariens Zoom\/Zero-Turn 42\" decks as direct OEM-style replacements.\u003c\/b\u003e\n\n\u003cp\u003eIf your 42\" zero-turn deck needs fresh cutting edges, this ILONPA 3-pack gives you full-coverage replacement blades sized and punched to match popular Gravely and Ariens models. Each blade is designed for high-lift airflow to improve grass lift and bagging performance, and comes factory-painted on the edges to reduce surface rust and protect installers during handling. The set replaces part numbers 04265400 and 1134-9210-01, so it’s a simple swap for many standard 42\" mower spindles.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mowers will these blades fit?\u003c\/h3\u003e\n\u003cp\u003eThese blades are made for 42\" decks used on specific Gravely and Ariens zero-turn and Zoom models. They match the 5\/8\" center hole and the length, width and thickness used on many OEM blades so bolt-on installation is straightforward when the deck uses the listed patterns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGravely models covered include multiple 9151xx and 9152xx ZT 42 frames.\u003c\/li\u003e\n  \u003cli\u003eAriens Zoom\/Zero-Turn models listed such as 915159, 915161 and 915323.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers 04265400 and 1134-9210-01 for 42\" decks.\u003c\/li\u003e\n  \u003cli\u003eConfirm your deck uses a 5\/8\" center hole and similar blade dimensions before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these notched high-lift blades affect cutting performance?\u003c\/h3\u003e\n\u003cp\u003eNotched high-lift blades create more upward airflow beneath the deck, which helps lift grass for a cleaner cut and improves material discharge or bagging. The notches reduce weight and can help prevent clogging in heavier turf, while the high-lift shape boosts suction for even clippings distribution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-lift profile enhances grass stand-up for a uniform cut.\u003c\/li\u003e\n  \u003cli\u003eNotches reduce drag and minimize clogging in dense lawns.\u003c\/li\u003e\n  \u003cli\u003eBetter suction improves bagging and side-discharge efficiency.\u003c\/li\u003e\n  \u003cli\u003ePainted edges reduce rust and protect installers prior to break-in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact specifications and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eEach blade measures roughly 14 4\/5\" long, 2 1\/4\" wide and 0.197\" thick with a 5\/8\" center bore. The set includes three identical blades—enough for a typical 42\" three-blade deck. Installation follows standard blade replacement steps: secure the mower, remove old blades, align the center hole and bolt, torque to manufacturer specs, and check clearance before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 14.8\" | Width: 2.25\" | Thickness: 0.197\".\u003c\/li\u003e\n  \u003cli\u003eCenter hole diameter: 5\/8\" to match common spindle shafts.\u003c\/li\u003e\n  \u003cli\u003ePackage contains three blades for a full 42\" deck replacement.\u003c\/li\u003e\n  \u003cli\u003eAlways use correct bolt torque and safety procedures during install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs there anything special I should know about the paint on the cutting edge?\u003c\/h3\u003e\n\u003cp\u003eThe cutting edges are coated with protective paint to help prevent surface rust and to soften handling risk during installation. That coating is intentional and will wear away quickly once the blades start cutting; do not scrape it off before first use. This finish protects the blade during storage and transport and reduces the chance of accidental scratches during handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePainted cutting edges guard against corrosion during storage.\u003c\/li\u003e\n  \u003cli\u003eThe paint also reduces sharpness-related handling injuries before install.\u003c\/li\u003e\n  \u003cli\u003eExpect the coating to wear off naturally after initial mowing passes.\u003c\/li\u003e\n  \u003cli\u003eDo not forcefully remove the paint; it’s part of the product design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 3-pack is intended for owners and technicians of Gravely and Ariens 42\" zero-turn or Zoom decks who need a direct-fit, cost-effective blade replacement. It’s a strong choice for homeowners maintaining lawn appearance, landscapers who swap blades frequently, and fleet operators seeking consistent OEM-style dimensions without the premium OEM price—so long as your mower matches the listed models and spindle specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my 42\" Gravely mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Gravely model is listed (examples: 915148, 915150, 915170 series) and uses a 5\/8\" center hole, these blades will fit as direct replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I remove the paint from the cutting edges before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the paint protects against rust and handling; it will wear off naturally during normal mowing and shouldn’t be removed manually.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54202730381496,"sku":"B0B2PHBXSW","price":98.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-packaging-3pack.jpg?v=1790618419"},{"product_id":"ilonpa-mower-deck-belt-5-8-x-168-in-gray-aramid-reinforced-replacement-for-54-60-decks","title":"ILONPA mower deck belt 5\/8 x 168 in Gray — aramid-reinforced replacement for 54\"\/60\" decks","description":"\u003cp\u003e\u003cstrong\u003eILONPA 5\/8\" x 168\" aramid-reinforced mower deck belt engineered to replace Bad Boy 041-1650-00, Snapper Pro 5100893, and Woods 18990 for 54\"–60\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your zero-turn or rear-mount finish mower cutting cleanly with a heavy-duty replacement belt built to match OEM fitment across multiple Bad Boy, Snapper Pro and Woods models. This gray, 5\/8\" by 168\" belt uses aramid cord reinforcement for high tensile strength and long wear life, and it’s specified to fit a wide range of 54\" and 60\" mower decks plus compatible Snapper and Woods machines.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and deck sizes will this belt fit?\u003c\/h3\u003e\n\u003cp\u003eThis belt is designed for many Bad Boy 60\" decks (Pup, ZT, Avenger, Elite, CZT, Maverick and variants) and several 54\" Bad Boy decks (Outlaw family, Rebel, Rogue). It also fits Snapper Pro S200X 61\" decks and Woods P990\/RM990 rear-mount finish mowers. Check your original part number to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Bad Boy 041-1650-00 \/ 041165000\u003c\/li\u003e\n  \u003cli\u003eAlso replaces Snapper Pro 5100893 and Woods 18990\u003c\/li\u003e\n  \u003cli\u003eIntended for 54\" and 60\" deck configurations listed in product specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aramid cord construction benefit deck performance?\u003c\/h3\u003e\n\u003cp\u003eAramid fibers give the belt superior tensile strength and resistance to stretching under load, which helps maintain correct tension and blade engagement over time. That reduces slippage, extends service life, and preserves consistent deck speed during heavy mowing conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-tensile aramid cord resists elongation\u003c\/li\u003e\n  \u003cli\u003eImproves belt life compared with standard fabric cords\u003c\/li\u003e\n  \u003cli\u003eMaintains reliable power transfer to blades under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify this belt is the right replacement for my mower?\u003c\/h3\u003e\n\u003cp\u003eCompare the stamped or printed part number on your existing belt with the listed OEM numbers and measure the belt cross-section and outside length if unsure. Use your mower’s model and deck size (54\" or 60\") and year range against the compatibility list to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch part numbers: 041-1650-00, 041165000, 5100893, 18990\u003c\/li\u003e\n  \u003cli\u003eCheck belt size: 5\/8\" cross-section, 168\" outside length\u003c\/li\u003e\n  \u003cli\u003eVerify mower model and deck year ranges from product details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard deck belt replacement steps: relieve tension, route the belt around pulleys according to deck routing, then reapply tension and test blade engagement. Routine checks for wear, glazing or damage will help you know when replacement is needed again.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow manufacturer routing diagram for your deck\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys and spindles while replacing the belt\u003c\/li\u003e\n  \u003cli\u003eRe-tension and verify blades spin freely before mowing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA aramid-reinforced deck belt is aimed at owners, fleet managers, and repair technicians who need a robust OEM-compatible replacement for Bad Boy, Snapper Pro, or Woods decks. It suits anyone maintaining 54\"–61\" finishes or 60\" commercial-style decks who wants a durable belt that resists stretch and holds tension for consistent cutting performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this belt replace Bad Boy part 041-1650-00?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ILONPA belt is a direct replacement for Bad Boy 041-1650-00 (041165000).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the belt dimensions and material?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt is 5\/8\" cross-section by 168\" length and uses aramid cord reinforcement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54203585527992,"sku":"B07V2HBW9Y","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-coiled-belt.jpg?v=1790619045"},{"product_id":"ilonpa-54-high-lift-lawn-mower-blades-3-pack-54-inch-deck-6-point-star-5-8-mount-improved-bagging","title":"ILONPA 54\" High‑Lift Lawn Mower Blades — 3‑Pack 54-inch Deck, 6‑Point Star 5\/8\" Mount, Improved Bagging","description":"\u003cp\u003e\u003cstrong\u003eHigh‑lift 54-inch replacement mower blades from ILONPA designed to restore cutting power and reliable grass lift on compatible zero‑turn and garden tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ILONPA blades are engineered as direct-fit replacements for many Husqvarna, Poulan, and Craftsman 54\" decks, supplied as a set of three. Each blade is stamped and sized to match OEM center star pattern and 5\/8\" (16mm) mounting, with a 1\" air lift lip for improved clippings evacuation; thickness and dimensions follow common factory specs so installation is straightforward for owners familiar with deck service.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will these ILONPA blades fit?\u003c\/h3\u003e\n\u003cp\u003eThese blades cover a wide range of models from Husqvarna, Poulan, and Craftsman that use a 54\" deck and the 6‑point star mounting pattern. Check your mower's blade part numbers or measure the center hole and blade length to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM references: 187256, 532187256, 187254, 532187254, and related part numbers.\u003c\/li\u003e\n  \u003cli\u003eDesigned for Husqvarna series including Z254, MZ48, MZ54, RZ5424\/26, YTH24\/26V54, and similar 54\" decks.\u003c\/li\u003e\n  \u003cli\u003eAlso fits many Poulan and Craftsman 54\" models listed in the product details.\u003c\/li\u003e\n  \u003cli\u003eConfirm center hole: 6‑point star, 5\/8\" (16mm), blade length ~18.5\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do ILONPA high‑lift blades affect cut quality and bagging?\u003c\/h3\u003e\n\u003cp\u003eHigh‑lift blades are formed to pull grass upward into the deck’s airflow, which promotes a cleaner cut and stronger suction for bagging and side‑discharge performance. These ILONPA blades feature a raised air lift lip that enhances clippings lift without altering deck geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\" air lift guarantees stronger airflow for better mulch and bag collection.\u003c\/li\u003e\n  \u003cli\u003ePrecision length and tip profile help maintain an even deck balance.\u003c\/li\u003e\n  \u003cli\u003ePainted cutting edge prevents surface rust during storage and installation.\u003c\/li\u003e\n  \u003cli\u003eSet of three for full 54\" deck replacement ensures matched wear and balance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and installation notes?\u003c\/h3\u003e\n\u003cp\u003eEach blade measures roughly 18.5\" long, 3\" wide, and 0.157\" thick with the star center hole that matches many OEM spindles. The painted cutting edges are a protective coating applied for safe handling and corrosion resistance—this surface coating will wear off during initial use and should not be removed prior to operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlade length: 18.5\"; width: 3\"; thickness: 0.157\".\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 6‑point star, 5\/8\" (16mm); air lift: ~1\" (24.5mm).\u003c\/li\u003e\n  \u003cli\u003eType: 2‑in‑1 high‑lift design for discharge and bagging efficiency.\u003c\/li\u003e\n  \u003cli\u003ePackage: three matching blades; follow manufacturer torque specs for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any safety or maintenance tips I should follow?\u003c\/h3\u003e\n\u003cp\u003eAlways disconnect the spark plug and use appropriate blade removal tools and gloves when servicing the deck. Keep blades balanced and replace the full set at once to prevent vibration; inspect spindle hardware for wear and torque to factory specifications after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect ignition and wear cut‑resistant gloves during handling.\u003c\/li\u003e\n  \u003cli\u003eReplace all three blades simultaneously for balance and performance.\u003c\/li\u003e\n  \u003cli\u003eDo not pre‑sand or remove protective paint—this clears naturally in use.\u003c\/li\u003e\n  \u003cli\u003eSharpen when needed, keeping the original blade profile for lift characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: ILONPA 54\" high‑lift blades are intended for owners and service technicians of zero‑turn mowers and garden tractors with 54\" decks who need OEM‑style replacements. If your mower uses the listed part numbers or the 6‑point star 5\/8\" mount, and you want improved bagging or consistent cut quality, this three‑blade kit is a practical, cost‑effective option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these blades fit my Husqvarna Z254 with a 54\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your deck uses a 6‑point star 5\/8\" center and matches 54\" blade length, these blades are compatible with many Z254 family models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I replace all three blades at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Replacing all three preserves balance, reduces vibration, and ensures even cutting across the deck.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54203807531192,"sku":"B09Z62C1X3","price":90.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-packaged-blades.jpg?v=1790620225"},{"product_id":"ilonpa-5-8-x-176-deck-belt-gray-aramid-cord-reinforced-replacement-for-toro-ferris-husqvarna-exmark","title":"ILONPA 5\/8 x 176 Deck Belt - Gray Aramid Cord Reinforced Replacement for Toro\/Ferris\/Husqvarna\/Exmark","description":"\u003cp\u003e\u003cstrong\u003eA heavy-duty 5\/8\" x 176\" replacement deck belt from ILONPA engineered to fit multiple zero-turn and riding mower decks made with aramid cord for high tensile strength and long wear life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ILONPA deck belt is a direct-fit replacement designed to work with a wide range of commercial and residential mower models from Ferris, Toro, Husqvarna, Exmark and Scag. It matches several OEM part numbers, measures 5\/8\" in width and 176\" in circumference, and is finished in gray. Built with aramid cord reinforcement, this belt resists stretching and offers dependable power transfer for deck spindles and pulleys.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models and part numbers does this belt replace?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA 5\/8 x 176 belt cross-references many common OEM numbers so you can confirm compatibility quickly. It fits Titan and other Toro series, several Ferris ISZ zero-turn decks, Husqvarna PZ-series decks, select Exmark applications and Scag Tiger models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFerris \/ Simplicity: 5103871, 5022061, 5103391, 22061, 1522061\u003c\/li\u003e\n  \u003cli\u003eToro: 106-7369, 115-4971, 133-1167 (Titan ZX5400\/ZX5420\/ZX5450 and Z400 series references)\u003c\/li\u003e\n  \u003cli\u003eHusqvarna: 588264801, 575658403, 522829601 (PZ-series decks)\u003c\/li\u003e\n  \u003cli\u003eExmark \/ Scag cross-references: Exmark 109-8070 \/ 116-1965 \/ 135-5775, Scag 482652\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the belt’s construction affect performance and durability?\u003c\/h3\u003e\n\u003cp\u003eReinforcement with aramid cord improves tensile strength and reduces elongation compared with standard polyester belts. That leads to steady power transmission and fewer adjustments over the belt’s service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid cord: resists stretching and higher loads\u003c\/li\u003e\n  \u003cli\u003eGray compound: formulated for abrasion resistance on mower decks\u003c\/li\u003e\n  \u003cli\u003eUniform thickness and edge finish: smoother pulley engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat deck sizes and applications is this belt intended for?\u003c\/h3\u003e\n\u003cp\u003eThis belt is primarily used for cutting decks across various mower makes and sizes. It suits multiple deck widths and mounting configurations for both residential and commercial zero-turn mowers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToro Titan: ZX5400, ZX5420, ZX5450, MX5400, MX5480 (54\" deck series references)\u003c\/li\u003e\n  \u003cli\u003eFerris: ISZ zero-turns with 61\" deck; Scag Tiger Cub\/Wildcat 61\" decks\u003c\/li\u003e\n  \u003cli\u003eToro Z400\/Z441\/Z449\/Z450\/Z453: compatible with 48\" \u0026amp; 52\" deck setups where specified\u003c\/li\u003e\n  \u003cli\u003eHusqvarna: PZ series with 60\" deck where belt length and routing match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm fit and install the replacement belt?\u003c\/h3\u003e\n\u003cp\u003eConfirming compatibility requires matching the belt measurements and OEM cross numbers to your mower’s parts list or service manual. Installation typically follows the deck routing diagram; inspect pulleys and spindles for wear before fitting a new belt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure existing belt: 5\/8\" wide, 176\" circumference (approx.)\u003c\/li\u003e\n  \u003cli\u003eCompare OEM part numbers listed on your mower parts sticker or manual\u003c\/li\u003e\n  \u003cli\u003eInspect pulleys\/tensioners for damage and replace worn hardware\u003c\/li\u003e\n  \u003cli\u003eRoute belt per deck diagram and tension to manufacturer specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Landscapers, municipal crews, and homeowners who operate zero-turn or commercial-grade riding mowers and need a reliable, cross-referenced replacement belt. If you maintain Ferris, Toro, Husqvarna, Exmark or Scag decks and want an aramid-reinforced belt built for consistent belt life and stable deck performance, this ILONPA belt is tailored to those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this belt fit my Toro ZX5400 54\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this ILONPA 5\/8 x 176 belt cross-references Toro part numbers used on ZX5400 54\" deck models. Confirm by matching your mower’s parts list or current belt measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material is the belt reinforced with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The belt uses aramid cord reinforcement, chosen for high tensile strength and reduced stretch under load.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54203868184760,"sku":"B07V3L81ZV","price":94.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-deck-belt-front-profile.jpg?v=1790620662"},{"product_id":"ilonpa-46-inch-high-lift-mower-blades-2-pack-6-star-fit-for-cub-cadet-mtd-black","title":"ILONPA 46-inch High-Lift Mower Blades, 2-Pack — 6-Star Fit for Cub Cadet \u0026 MTD (Black)","description":"\u003cp\u003e\u003cstrong\u003eHigh-lift ILONPA 942-04244A replacement mower blades provide a 6-star center, high-lift profile, and precision dimensions to fit many 46-inch Cub Cadet, MTD and Troy-Bilt decks as a 2-pack replacement option.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese blades are engineered to match the 6-point star center hole and high-lift geometry used on a broad range of zero-turn and lawn-tractor 46\" decks (and some 42\" models). They are finished in black paint on the cutting edges to resist corrosion during storage and installation; that coating wears off quickly during normal use. Before ordering, verify your mower's center hole pattern (6-star vs S-bolt) to ensure correct fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWill these blades fit my Cub Cadet XT1, XT2, ZT1 or RZT 46\" deck?\u003c\/h3\u003e\n\n\u003cp\u003eThese blades are designed for Cub Cadet models that use the 6-star center hole on 46\" decks. They are compatible with many XT1\/XT2 and RZT series machines produced prior to 2022 that use the 6-point star mounting configuration.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible series include XT1, XT2, ZT1, ZT2 and RZT variations with 46\" decks (note: applies to units with 6-star center holes).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with S-bolt (S-shaped) center hole blades—check your spindle bolt pattern.\u003c\/li\u003e\n  \u003cli\u003eReplace part numbers 942-04244A, 742-04244, 742-04290, and related OEM variants when the center matches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact blade dimensions and key specifications?\u003c\/h3\u003e\n\n\u003cp\u003eThese are high-lift blades sized for 46\" cutting decks: length, width, thickness and air-lift measurements are provided so you can confirm fitment precisely. The blades use a 6-point star center hole and a high-lift profile to promote stronger suction for bagging and clean discharge.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOverall length: approximately 590 mm (23-2\/9\").\u003c\/li\u003e\n  \u003cli\u003eWidth: about 77 mm (3\"); thickness: ~3.2 mm (1\/8\").\u003c\/li\u003e\n  \u003cli\u003eAir lift (blade cup height): ~33 mm (1-2\/7\").\u003c\/li\u003e\n  \u003cli\u003eCenter hole type: 6-star (6-point star). Type: High-lift; designed for 46\" decks (and select 42\" models).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these blades differ from S-bolt style replacements?\u003c\/h3\u003e\n\n\u003cp\u003eThe key difference is the center hole pattern and how the blade fastens to the spindle. The ILONPA 942-04244A variants use a 6-star center; S-bolt blades use an S-shaped center hole. Using the wrong center style will prevent proper installation and may be unsafe.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6-star blades engage via a six-point star mounting pattern on the spindle hub.\u003c\/li\u003e\n  \u003cli\u003eS-bolt blades require a different S-shaped hub—do not interchange without checking.\u003c\/li\u003e\n  \u003cli\u003eIf your mower uses an S-shaped center, look for the specific S-bolt replacement part numbers instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This ILONPA high-lift blade 2-pack is aimed at owners of Cub Cadet, MTD or Troy-Bilt zero-turn mowers and lawn tractors that require 6-star center high-lift blades for 46\" decks. Choose these if your mower’s existing blades have the 6-point star center, you want a high-lift profile for improved bagging or discharge, and you prefer replacement blades finished to resist storage rust. If you’re unsure about your center hole type, remove one blade to inspect the hub or consult your mower’s manual before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these blades a 6-star or S-bolt style?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These ILONPA blades use a 6-point star center hole. They will not fit S-bolt (S-shaped) hub styles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm these blades fit my 46\" deck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure blade length and check your spindle hub for a 6-star pattern; compare to listed dimensions and compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54204001321144,"sku":"B09Z2LR9H5","price":90.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-packaging_deb2f87d-3cfa-44c9-bc33-27cd18a93002.jpg?v=1790622271"},{"product_id":"ilonpa-starter-for-kohler-7000-series-cub-cadet-mowers-12v-ccw-pmdd-10-tooth-direct-fit","title":"ILONPA Starter for Kohler 7000 Series \u0026 Cub Cadet Mowers — 12V CCW PMDD, 10‑Tooth Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eILONPA starter unit is a 12V, CCW-rotation PMDD replacement designed to fit Kohler 7000 Series engines and a wide range of Cub Cadet, Toro and New Holland lawn tractors and mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis direct-fit replacement starter (compatible with part numbers like 3209801, SAB0157, 410-21081 and others) delivers the correct 12V electrical spec, 10 teeth pinion and counterclockwise rotation required by many small engine models. It’s offered for homeowners and technicians who need a dependable, drop-in starter that matches OEM mounting and electrical connections for a large set of riding mowers and compact tractors.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this ILONPA starter work with?\u003c\/h3\u003e\n\u003cp\u003eThis starter is built to replace many OEM starters across brands: Cub Cadet Z-Force and RZT models, Kohler SV700 and SV800 series engines, Toro TimeCutter and Titan mowers, plus select New Holland compact tractors. The product listing includes exact model compatibility so you can cross-check before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet: i1046, i1050, RZT and Z-Force models (20–26 HP ranges)\u003c\/li\u003e\n  \u003cli\u003eKohler: SV710–SV740 and SV810–SV840 engine families\u003c\/li\u003e\n  \u003cli\u003eToro: TimeCutter Z5020\/Z5060, Titan Z4800\/Z5200 and multiple GT\/LX\/LX4xx models\u003c\/li\u003e\n  \u003cli\u003eNew Holland: G4030, G4035, G4050 compact tractors (2007–2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the electrical and mechanical specs match OEM requirements?\u003c\/h3\u003e\n\u003cp\u003eThis ILONPA unit meets the core specifications most OEM starters require: 12 volts, permanent magnet direct drive (PMDD) design, counterclockwise rotation and a 10-tooth pinion. Those characteristics ensure the starter meshes and spins the flywheel correctly when replacing specific part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 12V — compatible with standard small engine electrical systems\u003c\/li\u003e\n  \u003cli\u003eRotation: CCW — matches Kohler and many Cub Cadet starter orientations\u003c\/li\u003e\n  \u003cli\u003eTeeth: 10 — correct pinion tooth count for listed engines\u003c\/li\u003e\n  \u003cli\u003eStarter type: PMDD — compact, efficient drive suited for lawn engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and testing?\u003c\/h3\u003e\n\u003cp\u003eThe starter is designed for straightforward installation: the bolt pattern, electrical terminal placement and overall housing dimensions align with the listed OEM replacements. ILONPA units are tested for load and power; basic mechanical skills and standard hand tools let most users install this starter themselves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-in fit with OEM bolt pattern and terminals\u003c\/li\u003e\n  \u003cli\u003eComputerized load and power testing conducted before shipping\u003c\/li\u003e\n  \u003cli\u003eDIY-friendly instructions reduce installation time and service costs\u003c\/li\u003e\n  \u003cli\u003eCheck electrical connections and secure ground for reliable starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich original part numbers does this substitute replace?\u003c\/h3\u003e\n\u003cp\u003eOrder this ILONPA starter when replacing common OEM references to ensure compatibility instead of sourcing an exact OEM unit. The listing supplies many cross-reference numbers so you can match what’s currently fitted to your engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-replaces: 3209801, K0H3209801S, SAB0157, 32-098-01S\/03S\/04S series\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with reference numbers: 410-21081, 410-21069, 410-21100 and similar\u003c\/li\u003e\n  \u003cli\u003eUse the part numbers to confirm fitment against your mower’s service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This ILONPA starter is intended for homeowners, landscapers and repair shops maintaining Kohler-powered engines and a wide range of Cub Cadet, Toro and New Holland riding mowers and compact tractors. If you need a tested, OEM-cross-referenced 12V CCW PMDD starter with a 10-tooth pinion and straightforward installation, this unit is a practical replacement option. Always verify model year and part number compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter compatible with Kohler SV730 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ILONPA starter lists compatibility with Kohler SV710–SV740 series, including SV730, when you need a 12V CCW PMDD unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the starter require professional installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It’s designed as a drop-in replacement and can typically be installed with basic tools, though professional help is optional.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54205037969592,"sku":"B0BV27DMDT","price":118.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-starter-front-view.jpg?v=1790639178"},{"product_id":"ilonpa-replacement-spindle-assemblies-2-pack-for-42-mower-decks-fits-cub-cadet-xt1-xt2-4-bolt-mount-5-5-pulley","title":"ILONPA Replacement Spindle Assemblies 2-Pack for 42\" Mower Decks — Fits Cub Cadet XT1\/XT2, 4-Bolt Mount, 5.5\" Pulley","description":"\u003cp\u003e\u003cstrong\u003eReplacement spindle assemblies (2-pack) by ILONPA engineered to fit 42-inch mower decks for compatible Cub Cadet, MTD, Craftsman and Troy-Bilt models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese ILONPA spindle units are designed as direct-fit replacements for several OEM spindle part numbers (618-06976, 618-06976A, 918-06976, 918-06976A) and are supplied as a two-piece set with the mounting hardware included. Built for 42-inch decks, the spindles match common deck geometries and pulley sizes so you can restore blade performance and deck alignment without adapting your mower. Dimensions and key specs—6-3\/16\" overall height and 5-1\/2\" pulley outside diameter—are provided to help confirm compatibility before installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models will these spindles work with?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA 618-06976 \/ 918-06976 spindles are compatible with a range of Cub Cadet, MTD, Troy-Bilt and Craftsman lawn tractors and riding mowers that use a 42\" deck. They fit XT1 and XT2 Cub Cadet models listed under LT42\/LX42 variants, several Troy-Bilt Super Bronco and TB42 models, plus specific Craftsman T-series tractors and Columbia units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCub Cadet: XT1-LT42, XT1-LT42C, XT1-LT42EFI, XT1-LT42KH, XT2-LX42, XT2-LX42EFI, XT2-LX42KH\/ KW.\u003c\/li\u003e\n  \u003cli\u003eTroy-Bilt: Super Bronco and TB42\/TB1942 variants with 42\" decks.\u003c\/li\u003e\n  \u003cli\u003eCraftsman: T7800, T8000, T210 model families (years shown in compatibility list).\u003c\/li\u003e\n  \u003cli\u003eColumbia: CYT4220 and CYT4220SE (model years noted).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spindles measure up physically and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eEach spindle measures approximately 6-3\/16 inches (157.2 mm) in height from base to top and uses a 5-1\/2 inch (139.7 mm) outer-diameter pulley suited to many 42\" decks. The assembly is a heavy-duty 4-bolt design with a 6-point star mount pattern that aligns with original equipment bolt patterns. ILONPA supplies a complete installation kit so you get the fasteners needed for a quick replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall height: 6-3\/16\" (157.2 mm) to match deck spindle assemblies.\u003c\/li\u003e\n  \u003cli\u003ePulley outside diameter: 5-1\/2\" (139.7 mm) to fit standard belt routing.\u003c\/li\u003e\n  \u003cli\u003eMount: 4-bolt spindle with 6-point star pattern for secure seating.\u003c\/li\u003e\n  \u003cli\u003eIncludes: nuts, bolts and washers required for mounting (hardware kit supplied).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after installing these replacements?\u003c\/h3\u003e\n\u003cp\u003eInstalling new ILONPA spindles restores stable blade rotation and proper belt tracking, reducing vibration and uneven cutting. Because they are built to match OEM dimensions, you avoid modifications and spend less time troubleshooting alignment. The paired set is useful when both sides of a deck show wear so you get matched components for balanced performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced blade wobble and vibration for cleaner cuts.\u003c\/li\u003e\n  \u003cli\u003eImproved belt tension and routing stability.\u003c\/li\u003e\n  \u003cli\u003eMatched pair reduces uneven wear across the deck.\u003c\/li\u003e\n  \u003cli\u003eComplete hardware included for a one-stop replacement job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard spindle replacement steps but may require lifting the mower and removing the deck. Basic hand tools, replacement blades and a torque wrench are recommended. If your tractor model has the same bolt pattern and pulley diameter, the spindle bolts in without adapting the deck; always follow safety precautions when working under the deck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: wrenches, socket set, torque wrench, jack or lift for deck access.\u003c\/li\u003e\n  \u003cli\u003eTime: typical replacement for one spindle is about 45–90 minutes for a DIYer.\u003c\/li\u003e\n  \u003cli\u003eTip: replace blades and belts at the same time for best results.\u003c\/li\u003e\n  \u003cli\u003eSafety: disconnect spark plug and secure mower before beginning work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ILONPA 2-pack spindle assemblies are intended for owners and technicians of lawn tractors with 42-inch decks who need an OEM-style replacement for worn or damaged spindle units. If you own compatible Cub Cadet XT1\/XT2, MTD, Troy-Bilt Super Bronco\/TB42, Craftsman T-series, or Columbia CYT4220 models and want matched spindles with hardware for a straightforward swap, this kit provides a cost-effective, ready-to-install option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spindles replace part number 618-06976A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ILONPA spindles are designed to replace 618-06976, 618-06976A, 918-06976 and 918-06976A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bolts and washers included with the spindles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each 2-pack includes the necessary hardware kit for mounting both spindles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54205074931896,"sku":"B09NM4WG9M","price":133.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-spindle-front-assembly.jpg?v=1790639546"},{"product_id":"ilonpa-42-inch-deck-spindle-assembly-2-pack-direct-replacement-for-mtd-troy-bilt-4-bolt-with-hardware","title":"ILONPA 42-inch Deck Spindle Assembly 2-Pack - Direct Replacement for MTD\/Troy-Bilt, 4-Bolt with Hardware","description":"\u003cp\u003e\u003cstrong\u003eILONPA 2-pack 42-inch deck spindle assemblies provide ready-to-install, heavy-duty replacements engineered to match OE fit and restore cutting performance on compatible Troy-Bilt, MTD, Craftsman and Huskee 42\" decks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spindle assemblies are complete four-bolt units with a 6-point star mount, threaded holes and included hardware so you can swap them in without fabricating parts. Built to the same mounting dimensions as MTD\/Troy-Bilt 618-06991 and 918-06991, each spindle features a 174.2 mm (6-6\/7\") height and a 142 mm (5-4\/7\") pulley outer diameter to align with factory belts and blades. Use this pair to service both sides of a 42\" deck or keep a spare on hand for faster repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spindles fit my mower model?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to replace MTD\/Troy-Bilt part numbers 918-06991 and 618-06991 and are compatible with many Craftsman, Troy-Bilt and Huskee tractors that use a 42\" deck spindle. Confirm match by comparing spindle height, pulley OD and bolt pattern with your original unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for MTD 918-06991 \/ 618-06991 and Oregon 82-131\u003c\/li\u003e\n  \u003cli\u003eFits Craftsman T1000, T1200, T1300, T1400, T1800 models (select years listed)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Huskee LT4200 model years 2015–2017 and Troy-Bilt TB42, TB2246, Pony Bronco 42\" decks\u003c\/li\u003e\n  \u003cli\u003eSpindle height 174.2 mm, pulley OD 142 mm, 4-bolt pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic deck maintenance: lift the deck, remove belt and blade, unbolt the old spindle, and torque the new assembly into place. The spindles come with the necessary mounting bolts, washers and nuts to minimize downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll mounting hardware included for immediate installation\u003c\/li\u003e\n  \u003cli\u003eFour-bolt spindle with threaded holes for secure fit\u003c\/li\u003e\n  \u003cli\u003e6-point star mount aligns with factory blade carrier\u003c\/li\u003e\n  \u003cli\u003eNo machining or adapter plates required for listed models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build and dimensional details I should check?\u003c\/h3\u003e\n\u003cp\u003eKey dimensions mirror the original equipment to ensure belt alignment and blade height remain correct after replacement. Verify these specs before purchase to prevent fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpindle overall height: 174.2 mm (6-6\/7\")\u003c\/li\u003e\n  \u003cli\u003ePulley outer diameter: 142 mm (5-4\/7\")\u003c\/li\u003e\n  \u003cli\u003e4-bolt mounting pattern with 6-point star blade hub\u003c\/li\u003e\n  \u003cli\u003eDurable cast housing designed for lawn-mower duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these spindles affect deck performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn or damaged spindles restores blade stability, reduces vibration and ensures correct belt tracking—helping the deck cut evenly and prolonging belt and blade life. Using matched spindles on both sides keeps deck geometry consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces blade wobble and vibration for cleaner cuts\u003c\/li\u003e\n  \u003cli\u003ePreserves belt alignment to lower premature wear\u003c\/li\u003e\n  \u003cli\u003eSimplifies future maintenance with standard OE dimensions\u003c\/li\u003e\n  \u003cli\u003eTwo-pack lets you replace both spindles at once\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ILONPA 2-pack spindle assembly is intended for homeowners, landscapers and small-property maintenance pros who own compatible 42\" deck tractors from Craftsman, Troy-Bilt, MTD or Huskee and need a reliable, drop-in spindle replacement. Choose this set when your current spindle shows play, leaking grease, warped hubs, or damaged pulley surfaces and you want to restore deck alignment and cutting quality without custom modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which part numbers and mower models do these spindles replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They replace MTD\/Troy-Bilt 918-06991 and 618-06991 and fit many Craftsman T1000\/T1200\/T1300\/T1400\/T1800, Huskee LT4200, Troy-Bilt TB42\/TB2246 and Pony Bronco 42\" decks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include hardware for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each spindle comes with the required mounting bolts, washers and nuts so you can install them right out of the box.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":54205358538936,"sku":"B09NDGXXB3","price":135.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/ilonpa-front-view-packaging-spindle-assemblies.jpg?v=1790642388"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/ilonpa-front-view-packaging-spindle-assemblies.jpg?v=1790679866","url":"https:\/\/canadianlawn.ca\/collections\/ilonpa.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}