{"title":"Hooshing","description":"\u003cp\u003eBrowse 44 Hooshing products at Canadian Lawn, including hose connectors, splitters \u0026amp; fittings and grill replacement parts. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"hooshing-garden-hose-adapter-1-2-npt-male-x-3-4-ght-female-solid-brass-swivel-leak-resistant","title":"Hooshing Garden Hose Adapter 1\/2 NPT Male x 3\/4 GHT Female — Solid Brass Swivel, Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing's brass adapter converts a 1\/2\" NPT male thread to a 3\/4\" GHT female connection for secure, corrosion-resistant hose and deionized water system hookups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis solid brass garden hose adapter bridges common plumbing threads so you can attach a 3\/4\" garden hose to equipment or fittings with a 1\/2\" NPT male inlet. Made for outdoor use and water-treatment setups, the adapter resists corrosion, withstands pressure, and includes rubber gaskets for reliable sealing. Its swivel-style body eases alignment during installation and the precision-cut threads are manufactured to match standard garden faucets and hoses.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this adapter fit my existing hose and equipment?\u003c\/h3\u003e\n\u003cp\u003eThe adapter uses a 3\/4\" GHT (garden hose thread) female port and a nominal 1\/2\" NPT male thread on the opposite end. Check actual outer and inner diameters before ordering, since nominal pipe sizes don't always equate to outside measurements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" GHT female accepts standard garden hose male fittings.\u003c\/li\u003e\n  \u003cli\u003e1\/2\" NPT male mates to corresponding NPT female threads commonly found on water treatment components.\u003c\/li\u003e\n  \u003cli\u003eMale OD measured as 3\/4\" and female ID measured as 1\" for reference.\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets included to improve seal and reduce leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose brass for this connector instead of plastic or aluminum?\u003c\/h3\u003e\n\u003cp\u003eBrass is a preferred material for hose fittings because it combines strength with corrosion resistance, which extends service life outdoors and in water-treatment environments. It tolerates higher pressures and temperature swings better than many plastics, and won’t flake or oxidize like untreated metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body resists rust and mineral degradation.\u003c\/li\u003e\n  \u003cli\u003eMaintains structural integrity under repeated connections.\u003c\/li\u003e\n  \u003cli\u003eBetter long-term sealing performance with included rubber gaskets.\u003c\/li\u003e\n  \u003cli\u003eSuitable for garden, car washing, and deionized water setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will it leak under pressure?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: thread the male NPT into your port and push the garden hose fitting into the 3\/4\" GHT female end. The adapter features a swivel-style section to help align fittings while tightening, and rubber gaskets help ensure a watertight connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwivel design simplifies alignment during hookup (does not rotate when fully tightened).\u003c\/li\u003e\n  \u003cli\u003ePrecision-cut threads reduce cross-threading risk.\u003c\/li\u003e\n  \u003cli\u003eIncludes rubber sealing gaskets to minimize leaks at connection points.\u003c\/li\u003e\n  \u003cli\u003eRecommended to hand-tighten, then secure with a wrench if needed—avoid over-tightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat common uses and applications suit this adapter?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is versatile for garden, cleaning, and water-treatment tasks where you need to join garden hoses to equipment with NPT ports. It's a practical component in setups that require durable connections and reliable flow between hose lines and specialized devices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect garden hoses to deionized water system inlets or rinse stations.\u003c\/li\u003e\n  \u003cli\u003eAttach hoses for outdoor watering, pressure washing, or car cleaning.\u003c\/li\u003e\n  \u003cli\u003eUse for interior or exterior cleaning rigs that require robust fittings.\u003c\/li\u003e\n  \u003cli\u003eWorks well in temporary or permanent hose assemblies exposed to weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, hobbyists, and homeowners who need a durable, corrosion-resistant transition between garden hoses and NPT-threaded equipment will find this Hooshing brass adapter useful. It’s ideal for anyone assembling deionized water systems, garden irrigation connections, or heavy-use outdoor hose setups that demand long-lasting, leak-resistant fittings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter leak if used with a pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: When tightened properly and used with the included rubber gasket, it holds under typical garden-pressure conditions; avoid exceeding equipment pressure ratings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on both indoor and outdoor systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Solid brass resists corrosion outdoors and is compatible with indoor hose connections and many water-treatment setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192684073144,"sku":"B0FR4TJ6Z7","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-adapter-front-view.jpg?v=1790547934"},{"product_id":"hooshing-garden-hose-swivel-adapter-3-4-barb-to-3-4-ght-female-2-pack-solid-brass-with-clamps","title":"Hooshing Garden Hose Swivel Adapter 3\/4\" Barb to 3\/4\" GHT Female — 2-Pack Solid Brass with Clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Swivel Adapter converts a 3\/4\" inner-diameter hose to a standard 3\/4\" GHT female thread with solid-brass durability and included clamps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact hose adapters let you repair, extend, or convert garden hoses to fit faucets, sprinklers, timers, and spray nozzles that use a 3\/4\" GHT connection. Made from solid brass for corrosion resistance and long service life, the set includes gaskets and stainless-steel clamps to improve the seal and reduce leaks. Each kit contains two hex-shaped barb adaptors designed for quick, secure attachment to 3\/4\" ID hoses.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters attach to my hose and faucet?\u003c\/h3\u003e\n\u003cp\u003eThe adapter has a 3\/4\" barb to push inside hoses with a 3\/4\" inner diameter and a 3\/4\" GHT female threaded end to screw onto standard garden-faucet-style male threads. Installation is straightforward and requires only the included gasket and clamp for a water-tight connection. The hex shape provides grip for hand tightening or light wrench use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInsert the 3\/4\" barb fully into 3\/4\" ID hose (19mm OD).\u003c\/li\u003e\n  \u003cli\u003ePlace gasket inside threaded end for sealing.\u003c\/li\u003e\n  \u003cli\u003eSecure with supplied stainless-steel clamp and tighten.\u003c\/li\u003e\n  \u003cli\u003eScrew the 3\/4\" GHT female onto standard male garden threads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes solid brass a good choice for hose fittings?\u003c\/h3\u003e\n\u003cp\u003eSolid brass resists corrosion and withstands temperature changes better than many plated or plastic fittings. Brass fittings have low magnetic permeability and maintain structural integrity under repeated use, reducing the chance of cracks or breaks. That durability helps prevent leaks at connection points over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant metal for outdoor environments.\u003c\/li\u003e\n  \u003cli\u003eHigh temperature tolerance for seasonal use.\u003c\/li\u003e\n  \u003cli\u003eRobust mechanical strength for repeated connections.\u003c\/li\u003e\n  \u003cli\u003eLonger service life compared with plastic alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich watering tools and systems will these adapters work with?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/4\" GHT female thread is a common size across many hose-end devices, so these adapters pair with outdoor faucets, sprinklers, hose splitters, timers, filters, and spray nozzles that accept 3\/4\" garden threads. They are also suitable for emergency repairs or converting hose ends to match different equipment. Keep the hose ID compatibility in mind—these fit hoses with approximately 3\/4\" internal diameter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutdoor faucets and spigots using 3\/4\" male GHT.\u003c\/li\u003e\n  \u003cli\u003eSprinkler heads, timers, and filtration housings with female GHT connectors.\u003c\/li\u003e\n  \u003cli\u003eHose splitters and multi-outlet manifolds using standard garden threads.\u003c\/li\u003e\n  \u003cli\u003eQuick repair of torn or worn hose ends when paired with clamps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I ensure a leak-free seal after installation?\u003c\/h3\u003e\n\u003cp\u003eStart by confirming your hose inner diameter matches the 3\/4\" barb, then use the supplied gasket in the threaded end before tightening the clamp. Tighten the stainless-steel clamp firmly around the hose barb and check the hex portion for secure hand-tight engagement to the male thread. After installation, run water and inspect the joint; retighten the clamp or thread as needed for a snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify hose ID is approximately 3\/4\" (19mm OD indicated).\u003c\/li\u003e\n  \u003cli\u003eUse the included rubber gasket in the GHT female end.\u003c\/li\u003e\n  \u003cli\u003eTighten the stainless-steel clamp evenly around the barb.\u003c\/li\u003e\n  \u003cli\u003eTest with water and adjust if you notice any seepage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: gardeners, landscapers, DIY homeowners, and anyone who needs a reliable way to repair or adapt 3\/4\" garden hoses to standard 3\/4\" GHT-threaded equipment. The Hooshing adapters are practical for seasonal hose maintenance, small irrigation setups, or quick connection changes when mixing hose types and garden accessories. Because the pack includes two adapters, gaskets, and clamps, it suits both immediate repairs and spare parts storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these adapters fit my 3\/4\" garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these barbs fit hoses with a roughly 3\/4\" inner diameter (about 19mm OD). Confirm your hose ID before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps and gaskets included for a leak-free connection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each pack includes rubber gaskets and stainless-steel clamps to help secure and seal the hose connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192701145272,"sku":"B0D21N4QD1","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-brass-adapters.jpg?v=1790548561"},{"product_id":"hooshing-brass-garden-hose-adapter-3-4-npt-f-to-3-4-ght-f-solid-brass-rubber-gaskets","title":"Hooshing Brass Garden Hose Adapter 3\/4\" NPT F to 3\/4\" GHT F — Solid Brass, Rubber Gaskets","description":"\u003cp\u003e\u003cstrong\u003eHooshing's brass garden hose adapter converts a 3\/4\" NPT female thread to a 3\/4\" GHT female connection for reliable, corrosion-resistant water transfer in irrigation and deionized water systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact brass coupling is engineered to bridge thread standards—3\/4\" NPT female to 3\/4\" GHT female—so you can join garden hoses, faucets and water-treatment fittings without leaks or repeated replacements. Made from solid brass with precision-cut threads and included rubber gaskets, it’s built to withstand outdoor use, higher pressures, and routine handling. The swivel-friendly design eases alignment during installation and the nominal inside dimensions (~1\" I.D.) accommodate common garden and treatment system flows.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter improve hose-to-equipment connections?\u003c\/h3\u003e\n\u003cp\u003eThe adapter provides a standardized mating surface between NPT- and GHT-threaded parts, eliminating guesswork when pairing hoses and deionized water equipment. Precision threads and supplied rubber seals reduce the chance of drips and pressure loss. Because it’s brass, the fitting resists rust and holds up better than many plated or plastic alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" NPT female to 3\/4\" GHT female thread conversion for compatibility\u003c\/li\u003e\n  \u003cli\u003eIncluded rubber gaskets for improved sealing and fewer leaks\u003c\/li\u003e\n  \u003cli\u003eSolid brass construction for durability and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSwivel-friendly design to simplify alignment during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this adapter fit my existing garden hose or water-treatment ports?\u003c\/h3\u003e\n\u003cp\u003eIt fits devices and hoses using nominal 3\/4\" NPT or 3\/4\" GHT female threads, commonly found on garden faucets and many treatment-system ports. Note that “3\/4\"” refers to nominal pipe size—not exact internal diameter—so confirm your thread type before purchasing. If your equipment uses a different standard (e.g., BSPP or metric threads), an alternate adapter will be necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal 3\/4\" thread sizing—verify thread type (NPT vs GHT) before ordering\u003c\/li\u003e\n  \u003cli\u003eApproximately 1\" internal diameter for expected flow rates\u003c\/li\u003e\n  \u003cli\u003eNot compatible with non-NPT\/GHT standards without an additional converter\u003c\/li\u003e\n  \u003cli\u003eWorks with typical garden faucets, hoses, and many water-treatment fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: hand-start the threads, align, and tighten until snug—use the swivel feature to position hoses without stressing connections. The included rubber gaskets create a reliable seal; check them periodically for wear and replace if compressed or cracked. For long-term care, rinse and dry the adapter after exposure to harsh chemicals or mineral-heavy water to prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-thread then tighten; swivel helps align hoses before final tightening\u003c\/li\u003e\n  \u003cli\u003eInspect and replace rubber gaskets when worn for leak-free performance\u003c\/li\u003e\n  \u003cli\u003eRinse after exposure to chemicals or mineral deposits to prevent buildup\u003c\/li\u003e\n  \u003cli\u003eNo special tools required for typical installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does brass compare to other materials for outdoor fittings?\u003c\/h3\u003e\n\u003cp\u003eBrass balances strength and corrosion resistance better than plain steel or many plastics used in garden fittings. It tolerates repeated connection cycles and environmental exposure without flaking or rusting, which reduces replacement frequency. That makes brass a cost-effective choice where reliability and longevity matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuperior corrosion resistance versus steel and many metals\u003c\/li\u003e\n  \u003cli\u003eMore durable than common plastic alternatives under frequent use\u003c\/li\u003e\n  \u003cli\u003eHolds threads and seals securely over extended service life\u003c\/li\u003e\n  \u003cli\u003eSuitable for both outdoor garden use and many water-treatment applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 3\/4\" NPT F x 3\/4\" GHT F brass adapter is for homeowners, gardeners, and technicians who need a dependable thread converter between garden hoses and water-treatment or irrigation equipment. It’s particularly useful if you require a corrosion-resistant, reusable coupling that simplifies connections and reduces leaks without complex tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this adapter leakproofly connect NPT to GHT threads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: With its precision threads and included rubber gaskets it creates a reliable seal when properly tightened; inspect gaskets periodically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this adapter with pressure washers or treated water systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for many low- to medium-pressure systems and most deionized water setups—confirm thread type and pressure rating of your equipment first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192740860088,"sku":"B0F28LZZ38","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-adapter-front-view_c573dfdc-fb76-4b51-8a75-ac54656288e1.jpg?v=1790549503"},{"product_id":"hooshing-propane-adapter-1-4-npt-male-to-qcc1-type-1-brass-with-safety-cap-for-5-40-lb-tanks","title":"Hooshing Propane Adapter 1\/4\" NPT Male to QCC1\/Type 1 — Brass with Safety Cap for 5–40 lb Tanks","description":"\u003cb\u003eHooshing QCC1 Propane Gas Fitting Adapter converts a 1\/4\" NPT male pipe thread into a QCC1\/Type 1 connection for safe, durable hookup of regulators and hoses to 5–40 lb propane tanks.\u003c\/b\u003e\n\n\u003cp\u003eIf you need a compact, brass adaptor to bridge standard 1\/4\" NPT fittings and common QCC1\/Type 1 tank valves, this Hooshing adapter is designed for that job. It provides a solid metal connection with a built-in safety cap and is sized for typical small to medium propane cylinders used with grills, heaters, and camping stoves. Before installing, check thread compatibility and follow torque guidance to avoid leaks.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this adapter fit my existing regulator or hose?\u003c\/h3\u003e\n\u003cp\u003eThe adapter converts a 1\/4\" male NPT pipe thread into a QCC1\/Type 1 connection, letting you attach regulators or hoses that expect a Type 1 tank fitting. Measure the thread and verify your regulator has a 1\/4\" female NPT receiver before buying. The adapter’s dimensions and thread type make it suitable for many common propane setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts 1\/4\" male NPT to QCC1\/Type 1 for tank-to-regulator compatibility.\u003c\/li\u003e\n  \u003cli\u003eIntended for use with 5–40 lb (small to medium) propane cylinders.\u003c\/li\u003e\n  \u003cli\u003eThread size represented as 1\/4\" NPT — confirm with a caliper if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it durable and safe for repeated use?\u003c\/h3\u003e\n\u003cp\u003eConstructed of solid brass, this adapter resists corrosion and withstands repeated connections better than many plated or alloy fittings. It includes a safety-style plastic cap that will pop off if the valve is compromised, reducing unintended flow. Proper installation and thread sealing practices remain important to maintain leak-free service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for longevity and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eSafety plastic cap designed to limit flow if damaged.\u003c\/li\u003e\n  \u003cli\u003eRecommended secure installation to prevent leaks (use correct tools).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation tips help prevent leaks and ensure a tight connection?\u003c\/h3\u003e\n\u003cp\u003eStart by attaching the 1\/4\" NPT fitting to the adapter before connecting the assembly to the tank; this sequence helps minimize cross-threading and leaks. Use an 18 mm deep hex socket to remove the old fitting and install the new adapter cleanly if needed. Apply approved pipe thread sealant or PTFE tape suitable for propane on the male thread per manufacturer's guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSecure 1\/4\" NPT fitting to adapter first, then mate to the tank valve.\u003c\/li\u003e\n  \u003cli\u003eUse an 18 mm deep hex socket for removal\/installation when applicable.\u003c\/li\u003e\n  \u003cli\u003eUse proper propane-rated thread sealant or PTFE tape; test for leaks after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich appliances and scenarios is this adapter best for?\u003c\/h3\u003e\n\u003cp\u003eThis fitting is a practical addition when you need to adapt regulators, grills, portable heaters, or camping stoves to bottles with QCC1\/Type 1 valves. It’s targeted at DIYers, outdoor cooks, and maintenance pros who want a compact, metal adapter for occasional or regular hookups. Always inspect connections and test for leaks before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with propane regulators, grills, camping stoves, and portable heaters.\u003c\/li\u003e\n  \u003cli\u003eSuitable for 5–40 lb propane tank installations and quick conversions.\u003c\/li\u003e\n  \u003cli\u003eHandy for backyard, camping, and RV propane system adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing QCC1 Propane Gas Fitting Adapter is aimed at homeowners, outdoor enthusiasts, and technicians who need a reliable brass adapter to connect 1\/4\" NPT-threaded regulators or hoses to QCC1\/Type 1 propane tanks. If you routinely switch fittings between appliances and tanks or are converting older equipment to common Type 1 connections, this compact, serviceable adapter is a practical tool to keep in your kit. Always follow safety procedures for propane installations and perform a leak check after fitting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit my 1\/4\" NPT regulator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your regulator has a 1\/4\" female NPT port; verify threading and use approved sealant, then test for leaks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on large 100 lb propane tanks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it’s designed for 5–40 lb tanks and common QCC1\/Type 1 cylinder valves, not large bulk tanks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192789192888,"sku":"B07XQ7XKLZ","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-qcc1-adapter-front-view.jpg?v=1790550547"},{"product_id":"hooshing-garden-hose-adapter-1-4in-npt-female-3-4in-ght-female-solid-brass-gasket-sealed","title":"Hooshing Garden Hose Adapter 1\/4in NPT Female × 3\/4in GHT Female — Solid Brass, Gasket-Sealed","description":"\u003cp\u003e\u003cstrong\u003eHooshing's brass garden hose adapter converts a 3\/4\" GHT female hose connection to a 1\/4\" NPT female thread, providing a durable, leak-resistant link for water-treatment and general outdoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're plumbing a deionized water system, attaching a pressure gauge, or connecting specialty equipment, the right adapter keeps water flowing where it should. This solid-brass connector combines precision-machined threads, a swivel-friendly profile for easier alignment, and included rubber gaskets to improve sealing. It resists corrosion and holds up to outdoor conditions better than many plated or plastic alternatives.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter support water treatment setups?\u003c\/h3\u003e\n\u003cp\u003eThe adapter bridges standard garden hose fittings (3\/4\" GHT) to instruments or lines that use a 1\/4\" NPT female inlet, commonly found on filtration and deionized systems. Brass construction minimizes contamination risk from rust while maintaining a reliable mechanical connection. Its accuracy in thread cutting reduces cross-threading and helps maintain steady flow rates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts 3\/4\" GHT female to 1\/4\" NPT female for compatibility with many water-treatment devices\u003c\/li\u003e\n  \u003cli\u003eSolid brass alloy resists corrosion that could affect water purity\u003c\/li\u003e\n  \u003cli\u003ePrecision threads reduce leaks and ensure repeatable fittings\u003c\/li\u003e\n  \u003cli\u003eIncludes rubber gaskets to improve sealing under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my existing garden hose and equipment?\u003c\/h3\u003e\n\u003cp\u003eThe connector is designed to mate with standard 3\/4\" garden hose threads and 1\/4\" NPT threaded fittings. Thread sizes are nominal; measure your ports before ordering if you need an exact match. The adapter's I.D. measures approximately 1\" x 1\/2\", offering a common passage for many hobby and light-commercial uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" GHT female on one side for typical garden hoses and spigots\u003c\/li\u003e\n  \u003cli\u003e1\/4\" NPT female on the other side for gauges, valves, and DI equipment\u003c\/li\u003e\n  \u003cli\u003eCheck nominal vs. actual diameters if you have nonstandard hardware\u003c\/li\u003e\n  \u003cli\u003eSwivel-friendly design eases alignment before final tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is the brass construction?\u003c\/h3\u003e\n\u003cp\u003eBrass is a preferred material for outdoor water fittings because it resists rusting and weathers sunlight and moisture better than many metals. This connector is machined to maintain thread integrity under repeated install cycles and to stand up to typical garden and treatment pressures. Rubber gaskets included with the adapter add a secondary seal to prevent slow drips that wear seals over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for corrosion resistance and long service life\u003c\/li\u003e\n  \u003cli\u003ePrecision machining minimizes thread wear and leaks\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets enhance sealing, reducing maintenance needs\u003c\/li\u003e\n  \u003cli\u003eSuitable for outdoor use and repeated connects\/disconnects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and use on busy projects?\u003c\/h3\u003e\n\u003cp\u003eThe fitting's swivel-friendly section helps you align and hand-start threads easily, which speeds up hookups when space is tight. It doesn't rotate once fully tightened, so the joint stays secure under pressure. For best results, hand-tighten to align, then finish with a short quarter-turn using pliers if necessary—avoid over-tightening to protect gaskets and threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwivel-friendly for easier alignment during installation\u003c\/li\u003e\n  \u003cli\u003eHand-threading reduces cross-threading risk\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets make leak-free connections quick and consistent\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions fit in confined plumbing spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hooshing 3\/4\" GHT F x 1\/4\" NPT F brass adapter is aimed at DIYers, gardeners, detailers, and technicians who need a reliable, corrosion-resistant connector for water-treatment equipment, pressure gauges, or specialty hoses. If you work with deionized systems, filtration gear, or need a dependable garden-hose adapter for outdoor cleaning and car care, this compact brass fitting simplifies hookups and reduces leak issues.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter compatible with standard garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. One side is 3\/4\" GHT female, compatible with standard garden hoses and spigots.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter include seals to prevent leaking?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships with rubber gaskets to enhance sealing and reduce drip points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192805740728,"sku":"B0F28L77D8","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-adapter-front-view_1371a29c-2e52-4313-bfc4-ca3ed103a0ab.jpg?v=1790550965"},{"product_id":"hooshing-brass-hex-bushing-adapter-3-4-ght-male-to-1-2-npt-female-2-pack-forged-corrosion-resistant-reducers","title":"Hooshing Brass Hex Bushing Adapter 3\/4\" GHT Male to 1\/2\" NPT Female, 2-Pack — Forged Corrosion-Resistant Reducers","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS brass hex bushings convert a 3\/4\" GHT male connection to a 1\/2\" NPT female thread for durable, leak-resistant joins between different pipe sizes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of heavy-duty brass adapters lets you join fittings with mismatched thread standards or diameters—perfect when replacing a section of piping isn’t practical. Made from forged brass, the bushings resist corrosion and handle a wide temperature range from -65°F to +250°F (-53°C to +121°C). They’re intended for plumbing, compressed air, hydraulic lines, gas, and other general-purpose fluid connections where a reliable taper-to-garden-thread transition is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors solve mismatched thread issues?\u003c\/h3\u003e\n\u003cp\u003eThese hex bushings act as reducers that join a 3\/4\" GHT (garden hose thread) male to a 1\/2\" NPT (National Pipe Taper) female without cutting or replacing piping. That saves time and prevents the need for adapter chains or custom fabrication. The hex shape provides a solid grip for tightening with a wrench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts 3\/4\" GHT male threads to 1\/2\" NPT female threads\u003c\/li\u003e\n  \u003cli\u003eForged brass body for consistent thread engagement\u003c\/li\u003e\n  \u003cli\u003eHex exterior for easy wrench tightening and loosening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect under pressure and temperature?\u003c\/h3\u003e\n\u003cp\u003eThe forged brass construction tolerates a broad temperature span and offers good corrosion resistance for most residential and light-commercial uses. While these adapters are robust, final suitability depends on system pressure ratings and application-specific safety guidelines. They are engineered for general air, water, oil, and gas service rather than specialty high-pressure or hazardous-material systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature: -65°F to +250°F (-53°C to +121°C)\u003c\/li\u003e\n  \u003cli\u003eLow magnetic permeability and strong thread integrity\u003c\/li\u003e\n  \u003cli\u003eAppropriate for plumbing, compressed air, hydraulic, and fuel lines in standard conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Hooshing 3\/4\" GHT to 1\/2\" NPT hex bushing?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: verify thread types and sizes, hand-start the threads to avoid cross-threading, then tighten using a wrench on the hex flats. Use thread sealant or plumber’s tape on the NPT taper if the application requires a pressure-tight seal. Avoid over-torquing to protect the threads and maintain a proper seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm 3\/4\" GHT male and 1\/2\" NPT female thread compatibility\u003c\/li\u003e\n  \u003cli\u003eHand-start threads, then wrench-tighten on hex flats\u003c\/li\u003e\n  \u003cli\u003eApply appropriate thread sealant for pressure-tight joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich situations are best for these bushings?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are ideal whenever you need a compact, reliable transition between garden-type fittings and NPT plumbing without altering existing pipes. They are especially handy for retrofit jobs, temporary connections, or when working with mixed-thread equipment. Keep in mind that for specialized or regulated gas systems you should follow local codes and, if necessary, consult a professional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRetrofits where replacing a run of pipe is impractical\u003c\/li\u003e\n  \u003cli\u003eConnecting garden hose accessories to NPT-equipped fixtures\u003c\/li\u003e\n  \u003cli\u003ePortable equipment, compressors, or on-site repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: DIY homeowners, landscapers, maintenance technicians, and contractors who need a compact, heavy-duty threaded reducer to connect 3\/4\" GHT male fittings to 1\/2\" NPT female ports. If you work with standard plumbing, air, or light hydraulic lines and value corrosion resistance and easy installation, this two-pack of Hooshing forged brass hex bushings provides a durable, inexpensive solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these adapters compatible with garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They convert a 3\/4\" GHT male garden-hose thread to a 1\/2\" NPT female connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need sealant when installing the Hooshing bushing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use thread sealant or plumber’s tape on the NPT taper for pressure-tight applications; GHT connections may seal by thread engagement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192810131640,"sku":"B0CYSK9YPG","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-connector.jpg?v=1790551183"},{"product_id":"hooshing-brass-garden-hose-adapter-1-2-npt-f-to-3-4-ght-f-2-pack-washer-included-corrosion-resistant","title":"Hooshing Brass Garden Hose Adapter 1\/2\" NPT F to 3\/4\" GHT F – 2-Pack, Washer Included, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Adapter converts a 1\/2\" NPT female pipe connection to a 3\/4\" GHT female garden hose thread, providing a durable brass link between differing hose and faucet fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two precision-made brass adapters let you join plumbing components that use national pipe thread (NPT) and standard garden hose thread (GHT) without resorting to improvised fittings. Each adapter is solid brass for corrosion resistance and includes a washer to reduce leaks, making it a practical addition to outdoor watering, cleaning, or irrigation setups. The compact design fits common hose and faucet configurations, and the package contains two identical adapters so you can convert multiple connections or keep a spare on hand.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter actually connect NPT and GHT fittings?\u003c\/h3\u003e\n\u003cp\u003eThe adapter features a female 1\/2\" NPT bore on one end and a female 3\/4\" GHT on the other, allowing two different thread standards to be joined via a short brass coupling. NPT is a tapered pipe thread used in plumbing; GHT is a straight thread used for hoses, so the adapter bridges those mechanical differences without modifying existing plumbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" NPT female side fits nominal 1\/2\" tapered pipe threads\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female side accepts standard garden hose threads\u003c\/li\u003e\n  \u003cli\u003eIncluded rubber washer helps form a water-tight seal\u003c\/li\u003e\n  \u003cli\u003eSolid brass body resists corrosion and mechanical wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this stop leaks and hold up outdoors?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly with the supplied washer, the brass adapter provides a tight mechanical connection suitable for typical outdoor water pressure. Brass resists rust and the adapter's precision machining reduces mismatched threads that cause dripping or weeping over time. For best performance, check the washer condition and tighten by hand plus a small additional turn with pliers if needed; avoid over-torquing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWasher included to minimize seepage at the garden hose joint\u003c\/li\u003e\n  \u003cli\u003eBrass construction stays rust-resistant in wet environments\u003c\/li\u003e\n  \u003cli\u003ePrecision threads reduce cross-threading and uneven seals\u003c\/li\u003e\n  \u003cli\u003eKeep spare washers on hand to maintain leak-free service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications and fittings is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is useful wherever you need to join a 1\/2\" NPT female threaded pipe or fitting to a standard 3\/4\" garden hose. Typical uses include connecting faucets, water pumps, cleaning rigs, irrigation lines, pressure washers with compatible fittings, and other hose or pipe assemblies that use those thread types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAttach garden hoses to faucets or pipe outlets with 1\/2\" NPT\u003c\/li\u003e\n  \u003cli\u003eConnect pump outlets or filtration units using matching threads\u003c\/li\u003e\n  \u003cli\u003eIntegrate into watering systems, car-wash stations, or cleaning setups\u003c\/li\u003e\n  \u003cli\u003eUseful as a spare adapter in outdoor toolkits and repair boxes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the right size and avoid fit issues?\u003c\/h3\u003e\n\u003cp\u003eThread size labels are nominal pipe sizes and do not equal exact diameters, so verify the thread type and nominal size before buying. Confirm that your existing component is labeled 1\/2\" NPT (tapered) or 3\/4\" GHT (garden hose thread) and inspect thread condition; damaged threads may need repair or replacement for a secure seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure or confirm thread standards on both components first\u003c\/li\u003e\n  \u003cli\u003eInspect threads for wear—replace if heavily damaged\u003c\/li\u003e\n  \u003cli\u003eUse the supplied washer; replace periodically to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eAvoid excessive torque—hand-tighten, then small wrench turn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 2PCS Garden Hose Adapter is ideal for homeowners, gardeners, landscapers, and anyone maintaining outdoor water systems who needs a reliable brass solution for joining 1\/2\" NPT plumbing to 3\/4\" garden hoses. It's also handy for contractors, maintenance crews, and DIYers who prefer corrosion-resistant fittings and want a compact, no-frills way to adapt mismatched thread standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this adapter include a seal to prevent leaks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each adapter comes with a rubber washer to help form a watertight seal at the garden hose connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this outdoors year-round?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The solid brass construction resists rust, but remove or winterize fittings in freezing climates to avoid damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192813342904,"sku":"B0C164HF1L","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-adapter.jpg?v=1790551330"},{"product_id":"hooshing-garden-hose-swivel-adapter-3-8-barb-to-3-4-ght-female-2pcs-brass-leak-resistant-with-clamps","title":"Hooshing Garden Hose Swivel Adapter 3\/8\" Barb to 3\/4\" GHT Female — 2PCS Brass, Leak-Resistant with Clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Swivel Adapter converts a 3\/8\" ID hose to a standard 3\/4\" GHT female thread for fast, leak-resistant outdoor water connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-piece kit includes brass swivel hex connectors designed to bridge smaller tubing and common 3\/4\" garden hose fittings. Each adapter pairs a 3\/8\" (10mm OD) hose barb with a 3\/4\" garden hose thread (GHT) female end, plus gaskets and stainless-steel clamps for improved sealing. The solid-brass construction resists wear and heat while the compact hex body makes installation simple with basic tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install the Hooshing 3\/8\" barb to 3\/4\" GHT adapter?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires no specialty equipment. Push the 3\/8\" hose onto the barb, tighten the stainless-steel clamp, and screw the 3\/4\" GHT female end onto the male garden hose thread until snug. Replace the gasket before connecting to ensure a tight seal and check for leaks before full pressurization.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlide hose fully onto 3\/8\" (10mm OD) barb for secure fit\u003c\/li\u003e\n  \u003cli\u003ePosition included gasket in the GHT female cup\u003c\/li\u003e\n  \u003cli\u003eTighten clamp and hand-screw the 3\/4\" GHT to mating thread\u003c\/li\u003e\n  \u003cli\u003eTest under water pressure and retighten clamp if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat compatibility should I expect with garden fittings?\u003c\/h3\u003e\n\u003cp\u003eThe female GHT end is the standard size used on most outdoor faucets, sprinklers, timers, and hose attachments, so it pairs broadly with garden systems. The 3\/8\" hose barb fits hoses with a 3\/8\" inner diameter (about 10mm OD). Use common hose clamps and adapters to bridge mismatched sizes when necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" GHT female mates with faucets, nozzles, timers, splitters, and filters\u003c\/li\u003e\n  \u003cli\u003e3\/8\" barb works with tubing rated for 3\/8\" ID (10mm OD)\u003c\/li\u003e\n  \u003cli\u003eIncluded stainless-steel clamps and gaskets improve compatibility and seal\u003c\/li\u003e\n  \u003cli\u003eCan be used as a repair mender for torn or frayed hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose brass swivel adapters instead of plastic fittings?\u003c\/h3\u003e\n\u003cp\u003eBrass offers durability, heat tolerance, and lower risk of deformation than many plastics. These Hooshing fittings maintain thread integrity and resist cracking under repeated connections, making them better suited for seasonal outdoor use and heavier-duty garden systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body resists corrosion and mechanical wear\u003c\/li\u003e\n  \u003cli\u003eLow magnetic permeability and higher temperature tolerance than plastics\u003c\/li\u003e\n  \u003cli\u003eReusable and less likely to strip threads or crack over time\u003c\/li\u003e\n  \u003cli\u003eSupplied gaskets and stainless clamps reduce leakage risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these adapters be used for permanent repairs or temporary hookups?\u003c\/h3\u003e\n\u003cp\u003eThe Hooshing adapters are versatile for both temporary connections and longer-term hose repairs. When used with the provided gasket and clamp, they create a reliable seal suitable for regular garden watering tasks; for pressurized, permanent installations, confirm hose rating and recheck seals periodically.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreat for quick repairs on torn hose ends or mismatched fittings\u003c\/li\u003e\n  \u003cli\u003eDurable enough for repeated seasonal use and retrofit projects\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspection recommended for heavily used systems\u003c\/li\u003e\n  \u003cli\u003eBest paired with hose rated for the intended water pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Gardeners, landscapers, and DIY homeowners who need a compact, sturdy way to link smaller-diameter tubing to standard garden hose thread fittings. If you maintain sprinklers, timers, filters, or frequently repair hoses, this two-pack of brass adapters provides a dependable, easy-to-install solution that reduces leaks and extends hose utility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit my garden faucet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 3\/4\" GHT female thread matches standard outdoor faucet threads and most hose attachments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the 3\/8\" barb with vinyl tubing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits hoses with a 3\/8\" inner diameter (approx. 10mm); use the included clamp for a secure seal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192828580024,"sku":"B0CWQW76LK","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-brass-adapter.jpg?v=1790551936"},{"product_id":"hooshing-garden-hose-connector-3-8-barb-to-3-4-ght-female-2-piece-brass-adapters-with-gasket-clamp","title":"Hooshing garden hose connector 3\/8\" barb to 3\/4\" GHT female — 2-piece brass adapters with gasket \u0026 clamp","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Connector is a brass 3\/8\" barb to 3\/4\" GHT female adapter set that repairs, extends, and adapts garden hoses quickly and leak-resistently.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace or join hoses without buying a new length: these two brass fittings convert a 3\/8\" inner-diameter hose to a standard 3\/4\" GHT female thread, making them useful for repairs, extensions, and connecting irrigation or watering accessories. Each adapter ships with a gasket and stainless-steel clamp so you can make a tight seal and return a damaged hose to service in minutes.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use the Hooshing connector to repair a broken hose?\u003c\/h3\u003e\n\u003cp\u003eRepairing a split or frayed hose is simple—cut away the damaged section, insert the 3\/8\" barb fully into the hose, then secure it with the supplied stainless-steel clamp. The gasket fits inside the threaded end to prevent leaks when you attach a GHT male fitting or faucet accessory.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut hose cleanly square using a knife or hose cutter\u003c\/li\u003e\n  \u003cli\u003ePush hose onto the 3\/8\" brass barb until seated\u003c\/li\u003e\n  \u003cli\u003ePlace the clamp over the joint and tighten securely\u003c\/li\u003e\n  \u003cli\u003eScrew a 3\/4\" GHT male fitting onto the female thread with the gasket in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these adapters connect different watering tools and faucets?\u003c\/h3\u003e\n\u003cp\u003eYes—each adapter converts a 3\/8\" hose end into a 3\/4\" GHT female connection, so you can attach sprinklers, nozzles, filters, or faucet threads that use the common garden-thread size. The brass construction resists corrosion for outdoor use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with standard 3\/4\" garden-thread male fittings\u003c\/li\u003e\n  \u003cli\u003eCompatible with spray nozzles, sprinklers, solenoid valves, and quick connectors\u003c\/li\u003e\n  \u003cli\u003eSuitable for low-flow drip lines and small irrigation setups\u003c\/li\u003e\n  \u003cli\u003eBrass body for outdoor durability and rust resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this connector prevent leaks and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is machined from brass and comes with a rubber gasket plus a stainless-steel clamp to form a reliable, low-leak joint. Brass resists rust and mineral damage better than plated or plastic fittings, and the clamp keeps the hose from slipping off under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass housing reduces corrosion versus cheaper metals\u003c\/li\u003e\n  \u003cli\u003eRubber gasket improves thread sealing for water-tight connections\u003c\/li\u003e\n  \u003cli\u003eStainless clamp prevents hose slippage and withstands outdoor conditions\u003c\/li\u003e\n  \u003cli\u003eTwo-piece set gives spare or paired repair capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Home gardeners, landscapers, and anyone maintaining irrigation or watering lines will find these adapters handy when repairing hoses, adding attachments, or converting small-diameter tubing to standard garden-thread fittings. If you manage drip systems, container irrigation, or simply want a quick fix for a leaky hose, the Hooshing connectors offer a compact, durable solution that saves time and material costs versus replacing whole hoses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose size fits these connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are made for 3\/8\" inner-diameter hoses and convert to a 3\/4\" GHT female thread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps and gaskets included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each pack contains two adapters, two stainless-steel clamps, and two rubber gaskets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192837394616,"sku":"B0DWMRY1ND","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-pair.jpg?v=1790552258"},{"product_id":"hooshing-brass-garden-hose-adapter-3-4-ght-male-to-3-4-npt-female-2-pack-solid-corrosion-resistant-with-washers","title":"Hooshing Brass Garden Hose Adapter 3\/4\" GHT Male to 3\/4\" NPT Female, 2-Pack — Solid Corrosion-Resistant with Washers","description":"\u003cp\u003e\u003cstrong\u003eHooshing's 2PCS 3\/4\" GHT male to 3\/4\" NPT female brass adapters are compact, corrosion-resistant fittings that let you join garden hoses and pipe fittings with mismatched thread types reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese solid-brass adapters convert a 3\/4\" GHT (garden hose thread) male connection to a 3\/4\" NPT (national pipe thread) female, giving you a simple, durable way to link hoses, faucets, and irrigation components that otherwise won't mate. Each adapter measures about 1 inch outer diameter by 1 inch inner diameter (nominal pipe sizes vary from actual diameters), comes with washers to reduce leaks, and is finished for corrosion resistance and long-term performance in outdoor conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter solve incompatible hose and pipe threads?\u003c\/h3\u003e\n\u003cp\u003eWhen your garden hose and a fixture use different thread standards, you need a precision adapter to bridge them. The Hooshing piece provides a correct mechanical interface between 3\/4\" GHT male and 3\/4\" NPT female threads so you can attach standard hoses to NPT-threaded faucets or equipment without makeshift solutions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts GHT male threads to NPT female threads for compatibility.\u003c\/li\u003e\n  \u003cli\u003eSolid brass body resists corrosion that can seize connectors.\u003c\/li\u003e\n  \u003cli\u003eIncludes washers to reduce drip and seepage at the joint.\u003c\/li\u003e\n  \u003cli\u003eCompact 1\" O.D. x 1\" I.D. approximate size for tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these adapters leak or withstand outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe adapters are machined from premium solid brass and include washers to create a tight seal; that combination reduces the chance of leaks under normal garden pressures. Brass offers good ductility at temperature changes and natural corrosion resistance for outdoor plumbing tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision manufacturing for consistent thread engagement.\u003c\/li\u003e\n  \u003cli\u003eWasher included with each adapter to minimize leakage.\u003c\/li\u003e\n  \u003cli\u003eBrass resists rust and performs well in wet environments.\u003c\/li\u003e\n  \u003cli\u003eSuitable for typical household water pressure and irrigation setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: hand-start the threads to avoid cross-threading, then tighten with a standard adjustable wrench or pliers if needed. No specialty tools required, and the compact size fits most hose spigots and fittings used in gardens and cleaning systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-thread initially to prevent cross-threading damage.\u003c\/li\u003e\n  \u003cli\u003eFinish tightening with adjustable wrench or pliers as needed.\u003c\/li\u003e\n  \u003cli\u003eWasher fits into the female end for a quicker, leak-resistant seal.\u003c\/li\u003e\n  \u003cli\u003eWorks with hose connectors, faucets, cleaning rigs, and irrigation fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to ensure a correct fit?\u003c\/h3\u003e\n\u003cp\u003eThread labeling uses nominal pipe sizes that don't match actual diameters, so verify your existing connector is indeed 3\/4\" GHT male or 3\/4\" NPT female before buying. If unsure, compare physical thread form or consult the device manual to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your hose or fixture uses 3\/4\" GHT or 3\/4\" NPT standards.\u003c\/li\u003e\n  \u003cli\u003eMeasure outer diameter if thread labeling is unclear.\u003c\/li\u003e\n  \u003cli\u003eContact Hooshing support for sizing questions when in doubt.\u003c\/li\u003e\n  \u003cli\u003eKeep spare washers on hand for future maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Home gardeners, renters, handypersons, and small-scale landscapers who need a reliable, compact brass adapter to join garden hoses to NPT-threaded faucets, pumps, or equipment will find this product useful. It suits anyone who wants a durable, easy-to-install connector that reduces leakage and stands up to outdoor conditions without resorting to improvised fittings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the washers included and replaceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—each adapter includes a washer to help seal the joint; you can replace it with standard garden hose washers if needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this adapter with hot water or pumps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Solid brass tolerates typical hot-water and pump conditions, but avoid extreme temperatures or pressures beyond standard garden\/pump specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192838967480,"sku":"B0BWSY2ZM7","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-adapter_0566f452-670e-46fa-90d8-4f3defffccbd.jpg?v=1790552325"},{"product_id":"hooshing-1-4-od-to-3-4-ght-garden-hose-female-adapter-2-pack-lead-free-brass-with-washers","title":"Hooshing 1\/4 OD to 3\/4 GHT Garden Hose Female Adapter — 2 Pack, Lead-Free Brass with Washers","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2 Pack 1\/4\" OD Compression to 3\/4\" GHT adapter converts a 1\/4\" OD compression tube to a standard 3\/4\" female garden hose thread in durable lead-free brass.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-piece set provides a simple, reliable way to join a 1\/4\" outer diameter line—like tubing used for ice makers, drip irrigation or hydronic lines—to common 3\/4\" GHT (garden hose) fittings. Each adapter is machined from lead-free brass, includes a waterproof rubber washer in the adapter, and supplies an extra replacement washer so you can reinstall or swap fittings without hunting for parts. The hex head on both ends offers a secure grip for tightening by hand or with a wrench.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter attach a 1\/4\" tube to a garden hose fitting?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter uses a compression-style sleeve that seals around a 1\/4\" OD tube on one side and a female 3\/4\" GHT thread on the other. Tightening compresses the ferrule onto the tubing, forming a leak-resistant joint while the GHT female thread connects to standard garden hose male threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" OD compression connection for aluminum, plastic or copper tubing\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female thread for standard garden hose male fittings\u003c\/li\u003e\n  \u003cli\u003eIncluded rubber washers provide an internal seal for GHT side\u003c\/li\u003e\n  \u003cli\u003eHex head on both ends for hand or wrench tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe Hooshing adapters are made from solid, lead-free brass that's machined for corrosion resistance and long service life. Brass resists rust and wear better than many plated metals and is suitable for potable water systems as well as general outdoor use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLead-free brass construction for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eWear-resistant threads and compression surfaces\u003c\/li\u003e\n  \u003cli\u003eRubber washers included to maintain a watertight seal\u003c\/li\u003e\n  \u003cli\u003eDurable under typical residential and light commercial conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere will these adapters be useful around the home or workplace?\u003c\/h3\u003e\n\n\u003cp\u003eThey work anywhere you need to join 1\/4\" tubing to a garden hose connection: ice-maker lines, refrigerator water lines, drip irrigation, countertop water lines, or hydronic distribution loops where a garden-hose feedpoint is convenient. The compact metal body and simple installation make them versatile for plumbing, gardening and appliance hookups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIce maker and refrigerator water connections\u003c\/li\u003e\n  \u003cli\u003eDrip irrigation and garden hose systems\u003c\/li\u003e\n  \u003cli\u003eHydronic heating distribution or temporary water lines\u003c\/li\u003e\n  \u003cli\u003eWorkshop, RV, or outdoor appliance hookups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these compression-to-GHT adapters?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: slide the compression nut and ferrule onto the tube, insert the tube into the adapter, then tighten the nut until the ferrule compresses and seals. On the GHT side, use the included rubber washer and hand-tighten the connection; finish with a wrench on the hex head if needed. Periodically check for leaks and replace the spare washers if sealing degrades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten then finish with wrench on hex head if required\u003c\/li\u003e\n  \u003cli\u003eReplace rubber washer when wear or leakage appears\u003c\/li\u003e\n  \u003cli\u003eAvoid overtightening to prevent tube or ferrule damage\u003c\/li\u003e\n  \u003cli\u003eAllow slight size tolerance due to manual measurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, DIYers and homeowners who need a compact, durable adapter to link 1\/4\" OD tubing to standard 3\/4\" garden hose threads will find this Hooshing 2-pack useful. It suits anyone maintaining ice makers, refrigerators, drip-irrigation runs, or temporary water hookups who values corrosion-resistant brass hardware and extra washers for quick maintenance. Note: color and small size measurements may vary slightly due to screen display or manual measuring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit plastic 1\/4\" tubing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 1\/4\" OD tubing made of plastic, aluminum, or copper when properly compressed with the ferrule.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement washers included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each 2-pack includes two waterproof rubber washers plus one spare replacement washer for future use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192844243128,"sku":"B0D78V3WSJ","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-adapter.jpg?v=1790552590"},{"product_id":"hooshing-garden-hose-swivel-adapter-1-4-barb-to-3-4-ght-female-2-pack-brass-with-gaskets-clamps","title":"Hooshing Garden Hose Swivel Adapter 1\/4\" Barb to 3\/4\" GHT Female — 2-Pack Brass with Gaskets \u0026 Clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Swivel Adapters convert 1\/4\" ID tubing into a secure 3\/4\" GHT female hose connection for quick, leak-resistant outdoor watering hookups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese brass swivel adapters are designed to link small-diameter tubing or repair torn lines to standard garden hose threads—so you can attach sprinklers, timers, nozzles, or filters without fiddly improvised fittings. Each kit contains two hex-style brass connectors, rubber gaskets, and stainless-steel clamps to improve sealing and durability in routine garden and outdoor water tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters make connecting small tubing to a garden hose easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe barb end accepts 1\/4\" ID tubing and the opposite side threads onto any 3\/4\" GHT female hose fitting, creating a sturdy junction that resists twisting and leaks. The hex shape provides a grip for tightening, and included clamps lock the hose to the barb for a more reliable seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" barb fits hoses with 7mm OD\/1\/4\" inner diameter tubing.\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female thread mates with standard garden hose fittings and accessories.\u003c\/li\u003e\n  \u003cli\u003eHex body lets you tighten with pliers or a wrench for secure installation.\u003c\/li\u003e\n  \u003cli\u003eGaskets and stainless-steel clamps minimize drips at the connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect from the Hooshing adapter?\u003c\/h3\u003e\n\n\u003cp\u003eThese connectors are machined from solid brass, chosen for strength, heat tolerance, and long service life in outdoor environments. Brass resists corrosion better than many low-cost metals, and the supplied rubber gaskets maintain a tighter seal under pressure compared with thread-only joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for durability and reduced corrosion over time.\u003c\/li\u003e\n  \u003cli\u003eNon-magnetic and high-temperature tolerant metal for outdoor use.\u003c\/li\u003e\n  \u003cli\u003eRubber gasket included to improve thread seal and reduce leaks.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps resist rust and secure tubing to the barb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these with my sprinkler, timer, or other garden devices?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The 3\/4\" GHT female end is a standard garden-hose thread that works with faucets, sprinklers, splitters, filters, timers, and spray nozzles. The adapter is intended to bridge small-diameter irrigation tubing or repair hose ends so they integrate with common outdoor watering equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with outdoor faucets, sprinkler heads, and hose timers.\u003c\/li\u003e\n  \u003cli\u003eUseful for repairing torn tubing or converting drip lines to hose threads.\u003c\/li\u003e\n  \u003cli\u003eTwo-piece kit allows multiple connections or a spare on hand.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten or use a wrench for a watertight fit depending on flow needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these hose swivel adapters?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: slide the 1\/4\" tubing onto the barb, clamp it in place, then thread the female GHT onto the male garden hose connection with the gasket seated to prevent leaks. Periodically inspect clamps and gaskets; replace the rubber gasket if cracking appears and retighten clamps after seasonal temperature changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush tubing fully onto the 1\/4\" barb until it seats at the hex shoulder.\u003c\/li\u003e\n  \u003cli\u003ePlace clamp over tubing and tighten with a screwdriver or nut driver.\u003c\/li\u003e\n  \u003cli\u003eThread 3\/4\" GHT onto male hose fitting with gasket in position; hand-tighten plus slight wrench turn if needed.\u003c\/li\u003e\n  \u003cli\u003eCheck for leaks and re-tighten clamps or replace gasket if necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Home gardeners, small-scale landscapers, and DIYers who need to adapt 1\/4\" tubing or repair hose ends to standard garden-hose fittings will find these Hooshing swivel adapters practical and long-lasting. They are particularly useful when converting drip or micro-irrigation lines to work with sprinklers, timers, or outdoor faucets, or for keeping a spare connector on hand for quick field repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit standard garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the female end is 3\/4\" GHT, compatible with common garden hose threads and most outdoor watering devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What diameter tubing works on the barb side?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The barb is sized for 1\/4\" inner diameter tubing (approximately 7mm outer diameter).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192849223864,"sku":"B0D93RF249","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view.jpg?v=1790552770"},{"product_id":"hooshing-garden-hose-swivel-adapter-5-8-to-3-4-ght-2pcs-brass-with-clamps-gaskets-leak-resistant","title":"Hooshing Garden Hose Swivel Adapter 5\/8\" to 3\/4\" GHT — 2PCS Brass with Clamps \u0026 Gaskets, Leak‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Swivel Adapter converts a 5\/8\" ID hose to a 3\/4\" GHT female thread for fast, leak-resistant outdoor watering connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese small but sturdy brass adapters let you join, repair or extend garden hoses and attach standard 3\/4\" garden-thread fittings—like nozzles, timers, filters and splitters—without needing specialty tools. Supplied as a pair with gaskets and adjustable stainless-steel clamps, the connectors are built for repeated use and heavy-duty outdoor conditions. The 16mm (approx. 5\/8\") barb end fits common soft hoses while the standard 3\/4\" GHT female accepts typical threaded garden accessories.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters make hose repairs and extensions easier?\u003c\/h3\u003e\n\u003cp\u003eEach adapter has a ridged 5\/8\" barb for a secure push-fit into flexible hose and a 3\/4\" GHT female thread for quick connection to garden fittings. They eliminate the need to replace entire hose sections and let you splice in new attachments quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-in 5\/8\" (16mm) barb secures with included clamp\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female thread accepts standard garden fittings\u003c\/li\u003e\n  \u003cli\u003eTwo-piece pack for repairing two hoses or creating a spare\u003c\/li\u003e\n  \u003cli\u003eGaskets provided to help prevent leaks at the threaded joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these adapters durable enough for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe adapters are machined from solid brass, which offers corrosion resistance and withstands outdoor temperatures better than many plated alloys. Stainless-steel clamps add rust resistance where the hose meets the barb, so the whole assembly stands up to seasonal exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body resists corrosion and warping\u003c\/li\u003e\n  \u003cli\u003eLow magnetic permeability and high temperature tolerance\u003c\/li\u003e\n  \u003cli\u003eStainless-steel adjustable clamps prevent slippage\u003c\/li\u003e\n  \u003cli\u003eReplacement gaskets included for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my hose and garden accessories?\u003c\/h3\u003e\n\u003cp\u003eThe barb outer diameter is 16mm, designed for hoses with a 5\/8\" internal diameter. The opposite end is a standard 3\/4\" GHT female thread, compatible with most garden taps, nozzles, timers and splitters sold for home watering systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBarb OD: 16mm — fits typical 5\/8\" ID garden hoses\u003c\/li\u003e\n  \u003cli\u003eFemale thread: standard 3\/4\" GHT for wide accessory compatibility\u003c\/li\u003e\n  \u003cli\u003eWorks with faucets, sprinklers, filters, timers and nozzles\u003c\/li\u003e\n  \u003cli\u003eIncludes clamps and gaskets for adaptation to slightly varied hose walls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these hose connectors?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: push the hose onto the barb, slide the clamp into place, tighten, then screw the female thread onto the garden fitting with the gasket in place. Periodic checks of the clamp and gasket will keep connections watertight and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-fit hose onto the 5\/8\" barb and tighten clamp securely\u003c\/li\u003e\n  \u003cli\u003eUse supplied gasket on the 3\/4\" GHT thread to reduce leakage\u003c\/li\u003e\n  \u003cli\u003eInspect clamps and gaskets seasonally for wear\u003c\/li\u003e\n  \u003cli\u003eLubricate gasket lightly if needed for easier threading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 2PCS swivel adapters are ideal for gardeners, landscapers and DIY homeowners who need a reliable, low-cost way to repair torn hoses, adapt different hose sizes or connect popular garden-thread accessories. If you work with standard 5\/8\" hoses and want to attach 3\/4\" GHT fittings without buying new lines, these brass connectors offer a durable, easy-to-install solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the barb fit a 5\/8\" garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the barb OD is 16mm, designed to fit hoses with a 5\/8\" internal diameter snugly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps and gaskets included with these adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—each pack includes two stainless-steel adjustable clamps and threaded gaskets for leak control.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192867836088,"sku":"B0DNW8B964","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-connector-pair.jpg?v=1790553122"},{"product_id":"hooshing-pol-to-1-4-npt-propane-adapter-soft-nose-brass-fits-20-30-lb-tanks","title":"Hooshing POL to 1\/4\" NPT Propane Adapter — Soft-Nose Brass, Fits 20\/30 lb Tanks","description":"\u003cp\u003e\u003cstrong\u003eThe Hooshing Soft Nose POL Propane Gas Fitting Adapter converts a standard POL tank connection to a 1\/4\" male NPT, creating a secure, leak-resistant link between refillable propane cylinders and regulator or hose assemblies.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact brass adapter is designed for homeowners and outdoor enthusiasts who need a reliable way to attach a regulator, valve, or hose to a POL-style propane tank. Machined from solid brass, the adapter provides a sturdy metal-to-metal seal and a soft-nose design to help protect threads during hand-tightening. It fits common 20 lb and 30 lb refillable cylinders and is meant for typical outdoor appliances like grills, camping stoves, and heaters.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter connect a regulator to a POL cylinder?\u003c\/h3\u003e\n\u003cp\u003eThe adapter threads into the POL (cylinder) receptacle and presents a male 1\/4\" NPT outlet for the regulator or hose. Its geometry and material ensure a metal seal suitable for low-pressure propane systems when used with the correct regulator and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePOL female-style connection mates with standard LP tank valves.\u003c\/li\u003e\n  \u003cli\u003e1\/4\" male NPT output accepts compatible regulators and hoses.\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion and holds threads under torque.\u003c\/li\u003e\n  \u003cli\u003eSoft-nose end reduces cross-threading during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this adapter safe and easy to install?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly and with compatible components, the adapter offers a secure, airtight connection. It is designed for quick hand or wrench tightening and is intended for low-pressure propane appliance use; follow all safety instructions for propane equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-start threads to avoid cross-threading; use a wrench for final snugging.\u003c\/li\u003e\n  \u003cli\u003eCheck industry-standard fittings and regulator specifications before use.\u003c\/li\u003e\n  \u003cli\u003eInspect for leaks with a soap-and-water solution after installation.\u003c\/li\u003e\n  \u003cli\u003eDo not modify threads or use with incompatible high-pressure systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat appliances and situations is the adapter suited for?\u003c\/h3\u003e\n\u003cp\u003eThis fitting works well with common outdoor propane setups where a POL tank needs a 1\/4\" NPT connection. Typical uses include backyard grills, portable camping stoves, patio heaters, and temporary or seasonal propane appliances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects 20 lb or 30 lb refillable propane cylinders to regulators and hoses.\u003c\/li\u003e\n  \u003cli\u003eUseful for BBQs, camping gear, patio heaters, and portable burners.\u003c\/li\u003e\n  \u003cli\u003eCompact profile fits limited-space installations and quick replacements.\u003c\/li\u003e\n  \u003cli\u003eDurable brass stands up to repeated installation cycles and outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hooshing POL-to-1\/4\" NPT adapter is aimed at homeowners, campers, and tradespeople who need a dependable, simple-fitting solution to adapt POL-style cylinders to common regulator and hose fittings. If you maintain grills, portable stoves, or outdoor heating equipment and require a compact, corrosion-resistant connector for refillable 20 lb or 30 lb tanks, this adapter offers a practical, long-lasting option. Always pair the adapter with the correct regulator and follow propane safety guidelines during installation and use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit my 20 lb propane tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it connects standard POL-style 20 lb refillable cylinders to a 1\/4\" male NPT regulator or hose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need thread sealant to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally no for POL-to-NPT propane low-pressure fittings, but follow regulator manufacturer guidance and leak-test after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192879861944,"sku":"B09KMRXP3N","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-pol-adapter-front-view.jpg?v=1790553488"},{"product_id":"hooshing-2-pack-brass-garden-hose-swivel-adapter-1-2-barb-to-3-4-ght-female-with-clamps","title":"Hooshing 2-pack Brass Garden Hose Swivel Adapter 1\/2\" Barb to 3\/4\" GHT Female with Clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Swivel Adapter converts a 1\/2\" inner-diameter hose to a 3\/4\" GHT female threaded connection for secure outdoor watering hookups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of brass swivel adapters provides a simple, heavy-duty solution when you need to join smaller-diameter tubing to standard garden hose fittings. Machined from solid brass and supplied with gaskets and stainless-steel clamps, each connector is built to hold a tight seal and resist corrosion while linking hoses, sprayers, timers, or filters. The compact hex-shaped body makes it easy to hand-tighten or use a wrench, and the swivel thread reduces stress on connections during use.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this adapter fit my hose and garden equipment?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter features a 1\/2\" barb sized to accept hoses with a 13mm outer diameter that match a 1\/2\" ID, and a standard 3\/4\" garden hose female (GHT) thread on the other end. That combination makes it compatible with most outdoor faucets, spray nozzles, sprinklers, timers, and similar garden accessories that use GHT threads. The kit includes rubber gaskets and stainless clamps so you can secure the hose over the barb and reduce leaks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1\/2\" barb fits hoses with 1\/2\" inner diameter (approx. 13 mm OD).\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female thread mates with standard garden fittings.\u003c\/li\u003e\n  \u003cli\u003eIncludes gaskets and stainless-steel clamps for waterproof connections.\u003c\/li\u003e\n  \u003cli\u003eHex body allows tightening with pliers or wrench when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eEach adapter is crafted from solid brass for improved strength and resistance to temperature and corrosion compared with many plated fittings. Brass reduces magnetic permeability and stands up to outdoor conditions, while included stainless clamps resist rust. This combination extends service life and helps prevent leaks that commonly occur with cheaper plastic fittings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for longevity and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps to avoid rusting at the hose connection.\u003c\/li\u003e\n  \u003cli\u003eDurable rubber gaskets for reliable sealing.\u003c\/li\u003e\n  \u003cli\u003eHex profile to prevent rounding during tightening or removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and everyday use?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: slide the hose over the barb, position the gasket, tighten the stainless clamp, and thread the GHT end onto your garden fitting. The swivel capability of the female thread reduces torque on the hose during rotation, so you can connect or disconnect without twisting or kinking the tube. No special tools are necessary, although pliers or a wrench can speed up assembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePush-on hose barb with clamp secures tubing quickly.\u003c\/li\u003e\n  \u003cli\u003eGHT female thread clicks into standard garden fittings by hand.\u003c\/li\u003e\n  \u003cli\u003eSwivel reduces hose twisting and wear during use.\u003c\/li\u003e\n  \u003cli\u003eNo adhesives required; seal achieved with supplied gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I choose this adapter over other fittings?\u003c\/h3\u003e\n\n\u003cp\u003ePick these adapters when you need to connect smaller irrigation tubing or a repaired hose to common garden-threaded devices. They are ideal for emergency hose repairs, adapting specialty tubing to household sprinklers or timers, and making temporary or permanent connections without replacing existing hoses. Two pieces in the pack make it easy to outfit multiple hoses or keep a spare on hand.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGreat for hose repair menders and retrofit tasks.\u003c\/li\u003e\n  \u003cli\u003eUse to join irrigation tubing to GHT-thread devices.\u003c\/li\u003e\n  \u003cli\u003eHandy to have for seasonal changes and quick fixes.\u003c\/li\u003e\n  \u003cli\u003eTwo-pack provides value and redundancy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Gardeners, landscapers, and homeowners who need a dependable, corrosion-resistant adapter to join 1\/2\" ID hoses to standard 3\/4\" garden-threaded fixtures. It’s suited for anyone doing hose repairs, linking irrigation components, or converting smaller tubing to work with common outdoor watering equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit my 1\/2 inch hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—its 1\/2\" barb is designed for hoses with a 1\/2\" inner diameter (about 13 mm OD). Use the stainless clamp and gasket for a secure seal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I attach this directly to a garden faucet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can screw the 3\/4\" GHT female end onto most standard garden-threaded faucets and accessories for quick connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192890904760,"sku":"B0D2226PTL","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view_6a153351-051d-4e57-905e-377d384532d6.jpg?v=1790553954"},{"product_id":"hooshing-brass-hose-adapters-1-2-barb-to-3-4-ght-male-2-piece-set-with-gaskets-stainless-clamps","title":"Hooshing brass hose adapters 1\/2\" barb to 3\/4\" GHT male — 2-piece set with gaskets \u0026 stainless clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS brass hose adapters convert a 1\/2\" ID flexible hose to a 3\/4\" GHT male garden hose thread for fast, leak-resistant outdoor connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two solid-brass connectors let you join small-diameter irrigation tubing or repair a torn hose end while plugging into standard garden-hose fittings like faucets, splitters, filters, timers and spray nozzles. Each adapter has a 1\/2\" barb (13mm outer diameter) for push-on or clamped hoses and a 3\/4\" GHT male threaded end for screw-on garden hose accessories. The set includes gaskets and stainless-steel clamps so you can assemble a durable, weather-ready link between tubing and garden equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters attach to my hose and garden fittings?\u003c\/h3\u003e\n\u003cp\u003eOne end of the adapter pushes into a 1\/2\" ID hose using the 13mm barb; secure it with the included stainless-steel clamp to prevent leaks under pressure. The opposite end is a standard 3\/4\" garden-hose-thread (GHT) male connector that screws into most outdoor faucets and common hose accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" barb fits hoses with 1\/2\" inner diameter (13mm OD).\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT male threads match standard garden hoses and fittings.\u003c\/li\u003e\n  \u003cli\u003eIncludes rubber gaskets for a watertight screw connection.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps lock the hose onto the barb securely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the Hooshing adapter offer?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are machined from solid brass, chosen for strength and thermal stability. Brass resists deformation and corrosion better than many plated or plastic fittings, giving longer service life when exposed to outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for high temperature resistance and robustness.\u003c\/li\u003e\n  \u003cli\u003eLow magnetic permeability and durable under mechanical stress.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant stainless-steel clamps included for secure sealing.\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets help prevent dripping at threaded connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tasks and setups are these adapters best suited for?\u003c\/h3\u003e\n\u003cp\u003eUse them to repair a torn hose end, connect small irrigation tubing to a garden faucet, or adapt hose-based accessories to narrower tubing. They work well for drip lines, portable sprinklers, timers, and retrofit projects where a 1\/2\" flexible hose must interface with standard garden-hose equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHose repair mender for damaged or cut hoses.\u003c\/li\u003e\n  \u003cli\u003eAdapter for garden timer, filter, or sprinkler with 3\/4\" GHT.\u003c\/li\u003e\n  \u003cli\u003eConnects 1\/2\" tubing to standard outdoor faucets or splitters.\u003c\/li\u003e\n  \u003cli\u003eUseful for temporary or permanent irrigation and watering setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires no special tools beyond a screwdriver or nut driver for the clamp. Slide the hose onto the barb, tighten the stainless clamp, apply the gasket, then screw the male GHT into the mating fitting—inspect periodically for wear and retighten as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple push-on barb installation with clamp tightening.\u003c\/li\u003e\n  \u003cli\u003eNo specialized adapters or crimps required.\u003c\/li\u003e\n  \u003cli\u003ePeriodic gasket inspection recommended to prevent leaks.\u003c\/li\u003e\n  \u003cli\u003eReplace clamps or gaskets easily if they wear over seasons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Gardeners, landscapers, and DIYers who need a compact, reliable bridge between 1\/2\" flexible tubing and standard 3\/4\" garden hose threads will benefit most. The Hooshing two-piece pack is also a practical choice for homeowners who want spare parts for hose repairs, contractors setting up temporary irrigation, or anyone upgrading small-diameter drip systems to work with common hose accessories. Because these adapters are brass with included clamps and gaskets, they suit repeated outdoor use and seasonal installations without frequent replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit my 1\/2\" hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the barb is sized for hoses with a 1\/2\" inner diameter (13mm OD); use the included clamp for a secure connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these outdoors year-round?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — solid brass construction and stainless clamps resist weathering; remove or winterize if freezing conditions occur.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192893984952,"sku":"B0D21R92SL","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view_7e3ba702-64d5-4b61-82ec-ab7d1340fb9a.jpg?v=1790554084"},{"product_id":"hooshing-garden-hose-adapter-3-4-npt-male-to-3-4-ght-female-solid-brass-washer-included-2-pack","title":"Hooshing Garden Hose Adapter 3\/4\" NPT Male to 3\/4\" GHT Female — Solid Brass, Washer Included (2-Pack)","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Garden Hose Adapter converts a 3\/4\" NPT male thread to a 3\/4\" GHT female thread for quick, leak-resistant joins between pipe and hose fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen plumbing or watering setups mix national pipe thread (NPT) pipes and garden hose thread (GHT) fittings, a reliable adapter prevents drips, cross-threading and frequent replacements. These Hooshing adapters are machined from solid brass and supplied with rubber washers so you can link sprinklers, hose bibs, quick-connects and pipe assemblies without improvising with tape or bulky couplers.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters prevent leaks and last outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe adapters use heavy-duty brass construction that resists corrosion, deformation and impact better than aluminum or plastic. Each adapter includes a compressible washer to create a tight seal at the joint, reducing drip points even under moderate pressure. Properly tightened, the thread difference is managed so fittings seat straight and reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for rust resistance and strength\u003c\/li\u003e\n  \u003cli\u003eIncluded washer for immediate seal without extra supplies\u003c\/li\u003e\n  \u003cli\u003ePrecision machining to minimize cross-threading\u003c\/li\u003e\n  \u003cli\u003eFits common 3\/4\" GHT garden hoses and 3\/4\" NPT pipe fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this adapter fit my existing hose and plumbing parts?\u003c\/h3\u003e\n\u003cp\u003eThese adapters convert a standard 3\/4\" NPT male thread to a 3\/4\" GHT female thread — two common but different standards. Before ordering, check whether your male fitting is NPT (pipe thread) and your hose or accessory uses garden hose thread (GHT). If both sizes match as listed, the adapter will join them securely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" NPT male side mates with standard 3\/4\" pipe threads\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female side accepts standard garden hose ends\u003c\/li\u003e\n  \u003cli\u003eNot suitable where both sides use the same thread standard unless intentionally converting\u003c\/li\u003e\n  \u003cli\u003eVerify thread type visually or by checking product specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and removal for seasonal use?\u003c\/h3\u003e\n\u003cp\u003eThese fittings are designed for hand-tightening plus a small turn with a wrench when needed, making them simple to install or remove between seasons. The compact brass body keeps the adapter lightweight while remaining durable for repeated swaps. No special tools or sealant are required thanks to the included washer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten initially; wrench-tighten for extra security\u003c\/li\u003e\n  \u003cli\u003eWasher eliminates need for thread tape in most garden applications\u003c\/li\u003e\n  \u003cli\u003eQuick to remove for winterizing or replacing accessories\u003c\/li\u003e\n  \u003cli\u003eDurable finish resists weather during storage and use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are common uses for this NPT-to-GHT adapter?\u003c\/h3\u003e\n\u003cp\u003eUse it wherever pipe-threaded components must connect to garden hose accessories — pressure washers, in-line filters, irrigation lines, or outdoor taps. It bridges workshop plumbing with consumer hose products so you can attach hose reels, nozzles and quick-connect couplers that otherwise wouldn’t match the plumbing threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect pipe-threaded outlets to garden hoses and nozzles\u003c\/li\u003e\n  \u003cli\u003eAttach pressure washer hose ends to plumbing outlets with GHT accessories\u003c\/li\u003e\n  \u003cli\u003eIntegrate inline filters and water meters with hose systems\u003c\/li\u003e\n  \u003cli\u003eUse in temporary setups, greenhouse irrigation or outdoor cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, landscapers, and hobbyists who need a compact, reliable way to join 3\/4\" NPT pipe fittings to 3\/4\" GHT garden hose accessories. If you work with mixed-thread water systems or swap hose accessories seasonally, these brass Hooshing adapters offer a durable, easy-to-use solution that reduces leaks and saves time.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these adapters compatible with garden hose fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the female side is standard 3\/4\" GHT and accepts typical garden hose ends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need thread seal tape with these adapters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no; the included washer provides a proper seal, though tape can be added for extra assurance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192896770232,"sku":"B0BTP31NHS","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-adapter-front-view_365acff5-d10f-4037-bfdf-d4709c46e660.jpg?v=1790554197"},{"product_id":"hooshing-garden-hose-adapter-1-2-npt-male-to-3-4-ght-female-2pcs-solid-brass-leak-resistant","title":"Hooshing Garden Hose Adapter 1\/2\" NPT Male to 3\/4\" GHT Female 2PCS Solid Brass Leak-Resistant","description":"\u003cb\u003eHooshing's 2-piece brass adapter set converts a 1\/2\" NPT male thread to a standard 3\/4\" garden hose thread (GHT) female for leak-resistant connections.\u003c\/b\u003e\n\n\u003cp\u003eIf you need to join a plumbing fitting or appliance with a 1\/2\" NPT outlet to a standard garden hose, this pair of Hooshing adapters provides a compact, solid-brass solution. Each connector is machined to mate NPT pipe threads with 3\/4\" GHT hose threads, so you can attach hoses, sprayers, faucets, or portable cleaning tools without improvising with clamps or tape. The set includes two identical adapters, giving you a spare or allowing multiple connections in a yard, workshop, or on mobile equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter make different threads fit together?\u003c\/h3\u003e\n\u003cp\u003eThe adapter bridges two common thread standards: National Pipe Thread (NPT) used on many plumbing outlets, and Garden Hose Thread (GHT) used on hoses and outdoor fittings. Its female GHT side accepts a standard garden hose, while the male NPT side screws into a 1\/2\" NPT female port. The result is a direct, stable coupling without bending or forcing incompatible fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFemale 3\/4\" GHT accepts standard garden hoses and watering accessories.\u003c\/li\u003e\n  \u003cli\u003eMale 1\/2\" NPT screws into most half-inch pipe or faucet outlets.\u003c\/li\u003e\n  \u003cli\u003ePrecision machining ensures threads align and seat properly for a tight fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the material reliable for outdoor and frequent use?\u003c\/h3\u003e\n\u003cp\u003eHooshing made the adapters from solid brass to resist corrosion and mechanical wear common in outdoor plumbing. Brass tolerates exposure to water and typical garden chemicals better than many alloys, and it won’t easily deform under normal tightening. That makes these adapters a practical choice for repeated assembly and disassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty brass body resists rust and maintains thread integrity.\u003c\/li\u003e\n  \u003cli\u003eDurable finish stands up to garden, patio, and workshop environments.\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated connections without cracking or stripping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the connection leak and how do I reduce the risk?\u003c\/h3\u003e\n\u003cp\u003eThe adapters are manufactured with close tolerances to minimize leakage when properly installed. To further reduce seepage, hand-tighten then use a wrench only as needed; adding a compatible thread sealant or plumber's tape on the NPT side is a common, safe practice. Inspect rubber washers or hose gaskets on the hose side and replace if worn to ensure a watertight seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-cut threads help create a snug, low-leak joint.\u003c\/li\u003e\n  \u003cli\u003eUse PTFE tape or pipe sealant on the 1\/2\" NPT male thread for best results.\u003c\/li\u003e\n  \u003cli\u003eCheck or replace hose washers to prevent hose-side drips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat typical applications will this adapter work for?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are versatile for home, garden, and light commercial tasks where you must join dissimilar fittings. They work well for attaching hoses to spigots, rinsing equipment, temporary watering systems, or connecting portable cleaners to fixed plumbing outlets. Because they come as a two-pack, you can set up two stations or keep a spare on hand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect garden hoses to half-inch plumbing outlets or faucets.\u003c\/li\u003e\n  \u003cli\u003eUse with pressure washers, portable pumps, or rinse nozzles that accept hose threads.\u003c\/li\u003e\n  \u003cli\u003eIdeal for workshops, RV hookups, and seasonal irrigation setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 2PCS adapter set is intended for homeowners, landscapers, DIYers, and anyone who needs a durable, straightforward way to join 1\/2\" NPT plumbing ports to standard garden hoses. If you require corrosion resistance, reliable thread engagement, and a compact coupling you can install without custom parts, these brass adapters provide a low-cost, long-lasting option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use plumber's tape on the NPT side?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Applying PTFE tape on the 1\/2\" NPT male threads helps seal the joint and reduce leaks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit every garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits standard 3\/4\" GHT garden hoses; check your hose thread type if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192896901304,"sku":"B0BWSXZCW9","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-adapter-front-view_93c91920-d7ac-41ca-beb4-329c9924cc17.jpg?v=1790554198"},{"product_id":"hooshing-garden-hose-connector-3-4-barb-to-3-4-ght-female-2pcs-solid-brass-with-clamps-gaskets","title":"Hooshing Garden Hose Connector 3\/4\" Barb to 3\/4\" GHT Female — 2PCS Solid Brass with Clamps \u0026 Gaskets","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS 3\/4\" barb to 3\/4\" GHT female hose connector is a solid-brass repair adapter that joins or mends 3\/4\" garden hoses and provides a threaded GHT female outlet for nozzles, faucets, and accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a hose tears, a fitting leaks, or you need to add a threaded garden accessory, a compact, durable hose mender saves time and money. These Hooshing adapters combine a 3\/4\" barb for inserting into cut hose with a 3\/4\" GHT (garden hose thread) female fitting so you can quickly restore water flow and attach standard threaded nozzles, sprinklers, filters, or quick-connect couplers. Each kit includes stainless-steel hose clamps and rubber gaskets for a tighter seal and longer life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this connector to repair a damaged hose?\u003c\/h3\u003e\n\u003cp\u003eRepairing a hose is straightforward: trim the damaged portion, push the brass barb into the hose bore, seat the gasket, and tighten the supplied stainless-steel clamp to lock everything in place. The GHT female threading gives you immediate compatibility with most garden fittings without additional adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut hose squarely at the damage point for best fit\u003c\/li\u003e\n  \u003cli\u003eInsert the 3\/4\" barb fully until the gasket rests against the hose end\u003c\/li\u003e\n  \u003cli\u003ePosition clamp over barb area and tighten with a screwdriver\u003c\/li\u003e\n  \u003cli\u003eScrew your nozzle, sprinkler, or faucet attachment onto the 3\/4\" GHT female\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material and build quality can I expect for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eHooshing connectors are machined from solid brass, providing strong corrosion resistance and durability compared with cheaper plastics. The included stainless-steel clamps resist rust and maintain clamping force, while the gasket helps prevent drips under normal garden water pressures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for weather resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps to avoid corrosion at the clamp point\u003c\/li\u003e\n  \u003cli\u003eRubber gasket for improved sealing against leaks\u003c\/li\u003e\n  \u003cli\u003eSuitable for typical outdoor watering pressures and seasonal use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this connector fit my hose and accessories?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is sized for hoses with a 3\/4\" (19 mm) internal barb diameter and accepts standard 3\/4\" garden-hose-thread (GHT) female fittings. It is ideal when you need continuity between plain-barbed hose ends and threaded garden accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBarb diameter: 3\/4\" (approx. 19 mm) for compatible hoses\u003c\/li\u003e\n  \u003cli\u003eThread: standard 3\/4\" GHT female — fits common nozzles and sprinklers\u003c\/li\u003e\n  \u003cli\u003eWorks with faucets, sprayers, filters, nozzles and quick-connects\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-piece set with clamps and gaskets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the repair last and how do I maintain it?\u003c\/h3\u003e\n\u003cp\u003eA properly installed connector can last multiple seasons; lifespan depends on water pressure, sunlight exposure, and wintering practices. To prolong service, avoid kinking near the joint, drain the hose for winter storage, and inspect clamps periodically for tightness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect clamps after heavy use and re-tighten if needed\u003c\/li\u003e\n  \u003cli\u003eDrain and store hoses indoors through freezing months\u003c\/li\u003e\n  \u003cli\u003eReplace the gasket if you detect persistent dripping\u003c\/li\u003e\n  \u003cli\u003eUse in-line strain relief or hose guides to reduce stress on the joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Home gardeners, landscapers, rental property managers, and anyone who maintains outdoor water systems will find these Hooshing hose menders useful. They’re a practical, affordable fix for torn hoses, a convenient way to convert a plain hose end to a threaded outlet, and a helpful spare for workshops or utility sheds. The 2-pack format keeps one for immediate repair and one as a backup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit all 3\/4\" garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits hoses with a 3\/4\" (19 mm) internal barb diameter and accepts standard 3\/4\" GHT threaded accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps rustproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included clamps are stainless steel, designed to resist rust during normal outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192917905592,"sku":"B0DFBMWZNG","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-connector-front-view.jpg?v=1790554385"},{"product_id":"hooshing-garden-hose-adapters-2pcs-3-8in-barb-to-3-4in-ght-male-solid-brass-with-clamps-gaskets","title":"Hooshing Garden Hose Adapters 2PCS 3\/8in Barb to 3\/4in GHT Male — Solid Brass with Clamps \u0026 Gaskets","description":"\u003cp\u003e\u003cstrong\u003eHooshing's 2PCS brass adapters convert 3\/8\" ID hoses to 3\/4\" GHT male threads for quick, leak-resistant outdoor watering connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two brass hose fittings let you link small-diameter tubing to standard garden hose threads without specialty tools. Each connector features a 3\/8\" (10mm) barb on one end for push-on or clamped hoses and a 3\/4\" GHT male thread on the other to mate with faucets, sprinklers, timers, and most garden hose accessories. The pack comes complete with gaskets and stainless-steel clamps to reinforce the seal and extend service life for irrigation, car washing, and general outdoor water use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters attach to my hose and faucet?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: push the hose onto the 3\/8\" barb, secure it with the included stainless-steel clamp, and screw the 3\/4\" male GHT into the matching female garden hose fitting. The gasket inside the threaded end prevents drips under normal household water pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" barb fits hoses with 10mm outer diameter or 3\/8\" ID\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT male thread mates with standard garden hose female couplers\u003c\/li\u003e\n  \u003cli\u003eIncluded gasket reduces leaks at threaded joint\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamp provides a firmer hose-to-barb connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from Hooshing adapters?\u003c\/h3\u003e\n\u003cp\u003eThese connectors are machined from solid brass for corrosion resistance and mechanical strength in outdoor environments. Brass resists rust and maintains a tight seal across temperature changes better than many plated metals, giving longer reliable service for lawn and garden systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body resists oxidation and wear\u003c\/li\u003e\n  \u003cli\u003eLow magnetic permeability and high temperature tolerance\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps included for added longevity\u003c\/li\u003e\n  \u003cli\u003eReplaceable gasket for ongoing leak prevention\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tasks and fittings are these adapters compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are designed to bridge small tubing and standard garden hose components, making them useful for hydrants, sprinklers, timers, filters, and quick-connect nozzles. They also function as effective menders for damaged hose ends when a simple splice is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect to outdoor faucets, splitters, and sprinkler heads\u003c\/li\u003e\n  \u003cli\u003eWorks with garden filters, timers, and spray nozzles\u003c\/li\u003e\n  \u003cli\u003eSuitable for hose repair and mender applications\u003c\/li\u003e\n  \u003cli\u003eGood for light irrigation, car washing, and pressure-tolerant systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain and store these connectors to prevent leaks?\u003c\/h3\u003e\n\u003cp\u003eRinse and dry the fittings after exposure to fertilizer or chlorinated water, inspect gaskets periodically, and swap clamps or washers if you notice seepage. Store indoors or in a dry toolbox during freezing weather to avoid trapped water expanding inside the brass thread or barb.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck and replace gaskets if hardened or cracked\u003c\/li\u003e\n  \u003cli\u003eHand-tighten GHT threads; avoid over-torquing which can damage seals\u003c\/li\u003e\n  \u003cli\u003eRemove fittings from hoses for winter storage to prevent freeze damage\u003c\/li\u003e\n  \u003cli\u003eClean mineral buildup with vinegar to preserve thread sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Home gardeners, handymen, and anyone who needs a compact, durable way to join 3\/8\" hoses to standard garden hose threads will find these Hooshing brass adapters useful. They suit weekend DIY repairs, temporary irrigation setups, and homeowners upgrading small-diameter tubing to work with common garden hose accessories. Each two-piece set includes gaskets and stainless clamps so you can install them right away.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 3\/8\" barb fit my hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the barb is 10mm OD designed for hoses with a 3\/8\" (approximately 10mm) inner diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are gaskets and clamps included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each 2-piece set ships with rubber gaskets and stainless-steel clamps for better sealing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192937828536,"sku":"B0CWQYPZ2B","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-2pcs-adapters.jpg?v=1790555092"},{"product_id":"hooshing-3-8-garden-hose-repair-kit-male-female-3-4-ght-brass-fittings-with-clamps","title":"Hooshing 3\/8\" Garden Hose Repair Kit — Male \u0026 Female 3\/4\" GHT Brass Fittings with Clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 3\/8\" Garden Hose Repair Kit is a pair of solid-brass barb-to-GHT fittings (male and female) that let you quickly repair or join 3\/8\" ID hoses to standard 3\/4\" GHT garden connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace torn hose ends or adapt small-diameter tubing to common garden-threaded accessories without fuss. These durable brass hose menders convert a 3\/8\" inner-diameter hose to a 3\/4\" garden hose thread (GHT) using a barbed insert, preinstalled gaskets, and stainless-steel clamps for a leak-resistant connection. The kit includes one male and one female 3\/4\" GHT fitting, making it easy to repair both inlet and outlet ends or join hoses and accessories like sprinklers, timers, or nozzles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use these fittings to repair a torn 3\/8\" hose?\u003c\/h3\u003e\n\u003cp\u003eRepairing a cut or split hose end is straightforward: trim the damaged section cleanly, push the hose onto the 3\/8\" barb as far as it will go, secure with the included stainless clamp, and thread the GHT end onto your garden accessory. The included rubber gaskets improve sealing against leakage when tightened properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim hose squarely for a secure fit\u003c\/li\u003e\n  \u003cli\u003ePush hose fully onto the 3\/8\" (10mm) barb\u003c\/li\u003e\n  \u003cli\u003eTighten supplied stainless clamp with screwdriver\u003c\/li\u003e\n  \u003cli\u003eUse included gasket in the 3\/4\" GHT coupling for leak prevention\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fittings fit my hose and garden tools?\u003c\/h3\u003e\n\u003cp\u003eThe barb side is designed for hoses with a 3\/8\" (10 mm) inner diameter; the threaded end uses a standard 3\/4\" GHT that matches most outdoor faucets, sprinklers, timers and nozzle fittings. Check your hose ID before buying to ensure compatibility with the 3\/8\" barb.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBarb OD: 10 mm, for 3\/8\" ID hoses\u003c\/li\u003e\n  \u003cli\u003eThread: standard 3\/4\" garden hose thread (GHT)\u003c\/li\u003e\n  \u003cli\u003ePairs with faucets, splitters, filters, timers, and spray nozzles\u003c\/li\u003e\n  \u003cli\u003eIncludes both male and female GHT options for flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Hooshing fittings durable and leak-resistant?\u003c\/h3\u003e\n\u003cp\u003eEach fitting is machined from solid brass for corrosion resistance, temperature tolerance, and long service life versus plastic alternatives. The kit provides compression-grade rubber gaskets and stainless-steel hose clamps to reduce seepage at both the threaded and barbed connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for strength and low corrosion\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps resist rust and maintain clamp force\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets improve sealing on 3\/4\" GHT connections\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand outdoor watering conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly can I connect these to existing garden systems?\u003c\/h3\u003e\n\u003cp\u003eMost users can complete a repair or adaptation in minutes with common hand tools: a pair of scissors or utility knife and a screwdriver to tighten the clamp. No specialized equipment or thread tape is normally required thanks to the gasketed GHT ends and barbed hose interface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick installation—typically under 10 minutes\u003c\/li\u003e\n  \u003cli\u003eOnly basic tools needed: cutter and screwdriver\u003c\/li\u003e\n  \u003cli\u003eGasketed GHT reduces need for additional sealing materials\u003c\/li\u003e\n  \u003cli\u003eKit includes both male and female menders for immediate use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 3\/8\" Garden Hose Repair Kit is ideal for gardeners, landscapers, and homeowners who need a fast, affordable way to fix or adapt small-diameter hoses to standard garden-threaded equipment. It's suited for anyone repairing irrigation lines, connecting tubing to timers or filters, or replacing worn hose ends with a durable brass solution that stays reliable outdoors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit 3\/8\" inner diameter hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The barb is 10 mm (3\/8\" ID) and intended for hoses with that inner diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps and gaskets included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes rubber gaskets and stainless-steel clamps for sealing and fastening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192946774200,"sku":"B0CWQWB59F","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-garden-hose-repair-kit.jpg?v=1790555535"},{"product_id":"hooshing-pol-to-qcc1-brass-adapter-for-propane-tanks-tool-free-leak-resistant","title":"Hooshing POL-to-QCC1 Brass Adapter for Propane Tanks — Tool-Free, Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing's brass propane adapter converts a POL LP tank service valve to a QCC1\/Type 1 quick-connect so you can safely use modern regulators and hoses with older tanks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a larger, older-style POL (left-hand thread) propane cylinder but want to attach a newer quick-connect regulator or hose, this adapter provides a straightforward, durable solution. Machined from heavy-duty brass and designed for repeated outdoor use, the adapter creates a secure, leak-resistant link between legacy tanks and contemporary QCC1 fittings used on grills, RVs, patio heaters, and many camping appliances.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter make older propane tanks compatible with new regulators?\u003c\/h3\u003e\n\u003cp\u003eThe Hooshing adapter threads onto the POL LP tank service valve and presents a QCC1 (Type 1) quick-connect outlet, letting you attach modern hoses and regulators without changing the tank. Installation is tool-free and designed for hand tightening while maintaining a tight seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts POL (left-hand thread) service valve to QCC1 quick-connect.\u003c\/li\u003e\n  \u003cli\u003eThreaded connection for a secure mechanical fit.\u003c\/li\u003e\n  \u003cli\u003eQuick-connect outlet accepts standard Type 1 regulators and hoses.\u003c\/li\u003e\n  \u003cli\u003eTool-free, hand-grip body for fast attachment and removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the adapter safe and built to last for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-quality brass, the adapter resists corrosion and handles repeated connects and disconnects without deforming. Its heavier build helps reduce the risk of leaks and damage from everyday outdoor handling when used correctly with compatible regulators and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for corrosion resistance outdoors.\u003c\/li\u003e\n  \u003cli\u003eDurable machining minimizes wear on threads and seals.\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain a leak-resistant connection when properly installed.\u003c\/li\u003e\n  \u003cli\u003eCompact, rugged shape for camping and BBQ environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you install and use the POL-to-QCC1 adapter on a propane tank?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple: ensure the tank valve is closed, screw the adapter onto the POL valve by hand until snug, then attach the QCC1 regulator or hose to the adapter's quick-connect outlet. Open the tank valve and check connections for leaks before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClose propane tank valve before starting installation.\u003c\/li\u003e\n  \u003cli\u003eHand-thread adapter onto POL service valve until firm; no tools required.\u003c\/li\u003e\n  \u003cli\u003eAttach QCC1 regulator\/hose to the quick-connect end until it locks.\u003c\/li\u003e\n  \u003cli\u003eOpen valve and test connections with soapy water for bubbles (no open flame).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications and appliances work with this conversion adapter?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is designed for a wide range of portable propane gear that uses QCC1\/Type 1 quick-connects. It is especially handy for backyard grills, camping stoves, portable heaters, and other outdoor cooking or heating equipment when you want to keep using a larger POL cylinder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHome and backyard gas grills that use QCC1 regulators.\u003c\/li\u003e\n  \u003cli\u003eCamping stoves, lanterns, and portable heaters with Type 1 connectors.\u003c\/li\u003e\n  \u003cli\u003eRV or trailer appliances when a quick-connect regulator is required.\u003c\/li\u003e\n  \u003cli\u003eOutdoor cooking setups where larger LP cylinders are preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing POL-to-QCC1 propane adapter is for homeowners, campers, and outdoor cooks who own larger, older POL LP cylinders but want the convenience and compatibility of modern QCC1 quick-connect regulators. It's a practical accessory if you prefer bulk tank capacity but need to connect contemporary hoses or regulators safely and without modifying the tank itself. Follow all manufacturer instructions for your tank and regulator, and perform routine leak checks after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter work with any POL propane tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits standard POL (left-hand thread) LP tank service valves and converts them to QCC1 quick-connects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools required; hand-tighten onto the POL valve, attach your QCC1 regulator, then check for leaks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192947232952,"sku":"B07XKXHZMY","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-adapter-front-view_00d89da7-70d9-476f-a751-1c836f1d290f.jpg?v=1790555559"},{"product_id":"hooshing-garden-hose-adapter-3-4-npt-to-3-4-ght-brass-solid-brass-with-rubber-gasket-leak-resistant","title":"Hooshing Garden Hose Adapter 3\/4\" NPT to 3\/4\" GHT Brass — Solid Brass with Rubber Gasket, Leak-Resistant","description":"\u003cstrong\u003eHooshing's brass 3\/4\" NPT male to 3\/4\" GHT female garden hose adapter is a durable connector that joins NPT-threaded equipment to standard garden hoses for reliable, leak-resistant water flow.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact brass adapter converts a 3\/4\" NPT male thread to a 3\/4\" GHT female hose connection, making it useful in deionized water setups, outdoor irrigation, pressure washing, and general household water tasks. Made from solid brass with precision-cut threads and a rubber gasket, it resists corrosion and handles typical residential water pressures while simplifying hose attachment and removal.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter ensure a secure, leak-resistant connection?\u003c\/h3\u003e\n\u003cp\u003eThe adapter uses accurately machined threads and an integrated rubber gasket to create a tight seal between NPT equipment and GHT hoses. Proper tightening aligns the threads and compresses the gasket to minimize drips and seepage under normal water pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-cut 3\/4\" NPT male and 3\/4\" GHT female threads\u003c\/li\u003e\n  \u003cli\u003eIncluded rubber gasket for improved sealing\u003c\/li\u003e\n  \u003cli\u003eSolid brass construction resists corrosion that can cause leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my garden hose or water-treatment device?\u003c\/h3\u003e\n\u003cp\u003eThe connector’s nominal size is 3\/4\", matching common garden hose threads (GHT) and standard 3\/4\" NPT fittings used on many pumps and filter housings. Because nominal pipe sizes can be confusing, verify the thread type (GHT vs NPT) and check actual dimensions before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" GHT female accepts standard garden hose fittings\u003c\/li\u003e\n  \u003cli\u003e3\/4\" NPT male mates with compatible threaded equipment\u003c\/li\u003e\n  \u003cli\u003eInner\/outer dimensions about 1\" x 1\" as a reference point\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is this brass adapter?\u003c\/h3\u003e\n\u003cp\u003eBrass is chosen for outdoor fittings because it tolerates moisture, resists rust, and withstands repeated use better than many plated metals. This adapter is built for routine garden and cleaning applications, maintaining functional threads and sealing surfaces over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for long service life outdoors\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance suited to wet environments\u003c\/li\u003e\n  \u003cli\u003eRobust threads preserve performance after repeated installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and use with existing hoses?\u003c\/h3\u003e\n\u003cp\u003eThe adapter installs by hand rotation for quick hookup; the swivel-style design helps align connections during assembly but locks when tightened for a secure fit. No special tools are required for most household installations, though a wrench can be used for a snugger seal if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tightenable swivel design for flexible alignment\u003c\/li\u003e\n  \u003cli\u003eCan be secured with a wrench for extra tightness\u003c\/li\u003e\n  \u003cli\u003eReady to use with supplied rubber gasket for sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: DIYers, landscapers, and homeowners who need a reliable brass adapter to connect garden hoses to NPT-threaded pumps, filters, or water-treatment components. It’s suited for anyone seeking a corrosion-resistant, easy-to-install connector for outdoor watering, car washing, and equipment hookups where a 3\/4\" GHT-to-3\/4\" NPT transition is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter compatible with standard garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The female side is 3\/4\" GHT, compatible with common garden hose fittings; verify your hose thread matches GHT.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter include a seal to prevent leaks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships with a rubber gasket to improve sealing between the NPT and GHT connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192954900664,"sku":"B0F28LQ22M","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-adapter-front-view_2a916ed9-ba90-4235-9327-1c6ede5b3663.jpg?v=1790555904"},{"product_id":"hooshing-3-8-inch-garden-hose-repair-kit-male-female-mender-connectors-brass-clamps","title":"Hooshing 3\/8-inch Garden Hose Repair Kit — Male \u0026 Female Mender Connectors, Brass \u0026 Clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing’s 3\/8\" Garden Hose Repair Kit is a compact brass repair set with male and female mender connectors, gaskets and stainless-steel clamps to restore 3\/8\" (10mm) garden hoses quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is built for fast in-field hose repairs and simple connector upgrades. Each kit contains a 3\/8\" barb to 3\/4\" female hose thread (FHT) and a 3\/8\" barb to 3\/4\" male hose thread (MHT), plus rubber gaskets and adjustable stainless-steel clamps. The heavy-duty brass fittings resist corrosion while the clamps provide a secure mechanical hold — together they let you fix leaks, join sections, or attach accessories without replacing entire hoses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit fix a torn 3\/8\" garden hose?\u003c\/h3\u003e\n\u003cp\u003eRepairing a sliced or split 3\/8\" hose is straightforward: trim the damaged section, insert the 3\/8\" barb, and tighten the stainless clamp to form a watertight seal. The included rubber gasket cushions the connection and helps prevent dripping at threaded joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim hose ends square for a snug fit\u003c\/li\u003e\n  \u003cli\u003ePush hose onto the 10mm (0.38\") barb fully\u003c\/li\u003e\n  \u003cli\u003eFit gasket for threaded connections\u003c\/li\u003e\n  \u003cli\u003eTighten the stainless-steel clamp firmly but not over-tighten\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these connectors fit my standard garden fittings and accessories?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit uses standard 3\/4\" garden hose threads (GHT) so the male and female pieces attach directly to common outdoor faucets, sprinklers, timers and spray nozzles. The 3\/8\" barb side matches hoses and tubing with an inner diameter close to 10mm, making it versatile for small-line watering and drip systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility with 3\/4\" GHT outdoor faucets and accessories\u003c\/li\u003e\n  \u003cli\u003e3\/8\" (10mm) barb fits small garden hose and drip tubing\u003c\/li\u003e\n  \u003cli\u003eWorks with timers, filters, splitters and nozzles\u003c\/li\u003e\n  \u003cli\u003eGood for temporary or permanent repairs and retrofit jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability should I expect from the parts?\u003c\/h3\u003e\n\u003cp\u003eThe fittings are machined from heavy-duty brass to resist rust and corrosion from regular outdoor use. Clamps are stainless steel to maintain clamping force over time and the rubber gaskets help preserve a leak-free threaded seal under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass fittings for long-term corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps resist bending and rust\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets reduce leakage at threaded joints\u003c\/li\u003e\n  \u003cli\u003eRobust enough for routine garden and irrigation tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIY gardener?\u003c\/h3\u003e\n\u003cp\u003eInstalling the Hooshing repair connectors requires only basic tools and a few minutes. No specialty skills are necessary: basic cutting, pushing, and tightening steps make this kit ideal for homeowners and landscapers who prefer on-the-spot fixes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOnly a utility knife and screwdriver or nut driver needed\u003c\/li\u003e\n  \u003cli\u003eQuick push-fit onto the barb and clamp-down for sealing\u003c\/li\u003e\n  \u003cli\u003eNo permanent glue or soldering required\u003c\/li\u003e\n  \u003cli\u003eRemovable and replaceable parts for future maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Gardeners, landscapers, and homeowners who use small-diameter hoses or drip lines will find this Hooshing repair kit handy for quick fixes and connector upgrades. It’s also useful for anyone managing sprinkler add-ons, timers, or compact irrigation lines who needs a durable, easy-to-install mender without replacing long hose runs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit all garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits hoses and tubing with a 3\/8\" (10mm) inner diameter and standard 3\/4\" GHT accessories; not for larger-diameter hoses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools required to install the mender?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic tools like a utility knife and screwdriver or nut driver are recommended to trim the hose and tighten clamps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54192960503992,"sku":"B0CX4Q17DV","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-3-8-brass-connector.jpg?v=1790556136"},{"product_id":"hooshing-3-4-barb-to-3-4-ght-male-hose-adapter-2-pack-brass-with-clamps-gaskets","title":"Hooshing 3\/4\" Barb to 3\/4\" GHT Male Hose Adapter — 2-Pack Brass with Clamps \u0026 Gaskets","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS 3\/4\" Barb x 3\/4\" GHT male adapters are brass hose connectors that join 3\/4\" ID flexible hose to standard 3\/4\" garden hose threaded fittings for reliable outdoor water connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two-piece hose adapters convert a 3\/4\" inner-diameter flexible hose to a 3\/4\" garden hose thread (GHT) male connector. Made from solid brass and supplied with gaskets and stainless-steel clamps, they are built to create a tight seal with common watering equipment—sprinklers, timers, spigots, filters and spray nozzles. The adapters are compact, easy to install, and useful for repairs or new hose setups around the yard.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install the Hooshing 3\/4\" barb to GHT adapter?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires only basic tools: push the hose onto the 3\/4\" (19mm OD) barb, position the included stainless-steel clamp over the hose end, and tighten to secure the connection. Thread the male GHT into the female garden-hose fitting and add the rubber gasket for a watertight seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-fit the hose onto the 19mm barb for a snug grip\u003c\/li\u003e\n  \u003cli\u003eUse supplied stainless-steel clamps tightened with a screwdriver\u003c\/li\u003e\n  \u003cli\u003eInsert supplied gasket into the GHT thread for leak prevention\u003c\/li\u003e\n  \u003cli\u003eHand-tighten the GHT, finish with a quarter-turn using a wrench if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these adapters fit my existing garden watering equipment?\u003c\/h3\u003e\n\u003cp\u003eThe male thread is a standard 3\/4\" Garden Hose Thread (GHT), which is compatible with most outdoor faucets, sprinklers, splitters, timers and nozzles that accept a male GHT. The barb side fits hoses with an inner diameter of about 3\/4\" (fitment based on the 19mm outer diameter of the barb).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with common garden faucets and threaded sprinklers\u003c\/li\u003e\n  \u003cli\u003eAttach to hose filters, timers and spray nozzles easily\u003c\/li\u003e\n  \u003cli\u003eBest suited for flexible hoses with 3\/4\" ID\u003c\/li\u003e\n  \u003cli\u003eIncludes gaskets to ensure compatibility with threaded fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these adapters offer?\u003c\/h3\u003e\n\u003cp\u003eEach adapter is machined from solid brass, chosen for corrosion resistance and long-term outdoor use. The package includes rubber gaskets and stainless-steel clamps to reinforce sealing and resist rust, making them suitable for repeated connections and seasonal storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body resists corrosion and deformation\u003c\/li\u003e\n  \u003cli\u003eLow magnetic permeability and heat tolerance for durability\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps resist rust and maintain clamp force\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets improve leak resistance at threaded joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these adapters be used to repair a torn hose?\u003c\/h3\u003e\n\u003cp\u003eYes—these adapters are handy for hose repairs and mending sections where threads or fittings failed. By cutting out the damaged area and securing the hose to the barb with the clamp, you restore a functional connection without replacing the whole hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut out damaged hose section and slide hose onto barb\u003c\/li\u003e\n  \u003cli\u003eClamp firmly to prevent slippage under pressure\u003c\/li\u003e\n  \u003cli\u003eReattach threaded GHT fittings to resume normal use\u003c\/li\u003e\n  \u003cli\u003eTwo adapters in the pack provide spare or dual-repair options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, gardeners, and DIYers who need a compact, dependable way to link 3\/4\" ID flexible hose to standard garden-hose threaded fittings. This kit suits anyone repairing hoses, connecting non-threaded tubing to threaded watering devices, or building a custom backyard watering system with durable, easy-to-install brass fittings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these adapters fit a 3\/4 inch garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the male thread is standard 3\/4\" GHT and fits most garden hose fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps and gaskets included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the pack includes rubber gaskets and stainless-steel clamps for secure seals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193028989112,"sku":"B0D2274QRH","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-brass-adapter-pack.jpg?v=1790557025"},{"product_id":"hooshing-brass-garden-hose-adapter-1-4-npt-male-to-3-4-ght-female-solid-brass-leak-resistant-with-rubber-gasket","title":"Hooshing brass garden hose adapter 1\/4 NPT male to 3\/4 GHT female — solid brass, leak-resistant with rubber gasket","description":"\u003cp\u003e\u003cstrong\u003eHooshing's brass garden hose adapter converts a 1\/4\" NPT male thread to a 3\/4\" GHT female connection for reliable, corrosion-resistant hookups in water treatment and garden applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact brass connector bridges the common 1\/4\" NPT fittings used on many filters and deionized water systems with standard 3\/4\" garden hose threads (GHT). Built from solid brass with precision-cut threads and included rubber gaskets, it eases assembly, helps prevent leaks and stands up to outdoor conditions and water pressure. The swivel-friendly design adds flexibility during installation, and its small dimensions make it a versatile component for residential or light-commercial setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this adapter fit my deionized water or filtration equipment?\u003c\/h3\u003e\n\u003cp\u003eThe adapter converts between a 1\/4\" NPT male thread and a standard 3\/4\" GHT female hose thread. Thread tolerances are manufactured to match common plumbing standards, and the package includes rubber gaskets to improve the seal between components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnection: 1\/4\" NPT male to 3\/4\" GHT female\u003c\/li\u003e\n  \u003cli\u003eApproximate outer dimensions: 1\" I.D. x 1\/2\" O.D.\u003c\/li\u003e\n  \u003cli\u003eComes with rubber gasket(s) for leak reduction\u003c\/li\u003e\n  \u003cli\u003eVerify actual thread type before ordering; nominal sizes represent pipe standards, not measured diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a brass adapter over other materials?\u003c\/h3\u003e\n\u003cp\u003eBrass is a preferred material for hose fittings due to its balance of strength, machinability and corrosion resistance. It resists rust and mineral buildup better than many plated or plastic alternatives, which helps preserve seal integrity and prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for long-term outdoor use\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance in wet environments\u003c\/li\u003e\n  \u003cli\u003eDurable under typical water pressures for garden and treatment systems\u003c\/li\u003e\n  \u003cli\u003ePrecision threads reduce cross-threading and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and seal without leaks?\u003c\/h3\u003e\n\u003cp\u003eThe adapter features a swivel-friendly profile that simplifies alignment during hookup; however, the swivel locks when fully tightened. Precision threads and included rubber gaskets help form a dependable seal—use proper hand-tightening and standard plumbing tape where appropriate for added security.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwivel design eases connection alignment\u003c\/li\u003e\n  \u003cli\u003eDoes not swivel under full torque once tightened\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets included to improve sealing performance\u003c\/li\u003e\n  \u003cli\u003eCompatible with common garden hoses, faucets and water treatment ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical uses can I expect for this adapter around the home or workshop?\u003c\/h3\u003e\n\u003cp\u003eThis compact connector is useful wherever a 1\/4\" NPT-equipped device needs a 3\/4\" garden hose supply. Typical applications include deionized water systems, portable filtration units, pressure washers, garden sprinklers and general water-transfer tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects filtration and DI systems to standard garden hoses\u003c\/li\u003e\n  \u003cli\u003eUseful for outdoor cleaning, car washing and gardening tools\u003c\/li\u003e\n  \u003cli\u003eWorks for temporary or permanent hose hookups\u003c\/li\u003e\n  \u003cli\u003eSmall footprint fits tight installation spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 1\/4\" NPT male x 3\/4\" GHT female brass adapter is aimed at DIYers, gardeners, hobbyists and professionals who need a durable, corrosion-resistant connector for water treatment equipment, filtration systems and standard garden-hose setups. If you require a compact, reliable transition between NPT-threaded devices and garden hose fittings, this adapter provides a low-cost, long-lasting solution—just confirm thread types and sizes before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter compatible with all 3\/4\" garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it mates to standard 3\/4\" GHT female garden hose threads, but confirm your device uses a 1\/4\" NPT male thread before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the swivel rotate when tightened?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The swivel design eases alignment, but it does not rotate under full tightening—use hand pressure and appropriate tape as needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193039573176,"sku":"B0F28L9N96","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view_1460848d-f983-405e-93f6-830b1436ab38.jpg?v=1790557150"},{"product_id":"hooshing-3-4-pex-to-3-4-ght-adapter-brass-pex-b-barb-to-female-garden-hose-with-rubber-gasket","title":"Hooshing 3\/4\" PEX to 3\/4\" GHT Adapter — Brass PEX B Barb to Female Garden Hose with Rubber Gasket","description":"\u003cp\u003e\u003cstrong\u003eThe Hooshing 3\/4\" PEX B barb to 3\/4\" GHT female brass adapter is a durable plumbing fitting that converts 3\/4\" PEX B tubing to a standard 3\/4\" garden-hose threaded connection for reliable outdoor water use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you are connecting a PEX supply line to a garden hose, attaching a pressure washer, or linking irrigation tubing to standard hose-thread fittings, this brass Hooshing adapter provides a simple, leak-resistant transition. Made from solid brass with a built-in rubber gasket, it resists corrosion and high temperatures while forming a tight seal between hose and tubing. The compact hex shape makes it easy to tighten with a wrench, and the barb end securely grips PEX tubing for a long-lasting joint.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter create a watertight connection?\u003c\/h3\u003e\n\u003cp\u003eThe adapter combines a barbed PEX interface with a female garden hose thread and an internal rubber gasket to prevent drips and seepage. Proper installation—pushing the PEX fully onto the barb and securing with a clamp or crimp—ensures the hose thread compresses against the gasket for a reliable seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" PEX B barb for a snug tubing grip\u003c\/li\u003e\n  \u003cli\u003e3\/4\" Female GHT thread matches common hose fittings\u003c\/li\u003e\n  \u003cli\u003eRubber gasket provides leak protection at the threaded end\u003c\/li\u003e\n  \u003cli\u003eUse with a hose clamp or PEX crimp for long-term security\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the material and build suitable for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eConstructed from solid brass, the adapter resists rust and corrosion that prematurely fail lesser metals. Brass tolerates outdoor temperature swings and contact with water without becoming brittle, while the hex body gives good grip for tightening and loosening during seasonal hookup or maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHigh temperature tolerance for hot-water or warm climates\u003c\/li\u003e\n  \u003cli\u003eHex profile fits standard wrenches for easy installation\u003c\/li\u003e\n  \u003cli\u003eLong service life compared with plated or plastic fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications and tools work best with this fitting?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is designed for versatile outdoor and light commercial water connections: garden hoses, pressure washers, boat shore connections, and landscape irrigation lines. For PEX B tubing use a compatible clamp or crimp ring; for the GHT end, hand-tighten then quarter-turn with a wrench if needed—do not overtighten the gasket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGarden watering and lawn irrigation systems\u003c\/li\u003e\n  \u003cli\u003eCar washing and pressure-washing hookups\u003c\/li\u003e\n  \u003cli\u003eBoat shore-water and dock lines using garden-hose threads\u003c\/li\u003e\n  \u003cli\u003eAttach with PEX crimp\/clamp tools and standard wrenches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain the connector for best performance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: push the PEX over the barb, secure with the appropriate clamp or crimp, then screw on the garden-hose threaded mating part until the rubber gasket seats. Periodic checks for tightness and signs of wear on the gasket will help prevent leaks and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFully insert PEX tubing onto the barb before clamping\u003c\/li\u003e\n  \u003cli\u003eUse the correct-size clamp or crimp tool for PEX B\u003c\/li\u003e\n  \u003cli\u003eInspect the rubber gasket and replace if cracked or compressed\u003c\/li\u003e\n  \u003cli\u003eStore dry when not in use to reduce mineral buildup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Hooshing 3\/4\" PEX B to 3\/4\" GHT female adapter is suited to DIY homeowners, landscapers, boat owners, and light-commercial contractors who need a dependable, corrosion-resistant link between PEX plumbing and garden-hose threaded equipment. If you want a compact brass converter that’s easy to fit and made to stand up to outdoor conditions, this adapter is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter fit any 3\/4\" PEX tubing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s made for standard 3\/4\" PEX B tubing; use the correct PEX clamp or crimp for secure attachment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need plumber's tape on the garden-hose thread?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—do not use tape on the GHT end; the built-in rubber gasket provides the seal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193064509624,"sku":"B0FQ2S669V","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view_602c60e7-ccf5-4d62-ad64-68fe91e791f1.jpg?v=1790557824"},{"product_id":"hooshing-garden-hose-adapters-2-pack-3-4in-npt-to-3-4in-ght-solid-brass-leak-resistant","title":"Hooshing garden hose adapters 2-pack 3\/4in NPT to 3\/4in GHT — solid brass, leak-resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS garden hose adapters convert a 3\/4\" NPT female pipe thread to a 3\/4\" GHT female garden hose connection, giving a durable brass solution for joining plumbing and watering equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of brass adapters is built to bridge differing female threads commonly encountered in outdoor water systems. Made from solid brass and supplied with rubber washers, the connectors are intended to prevent leaks, resist corrosion, and withstand routine outdoor use. They’re compact but sturdy, designed for gardeners, landscapers, and homeowners who need a reliable mechanical joiner between a standard NPT pipe outlet and a GHT garden hose fitting.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters fit my existing hose and faucet?\u003c\/h3\u003e\n\u003cp\u003eThe adapters are sized to match nominal 3\/4\" NPT female pipe threads on one side and 3\/4\" GHT (garden hose thread) female on the other. They act as a passive joiner so no special tools are required beyond hand-tightening and a wrench for a snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal threads: 3\/4\" NPT female to 3\/4\" GHT female.\u003c\/li\u003e\n  \u003cli\u003eInternal dimensions indicated as 1\" I.D. x 1\" I.D. for flow compatibility.\u003c\/li\u003e\n  \u003cli\u003eIncludes rubber washers to seat and reduce water leakage.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten then wrench to secure without over-torquing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure long-term performance?\u003c\/h3\u003e\n\u003cp\u003eEach adapter is machined from solid brass to provide corrosion resistance far superior to aluminum or most plastics used in garden fittings. Brass also resists deformation under normal tightening forces, which helps keep threads sealed over many connection cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for rust resistance and mechanical strength.\u003c\/li\u003e\n  \u003cli\u003ePrecision-threaded ends for reliable mating with compatible fittings.\u003c\/li\u003e\n  \u003cli\u003eWasher included to prevent spray or drip leaks at the joint.\u003c\/li\u003e\n  \u003cli\u003eManufactured under quality control standards to minimize defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these adapters for irrigation, pressure washers, or plumbing?\u003c\/h3\u003e\n\u003cp\u003eYes—these adapters work across a range of low- to moderate-pressure water uses where GHT and NPT interfaces must connect. They are suitable for garden hoses, drip irrigation systems, outdoor faucets, and many cleaning setups, but are not rated for high-pressure industrial hydraulic systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUseful for garden hoses, sprinklers, and watering systems.\u003c\/li\u003e\n  \u003cli\u003eCompatible with outdoor faucets that accept 3\/4\" NPT threads.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for high-pressure or pressurized steam applications.\u003c\/li\u003e\n  \u003cli\u003eCan be used to adapt cleaning tools that use standard garden threads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I prevent leaks and ensure a tight connection?\u003c\/h3\u003e\n\u003cp\u003eStart by inspecting and seating the supplied rubber washers; replace if worn. Hand-start threads to avoid cross-threading, tighten until snug, then use a wrench for a final quarter-turn—avoid excessive torque to prevent thread damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm washers are properly placed before assembly.\u003c\/li\u003e\n  \u003cli\u003eAlign threads and hand-thread first to avoid cross-threading.\u003c\/li\u003e\n  \u003cli\u003eTighten with a wrench only for final snugness; do not overtighten.\u003c\/li\u003e\n  \u003cli\u003eCheck for drips after pressurizing the line and re-tighten if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Hooshing adapters suit homeowners, landscapers, and handy DIYers who need a dependable, corrosion-resistant transition between 3\/4\" NPT and 3\/4\" garden hose fittings. If you maintain outdoor watering systems, attach accessories with mismatched threads, or retrofit plumbing to accept garden hoses, this compact brass pair offers a practical, long-lasting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these adapters fit any 3\/4\" hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit standard 3\/4\" GHT garden hoses and 3\/4\" NPT female pipes; confirm nominal thread types before using.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these adapters corrosion-resistant for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Made of solid brass, they resist rust and are suitable for typical outdoor watering setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193077944504,"sku":"B0BW5MWPH7","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view_ea62a533-7852-4467-9e90-799d15c37f55.jpg?v=1790558360"},{"product_id":"hooshing-brass-bell-fountain-nozzle-1-2in-dn15-3-4in-dn20-solid-brass-low-splash-mushroom-head","title":"Hooshing brass bell fountain nozzle 1\/2in DN15 \u0026 3\/4in DN20 — solid brass, low-splash mushroom head","description":"\u003cp\u003e\u003cstrong\u003eThe Hooshing brass bell fountain nozzle is a durable mushroom-style water head that produces a clear, low-splash water bell effect for small ponds, pools, and indoor water features.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact fountain nozzle combines solid brass construction with a simple threaded connection to deliver a soft, attractive water bell that minimizes spray and noise. Available with a 1\/2\" DN15 female thread and a 3\/4\" DN20 male thread, it suits a range of pump setups and is designed for low-pressure operation. The bell or \"mushroom\" geometry shapes the flow into a hollow dome of water that is visually pleasing and calming in sheltered locations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this nozzle create the bell-shaped water pattern?\u003c\/h3\u003e\n\u003cp\u003eThe bell nozzle's dome profile guides the discharged water into a cohesive sheet that forms a hollow, mushroom-like bell as it moves away from the outlet. Because the water maintains a uniform thickness across the surface, the pattern stays stable and produces minimal splatter and mist.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBell\/mushroom geometry forms a continuous water dome\u003c\/li\u003e\n  \u003cli\u003eDesigned for low working pressure (5–8 kPa) to keep the shape intact\u003c\/li\u003e\n  \u003cli\u003eFlow rates of 1–1.5 m³\/h maintain a full, even bell\u003c\/li\u003e\n  \u003cli\u003eJet spray height approximately 0.2 m suitable for small features\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and threading options are included and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThis nozzle is supplied with a 1\/2\" DN15 female thread and a 3\/4\" DN20 male thread to fit common plumbing and fountain fittings. The dual-thread design allows flexible installation with standard adapters, making it easier to integrate the nozzle into existing piping or a bespoke fountain assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" DN15 female thread for many pump outlets and adaptors\u003c\/li\u003e\n  \u003cli\u003e3\/4\" DN20 male thread for connection to larger fittings or risers\u003c\/li\u003e\n  \u003cli\u003eThread compatibility reduces need for custom plumbing parts\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits tight or decorative fountain housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and low-maintenance is the brass construction?\u003c\/h3\u003e\n\u003cp\u003eManufactured from solid brass, the nozzle resists corrosion and mechanical wear better than many plated or plastic alternatives. Its robust body tolerates regular use and the brass surface ages gracefully while remaining structurally sound, making it a long-lasting choice for both indoor and protected outdoor water features.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass material for corrosion resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eSmooth internal surfaces help reduce mineral buildup\u003c\/li\u003e\n  \u003cli\u003eEasy to clean and reassemble for occasional maintenance\u003c\/li\u003e\n  \u003cli\u003eSuitable for non-freezing, sheltered environments to extend life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere does this fountain head perform best?\u003c\/h3\u003e\n\u003cp\u003eThe bell nozzle excels in calm, wind-sheltered locations where the delicate water bell remains intact and audible. It’s particularly effective in small ponds, courtyard water gardens, indoor atriums, or poolside niches where minimal splash and gentle sound are desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall ornamental ponds and backyard water gardens\u003c\/li\u003e\n  \u003cli\u003eIndoor reception halls, lobbies, and conservatories\u003c\/li\u003e\n  \u003cli\u003eProtected outdoor pools and calm courtyard features\u003c\/li\u003e\n  \u003cli\u003eLocations prioritizing quiet operation and low splash\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Hooshing brass bell fountain nozzle is aimed at landscape installers, hobbyist pond owners, and interior designers seeking a compact, low-noise water feature head. Choose this nozzle if you need an attractive, easy-to-install solution that forms a pronounced but modest bell effect at low pressures, requires minimal maintenance, and integrates with standard 1\/2\" or 3\/4\" plumbing fittings. Avoid exposed, windy sites if you want the clearest bell pattern and lowest splash.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What water pressure does this nozzle need?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It performs best at low pressure—about 5–8 kPa—for a stable water bell shape.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this nozzle outdoors year-round?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use it outdoors in sheltered, non-freezing locations; avoid exposed windy sites for best performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193314332856,"sku":"B0B7BGKNFW","price":48.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-bell-nozzle-front-view.jpg?v=1790561169"},{"product_id":"hooshing-1lb-propane-quick-connect-adapter-brass-1-4-quick-to-3-8-flare-with-1-20-cylinder-adapter-high-pressure-rv-use","title":"Hooshing 1LB Propane Quick-Connect Adapter — Brass 1\/4\" Quick to 3\/8\" Flare with 1\"-20 Cylinder Adapter, High-Pressure RV Use","description":"\u003cp\u003e\u003cstrong\u003eHooshing's 1LB propane quick connect fitting adapts a 1\/4\" quick-connect plug to 3\/8\" flare connections so you can run portable 1 lb grills and stoves from an RV or larger propane cylinder.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact brass adapter set lets campers and tailgaters link small disposable-bottle appliances to onboard RV propane or to larger cylinders without moving heavy tanks. Built from solid brass for corrosion resistance, the fitting assembly converts between a 1\/4\" quick connect plug and 3\/8\" flare hose threads, and includes a 3\/8\" male flare x 1\"-20 male cylinder-thread adapter for wider compatibility. It’s designed for higher-pressure hose extensions; follow the manufacturer notes when connecting to regulator-equipped lines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this fitting let my 1 lb tabletop grill use my RV’s propane?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter converts the 1\/4\" quick connect interface found on many 1 lb bottle setups into a 3\/8\" flare connection that matches RV or larger cylinder fittings. Once you assemble and tighten the components, the barbecue or stove draws fuel from the RV tank through the adapter rather than relying on a small disposable bottle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConnects a 1\/4\" quick plug to a 3\/8\" flare female inlet.\u003c\/li\u003e\n  \u003cli\u003eIncludes 3\/8\" male flare to 1\"-20 cylinder-thread adapter for tank hookups.\u003c\/li\u003e\n  \u003cli\u003eSolid brass construction resists weather and wear.\u003c\/li\u003e\n  \u003cli\u003eDesigned for higher-pressure hose extension use only (not low-pressure regulator lines).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult for a camper or first-time user?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward and usually hand-tightened with a wrench for final seating. The parts thread together in a few turns and require only basic hand tools to secure. Always check connections for leaks with a soap-and-water solution before using.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo special tools required—hand-tighten then snug with a wrench.\u003c\/li\u003e\n  \u003cli\u003eQuick-connect plug mates easily to matching quick-release sockets.\u003c\/li\u003e\n  \u003cli\u003ePerform a leak check before lighting any appliance.\u003c\/li\u003e\n  \u003cli\u003eRemove the RV regulator if connecting to a 1 lb grill regulator to avoid low-pressure flame issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich appliances and tanks are compatible with this adapter?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter works with small portable grills, tabletop griddles, camping stoves, and other devices that accept a 1 lb quick-connect bottle, enabling them to run from RV onboard tanks or larger cylinders from 20–100 lb. It’s aimed at higher-pressure lines; it is not suitable for low-pressure hose extensions or direct connection to certain regulator systems without modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePortable gas grills, camping stoves, and tabletop griddles.\u003c\/li\u003e\n  \u003cli\u003eRV onboard propane tanks and 20–100 lb cylinders via standard fittings.\u003c\/li\u003e\n  \u003cli\u003eHigh-pressure hose extensions and direct feed setups (not for low-pressure regulators).\u003c\/li\u003e\n  \u003cli\u003eOutdoor cooking, tailgating, and campsite heating setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and setup tips should I follow when using this adapter?\u003c\/h3\u003e\n\n\u003cp\u003eUse the adapter only as intended and confirm compatibility with your appliance’s pressure requirements. If your grill has its own regulator, remove the RV regulator when attaching to prevent reduced flame output. Always inspect threads, tighten securely, and do a leak test after assembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCheck appliance and supply pressure compatibility before use.\u003c\/li\u003e\n  \u003cli\u003eRemove redundant regulators to avoid low flame problems.\u003c\/li\u003e\n  \u003cli\u003eInspect brass fittings for damage and confirm tight seals.\u003c\/li\u003e\n  \u003cli\u003ePerform a soap-and-water leak check after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this adapter is for: This Hooshing fitting is ideal for RV owners, campers, tailgaters, and outdoor cooks who want to power small 1 lb portable grills or stoves from an RV’s onboard tank or a larger cylinder. It suits users who need a durable, weather-resistant brass adapter for higher-pressure connections and who are comfortable checking compatibility and following basic safety checks before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this adapter connect a 1 lb grill to an RV tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It converts a 1\/4\" quick plug to 3\/8\" flare so many 1 lb grills can draw fuel from an RV or larger cylinder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove my RV regulator before using?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your grill has its own regulator, remove the RV regulator to prevent low-pressure small flame issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193329668280,"sku":"B0C7ZK1VS2","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-adapter-assembly.jpg?v=1790561395"},{"product_id":"hooshing-3-8-garden-hose-repair-kit-3-pack-brass-3-4-ght-male-female-connectors-with-clamps","title":"Hooshing 3\/8\" Garden Hose Repair Kit, 3-Pack — Brass 3\/4\" GHT Male \u0026 Female Connectors with Clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 3\/8\" Garden Hose Repair Kit is a six-piece brass connector set (three male and three female 3\/4\" GHT fittings) with gaskets and stainless-steel clamps for fast, leak-resistant repairs and connections to 3\/8\" (10mm) garden hoses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a compact, durable solution to fix a torn hose or adapt a 3\/8\" flexible tube to standard garden fittings, this kit supplies both male and female 3\/4\" garden hose thread (GHT) ends plus barbed 3\/8\" inserts and clamps. The fittings are heavy-duty brass for corrosion resistance, and each connector includes a gasket to help prevent drips at threaded joints. The stainless-steel clamps secure the hose to the barbed shank so you can restore water flow quickly without replacing entire lines.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these fittings repair a damaged 3\/8\" garden hose?\u003c\/h3\u003e\n\u003cp\u003eEach repair connector uses a barbed 3\/8\" insert that slides inside the cut hose end and a clamp that tightens around the outside. The barbs lock the tubing in place while the clamp compresses the hose to form a reliable mechanical seal. A threaded garden hose end then lets you reconnect to faucets, nozzles, splitters, or sprinkler accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" (10mm) barbed shank sized for common small garden hoses and tubing\u003c\/li\u003e\n  \u003cli\u003eIncluded stainless-steel clamps tighten with a screwdriver for a snug fit\u003c\/li\u003e\n  \u003cli\u003eBrass material resists rust and lasts longer than cheap alloys\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these connectors fit my existing outdoor faucets and accessories?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses standard 3\/4\" GHT (garden hose thread) male and female ends, which match most garden faucets, spray nozzles, timers, and hose splitters. If your appliance uses standard garden hose threading, the threaded ends will screw on and seal with the included gaskets. Measure your hose diameter to confirm the barbed 3\/8\" shaft is compatible before installing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" GHT thread fits common garden accessories and faucets\u003c\/li\u003e\n  \u003cli\u003eGaskets included to reduce leaks at the threaded connection\u003c\/li\u003e\n  \u003cli\u003eCheck that your hose inner diameter is ~3\/8\" (10mm) for correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these repair parts?\u003c\/h3\u003e\n\u003cp\u003eThe fittings are machined from heavy-duty brass for long-term corrosion resistance, and the clamps are stainless steel to withstand outdoor conditions. Brass maintains strength and resists rusting from exposure to water; stainless clamps resist stretching and corrosion, keeping the hose secured through seasonal use. Proper installation and periodic clamp re-tightening will preserve a leak-free connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass bodies resist corrosion better than plated or plastic parts\u003c\/li\u003e\n  \u003cli\u003eStainless-steel worm-drive clamps hold under pressure and temperature changes\u003c\/li\u003e\n  \u003cli\u003eThread gaskets help prevent drips where metal meets metal or plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation for DIY repairs?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires only basic tools: a utility knife to trim the hose, pliers to seat the barb if needed, and a screwdriver to tighten the clamp. Slide the barbed end into the hose, position the gasket in the threaded joint, and tighten the clamp evenly so the hose compresses around the barbs. The straightforward process makes these connectors a quick weekend fix for leaks or conversions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim hose squarely and insert barb fully for best hold\u003c\/li\u003e\n  \u003cli\u003eTighten clamp until the hose stops sliding but avoid over-torquing\u003c\/li\u003e\n  \u003cli\u003eTest under water pressure to confirm a watertight seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 3\/8\" Garden Hose Repair Kit is made for homeowners, gardeners, and DIYers who need an economical, durable way to repair small-diameter hoses or adapt 3\/8\" tubing to standard garden-threaded accessories. It’s ideal for patching irrigation lines, repairing lightweight hose runs, connecting to timers or filters, and keeping seasonal watering systems functional without replacing entire hoses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hose diameter does this kit fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The barbed shank fits 3\/8\" (10 mm) inner-diameter hoses; verify your hose ID before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps and gaskets included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set includes stainless-steel clamps and thread gaskets for each connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193390551224,"sku":"B0D53LG385","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-connectors.jpg?v=1790561743"},{"product_id":"hooshing-3-4-ght-to-3-8-compression-adapter-2-pack-brass-reducer-fittings-with-rubber-gaskets-hex-body-for-hose-supply-lines","title":"Hooshing 3\/4 GHT to 3\/8 Compression Adapter 2-Pack — Brass Reducer Fittings with Rubber Gaskets, Hex Body for Hose \u0026 Supply Lines","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS 3\/4 GHT Female to 3\/8 Compression Male fittings convert a 3\/4\" garden-hose-thread connection to a 3\/8\" compression water line quickly and securely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese brass reducer fittings are designed for homeowners, RV owners, and tradespeople who need a reliable adapter between common garden hose threads (3\/4\" GHT) and 3\/8\" compression male pipe ends. Built from corrosion-resistant brass with included rubber gaskets and deep-cut threads, the pair provides a simple way to join hoses, faucet lines, dishwasher connections, and other water lines without soldering or expensive replacements.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters make connecting different pipe sizes easier?\u003c\/h3\u003e\n\u003cp\u003eThe Hooshing adapters let you join a standard 3\/4\" garden hose thread to a 3\/8\" compression male line without modifying existing plumbing. They act as a physical reducer that preserves thread integrity and creates a water-tight joint when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" GHT female side fits common garden hoses and outdoor spigots.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" compression male side accepts compression fittings and supply lines.\u003c\/li\u003e\n  \u003cli\u003eIncluded rubber seal gasket reduces leak risk at the threaded joint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these fittings durable for outdoor and household use?\u003c\/h3\u003e\n\u003cp\u003eManufactured from quality brass, these fittings resist rust and corrosion better than many plated alternatives. The hex-shaped body and robust threads are built to withstand repeated connections and moderate wrench tightening for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for corrosion and temperature resistance.\u003c\/li\u003e\n  \u003cli\u003eDeep, clean-cut threads that maintain grip and minimize cross-threading.\u003c\/li\u003e\n  \u003cli\u003eHex design allows easy tightening with a standard wrench without stripping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how do I install them correctly?\u003c\/h3\u003e\n\u003cp\u003eYou receive two Hooshing reducer fittings and rubber sealing gaskets to help prevent leaks. Installation is straightforward: hand-tighten, then finish with a wrench; ensure the gasket is seated and the compression nut or tubing is prepared per the supply line instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes 2 brass adapters and rubber gaskets for each joint.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten first; use a wrench to snug the hex flats—avoid over-torquing.\u003c\/li\u003e\n  \u003cli\u003eCheck the compression connection or supply tubing is properly seated before pressurizing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications work best with these reducer fittings?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are intended for non-specialized water supply tasks where a garden hose thread must meet a 3\/8\" compression line. They suit many everyday connections but are not a substitute for dedicated plumbing valves or high-pressure industrial fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for RV hookups, outdoor faucets, and temporary garden hose to indoor supply conversions.\u003c\/li\u003e\n  \u003cli\u003eUseful for connecting dishwasher or faucet supply lines when sizes differ.\u003c\/li\u003e\n  \u003cli\u003eGood for quick repairs, testing, or retrofit plumbing where re-piping is impractical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, handymen, RV owners, and DIYers who need a compact, brass-bodied adapter to bridge a 3\/4\" garden-hose-thread connection and a 3\/8\" compression male line. If you want a rust-resistant, easy-to-install reducer for common water-line tasks—without reworking existing plumbing—these Hooshing fittings are a practical, economical choice. For permanent pressurized systems or specialized installations, consult a plumber to ensure compliance with local codes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these adapters leak if used outdoors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include rubber gaskets and deep threads to minimize leaks, but proper tightening and periodic checks are recommended for outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with high-pressure systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They suit typical household and RV water pressures; for high-pressure or code-critical systems, consult a plumbing professional.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193582014648,"sku":"B0F59KW3J5","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-adapter-pair.jpg?v=1790562583"},{"product_id":"hooshing-90-brass-garden-hose-elbow-3-4-ght-male-to-male-solid-brass-prevents-kinks","title":"Hooshing 90° Brass Garden Hose Elbow 3\/4\" GHT Male-to-Male, Solid Brass, Prevents Kinks","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS 90 Degree Garden Hose Elbow 3\/4\" GHT male-to-male connector is a solid-brass right-angle adapter that prevents hose kinks and simplifies tight faucet connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a spigot sits close to a wall or inside a recessed area, a straight hose connection can bend, crimp, or rub against rough surfaces. This compact elbow rotates the flow 90 degrees, reducing stress on the hose near the connection and making attachments like pressure washers, RV water lines, or garden nozzles easier to reach without forcing the hose into an awkward bend.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 90° elbow protect my hose and fittings?\u003c\/h3\u003e\n\u003cp\u003eThe right-angle design redirects the hose exit so it doesn’t have to fold sharply at the faucet, which lowers wear and the chance of leaks where threads and rubber meet. Because the adapter is made from solid brass, it also resists deformation and keeps a steady seal under normal outdoor use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates sharp bends at the spigot to prevent kinks and pinched inner tubing.\u003c\/li\u003e\n  \u003cli\u003eSolid brass construction resists cracking and thread damage over time.\u003c\/li\u003e\n  \u003cli\u003eMales-to-male 3\/4\" GHT ends fit standard garden hose female couplings and accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pressure washer, RV, or washing machine setup?\u003c\/h3\u003e\n\u003cp\u003eYes—each end carries standard 3\/4\" GHT male threads, the common size for many outdoor water connections. The elbow works as a transition between fixed spigots and hoses used for pressure washers, RV water fills, washing machine hookups (where compatible), and typical garden hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" Garden Hose Thread (GHT) male on both ends for wide compatibility.\u003c\/li\u003e\n  \u003cli\u003eUseful for pressure washers and outdoor water appliances in tight spaces.\u003c\/li\u003e\n  \u003cli\u003eEasy to attach by hand—no special tools required for standard installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant is the adapter?\u003c\/h3\u003e\n\u003cp\u003eManufactured from solid brass, the elbow offers corrosion resistance compared with many plated or plastic alternatives. A sturdy metal body maintains thread shape under repeated use, cutting the risk of leaks when paired with properly seated gaskets or sealing tape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid-brass body for long-lasting corrosion resistance and mechanical strength.\u003c\/li\u003e\n  \u003cli\u003eCompatible with rubber washers or PTFE tape for improved sealing if needed.\u003c\/li\u003e\n  \u003cli\u003eReliable for seasonal outdoor exposure when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is it to install and remove?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: hand-thread the male ends into the female connectors on your faucet and hose, then tighten by hand until snug. The compact, right-angle shape reduces torque on the hose, and removal is equally simple when you need to switch hoses or accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten to connect; no specialized tools required for typical use.\u003c\/li\u003e\n  \u003cli\u003eCompact profile keeps connections close to walls and under eaves.\u003c\/li\u003e\n  \u003cli\u003eSold in a 2-piece set so you can outfit multiple spigots or keep a spare on hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hooshing 90° 3\/4\" GHT male-to-male brass elbow is ideal for homeowners, RV owners, campers, and anyone who frequently connects hoses in confined outdoor spaces. It's suited to people who want a durable, easy-to-install solution to reduce hose stress and extend the life of their outdoor water lines and attachments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these elbows compatible with standard garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, both ends are 3\/4\" GHT male threads, compatible with most garden-hose female fittings and outdoor accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the elbow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—hand-tightening is usually sufficient; use a wrench lightly if a firmer seal is needed, avoiding over-tightening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193620353208,"sku":"B0BYJ3KCR5","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-elbow-front-view-brass-connector.jpg?v=1790563294"},{"product_id":"hooshing-propane-hose-with-regulator-3-ft-qcc1-type-1-to-3-8-female-flare-brass-fittings","title":"Hooshing Propane Hose with Regulator — 3 ft QCC1 (Type 1) to 3\/8\" Female Flare, Brass Fittings","description":"\u003cp\u003e\u003cstrong\u003eHooshing 3 Feet Propane Hose with Regulator is a ready-to-use, low-pressure hose assembly with a QCC1 (Type 1) tank adapter and 3\/8\" female flare connection for safely linking most grills and outdoor appliances to a propane cylinder.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for backyard cooks, campers and outdoor appliance owners, this 3-foot assembly combines a built-in regulator, brass fittings and a flexible rubber hose so you can connect a standard 20 lb propane cylinder to grills, heaters, fire pits and other low-pressure devices without extra tools. The regulator keeps gas delivery steady while the Type 1 QCC1 connector matches common propane tanks used across the U.S.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my grill or outdoor appliance?\u003c\/h3\u003e\n\u003cp\u003eYes — the Hooshing hose uses a QCC1 (Type 1) cylinder adapter and a 3\/8\" female flare fitting, which are compatible with the vast majority of consumer gas grills and many other low-pressure appliances. Confirm your appliance has a 3\/8\" male flare fitting before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQCC1 (Type 1) connects to standard 20 lb propane cylinders.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" female flare fits most grill inlet fittings (5\/8\" OD flare).\u003c\/li\u003e\n  \u003cli\u003eWorks with many brands such as Weber, Char-Broil and Dyna-Glo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is this regulator and hose combination?\u003c\/h3\u003e\n\u003cp\u003eThe assembly pairs solid brass fittings with a reinforced rubber hose to create a tight, corrosion-resistant connection and a flexible run between tank and appliance. The regulator is designed for low-pressure applications and the materials help maintain a stable, sealed gas path during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% solid brass fittings resist rust and wear.\u003c\/li\u003e\n  \u003cli\u003eLong-lasting rubber hose flexes without kinking.\u003c\/li\u003e\n  \u003cli\u003eFactory-installed regulator reduces overpressure concerns for low-pressure devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple and tool-free for most users: hand-tighten the QCC1 connector to the propane cylinder, then attach the 3\/8\" female flare to your appliance inlet. Make sure connections are snug and check for leaks with soapy water before using the appliance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo additional tools required for standard installations.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten connectors; re-check fittings periodically.\u003c\/li\u003e\n  \u003cli\u003eLeak-test recommended after first connection and after any adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat appliances can I use this with?\u003c\/h3\u003e\n\u003cp\u003eThe Hooshing 3-foot hose is intended for low-pressure propane applications and pairs well with grills, side burners, fire pits, patio heaters and portable camping stoves that accept a 3\/8\" male flare inlet. It is a versatile replacement or spare hose for many outdoor setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gas grills, patio heaters and fire pits.\u003c\/li\u003e\n  \u003cli\u003eWorks with two-burner camping stoves, lanterns and low-pressure generators.\u003c\/li\u003e\n  \u003cli\u003eUseful as a spare or replacement hose for seasonal outdoor equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Home cooks, tailgaters, campers and anyone who needs a reliable low-pressure connection from a standard propane tank to outdoor appliances. If you own a grill or heater with a 3\/8\" male flare fitting and use a 20 lb propane cylinder, this pre-assembled Hooshing hose and regulator gives a quick, durable, tool-free way to connect and go.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit standard 20 lb propane tanks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Hooshing assembly uses a QCC1 (Type 1) adapter designed for standard 20 lb propane cylinders.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the regulator without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The regulator and hose are designed for hand-tight installation; perform a leak check after connecting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193815978168,"sku":"B0BL2BSN7K","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-regulator-and-hose.jpg?v=1790566384"},{"product_id":"hooshing-1-2-garden-hose-repair-kit-6pcs-brass-barb-menders-with-stainless-steel-clamps-leak-resistant","title":"Hooshing 1\/2\" Garden Hose Repair Kit — 6PCS Brass Barb Menders with Stainless Steel Clamps, Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing 6PCS 1\/2\" Garden Hose Repair Kit is a set of brass barb menders and stainless-steel clamps designed to quickly join or repair 1\/2\" inner-diameter garden hoses for a solid, leak-resistant connection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you need to fix a split hose, extend watering reach, or adapt hoses to nozzles and sprinklers, this six-piece kit gives you the fittings and clamps required for durable outdoor plumbing repairs. Each coupling is machined from solid brass to resist corrosion and paired with stainless-steel worm clamps for firm grips. Lightweight and compact, the components slip into place with simple hand tools and deliver a practical, long-lasting solution for common hose failures.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these menders repair a broken garden hose?\u003c\/h3\u003e\n\u003cp\u003eRepairing a damaged hose is straightforward: trim the frayed ends, insert a brass barb coupling into each hose half, and secure both sides with the included clamps. The barbed profile holds the rubber internally while the worm clamp compresses the hose onto the brass, creating a tight seal that minimizes leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim damaged hose to clean cut for best seal.\u003c\/li\u003e\n  \u003cli\u003ePush brass barb fully into hose until barb ridges seat.\u003c\/li\u003e\n  \u003cli\u003eTighten stainless-steel clamps over the hose and barb firmly.\u003c\/li\u003e\n  \u003cli\u003eTest under water pressure and retighten clamps if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fittings work with my 1\/2\" garden hoses and accessories?\u003c\/h3\u003e\n\u003cp\u003eThese menders are sized for hoses with a 1\/2 inch internal diameter and are compatible with many standard garden nozzles, sprayers, and faucet adapters that accept hose-barb connections. Confirm your hose I.D. before installing, since the performance depends on matching the specified 1\/2\" measurement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended for hoses with 1\/2\" inner diameter.\u003c\/li\u003e\n  \u003cli\u003ePairs well with standard nozzles, sprayers, and quick-connect adapters that use barbed fittings.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for hoses with significantly thicker walls or different I.D. sizes without verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the materials reliable outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe couplings are crafted from solid brass to resist rust and corrosion from water exposure, while the clamps are stainless steel to maintain clamping force and avoid seizing. Together these materials reduce routine maintenance and help the repair hold up across seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass bodies for long-term corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel worm clamps resist rust and provide adjustable tension.\u003c\/li\u003e\n  \u003cli\u003eSimple mechanical connection—no adhesives or specialized tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for someone with limited tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires only a utility knife or scissors to trim the hose and a screwdriver or nut driver to tighten the worm clamps. The process is intuitive and can be completed in minutes without plumbing experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut hose squarely with a sharp blade.\u003c\/li\u003e\n  \u003cli\u003ePush barb into hose and hand-position clamp.\u003c\/li\u003e\n  \u003cli\u003eTighten clamp using a standard screwdriver or socket tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 6PCS 1\/2\" Garden Hose Repair Kit is ideal for homeowners, gardeners, handypersons, and property managers who want a fast, reliable way to fix or extend small-diameter garden hoses. If you frequently water containers, run drip lines, attach sprayers, or maintain outdoor equipment using 1\/2\" hoses, this kit supplies multiple spare menders so you can handle on-the-spot repairs, make quick modifications, and avoid replacing entire hoses. Keep a set in your garden shed, workshop, or vehicle for emergency fixes and seasonal maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with hoses that are not exactly 1\/2\" I.D.?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These menders are designed for 1\/2\" inner-diameter hoses; slight wall tolerances may work but confirm measurements for a reliable seal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the couplings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools—just trim the hose with a sharp knife and tighten the worm clamps with a screwdriver or nut driver.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54193944330424,"sku":"B0CRNRG4Z1","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-barb-front-view.jpg?v=1790567703"},{"product_id":"hooshing-3-4-in-npt-to-3-4-in-ght-brass-adapter-3-pack-with-rubber-gaskets-corrosion-resistant","title":"Hooshing 3\/4 in NPT to 3\/4 in GHT Brass Adapter — 3-Pack with Rubber Gaskets, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing's 3-piece brass adapter converts a 3\/4\" NPT male fitting to a 3\/4\" GHT female connection for fast, leak-resistant joins between threaded garden plumbing and standard hoses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese solid-brass connectors give you a compact, durable way to link indoor or outdoor plumbing with gardening tools and hoses that use GHT threads. Each adapter includes a rubber gasket for a tight seal and is manufactured to resist corrosion and wear. The pack of three provides spares or multiple connection points for sheds, irrigation lines, or vehicle washing stations.\u003c\/p\u003e\n\n\u003ch3\u003eWill this adapter fit my faucet or hose?\u003c\/h3\u003e\n\n\u003cp\u003eThe Hooshing adapter is designed specifically to mate a 3\/4\" NPT male thread to a 3\/4\" GHT female thread. Verify the thread types and diameters on your fixtures before ordering—NPT (pipe thread) and GHT (garden hose thread) are not interchangeable without an adapter like this.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConnects 3\/4\" NPT male plumbing to 3\/4\" GHT female hoses.\u003c\/li\u003e\n  \u003cli\u003eCheck your fixture stamping or measure thread diameter to confirm compatibility.\u003c\/li\u003e\n  \u003cli\u003eIncludes rubber gasket to improve sealing on common household pressure ranges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant are these brass adapters?\u003c\/h3\u003e\n\n\u003cp\u003eMade from solid brass, the fittings are built to resist rust, bending and general wear from repeated hookups. The included rubber gaskets reduce the chance of water leakage when hand-tightened; the swivel-style thread tolerances allow quick connect and disconnect without tools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for corrosion resistance and long service life.\u003c\/li\u003e\n  \u003cli\u003eRubber gasket prevents friction and improves water tightness.\u003c\/li\u003e\n  \u003cli\u003eHand-installable design for tool-free, repeatable use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tasks will these adapters help me with around the home and yard?\u003c\/h3\u003e\n\n\u003cp\u003eThese adapters bridge the gap between plumbing outlets and garden equipment, making them useful for watering, pressure washing, and indoor-outdoor cleaning chores. Their compact size and pack of three let you outfit multiple stations or keep a spare in a toolbox for emergency repairs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAttach hoses to faucets, pressure washers, or water spigots with differing thread standards.\u003c\/li\u003e\n  \u003cli\u003eUseful for garden spraying, car washing, patio cleaning, and temporary irrigation lines.\u003c\/li\u003e\n  \u003cli\u003eThree-piece pack means one set can serve several locations or act as replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the Hooshing brass adapter?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: place the rubber gasket, thread the adapter by hand onto the male NPT fitting, then connect the garden hose. No special tools are required; avoid over-tightening to protect threads and the gasket. For upkeep, rinse off dirt and inspect gaskets periodically; replace any gasket showing cracks to maintain a tight seal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHand-tighten to avoid damaging threads or gasket—no wrenches needed.\u003c\/li\u003e\n  \u003cli\u003eClean with fresh water; remove grit that could wear the seal.\u003c\/li\u003e\n  \u003cli\u003eStore indoors or under cover to extend brass finish and gasket life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners, landscapers, and anyone working with mixed plumbing standards who needs a small, reliable adapter to connect 3\/4\" NPT plumbing to 3\/4\" garden hoses. The three-pack suits people outfitting multiple outdoor outlets, DIYers who want spares on hand, and professionals who need compact, corrosion-resistant fittings that are quick to use without tools. If you want durable brass connectors that simplify mixed-thread hookups and reduce leaks, this Hooshing set offers a practical, budget-friendly option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this adapter convert pipe thread to garden hose thread?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It adapts a 3\/4\" NPT male thread to a 3\/4\" GHT female thread for hose connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools required to install the Hooshing adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The adapter is hand-installable; avoid over-tightening to protect threads and gasket.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194007965880,"sku":"B0CKH2PFYM","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view_d6910f81-86af-43c2-be87-8386042c7092.jpg?v=1790568410"},{"product_id":"hooshing-3pcs-brass-garden-hose-adapters-3-4-npt-to-3-4-ght-swivel-rubber-gasket-leak-resistant","title":"Hooshing 3PCS Brass Garden Hose Adapters 3\/4\" NPT to 3\/4\" GHT — Swivel, Rubber Gasket Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing 3PCS garden hose adapters are double-female brass connectors that convert a 3\/4\" NPT thread to a 3\/4\" GHT thread, sold as a three-piece set with rubber gaskets for leak-resistant connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese brass swivel adapters let you join hoses, faucets, and watering tools that use different 3\/4\" thread standards without tools. Machined from solid brass and fitted with rubber seals, they resist corrosion and simplify on-and-off attachment for outdoor watering, car washing, and general cleaning tasks. The swiveling feature helps line up threads during hand-tightening but locks when fully secured to reduce twisting under pressure.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use the Hooshing adapter with my existing garden hoses?\u003c\/h3\u003e\n\u003cp\u003eThread the appropriate end onto the corresponding fitting—one side accepts 3\/4\" NPT and the other 3\/4\" GHT—then hand-tighten until the rubber gasket seats and no drip is visible. No special wrenches are required; the swivel portion lets you orient the connection for a straight hose run.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch NPT or GHT to your fixture before attaching.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten until the rubber gasket compresses.\u003c\/li\u003e\n  \u003cli\u003eUse the swivel to align hoses, avoid over-rotating once tight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these adapters prevent leaks and withstand outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe adapters are made from solid brass, which resists rust and withstands typical garden exposure. Each unit includes a rubber gasket to seal the threaded joint; with correct installation the connection should be drip-free under normal household water pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction resists corrosion and mechanical wear.\u003c\/li\u003e\n  \u003cli\u003eRubber gaskets create a water-tight seal when properly tightened.\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine outdoor use—replace gasket if worn over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and chores are these adapters suited for?\u003c\/h3\u003e\n\u003cp\u003eThese double-female adapters bridge the common 3\/4\" NPT and 3\/4\" GHT standards, making them useful when matching garden hoses to fixtures, sprinklers, pressure washers, or water-fed tools that differ in thread type. They’re a practical addition to any outdoor toolkit for cleaning, irrigation, and vehicle maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect hoses to faucets, spray wands, or washers using different thread types.\u003c\/li\u003e\n  \u003cli\u003eHelpful for seasonal tool swaps and multi-piece hose setups.\u003c\/li\u003e\n  \u003cli\u003eCompact three-piece kit reduces repeat purchases and keeps spares on hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many adapters come in a pack and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eThe package contains three identical double-female brass connectors and three rubber gaskets. Before purchasing, confirm whether your equipment uses 3\/4\" NPT or 3\/4\" GHT threads so you get the correct adapter configuration for your gear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 3 adapters and 3 rubber gaskets in one box.\u003c\/li\u003e\n  \u003cli\u003eVerify thread type (3\/4\" NPT vs 3\/4\" GHT) on both mating parts.\u003c\/li\u003e\n  \u003cli\u003eKeep spare gaskets on hand to maintain a reliable seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners, gardeners, handymen, and car washers who need a simple, durable way to adapt between common 3\/4\" threads will find this Hooshing 3-pack convenient. It’s also suited to anyone managing multiple watering devices or hose systems who needs reliable, tool-free connections and a small stock of spare adapters for quick repairs or reconfiguration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these adapters compatible with standard 3\/4\" garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the adapters convert between 3\/4\" NPT and 3\/4\" GHT; confirm your fittings’ thread standard before connecting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the Hooshing brass connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools are required—hand-tighten until the rubber gasket seats; avoid over-tightening once secured.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194007900344,"sku":"B09H2DXSMD","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-3-pack.jpg?v=1790568411"},{"product_id":"hooshing-4pcs-3-8in-barb-to-3-4in-ght-hose-connector-brass-repair-kit-with-stainless-clamps","title":"Hooshing 4PCS 3\/8in barb to 3\/4in GHT hose connector — brass repair kit with stainless clamps","description":"\u003cp\u003e\u003cstrong\u003eHooshing 4PCS Garden Hose Connector is a brass 3\/8\" barb to 3\/4\" GHT female repair and adaptor set designed to restore or link 3\/8\" hoses to standard 3\/4\" garden fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf a torn or mismatched hose is interrupting watering, car washing, or irrigation tasks, this compact kit gives a fast, durable fix. Each kit includes four solid brass barb-to-GHT connectors and stainless-steel clamps so you can splice, adapt, or upgrade 3\/8\" flexible tubing to common 3\/4\" threaded garden hardware. The corrosion-resistant brass body and supplied clamps aim to deliver a leak-resistant connection without specialty tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this connector repair a damaged 3\/8\" hose?\u003c\/h3\u003e\n\u003cp\u003eThe connector acts as an inline mender: you trim the damaged section of hose, push the 3\/8\" end over the barb, then secure it with the stainless clamp. The 3\/4\" GHT female thread accepts standard garden spigots, nozzles, or accessories, turning a cut or incompatible hose into a usable line again.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim hose squarely to remove the damaged area.\u003c\/li\u003e\n  \u003cli\u003eInsert the brass 3\/8\" barb fully into the hose bore.\u003c\/li\u003e\n  \u003cli\u003eTighten the included stainless-steel clamp to compress and seal.\u003c\/li\u003e\n  \u003cli\u003eScrew the 3\/4\" GHT female onto garden fittings or accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from these adaptors?\u003c\/h3\u003e\n\u003cp\u003eThe fittings are machined from premium brass for strong mechanical strength and built-in resistance to rust and corrosion. Each connector ships with a stainless clamp so the hose-to-barb junction stays secure under typical garden pressures. This combination is chosen to withstand outdoor exposure better than many low-cost plastic alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass body for long-lasting structural integrity.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel clamps resist rust where moisture is present.\u003c\/li\u003e\n  \u003cli\u003eSuitable for repeated installation and seasonal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich devices and hose sizes work with this kit?\u003c\/h3\u003e\n\u003cp\u003eThese adaptors are made specifically for 3\/8\" inner-diameter flexible tubing that you want to connect to 3\/4\" garden-threaded fittings. They are commonly used with small garden hoses, pressure washers with compatible fittings, filters, sprayers, and many hose-end nozzles that accept 3\/4\" GHT.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 3\/8\" ID hose lines and tubing.\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female thread fits standard garden spigots and accessories.\u003c\/li\u003e\n  \u003cli\u003eWorks with sprayers, sprinklers, filters, and hose nozzles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires only basic hand tools: a sharp knife or hose cutter and a screwdriver to tighten the clamp. No soldering, adhesives, or specialty plumbing tools are necessary, making it a practical DIY repair for homeowners, gardeners, and handymen.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut hose squarely using a utility knife or hose cutter.\u003c\/li\u003e\n  \u003cli\u003ePush hose onto the brass barb until fully seated.\u003c\/li\u003e\n  \u003cli\u003eSecure with the supplied clamp using a flathead or Phillips screwdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Hooshing 4PCS 3\/8\" barb to 3\/4\" GHT female hose connector set is ideal for homeowners, landscapers, and hobby gardeners who need a quick, reliable way to repair or adapt small-diameter hoses to standard garden fittings. If you want a weather-resistant brass solution that avoids replacing entire hoses or buying special adapters, this kit provides a compact, affordable option for routine outdoor plumbing and watering tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 3\/8\" inner-diameter hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the barb is sized for 3\/8\" ID flexible hose; measure your hose bore to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are clamps included and are they rustproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each connector comes with a stainless-steel clamp designed to resist rust under normal outdoor conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194217615544,"sku":"B0CZHPVVK2","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-3-8-to-3-4-connector.jpg?v=1790571383"},{"product_id":"hooshing-garden-hose-adapters-1-2-in-npt-to-3-4-in-ght-3pcs-solid-brass-swivel-with-rubber-gasket","title":"Hooshing garden hose adapters 1\/2 in NPT to 3\/4 in GHT, 3PCS — solid brass swivel with rubber gasket","description":"\u003cstrong\u003eThe Hooshing 3PCS garden hose adapter converts a 1\/2\" NPT male thread to a 3\/4\" GHT female connection for quick, leak-resistant joins between mismatched fittings.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need to link a 1\/2\" NPT spigot or accessory to a standard 3\/4\" garden hose thread, this brass swivel adapter gives a compact, durable solution. Machined from solid brass with rubber gaskets, the three-piece set is designed for outdoor watering, car washing, and general cleaning where a secure threaded transition is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter prevent leaks and stay durable?\u003c\/h3\u003e\n\u003cp\u003eThe adapter uses precision-cut brass threads and a rubber gasket to form a tight seal between different thread standards. Brass resists corrosion outdoors and the swivel design reduces stress at the connection point, lowering the chance of cross-threading.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction resists rust and outdoor wear.\u003c\/li\u003e\n  \u003cli\u003eRubber gasket cushions the joint and reduces drips.\u003c\/li\u003e\n  \u003cli\u003eSwivel feature allows hand-tightening without tools.\u003c\/li\u003e\n  \u003cli\u003ePrecision machining ensures proper thread engagement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my hose and faucet setup?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is specifically sized with a 1\/2\" NPT male end and a 3\/4\" GHT female end; confirm those thread types before buying. It bridges common U.S. garden-hose threads to many fixtures and accessories that use 1\/2\" NPT.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" NPT male on one side for compatible fittings and nipples.\u003c\/li\u003e\n  \u003cli\u003e3\/4\" GHT female on the other side for standard garden hoses.\u003c\/li\u003e\n  \u003cli\u003ePack of three adapters gives spares or multiple connection points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and removal?\u003c\/h3\u003e\n\u003cp\u003eInstallation is hands-on—no tools required for most connections—thanks to the swivel design. You simply thread the male end into the 1\/2\" NPT port and attach the 3\/4\" hose to the female side, tightening until snug to avoid leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tightenable swivel for quick on\/off use.\u003c\/li\u003e\n  \u003cli\u003eGasket helps prevent overtightening while sealing the joint.\u003c\/li\u003e\n  \u003cli\u003eRemovable and reusable across seasons or setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat common tasks can I use these adapters for?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are useful for garden watering, connecting pressure washers or hoses to smaller pipe fittings, and attaching spray accessories to fixtures with different thread standards. They simplify work when a direct hose-to-fitting match isn’t available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGarden watering and sprinkler hookups with mixed fittings.\u003c\/li\u003e\n  \u003cli\u003eCar washing and patio cleaning where adapters are needed.\u003c\/li\u003e\n  \u003cli\u003eConnecting outdoor faucets, pumps, or irrigation components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 3PCS adapter set suits homeowners, landscapers, and DIYers who face mismatched hose and pipe threads. If you own tools, hoses, or irrigation parts with 1\/2\" NPT and need to attach a standard 3\/4\" garden hose quickly and reliably, this three-pack provides spare parts and versatility without specialized tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this adapter fit all garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits hoses with a standard 3\/4\" GHT female thread and connects to 1\/2\" NPT male fittings; check your parts match these sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools required to install the adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools are normally needed—hand-tighten the swivel for a secure connection; use a wrench only if additional tightening is necessary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194271617208,"sku":"B09655DJ2K","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-adapter-front-view_be38fa34-4196-43c2-a71f-a915b87faf92.jpg?v=1790572707"},{"product_id":"hooshing-brass-garden-hose-tee-3-4-ght-female-x-2-male-solid-brass-corrosion-resistant-splitter","title":"Hooshing Brass Garden Hose Tee 3\/4\" GHT Female x 2 Male — Solid Brass, Corrosion-Resistant Splitter","description":"\u003cstrong\u003eHooshing's solid brass 3\/4\" GHT tee fitting joins three garden-hose lines — one female and two male 3\/4\" GHT connections — for reliable water and fluid distribution.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact tee adapter from Hooshing is built from solid brass to resist corrosion and perform across a wide temperature range. It converts and splits flow between three 3\/4\" garden hose thread (GHT) connections, making it a versatile plumbing and outdoor watering component. The piece is suitable for water, air tools, refrigeration lines, and many low- to medium-pressure fluid systems where durable metal fittings are required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Hooshing tee fit into my garden hose setup?\u003c\/h3\u003e\n\u003cp\u003eThe tee has one 3\/4\" GHT female port and two 3\/4\" GHT male ports, so it directly mates with standard garden hose connectors and threaded accessories. Use it to split a supply line to two hoses or to reroute flow while maintaining standard threads for hoses, sprayers, or timers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThreading: standard 3\/4\" GHT female × male × male configuration.\u003c\/li\u003e\n  \u003cli\u003eDirectly compatible with most US garden hose fittings and accessories.\u003c\/li\u003e\n  \u003cli\u003eWorks for splitting or redirecting water to multiple outlets.\u003c\/li\u003e\n  \u003cli\u003eCompact design fits tight outdoor or workshop spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the brass construction useful for outdoor and mechanical use?\u003c\/h3\u003e\n\u003cp\u003eSolid brass delivers corrosion resistance and retains strength across hot and cold conditions, reducing the risk of cracking or seizing. Its ductility helps the fitting withstand mechanical stress when hoses are moved or connected repeatedly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: solid brass for corrosion resistance and durability.\u003c\/li\u003e\n  \u003cli\u003eTemperature tolerance: rated roughly -53°C to 121°C (-65°F to 250°F).\u003c\/li\u003e\n  \u003cli\u003eLow magnetic permeability and good machinability for reliable threads.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both water and many non-corrosive fluids and gases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this tee for applications beyond garden hoses?\u003c\/h3\u003e\n\u003cp\u003eYes — while designed for GHT garden-hose threads, the brass tee is appropriate for a variety of low- and medium-pressure systems. It’s commonly used with compression lines, air tools, refrigeration, instrumentation, and some fuel or lubrication lines where thread compatibility and brass chemical compatibility are acceptable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon uses: air tools, refrigeration, instrumentation, hydraulic systems in applicable ranges.\u003c\/li\u003e\n  \u003cli\u003eCompatible fluids: water, some greases, fuels, LP and natural gas lines where brass is permitted.\u003c\/li\u003e\n  \u003cli\u003eNot intended for high-pressure hydraulic applications unless specified by system requirements.\u003c\/li\u003e\n  \u003cli\u003eCheck local codes and fluid compatibility before installing in gas lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain the Hooshing tee to ensure long life?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: thread the male ends into female hose fittings or adapters and hand-tighten, then secure with a wrench if needed — avoid overtightening. Periodic checks for leaks and thread integrity will keep the fitting functioning for years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply a suitable thread sealant or PTFE tape if required by your system.\u003c\/li\u003e\n  \u003cli\u003eHand-start threads to avoid cross-threading, then snug with a wrench.\u003c\/li\u003e\n  \u003cli\u003eInspect seals and connections seasonally for leaks or wear.\u003c\/li\u003e\n  \u003cli\u003eFlush lines before first use if used with fuels or lubricants to remove debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Hooshing 3\/4\" GHT female × male × male brass tee is ideal for homeowners, gardeners, handypersons, and light-industry technicians who need a durable, multi-connection fitting. Choose this adapter when you require a corrosion-resistant, temperature-tolerant tee to split, reroute, or integrate garden hoses and low- to medium-pressure fluid lines into existing threaded systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tee compatible with standard garden hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses standard 3\/4\" GHT female and male threads compatible with most garden hose fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the brass tee handle hot and cold outdoor conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Solid brass tolerates a wide temperature range (about -53°C to 121°C) and resists corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194292424888,"sku":"B0CJRKPPJQ","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-brass-tee-front-view.jpg?v=1790573139"},{"product_id":"hooshing-pol-to-1-4-male-npt-propane-adapter-soft-nose-brass-full-flow-with-excess-flow-protection","title":"Hooshing POL to 1\/4\" Male NPT Propane Adapter — Soft-Nose Brass, Full-Flow with Excess Flow Protection","description":"\u003cp\u003e\u003cstrong\u003eHooshing's Soft Nose POL Propane Adapter converts a standard POL tank connection to a 1\/4\" male NPT while providing full flow and built-in excess flow protection for secure propane hookups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for backyard grills, camping rigs, and a wide range of propane appliances, this brass POL-to-NPT adapter delivers a reliable, airtight connection between refillable cylinders and regulators, hoses, or valves. The adapter includes a 1\/4\" NPT female x 3\/8\" flare male fitting and is sized for common 20 lb and 30 lb tanks. Its solid brass construction and soft-nose POL interface make it easy to attach and durable enough for repeated use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter fit with my existing propane setup?\u003c\/h3\u003e\n\u003cp\u003eThe Hooshing adapter converts the standard POL tank connection to a 1\/4\" male NPT thread so you can link regulators, hoses, and valves that use NPT fittings. Installation is straightforward: thread the POL end to the cylinder and attach your regulator or hose to the 1\/4\" male NPT side.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with standard POL tank valves used on 20 lb and 30 lb refillable cylinders.\u003c\/li\u003e\n  \u003cli\u003eIncludes 1\/4\" NPT female x 3\/8\" flare male fitting for common regulator hoses.\u003c\/li\u003e\n  \u003cli\u003eSoft-nose POL design eases hand-tight connections without damaging tank fittings.\u003c\/li\u003e\n  \u003cli\u003eBrass construction resists corrosion for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the adapter keep my connection leak-free and safe?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is built for an airtight connection and features excess flow protection to reduce flow if a major leak or disconnection occurs. Proper thread engagement and hand-tightening (or controlled wrench use where indicated) help ensure a secure seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExcess flow protection helps limit fuel flow during sudden disconnection.\u003c\/li\u003e\n  \u003cli\u003eSoft-nose POL seat reduces risk of thread damage and improves sealing surface contact.\u003c\/li\u003e\n  \u003cli\u003eSolid brass threads and body maintain shape under repeated use for consistent sealing.\u003c\/li\u003e\n  \u003cli\u003eRecommended to test connections with soapy water for leaks before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat appliances and situations is this adapter good for?\u003c\/h3\u003e\n\u003cp\u003eThis fitting is suitable for many portable and fixed propane applications where a POL tank needs to connect to an NPT-style regulator, valve, or hose. It’s handy for grilling, portable heaters, camping stoves, and other outdoor propane gear that uses 1\/4\" NPT or 3\/8\" flare inputs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBBQ grills and rotisseries that accept 1\/4\" NPT or flare regulators.\u003c\/li\u003e\n  \u003cli\u003eCamping stoves, patio heaters, and portable appliances requiring quick tank hookups.\u003c\/li\u003e\n  \u003cli\u003eWorkshop heaters or torches where a POL tank must be adapted to NPT fittings.\u003c\/li\u003e\n  \u003cli\u003eHome refillable cylinder conversions for seasonal or temporary setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically quick and intuitive—thread the adapter to the tank and attach the matching regulator or hose. The brass construction and basic mechanical design mean it should provide reliable service with normal maintenance and proper handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten the soft-nose POL end; use a wrench only where specified to avoid overtightening.\u003c\/li\u003e\n  \u003cli\u003eInspect threads, seats, and fittings before each season of use for wear or damage.\u003c\/li\u003e\n  \u003cli\u003eKeep fittings clean and free from grit to preserve the sealing surfaces.\u003c\/li\u003e\n  \u003cli\u003eReplace if seats or threads show deformation or persistent leakage after testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing Soft Nose POL Propane Adapter is for homeowners, grill enthusiasts, campers, and tradespeople who need a dependable POL-to-NPT transition for 20 lb or 30 lb propane cylinders. Choose this adapter if you want a durable brass fitting with excess flow protection that adapts common tank valves to 1\/4\" NPT regulator and hose systems for outdoor appliances and portable heating or cooking gear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this adapter connect a 20 lb propane tank to a standard grill regulator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It converts a POL tank connection to 1\/4\" male NPT and includes fittings compatible with many grill regulators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter include any safety features?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has built-in excess flow protection to help reduce fuel flow in case of a major disconnection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194346164408,"sku":"B0CLGX5VQZ","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-pol-adapter-front-view_bcde34bd-9ef4-4c0a-a86b-99aee47e8a52.jpg?v=1790574012"},{"product_id":"hooshing-3-4-inch-garden-hose-repair-kit-6pc-brass-barb-menders-with-stainless-steel-clamps-leak-resistant","title":"Hooshing 3\/4 inch Garden Hose Repair Kit — 6pc Brass Barb Menders with Stainless Steel Clamps, Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing 6PCS 3\/4\" Garden Hose Repair Kit is a set of solid-brass barb mender connectors and stainless steel clamps designed to join or repair standard 3\/4\" garden hoses quickly and leak-resistantly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your outdoor watering setup has a split, frayed end, or you want to join two sections of hose, this kit supplies six durable brass couplers and matching clamps to restore flow without replacing whole hoses. The fittings are sized for most 3\/4\" I.D. garden hoses and come ready to slip in, tighten, and use—making them a practical addition to any tool box or garden shed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors fix a damaged garden hose?\u003c\/h3\u003e\n\u003cp\u003eEach brass barb coupling pushes into the hose ends and compresses under the supplied stainless steel clamp, creating a secure, pressure-resistant joint. This method restores continuity of the inner bore so water moves through as before, and it avoids the need to discard long hose runs for a single damaged section.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInsert the brass barb into each cut hose end for a butt-join or use one barb to cap a single leak.\u003c\/li\u003e\n  \u003cli\u003eTighten the stainless clamp with a screwdriver for a snug, leak-minimizing seal.\u003c\/li\u003e\n  \u003cli\u003eCompatible with spray nozzles, faucets and common garden fittings when using the same 3\/4\" size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese menders are crafted from solid brass to resist corrosion and rust outdoors, while the clamps are stainless steel to hold under tension and wet conditions. The combination yields a repair that withstands routine garden use and seasonal exposure better than inexpensive plated fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass couplers for corrosion resistance and longevity.\u003c\/li\u003e\n  \u003cli\u003eStainless steel worm-drive clamps for secure, adjustable tightening.\u003c\/li\u003e\n  \u003cli\u003eSimple mechanical seal—no adhesives required—so parts are replaceable if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a non-professional?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires only a screwdriver and standard cutting tool to prepare hose ends. The barb design guides the hose into place, and the clamp compresses the hose over the barb to form a tight seal—no specialized skills needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut away damaged hose material until you reach solid, even ends.\u003c\/li\u003e\n  \u003cli\u003ePush hose ends over the brass barb and position clamps directly over the barb ridges.\u003c\/li\u003e\n  \u003cli\u003eTighten clamps until the hose is firmly secured but not crushed; test under low pressure first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat typical uses and compatibility can I expect from this kit?\u003c\/h3\u003e\n\u003cp\u003eBeyond repairing torn garden hoses, these adapters are useful for extending hose length, replacing end fittings, or creating custom hose runs for sprinklers and sprayers. They work with most standard 3\/4\" inside-diameter hoses—confirm the hose I.D. before purchase for best fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRepairing leaks and tears in 3\/4\" I.D. garden hoses.\u003c\/li\u003e\n  \u003cli\u003eJoining two hose sections to extend reach without buying new hose.\u003c\/li\u003e\n  \u003cli\u003eConnecting to spray nozzles, quick-release fittings and outdoor faucets when matching size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Home gardeners, landscapers, and property maintenance teams who want a cost-effective, reusable way to repair or extend standard 3\/4\" garden hoses. If you prefer durable metal fittings over plastic alternatives and need enough parts for multiple repairs or projects, the Hooshing 6PCS kit delivers practical, long-lasting connectors for everyday outdoor waterwork.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these menders fit any 3\/4\" garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most standard 3\/4\" I.D. hoses; confirm your hose inner diameter before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—just a sharp cutter to trim the hose and a screwdriver to tighten the stainless clamps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194475073720,"sku":"B0C7G5D2V9","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-packaging-6pcs-brass-hose-menders.jpg?v=1790575970"},{"product_id":"hooshing-propane-adjustable-regulator-with-qcc1-hose-5ft-0-20-psi-brass-knob","title":"Hooshing Propane Adjustable Regulator with QCC1 Hose 5FT 0-20 PSI Brass Knob","description":"\u003cstrong\u003eHooshing’s 5-foot adjustable propane regulator with a QCC1 hose lets you precisely control high-pressure flame output from 0 to 20 PSI for grills, burners, fryers, and fire pits.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact regulator-and-hose assembly is built for high-pressure propane appliances that require a QCC1 (Type 1) tank connection. The unit combines a brass-bodied regulator, a flexible 5-foot high-pressure rubber hose, and standard 3\/8\" female flare fittings to create a stable, leak-resistant link between your tank and the appliance. The red adjustment knob gives you variable control over output pressure, making it simple to match flame intensity to your cooking or heating needs while keeping installation straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I adjust the flame power safely?\u003c\/h3\u003e\n\u003cp\u003eTurn the red control knob to change the regulator output anywhere from fully off to 20 PSI; adjust slowly while monitoring the appliance flame. Always set the regulator to 0 PSI before making or breaking connections, and keep the hose away from open flame and hot surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRotate knob clockwise to reduce pressure, counterclockwise to increase.\u003c\/li\u003e\n  \u003cli\u003eConfirm connections are tight using the 3\/8\" female flare fittings.\u003c\/li\u003e\n  \u003cli\u003eUse a leak solution to test for airtight seals after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my grill, burner, or smoker?\u003c\/h3\u003e\n\u003cp\u003eThe regulator is designed for high-pressure propane appliances compatible with QCC1\/Type 1 tank valves and standard 3\/8\" female flare appliance fittings. It is intended for devices that require a high-pressure feed rather than low-pressure domestic regulators.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gas grills, turkey fryers, high-pressure burners, and fire pits.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for appliances explicitly requiring a low-pressure regulator.\u003c\/li\u003e\n  \u003cli\u003e5-foot hose provides reach for common backyard setups and portable units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant is the hose and connector setup?\u003c\/h3\u003e\n\u003cp\u003eThe assembly pairs a heavy-duty rubber hose with brass fittings to maintain a reliable, airtight connection under high-pressure use. Brass connectors resist corrosion and the rubber hose is rated for propane service, but regular inspection is recommended to ensure long-term safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass fittings for durable, corrosion-resistant connections.\u003c\/li\u003e\n  \u003cli\u003eHigh-pressure rubber hose designed for propane service.\u003c\/li\u003e\n  \u003cli\u003eRecommended visual checks before each use and leak tests after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: attach the regulator to the propane tank’s QCC1 valve and connect the 3\/8\" flare to your appliance. Hand-tightening is often possible, but a wrench is recommended to ensure a secure, leak-free fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect regulator to tank, then hose to appliance using 3\/8\" flare fittings.\u003c\/li\u003e\n  \u003cli\u003eStart with regulator at 0 PSI; tighten fittings and test for leaks.\u003c\/li\u003e\n  \u003cli\u003eTools suggested: adjustable wrench for final tightening and leak solution spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 5FT adjustable regulator and QCC1 hose is aimed at backyard chefs, outdoor cooking enthusiasts, and anyone using high-pressure propane burners, fryers, or portable heaters who needs variable flame control and a robust, easy-to-install connection. If your appliance specifies a high-pressure regulator and accepts 3\/8\" female flare fittings with a QCC1 tank hookup, this kit gives you precise output control and a durable hose length suitable for most outdoor setups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this regulator with any propane tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this regulator fits QCC1\/Type 1 tank valves commonly found on disposable and refillable propane cylinders.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this suitable for low-pressure appliances like indoor stoves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this product is a high-pressure regulator; do not use it with appliances requiring a low-pressure regulator.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54194915016888,"sku":"B09492VN1T","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-regulator-assembly.jpg?v=1790580001"},{"product_id":"hooshing-propane-tank-adapter-pol-to-qcc1-2-pack-solid-brass-quick-connect-leak-resistant","title":"Hooshing Propane Tank Adapter POL to QCC1 — 2‑Pack Solid Brass Quick‑Connect, Leak‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eHooshing 2PCS Propane Tank Adapter converts a POL (LP tank service valve) to a QCC1\/Type 1 quick-connect, letting you attach modern regulators and hoses to larger propane cylinders easily and securely.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you have a larger, older-style propane cylinder but your grill, heater, or RV uses a QCC1\/Type 1 quick-connect regulator, this pair of Hooshing adapters bridges the gap. Machined from solid brass for durability and corrosion resistance, each fitting creates a positive, airtight connection so you can use standard quick-connect appliances with POL valve tanks. The two-pack adds redundancy or lets you outfit multiple appliances without swapping fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter let me use my older propane tank with newer regulators?\u003c\/h3\u003e\n\u003cp\u003eThe Hooshing adapter threads directly into a POL (LP tank service valve) and provides a QCC1\/Type 1 quick-connect outlet that accepts modern regulators and hoses. It converts the male POL connection to the female-style quick-connect found on most consumer appliances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThreads into standard POL \/ LP tank service valve\u003c\/li\u003e\n  \u003cli\u003eProvides QCC1\/Type 1 quick-connect port for regulators\u003c\/li\u003e\n  \u003cli\u003eWorks with grills, patio heaters, and RV appliances that use QCC1\u003c\/li\u003e\n  \u003cli\u003eSold as a convenient two-pack for multiple setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and safety features are built into the fitting?\u003c\/h3\u003e\n\u003cp\u003eEach adapter is made from solid brass, chosen for strength and resistance to corrosion. The metal construction resists wear and maintains a tight seal; the quick-connect design locks in place without tools, reducing the chance of loose connections during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass construction for longevity and anti-corrosion properties\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for a snug, leak-resistant fit\u003c\/li\u003e\n  \u003cli\u003eTool-free quick connect for secure, repeatable attachment\u003c\/li\u003e\n  \u003cli\u003eEasy-grip body to simplify hand tightening and removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and everyday use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: hand-thread the adapter into the POL valve and snap the QCC1-compatible regulator or hose onto the quick-connect end. No special tools or technical skills are required, and the quick-connect mechanism makes connecting and disconnecting fast for regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten into the POL tank valve—no wrench required\u003c\/li\u003e\n  \u003cli\u003eSnap QCC1 regulator or hose into place; audible click confirms connection\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight design for portability and storage\u003c\/li\u003e\n  \u003cli\u003eTwo adapters let you leave one on a spare tank for faster swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this adapter work with my grill, heater, or RV regulator?\u003c\/h3\u003e\n\u003cp\u003eIf your appliance uses a QCC1\/Type 1 quick-connect regulator, this adapter lets it draw from a POL-style propane cylinder. Verify that your tank is a POL (internal-thread) valve and that your regulator is QCC1\/Type 1; this adapter is specifically designed to convert between those two standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with POL (LP tank service valve) tanks\u003c\/li\u003e\n  \u003cli\u003eCompatible with QCC1\/Type 1 quick-connect regulators and hoses\u003c\/li\u003e\n  \u003cli\u003eNot intended for conversion to other uncommon fittings or adapters\u003c\/li\u003e\n  \u003cli\u003eCheck appliance and tank valve types before purchasing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hooshing 2PCS POL to QCC1 propane adapters are ideal for homeowners, tailgaters, RVers, and contractors who own larger POL-valved propane cylinders but want to use contemporary QCC1 quick-connect appliances. If you need a durable, corrosion-resistant fitting that installs without tools and provides safe, repeatable connections, this two-pack offers a practical, portable solution for adapting older tanks to modern equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I attach this adapter directly to a POL propane tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The adapter threads into a standard POL (LP tank service valve) to provide a QCC1 quick-connect outlet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the Hooshing adapter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The adapter is designed for hand-tightening and features a quick-connect for tool-free attachment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hooshing","offers":[{"title":"Default Title","offer_id":54198480208056,"sku":"B082SLBH9L","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/hooshing-front-view-packaging.jpg?v=1790589888"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/hooshing-front-view-packaging.jpg?v=1790679853","url":"https:\/\/canadianlawn.ca\/collections\/hooshing.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}