{"title":"Funmit","description":"\u003cp\u003eBrowse 23 Funmit products at Canadian Lawn, including robotic \u0026amp; automatic pool cleaners, pool heaters \u0026amp; heat pumps and pool \u0026amp; spa replacement parts. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"funmit-in-line-filter-screen-replacement-48-222-2-pack-stainless-steel-mesh-for-zodiac-polaris","title":"Funmit In-Line Filter Screen Replacement 48-222 — 2-Pack Stainless Steel Mesh for Zodiac Polaris","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit 48-222 in-line filter screen is a direct-fit replacement for Zodiac Polaris pressure cleaners that traps debris and protects internal components without affecting water flow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Zodiac Polaris pressure pool cleaner is losing suction or passing larger debris into its hoses and valves, a worn or clogged in-line screen could be the cause. Funmit’s 48-222 replacement screens are made from corrosion-resistant materials and stainless steel mesh to catch sand, leaves, and grit before they reach pumps, seals, and fine mechanisms. Sold as a two-pack, these screens are designed to match Polaris factory dimensions so installation is quick and requires no special tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this filter screen affect my cleaner’s performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged or clogged in-line screen restores reliable debris capture, prevents abrasive particles from reaching moving parts, and helps maintain consistent suction. Because the mesh is fine but engineered for flow, it balances protection with minimal restriction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel mesh captures small grit and organic debris.\u003c\/li\u003e\n  \u003cli\u003eOpen-frame design preserves water flow and suction.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce wear on seals, valves, and turbine components.\u003c\/li\u003e\n  \u003cli\u003eTwo screens included for staggered replacements or a spare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Zodiac Polaris models are compatible with the 48-222 screen?\u003c\/h3\u003e\n\u003cp\u003eThese Funmit 48-222 screens are manufactured to fit a range of Polaris pressure-cleaner models. They align with the original equipment size and mounting points so you can swap them into the in-line housings used on many Polaris units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Polaris 480 PRO and 3900 Sport models.\u003c\/li\u003e\n  \u003cli\u003eFits Vac-Sweep 380, Vac-Sweep 280, and 280\/380 TankTrax variants.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for other Polaris pressure-cleaner systems using the 48-222 screen size.\u003c\/li\u003e\n  \u003cli\u003eCheck your cleaner’s part number if you are uncertain before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Funmit replacement and how often should it be changed?\u003c\/h3\u003e\n\u003cp\u003eFunmit builds these screens with durable housing materials and stainless steel mesh to resist corrosion and tearing in chlorinated or saltwater pools. Replacement frequency depends on pool conditions and debris load; heavy leaf or sandy environments need more frequent checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel mesh resists corrosion and tearing over many cycles.\u003c\/li\u003e\n  \u003cli\u003eDurable plastic housing withstands normal pressure-cleaner stresses.\u003c\/li\u003e\n  \u003cli\u003eInspect monthly in high-debris seasons; replace when mesh is damaged or clogged.\u003c\/li\u003e\n  \u003cli\u003eTwo-pack gives a quick spare for uninterrupted cleaning cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this part for? Pool owners and maintenance professionals who use Zodiac Polaris pressure cleaners and want a cost-effective, OEM-compatible way to protect pumps and moving parts will benefit from the Funmit 48-222 in-line filter screens. If you maintain a pool with trees, sand, or regular dirt entry, or if your cleaner shows intermittent performance, these screens give a simple preventive upgrade without changing the cleaner’s design. Funmit supports buyers with customer service for fitment or quality questions, and the two-pack format suits both single-cleaner replacements and a spare for future use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 48-222 screen fit my Polaris Vac-Sweep 380?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Funmit 48-222 is designed to match the original Polaris Vac‑Sweep 380 screen dimensions for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the in-line filter screen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check monthly during heavy debris seasons; replace when the mesh is torn, bent, or permanently clogged.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54192875798712,"sku":"B089NHJDKZ","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-48-222-front-view.jpg?v=1790553376"},{"product_id":"funmit-flue-temperature-sensor-for-pentair-spa-heaters-42002-0024s-direct-replacement-stainless-steel-probe","title":"Funmit Flue Temperature Sensor for Pentair Spa Heaters — 42002-0024S Direct Replacement, Stainless Steel Probe","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit 42002-0024S is a direct-replacement stack flue temperature sensor made to restore safe, reliable operation of Pentair MasterTemp and Sta‑Rite Max‑E‑Therm spa and pool heaters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pentair-style heater shows intermittent shutdowns, safety lockouts or fault codes related to the chimney\/flue sensor, this Funmit 42002-0024S replacement part provides a like-for-like repair path. Built with a corrosion-resistant stainless steel probe and heat-protected wiring, the sensor measures exhaust temperature so the heater’s control board can make safe operating decisions. This listing covers compatibility notes, common fault fixes, installation tips and who benefits most from this upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor fix my heater’s fault codes?\u003c\/h3\u003e\n\u003cp\u003eThe 42002-0024S monitors flue\/exhaust temperature and feeds that data to the heater control. If the original sensor has degraded or failed, the control may register errors like E05, E06 or SFS and shut down to protect the system. Replacing the worn sensor with this direct-fit Funmit unit typically clears those faults and restores normal operation when wiring and control board are otherwise healthy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for part number 42002-0024S — swap without modifying mounts.\u003c\/li\u003e\n  \u003cli\u003eTargets common error codes: E05, E06 and SFS from flue sensor faults.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel probe provides stable temperature readings under heat stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features improve durability and long-term performance?\u003c\/h3\u003e\n\u003cp\u003eFunmit constructed this sensor to withstand the harsh environment inside a heater chimney. The stainless steel probe resists rust and scaling, while the wiring comes with a heat-resistant sleeve to prevent insulation breakdown. These choices reduce failure from corrosion and heat aging, increasing the part’s service life compared with low-quality alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRust-free stainless-steel probe for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eHeat-protected wire sleeve to reduce high-temperature wear.\u003c\/li\u003e\n  \u003cli\u003eRobust connectors and factory-compatible harness for reliable contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the 42002-0024S safely and correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable working around pool heater electrical components, but it should be performed with power off. Remove power at the breaker, note wiring positions, unclip the old sensor, and install the new unit in the same location. If you’re unsure, consult a certified technician to avoid wiring mistakes or safety risks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways cut power to the heater before starting work.\u003c\/li\u003e\n  \u003cli\u003eMatch wiring and clip locations to the original sensor — no modification required.\u003c\/li\u003e\n  \u003cli\u003eWear work gloves to protect hands when accessing the chimney area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my heater model?\u003c\/h3\u003e\n\u003cp\u003eThis Funmit sensor is a direct replacement intended for Pentair MasterTemp and Sta‑Rite Max‑E‑Therm electrical systems that used the 42002-0024S original part. Verify your existing part number matches 42002-0024S before ordering to confirm compatibility; if your heater uses a different sensor part number, this unit may not fit correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned as a direct swap for OEM part 42002-0024S.\u003c\/li\u003e\n  \u003cli\u003eFits Pentair MasterTemp and Sta‑Rite Max‑E‑Therm heater electrical layouts.\u003c\/li\u003e\n  \u003cli\u003eCheck your current sensor part number to ensure a match before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool and spa owners, service technicians, and maintenance professionals who need a dependable replacement for a failing Pentair-style flue temperature sensor will find this Funmit 42002-0024S an economical and durable option. It’s best for anyone troubleshooting E05, E06 or SFS-type errors or eliminating random heater shutdowns caused by a worn flue sensor. If you prefer to avoid in-shop downtime, this direct-fit part simplifies field replacement and gets heaters back into safe service quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor fit Pentair MasterTemp heaters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Funmit 42002-0024S is a direct replacement for Pentair MasterTemp and Sta‑Rite Max‑E‑Therm systems using part 42002-0024S.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can replacing this sensor clear E05 or SFS errors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing a faulty flue sensor often clears E05, E06 and SFS errors when the control board and wiring are otherwise intact.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54193202593976,"sku":"B09SHHQ5JD","price":47.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-packaging-flue-sensor.jpg?v=1790559662"},{"product_id":"funmit-wall-fitting-replacement-for-polaris-180-280-pool-cleaners-universal-1-1-2in-thread-bayonet-collar","title":"Funmit Wall Fitting Replacement for Polaris 180\/280 Pool Cleaners — Universal 1-1\/2in Thread Bayonet Collar","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit 6-500-00 universal wall fitting is a direct replacement collar that restores a secure, leak-free connection between your Polaris automatic pool cleaner and the pool wall.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the wall fixture on your Polaris-style cleaner has cracked, swollen, or started leaking, this 6-500-00 replacement part provides a durable, direct-fit repair. Designed as a universal wall fitting (UWF) for many Polaris models, the Funmit collar reconnects the bayonet-style cleaner hose to the skimmer or dedicated wall inlet so your cleaner can regain full suction and reliable operation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Polaris and similar models does this wall fitting fit?\u003c\/h3\u003e\n\u003cp\u003eThe Funmit 6-500-00 is compatible with a wide range of Polaris and Polaris-style vacuums and tank-trax models. It replaces worn or broken wall fixtures and is listed as an equivalent for several part numbers and model families.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Polaris 65 Turbo Turtle, 360, 380 series, and 280\/180 Vac Sweep units.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for models labeled 3900 Sport, 380 Vac Sweep, 360 Vac Sweep.\u003c\/li\u003e\n  \u003cli\u003eFits 280 TankTrax, 180 Vac Sweep, 165 Vac Turbo Sweep and other bayonet-style cleaners.\u003c\/li\u003e\n  \u003cli\u003eUniversal collar design for many standard bayonet inlet fittings used on legacy Polaris systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation work and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for homeowners familiar with pool fittings. One side of the connector screws into a 1-1\/2\" threaded wall inlet while the opposite side accepts the cleaner's bayonet tabs, locking in place for a secure connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 1-1\/2\" pool wall thread on the inlet side for standard plumbing attachments.\u003c\/li\u003e\n  \u003cli\u003eBayonet side provides two nubs that engage the cleaner hose bayonet for a positive lock.\u003c\/li\u003e\n  \u003cli\u003eBasic tools: channel pliers or strap wrench for removal\/installation of old fittings; plumber's lubricant or Teflon tape optional for threads.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: under 15 minutes for most DIYers with simple hand tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect from this adapter?\u003c\/h3\u003e\n\u003cp\u003eThe 6-500-00 is manufactured as a wear-resistant collar to hold the bayonet fitting firmly against the pool wall connector. It restores performance by eliminating leaks and wobble that reduce suction and cleaner efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction resists swelling and cracking common in old or sun-damaged fittings.\u003c\/li\u003e\n  \u003cli\u003ePrecise fit reduces water leakage, improving vacuum consistency and run time.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials suitable for typical pool chemical exposure.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match bayonet geometry of Polaris-style hoses for reliable locking action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check if it still leaks after replacement?\u003c\/h3\u003e\n\u003cp\u003eOccasional leaks after replacing a wall fitting often come from improper thread seating, damaged threads on the pool inlet, or worn bayonet tabs on the cleaner hose. Troubleshooting a few simple points usually resolves these issues without further parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm 1-1\/2\" threads are clean and free of debris before installing the new collar.\u003c\/li\u003e\n  \u003cli\u003eUse a light wrap of Teflon tape on the wall inlet threads if small seam leaks appear.\u003c\/li\u003e\n  \u003cli\u003eInspect cleaner hose bayonet tabs for wear; replace hose end if tabs are rounded or broken.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten then secure with a strap wrench—avoid excessive torque that can crack the new fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Funmit 6-500-00 wall fitting is aimed at pool owners and maintenance technicians with older Polaris or Polaris-style automatic cleaners who need a reliable, affordable repair part. If your cleaner wobbles at the wall, loses suction, or the original inlet has swollen or cracked, this universal collar offers a straightforward replacement to restore normal cleaning performance without replacing the entire cleaner or plumbing system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 6-500-00 compatible with my Polaris 280 cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Funmit 6-500-00 is listed as compatible with Polaris 280 Vac Sweep and 280 TankTrax models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the fitting myself without a technician?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically yes. It installs into a 1-1\/2\" threaded wall inlet and locks the bayonet hose—basic hand tools are usually sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54193630412984,"sku":"B08FBVMPMH","price":47.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-6-500-00-front-view.jpg?v=1790563377"},{"product_id":"funmit-heater-thermistor-replacement-for-pentair-sta-rite-mastertemp-42001-0053s-stainless-steel-20-c-to-80-c-accuracy","title":"Funmit Heater Thermistor Replacement for Pentair Sta-Rite\/MasterTemp 42001-0053S Stainless Steel, -20°C to 80°C Accuracy","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit 42001-0053S is a stainless-steel heater thermistor designed to replace the original temperature sensor in Pentair Sta-Rite, MasterTemp and Max-E-Therm pool and spa heaters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement thermistor monitors water temperature to help your heater electrical system run reliably. Built from stainless steel for corrosion resistance and engineered to fit specific Pentair Sta-Rite and MasterTemp models, the Funmit 42001-0053S provides accurate readings across a wide temperature range. Before ordering, confirm your heater model to ensure compatibility and follow basic safety steps—power off and wear gloves—during installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow accurate is the Funmit 42001-0053S for pool and spa temperature sensing?\u003c\/h3\u003e\n\u003cp\u003eThis thermistor is calibrated to operate from -20°C to 80°C, offering consistent temperature monitoring within the normal range for pool and spa systems. It provides repeatable readings that the heater control board uses to maintain set temperatures and protect equipment from temperature-related faults.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range: -20°C to 80°C for common pool and spa needs\u003c\/li\u003e\n  \u003cli\u003eStable thermistor response for reliable control input\u003c\/li\u003e\n  \u003cli\u003eSuitable for both seasonal cold and warm pool conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this replacement part fit my Pentair Sta-Rite or MasterTemp heater?\u003c\/h3\u003e\n\u003cp\u003eThe 42001-0053S is made specifically as a direct replacement for compatible Pentair Sta-Rite, MasterTemp and Max-E-Therm heater electrical systems. Compatibility depends on the exact model and wiring harness; confirm your heater model number prior to purchase to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Pentair Sta-Rite and MasterTemp series and Max-E-Therm systems\u003c\/li\u003e\n  \u003cli\u003eCheck your heater model plate or manual for the original part number\u003c\/li\u003e\n  \u003cli\u003eContact Funmit support if you’re unsure about fit before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation, and what safety steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic appliance maintenance; most replacements take only a few minutes. Always shut off electrical power to the heater, ensure hands and tools are dry, and use work gloves to protect from sharp edges and residual heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off power at the breaker before starting\u003c\/li\u003e\n  \u003cli\u003eRemove the old thermistor and slip the new stainless-steel unit into place\u003c\/li\u003e\n  \u003cli\u003eReattach wiring exactly as removed; test operation after power-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Funmit thermistor durable in pool environments?\u003c\/h3\u003e\n\u003cp\u003eFunmit builds this thermistor with high-grade stainless steel to resist corrosion and extend service life in humid, chlorinated environments. The robust construction reduces the need for frequent replacements and helps maintain consistent performance through seasonal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel housing for improved corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eQuality control to minimize premature failure in pool settings\u003c\/li\u003e\n  \u003cli\u003eBacked by Funmit customer support for part issues or questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Funmit 42001-0053S thermistor is aimed at pool and spa owners, service technicians, and facilities managers who need an affordable, durable replacement sensor for compatible Pentair Sta-Rite, MasterTemp and Max-E-Therm heaters. If you maintain residential or commercial pools and want a reliable temperature-sensing component that’s easy to install and built to resist poolside corrosion, this part offers a practical solution. For uncertain fitment or installation help, contact Funmit customer service for guidance within 24 hours.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this thermistor compatible with all Pentair MasterTemp models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Pentair Sta-Rite, MasterTemp and Max-E-Therm heaters, but check your heater model and part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a technician to install the 42001-0053S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most homeowners can install it in minutes with the power off, but consult a technician if you’re uncomfortable with electrical components.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54193685627064,"sku":"B0895CN2P1","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-42001-0053s-front-view.jpg?v=1790564355"},{"product_id":"funmit-axv414p-replacement-pod-shoes-for-hayward-navigator-pool-vac-8-pack-durable-polymer-snap-in-fit","title":"Funmit AXV414P Replacement Pod Shoes for Hayward Navigator \u0026 Pool Vac - 8-Pack Durable Polymer, Snap-In Fit","description":"\u003cp\u003e\u003cstrong\u003eThese Funmit AXV414P pod shoes are a direct replacement kit—eight durable polymer shoes designed to restore traction and protect the moving parts of Hayward Navigator and compatible Pool Vac cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Hayward Navigator, Navigator Pro, Pool Vac or Pool Vac Plus is skipping, dragging or leaving streaks, worn pod shoes are a common cause. This Funmit set replaces part numbers AXV414P \/ AXV014P with flexible, wear-resistant components engineered to fit original vacuum mounts and keep your cleaner moving smoothly across concrete, plaster or pebble finishes.\u003c\/p\u003e\n\n\u003ch3\u003eHow will replacing the pod shoes affect my pool cleaner’s performance?\u003c\/h3\u003e\n\u003cp\u003eNew pod shoes restore the vacuum’s ability to roll and steer, cutting down on missed spots and excessive brush wear. Because they re-establish proper clearance and traction, your cleaner maintains consistent contact with the pool surface and resumes efficient debris pickup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores traction for smoother navigation and fewer skipped areas\u003c\/li\u003e\n  \u003cli\u003eRe-establishes correct pod-to-surface clearance for better suction efficiency\u003c\/li\u003e\n  \u003cli\u003eReduces stress on motor and gearing by enabling fluid motion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these pod shoes easy to install without tools?\u003c\/h3\u003e\n\u003cp\u003eThe Funmit AXV414P shoes are designed for simple hand installation, so most users can replace them in minutes without specialized tools. Each shoe snaps into the existing pod assembly, and the kit includes eight pieces so you can refurbish all pods at once.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo screws or glues required—snap-in replacements for quick maintenance\u003c\/li\u003e\n  \u003cli\u003eEight-pack covers all pods on most Navigator and Pool Vac models\u003c\/li\u003e\n  \u003cli\u003eStep-by-step fitment mirrors original parts for straightforward swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these made of, and will they last in my pool environment?\u003c\/h3\u003e\n\u003cp\u003eFunmit uses a resilient polymer selected for elasticity and abrasion resistance so the shoes withstand repeated contact with rough finishes and pool chemicals. They’re tested to resist cracking and premature wear, extending the life of the vacuum’s moving components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable polymer formulation resists wear and maintains flexibility\u003c\/li\u003e\n  \u003cli\u003eEngineered to tolerate common pool surfaces: concrete, plaster and pebble\u003c\/li\u003e\n  \u003cli\u003eHelps protect internal parts by reducing shock and abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my specific Hayward model?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered to be compatible with Hayward Navigator, Navigator Pro, Pool Vac, Pool Vac Plus and Pool Vac Ultra units, replacing part numbers AXV414P and AXV014P. Confirm your model’s pod shoe part number before ordering for a guaranteed fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for AXV414P \/ AXV014P part numbers\u003c\/li\u003e\n  \u003cli\u003eCompatible with a wide range of Hayward Navigator and Pool Vac models\u003c\/li\u003e\n  \u003cli\u003eBuy a full eight-pack to service all pods at once\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and service technicians who want an affordable, no-fuss repair to restore their Hayward Navigator or compatible Pool Vac cleaner to reliable operation. If your cleaner is dragging, missing areas, or making louder than normal noises, this Funmit pod shoe kit is a practical maintenance part to extend the life of your vacuum without replacing the entire unit.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these shoes replace AXV414P and AXV014P?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Funmit kit is designed to replace both AXV414P and AXV014P on compatible Hayward Navigator and Pool Vac models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many shoes are included and do I need tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package contains eight pod shoes and they snap in by hand—no tools required for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54193704534200,"sku":"B089NB2S8S","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-pod-shoe-front.jpg?v=1790564566"},{"product_id":"funmit-wing-pod-shoe-kit-for-hayward-pool-cleaners-axv414604whp-left-right-wings-4-pod-shoes-flexible-wear-resistant-parts","title":"Funmit Wing \u0026 Pod Shoe Kit for Hayward Pool Cleaners — AXV414604WHP Left\/Right Wings + 4 Pod Shoes, Flexible Wear-Resistant Parts","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit AXV414604WHP Wing \u0026amp; Pod Shoe Kit is a direct-fit replacement set of left\/right wings and four pod shoes designed to restore traction and performance to compatible Hayward automatic pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Hayward Navigator, Navigator Pro, Pool Vac, Pool Vac Plus or Pool Vac Ultra has slowed, skipped, or begun to scuff the pool surface, worn wings and pod shoes are often the cause. This Funmit kit includes the two wings and four pod shoes that match OEM part numbers AXV604WHP, AXV414P and AXV014P, offering a straightforward swap to get your cleaner back to consistent coverage without a full unit replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit improve my pool cleaner's performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn wings and pod shoes restores the cleaner’s ability to grip and glide along the pool floor, improving navigation and debris pickup. The kit’s materials are chosen for flexibility and wear resistance so the cleaner can maintain contact across different surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces left and right wings to correct steering and stability\u003c\/li\u003e\n  \u003cli\u003eIncludes four pod shoes to renew traction points\u003c\/li\u003e\n  \u003cli\u003eFlexible design adapts to concrete, plaster and pebble finishes\u003c\/li\u003e\n  \u003cli\u003eHelps reduce missed spots and uneven movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these parts compatible with my Hayward model?\u003c\/h3\u003e\n\u003cp\u003eThe Funmit AXV414604WHP kit is specifically manufactured to fit Hayward Navigator series and Pool Vac variants listed by the brand. It corresponds to common replacement part numbers so installation aligns with the original layout and mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Hayward Navigator, Navigator Pro, Pool Vac, Pool Vac Plus, Pool Vac Ultra\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers AXV604WHP, AXV414P, AXV014P\u003c\/li\u003e\n  \u003cli\u003eLeft\/right wings are labeled for correct installation\u003c\/li\u003e\n  \u003cli\u003eNo special tools required for typical replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and durability features?\u003c\/h3\u003e\n\u003cp\u003eThe wings are crafted from heavy-duty plastic engineered for strength and impact resistance, while the pod shoes use elastic, wear-resistant rubber. These materials extend service life and help prevent premature tearing or accelerated abrasion in routine pool cleaning conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium heavy-duty plastic wings resist cracking and deformation\u003c\/li\u003e\n  \u003cli\u003eElastic rubber pod shoe feet provide shock absorption and grip\u003c\/li\u003e\n  \u003cli\u003eManufacturing tests ensure consistent robustness\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated interchange during routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the package?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with everything needed for a standard wing and pod shoe replacement: one left wing, one right wing and four pod shoes. Each piece is marked to simplify orientation, and many users complete the swap without tools by following the directional markings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes 1 left wing, 1 right wing, 4 pod shoes\u003c\/li\u003e\n  \u003cli\u003eParts labeled \"L\" and \"R\" for quick alignment\u003c\/li\u003e\n  \u003cli\u003eTool-free installation in most cases; basic hand tools optional\u003c\/li\u003e\n  \u003cli\u003eSingle kit covers a full standard replacement cycle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and maintenance pros using compatible Hayward automatic cleaners who want a cost-effective way to return their unit to reliable operation without buying a new cleaner. The Funmit AXV414604WHP kit is ideal for anyone who prefers OEM-equivalent spare parts, needs a full wing-and-pod swap in one purchase, and values straightforward, fast installation so the cleaner can resume normal cycles quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Hayward Navigator Pro?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with Hayward Navigator and Navigator Pro and matches OEM part numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the wings and pod shoes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations are tool-free; basic hand tools may be used if clips are tight or older parts are stuck.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54193793532088,"sku":"B089JZK11D","price":47.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-wing-pod-front-packaging.jpg?v=1790565647"},{"product_id":"funmit-tail-scrubber-replacement-for-polaris-180-280-360-380-sweep-hose-foam-push-on-tail-for-floor-wall-corner-scrubbing","title":"Funmit Tail Scrubber Replacement for Polaris 180\/280\/360\/380 Sweep Hose — Foam Push-On Tail for Floor, Wall \u0026 Corner Scrubbing","description":"\u003cp\u003e\u003cstrong\u003eThis Funmit tail scrubber replacement restores the sweep-hose end on Polaris-compatible automatic pool cleaners for reliable scrubbing of floors, walls, steps and corners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Polaris Vac-Sweep or compatible Zodiac\/Polaris-style sweep hose shows a worn, torn, or collapsed foam tail, replacing it with this aftermarket Funmit 9-100-3105 tail scrubber brings back performance without buying a whole new hose. Designed to match the fit and function of original equipment for models such as Polaris 180, 280, 360, 380, 480 and 3900 Sport, this part slips onto the hose end to protect the sweep tip, maintain proper water flow, and help dislodge debris from pool surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tail scrubber fit my Polaris sweep hose?\u003c\/h3\u003e\n\u003cp\u003eThe Funmit tail scrubber is sized and shaped to slide over standard Polaris-style sweep hose ends and seat securely around the sweep tube tip. It’s intended as a direct aftermarket replacement for worn factory foam tails and installs without tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Polaris and Zodiac Polaris-style models listed in product details.\u003c\/li\u003e\n  \u003cli\u003ePush-on design that fits common sweep hose diameters.\u003c\/li\u003e\n  \u003cli\u003eNo adhesive required—rotate slightly after installation for optimal wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction improve cleaning performance?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is molded from high-quality open-cell filter foam with elastic resilience so it conforms to irregular surfaces while resisting premature collapse. Uniform, small pore structure helps channel water and trap fine debris against pool surfaces for more effective scrubbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable, elastic foam with tensile strength for repeated use.\u003c\/li\u003e\n  \u003cli\u003eEvenly distributed small holes that aid debris capture.\u003c\/li\u003e\n  \u003cli\u003eConstruction protects the sweep tube tip and preserves cleaner performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and maintain the scrubber?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick: remove the old worn tail, slide this replacement onto the hose end, and rotate the part periodically to equalize wear. Routine inspection after heavy use helps you spot damage early and swap in a fresh tail before cleaner performance drops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free replacement—pull off the old tail and push on the new one.\u003c\/li\u003e\n  \u003cli\u003eRotate slightly after wear to extend service life.\u003c\/li\u003e\n  \u003cli\u003eCheck periodically for tears, compression, or clogged pores.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this aftermarket part affect my cleaner’s warranty or functionality?\u003c\/h3\u003e\n\u003cp\u003eThis Funmit tail scrubber is an aftermarket replacement manufactured to meet or exceed OEM quality in in-house testing and is intended to restore functionality without altering the cleaner’s core components. It’s a low-cost way to maintain cleaning efficiency when the original foam tail wears out.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAftermarket part designed for fit and performance consistency.\u003c\/li\u003e\n  \u003cli\u003eNon-invasive replacement—does not modify the cleaner’s motor or hoses.\u003c\/li\u003e\n  \u003cli\u003eContact Funmit customer service for quality or fit concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and service technicians who use Polaris Vac-Sweep or compatible sweep-hose pool cleaners and need an affordable, easy-to-install tail replacement to keep scrubbers working effectively. If your cleaner struggles to clean corners, steps or wall junctions because the foam tail is deformed or missing, this Funmit 9-100-3105 tail scrubber provides a practical replacement that restores contact and protects the sweep tube tip for continued reliable operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Polaris models does this tail scrubber fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Polaris and Polaris-style sweep hoses including 180, 280, 360, 380, 480, and 3900 Sport models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install the replacement scrubber?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Remove the worn tail, push the Funmit scrubber onto the hose end, and rotate it slightly after wear to extend life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54193839177912,"sku":"B09XR1F31W","price":47.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-tail-scrubber-front-view.jpg?v=1790566692"},{"product_id":"funmit-stack-flue-sensor-replacement-for-pentair-sta-rite-mastertemp-42002-0024s-stainless-steel-direct-fit","title":"Funmit Stack Flue Sensor Replacement for Pentair Sta‑Rite \u0026 MasterTemp — 42002-0024S Stainless Steel, Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit 42002-0024S stack flue sensor is a direct-fit replacement sensor for Pentair MasterTemp and Sta-Rite Max‑E‑Therm pool and spa heaters that monitors flue temperature and helps prevent overheating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pentair MasterTemp or Sta‑Rite Max‑E‑Therm heater is showing flue-related fault codes or you need to restore reliable temperature sensing, this replacement sensor is engineered to match the original part number and fit. Constructed from stainless steel with a smooth threaded body, it installs quickly and restores the heater’s ability to detect excessive flue temperatures and trigger safety shutdowns when needed. The sensor operates across a wide temperature range and is intended as a like‑for‑like swap for OEM part 42002‑0024S.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor fix common heater error codes?\u003c\/h3\u003e\n\n\u003cp\u003eWhen the flue sensor stops sending correct temperature readings, the heater control may display errors such as E‑02, E‑05 or E‑06. Replacing a faulty sensor with this Funmit unit restores accurate flue temperature feedback so the control board can evaluate combustion safety and temperature limits. That helps the heater recover proper operation when the root cause is a bad sensor rather than a combustion or wiring fault.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM part number 42002‑0024S for direct compatibility\u003c\/li\u003e\n  \u003cli\u003eMonitors flue temperature to prevent readings above 500°F (260°C)\u003c\/li\u003e\n  \u003cli\u003eResolves sensor‑related error codes when wiring and controls are intact\u003c\/li\u003e\n  \u003cli\u003eQuick swap‑out installation in minutes with basic tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this sensor compatible with my Pentair or Sta‑Rite heater?\u003c\/h3\u003e\n\n\u003cp\u003eThis Funmit sensor is made for Pentair MasterTemp series and Sta‑Rite Max‑E‑Therm models SR200, SR333 and SR400. It’s designed as a universal replacement for the specified OEM part number—confirm your heater’s parts list or existing sensor label before ordering. If your heater uses the referenced part number, this unit will fit and function as the original sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended for Pentair MasterTemp electrical systems\u003c\/li\u003e\n  \u003cli\u003eFits Sta‑Rite Max‑E‑Therm SR200, SR333, SR400 models\u003c\/li\u003e\n  \u003cli\u003eVerify existing sensor shows part # 42002‑0024S prior to purchase\u003c\/li\u003e\n  \u003cli\u003eNot a universal substitute for unmatched part numbers or different connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Funmit stack flue sensor safely?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward but requires safety precautions: shut power to the heater and allow it to cool before touching the flue. The sensor has a threaded stainless steel body that screws into the flue assembly; use appropriate hand tools and gloves to avoid injury and overtightening. If you’re not comfortable working on gas or electrical appliances, hire a qualified technician to complete the replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off electrical power and fuel supply, and cool the heater fully\u003c\/li\u003e\n  \u003cli\u003eUnscrew the old sensor and thread in the new stainless steel unit\u003c\/li\u003e\n  \u003cli\u003eHand‑tighten, then secure with a wrench—do not overtighten\u003c\/li\u003e\n  \u003cli\u003eRestore power and test heater operation per manufacturer instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and materials?\u003c\/h3\u003e\n\n\u003cp\u003eThe Funmit 42002‑0024S replacement is built from durable stainless steel for corrosion resistance in high‑temperature flue environments. It operates across a broad temperature range, offers a direct fit to OEM dimensions, and is rated to help prevent flue gas output from exceeding 500°F. This combination of materials and specifications aims to provide long service life and reliable sensing performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel construction with smooth threaded body\u003c\/li\u003e\n  \u003cli\u003eOperating temperature from −20°C to 105°C (sensor spec range)\u003c\/li\u003e\n  \u003cli\u003eDesigned to detect and prevent flue temperatures above 500°F\u003c\/li\u003e\n  \u003cli\u003eOEM part number match: 42002‑0024S for direct replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool and spa owners, service technicians, and facility maintenance teams who operate Pentair MasterTemp or Sta‑Rite Max‑E‑Therm heaters and need a dependable, OEM‑matching flue temperature sensor. Choose this Funmit replacement if you want a quick, like‑for‑like swap to address sensor‑related fault codes, restore safe temperature monitoring, and keep your heater running reliably. If you’re unsure whether this is the correct part for your unit, check the current sensor’s part number or consult a certified service professional before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace part number 42002‑0024S on my heater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Funmit unit is a direct replacement for OEM part 42002‑0024S used in the listed Pentair and Sta‑Rite models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a technician to install the sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A competent DIYer can install it, but always cut power and gas first; hire a pro if you’re unsure about gas or electrical work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194153226424,"sku":"B0895CFWCY","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-42002-0024s-front-view.jpg?v=1790570220"},{"product_id":"funmit-c10-pool-cleaner-replacement-tires-3-pack-for-polaris-180-280-360-380-heavy-duty-rubber-oem-fit","title":"Funmit C10 Pool Cleaner Replacement Tires 3-Pack for Polaris 180\/280\/360\/380 — Heavy‑Duty Rubber, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eThese are three high‑quality Funmit replacement C10 tires engineered to restore traction and mobility to Polaris pressure-side pool cleaners (models 180, 280, 360, 380 and compatible variants).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Polaris cleaner drags, spins in place, or skips along the pool wall, worn tires are often the cause. The Funmit 3 Pack C10 tire replacements are made from heavy‑duty rubber and designed to meet OEM dimensions so your Vac‑Sweep or Black Max unit regains smooth, controlled movement on plaster, vinyl, pebble and concrete surfaces. They come as a cost‑effective three‑piece set, easy to install without special tools, and intended to extend the life and performance of your pressure‑side cleaner.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these tires improve my cleaner's movement?\u003c\/h3\u003e\n\u003cp\u003eReplacing old, hardened or torn tires with fresh Funmit C10 tires restores grip and even rolling, reducing wheel spin and erratic motion. Improved traction lets the cleaner traverse walls and floors more efficiently, so it covers more pool area per run.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores factory‑like traction and consistent rolling\u003c\/li\u003e\n  \u003cli\u003eReduces slippage on wet or smooth pool surfaces\u003c\/li\u003e\n  \u003cli\u003eEnhances overall navigation and coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these compatible with my Polaris model?\u003c\/h3\u003e\n\u003cp\u003eThese tires fit Polaris pressure‑side models 180, 280, 360 and 380 plus many related variants including Vac‑Sweep and Black Max series where the C10\/C‑10 (G4) part is specified. They also work with select TankTrax and TR series models listed by the manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Polaris 180, 280, 360, 380 models\u003c\/li\u003e\n  \u003cli\u003eCompatible with Vac‑Sweep, Black Max, TR and TankTrax variants\u003c\/li\u003e\n  \u003cli\u003eDesigned as direct replacements for Part # C10\/C‑10 (G4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and tool‑free: remove the old tire and slide the new Funmit C10 onto the wheel rim. Each tire can be replaced in minutes, so the full three‑tire swap typically takes under 10 minutes for most hobbyists.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo special tools required; hand‑fit onto wheel hubs\u003c\/li\u003e\n  \u003cli\u003eSimple step‑by‑step swap—each tire takes just minutes\u003c\/li\u003e\n  \u003cli\u003eIncludes three tires to service multiple wheels or a spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eFunmit C10 tires are molded from premium rubber chosen for flexibility and wear resistance in pool environments. They’re intended to withstand repeated wet\/dry cycles and contact with common pool surfaces without damaging finishes or losing shape quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium heavy‑duty rubber compound for long life\u003c\/li\u003e\n  \u003cli\u003eSafe for plaster, vinyl, PebbleTec, Marcite and concrete\u003c\/li\u003e\n  \u003cli\u003eManufactured to precise specs to meet OEM performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Funmit 3 Pack C10 replacement tires are ideal for pool owners and maintenance pros who run Polaris pressure‑side cleaners and need an affordable, OEM‑spec replacement to restore reliable traction and navigation. Choose this set if you want quick, tool‑free installs, compatibility with multiple Polaris variants, and durable rubber tires that protect pool finishes while boosting cleaning efficiency.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a Polaris Vac‑Sweep 360?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Funmit C10 tires are compatible with Polaris Vac‑Sweep 360 and other listed 180\/280\/380 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to replace these tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; each tire slips onto the wheel rim and can be replaced in minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194296357048,"sku":"B09SL5HJD6","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-c10-front-packaging.jpg?v=1790573219"},{"product_id":"funmit-pool-cleaner-c60-replacement-bearings-for-polaris-180-280-stainless-steel-tool-free-set","title":"Funmit Pool Cleaner C60 Replacement Bearings for Polaris 180\/280 — Stainless Steel, Tool-Free Set","description":"\u003cp\u003e\u003cstrong\u003eFunmit C60 wheel ball bearings are direct-fit replacement bearings for Polaris 180 and 280 pool cleaner wheels, sold in sets to restore smooth rotation and reliable operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Polaris 180 or 280 pressure-side cleaner is dragging, wobbling, or leaving scuff marks, worn C60 bearings in the wheel assemblies are a common cause. These Funmit C60 bearings pair stainless-steel balls with oxidation-resistant plastic races to replace the two bearings used per wheel (eight bearings per cleaner). Designed for an easy, tool-free swap, they get your cleaner rolling freely again without buying whole new wheels.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bearings restore my cleaner’s motion?\u003c\/h3\u003e\n\u003cp\u003eWorn bearings let the wheel tilt or seize, increasing friction and preventing smooth travel around the pool. Replacing them with precision-bearing C60s reduces drag and stabilizes wheel spin so the cleaner maintains its intended path and suction pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for Polaris 180 and 280 wheel assemblies\u003c\/li\u003e\n  \u003cli\u003eStainless steel balls reduce internal wear\u003c\/li\u003e\n  \u003cli\u003ePlastic outer race resists oxidation and pool chemicals\u003c\/li\u003e\n  \u003cli\u003eTwo bearings installed per wheel; eight needed per cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bearings easy to install without special tools?\u003c\/h3\u003e\n\u003cp\u003eYes — Funmit engineered the C60 bearings for quick replacement. The bearings press into the wheel hub and snap into place, letting most owners complete the swap with gloved hands in minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo special tools required for typical wheel assemblies\u003c\/li\u003e\n  \u003cli\u003eSimple hand-press installation—wear rubber gloves for grip\u003c\/li\u003e\n  \u003cli\u003eWorks with Polaris Quattro Sport as an additional compatibility option\u003c\/li\u003e\n  \u003cli\u003eInstructions: remove wheel, replace two bearings per wheel, reassemble\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eFunmit C60 bearings combine durable, oxidation-resistant plastic races with precision stainless-steel balls for a balance of corrosion resistance and long service life. They are built to withstand repeated wet\/dry cycles and common pool chemicals when properly installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty plastic races resist corrosion from pool water\u003c\/li\u003e\n  \u003cli\u003eStainless-steel precision balls minimize internal damage and wear\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce frequent wheel replacements and downtime\u003c\/li\u003e\n  \u003cli\u003eImproves overall cleaner efficiency and lifespan when replaced promptly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing bearings fix all wheel problems?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn C60 bearings solves most wheel-related issues like wobble and sticking, but it won’t correct damaged wheel hubs, cracked tires, or bent axles. Inspect the entire wheel assembly before replacing bearings to ensure bearings are the cause.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace bearings when wheels wobble or seize but hub is intact\u003c\/li\u003e\n  \u003cli\u003eInspect tires and axles; replace damaged parts as needed\u003c\/li\u003e\n  \u003cli\u003ePair bearing replacement with routine maintenance for best results\u003c\/li\u003e\n  \u003cli\u003eContact Funmit support for warranty or compatibility questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Funmit C60 replacement bearings are ideal for pool owners, service technicians, and retailers who maintain Polaris 180 or 280 pressure-side cleaners (and compatible Quattro Sport models). If your cleaner shows wheel play, uneven movement, or increased resistance, these bearings provide an affordable, do-it-yourself repair to restore smooth operation and extend the life of your existing wheel assemblies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many C60 bearings does a Polaris 180 or 280 need?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each cleaner needs eight C60 bearings in total—two bearings per wheel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install Funmit C60 bearings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs are tool-free; press bearings into the wheel hub by hand while wearing rubber gloves.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194507120824,"sku":"B089NJ1BX2","price":53.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-c60-front-packaging.jpg?v=1790576546"},{"product_id":"funmit-replacement-rubber-track-r0526100-compatible-with-zodiac-baracuda-mx8-mx6-durable-traction","title":"Funmit Replacement Rubber Track R0526100 — Compatible with Zodiac Baracuda MX8\/MX6, Durable Traction","description":"\u003cp\u003e\u003cstrong\u003eThis is a direct-fit replacement rubber track (R0526100) for Zodiac Baracuda MX8 and MX6 suction-side pool cleaners, engineered to restore traction and climbing performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your Baracuda MX8 or MX6 cleaner is slipping, struggling to climb walls, or showing visible wear on its drive tracks, replacing the worn tires with a fresh pair of R0526100 tracks can bring the unit back to reliable operation. Funmit supplies heavy-duty rubber tracks designed to match the original fit and tooth profile so installation is straightforward and performance is consistent with factory expectations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the R0526100 track improve my cleaner’s movement?\u003c\/h3\u003e\n\u003cp\u003eWorn tracks lose the small internal teeth and outer grip pattern that let the cleaner pull itself across floors and ascend pool walls. Fitting new R0526100 tracks renews the interface between wheel and surface so the cleaner can regain smooth forward motion and traction on inclines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores tooth engagement for better crawling and turning.\u003c\/li\u003e\n  \u003cli\u003eImproves climb on slopes and vertical wall sections.\u003c\/li\u003e\n  \u003cli\u003eReduces slipping and stalled movement caused by smooth or torn tracks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and durability benefits of these replacement tires?\u003c\/h3\u003e\n\u003cp\u003eThe tracks are molded from strengthened rubber designed to resist tearing and abrasion in chlorinated and mineral pool water. Their construction maintains shape and bite under normal use, extending the operational life of the cleaner compared with heavily worn factory tracks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuper-strong rubber resists cracking and excessive stretch.\u003c\/li\u003e\n  \u003cli\u003eReinforced profile preserves tooth geometry for longer.\u003c\/li\u003e\n  \u003cli\u003eEngineered to work in suction-side cleaners without degrading quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation—do I need tools or special skills?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentionally tool-free for most users: you can swap the old tracks for the R0526100 replacements by hand in under ten minutes. A hair dryer or brief sun exposure softens the tracks and makes it easier to stretch them onto the drive rollers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePull old track from panel and push new track onto wheel—no tools required.\u003c\/li\u003e\n  \u003cli\u003eWarm the track slightly to improve flexibility during fitment.\u003c\/li\u003e\n  \u003cli\u003eTypical pair replacement time: under 10 minutes for both sides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace my MX6 or MX8 cleaner tracks?\u003c\/h3\u003e\n\u003cp\u003eInspect the tracks when the cleaner shows movement issues or during routine maintenance. Look for missing internal teeth, deep gouges, stretching, or rubber flaking—any of these signs indicate the track has lost effective traction and should be replaced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace if internal teeth are worn, broken, or missing.\u003c\/li\u003e\n  \u003cli\u003eSwap tracks when slipping, stalled climbs, or irregular travel occur.\u003c\/li\u003e\n  \u003cli\u003eConsider replacement as preventive maintenance to avoid motor strain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and maintenance professionals using Zodiac Baracuda MX8 or MX6 suction-side cleaners who need a durable, OEM-compatible track replacement. This product suits anyone comfortable doing a quick, tool-free part swap to restore cleaning efficiency and extend their cleaner’s usable life. If you prefer hands-on repairs or want to keep maintenance costs low, the Funmit R0526100 track is a practical, budget-friendly component to have on hand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tracks compatible with Zodiac Baracuda MX8 and MX6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Funmit R0526100 tracks are designed to fit the Baracuda MX8 and MX6 suction-side cleaners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and are tools required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation is typically under 10 minutes, tool-free; warming the track improves stretch for easier fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194516558008,"sku":"B089K9DS9P","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-r0526100-front-view.jpg?v=1790576729"},{"product_id":"funmit-polaris-280-480-replacement-filter-bag-9-8x10-2-k13-k16-connector-0-8mm-mesh-high-capacity","title":"Funmit Polaris 280\/480 Replacement Filter Bag 9.8x10.2\" K13\/K16 Connector, 0.8mm Mesh High-Capacity","description":"\u003cp\u003e\u003cstrong\u003eFunmit replacement filter bag for Polaris 280 and 480 pool cleaners is a durable, easy‑to‑install micro‑filtration bag sized 9.8\" x 10.2\" with a 2.3\" connector plug, built to trap fine debris while preserving water flow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplacing worn or torn cleaner bags keeps your automatic pool vacuum working at peak efficiency. This Funmit filter bag is engineered to match K13\/K16 style connectors for Polaris 280 and 480 models, featuring a tightly woven mesh and reinforced cuff for secure attachment. It opens on two sides for fast emptying and is made with rugged plastics to resist abrasion from concrete or tile surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this bag fit my Polaris 280 or 480 cleaner?\u003c\/h3\u003e\n\u003cp\u003eThe Funmit bag is sized and shaped to match the K13\/K16-style fittings used on Polaris 280 and 480 pressure-side cleaners. Confirm your cleaner’s model and connector type before ordering to avoid compatibility issues; this bag is not for Polaris 360\/380\/180 models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBag dimensions: 9.8\" x 10.2\"\u003c\/li\u003e\n  \u003cli\u003eConnector plug diameter: 2.3\"\u003c\/li\u003e\n  \u003cli\u003eDesigned for K13\/K16 replacement on Polaris 280\/480\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Polaris 360\/380\/180\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and effective is the mesh at trapping debris?\u003c\/h3\u003e\n\u003cp\u003eThe bag uses a 0.8 mm tightly woven mesh that captures leaves, twigs and particles down to roughly 0.2\", while still allowing unrestricted water circulation through the cleaner. Reinforced seams and upgraded clips increase abrasion resistance and help prevent tears when the cleaner scrapes rough pool surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTightly woven 0.8 mm mesh for fine filtration\u003c\/li\u003e\n  \u003cli\u003eTraps debris as small as 0.2\" while maintaining flow\u003c\/li\u003e\n  \u003cli\u003e40% higher seam strength vs standard designs\u003c\/li\u003e\n  \u003cli\u003eSecure clips that prevent accidental detachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation and maintenance simple?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows a straightforward remove-and-snap procedure: turn off the pump, remove the cleaner, loosen the old cuff, discard damaged bags, then align and snap the new bag into place. The bag’s two-sided openings and flexible cuff let you empty and rinse trapped debris without wrestling the material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-side openings for fast emptying and rinsing\u003c\/li\u003e\n  \u003cli\u003ePlastic cuff designed to align with pressure paddles\u003c\/li\u003e\n  \u003cli\u003eTool-free install: twist cuff to release, align arrow and snap on\u003c\/li\u003e\n  \u003cli\u003eMade from engineered plastics for repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much debris can the bag hold and how does it affect performance?\u003c\/h3\u003e\n\u003cp\u003eThis replacement holds roughly 1.2 gallons of debris in its large-capacity chamber without compressing, so it accommodates typical cleanup cycles before needing emptying. Because the mesh maintains good water flow, the cleaner keeps operating efficiently even as the bag fills.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge-capacity bag stores ~1.2 gallons of debris\u003c\/li\u003e\n  \u003cli\u003eMaintains optimal water flow to the cleaner\u003c\/li\u003e\n  \u003cli\u003eWorks for everyday pool maintenance and frequent leaf loads\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand repeated cleaning cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners or service professionals who use Polaris 280 or 480 pressure-side cleaners and need a reliable K13\/K16-style replacement bag. Choose Funmit if you want a heavy-duty, tightly woven filter bag that’s easy to install, simple to maintain, and built to resist abrasion and tearing during routine pool cleaning.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bag fit my Polaris 280 or 480 cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Funmit bag is K13\/K16-compatible and sized for Polaris 280 and 480. It is not compatible with Polaris 360\/380\/180 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install the replacement filter bag?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Turn off the booster pump, remove the cleaner, loosen the old cuff, align the new bag’s paddle slots and arrow, then slide the cuff down until it snaps into place.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194516492472,"sku":"B089NFS6W6","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-view-packaging.jpg?v=1790576728"},{"product_id":"funmit-pool-cleaner-diaphragm-replacement-kit-for-zodiac-baracuda-g3-g4-4-silicone-diaphragms-with-retaining-rings-tool-free-in","title":"Funmit Pool Cleaner Diaphragm Replacement Kit for Zodiac Baracuda G3 G4 — 4 Silicone Diaphragms with Retaining Rings, Tool-Free In","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit W69698 is a heavy-duty silicone diaphragm kit that restores consistent suction and motion to compatible Zodiac Baracuda pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Baracuda G3, G4, Alpha, Zoom, Ranger, or Wahoo cleaner has started to stall, chatter, or stop moving, the diaphragm is a common wear item that controls the cleaner's internal water flow. This replacement set from Funmit includes four long-life silicone diaphragms plus four retaining rings, engineered to meet or exceed OEM performance for longer service and easier, tool-free swaps.\u003c\/p\u003e\n\n\u003ch3\u003eHow will replacing the diaphragm improve my pool cleaner's performance?\u003c\/h3\u003e\n\u003cp\u003eA worn or torn diaphragm allows water flow to fluctuate, which can cause a cleaner to start and stop or lose traction. Installing a fresh W69698 diaphragm stabilizes the pulse mechanism so the cleaner moves consistently and maintains suction at the intake. You should notice fewer stalls, more even coverage, and reduced time spent resetting the cleaner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces torn or brittle diaphragms that cause irregular movement.\u003c\/li\u003e\n  \u003cli\u003eRestores steady internal water pulses for reliable navigation.\u003c\/li\u003e\n  \u003cli\u003eHelps cleaner maintain suction and pick up debris more consistently.\u003c\/li\u003e\n  \u003cli\u003eReduces maintenance cycles by improving operational stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these diaphragms easy to install without tools?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is designed for quick, tool-free replacement so you can swap the part poolside in a few minutes. The diaphragm snaps into place and uses the included retaining ring to secure it. Follow basic safety steps like turning off circulation and removing the cleaner from the pool before servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSnap-in design removes the need for screwdrivers or specialty tools.\u003c\/li\u003e\n  \u003cli\u003eEach replacement takes roughly 30 seconds once the old part is removed.\u003c\/li\u003e\n  \u003cli\u003eClear fitment instructions reduce risk of incorrect assembly.\u003c\/li\u003e\n  \u003cli\u003eIncludes retaining rings (W81600) for a complete installation set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pool cleaners are compatible with Funmit W69698 diaphragms?\u003c\/h3\u003e\n\u003cp\u003eFunmit engineered this diaphragm to be compatible with a broad range of Zodiac-style cleaners. The kit fits Baracuda G3 and G4 models as well as Alpha 2 and Alpha 3 units, and it is also suitable for several Baracuda variants like Zoom, Ranger, and Wahoo. Confirm your model number before ordering to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Zodiac Baracuda G3 and G4 series.\u003c\/li\u003e\n  \u003cli\u003eCompatible: Zodiac Alpha 2 and Alpha 3 models.\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Baracuda Zoom, Ranger, and Wahoo cleaners.\u003c\/li\u003e\n  \u003cli\u003ePackage includes 4 diaphragms plus 4 retaining rings for multiple replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and lifespan can I expect from this replacement part?\u003c\/h3\u003e\n\u003cp\u003eThese diaphragms are molded from a high-grade silicone resin built to resist tearing, cracking, and deformation from pool chemicals and repeated flexing. Funmit rates them for extended service life — typically lasting about twice as long as standard diaphragms under normal conditions. Proper storage and avoiding prolonged exposure to direct sunlight will help maximize longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from durable silicone resin for flexibility and strength.\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist common pool chemicals and mechanical fatigue.\u003c\/li\u003e\n  \u003cli\u003eEstimated life roughly double that of ordinary diaphragms in regular use.\u003c\/li\u003e\n  \u003cli\u003eShips as a 4-pack for multi-season maintenance or multiple cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners, maintenance pros, and repair technicians who use Zodiac-style Baracuda cleaners and want a reliable, long-life diaphragm replacement will benefit from this kit. It’s ideal if you need a straightforward, affordable way to fix intermittent cleaner stopping, restore consistent movement, or stock up on spares before the cleaning season. Funmit backs the part with customer support to help if fit or performance questions arise.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many diaphragms are included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains four W69698 diaphragms and four W81600 retaining rings for multiple replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my Baracuda G3 or Alpha 2 cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the W69698 is compatible with Baracuda G3, G4, Alpha 2, Alpha 3, and several Baracuda variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194563317944,"sku":"B089K35R6Y","price":53.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-w69698-front-packaging.jpg?v=1790577316"},{"product_id":"funmit-polaris-360-380-replacement-zippered-filter-bags-2-pack-nylon-mesh-abs-connector","title":"Funmit Polaris 360\/380 Replacement Zippered Filter Bags 2-Pack — Nylon Mesh, ABS Connector","description":"\u003cp\u003e\u003cstrong\u003eFunmit Pool Spa zippered replacement bags are durable nylon mesh filter bags designed to fit Polaris 360 and 380 pool cleaners and capture dirt, leaves, and debris while restoring suction performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your Polaris 360 or 380 cleaner is collecting less debris or the bag is worn, swapping in a pair of new Funmit zippered bags is a quick, inexpensive fix. These replacement bags use tightly woven nylon mesh, reinforced stitching, and ABS connectors so they hold up to repeated cleanings and heavy debris loads while staying lightweight. They arrive as a two-pack and are built specifically for the Polaris 360 and 380 models (part numbers 9-100-1014 and 9-100-1021) — not compatible with Polaris 280, 480, or 180 variants.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bags improve my pool cleaner's performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a clogged or damaged bag restores the cleaner’s ability to collect dirt and allows water to flow through the filtration system properly. The zippered closure makes emptying quick and avoids tearing the mesh during handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTightly woven nylon traps fine debris without restricting flow.\u003c\/li\u003e\n  \u003cli\u003eZipper closure simplifies dumping and prevents spills.\u003c\/li\u003e\n  \u003cli\u003eDurable ABS connector keeps the bag securely attached under operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bags easy to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eYes — the Funmit bags are designed for fast installation and straightforward care. Hook-and-loop fastening plus a molded connector mean the bag snaps into place and comes off in seconds for rinsing or drying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick-release hook-and-loop for fast swaps.\u003c\/li\u003e\n  \u003cli\u003eZipper lets you empty contents without touching debris.\u003c\/li\u003e\n  \u003cli\u003eMachine-rinseable or hose-cleanable for repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Polaris models do these replacement bags fit?\u003c\/h3\u003e\n\u003cp\u003eThese Funmit zippered filter bags are engineered specifically for Polaris 360 and 380 cleaners (9-100-1014, 9-100-1021). They will not work with Polaris 280, 480, or 180 models that use different clip or Velcro attachment styles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Polaris 360 and 380 (listed part numbers).\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Polaris 280, 480 (oval clips) or 180 (Velcro style).\u003c\/li\u003e\n  \u003cli\u003eCheck your cleaner’s connector style before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability features?\u003c\/h3\u003e\n\u003cp\u003eFunmit uses reinforced stitching and a dense nylon weave to resist tearing and stretching. The ABS plastic connector and robust zipper are chosen to handle repeated pool cycles and exposure to water and cleaning chemicals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty nylon mesh resists abrasion and holds fine debris.\u003c\/li\u003e\n  \u003cli\u003eReinforced seams reduce risk of seam failure under load.\u003c\/li\u003e\n  \u003cli\u003eDurable ABS connector secures the bag and resists chlorine exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Funmit replacement bags suit pool owners and maintenance professionals who use Polaris 360 or 380 automatic cleaners and want an affordable way to restore pickup efficiency without replacing the entire cleaner. They’re ideal if your current bag is torn, stretched, or full of trapped debris and you need a reliable, easy-to-clean spare. Confirm your Polaris model and connector type before purchase to ensure proper fit. If you need assistance, Funmit customer service is available to help with fit questions or quality concerns.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bags fit my Polaris 360 or 380 cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these two bags fit Polaris 360 and 380 models (part numbers 9-100-1014 and 9-100-1021).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I clean the Funmit zippered bags with a hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—simply unzip and rinse with a hose; the nylon mesh and ABS connector are designed for repeated cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194765660344,"sku":"B089N4YPTT","price":56.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-view-packaging_7e8d8cfd-97a0-4c02-8059-8a911effa822.jpg?v=1790578722"},{"product_id":"funmit-pool-cleaner-replacement-bags-for-polaris-280-480-k13-k16-zippered-0-8mm-micro-mesh-reinforced-seams","title":"Funmit Pool Cleaner Replacement Bags for Polaris 280\/480 K13 K16 – Zippered 0.8mm Micro‑Mesh, Reinforced Seams","description":"\u003cp\u003e\u003cstrong\u003eFunmit zippered replacement pool bags are drop-in K13\/K16 compatible filter bags built for Polaris 280 and 480 cleaners, combining fine micro-filtration with reinforced seams for longer life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you own a Polaris 280 or 480, maintaining peak suction and keeping your pool free of leaves, gravel and twigs depends on having the right collector bags. These Funmit replacement bags are engineered specifically for K13\/K16 sweep assemblies and are not meant for Polaris 360\/380\/180 models. They focus on capturing small debris while preserving water flow and resisting abrasion from rough surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bags capture fine debris without clogging the cleaner?\u003c\/h3\u003e\n\u003cp\u003eFunmit bags use a tightly woven 0.8mm mesh that performs 360° micro-filtration, trapping particles down to about 0.2 inches while still allowing water to pass through freely. The design balances filtration and throughput so the cleaner maintains suction rather than overworking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.8mm tightly woven mesh for fine particle capture\u003c\/li\u003e\n  \u003cli\u003e360° filtration surface area to reduce localized clogging\u003c\/li\u003e\n  \u003cli\u003eMaintains optimal water flow to preserve suction efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these replacement bags strong enough for rough pool floors?\u003c\/h3\u003e\n\u003cp\u003eYes — the Funmit 280\/480 bags have reinforced seams and improved clip attachments to resist tearing during routine pulls across concrete, vinyl or pebble finishes. Seams are engineered for higher tensile strength so the bag endures repeated scraping and contact with sharp debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e40% greater seam strength versus standard designs\u003c\/li\u003e\n  \u003cli\u003eUpgraded clips lock securely into sweep assemblies\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant construction to limit rips and frays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to empty and maintain these zippered bags?\u003c\/h3\u003e\n\u003cp\u003eThe wide zippered opening simplifies removal of compacted leaves and dirt so you can dump debris quickly and rinse the bag. Cleaning is quick: unzip, shake or rinse with a hose, and reattach — no cumbersome tugging or trapped debris to fight with.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra-wide zipper for fast, low-mess emptying\u003c\/li\u003e\n  \u003cli\u003eMachine-like capacity holds about 1.2 gallons without compression\u003c\/li\u003e\n  \u003cli\u003eSimple rinse and dry for routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bags fit my Polaris model and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eThese Funmit bags are specifically tailored for Polaris 280 and 480 cleaners using K13\/K16-style bags and are not compatible with Polaris 360\/380\/180 series. Verify your cleaner’s model number and the bag type (K13\/K16) to ensure proper fit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Polaris 280 \u0026amp; 480 K13\/K16 sweep systems\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Polaris 360, 380, or 180 models\u003c\/li\u003e\n  \u003cli\u003eCheck your cleaner model and existing bag shape before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and maintenance professionals who use Polaris 280 or 480 cleaners and want a higher-capacity, longer-lasting replacement bag that traps small debris without sacrificing water flow. If you need robust seam strength, secure clip attachments, and an easy-to-empty zippered opening, these Funmit replacement bags offer a practical upgrade for routine pool upkeep.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Funmit bags compatible with Polaris 280 and 480?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These Funmit zippered bags are made for Polaris 280 and 480 models using K13\/K16 replacement bags.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean and empty the Funmit replacement bag?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Unzip the wide opening, empty debris, then rinse with a hose and allow to air dry before reinstalling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194978521272,"sku":"B09R9MXSRK","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-view-zippered-pool-bag.jpg?v=1790580576"},{"product_id":"funmit-high-limit-temperature-switch-for-pentair-spa-pool-heaters-135-f-direct-replacement-42001-0063s","title":"Funmit High-Limit Temperature Switch for Pentair Spa\/Pool Heaters — 135°F Direct Replacement (42001-0063S)","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit 42001-0063S is a direct-replacement high-limit temperature switch (135°F) designed to shut off your Pentair-compatible pool or spa heater when water gets too hot.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a heater runs hotter than intended, a reliable high-limit switch is the safety component that interrupts power to the heat exchanger. This replacement part matches several Pentair and Sta-Rite models and restores the safety cutoff function quickly and affordably, helping you avoid costly service calls or prolonged downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWhich heaters will this high-limit switch work with?\u003c\/h3\u003e\n\u003cp\u003eThis Funmit sensor is built to replace OEM part numbers used across multiple Pentair\/Sta‑Rite families, including MasterTemp and Max‑E‑Therm units. Always verify the original part number before purchase to ensure a match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Pentair, Sta‑Rite, MasterTemp, Max‑E‑Therm heaters\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers 42001-0063S, 42001-0064S, HMXHLI2932, HAXHLI1930, STA-151-6255\u003c\/li\u003e\n  \u003cli\u003eDesigned for systems using a 135°F high-limit threshold\u003c\/li\u003e\n  \u003cli\u003eFits the same mounting and electrical connector locations as the originals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation typically go?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic heater maintenance and simple electrical disconnects. The switch mounts in the existing sensor opening and plugs into the same connector, so you can often finish the swap in minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove power to the heater before starting\u003c\/li\u003e\n  \u003cli\u003eUnplug the original sensor and slide the new Funmit unit into position\u003c\/li\u003e\n  \u003cli\u003eReconnect the electrical connector and secure the switch in place\u003c\/li\u003e\n  \u003cli\u003eNo special tools or calibration required for most models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat function does this high-limit switch perform?\u003c\/h3\u003e\n\u003cp\u003eThe device monitors water\/heat exchanger temperature and opens its contact when the threshold is reached, cutting power to the heater element or gas control. It’s a safety interlock—preventing overheating and protecting the heater’s components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSenses temperature and opens circuit at approximately 135°F\u003c\/li\u003e\n  \u003cli\u003eStops the heater from continuing to heat once the limit is exceeded\u003c\/li\u003e\n  \u003cli\u003eHelps protect the exchanger and surrounding components from excessive heat\u003c\/li\u003e\n  \u003cli\u003eFunctions as a passive, mechanical\/electrical safety device\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan replacing this switch save me money?\u003c\/h3\u003e\n\u003cp\u003eYes—installing a compatible Funmit replacement is typically far less expensive than dealer parts or a service visit. It lets you restore proper safety operation quickly and delays or avoids larger repairs when the failure is limited to the high-limit sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLower cost than many OEM dealer parts\u003c\/li\u003e\n  \u003cli\u003eQuick DIY swap reduces labor expenses\u003c\/li\u003e\n  \u003cli\u003eRestores heater safety and operation without full system replacement\u003c\/li\u003e\n  \u003cli\u003eBacked by Funmit customer support for quality concerns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners and technicians of Pentair and Sta‑Rite pool or spa heaters who need an affordable, direct-fit high-limit replacement. If your heater is tripping or you’ve identified a failed high-limit sensor, the Funmit 42001-0063S gives a fast, compatible option to restore safe operation without expensive downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this an exact replacement for part 42001-0063S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this Funmit unit is a direct replacement for 42001-0063S and several equivalent part numbers. Verify your old part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a technician to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most owners can swap it themselves after cutting power; if you’re uncomfortable with electrical work, hire a qualified technician.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54194989629624,"sku":"B0895C3Z5Q","price":54.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-42001-0063s-front-view.jpg?v=1790580699"},{"product_id":"funmit-front-tire-replacement-for-hayward-pool-cleaners-blue-pair-7-7-od-0-9-thick","title":"Funmit Front Tire Replacement for Hayward Pool Cleaners — Blue Pair, 7.7\" OD, 0.9\" Thick","description":"\u003cstrong\u003eThese are Funmit replacement blue front tires (model 896584000-143) made to fit Hayward 2X, 4X and pressure-side pool cleaners, restoring smooth steering and preventing hang-ups over main drains.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Hayward-style pressure or suction pool cleaner is skipping, snagging on main drains, or showing worn front tires, these Funmit blue front tires provide an affordable, heavy-duty replacement. Manufactured from resilient rubber and supplied as a pair, each tire measures 7.7\" outer diameter, 6.2\" inner diameter and 0.9\" thick. They’re engineered to match rail fit dimensions and restore consistent contact with pool surfaces, helping the cleaner move freely across floors and walls.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these tires improve cleaner movement?\u003c\/h3\u003e\n\u003cp\u003eReplacing old, cracked or flattened tires restores the original geometry between the cleaner body and pool surface. That improves steering response, reduces the chance of the unit getting caught on grates or drains, and helps maintain proper suction balance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickness of 0.9\" provides cushion and traction for uneven pool surfaces\u003c\/li\u003e\n  \u003cli\u003ePrecise inner diameter (6.2\") ensures snug fit on standard shafts\u003c\/li\u003e\n  \u003cli\u003eBlue heavy-duty rubber resists splitting and abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tires fit my Hayward 2X, 4X or pressure cleaner?\u003c\/h3\u003e\n\u003cp\u003eYes — the Funmit 896584000-143 tires were designed to match the mounting dimensions used on many Hayward-style 2X, 4X and pressure-side models. They’re intended as direct front tire replacements for units that require the specified diameters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter 7.7\" matches the original part footprint\u003c\/li\u003e\n  \u003cli\u003eInner diameter 6.2\" fits common front axle sizes without alteration\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two for both front wheels on the cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and can typically be completed in under five minutes per wheel with no special tools. The tires stretch over the wheel hubs and seat onto the rim; removal is the reverse process. This quick swap avoids downtime and gets your cleaner back to work fast.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo adhesive or specialty tools required for most installs\u003c\/li\u003e\n  \u003cli\u003eFast replacement — usually less than five minutes to change both tires\u003c\/li\u003e\n  \u003cli\u003eEasy to clean and inspect during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these tires made of and how long do they last?\u003c\/h3\u003e\n\u003cp\u003eFunmit uses a heavy-duty rubber compound engineered for flexibility and wear resistance in wet, chlorinated environments. Longevity depends on pool conditions and frequency of use, but the construction aims to resist cracking and flattening compared with low-quality replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable rubber reduces abrasion from pool surfaces\u003c\/li\u003e\n  \u003cli\u003eDesigned for stability under normal pool cleaning cycles\u003c\/li\u003e\n  \u003cli\u003eManufacturing tests confirm consistent size and fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and technicians who need a cost-effective, reliable replacement for worn Hayward-style front tires. If your pressure-side or suction cleaner is hanging on grates or main drains, or the front wheels show visible wear, these Funmit tires offer an easy, quick upgrade that restores smoother navigation without expensive OEM parts. Funmit supports customers with purchase assistance and stands behind product quality — contact customer service if you encounter fit or quality issues.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tires fit my Hayward 2X or 4X cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These Funmit tires are sized to match many Hayward 2X, 4X and pressure-side front wheels using the stated diameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the tires myself without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually yes. Most installations require no special tools and take under five minutes to complete per wheel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54197124595896,"sku":"B089JY6955","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-tires-packaging.jpg?v=1790587855"},{"product_id":"funmit-replacement-tires-for-pentair-legend-pool-cleaner-4-pack-direct-fit-llc1-360007-grooved-tread-for-better-traction","title":"Funmit Replacement Tires for Pentair Legend Pool Cleaner 4-Pack — Direct-Fit LLC1\/360007, Grooved Tread for Better Traction","description":"\u003cp\u003e\u003cstrong\u003eThese Funmit LLC1 \/ 360007 replacement rubber tires are a direct-fit 4-pack designed to restore traction and mobility to Pentair Legend and Kreepy Krauly Legend pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your automatic pool cleaner starts slipping or dragging, replacing worn tires is a quick, affordable way to get it moving smoothly again. Funmit engineered these tires to match the dimensions and tread pattern of Pentair part numbers 360007, LLC1 and EC10, making them suitable replacements for a range of Legend-series cleaners. The set contains four tires sized to replicate the original specs so you can swap all wheels at once for balanced performance.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tires fit my Pentair Legend or Kreepy Krauly model?\u003c\/h3\u003e\n\n\u003cp\u003eYes—these tires are made to be compatible with multiple Pentair Legend and Kreepy Krauly Legend series cleaners. They replicate the original part numbers so installation is straightforward on matching models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for Pentair 360007, LLC1, EC10 parts.\u003c\/li\u003e\n  \u003cli\u003eFits Pentair Legend 4-wheel model LL105 and similar units.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Kreepy Krauly Legend models LL505G, LL505GG and Legend II LX5000G, LX5000GG.\u003c\/li\u003e\n  \u003cli\u003eSold as a 4-pack to replace all wheels and restore even wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these tires improve cleaner performance?\u003c\/h3\u003e\n\n\u003cp\u003eThe tires use a grooved rubber tread to increase grip across common pool surfaces, helping the cleaner maintain contact and maneuver over slopes or textured finishes. Better traction reduces skipped spots and helps the cleaner navigate walls and floors more efficiently.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGrooved tread pattern for enhanced traction on plaster, concrete, Pebble Tec and marcite finishes.\u003c\/li\u003e\n  \u003cli\u003eRubber compound designed to resist wear and cracking in pool conditions.\u003c\/li\u003e\n  \u003cli\u003eUniform dimensions to preserve balance and steering behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact tire dimensions and package contents?\u003c\/h3\u003e\n\n\u003cp\u003eEach tire in the package matches the size profile of the original Pentair parts so they seat correctly on the wheel hubs. The set includes four replacement tires so you can change every wheel in one service session.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage: 4-pack of Funmit 360007 pool cleaner rubber tires.\u003c\/li\u003e\n  \u003cli\u003eNominal dimension: approximately 8 inches length × 3 inches height × 12 inches width profile (manufacturer-stated sizing).\u003c\/li\u003e\n  \u003cli\u003ePre-shaped tread and hub opening sized for direct installation on compatible models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will my cleaner need extra adjustments?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is typically simple and mirrors the original tire swap process used on Pentair cleaners—no special tools required beyond those usually used for wheel removal. Replacing all four tires at once helps maintain proper alignment and handling, and no extra calibration is generally necessary.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSwap each worn tire for a Funmit replacement in minutes.\u003c\/li\u003e\n  \u003cli\u003eNo adhesives or trimming usually required—fits original wheel hubs.\u003c\/li\u003e\n  \u003cli\u003eReplacing all four avoids uneven wear and steering issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool owners, maintenance professionals and service shops that operate Pentair Legend or Kreepy Krauly Legend automatic cleaners and need a dependable, cost-effective replacement for worn tires. If your cleaner is losing traction, skipping areas, or making unusual sounds due to degraded wheels, this 4-pack offers a straightforward solution to restore performance. Funmit backs these parts with customer support to help with fit or quality questions so you can replace parts with confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tires fit Pentair 360007 and LLC1 parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are made as direct replacements for Pentair part numbers 360007, LLC1 and EC10 and fit the listed Legend models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires are included and do I need to replace all four?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package contains four tires. Replacing all four at once ensures balanced traction and better steering performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54198205317304,"sku":"B089NDXQQG","price":58.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-packaging-funmit-llc1-360007-tires.jpg?v=1790589421"},{"product_id":"funmit-seal-disc-replacement-for-zodiac-baracuda-g2-g3-g4-w70329-rubber-seal-direct-fit-suction-restore","title":"Funmit Seal Disc Replacement for Zodiac Baracuda G2 G3 G4 – W70329 Rubber Seal, Direct-Fit Suction Restore","description":"\u003cp\u003e\u003cstrong\u003eThe Funmit W70329 seal disc is a durable rubber replacement part designed to restore suction and smooth movement to Zodiac Baracuda G2, G3 and G4 pool cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or damaged seal disc reduces cleaning performance, this direct-fit replacement is engineered to bring your Baracuda cleaner back to efficient operation without needing a full unit replacement. Made from resilient rubber, the Funmit seal disc fits multiple Zodiac part numbers and common Baracuda models so you can quickly refresh the moving parts that keep your cleaner gripping the pool surface and maintaining suction.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Baracuda models and part numbers does this seal disc fit?\u003c\/h3\u003e\n\u003cp\u003eThe Funmit W70329 seal disc is cross-compatible with a wide range of Baracuda cleaners and OEM part references. It was made to match dimensions and mounting points for both newer and older model variants so installation is straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Zodiac Baracuda G2, G3, G4 series.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit part numbers: W70464 (G2), W70329 (Newer G3), W46666 (Older G3), W83277 (G4).\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with Alpha and Manta variants: W47521, W49655, W49610, W70032.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Funmit seal disc and what surfaces will it work on?\u003c\/h3\u003e\n\u003cp\u003eConstructed from premium rubber, the seal disc resists cracking and wear from regular pool use. It performs well across common pool finishes and is designed to withstand repeated installation and cleaning cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: heavy-duty rubber for long service life.\u003c\/li\u003e\n  \u003cli\u003eSuitable surfaces: plaster, tile, pebble, vinyl, and fiberglass pools.\u003c\/li\u003e\n  \u003cli\u003eReusable: removes and re-installs cleanly when servicing cleaner components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eReplacing the seal disc is a simple maintenance task that most pool owners can complete without specialized equipment. The disc aligns with the factory mounting points and slips into place, reducing downtime for your cleaner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: basic hand tools only (screwdriver or pliers depending on model).\u003c\/li\u003e\n  \u003cli\u003eNo adhesives required: designed for a snug, mechanical fit.\u003c\/li\u003e\n  \u003cli\u003eQuick swap: most installations take only a few minutes once the cleaner is open.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part restore cleaning performance and how should I maintain it?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn seal disc can noticeably improve traction, suction consistency, and the cleaner’s ability to climb walls and traverse pool surfaces. Regular inspection and occasional cleaning will keep the part functioning longer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintenance tips: rinse with fresh water, remove debris and check for nicks or tears.\u003c\/li\u003e\n  \u003cli\u003eWhen to replace: if you notice slipping, poor suction, or visible wear.\u003c\/li\u003e\n  \u003cli\u003eStorage: keep away from prolonged sunlight and harsh chemicals when not installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Funmit W70329 seal disc is ideal for pool owners and service technicians who want an affordable, OEM-compatible replacement to restore a Zodiac Baracuda G2\/G3\/G4 cleaner’s performance. It suits anyone maintaining plaster, tile, pebble, vinyl, or fiberglass pools who prefers a durable, reusable part that installs quickly and extends the life of their cleaner.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Funmit W70329 seal disc a direct replacement for Zodiac parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it matches several Zodiac part numbers including W70464, W46666, W83277 and fits G2\/G3\/G4 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the seal disc?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace when you see reduced suction, slipping, or visible wear; inspect during routine cleaner service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54199586980024,"sku":"B089KHVZR1","price":69.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-seal-disc-front-view.jpg?v=1790596699"},{"product_id":"funmit-c10-pool-cleaner-replacement-tires-6-pack-fits-polaris-180-280-360-380-heavy-duty-rubber","title":"Funmit C10 Pool Cleaner Replacement Tires 6-Pack — fits Polaris 180\/280\/360\/380, Heavy-Duty Rubber","description":"\u003cp\u003e\u003cstrong\u003eReplacement set of six Funmit C10 rubber tires designed to restore traction and mobility to Polaris pressure-side pool cleaners (models 180, 280, 360, 380 and compatible variants).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Polaris pressure-side cleaner is slipping, stalling, or leaving tracks, worn tires are often the culprit. These Funmit C10 replacement tires are molded from heavy-duty rubber to match OEM fit and function, offering a budget-friendly way to revive a Vac-Sweep or Black Max style cleaner without buying a new unit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Polaris models will these Funmit C10 tires work with?\u003c\/h3\u003e\n\u003cp\u003eThese tires were engineered to fit a wide range of Polaris pressure-side cleaners that use the C10\/C-10 (G4) part. They also fit many Vac-Sweep and Black Max variants where the OEM part is specified as C10.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Polaris 180, 280, 360, 380 models\u003c\/li\u003e\n  \u003cli\u003eFits Vac-sweep 280, 360, 380 and 280 TankTrax, TR28P\u003c\/li\u003e\n  \u003cli\u003eCan be used on some Black Max and TR-series cleaners where C10 is specified\u003c\/li\u003e\n  \u003cli\u003eNot intended for units that require the larger C11 Max Trax tires unless specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing Funmit C10 tires improve cleaning performance?\u003c\/h3\u003e\n\u003cp\u003eFresh tires restore grip and track control, which helps the cleaner maintain consistent motion and better contact with pool surfaces. Improved traction reduces slippage and chaotic movement so the cleaner can cover more area and pick up debris more effectively.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores lateral traction for even coverage across floors and walls\u003c\/li\u003e\n  \u003cli\u003eReduces stalling and repetitive patterns caused by worn tires\u003c\/li\u003e\n  \u003cli\u003ePreserves pool finishes—safe on plaster, vinyl, concrete, and PebbleTec\u003c\/li\u003e\n  \u003cli\u003eExtends overall cleaner lifespan by reducing strain on drive parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to replace the tires on my Polaris cleaner?\u003c\/h3\u003e\n\u003cp\u003eReplacement is straightforward and requires no special tools: the tires slip over existing wheels and can be completed in minutes. The package includes six tires so you can refresh all wheel locations in a single maintenance session.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo disassembly or adhesive required—slide-on fit\u003c\/li\u003e\n  \u003cli\u003eTakes under 10 minutes for most models to replace all tires\u003c\/li\u003e\n  \u003cli\u003eClear, simple process suitable for DIY pool owners\u003c\/li\u003e\n  \u003cli\u003eSave on service costs by doing quick maintenance yourself\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from Funmit C10 tires?\u003c\/h3\u003e\n\u003cp\u003eThese tires are molded from premium, heavy-duty rubber formulated to resist wear from repeated pool use and chlorine exposure. They are built to OEM tolerances to ensure consistent sizing and predictable performance season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grade rubber construction for long-lasting wear\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet OEM fit and performance standards\u003c\/li\u003e\n  \u003cli\u003eSuitable for all common pool surfaces without causing damage\u003c\/li\u003e\n  \u003cli\u003ePack of six improves tire life and replaces an entire set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners with Polaris pressure-side cleaners who want a cost-effective, fast DIY repair to restore proper movement and cleaning coverage. If your Vac-Sweep or Black Max model shows tire wear, uneven tracking, or frequent stalling, this Funmit 6-pack brings the parts you need to get your cleaner back to reliable operation without replacing the whole unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tires compatible with Polaris Black Max models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for many Black Max units that use the C10 part; confirm your cleaner uses C10 rather than the larger C11.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the Funmit C10 tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; the slip-on tires can be installed by hand in minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54200333598904,"sku":"B0B4R4RSHC","price":81.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-c10-front-packaging_f8a7fb6a-2baf-4658-834d-7dd09c047eb5.jpg?v=1790611155"},{"product_id":"funmit-pool-spa-heater-safety-sensor-combo-3-piece-kit-stack-flue-sensor-high-limit-switch-thermistor-for-pentair-compatib","title":"Funmit pool \u0026 spa heater safety sensor combo — 3-piece kit (stack flue sensor, high-limit switch, thermistor) for Pentair-compatib","description":"\u003cp\u003e\u003cstrong\u003eFunmit 3-piece heater safety set: a stack flue sensor (42002-0024S), a high-limit switch (42001-0063S) and a heater thermistor (42001-0053S) designed to replace worn parts in Pentair Sta-Rite, MasterTemp and Max-E-Therm pool \u0026amp; spa heaters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement combo groups the three most common temperature- and safety-sensing parts you’ll need when troubleshooting heater shut-downs, temperature misreads or over-temperature protection trips. Each component is corrosion-resistant, engineered to match OEM electrical interfaces, and supplied together so you can restore reliable operation without multiple orders or expensive service calls. The set is intended for technicians and competent DIYers who can safely power-down equipment and follow step-by-step replacement guidance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly does each part do inside my pool or spa heater?\u003c\/h3\u003e\n\u003cp\u003eThe stack flue sensor monitors exhaust temperatures so combustion gases don’t overheat the venting system; the high-limit switch interrupts power when water gets too hot; the thermistor reports water temperature to the control board. Together they help the heater run safely and accurately without false trips or missed over-temperature events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e42002-0024S stack flue sensor: limits flue gas temperature to safe range.\u003c\/li\u003e\n  \u003cli\u003e42001-0063S high-limit switch: electrically opens when water exceeds safe temperature.\u003c\/li\u003e\n  \u003cli\u003e42001-0053S thermistor: provides temperature readings from -20°C to 80°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what precautions should I take?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone familiar with heater wiring and mechanical access panels. Always disconnect all power at the breaker and allow the heater to cool before touching sensors; wear gloves to prevent cuts from sheet metal. If unsure, reference a manufacturer service manual or watch a reputable video walkthrough for your heater model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off power at the breaker and confirm zero voltage.\u003c\/li\u003e\n  \u003cli\u003eRemove the access panel and locate the existing sensor and switch points.\u003c\/li\u003e\n  \u003cli\u003eSwap connectors and mounting hardware; use the same torque and routing as OEM parts.\u003c\/li\u003e\n  \u003cli\u003eTest operation after reassembly and restore power only when safe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these parts compatible with my heater brand and models?\u003c\/h3\u003e\n\u003cp\u003eThis Funmit combo is manufactured to fit a range of Pentair-compatible systems, including Sta-Rite, MasterTemp and Max-E-Therm heater families. Compatibility depends on the specific model year and factory wiring harness; compare terminal shapes and sensor dimensions before installation. When in doubt, check your heater’s parts diagram or contact Funmit customer support for confirmation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Pentair Sta-Rite, MasterTemp, Max-E-Therm electrical systems.\u003c\/li\u003e\n  \u003cli\u003eMatch physical mounting points and connector types before installation.\u003c\/li\u003e\n  \u003cli\u003eIncludes one of each part: 42001-0063S, 42001-0053S, 42002-0024S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these replacements and what performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eFunmit builds these replacements from stainless and rust-resistant materials to stand up to heater environments. The stack flue sensor is rated to prevent flue temperatures above 500°F; the thermistor covers -20°C to 80°C operation, providing reliable readings for most pool and spa use. Regular inspection and proper installation will extend service life and reduce unexpected trips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless construction resists corrosion in heater enclosures.\u003c\/li\u003e\n  \u003cli\u003eStack flue limits flue gas to safe temperatures (up to 500°F threshold).\u003c\/li\u003e\n  \u003cli\u003eThermistor temperature range: -20°C to 80°C for accurate monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Funmit combo set is for pool and spa owners, maintenance technicians, and DIY repairers who need a cost-effective, OEM-compatible replacement kit for common heater sensors and safety switches. It’s ideal when you want to diagnose and resolve temperature-control faults yourself, replace worn or corroded sensors in older heaters, or keep a spare set on hand for seasonal maintenance. If you prefer professional installation, provide your technician with this set to speed repairs and reduce service labor time.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this set fit my Pentair MasterTemp heater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In many cases yes; these parts are made for Pentair-compatible MasterTemp systems. Verify terminal shapes and mounting before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these parts myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you know heater wiring and safety procedures, yes—power off and follow a step-by-step guide. Otherwise hire a technician.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54200473682104,"sku":"B09SHH5FHJ","price":79.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-packaging-combo-set.jpg?v=1790614370"},{"product_id":"funmit-zodiac-baracuda-g3-pool-cleaner-replacement-kit-finned-seal-diaphragms-foot-pad","title":"Funmit Zodiac Baracuda G3 Pool Cleaner Replacement Kit — finned seal, diaphragms \u0026 foot pad","description":"\u003cp\u003e\u003cstrong\u003eA compact replacement kit from Funmit that restores your Zodiac Baracuda G3-family pool cleaner by supplying a finned seal, diaphragms, retaining rings and a foot pad to revive suction performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your suction-side cleaner running without buying a new unit. This Funmit kit brings together the most frequently worn components—one W70329 finned seal, two W69698 diaphragms, two W81600 retaining rings and one W70327 foot pad—so you can replace parts that commonly fail on Zodiac Baracuda G2\/G3\/G4, Alpha and Pacer models. Each piece is designed as a direct-fit aftermarket alternative; check your model numbers and measurements before installing.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these parts affect my cleaner's performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing seal and diaphragm components typically restores proper pulse, traction and suction on older cleaners. New flex parts stop air leaks and improve the cleaner’s ability to climb walls and navigate the pool floor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eW70329 finned seal reduces air entry at the cleaner inlet, improving vacuum consistency.\u003c\/li\u003e\n  \u003cli\u003eW69698 diaphragms renew the pulsation mechanism for stronger movement.\u003c\/li\u003e\n  \u003cli\u003eW81600 retaining rings secure diaphragms for leak-free operation.\u003c\/li\u003e\n  \u003cli\u003eW70327 foot pad re-establishes contact with the pool surface for efficient travel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models will these replacements fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit covers a wide set of Zodiac-style suction cleaners, including several Baracuda generations and Alpha models. It’s intended as a match for specific part numbers used by those cleaners, but always compare parts visually and measure to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Zodiac Baracuda G2, G3 and G4 families.\u003c\/li\u003e\n  \u003cli\u003eWorks with Alpha 2, Alpha 3, Alpha 3 Plus and Pacer\/Ranger 1500 where listed parts apply.\u003c\/li\u003e\n  \u003cli\u003eCross-references include W70464, W46666, W83277, W47521 and W49655 among others.\u003c\/li\u003e\n  \u003cli\u003eNot universal—verify by matching your unit’s part numbers or sending images for confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the most commonly replaced elements so you can perform quick repairs without sourcing multiple suppliers. Installation is typically a basic DIY task requiring common hand tools and a plain sequence: remove the old parts, clean mating surfaces, and fit the new pieces in the original orientation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 1x W70329 finned seal, 2x W69698 diaphragms, 2x W81600 retaining rings, 1x W70327 foot pad.\u003c\/li\u003e\n  \u003cli\u003eNo special adhesives—parts snap or seat into place following manufacturer steps.\u003c\/li\u003e\n  \u003cli\u003eExpect to spend 15–45 minutes depending on model and experience.\u003c\/li\u003e\n  \u003cli\u003eKeep a towel and gloves handy; inspect seals for correct seating before testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these aftermarket parts durable and cost-effective?\u003c\/h3\u003e\n\u003cp\u003eFunmit supplies these components as budget-friendly aftermarket alternatives that aim to balance cost and service life. They are manufactured to match common dimensions and withstand regular pool conditions, though longevity depends on pool chemistry and usage patterns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to replace worn OEM parts at a lower price point.\u003c\/li\u003e\n  \u003cli\u003eMaterials selected for flexibility and resistance to pool chemicals.\u003c\/li\u003e\n  \u003cli\u003eSold as a single kit to reduce downtime and simplify ordering.\u003c\/li\u003e\n  \u003cli\u003eIf a part does not match, Funmit requests customers contact support for resolution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and maintenance technicians who want a single, affordable repair kit to get older Zodiac-style suction cleaners back to work. If your Baracuda or Alpha cleaner is losing suction, pulsing irregularly, or not moving correctly, this kit supplies the common replacement parts to troubleshoot and restore function without full-unit replacement. Always compare part numbers and dimensions before purchase to ensure compatibility with your specific cleaner model.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Baracuda G3 cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is made for many Baracuda G2\/G3\/G4 and Alpha models; compare your unit’s part numbers or measurements to the listed cross-references to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation typically take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users complete the swap in 15–45 minutes with basic tools; cleaning mating surfaces first helps ensure a proper seal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54202489012408,"sku":"B089K5MD9F","price":92.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-packaging-w70329-kit.jpg?v=1790618233"},{"product_id":"funmit-pool-cleaner-front-tires-blue-hump-replacement-for-hayward-896584000-143-4-pack-heavy-duty-rubber","title":"Funmit Pool Cleaner Front Tires - Blue Hump Replacement for Hayward 896584000-143, 4-Pack, Heavy-Duty Rubber","description":"\u003cp\u003e\u003cstrong\u003eThese Funmit blue hump front tires are direct-fit replacement wheels for Hayward 896584000-143 pool cleaners, sold as a 4-piece set engineered to restore smooth navigation and prevent the cleaner from snagging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pressure or suction pool cleaner is sticking, skipping sections, or hanging on steep drains, worn front tires are often the cause. Funmit designed this affordable replacement specifically for Hayward 896584000-143 applications and compatible 2X\/4X models to bring back consistent movement and traction across vinyl, concrete, and fiberglass pool surfaces. Each set contains four identical tires made from heavy-duty rubber and sized for an easy swap without tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these tires improve my pool cleaner's movement?\u003c\/h3\u003e\n\u003cp\u003eReplacing old, flattened, or torn front tires restores the cleaner's intended wheel profile and grip, reducing stalls and uneven tracking. The hump shape helps the unit ride over small obstructions and maintain contact with the pool surface for steady suction and coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores wheel diameter and profile for correct clearance and balance\u003c\/li\u003e\n  \u003cli\u003eHump tread reduces snagging on drains and steps\u003c\/li\u003e\n  \u003cli\u003eDurable rubber keeps traction consistent across common pool finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact specs and how do I know they will fit?\u003c\/h3\u003e\n\u003cp\u003eFunmit provides clear measurements so you can confirm compatibility before purchase. Each tire measures 7.7 inches outer diameter, 6.2 inches inner diameter, and 0.9 inches thick—dimensions matching Hayward 896584000-143 front-wheel requirements and compatible with many 2X and 4X cleaner models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter: 7.7 inches for proper clearance\u003c\/li\u003e\n  \u003cli\u003eInner diameter: 6.2 inches to fit standard wheel hubs\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.9 inches for a balanced profile and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThese tires are user-friendly: remove the old tires from the wheel hubs and slip on the new ones—no special tools required. Cleaning is just as straightforward; rinse with fresh water to remove debris, and inspect periodically for cuts or wear to keep performance optimal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free swap—change all four tires in under five minutes\u003c\/li\u003e\n  \u003cli\u003eQuick rinse-and-inspect maintenance extends service life\u003c\/li\u003e\n  \u003cli\u003eReplacement avoids costly full-wheel assemblies when only tires are worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose Funmit replacement tires instead of OEM parts?\u003c\/h3\u003e\n\u003cp\u003eFunmit focuses on delivering cost-effective alternatives built from heavy-duty rubber and tested for stable performance, offering savings while maintaining functional parity. The brand supports shoppers with customer service and a simplified returns approach if parts arrive damaged or don't fit as expected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality rubber compound tested for flexibility and durability\u003c\/li\u003e\n  \u003cli\u003eLower cost compared with many OEM tires without sacrificing function\u003c\/li\u003e\n  \u003cli\u003eDedicated customer service to assist with fitment or quality questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Pool owners and maintenance professionals who use Hayward 896584000-143, 2X, or 4X pressure or suction cleaners and need a quick, affordable solution to restore their cleaner's mobility. This set is ideal when the original front tires show flattening, cracking, or reduced diameter, and for anyone who prefers a fast, tool-free replacement to keep pool cleaning efficient and hassle-free.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my Hayward 896584000-143 cleaner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These tires match the specified 7.7\" outer and 6.2\" inner diameters for Hayward 896584000-143 front wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; each tire can be swapped by hand in minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":54204344008888,"sku":"B089K871KZ","price":85.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/funmit-front-tire-packaging-front.jpg?v=1790629214"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/funmit-front-tire-packaging-front.jpg?v=1790680015","url":"https:\/\/canadianlawn.ca\/collections\/funmit.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}