{"title":"FROG","description":"\u003cp\u003eBrowse 20 FROG products at Canadian Lawn, including pool \u0026amp; spa water balance, pool test kits \u0026amp; strips and hot tub accessories. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"frog-silicone-tether-for-hot-tubs-swim-spas-neutral-gray-adjustable-6-loop-chemical-resistant","title":"FROG Silicone Tether for Hot Tubs \u0026 Swim Spas — Neutral Gray, Adjustable 6‑Loop Chemical‑Resistant","description":"\u003cstrong\u003eFROG @Ease Silicone Tether secures the SmartChlor cartridge in place inside hot tubs and swim spas to keep sanitation consistent and prevent loss.\u003c\/strong\u003e\n\n\u003cp\u003eThe FROG @Ease Silicone Tether is a simple, durable accessory designed to hold your FROG @ease SmartChlor Cartridge where you want it in a swim spa or hot tub. Made from flexible silicone, the tether threads through the cartridge and fastens to a rail, so the cartridge won't drift into filters, jets, or seating areas. It’s neutral gray to blend with the cartridge and built to resist pool and spa chemicals for extended service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install the tether quickly?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires no tools or special skills: thread one end of the tether through the hole in the SmartChlor Cartridge, loop the tether back through itself, and fasten the other end to a spa rail at a safe distance from the filter. The design gives you immediate control over cartridge placement and prevents contact with equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread tether through cartridge hole and pull tight through loop.\u003c\/li\u003e\n  \u003cli\u003eAttach the free end around a spa rail away from filters and jets.\u003c\/li\u003e\n  \u003cli\u003eUse the six built-in loops to adjust length to your preferred position.\u003c\/li\u003e\n  \u003cli\u003eNo assembly or clips required—ready to use out of the package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the tether fit different spa setups?\u003c\/h3\u003e\n\u003cp\u003eThe FROG @Ease tether is intentionally flexible and adjustable: six looping positions let you lengthen or shorten the tether to accommodate various rail diameters and cartridge placements. Its pliable silicone conforms to curved rails and stays secure during normal use, giving you a reliable mounting option for most hot tubs and swim spas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix loops for incremental length adjustments.\u003c\/li\u003e\n  \u003cli\u003eSilicone material conforms to round and oval rails.\u003c\/li\u003e\n  \u003cli\u003eNeutral gray matches the FROG @ease cartridge color for discreet placement.\u003c\/li\u003e\n  \u003cli\u003eDesigned to avoid contact with filters and spa equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the tether last in spa conditions?\u003c\/h3\u003e\n\u003cp\u003eConstructed from resilient silicone, this tether resists degradation from water, heat, and typical pool and spa chemicals. Its durability means you can expect multiple seasons of dependable use, making the tether an economical addition to your spa maintenance routine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChemical-resistant silicone for prolonged lifespan.\u003c\/li\u003e\n  \u003cli\u003eFlexible yet resilient—retains shape over time.\u003c\/li\u003e\n  \u003cli\u003eNeutral color resists visible fading and stains.\u003c\/li\u003e\n  \u003cli\u003eReusable across multiple cartridges and seasons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of using this tether?\u003c\/h3\u003e\n\u003cp\u003eUsing the FROG @Ease tether keeps the SmartChlor Cartridge where it needs to be for consistent sanitizer delivery, reduces the chance of cartridge loss or clogging, and simplifies routine water care. It’s a low-cost upgrade that improves convenience and protects both cartridge and spa equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintains correct cartridge position for steady water sanitation.\u003c\/li\u003e\n  \u003cli\u003ePrevents cartridge from blocking filters or getting trapped in jets.\u003c\/li\u003e\n  \u003cli\u003eEasy to reposition—ideal when you swap or check cartridges.\u003c\/li\u003e\n  \u003cli\u003eAffordable, long-lasting accessory that complements the FROG @ease system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The FROG @Ease Silicone Tether is ideal for hot tub and swim spa owners who use the FROG @ease SmartChlor Cartridge and want a simple way to control cartridge placement. It suits DIY spa caretakers, rental property managers, and anyone seeking a durable, low-maintenance solution to prevent cartridge drift and protect spa equipment. If you prefer fuss-free water care and a tidy, reliable cartridge setup, this tether is a practical, cost-effective accessory to keep on hand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the tether with any FROG @ease cartridge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tether is made to fit FROG @ease SmartChlor cartridges and secures them to most spa rails.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the tether require tools or clips to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools or clips are needed—simply thread the tether through the cartridge and loop it onto a spa rail.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54193331863736,"sku":"B0CQMXN8TJ","price":46.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-ease-tether-front-view.jpg?v=1790561426"},{"product_id":"frog-total-alkalinity-increaser-for-hot-tubs-swim-spas-1-pack-fast-dissolving-with-trudose-cap","title":"FROG Total Alkalinity Increaser for Hot Tubs \u0026 Swim Spas, 1-Pack — Fast‑Dissolving with TruDose Cap","description":"\u003cp\u003e\u003cstrong\u003eFROG TArget is a fast‑dissolving total alkalinity increaser designed to raise and stabilize alkalinity in hot tubs and swim spas for easier pH control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping total alkalinity within the recommended range makes pH management simpler and helps protect your hot tub or swim spa equipment and surfaces. FROG TArget delivers a measured, fast‑dissolving formula and a TruDose measuring cap so you can add the right amount without complicated calculations. It works with chlorine, bromine, or salt systems and includes clear dosing guidance for various sizes.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will FROG TArget change my alkalinity?\u003c\/h3\u003e\n\n\u003cp\u003eThe product is formulated to dissolve rapidly so alkalinity adjustments take effect sooner than slow‑dissolving powders. You’ll often see improved test strip readings after circulation has run for a short period. Always retest after circulation and adjust further if needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFast‑dissolving powder for quicker dispersion\u003c\/li\u003e\n  \u003cli\u003eUse with pool or hot tub circulation for best results\u003c\/li\u003e\n  \u003cli\u003eRecheck alkalinity with FROG or standard test strips after treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I measure and add the correct dose safely?\u003c\/h3\u003e\n\n\u003cp\u003eFROG TArget includes the TruDose cap with cup and tablespoon markings so you can measure accurately without estimating. The cap seals to prevent spills and doubles as a translucent measuring cup for clear visibility of the dose. Follow the product’s dosage table for your hot tub or swim spa volume.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTruDose cap shows both cups and tablespoons for exact dosing\u003c\/li\u003e\n  \u003cli\u003eTranslucent measuring cup prevents over‑ or under‑addition\u003c\/li\u003e\n  \u003cli\u003eSealable cap reduces risk of spills and contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill FROG TArget work with my sanitizer system?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this alkalinity increaser is formulated to be compatible with chlorine, bromine, and salt sanitizing systems used in hot tubs and swim spas. It’s intended to help stabilize pH so your sanitizer performs more consistently, regardless of chemistry. Follow the label directions to maintain proper balances for safety and equipment longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with chlorine, bromine, and salt systems\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize pH for more effective sanitizer action\u003c\/li\u003e\n  \u003cli\u003eDosage guidance provided for hot tubs and swim spas of varying sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know when to use it and how often?\u003c\/h3\u003e\n\n\u003cp\u003eTest your total alkalinity regularly using FROG test strips or any standard pool\/hot tub test strip; add product when readings fall below the recommended range. Frequency depends on bather load, water chemistry, and fresh water additions. After adding, run the circulation system and retest to confirm the level is within range.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTest routinely and treat when alkalinity is low\u003c\/li\u003e\n  \u003cli\u003eAdjust frequency based on use and water turnover\u003c\/li\u003e\n  \u003cli\u003eRetest after treatment to confirm balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: FROG TArget is suited for hot tub and swim spa owners who prefer a simple, measured approach to water balance. It’s useful for first‑time owners who want clear dosing guidance, busy households needing fast results, and experienced users maintaining any sanitizer system. If you want straightforward alkalinity adjustments with minimal guesswork, this 1‑pack solution streamlines the process while helping protect equipment and improve water stability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can FROG TArget be used with saltwater hot tubs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. FROG TArget is compatible with salt, chlorine, and bromine systems; follow dosing directions and retest after circulation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I retest alkalinity after adding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Run circulation and retest after 1–2 hours; allow full dispersion for the most accurate reading.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54194092835000,"sku":"B0FLRSFR6K","price":60.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-target-front-label.jpg?v=1790569143"},{"product_id":"frog-pool-hot-tub-test-strips-50-count-low-range-chlorine-bromine-ph-accuracy","title":"FROG Pool \u0026 Hot Tub Test Strips — 50 Count, Low-Range Chlorine\/Bromine \u0026 pH Accuracy","description":"\u003cp\u003e\u003cstrong\u003eFROG Test Strips for Pools \u0026amp; Hot Tubs (50 count) are quick dip-and-read strips designed to measure free chlorine or bromine, pH, total alkalinity and hardness for pools and hot tubs using FROG Fresh Mineral Water.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your pool and hot tub water balanced and easy to maintain with test strips made specifically for FROG Sanitizing Systems. These strips read the lower free chlorine or bromine ranges produced by FROG Fresh Mineral Water, giving you accurate, actionable results in seconds. Each bottle contains 50 single-use strips and includes a built-in color reference on the bottle for instant comparison — no separate chart needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these strips differ from standard pool test strips?\u003c\/h3\u003e\n\u003cp\u003eFROG Test Strips are formulated to detect the lower sanitizer levels typical of mineral-based FROG systems, so they avoid misleading high-range readings from generic strips. That means you can maintain the proper reduced chlorine or bromine levels that FROG systems use for gentler water care.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecifically calibrated for FROG Fresh Mineral Water sanitizer ranges\u003c\/li\u003e\n  \u003cli\u003eAvoids false-high readings common with standard strips\u003c\/li\u003e\n  \u003cli\u003eDesigned for both pools and hot tubs using FROG cartridges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat results do the strips measure and how fast are they?\u003c\/h3\u003e\n\u003cp\u003eThe strips test free chlorine or bromine, total alkalinity, pH and hardness, providing a compact snapshot of water chemistry. Results appear within seconds after a two-second dip, then compare the strip to the color guide printed on the bottle cap for an immediate reading.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFree chlorine or bromine: precise low-range detection\u003c\/li\u003e\n  \u003cli\u003epH: checks acidity\/alkalinity balance\u003c\/li\u003e\n  \u003cli\u003eTotal alkalinity: helps prevent pH swings\u003c\/li\u003e\n  \u003cli\u003eHardness: guards against scale or corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use FROG Test Strips correctly for the most reliable readings?\u003c\/h3\u003e\n\u003cp\u003eDip a single strip into water for two seconds, remove and hold it level while colors develop, then match to the bottle’s color chart immediately. Test at least weekly or when you notice changes in clarity, after heavy use, or following chemical adjustments to keep water safe and comfortable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDip for two seconds, remove, and compare to the bottle chart\u003c\/li\u003e\n  \u003cli\u003eTest weekly and after heavy bather use or chemical changes\u003c\/li\u003e\n  \u003cli\u003eStore strips in a cool, dry place and seal bottle tightly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy trust FROG Test Strips over time?\u003c\/h3\u003e\n\u003cp\u003eFROG has over 25 years of experience developing water care products, including patented Mineral Technology and turnkey cartridges. These strips are part of an integrated approach, made to work with FROG systems so you can maintain lower sanitizer levels while preserving water clarity and comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBacked by FROG’s decades of water care experience\u003c\/li\u003e\n  \u003cli\u003eEngineered for compatibility with FROG sanitizers and cartridges\u003c\/li\u003e\n  \u003cli\u003e50 strips per bottle for routine monitoring and seasonal care\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool and hot tub owners using FROG Fresh Mineral Water or FROG Sanitizing Systems who want fast, reliable test results. These strips are ideal for people who prefer lower sanitizer concentrations, want clearer guidance than generic strips provide, and need a simple weekly testing routine to protect equipment and keep water comfortable for family and guests.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these strips with any sanitizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use them with pools and hot tubs running FROG Fresh Mineral Water or FROG systems; they’re calibrated for FROG’s lower sanitizer levels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I test my pool or hot tub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Test at least once a week, after heavy use, or after any chemical adjustments for consistent water balance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54194093129912,"sku":"B00BOUJFWE","price":48.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-test-strips-front-packaging.jpg?v=1790569162"},{"product_id":"frog-ph-increaser-for-hot-tubs-swim-spas-1-pack-fast-dissolving-powder-with-trudose-cap-compatible-with-chlorine-bromine-salt","title":"FROG pH Increaser for Hot Tubs \u0026 Swim Spas - 1 Pack Fast-Dissolving Powder with TruDose Cap, Compatible with Chlorine\/Bromine\/Salt","description":"\u003cp\u003e\u003cstrong\u003eFROG JumpH is a fast-dissolving pH increaser designed to raise and stabilize pH in hot tubs and swim spas for clearer, more comfortable water.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaintaining the right pH helps sanitizers work efficiently and prevents corrosion, cloudy water, and skin or eye discomfort. FROG JumpH comes in a single, easy-to-use bottle with a TruDose measuring cap so you can dose accurately without complex calculations. Compatible with chlorine, bromine, or salt systems, it suits any hot tub or swim spa setup and pairs well with FROG mineral systems and test strips for routine water care.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will JumpH raise my hot tub's pH?\u003c\/h3\u003e\n\u003cp\u003eJumpH is formulated to dissolve rapidly, so pH changes occur soon after application. For most tubs, you’ll see a measurable change within 15–30 minutes; always retest before allowing bathers to enter. Follow the dosage guide for your tub size and current pH to avoid overshooting the target range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-dissolving powder for quick pH adjustment\u003c\/li\u003e\n  \u003cli\u003eTypical recheck window: 15–30 minutes after dosing\u003c\/li\u003e\n  \u003cli\u003eClear dosing chart for different tub volumes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use JumpH with my existing sanitizer and FROG mineral cartridges?\u003c\/h3\u003e\n\u003cp\u003eYes — JumpH works with chlorine, bromine, or salt-based sanitizers and is compatible with FROG mineral technology. Adjust pH as needed while keeping your regular sanitizer and mineral cartridge schedule. Balanced pH preserves sanitizer strength and helps minerals perform consistently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with all common sanitizers\u003c\/li\u003e\n  \u003cli\u003eSafe to use alongside FROG mineral cartridges\u003c\/li\u003e\n  \u003cli\u003eHelps maintain sanitizer efficiency and water clarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I measure and dose without guessing?\u003c\/h3\u003e\n\u003cp\u003eEvery bottle includes a FROG TruDose cap that seals the container and doubles as a translucent measuring cup with clear tablespoon and cup markings. Use a FROG test strip or any standard test strip to determine current pH, then dose according to the bottle’s instructions. The measuring cap simplifies repetitive upkeep and reduces spills.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTruDose cap with cup and tablespoon indicators\u003c\/li\u003e\n  \u003cli\u003eTranslucent cap for accurate visual dosing\u003c\/li\u003e\n  \u003cli\u003eSimple instructions eliminate math and guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill JumpH protect equipment and skin while adjusting pH?\u003c\/h3\u003e\n\u003cp\u003eBalancing pH between 7.2 and 7.8 helps reduce corrosion of metal components and lessens skin and eye irritation for bathers. JumpH raises pH gently when used as directed; avoid large, one-time overdoses that can overshoot the ideal range. Routine testing and small adjustments are the safest approach.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTargets comfortable pH range to minimize irritation\u003c\/li\u003e\n  \u003cli\u003eHelps prevent corrosion and scale buildup when balanced\u003c\/li\u003e\n  \u003cli\u003eDesigned for measured, incremental dosing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG JumpH is made for hot tub and swim spa owners who want a straightforward, accurate way to raise pH without complicated calculations. It’s ideal for people using chlorine, bromine, or salt systems and for those using FROG mineral cartridges who want consistent water performance. If you prefer clear dosing tools, fast-dissolving formulas, and a trusted brand with decades of water-care experience, JumpH fits into regular maintenance routines to keep your water comfortable and clear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long after adding JumpH should I retest pH?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wait 15–30 minutes after dosing, then retest with a standard or FROG test strip before bathing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is JumpH safe with chlorine or bromine systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. JumpH is compatible with chlorine, bromine, and salt systems when used according to directions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54194213945528,"sku":"B0FLRKLMXD","price":58.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-jumph-front-label.jpg?v=1790571326"},{"product_id":"frog-ease-hot-tub-swim-spa-test-strips-30-count-smartchlor-ph-alkalinity-hardness","title":"FROG @ease Hot Tub \u0026 Swim Spa Test Strips, 30-Count — SmartChlor + pH, Alkalinity \u0026 Hardness","description":"\u003cp\u003e\u003cstrong\u003eFROG @ease Test Strips are a 30-count pack of quick, single-dip test strips engineered to check SmartChlor, pH, Total Alkalinity, and Total Hardness in hot tubs and swim spas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese test strips are made specifically for the FROG @ease sanitizing system and speed up weekly water checks by giving clear color results in seconds. Instead of multi-step liquid tests, the SmartChlor-aware strips show when the FROG cartridge needs replacing and whether the water chemistry sits within recommended ranges. They’re packaged in a compact bottle for home spa use and designed to be simple for owners who want reliable, fast readings without guesswork.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these strips tell me when my FROG SmartChlor cartridge needs replacing?\u003c\/h3\u003e\n\n\u003cp\u003eThe strip’s SmartChlor indicator changes color to match the chart on the bottle, making cartridge status immediately visible. If the SmartChlor spot no longer aligns with the active color on the chart, the cartridge is due for replacement. This removes the need for separate tests or estimating cartridge life based on usage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSingle SmartChlor color block for direct cartridge status\u003c\/li\u003e\n  \u003cli\u003eMatch strip color to the bottle chart in natural light for accuracy\u003c\/li\u003e\n  \u003cli\u003eInstant result — dip, remove, and compare in seconds\u003c\/li\u003e\n  \u003cli\u003eReduces unnecessary cartridge swaps and over-treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat water parameters do the FROG @ease strips measure and why does that matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe strips measure pH, Total Alkalinity (TA), and Total Hardness alongside the SmartChlor indicator, giving a snapshot of the key balancing factors for hot tubs and swim spas. Keeping these values in range helps protect equipment, improve sanitizer performance, and maintain comfortable water. Regular checks make troubleshooting easier when you see cloudiness or foam developing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003epH: helps maintain user comfort and sanitizer effectiveness\u003c\/li\u003e\n  \u003cli\u003eTotal Alkalinity: stabilizes pH to prevent rapid swings\u003c\/li\u003e\n  \u003cli\u003eTotal Hardness: protects heaters and surfaces from scale\u003c\/li\u003e\n  \u003cli\u003eSmartChlor: monitors cartridge sanitizing capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the testing process and how often should I test?\u003c\/h3\u003e\n\n\u003cp\u003eTesting with FROG @ease strips takes only seconds: dip for a brief moment, remove, and compare the pads to the printed color chart on the bottle. FROG recommends testing at least once per week to keep chemistry balanced; test more often after heavy use or heat spikes. The bottle of 30 strips supplies roughly a month of weekly checks for one spa.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDip-strip-remove: single-step sample collection\u003c\/li\u003e\n  \u003cli\u003eCompare immediately to the bottle’s color chart\u003c\/li\u003e\n  \u003cli\u003eUse weekly under normal conditions, more if used heavily\u003c\/li\u003e\n  \u003cli\u003e30 strips per bottle — about one month of weekly testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these strips work with other sanitizing systems?\u003c\/h3\u003e\n\n\u003cp\u003eThese test strips are formulated for use with FROG @ease systems and include a SmartChlor indicator specific to FROG cartridges, so they are not ideal for non-FROG sanitizers. For accurate SmartChlor readings and cartridge alerts, use them only with FROG @ease hot tub and swim spa systems. If you use a different sanitizer, choose test strips matched to that system for reliable results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for FROG @ease SmartChlor chemistry\u003c\/li\u003e\n  \u003cli\u003eNot recommended for non-FROG sanitizer systems\u003c\/li\u003e\n  \u003cli\u003eEnsures correct cartridge replacement timing when used properly\u003c\/li\u003e\n  \u003cli\u003eUse dedicated tests for alternative sanitizers to avoid false readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These 30-count FROG @ease Test Strips are for hot tub and swim spa owners using the FROG @ease sanitizing system who want a fast, low-effort way to monitor SmartChlor, pH, Total Alkalinity, and Total Hardness. They suit busy homeowners, rental hosts, and anyone who prefers a straightforward color-match test instead of multi-step liquid kits. If you want quick weekly confidence that your FROG cartridge is working and your water chemistry is balanced, these strips make routine checks simple and reliable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I use FROG @ease test strips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dip the strip briefly into spa water, remove, then match the pad colors to the bottle’s chart. Read results immediately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I test spa water with these strips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Test at least once a week and after heavy use, temperature changes, or adding chemicals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54194321457336,"sku":"B077KK7V2R","price":44.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-atease-front-bottle.jpg?v=1790573617"},{"product_id":"frog-droph-ph-ta-decreaser-for-hot-tubs-swim-spas-1-pack-fast-dissolving-with-trudose-cap","title":"FROG DropH pH \u0026 TA Decreaser for Hot Tubs \u0026 Swim Spas, 1 Pack — Fast‑Dissolving with TruDose Cap","description":"\u003cp\u003e\u003cstrong\u003eFROG DropH is a fast-dissolving pH and total alkalinity reducer designed to bring hot tub and swim spa water into the ideal 7.2–7.8 range quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your hot tub or swim spa water reads high pH or alkalinity, it can dull sanitizer performance and make water feel harsh. FROG DropH provides a convenient, measured way to lower both pH and total alkalinity so water looks clearer, feels softer, and sanitation systems work better. The product comes with FROG’s TruDose measuring cap to simplify dosing and avoid spills, and it’s compatible with all sanitizer systems including chlorine, bromine, and salt-based setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will DropH change my hot tub or swim spa pH?\u003c\/h3\u003e\n\u003cp\u003eDropH is formulated to dissolve rapidly so it begins lowering pH and alkalinity soon after application. Response time depends on water volume and circulation, but you can expect noticeable adjustments within hours when the pump is running.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-dissolving formula for prompt action\u003c\/li\u003e\n  \u003cli\u003eWorks while the pump circulates water for even distribution\u003c\/li\u003e\n  \u003cli\u003eDosage guidance included for a range of hot tub and swim spa sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I dose DropH accurately without guessing?\u003c\/h3\u003e\n\u003cp\u003eEvery bottle includes the FROG TruDose measuring cap, which doubles as a spill-resistant lid and a translucent cup with clear tablespoon and cup markings. Follow the simple instructions and test with a standard test strip to confirm when levels reach the recommended window.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTranslucent cap with cup and tablespoon indicators\u003c\/li\u003e\n  \u003cli\u003ePreprinted dosage chart for hot tubs and swim spas\u003c\/li\u003e\n  \u003cli\u003eWorks with FROG or standard test strips for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill DropH work with my sanitizer type—chlorine, bromine or salt?\u003c\/h3\u003e\n\u003cp\u003eYes. DropH is compatible with all common sanitizing chemistries, so you can use it in chlorine, bromine or saltwater systems without altering your sanitizer routine. The instructions include adjustments for different water chemistries and spa sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for chlorine, bromine, and salt systems\u003c\/li\u003e\n  \u003cli\u003eDosage directions account for both hot tubs and swim spas\u003c\/li\u003e\n  \u003cli\u003eHelps optimize sanitizer effectiveness by correcting pH\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: FROG DropH is aimed at hot tub and swim spa owners who want a straightforward, reliable way to lower elevated pH and total alkalinity. It’s ideal for users who prefer precise dosing without math, those looking to maintain clearer water and better sanitizer performance, and anyone using chlorine, bromine, or salt systems who needs a fast-acting, easy-to-measure pH reducer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How soon can I retest pH after adding DropH?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Run the pump for at least 15–30 minutes and retest; full adjustment is often visible within a few hours.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is DropH safe with saltwater hot tubs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. DropH is compatible with salt systems as well as chlorine and bromine sanitizers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54195973423288,"sku":"B0FLRFS7GV","price":62.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-droph-front-packaging.jpg?v=1790586215"},{"product_id":"frog-total-hardness-increaser-for-hot-tubs-swim-spas-1-pack-fast-dissolving-trudose-cap","title":"FROG Total Hardness Increaser for Hot Tubs \u0026 Swim Spas, 1 Pack — Fast‑Dissolving, TruDose Cap","description":"\u003cp\u003e\u003cstrong\u003eFROG SooTHe is a fast-dissolving calcium hardness increaser formulated to raise and stabilize total hardness in hot tubs and swim spas, protecting surfaces and equipment from corrosion and staining.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeeping the right total hardness is a key part of balanced hot tub water. FROG SooTHe helps you bring low-hardness water into the recommended range quickly and predictably, using a user-friendly measuring cap and clear dosing guidance. It works alongside chlorine, bromine, or salt systems and is designed for both hot tubs and swim spas.\u003c\/p\u003e\u003ch3\u003eHow quickly will FROG SooTHe adjust my hot tub’s hardness?\u003c\/h3\u003e\u003cp\u003eFROG SooTHe is formulated to dissolve rapidly so you can see results soon after application. Because it dissolves quickly, it minimizes the time you need to wait before re-testing and making any follow-up adjustments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast-dissolving formula for quicker hardness increases\u003c\/li\u003e\n\u003cli\u003eClear dosage instructions tailored for hot tubs and swim spas\u003c\/li\u003e\n\u003cli\u003eCompatible with common sanitizer chemistries for straightforward use\u003c\/li\u003e\n\u003cli\u003eAllows re-testing within hours to confirm levels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill this product protect my hot tub surfaces and equipment?\u003c\/h3\u003e\u003cp\u003eRaising total hardness prevents aggressive, soft water that can etch metal, wear seals, or produce staining. By stabilizing calcium levels you reduce the risk of corrosion and maintain the integrity of plumbing, heaters, and shell finishes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHelps prevent corrosive effects from low-hardness water\u003c\/li\u003e\n\u003cli\u003eReduces staining risks tied to imbalanced water chemistry\u003c\/li\u003e\n\u003cli\u003eSupports longer-lasting pumps, heaters, and fittings\u003c\/li\u003e\n\u003cli\u003eSuitable for all hot tub and swim spa materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do I measure and add the right amount?\u003c\/h3\u003e\u003cp\u003eThe included FROG TruDose measuring cap simplifies dosing—no calculations needed. Read your water using a FROG or standard test strip, follow the product’s dosage chart, pour the measured amount into the tub, and retest after circulation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTranslucent cap with cup and tablespoon indicators for accuracy\u003c\/li\u003e\n\u003cli\u003eStep-by-step instructions printed with the bottle\u003c\/li\u003e\n\u003cli\u003eWorks with standard test strips to confirm results\u003c\/li\u003e\n\u003cli\u003eDosage guidance covers both hot tubs and swim spas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIs FROG SooTHe compatible with my sanitizing system?\u003c\/h3\u003e\u003cp\u003eYes—FROG SooTHe is designed to be used alongside chlorine, bromine, or salt-based sanitizers. It raises mineral content without interfering with your sanitizer’s normal operation when used as directed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with chlorine, bromine, and salt systems\u003c\/li\u003e\n\u003cli\u003eSafe for use in any size hot tub or swim spa\u003c\/li\u003e\n\u003cli\u003eLabel provides guidance to avoid over-dosing\u003c\/li\u003e\n\u003cli\u003eUse with routine testing to maintain ideal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWho this is for: FROG SooTHe is aimed at hot tub and swim spa owners who want a reliable, easy-to-dissolve product to raise and stabilize total hardness. It’s especially useful for users dealing with naturally soft fill water, those troubleshooting corrosion or staining, and anyone who prefers straightforward dosing with clear measuring indicators. Whether you maintain a backyard hot tub or a larger swim spa, this single-pack solution delivers a predictable way to protect surfaces and equipment while keeping water chemistry on track.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How soon can I retest hardness after adding FROG SooTHe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Retest after the water has circulated for a few hours; many users see stable readings within the same day.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use FROG SooTHe with a salt system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, FROG SooTHe is compatible with chlorine, bromine, and salt-based sanitizers when used per instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54199485268152,"sku":"B0FLRR97KV","price":60.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-soothe-front-label.jpg?v=1790595176"},{"product_id":"frog-goodbye-cloudy-pool-clarifier-pods-3-pack-90-day-prefilled-skimmer-dosing-for-pools-up-to-30-000-gal","title":"FROG Goodbye Cloudy Pool Clarifier Pods, 3-Pack (90-Day) — Prefilled Skimmer Dosing for Pools up to 30,000 gal","description":"\u003cstrong\u003eFROG 90-Day Goodbye Cloudy are three prefilled Drop ‘n Go clarifier pods that prevent cloudy pool water for up to 90 days with one pod per month.\u003c\/strong\u003e\n\nFROG’s Goodbye Cloudy pods simplify pool maintenance by combining concentrated clarifier chemistry into easy-to-use, premeasured pods designed for both in-ground and above-ground pools up to 30,000 gallons. Instead of measuring and pouring multiple chemicals each week, you drop a single pod into the skimmer and let the dry formula dispense over 24 hours, helping keep water clear and reducing time spent on routine dosing.\n\n\u003ch3\u003eHow does a Goodbye Cloudy pod stop visible cloudiness in my pool?\u003c\/h3\u003e\n\u003cp\u003eThe pod releases a concentrated clarifier into circulation that collects microscopic particles so they can be removed by the filter, helping restore and maintain clarity. It works continually when placed in the skimmer, dispersing over about 24 hours so filtration can capture the coagulated particles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrefilled, dry formula for predictable release and minimal mess\u003c\/li\u003e\n  \u003cli\u003eDesigned to coagulate tiny suspended particles for easier filtration\u003c\/li\u003e\n  \u003cli\u003eUse one pod per month for continuous, measured treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill one pod treat my entire pool and how long does it last?\u003c\/h3\u003e\n\u003cp\u003eEach Goodbye Cloudy pod is formulated to protect pools up to 30,000 gallons and is intended to last roughly 30 days; the three-pod pack provides around 90 days of coverage. For ongoing maintenance, replace the pod monthly and discard the used pod when you next empty the skimmer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks for both in-ground and above-ground pools up to 30,000 gallons\u003c\/li\u003e\n  \u003cli\u003eOne pod per month; three pods for about a 90-day season\u003c\/li\u003e\n  \u003cli\u003eSimple swap-out when skimmer is emptied—no measuring required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the Drop ‘n Go pod safely and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eUsing Goodbye Cloudy pods requires no special tools: drop a single pod into the skimmer basket, run the pump so water circulates, and wait about 24 hours for the formula to disperse. Follow standard pool safety and manufacturer guidance for skimmer access and disposal of used pods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop one prefilled pod into the skimmer basket; run pump for circulation\u003c\/li\u003e\n  \u003cli\u003eWait ~24 hours for dispensing; discard used pod when skimmer is emptied\u003c\/li\u003e\n  \u003cli\u003eNo measuring, mixing, or liquid handling reduces spills and guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes Goodbye Cloudy replace regular pool care steps like filtration and sanitizer?\u003c\/h3\u003e\n\u003cp\u003eGoodbye Cloudy complements—not replaces—good pool practices such as regular filtration, backwashing, and maintaining proper sanitizer and pH levels. It addresses suspended particles that cause hazy water while your filter and sanitizer continue to handle debris and microbial control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePairs with routine filtration and sanitizer maintenance for best results\u003c\/li\u003e\n  \u003cli\u003eHelps filters capture finer particles that cause cloudiness\u003c\/li\u003e\n  \u003cli\u003eNot a sanitizer—continue using appropriate sanitizer products as directed\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nFROG 90-Day Goodbye Cloudy is made for pool owners who want a low-effort way to reduce cloudy water without weekly measuring or handling liquids—ideal for families, seasonal homeowners, and anyone responsible for pools up to 30,000 gallons. If you prefer premeasured, drop-and-forget solutions that work alongside your existing filtration and sanitizer routine, these three Drop ‘n Go pods offer a straightforward month-by-month clarifier option.\n\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace a Goodbye Cloudy pod?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace one pod every month; the three-pod pack provides about 90 days of continuous treatment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Goodbye Cloudy with any pool size?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each pod treats pools up to 30,000 gallons; larger pools may need additional treatment or follow-up testing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54199687020728,"sku":"B0DQ61CDQY","price":73.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-packaging-front.jpg?v=1790597920"},{"product_id":"frog-pipe-jet-cleanser-for-hot-tubs-2-pack-single-dose-gel-deep-cleans-plumbing-jets","title":"FROG Pipe \u0026 Jet Cleanser for Hot Tubs, 2-Pack Single-Dose Gel – Deep Cleans Plumbing \u0026 Jets","description":"\u003cp\u003e\u003cstrong\u003eFROG Pipe \u0026amp; Jet Cleanser is a single-dose gel treatment that deep-cleans hot tub plumbing, jets and lines to remove oils, biofilm and buildup before a drain or seasonal shutdown.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your hot tub water looks dull, your filters clog quickly or you notice scum lines and reduced jet performance, hidden residue inside plumbing is often the cause. This product is a premixed, professional-grade gel designed to circulate through pipes and jets to dissolve and flush away unseen gunk so sanitizers work more effectively and water stays fresher after a refill.\u003c\/p\u003e\n\n\u003ch3\u003eHow does FROG Pipe \u0026amp; Jet Cleanser actually clean inside the pipes?\u003c\/h3\u003e\n\n\u003cp\u003eThe cleanser is a concentrated gel formulated to move through plumbing and jet ports, clinging to and breaking up oils, lotions and biofilm. During circulation, the solution loosens deposits that trap bacteria and organics so they can be flushed out with a drain-and-rinse.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSingle-dose premixed gel for simple use—no measuring or mess.\u003c\/li\u003e\n  \u003cli\u003eCirculates through jets and plumbing for contact with hidden surfaces.\u003c\/li\u003e\n  \u003cli\u003eBreaks down oils, lotions and biofilm that standard sanitizers miss.\u003c\/li\u003e\n  \u003cli\u003eNo scrubbing required; biodegradable ingredients rinse away.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I use this cleanse versus routine water care?\u003c\/h3\u003e\n\n\u003cp\u003eUse the cleanser before you drain and refill your spa, during seasonal shutdowns or whenever you notice persistent cloudiness, scum lines or stubborn odors. It complements regular sanitizer systems by removing the buildup that reduces sanitizer effectiveness.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBefore drain-and-refill to remove accumulated gunk.\u003c\/li\u003e\n  \u003cli\u003eAt season start or end for a thorough system purge.\u003c\/li\u003e\n  \u003cli\u003eWhen filters clog despite regular maintenance.\u003c\/li\u003e\n  \u003cli\u003eAfter heavy use, parties, or extended neglect to reset water quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the FROG cleaner safe for my hot tub surfaces and sanitizing system?\u003c\/h3\u003e\n\n\u003cp\u003eThe formula is designed to be gentle on acrylic shells and equipment while aggressive on internal residues, so it cleans without requiring harsh scrubbing. After the treatment you simply drain and refill, then resume your usual sanitizer regimen; no incompatible chemicals or complex protocol is necessary.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSafe for acrylic and standard hot tub materials when used as directed.\u003c\/li\u003e\n  \u003cli\u003eNo staining or abrasive action—designed for plumbing and jets.\u003c\/li\u003e\n  \u003cli\u003eWorks alongside FROG sanitizing products and typical sanitizer systems.\u003c\/li\u003e\n  \u003cli\u003ePrefilled single doses lower the risk of overuse or spills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to apply a single-dose gel treatment?\u003c\/h3\u003e\n\n\u003cp\u003eApplication is straightforward: add the premeasured gel to circulating water, run pumps to move the gel through the system, then drain and flush. The 2-pack gives you two single treatments for two maintenance cycles or for treating multiple spas.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrefilled single-dose packets—no measuring or mixing.\u003c\/li\u003e\n  \u003cli\u003eCirculate for the recommended time, then drain and rinse.\u003c\/li\u003e\n  \u003cli\u003eOne treatment per packet; two packets included per box.\u003c\/li\u003e\n  \u003cli\u003eMinimal handling reduces spills and user error.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG Pipe \u0026amp; Jet Cleanser is aimed at hot tub and swim spa owners, service technicians and property managers who want a simple, effective way to purge internal plumbing before refilling or during seasonal maintenance. If you want to reduce persistent cloudiness, improve sanitizer performance and avoid time-consuming scrubbing, this single-dose gel offers a professional-style flush with straightforward application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do I run the pumps when using this gel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Circulate according to the packet instructions—typically enough time to move the gel through all jets before draining, usually 15–30 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this damage my hot tub or shell?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it’s formulated for hot tub plumbing and common shell materials when used as directed; it cleans internally without abrasive action.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54200048386232,"sku":"B0FY3VL5KC","price":75.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-pipe-jet-cleanser-front-packaging.jpg?v=1790606590"},{"product_id":"frog-ease-test-strips-for-hot-tubs-swim-spas-60-count-smartchlor-ph-hardness-checks","title":"FROG @ease Test Strips for Hot Tubs \u0026 Swim Spas, 60 Count — SmartChlor, pH \u0026 Hardness Checks","description":"\u003cp\u003e\u003cstrong\u003eFROG @ease Test Strips for Hot Tubs \u0026amp; Swim Spas are quick color-change strips that check SmartChlor, pH, total alkalinity, and hardness so you can keep water balanced with your FROG system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping spa water balanced is essential for comfort and equipment life. These test strips are formulated specifically for the FROG @ease sanitizing system, making it simple to confirm when your SmartChlor Cartridge needs replacement and whether pH, total alkalinity, and hardness fall within recommended ranges. Sold in packs of 60 (two bottles of 30 strips each), they’re designed for weekly checks at home so you spend less time guessing and more time enjoying your hot tub or swim spa.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these strips work with the FROG @ease SmartChlor system?\u003c\/h3\u003e\n\u003cp\u003eThe strips are tuned to detect the SmartChlor chemistry used by FROG @ease, so a single color match can indicate cartridge status and water balance. They’re easier to interpret than multi-step tests and reduce the need for additional testing gear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-strip reading for SmartChlor exposure and cartridge replacement indicators\u003c\/li\u003e\n  \u003cli\u003eTests pH, total alkalinity, and total hardness with clear color changes\u003c\/li\u003e\n  \u003cli\u003eDesigned for hot tubs and swim spas treated with FROG @ease only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly can I get an accurate reading?\u003c\/h3\u003e\n\u003cp\u003eResults appear in seconds: dip, remove, then compare to the color chart on the bottle. The process is direct so you can decide quickly whether to adjust pH, alkalinity, hardness, or change the SmartChlor Cartridge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDip strip into spa water for an instant reaction\u003c\/li\u003e\n  \u003cli\u003eMatch colors to the printed chart for immediate guidance\u003c\/li\u003e\n  \u003cli\u003eRecommended weekly checks to maintain consistent water balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance decisions can these strips help me make?\u003c\/h3\u003e\n\u003cp\u003eThey guide routine maintenance actions without complex chemistry knowledge. Use the readings to determine if pH or alkalinity adjustments are needed, whether water hardness is acceptable, or if the SmartChlor Cartridge should be replaced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdentify when to add pH increaser or decreaser\u003c\/li\u003e\n  \u003cli\u003eFlag low or high total alkalinity for correction\u003c\/li\u003e\n  \u003cli\u003eAlert you to replace the SmartChlor Cartridge based on its color indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these strips suitable for every hot tub and swim spa owner?\u003c\/h3\u003e\n\u003cp\u003eThey’re ideal for owners using the FROG @ease sanitizing system. If you use a different chlorine or bromine system, these strips won’t give the intended SmartChlor reading and you should choose strips matched to that chemistry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with any hot tub or swim spa paired with FROG @ease\u003c\/li\u003e\n  \u003cli\u003eNot recommended for non-FROG water care systems\u003c\/li\u003e\n  \u003cli\u003eEach bottle includes 30 strips; total pack counts 60 strips for ongoing testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG @ease Test Strips are for hot tub and swim spa owners who use the FROG @ease SmartChlor cartridge system and want a fast, easy way to check whether their sanitizer is active and the water’s pH, alkalinity, and hardness are within suggested ranges. They suit homeowners who prefer simple color-match testing over more complex titration kits and who test regularly to protect water quality and spa components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I use FROG @ease Test Strips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Test at least once per week, or more after heavy use, to confirm SmartChlor and water balance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these strips with other sanitizers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These strips are formulated for FROG @ease SmartChlor systems and may not read correctly with others.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54200098160824,"sku":"B0D7F2CMBX","price":66.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-asease-bottle-front.jpg?v=1790607147"},{"product_id":"frog-pool-hot-tub-test-strips-100-count-fast-4-parameter-readings-for-chlorine-bromine-ph","title":"FROG Pool \u0026 Hot Tub Test Strips, 100 Count — Fast 4-Parameter Readings for Chlorine\/Bromine \u0026 pH","description":"\u003cp\u003e\u003cstrong\u003eFROG Test Strips for Pools \u0026amp; Hot Tubs are a 100-count pack of fast-read strips designed to monitor free chlorine or bromine, pH, alkalinity and hardness for pools and hot tubs using FROG systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping pool and hot tub chemistry in balance is easier when you can measure key levels quickly. These test strips are formulated specifically to work with FROG Fresh Mineral Water and other FROG sanitizing systems, where lower free chlorine or bromine readings are expected. Packaged for convenience, they deliver instant color readings against a printed chart on the bottle so you can adjust treatments without guesswork.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these strips work with FROG mineral-based sanitizers?\u003c\/h3\u003e\n\u003cp\u003eThe strips are calibrated to detect the reduced free chlorine or bromine concentrations typical of FROG Fresh Mineral Water systems. That means the color responses and threshold ranges reflect the lower sanitizer settings FROG products maintain, giving you accurate, actionable readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasures free chlorine or bromine at levels used in FROG systems\u003c\/li\u003e\n  \u003cli\u003eColor chart printed on bottle for immediate comparison\u003c\/li\u003e\n  \u003cli\u003eDipped for two seconds for a quick result\u003c\/li\u003e\n  \u003cli\u003eCompatible with pools, hot tubs and swim spas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly do these strips test and why that matters?\u003c\/h3\u003e\n\u003cp\u003eEach strip checks four critical parameters: free chlorine or bromine, total alkalinity, pH and hardness. Those four values are the foundation of water balance—keeping them within range protects equipment, improves bather comfort and helps sanitizers work efficiently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFree chlorine or bromine: ensures sanitizer level is effective\u003c\/li\u003e\n  \u003cli\u003epH: avoids corrosion or scale and improves comfort\u003c\/li\u003e\n  \u003cli\u003eTotal alkalinity: stabilizes pH to prevent swings\u003c\/li\u003e\n  \u003cli\u003eHardness: prevents scaling and keeps water clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast and easy are readings with these strips?\u003c\/h3\u003e\n\u003cp\u003eReadings are immediate—dip a strip for two seconds, remove it and match the colors to the bottle chart. The strips are designed for straightforward home use, with a single two-second dip and quick visual comparison, so routine testing fits into regular maintenance without special equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-second dip action for fast testing\u003c\/li\u003e\n  \u003cli\u003eInstant color comparison on bottle chart\u003c\/li\u003e\n  \u003cli\u003eIndividual strips stored in a resealable bottle to preserve accuracy\u003c\/li\u003e\n  \u003cli\u003e100-strip supply covers frequent testing schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I interpret results and take action?\u003c\/h3\u003e\n\u003cp\u003eUse the bottle chart to determine whether each value is within the recommended range for your pool or hot tub. If a reading falls outside the target, follow FROG system guidelines or standard water care adjustments—raise or lower pH, adjust alkalinity, or add sanitizer as indicated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow free chlorine\/bromine: check FROG cartridge status and sanitizer level\u003c\/li\u003e\n  \u003cli\u003eHigh or low pH: use pH increaser or decreaser per product instructions\u003c\/li\u003e\n  \u003cli\u003eAlkalinity out of range: correct slowly to avoid pH swings\u003c\/li\u003e\n  \u003cli\u003eHigh hardness: consider water treatment or dilution for correction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Pool and hot tub owners using FROG Fresh Mineral Water or other FROG sanitizing systems who want rapid, system-compatible testing without the complexity of digital meters. These 100 strips suit homeowners who test often, caretakers overseeing multiple water features, and anyone who prefers a simple dip-and-read routine rather than chemical titration. They are particularly helpful when you need readings tailored to lower sanitizer concentrations, saving time and helping you maintain balanced, comfortable water.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I test my pool or hot tub with these strips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Test at least twice a week for pools and before each use for hot tubs; increase frequency after heavy use or rain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these strips accurate with FROG mineral cartridges?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are calibrated for the lower free chlorine or bromine levels typical of FROG Fresh Mineral Water systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54200419123384,"sku":"B0D7K6SH2M","price":75.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-test-strips-front-bottle.jpg?v=1790613065"},{"product_id":"frog-goodbye-phos-pool-phosphate-control-pods-3-pack-90-day-drop-n-go-skimmer-treatment-for-7-500-30-000-gal-prevents-algae","title":"FROG Goodbye Phos Pool Phosphate Control Pods, 3-Pack (90-Day) — Drop ’n Go Skimmer Treatment for 7,500–30,000 gal, Prevents Algae","description":"\u003cp\u003e\u003cstrong\u003eFROG 90-Day Goodbye Phos are prefilled Drop ‘n Go pods that remove and prevent phosphate buildup in pools for up to 90 days.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your pool water clearer and reduce algae risk by controlling phosphates—one of the nutrients algae use to thrive. These dry, concentrated pods are designed to simplify phosphate management: drop a pod into your skimmer, let it dispense for about 24 hours, then discard the spent pod when you clean the skimmer. The pack of three covers three months of treatment for pools sized 7,500 to 30,000 gallons, eliminating weekly measuring and messy spills.\u003c\/p\u003e\n\n\u003ch3\u003eHow does FROG Goodbye Phos work to keep pool water clearer?\u003c\/h3\u003e\n\u003cp\u003eThe pods release a no-phosphate formula that binds and removes phosphate from pool water, reducing the food source algae need. With lower phosphate levels, other sanitizers and treatments work more effectively and the overall clarity improves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrefilled Drop ‘n Go pods for direct skimmer placement\u003c\/li\u003e\n  \u003cli\u003eDry, concentrated chemistry that disperses over about 24 hours\u003c\/li\u003e\n  \u003cli\u003eReduces nutrient levels so sanitizers stay more effective\u003c\/li\u003e\n  \u003cli\u003eHelps prevent visible algae blooms by removing phosphate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the pods safely and correctly?\u003c\/h3\u003e\n\u003cp\u003ePlace one pod in your pool skimmer and allow it to dispense into the circulation for roughly 24 hours. After the pod has emptied, discard it when you next clean or empty the skimmer; no measuring or weekly dosing required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse one pod per month for pools between 7,500–30,000 gallons\u003c\/li\u003e\n  \u003cli\u003eDrop each pod directly into the skimmer—no dissolving in the pool surface\u003c\/li\u003e\n  \u003cli\u003eDispose of spent pods when performing routine skimmer maintenance\u003c\/li\u003e\n  \u003cli\u003eFollow standard pool safety: keep away from children and pets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my pool size and routine maintenance schedule?\u003c\/h3\u003e\n\u003cp\u003eYes—each three-pod pack provides three months of coverage for pools from 7,500 up to 30,000 gallons. It’s designed to replace weekly phosphate treatments with a monthly, hassle-free solution that integrates with your existing maintenance routine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 pods = 90 days of protection (one pod per month)\u003c\/li\u003e\n  \u003cli\u003eWorks for both in-ground and above-ground pools within the stated range\u003c\/li\u003e\n  \u003cli\u003eComplements regular sanitizer and filtration schedules\u003c\/li\u003e\n  \u003cli\u003eReduces frequency of manual phosphate testing and dosing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any special precautions or compatibility notes?\u003c\/h3\u003e\n\u003cp\u003eThe pods are formulated to be used alongside standard pool sanitizers and FROG’s water care systems, but you should always follow label directions. Avoid placing pods directly in water circulation returns or in shallow areas—use the skimmer as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for skimmer use only; do not float in the pool\u003c\/li\u003e\n  \u003cli\u003eCompatible with chlorine and bromine sanitizers when used per instructions\u003c\/li\u003e\n  \u003cli\u003eStore unopened pods in a cool, dry place away from children and pets\u003c\/li\u003e\n  \u003cli\u003eDo not mix with other chemicals; follow the product label for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? FROG 90-Day Goodbye Phos is aimed at pool owners who want a low-effort way to manage phosphate levels—homeowners with mid-to-large pools (7,500–30,000 gallons), seasonal and year-round swimmers, and anyone looking to reduce algae problems without weekly measuring. If you prefer premeasured, slip-resistant dosing that integrates with your current sanitizer plan and saves time on routine maintenance, these pods offer a straightforward, three-month phosphate management solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many pods do I use each month?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use one pod per month; the three-pack covers three months for pools 7,500–30,000 gallons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Where should I place the pod?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Drop the pod into your pool skimmer and discard the spent pod when you empty the skimmer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54200620253368,"sku":"B0DQ6121BH","price":94.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-90-day-goodbye-phos-front-packaging.jpg?v=1790616388"},{"product_id":"frog-target-total-alkalinity-increaser-for-hot-tubs-swim-spas-2-pack-fast-dissolving-trudose-cap","title":"FROG TArget Total Alkalinity Increaser for Hot Tubs \u0026 Swim Spas, 2-Pack — Fast-Dissolving, TruDose Cap","description":"\u003cstrong\u003eFROG TArget is a fast-dissolving alkalinity increaser that raises and stabilizes total alkalinity in hot tubs and swim spas to support balanced pH and reliable sanitizer performance.\u003c\/strong\u003e\n\n\u003cp\u003eKeeping total alkalinity in the correct range prevents rapid pH swings, reduces corrosion and scaling, and helps sanitizers work more consistently. This two-pack delivers a concentrated, quick-dissolving formula designed specifically for hot tubs and swim spas, paired with FROG's TruDose cap to make measuring and adding product straightforward and spill-free.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will FROG TArget change my hot tub’s alkalinity?\u003c\/h3\u003e\n\u003cp\u003eThe formula dissolves rapidly so you can see results in a short time after application. Most users notice the alkalinity reading adjusts within a single circulation cycle, depending on tub size and current water chemistry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-dissolving granules formulated for rapid dispersion.\u003c\/li\u003e\n  \u003cli\u003eWorks within one or a few filtration cycles in most systems.\u003c\/li\u003e\n  \u003cli\u003eInstructions provide dosing by alkalinity increase and water volume.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it work with my sanitizer or mineral system?\u003c\/h3\u003e\n\u003cp\u003eFROG TArget is compatible with chlorine, bromine and salt-based sanitizers, and it integrates with FROG’s mineral technology and prefilled cartridges without interfering with their function. The product focuses on alkalinity; it won’t replace sanitizer but helps keep the environment where sanitizers perform best.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for use with chlorine, bromine, and salt systems.\u003c\/li\u003e\n  \u003cli\u003eCompatible alongside FROG mineral cartridges and other water care products.\u003c\/li\u003e\n  \u003cli\u003eDosing guidance covers both hot tubs and swim spas of various sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I measure and add the right amount safely?\u003c\/h3\u003e\n\u003cp\u003eEach bottle uses the FROG TruDose measuring cap to simplify dosing and avoid spills. The translucent cap features cup and tablespoon markings so you can follow the instructions without extra tools or calculations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTruDose cap seals to prevent spills and provides clear volume indicators.\u003c\/li\u003e\n  \u003cli\u003eNo separate measuring cup required—cap doubles as dispenser.\u003c\/li\u003e\n  \u003cli\u003eInstructions are concise and pair with any standard test strip for verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat else should I know before using it in my spa?\u003c\/h3\u003e\n\u003cp\u003eTest total alkalinity and pH before adding product to determine exact dosing. After application, run the pump and retest to confirm levels are within the recommended range; adjust with small, measured additions if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse FROG test strips or any standard test strip to read alkalinity and pH.\u003c\/li\u003e\n  \u003cli\u003eApply product with circulation and retest after one filtration cycle.\u003c\/li\u003e\n  \u003cli\u003eFollow safety instructions on the label and store bottles upright and sealed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG TArget is aimed at hot tub and swim spa owners who want a simple, effective way to raise and stabilize total alkalinity. It’s a practical choice for first-time spa owners who prefer guided measuring, seasoned users who value compatibility with chlorine, bromine or salt systems, and anyone using FROG mineral cartridges who needs consistent water balance. If you test regularly and follow the dosing directions, this two-pack supplies enough product and the TruDose convenience to keep water chemistry steady between maintenance sessions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know how much to add?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Test alkalinity first, then follow the label dosing chart and use the TruDose cap for precise amounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it with saltwater hot tubs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—FROG TArget works with salt, chlorine, and bromine systems without interfering with sanitizers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54204182298808,"sku":"B0FLRP425Y","price":96.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-target-front-packaging.jpg?v=1790625591"},{"product_id":"frog-stomps-non-chlorine-shock-for-hot-tubs-swim-spas-1-pack-fast-dissolving-oxidizer-with-trudose-cap","title":"FROG StoMPS Non-Chlorine Shock for Hot Tubs \u0026 Swim Spas, 1-Pack — Fast-Dissolving Oxidizer with TruDose Cap","description":"\u003cp\u003e\u003cstrong\u003eFROG StoMPS is a non-chlorine oxidizing shock designed to quickly remove organic contaminants and refresh hot tub or swim spa water without adding chlorine.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaintaining clear, comfortable water in your hot tub or swim spa starts with effective oxidation of bather waste, oils and other organics that burden sanitizers. FROG StoMPS is a fast-dissolving, chlorine-free shock that complements any sanitizer system — chlorine, bromine or salt — and helps restore water clarity and reduce residual chemical smell. Its easy-to-use TruDose measuring cap and straightforward dosing directions remove guesswork, so you spend more time enjoying your spa and less time balancing chemicals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does FROG StoMPS improve my hot tub water quality?\u003c\/h3\u003e\n\u003cp\u003eStoMPS oxidizes and breaks down organics and contaminants that consume sanitizer power, allowing your sanitizer to work more effectively and keeping water clearer and softer-feeling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRapidly dissolving formula targets bather waste and debris.\u003c\/li\u003e\n  \u003cli\u003eReduces lingering chemical odors associated with overwhelmed sanitizers.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent cloudy water and extends the life of your sanitizer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it easy to dose and use with my current sanitizer?\u003c\/h3\u003e\n\u003cp\u003eYes — FROG StoMPS uses the TruDose cap for spill-free, accurate measuring and is fully compatible with chlorine, bromine or salt systems in any hot tub or swim spa size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTranslucent TruDose cap shows cup and tablespoon indicators for precise dosing.\u003c\/li\u003e\n  \u003cli\u003eClear label instructions remove the need for complex calculations.\u003c\/li\u003e\n  \u003cli\u003eWorks alongside any standard test strip for quick water checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I add StoMPS to my maintenance routine?\u003c\/h3\u003e\n\u003cp\u003eUse StoMPS as a regular oxidizer bump or whenever the water looks dull, smells strong, or after heavy use to restore sanitizer effectiveness and clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdd after heavy spa use, parties or long intervals between treatments.\u003c\/li\u003e\n  \u003cli\u003eUse as part of weekly maintenance to maintain optimal water quality.\u003c\/li\u003e\n  \u003cli\u003eFollow dosage guide for hot tubs versus larger swim spa volumes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes StoMPS work with FROG Mineral Technology and cartridges?\u003c\/h3\u003e\n\u003cp\u003eStoMPS complements FROG’s mineral systems and prefilled cartridges by oxidizing contaminants while the minerals and cartridges manage ongoing sanitizer delivery and water softness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with FROG Mineral Technology and standard sanitizer setups.\u003c\/li\u003e\n  \u003cli\u003eHelps minerals and cartridges perform more efficiently by clearing oxidizable load.\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine pairing, not as a standalone sanitizer replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG StoMPS is made for hot tub and swim spa owners who want a quick, chlorine-free oxidizer to refresh water, reduce odors and support their existing sanitizer system. It’s ideal for users who prefer simple, fail-safe dosing (thanks to the TruDose cap), anyone operating FROG mineral\/cartridge systems, and owners of all hot tub and swim spa sizes seeking clearer, more comfortable water without adding chlorine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use FROG StoMPS with chlorine or bromine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. StoMPS is a non-chlorine oxidizer compatible with chlorine, bromine, or salt sanitizers and designed to boost their effectiveness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I shock my hot tub with StoMPS?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use StoMPS after heavy use, when water looks dull or smells strong, or as a weekly oxidizer according to the dosage guide.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54204224045240,"sku":"B0FLRJVT65","price":85.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-stomps-front-label.jpg?v=1790626198"},{"product_id":"frog-ph-ta-decreaser-for-hot-tubs-swim-spas-2-pack-fast-dissolving-trudose-cap","title":"FROG pH \u0026 TA Decreaser for Hot Tubs \u0026 Swim Spas, 2-Pack — Fast-Dissolving TruDose Cap","description":"\u003cp\u003e\u003cstrong\u003eFROG DropH is a fast-dissolving pH and total alkalinity (TA) decreaser designed to quickly lower and stabilize pH and alkalinity in hot tubs and swim spas using an easy-to-read measuring cap.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping pH and total alkalinity within the right range is essential for clear, comfortable water and for sanitizers to work effectively. FROG DropH comes in a two-pack and uses a TruDose measuring cap that eliminates complicated calculations and reduces spills. It dissolves quickly, works with chlorine, bromine, or salt systems, and includes straightforward dosing guidance so you can restore balanced water in minutes.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will FROG DropH lower my hot tub's pH?\u003c\/h3\u003e\n\u003cp\u003eDropH is formulated to dissolve rapidly so you can adjust pH without long wait times. Results depend on water volume, current pH\/TA levels, and circulation, but you should see measurable change after full circulation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-dissolving powder for quicker distribution\u003c\/li\u003e\n  \u003cli\u003eUse with running circulation for best effect\u003c\/li\u003e\n  \u003cli\u003eFollow dosing chart for specific tub or swim spa capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I dose FROG DropH safely and accurately?\u003c\/h3\u003e\n\u003cp\u003eThe FROG TruDose measuring cap is translucent and marked with cup and tablespoon indicators so you can measure without math. Add recommended amounts to the test site or skimmer while the pump runs, then retest after circulation and adjust if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTranslucent TruDose cap with clear volume markings\u003c\/li\u003e\n  \u003cli\u003eNo calculations required—follow the included dosage guide\u003c\/li\u003e\n  \u003cli\u003eRetest pH and TA after 30–60 minutes of circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill FROG DropH work with my sanitizer and spa size?\u003c\/h3\u003e\n\u003cp\u003eYes — the formula is compatible with chlorine, bromine, and salt systems and the dosage chart covers both hot tubs and swim spas of various capacities. The product is designed for flexible use across different water chemistries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with all common sanitizer types\u003c\/li\u003e\n  \u003cli\u003eDosage instructions for different tub volumes and swim spas\u003c\/li\u003e\n  \u003cli\u003eSuitable for residential and small commercial hot tubs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat routine steps keep my spa balanced after using DropH?\u003c\/h3\u003e\n\u003cp\u003eMaintain balance by testing regularly, using the TruDose cap for adjustments, and combining DropH with routine sanitizer and mineral cartridge care. Keeping total alkalinity in range helps prevent frequent pH swings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTest pH and TA regularly with FROG or standard strips\u003c\/li\u003e\n  \u003cli\u003eAdjust alkalinity first, then fine-tune pH as needed\u003c\/li\u003e\n  \u003cli\u003eRun circulation after dosing and retest before bathing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG DropH is aimed at hot tub and swim spa owners who want a simple, accurate way to lower pH and total alkalinity without guesswork. It suits busy homeowners, rental operators, and anyone using chlorine, bromine, or salt systems who values clear instructions, fast-dissolving performance, and the convenience of a precision measuring cap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use FROG DropH with a saltwater hot tub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. DropH is compatible with salt systems as well as chlorine and bromine sanitizers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long after dosing should I retest pH?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Run circulation for 30–60 minutes, then retest pH and alkalinity and adjust if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54204326019256,"sku":"B0FLRBHYHB","price":100.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-droph-front-packaging_cfc43377-101d-49c8-9996-c0df29eae7ec.jpg?v=1790628913"},{"product_id":"frog-ph-increaser-for-hot-tubs-swim-spas-2-pack-fast-dissolving-powder-with-trudose-measuring-cap","title":"FROG pH Increaser for Hot Tubs \u0026 Swim Spas, 2-Pack — Fast-Dissolving Powder with TruDose Measuring Cap","description":"\u003cp\u003e\u003cstrong\u003eFROG JumpH is a fast-dissolving pH increaser specially formulated to raise and stabilize pH in hot tubs and swim spas for clearer, more comfortable water.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping hot tub and swim spa water balanced is essential for comfort, equipment longevity, and sanitizer performance. FROG JumpH pH Increaser comes in an easy-to-measure 2-pack and dissolves rapidly so you can quickly correct low pH, reduce corrosive conditions, and improve bather comfort. The product is compatible with chlorine, bromine, and salt systems and includes FROG’s TruDose measuring cap for spill-free, accurate dosing.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will FROG JumpH change my hot tub's pH?\u003c\/h3\u003e\n\u003cp\u003eFROG JumpH is designed to dissolve fast so you can see pH changes within minutes of circulating the water. For precise results, add the measured dose, run the jets for a few minutes, then retest and repeat only if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-dissolving powder for rapid mixing\u003c\/li\u003e\n  \u003cli\u003eUse jets or pump to distribute product evenly\u003c\/li\u003e\n  \u003cli\u003eRetest after a short circulation period\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I dose JumpH safely and accurately?\u003c\/h3\u003e\n\u003cp\u003eThe included FROG TruDose cap has clear cup and tablespoon markings so you can measure without guesswork. Follow the dosing guide on the bottle, add to the water away from bathers, run the circulation, and wait before adjusting further.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTranslucent measuring cap prevents over- or under-dosing\u003c\/li\u003e\n  \u003cli\u003eSeparate dosing instructions for hot tubs and swim spas\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard test strips or FROG test strips for readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill JumpH work with my sanitizer or salt system?\u003c\/h3\u003e\n\u003cp\u003eYes — FROG JumpH is compatible with chlorine, bromine, and salt-based sanitizing systems. It targets pH adjustment only and does not interfere with the performance of your sanitizer when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for use in chlorinated and brominated systems\u003c\/li\u003e\n  \u003cli\u003eSuitable for saltwater hot tubs and swim spas\u003c\/li\u003e\n  \u003cli\u003eHelps maintain sanitizer effectiveness by keeping pH in range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance benefits can I expect from regular use?\u003c\/h3\u003e\n\u003cp\u003eMaintaining pH between 7.2 and 7.8 reduces corrosion risk, improves water clarity, and helps minimize skin and eye irritation. Regular monitoring and occasional dosing with JumpH keeps the hot tub environment balanced so sanitizers can work efficiently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtects heaters, pumps, and other equipment from low-pH corrosion\u003c\/li\u003e\n  \u003cli\u003eSupports clearer water and better sanitizer activity\u003c\/li\u003e\n  \u003cli\u003eReduces the likelihood of bather discomfort from acidic water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG JumpH is ideal for hot tub and swim spa owners who want a fast, reliable way to raise low pH without complex calculations. It suits users of all experience levels thanks to the TruDose measuring cap, and it's a convenient choice for anyone running chlorine, bromine, or salt systems who wants to protect equipment and improve swimmer comfort. Packaged as a two-bottle set, it’s a practical option for seasonal maintenance or regular pH management.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can retest pH after adding JumpH?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Run the pump for a few minutes and retest; most changes are measurable within 5–15 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use JumpH with a saltwater hot tub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. FROG JumpH is compatible with chlorine, bromine, and salt systems when used as directed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54204547498168,"sku":"B0FLRLP6NQ","price":91.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-jumph-front-packaging.jpg?v=1790632965"},{"product_id":"frog-jumph-target-ph-and-ta-increaser-for-hot-tubs-swim-spas-1-smart-dose-cap-fast-ph-alkalinity-correction","title":"FROG JumpH \u0026 TArget pH and TA Increaser for Hot Tubs \u0026 Swim Spas — 1 Smart Dose Cap, Fast pH\/Alkalinity Correction","description":"\u003cp\u003e\u003cstrong\u003eFROG JumpH \u0026amp; TArget is a precision pH and total alkalinity increaser formulated to raise and stabilize water chemistry in hot tubs and swim spas for clearer, more comfortable water.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMaintaining balanced pH and total alkalinity (TA) is essential for effective sanitization, equipment longevity and comfortable bathing. FROG JumpH \u0026amp; TArget provides a straightforward way to correct low pH and low TA without complicated calculations. The product pairs with FROG TruDose technology for measured dosing, and it works safely alongside chlorine, bromine, or salt systems in any hot tub or swim spa.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will FROG JumpH \u0026amp; TArget raise my pH and alkalinity?\u003c\/h3\u003e\n\n\u003cp\u003eResults depend on water volume and current chemistry readings, but JumpH \u0026amp; TArget is designed to deliver measurable changes after a single dose and mixing cycle. Always retest after circulation and adjust with small, repeat doses for precise control.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdd to circulating water and allow full turnover before retesting.\u003c\/li\u003e\n  \u003cli\u003eUse FROG TruDose cap for repeatable, spill-free measurement.\u003c\/li\u003e\n  \u003cli\u003eTitrate in small increments when making fine adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product work with my sanitizer or salt system?\u003c\/h3\u003e\n\n\u003cp\u003eYes — FROG JumpH \u0026amp; TArget is compatible with chlorine, bromine and salt chlorine generators used in hot tubs and swim spas. It affects only pH and TA, so it won’t interfere with your sanitizer’s active chemistry when used as directed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSafe to use with mineral systems and FROG mineral cartridges.\u003c\/li\u003e\n  \u003cli\u003eFollow sanitizer-specific dosing guidance if combined with shock or oxidizers.\u003c\/li\u003e\n  \u003cli\u003eAlways test sanitizer residuals after balancing pH\/TA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I measure and dose without complicated math?\u003c\/h3\u003e\n\n\u003cp\u003eFROG removes guesswork with the TruDose measuring cap that features cup and tablespoon markings. The translucent cap helps you deliver accurate, repeatable doses; combine that with a standard test strip for quick before-and-after checks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure with the TruDose cap—no conversion charts needed.\u003c\/li\u003e\n  \u003cli\u003eFollow the printed dosage table for hot tub or swim spa volumes.\u003c\/li\u003e\n  \u003cli\u003eRetest after circulation and adjust using small additional doses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does balancing pH and TA protect my hot tub and users?\u003c\/h3\u003e\n\n\u003cp\u003eKeeping pH between about 7.2 and 7.6 and proper TA improves sanitizer performance, reduces metal corrosion and minimizes skin or eye irritation. Balanced water also looks clearer and feels softer on the skin, while preventing scale or etching that can damage surfaces and heaters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eImproves sanitizer efficiency so you can maintain safe residuals.\u003c\/li\u003e\n  \u003cli\u003eReduces risk of corrosion to pumps, heaters and fittings.\u003c\/li\u003e\n  \u003cli\u003eMinimizes scale formation and protects plaster, acrylic and metal parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: FROG JumpH \u0026amp; TArget is aimed at hot tub and swim spa owners who want a simple, reliable way to raise and stabilize pH and total alkalinity without complicated chemistry. It suits new spa owners, busy households that prefer low-maintenance water care, and experienced technicians seeking a compatible, accurate alkalinity\/pH increaser for use alongside chlorine, bromine or salt systems. Use it with FROG test strips and the TruDose cap for straightforward, repeatable adjustments that keep water comfortable and equipment protected.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much JumpH \u0026amp; TArget do I add to my hot tub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dose using the TruDose cap and the printed volume chart; add small increments and retest after circulation for precise balance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with a salt chlorine generator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. FROG JumpH \u0026amp; TArget is compatible with salt systems, chlorine and bromine when used according to directions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54204547989688,"sku":"B0FLSWN26H","price":94.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-jumph-bottle-front-label.jpg?v=1790632992"},{"product_id":"frog-maintain-single-dose-non-chlorine-shock-pack-2-pack-for-swim-spas-premeasured-monopersulfate-oxidizer","title":"FROG Maintain Single-Dose Non-Chlorine Shock Pack — 2-Pack for Swim Spas, Premeasured Monopersulfate Oxidizer","description":"\u003cp\u003e\u003cstrong\u003eFROG Maintain is a single-dose, non-chlorine shock designed to refresh swim spa water, removing organic contaminants and extending sanitizer life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your swim spa clear and comfortable with a monthly boost from FROG Maintain. This monopersulfate-based shock comes premeasured in convenient packets that dissolve quickly and are formulated to work alongside the FROG @ease SmartChlor Cartridge system. Each single-dose packet treats swim spas up to 3,000 gallons and helps maintain water clarity without adding chlorine.\u003c\/p\u003e\n\n\u003ch3\u003eHow often should I use FROG Maintain in my swim spa?\u003c\/h3\u003e\n\n\u003cp\u003eUse FROG Maintain about three weeks after you install the FROG @ease for Swim Spas System, and then monthly as part of routine upkeep. It provides a targeted oxidation treatment that prolongs the effective life of the SmartChlor Cartridge and helps control organic buildup between regular sanitizer dosings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMonthly single-dose application for ongoing maintenance\u003c\/li\u003e\n  \u003cli\u003eAdd roughly three weeks after starting the FROG @ease system\u003c\/li\u003e\n  \u003cli\u003eExtends SmartChlor Cartridge effectiveness by about one additional week\u003c\/li\u003e\n  \u003cli\u003eTreats swim spas up to 3,000 gallons per packet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does non-chlorine shock mean and why choose it?\u003c\/h3\u003e\n\n\u003cp\u003eNon-chlorine shock refers to an oxidizer that clears organic contaminants without adding free chlorine to the water. FROG Maintain uses monopersulfate to oxidize oils, lotions, and other organics that cloud water or stress sanitizers, making it a neutral complement to your existing SmartChlor setup.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMonopersulfate-based oxidizer—no extra chlorine introduced\u003c\/li\u003e\n  \u003cli\u003eTargets organic waste that reduces sanitizer performance\u003c\/li\u003e\n  \u003cli\u003eSafe to use with most swim spa chemical programs (avoid biguanides)\u003c\/li\u003e\n  \u003cli\u003eDissolves rapidly for quick, low-fuss treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply FROG Maintain and what should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eApplication is simple: cut open the prefilled packet and pour the contents into circulating water. The powder dissolves quickly, clears organic debris, and restores water clarity without lengthy downtime; normal swim spa use can typically resume once the product has dissolved and circulated.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrefilled packet—no measuring required\u003c\/li\u003e\n  \u003cli\u003ePour into circulating spa water for fast dissolution\u003c\/li\u003e\n  \u003cli\u003eWorks quietly in the background—minimal downtime\u003c\/li\u003e\n  \u003cli\u003eHelps maintain softer, clearer water in tandem with FROG minerals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs FROG Maintain compatible with my other swim spa chemicals?\u003c\/h3\u003e\n\n\u003cp\u003eFROG Maintain is formulated to blend with most swim spa water care regimens but should not be mixed with biguanide-based systems. It pairs especially well with FROG's patented Mineral Technology and the SmartChlor Cartridge, helping the overall program run more efficiently and keeping sanitizer levels stable.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with FROG @ease Mineral and SmartChlor systems\u003c\/li\u003e\n  \u003cli\u003eWorks alongside common spa chemicals except biguanides\u003c\/li\u003e\n  \u003cli\u003eHelps reduce the burden on sanitizers by removing organics\u003c\/li\u003e\n  \u003cli\u003eManufactured with over 25 years of FROG water care expertise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG Maintain is made for swim spa owners who want an easy, monthly oxidation boost that keeps water clear without raising chlorine levels. It’s ideal for users of the FROG @ease system seeking low-maintenance, effective water care, and for anyone who prefers premeasured convenience and compatibility with mineral and SmartChlor technology.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use FROG Maintain with chlorine systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. FROG Maintain is a non-chlorine oxidizer compatible with chlorine systems and works especially well with FROG SmartChlor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can use the swim spa after adding it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Once the packet dissolves and the water has circulated, you can generally use the swim spa with minimal wait time.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54205598171320,"sku":"B0CQMGZYK5","price":100.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-maintain-front-packet.jpg?v=1790644438"},{"product_id":"frog-pool-frog-model-5400-replacement-mineral-reservoir-prefilled-6-month-cartridge-direct-fit-for-model-5400-xl-pro-cyclers","title":"FROG Pool FROG Model 5400 Replacement Mineral Reservoir — Prefilled 6-Month Cartridge, Direct-Fit for Model 5400 \u0026 XL PRO Cyclers","description":"\u003cstrong\u003eFROG Pool FROG Model 5400 Replacement Mineral Reservoir is a prefilled six-month mineral cartridge that supplies sanitizing minerals to Pool FROG Model 5400 and XL PRO Cyclers for cleaner, softer pool water.\u003c\/strong\u003e\n\n\u003cp\u003eKeep your pool water clearer and gentler with a hassle-free mineral cartridge engineered to work with FROG Cyclers. This replacement reservoir ships prefilled with FROG's patented mineral blend and is designed for a simple drop-in swap every six months or one pool season. It pairs with FROG Bac Pacs (sold separately) to provide balanced, automatic sanitization and to lower the need for free chlorine.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this mineral reservoir fit my Pool FROG Model 5400 or XL PRO Cycler?\u003c\/h3\u003e\n\u003cp\u003eThe cartridge is shaped to match the original Pool FROG Model 5400 reservoir and installs without tools. It slides into the Cycler housing and begins releasing minerals immediately, integrating with the unit's controlled delivery system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for Model 5400 and XL PRO Cyclers\u003c\/li\u003e\n  \u003cli\u003ePrefilled cartridge — no measuring or pouring\u003c\/li\u003e\n  \u003cli\u003eTool-free drop-in replacement for quick swaps\u003c\/li\u003e\n  \u003cli\u003eStarts delivering minerals as soon as installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance schedule and lifespan should I expect?\u003c\/h3\u003e\n\u003cp\u003eEach reservoir is formulated to last approximately six months or one pool season under normal use. Replace the cartridge at the end of its service life or if you notice decreased performance to maintain steady sanitization.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical lifespan: about 6 months or one season\u003c\/li\u003e\n  \u003cli\u003eReplace with a new prefilled reservoir to restore mineral output\u003c\/li\u003e\n  \u003cli\u003eWorks continuously — no daily attention required\u003c\/li\u003e\n  \u003cli\u003ePair with Bac Pacs for complete sanitizing performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it affect chlorine usage and water feel?\u003c\/h3\u003e\n\u003cp\u003eThe FROG mineral reservoir is designed to significantly lower the amount of free chlorine required for sanitation when used as directed. By providing a steady supply of sanitizing minerals, it helps reduce chlorine demand and often results in water that feels softer and is easier on skin and swimwear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces chlorine demand — typically up to 50% when used with FROG systems*\u003c\/li\u003e\n  \u003cli\u003eContributes to softer-feeling water that’s gentler on skin\u003c\/li\u003e\n  \u003cli\u003eHelps keep water clearer by supporting consistent sanitization\u003c\/li\u003e\n  \u003cli\u003eWorks best alongside recommended Bac Pacs and proper pool chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about safety, compatibility, and supplies?\u003c\/h3\u003e\n\u003cp\u003eThe reservoir contains proprietary minerals formulated for Pool FROG systems; handle cartridges per label instructions and recycle packaging where possible. It’s intended specifically for the Model 5400 and XL PRO Cyclers and is not a standalone sanitizer—use it as part of the complete FROG maintenance routine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Pool FROG Model 5400 and XL PRO Cyclers only\u003c\/li\u003e\n  \u003cli\u003eNot a complete sanitizer by itself — use with Bac Pacs (sold separately)\u003c\/li\u003e\n  \u003cli\u003eFollow label directions for safe installation and disposal\u003c\/li\u003e\n  \u003cli\u003eStore unused cartridges in a cool, dry place away from children and pets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Pool FROG Model 5400 Replacement Mineral Reservoir is ideal for pool owners who want an easy-to-use, low-maintenance way to support ongoing sanitization and reduce reliance on manual chlorine dosing. It’s a good fit for families, frequent swimmers, and anyone using a FROG Model 5400 or XL PRO Cycler who prefers automated, consistent water care and a softer swimming experience. For complete results, install with the recommended FROG Bac Pacs and follow routine water testing and maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FROG mineral reservoir?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace the reservoir about every six months or at the end of one pool season for consistent mineral output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this mineral reservoir without a Bac Pac?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The reservoir supports minerals; use it with FROG Bac Pacs (sold separately) for complete pool sanitization.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54208225804472,"sku":"B0BF2MMTNG","price":304.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-mineral-reservoir-front-view.jpg?v=1790660161"},{"product_id":"frog-maintain-non-chlorine-hot-tub-shock-pack-12-single-dose-packets-premeasured-oxidizer-for-up-to-600-gal","title":"FROG Maintain Non-Chlorine Hot Tub Shock Pack — 12 Single-Dose Packets, Premeasured Oxidizer for Up to 600 gal","description":"\u003cp\u003e\u003cstrong\u003eFROG Maintain is a single-dose, non-chlorine shock designed to quickly dissolve and remove organic contaminants, restoring clarity to hot tub water without chlorine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFROG Maintain offers a convenient, premeasured monopersulfate shock packet for hot tubs up to 600 gallons. Formulated to work with FROG sanitizing systems, it refreshes water, reduces odors, and helps maintain balanced conditions between routine sanitizer doses. Because each dose is individually packaged, it eliminates measuring and direct handling of powder, making periodic shock treatment simple and mess-free.\u003c\/p\u003e\n\n\u003ch3\u003eHow often should I use FROG Maintain in my hot tub?\u003c\/h3\u003e\n\n\u003cp\u003eFrequency depends on the FROG sanitizing system you use: monthly with the FROG @ease system and weekly with the FROG Serene system. You can also use it as-needed after heavy use, parties, or when water appears dull or smells slightly off.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWith FROG @ease: add one packet once per month.\u003c\/li\u003e\n  \u003cli\u003eWith FROG Serene: add one packet once per week.\u003c\/li\u003e\n  \u003cli\u003eAfter heavy bather load or visible cloudiness: add one packet immediately.\u003c\/li\u003e\n  \u003cli\u003eEach packet treats up to 600 gallons; do not split doses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does non-chlorine shock mean and why choose it?\u003c\/h3\u003e\n\n\u003cp\u003eNon-chlorine shock refers to an oxidizer that does not contain chlorine; FROG Maintain uses monopersulfate to oxidize organic contaminants without adding free chlorine. This approach refreshes water clarity and reduces combined sanitizer demand while avoiding the residual smell and handling concerns associated with chlorine.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOxidizes oils, lotions, and organic debris rather than releasing chlorine.\u003c\/li\u003e\n  \u003cli\u003eCompatible with most hot tub chemical programs (except biguanides).\u003c\/li\u003e\n  \u003cli\u003eRapidly dissolving, leaving no gritty residue when used as directed.\u003c\/li\u003e\n  \u003cli\u003eSafe to use with FROG mineral and cartridge systems when instructions are followed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use a single-dose FROG Maintain packet safely and effectively?\u003c\/h3\u003e\n\n\u003cp\u003eUsing a single-dose packet is straightforward: cut the sealed packet open and pour the contents directly into the spa water, allowing it to dissolve fully before returning to normal use. Avoid combining with incompatible products and always follow the hot tub manufacturer’s circulation recommendations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCut open the prefilled packet; do not rinse or handle powder with bare hands.\u003c\/li\u003e\n  \u003cli\u003ePour directly into the hot tub water while jets circulate for even dispersion.\u003c\/li\u003e\n  \u003cli\u003eWait the recommended hold time on your hot tub or FROG instructions before using the spa.\u003c\/li\u003e\n  \u003cli\u003eDo not use with biguanide-based sanitizers; store packets in a cool, dry place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill FROG Maintain work with other hot tub chemicals and systems?\u003c\/h3\u003e\n\n\u003cp\u003eYes — FROG Maintain is formulated to be broadly compatible with common hot tub sanitizers and water care programs, except biguanide-based products. It is intended to complement the FROG mineral and cartridge technologies to optimize sanitizer performance and water clarity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with chlorine- and bromine-based programs and FROG mineral systems.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with biguanide (PHMB) sanitizers; avoid mixing.\u003c\/li\u003e\n  \u003cli\u003eDesigned for use as a periodic oxidizer, not as a continuous sanitizer.\u003c\/li\u003e\n  \u003cli\u003eFollow dosing intervals specific to your FROG sanitizing product for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FROG Maintain is ideal for hot tub owners who want an easy, premeasured non-chlorine shock to preserve water clarity without measuring powders or storing bulk chemicals. It suits individuals using FROG sanitizing systems who prefer scheduled maintenance—monthly or weekly depending on the system—and anyone who wants a quick solution after high bather loads or visible water cloudiness. This 12-pack provides a multi-month supply for routine upkeep of one hot tub up to 600 gallons per dose, making spike treatments and regular maintenance straightforward and reliable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use FROG Maintain with a biguanide sanitizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. FROG Maintain is not compatible with biguanide (PHMB) sanitizers; use with chlorine, bromine, or FROG systems instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many gallons does one packet treat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each single-dose FROG Maintain packet treats up to 600 gallons of hot tub water.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FROG","offers":[{"title":"Default Title","offer_id":54209958805688,"sku":"B0B1LPWBT2","price":170.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/frog-maintain-front-packet_3f25fe58-45f1-46ee-88c1-c8ec00f484d5.jpg?v=1790673591"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/frog-maintain-front-packet_3f25fe58-45f1-46ee-88c1-c8ec00f484d5.jpg?v=1790680075","url":"https:\/\/canadianlawn.ca\/collections\/frog.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}