{"title":"Fifchall","description":"\u003cp\u003eBrowse 27 Fifchall products at Canadian Lawn, including chainsaw chains, bars \u0026amp; oil. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"fifchall-14-inch-chainsaw-chain-2-pack-3-8-lp-050-gauge-52-drive-links-low-kickback-durable-cutters","title":"Fifchall 14-inch Chainsaw Chain 2-Pack — 3\/8\" LP, .050\" Gauge, 52 Drive Links, Low-Kickback Durable Cutters","description":"\u003cb\u003eTwo replacement 14-inch chainsaw chains (3\/8\" LP, .050\" gauge, 52 drive links) designed to fit most 14\" pole saws and chainsaws for reliable, low-kickback cutting.\u003c\/b\u003e\n\n\u003cp\u003eIf you need a ready pair of replacement chains for routine yard maintenance or to revive a small chainsaw, this Fifchall 2-pack gives you two 14-inch chains engineered for consistent performance. Each chain measures 18.9 inches overall length, uses a 3\/8\" low-profile pitch with a .050\" gauge and has 52 drive links—common dimensions for many consumer-grade electric and gas models. The links and rivets are heat-treated for strength, and the cutters are quenched to improve wear resistance and cutting smoothness.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these chains fit my saw?\u003c\/h3\u003e\n\u003cp\u003eThese chains match the most common 14-inch chainsaw specifications: 3\/8\" LP pitch, .050\" gauge and 52 drive links. Before ordering, confirm your saw or pole saw requires a 14-inch chain and check the drive link count stamped on the old chain or listed in your owner's manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChain length: 18.9 inches (fits 14\" bar)\u003c\/li\u003e\n  \u003cli\u003ePitch: 3\/8\" low profile (LP)\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" (1.3 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive links: 52\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and safety features do these chains offer?\u003c\/h3\u003e\n\u003cp\u003eFifchall chains are manufactured with quenched cutters and heat-treated rivets to balance durability and smooth cutting. The design targets low kickback behavior to align with common consumer safety expectations, and the hardened construction extends usable life with routine sharpening and maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuenched cutters for wear resistance and smoother cuts\u003c\/li\u003e\n  \u003cli\u003eHeat-treated rivets for stronger link connections\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet kickback performance guidelines used in consumer tools\u003c\/li\u003e\n  \u003cli\u003eSuitable for regular sharpening and resharpening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich brands and models are compatible with this chain?\u003c\/h3\u003e\n\u003cp\u003eThese chains are compatible with many popular 14-inch chainsaw and pole saw models from major brands. Compatibility depends on matching pitch, gauge and drive link count rather than brand name alone, but the pack lists common fits to help you cross-reference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCraftsman: S145, S1450, CMECS614\u003c\/li\u003e\n  \u003cli\u003eEcho: CS310 and similar 14\" models\u003c\/li\u003e\n  \u003cli\u003ePoulan, Ryobi, Greenworks, Sun Joe, Makita and Worx 14\" models\u003c\/li\u003e\n  \u003cli\u003eAlso fits many Homelite, Husqvarna, Remington and other consumer saws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these chains for best life?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: relieve bar tension, route the new chain over the sprocket and bar, then retension to the manufacturer’s specification. Routine maintenance—correct tensioning, proper lubrication, and timely sharpening—keeps cutting consistent and prolongs chain life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLoosen bar nuts, mount chain, snug chain and then tighten to spec\u003c\/li\u003e\n  \u003cli\u003eKeep the bar groove and oil port clean and filled with bar oil\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters when performance drops or after heavy use\u003c\/li\u003e\n  \u003cli\u003eReplace if links, rivets or cutters show cracks or excessive wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Homeowners, landscapers and anyone with a 14-inch chainsaw or pole saw who wants an affordable, ready-to-install spare set will appreciate this Fifchall 2-pack. It’s intended for routine yard work—pruning, limbing and light cutting—on electric and small gas saws that accept 3\/8\" LP, .050\" gauge, 52-drive-link chains. Always verify compatibility with your tool before use, follow the saw manufacturer’s safety instructions, and use proper personal protective equipment when operating a chainsaw.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 14-inch Ryobi chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Ryobi uses a 14\" bar with 3\/8\" LP pitch, .050\" gauge and 52 drive links; confirm by checking your manual or old chain markings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I sharpen these chains after use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These chains are made for resharpening; maintain correct filing angles and replace when cutters or rivets show excessive wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54192813408440,"sku":"B0BY468DVR","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-14-inch-chains.jpg?v=1790551332"},{"product_id":"fifchall-8-pole-saw-chains-3-8-lp-050-gauge-33-links-2-pack-heat-treated-low-kickback","title":"Fifchall 8\" Pole Saw Chains 3\/8\" LP .050\" Gauge 33 Links — 2-Pack, Heat-Treated Low-Kickback","description":"\u003cp\u003e\u003cstrong\u003eFifchall’s 8-inch replacement chains (3\/8\" LP pitch, .050\" gauge, 33 drive links) are a two-pack of hardened, low-kickback saw chains designed to fit most 8\" pole saw bars and restore fast, smooth cutting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your pole saw starts tugging, stalling or producing rough cuts, replacing the chain is the fastest way to regain power and control. These Fifchall chains are built for common 8-inch pole saw models — including Sun Joe SWJ800E\/SWJ806E, Greenworks, Portland, Chicago and many OEM equivalents — and come heat-treated for longer wear and reduced kickback. Below you’ll find clear answers to the most important buyer questions so you can confirm fit, performance and installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this chain fits my pole saw?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure four key dimensions on your saw\/bar: pitch, gauge, number of drive links, and bar length. The Fifchall chain listed here is 3\/8\" low-profile (LP) pitch, .050\" gauge with 33 drive links, made for 8\" bars. If those numbers match, the chain will physically fit your bar and sprocket system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePitch: 3\/8\" LP — check stamp on old chain or bar.\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" — measured where the drive link sits in the guide bar groove.\u003c\/li\u003e\n  \u003cli\u003eDrive links: 33 — count the metal teeth that sit in the bar groove.\u003c\/li\u003e\n  \u003cli\u003eBar length: suited for most 8\" pole saw bars; verify your bar’s stamped length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and safety features does this chain offer?\u003c\/h3\u003e\n\n\u003cp\u003eThese chains undergo deep quenching to raise surface hardness for better wear resistance and longer service life. They are designed to cut smoothly with minimized kickback characteristics that meet ANSI-related kickback performance expectations for consumer pole saw chains.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDeep-quench heat treatment for durability and edge retention.\u003c\/li\u003e\n  \u003cli\u003eLow-kickback profile to help with safer handling on pole saws.\u003c\/li\u003e\n  \u003cli\u003eSmooth-cutting cutters that reduce vibration and load on the motor.\u003c\/li\u003e\n  \u003cli\u003eTwo-chain pack for immediate replacement and backup in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pole saw models and part numbers are these compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eFifchall lists broad compatibility across popular pole saw brands and many listed OEM part references. The chain fits numerous Sun Joe, Greenworks, Portland, Chicago and Remington models and replaces common part numbers like S33, SG-S33, and related codes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Sun Joe SWJ800E, SWJ806E and similar models.\u003c\/li\u003e\n  \u003cli\u003eReplaces Greenworks chains listed for 20V–40V and corded pole saw models.\u003c\/li\u003e\n  \u003cli\u003eFits Portland\/Porter-Cable model numbers such as 62896\/63190 and many Harbor Freight variants.\u003c\/li\u003e\n  \u003cli\u003eCross-references: S33, SG-S33, 63PM333E, 91EX033 and others in the product description.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these replacement chains?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is a simple process: loosen the bar nuts, remove the old chain, fit the new chain onto the bar and sprocket, set tension, then retighten. Regular maintenance — correct tension, bar and chain lubrication, and routine sharpening — will keep cutting efficient and extend chain life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEnsure bar groove and sprocket are clean before installation.\u003c\/li\u003e\n  \u003cli\u003eSet chain tension so it snaps back into place but moves freely.\u003c\/li\u003e\n  \u003cli\u003eUse bar oil at recommended intervals and store chains dry to avoid rust.\u003c\/li\u003e\n  \u003cli\u003eSharpen or rotate chains as needed; replace when cutters are worn or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Fifchall 2-pack of 8\" chains is aimed at homeowners and landscapers who use light-duty pole saws and need an affordable, durable replacement. It’s a good match if you own compatible Sun Joe, Greenworks, Portland, Chicago or Remington pole saws and want a ready-to-install chain that restores cutting speed while prioritizing wear resistance and reduced kickback during routine trimming and branch removal.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Sun Joe SWJ800E pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your Sun Joe uses an 8\" bar with 3\/8\" LP pitch, .050\" gauge and 33 drive links, this Fifchall chain will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I set correct chain tension after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Loosen bar nuts, pull the bar tip to tension chain until it snaps back into place, then tighten nuts and recheck tension after a short test run.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54192891134136,"sku":"B0BD13G19C","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-8inch-chains.jpg?v=1790553956"},{"product_id":"fifchall-10-inch-chainsaw-replacement-chain-043-inch-gauge-3-8-inch-lp-40-drive-links-two-pack-heat-treated-semi-chisel","title":"Fifchall 10-inch chainsaw replacement chain .043-inch gauge 3\/8-inch LP, 40 drive links — two-pack, heat-treated semi-chisel","description":"\u003cp\u003e\u003cstrong\u003eThe Fifchall 10-inch replacement chains are .043\" gauge, 3\/8\" low-profile (LP) pitch, R40 configuration with 40 drive links supplied as a two-pack for compatible 10\" bars.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two replacement chains are engineered for light-duty electric and battery-powered pruning saws and pole saws that require a .043 inch (1.1 mm) gauge, 3\/8\" LP pitch, and 40 drive link R40 configuration. They are heat-treated, low-kickback semi-chisel chains designed to restore cutting performance quickly when your original chain is worn or damaged. Check your saw’s manual or the stamped numbers on your bar to confirm gauge, pitch and drive link count before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this chain will fit my 10\" chainsaw or pole saw?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on three measurements: gauge (.043\" vs .050\"), pitch (3\/8\" LP), and the number of drive links (40). This Fifchall chain is specifically .043\" gauge, 3\/8\" LP pitch, and 40 drive links, so it only fits bars and sprockets that match those specs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm the bar stamp or owner’s manual shows .043\" (1.1 mm) gauge.\u003c\/li\u003e\n  \u003cli\u003eEnsure the pitch is 3\/8\" low-profile (LP), not 3\/8\" standard.\u003c\/li\u003e\n  \u003cli\u003eCount or match the drive links to 40 for correct engagement.\u003c\/li\u003e\n  \u003cli\u003eLook up listed compatible models (Craftsman, Echo, Ryobi, Worx, Husqvarna) in your saw’s documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cutting characteristics and durability can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe chain is a heat-treated semi-chisel design built for smooth, efficient cutting with reduced kickback compared with full-chisel cutters. It balances sharpness and wear resistance so it stays useful longer in pruning and light-duty cutting tasks, while still being easy to file when needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel for improved wear resistance.\u003c\/li\u003e\n  \u003cli\u003eLow-kickback semi-chisel profile for safer, controlled cuts.\u003c\/li\u003e\n  \u003cli\u003eDesigned for good lubrication flow along the drive links and rails.\u003c\/li\u003e\n  \u003cli\u003eSuits pruning, limb-trimming, and occasional small log cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and routine maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eSwapping chains is straightforward: release bar tension, remove the old chain, loop the new chain over the sprocket and bar, then re-tension according to the tool manufacturer’s spec. Regular sharpening, correct tensioning, and proper oiling keep cutting performance consistent and extend the chain’s life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFollow your saw’s tension procedure to avoid derailment.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters with a compatible round file and file gauge.\u003c\/li\u003e\n  \u003cli\u003eUse bar and chain oil and keep the oil reservoir filled.\u003c\/li\u003e\n  \u003cli\u003eReplace when cutters are worn beyond safe sharpening limits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and models commonly accept this R40 10\" chain?\u003c\/h3\u003e\n\n\u003cp\u003eThese chains are listed to fit a range of popular consumer brands and models that use a .043\" gauge 3\/8\" LP 40DL configuration. They are commonly used on battery and corded electric pruning saws and pole saw attachments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCraftsman models such as select cordless and pole saw part numbers.\u003c\/li\u003e\n  \u003cli\u003eEcho small saw and pruning models compatible with 10\" R40 chains.\u003c\/li\u003e\n  \u003cli\u003eRyobi, Worx, Husqvarna compact models and expand-it pruners.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with certain EGO and other light-duty cordless saws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Fifchall 10\" .043\" gauge 3\/8\"LP R40 40-drive-link chain two-pack is aimed at homeowners, landscapers, and hobby gardeners who need a reliable, low-kickback replacement for pruning and light cutting tools. If you own a compatible electric or battery-powered 10\" saw or pole pruner and want a cost-effective pair of ready-to-install chains that restore cutting performance and are easy to maintain, this product is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 10\" chain fit my saw if my bar is stamped .050\"?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This chain is .043\" gauge; a .050\" gauge bar requires a different, thicker chain for safe fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pack contains two 10\" Fifchall chains of .043\" gauge, 3\/8\" LP pitch, 40 drive links each.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54192929276088,"sku":"B0CYXRG9LJ","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-10-inch-chain.jpg?v=1790554768"},{"product_id":"fifchall-10-s40-chainsaw-chain-3-8-lp-050-gauge-40-drive-links-2-pack-durable-heat-treated-german-steel","title":"Fifchall 10\" S40 Chainsaw Chain 3\/8\" LP .050\" Gauge — 40 Drive Links, 2-Pack Durable Heat-Treated German Steel","description":"\u003cp\u003e\u003cstrong\u003eFifchall 10-inch S40 replacement chains are a 2-pack of 40-drive-link, 3\/8\" low-profile, .050\" gauge saw chains engineered for common 10\" pole saws and compact chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct, affordable replacement chain for light-duty trimming, pruning, or compact saw use, these Fifchall chains are made from heat-treated German steel and delivered in pairs for immediate swap-outs. They fit a wide range of 10\" bars and popular pole saw models from brands such as Remington, Greenworks, Sun Joe, Worx and Craftsman. The chains are manufactured to meet ANSI kickback performance requirements and are meant for everyday homeowner and garden-care tasks where a compact, sharp chain is required.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and bars will this 10\" S40 chain fit?\u003c\/h3\u003e\n\u003cp\u003eThese chains match 10-inch bars with 40 drive links that use a 3\/8\" low-profile pitch and a .050\" gauge. They are designed to replace OEM S40 and equivalent models in many compact and pole saws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with specific models: Sun Joe 20ViON-CS10 series, Greenworks 2000102\/20362\/20062, Remington PS1510A, Echo CS-271\/CS-280 family, and more.\u003c\/li\u003e\n  \u003cli\u003eWorks with brand bars referencing Oregon S40 (9140) spec and similar 10\" replacement bars.\u003c\/li\u003e\n  \u003cli\u003eFits many household and garden brands: Craftsman, Worx, Poulan, Husqvarna-compatible compact models, and other light-duty chainsaws and pole saws.\u003c\/li\u003e\n  \u003cli\u003eAlways verify bar length, pitch, gauge and drive link count before installing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chain perform and how long should I expect it to last?\u003c\/h3\u003e\n\u003cp\u003eConstructed from German-imported steel and deeply quenched for hardness, this chain is built to cut smoothly with resistance to wear. Life expectancy depends on use: routine pruning and trimming will yield longer service life than heavy-duty cutting of hardwoods or frequent full-depth cuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat treatment improves edge retention and reduces breakage risk.\u003c\/li\u003e\n  \u003cli\u003eLow-profile cutters reduce kickback while maintaining efficient slicing action.\u003c\/li\u003e\n  \u003cli\u003eProper lubrication and routine sharpening will significantly extend chain life.\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-pack so you have an immediate spare for uninterrupted work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eInstalling a 10\" S40 chain is straightforward on most compatible bars: align the drive links into the bar groove, route the chain around the sprocket, and set proper tension per your saw manual. Regular care keeps cutting performance high and reduces wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck and set chain tension before each use — snub but still movable by hand.\u003c\/li\u003e\n  \u003cli\u003eUse bar oil for lubrication; keep the oil reservoir topped up during operation.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters when you notice dulling, and inspect for damaged drive links or bent teeth.\u003c\/li\u003e\n  \u003cli\u003eRefer to your saw’s manual for specific torque and sprocket fit guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these chains safe and standards-compliant?\u003c\/h3\u003e\n\u003cp\u003eThe Fifchall 10\" chains are manufactured to meet ANSI kickback performance requirements for low-profile consumer chains. They are intended for use on appropriate low-power, household saws and pole saws; always use recommended protective equipment and follow manufacturer safety rules.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to satisfy consumer-grade kickback performance testing.\u003c\/li\u003e\n  \u003cli\u003eLow-profile design reduces aggressive bite compared with full-profile cutters.\u003c\/li\u003e\n  \u003cli\u003eNot a substitute for professional heavy-duty chains for continuous industrial use.\u003c\/li\u003e\n  \u003cli\u003eFollow all safety and maintenance instructions from your saw’s manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Fifchall 10\" S40 2-pack is ideal for homeowners, gardeners, and property caretakers who use compact chainsaws or pole saws for trimming, pruning, and light branch removal. Buy this set if you want an economical spare chain kit compatible with many 10\" consumer models, delivered ready to install with ANSI-level kickback performance and durable, heat-treated steel construction. If you’re unsure about fit, measure your bar length, pitch, gauge and drive links or contact seller support for 24\/7 help.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 10\" S40 chain fit my Greenworks 20V pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Greenworks model uses a 10\" bar with 3\/8\" LP pitch, .050\" gauge and 40 drive links. Double-check your bar specs to be sure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen these chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen when cutting efficiency drops or you see ragged cuts; for light home use, expect sharpening every few sessions depending on wood type.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54193079910584,"sku":"B0BD161JNM","price":42.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-10-inch-s40.jpg?v=1790558423"},{"product_id":"fifchall-8-inch-pole-saw-chains-4-pack-3-8-lp-050-gauge-33-drive-links-heat-treated-for-long-life","title":"Fifchall 8-Inch Pole Saw Chains 4-Pack — 3\/8\" LP .050 Gauge, 33 Drive Links, Heat-Treated for Long Life","description":"\u003cp\u003e\u003cstrong\u003eFifchall's 4-pack of 8-inch replacement pole saw chains are 3\/8\" low-profile .050\" gauge chains with 33 drive links designed to restore cutting performance for many 8\" pole saw models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement chains from Fifchall are engineered for wear resistance and consistent cutting on small-diameter branches and light pruning tasks. Heat-treated and precision ground, each chain aims to deliver smooth cuts and long service life while meeting ANSI kickback performance expectations. The set of four gives you backup spares so you can swap chains quickly in the field and keep working without repeated trips for parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saw models and part numbers will these chains fit?\u003c\/h3\u003e\n\u003cp\u003eThese 8\" chains are designed to match the common 3\/8\" LP pitch and .050\" gauge with 33 drive links, making them compatible with many corded and cordless pole saws. They’re listed as replacements for several manufacturer part numbers and cover a wide range of household brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Sun Joe SWJ800E, SWJ802E, SWJ806E and iON8PS models.\u003c\/li\u003e\n  \u003cli\u003eFits Greenworks part numbers like 20192, 20302, 20612, 20352, 20672, and 1400102.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Chicago, Portland (e.g., 62896, 63190), Kobalt, Remington RM4050 series, Oregon S33 equivalents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and sharp are these Fifchall replacement chains?\u003c\/h3\u003e\n\u003cp\u003eFifchall chains are heat-treated (deeply quenched) and finished for hardness and wear resistance, which helps maintain sharp cutting edges under typical pruning conditions. The design aims to reduce frequent dulling and minimize kickback risk when used on appropriate tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated cutters for improved edge retention and wear resistance.\u003c\/li\u003e\n  \u003cli\u003ePrecision ground links to ensure smoother cutting and reduced vibration.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet ANSI kickback performance requirements for small chains.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing these chains?\u003c\/h3\u003e\n\u003cp\u003eVerify your pole saw’s bar length, drive link count, pitch, and gauge before purchasing to ensure a correct fit. Also check your owner’s manual for recommended chain specifications and observe proper safety measures when fitting a replacement chain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm bar length is 8 inches and drive link count equals 33.\u003c\/li\u003e\n  \u003cli\u003eEnsure pitch is 3\/8\" LP and gauge is .050\" as stated on your saw manual.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque and tension guidelines during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does Fifchall provide?\u003c\/h3\u003e\n\u003cp\u003eFifchall includes a two-year limited product warranty on this 4-pack of chains and offers customer support for fitment or product questions. If a chain appears defective or incompatible, contact Fifchall customer service for guidance or replacement options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year product warranty included with purchase.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment and installation help.\u003c\/li\u003e\n  \u003cli\u003ePack of four chains provides immediate spares for uninterrupted work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Four-Pack of Fifchall 8\" chains is aimed at homeowners, landscapers, and property caretakers who use small pole saws for pruning, light limb removal, and seasonal maintenance. If you own an 8\" pole saw that specifies 3\/8\" LP pitch, .050\" gauge and 33 drive links, these chains offer a cost-effective replacement and on-hand spares to keep your tool productive between sharpenings or replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my Sun Joe SWJ806E pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — these 8\" chains with 3\/8\" LP pitch, .050\" gauge and 33 drive links are listed compatible with Sun Joe SWJ806E.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many spare chains come in the pack and is there a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You get four replacement chains in the pack, and Fifchall provides a two-year product warranty.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54194175475896,"sku":"B0CMCYG3TX","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging.jpg?v=1790570774"},{"product_id":"fifchall-4-inch-mini-chainsaw-chains-for-stihl-gta-26-4-pack-043-gauge-28dl-heat-treated-pruning-chains","title":"Fifchall 4-inch Mini Chainsaw Chains for Stihl GTA 26 — 4-Pack .043 Gauge 28DL Heat-Treated Pruning Chains","description":"\u003cp\u003e\u003cstrong\u003eFIFCHALL 4-inch replacement chains are a 4-piece set of 1\/4\" pitch, .043 gauge pruning chains designed to fit Stihl GTA 26 and compatible 4\" handheld mini chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep a spare set of sharp chains on hand so your cordless pruner stays ready for garden jobs. This package contains four individually sealed 4-inch chains engineered for small battery-operated and handheld electric saws. Each chain uses a 28 drive link configuration and is supplied ready to install; the guide\/bar is not included.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saw models and part numbers do these chains fit?\u003c\/h3\u003e\n\u003cp\u003eThese chains are manufactured to match common 4-inch mini pruner specifications and replace several Stihl part numbers. Confirm your bar and drive link count before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Stihl GTA 26 pruner and similar 4\" handheld mini chainsaws.\u003c\/li\u003e\n  \u003cli\u003eReplacement references: Stihl 3670 005 0028, 3670 000 0028, 36700000028, 3670-000-0028.\u003c\/li\u003e\n  \u003cli\u003eAlso listed as replacement for model identifiers 71PM328, 71 PM3 28 and compatible 4\" mini saw brands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and sharp are these FIFCHALL chains for pruning work?\u003c\/h3\u003e\n\u003cp\u003eThe chains are heat-treated and deeply quenched to boost hardness and wear resistance, so the cutting edges hold up longer during repeated branch cutting. Tooth geometry emphasizes pointed teeth for faster penetration and reduced snagging on small limbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep quenching process for improved wear resistance and service life.\u003c\/li\u003e\n  \u003cli\u003ePointed, wear-resistant teeth for efficient pruning and carving.\u003c\/li\u003e\n  \u003cli\u003eLightweight design (~1.8 ounces per chain) for minimal added weight to the bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eInstalling the chain is straightforward: loosen the cover screw, remove the old chain, fit the new chain onto the guide and sprocket, then re-tighten. Pay attention to the cutting direction; installing the chain backwards will prevent proper cutting and could damage the tool.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple swap: loosen screw, remove old chain, mount new chain, retighten.\u003c\/li\u003e\n  \u003cli\u003eObserve the chain’s directional arrows or cutter faces toward the bar tip for correct installation.\u003c\/li\u003e\n  \u003cli\u003eEach chain is individually sealed for clean storage and easy inventory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and tasks are these chains suited for?\u003c\/h3\u003e\n\u003cp\u003eWhile optimized for small-diameter wood and garden pruning, these 4\" chains can handle a range of light-duty materials used in DIY and landscaping projects. They are not intended for heavy logging or continuous professional high-load use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for branch cutting, pruning, carving, shaping small wood pieces, and light panel cuts.\u003c\/li\u003e\n  \u003cli\u003eCan cut plywood, laminated flooring, chipboard, plastic, rubber, and ice in light-duty applications.\u003c\/li\u003e\n  \u003cli\u003eBest used with compatible 4\" rechargeable\/cordless mini chainsaw tools for safe, efficient performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Home gardeners, weekend landscapers, and DIYers who use 4-inch cordless pruners and want ready-to-install replacement chains. Order this 4-pack if you need a cost-effective way to keep a small electric pruner running sharp for seasonal trimming, storm cleanup, or light carpentry tasks. Note: guide\/bar is not included—match your saw’s drive link count and pitch before purchase. For any sizing questions, contact FIFCHALL customer support or check your tool’s model and part numbers against the listed references.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these chains fit Stihl GTA 26 pruners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They match Stihl GTA 26 and replace part numbers like 3670 005 0028 and 3670 000 0028; confirm 28 drive links and 1\/4\" pitch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the guide bar and sprocket included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The package contains four replacement chains only; the guide\/bar and sprocket are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54194218926264,"sku":"B09W9KNKQV","price":50.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-4pack.jpg?v=1790571446"},{"product_id":"fifchall-12-inch-pole-saw-chain-1-4-in-lp-043-in-gauge-64-drive-links-two-pack-low-kickback-durability","title":"Fifchall 12-inch pole saw chain 1\/4-in LP .043-in gauge, 64 drive links — two-pack, low-kickback durability","description":"\u003cstrong\u003eFifchall’s 12-inch pole saw chain is a direct-fit replacement chain with 1\/4\" LP pitch, .043\" gauge and 64 drive links designed for safe, smooth trimming and light cutting tasks.\u003c\/strong\u003e\n\n\u003cp\u003eThis two-pack replacement chain is made for 12-inch guide bars and matches the common 1\/4\" low-profile (LP) pitch and .043\" (1.1 mm) gauge specification used by many pole saws and compact chainsaws. Heat-treated links and quenched rivets increase durability and maintain cutting performance, while the low-kickback design helps reduce abrupt reactions on smaller saws. Before purchasing, confirm your tool’s pitch, gauge and drive-link count to ensure correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this chain fits my pole saw or compact saw?\u003c\/h3\u003e\n\u003cp\u003eMeasure three numbers to confirm compatibility: pitch, gauge and the number of drive links. This Fifchall chain is 1\/4\" LP pitch, .043\" gauge and comes with 64 drive links — suitable for 12\" guide bars that use those specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePitch: 1\/4\" LP (low profile)\u003c\/li\u003e\n  \u003cli\u003eGauge: .043\" (1.1 mm) thickness of drive links\u003c\/li\u003e\n  \u003cli\u003eDrive links: 64 for the full loop length\u003c\/li\u003e\n  \u003cli\u003eBar length: intended for 12-inch guide bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich brands and models are compatible with this replacement chain?\u003c\/h3\u003e\n\u003cp\u003eThe chain fits a broad set of compact and pole saw models from popular manufacturers. It is listed as compatible with many Stihl, Homelite, John Deere and Power King small saws and pole attachments; check your model’s manual or stamped numbers on the bar for confirmation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStihl examples: MS 150 T C-E, MSA120 C-B, MSA140 C-B, MSA160 C-B and similar\u003c\/li\u003e\n  \u003cli\u003eHomelite examples: 180 series, 190, 192, 200, XL variants and various Super 2 models\u003c\/li\u003e\n  \u003cli\u003eJohn Deere examples: CS36\/CS40 series, CS40LE, CS40V and related models\u003c\/li\u003e\n  \u003cli\u003ePower King: PK401418, PK4018 and comparable units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features does the chain offer?\u003c\/h3\u003e\n\u003cp\u003eThe Fifchall replacement chain is engineered for steady cutting with reduced kickback and longer wear life. Heat treatment and deep quenching of links and rivets help maintain strength and resist premature failure under normal trimming conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-kickback cutter profile for safer handling on small saws\u003c\/li\u003e\n  \u003cli\u003eHeat-treated links and quenched rivets for stronger joints\u003c\/li\u003e\n  \u003cli\u003eWear-resistant cutter edges to preserve sharpness between sharpenings\u003c\/li\u003e\n  \u003cli\u003eSold as a two-pack so you have a ready spare on hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and maintain this chain?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same basic steps as other 12-inch chains: remove the bar cover, loop the chain on the bar and sprocket, then tension per your saw manufacturer’s instructions. Routine maintenance — correct tensioning, cleaning, lubrication and periodic sharpening — keeps the chain cutting efficiently and extends service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple fit for 12\" guide bars when pitch\/gauge\/links match\u003c\/li\u003e\n  \u003cli\u003eAdjust tension to prevent derailment and reduce wear\u003c\/li\u003e\n  \u003cli\u003eLubricate bar groove and chain during operation\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters or replace as needed for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Fifchall 12-inch pole saw chain suits homeowners, landscapers and arborists using compact chainsaws or pole saw attachments that accept 1\/4\" LP pitch, .043\" gauge chains with 64 drive links. It’s ideal for routine limb trimming, pruning and light-duty cutting where a reliable, low-kickback replacement chain is needed. Verify your tool’s pitch, gauge and drive link count before ordering to ensure proper fit and safe operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my Stihl MSA 140 C-B?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your saw uses a 12\" guide bar with 1\/4\" LP pitch, .043\" gauge and 64 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen this chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen when cutting performance drops or after heavy use; frequent light sharpening preserves cutters longer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54194265653432,"sku":"B0CZZWPV81","price":46.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-chain-12in.jpg?v=1790572583"},{"product_id":"fifchall-6-inch-mini-chainsaw-chain-bar-combo-4-chains-1-bar-heat-treated-replacement-for-6-handheld-saws","title":"Fifchall 6-Inch Mini Chainsaw Chain \u0026 Bar Combo — 4 Chains + 1 Bar, Heat-Treated Replacement for 6\" Handheld Saws","description":"\u003cp\u003e\u003cstrong\u003eFifchall’s [4Chains+1Bar] kit is a replacement set of four 6\" mini chainsaw chains plus one 6\" guide bar, designed to restore or upgrade 6-inch handheld electric chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis combo includes four individually packaged 6-inch chains (37 drive links, 1\/4\" LP pitch, .043\" gauge) and one 6-inch guide bar. The components are heat-treated for wear resistance and shaped for aggressive wood cutting, making them suitable for pruning, trimming, carving and small felling jobs. The set fits many popular 6\" cordless handheld models and can convert some 4\" tools to a 6\" configuration when compatible.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these chains fit my mini chainsaw?\u003c\/h3\u003e\n\u003cp\u003eThe chains are specified at 37 drive links with a 1\/4\" low-profile pitch and a .043\" gauge, matching the common 6\" mini chainsaw standard. They are intended to replace chains on most 6\" handheld electric saws and work with the included 6\" guide bar. Check your saw's manual or measure your current chain's links, pitch, and gauge to confirm compatibility before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e37 drive links — standard for many 6\" bars\u003c\/li\u003e\n  \u003cli\u003e1\/4\" LP pitch and .043\" gauge — common mini chainsaw spec\u003c\/li\u003e\n  \u003cli\u003eFits many branded 6\" cordless handheld models\u003c\/li\u003e\n  \u003cli\u003eIncludes one 6\" guide bar for direct replacement or upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are needed to install the chain and bar?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the side cover, loosen the tensioner, remove the old chain and bar, fit the new bar, loop the chain in the correct direction, then tension and secure the cover. The set is lightweight and sized for easy DIY replacement; just keep a screwdriver or wrench handy. Always ensure the chain rotates freely before powering the saw.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove side cover and old chain\u003c\/li\u003e\n  \u003cli\u003ePlace guide bar and loop chain with cutting teeth facing the correct feed direction\u003c\/li\u003e\n  \u003cli\u003eAdjust tension until slight sag disappears, then tighten cover\u003c\/li\u003e\n  \u003cli\u003eTest rotation by hand before powered use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these chains perform and how long will they last?\u003c\/h3\u003e\n\u003cp\u003eThe chains are heat-treated (deeply quenched) and built with pointed, wear-resistant teeth to deliver smooth, efficient cutting and extended service life compared with untreated links. Performance will vary with wood hardness, user technique, and maintenance such as lubrication and sharpening. Regular cleaning and proper tension prolong chain life and maintain cutting speed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuenched steel links resist wear and keep edges longer\u003c\/li\u003e\n  \u003cli\u003ePointed tooth geometry improves bite and reduces tear-out\u003c\/li\u003e\n  \u003cli\u003eIndividual packaging keeps each spare chain protected\u003c\/li\u003e\n  \u003cli\u003eBest longevity with correct tension, lubrication, and sharpening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials can these chains cut safely?\u003c\/h3\u003e\n\u003cp\u003ePrimarily designed for woodwork tasks—pruning, limb removal, carving, and cutting boards—the chains also handle softer materials like plywood, laminated flooring, and some plastics. They are not made for prolonged cutting of masonry, metal, or heavily contaminated materials that dull the teeth quickly. Use appropriate safety gear and follow the saw manufacturer's material limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal: branches, small logs, pruning, carving wood\u003c\/li\u003e\n  \u003cli\u003eAcceptable: plywood, chipboard, laminated materials, some plastics\u003c\/li\u003e\n  \u003cli\u003eAvoid: metal, masonry, and debris-filled materials\u003c\/li\u003e\n  \u003cli\u003ePro tip: clean and oil after cutting sticky or sap-heavy wood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Fifchall replacement kit is aimed at homeowners, gardeners, and hobby woodworkers who own a compatible 6\" handheld electric chainsaw and need spare chains or a guide bar upgrade. It's also useful for small contractors and landscapers who want compact, easy-to-store replacement chains. If you need fast, repeatable cuts on small-diameter wood and prefer carrying spares for field repairs, this set provides four ready-to-use chains plus a guide bar to keep your mini saw running.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my 6-inch cordless mini chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your saw uses a 6\" bar with 1\/4\" LP pitch and .043\" gauge and accepts 37 drive links, these chains should fit. Verify your current chain specs first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I convert my 4-inch chainsaw to 6 inches with this set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Some 4\" models can accept a 6\" bar and chain if their housing and drive sprocket are compatible; check your saw’s manual for supported bar sizes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54194379227320,"sku":"B0CDKKZ113","price":50.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-6inch-chain-bar-combo.jpg?v=1790574646"},{"product_id":"fifchall-14-chainsaw-chains-4-pack-3-8-lp-050-gauge-52-link-low-kickback-replacement-for-14-inch-saws","title":"Fifchall 14\" Chainsaw Chains 4-Pack — 3\/8\" LP .050\" Gauge, 52-Link Low-Kickback Replacement for 14-inch Saws","description":"\u003cp\u003e\u003cstrong\u003eFifchall 4-pack 14-inch chainsaw chains are replacement low-kickback chains (3\/8\" LP pitch, .050\" gauge, 52 drive links) designed to fit many 14\" chainsaws and pole saws for smoother, safer cutting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement chains are heat-treated, quenched, and manufactured to match common 14-inch specifications so you can swap worn chains quickly and get back to pruning, limbing, or light-duty cutting. The set includes four identical chains built for reduced kickback and longer wear life. Check your saw’s pitch, gauge, and drive link count before ordering to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm these chains will fit my 14-inch saw?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure three key specifications on your current chain: pitch, gauge, and number of drive links. This Fifchall set uses 3\/8\" low-profile (LP) pitch, .050\" gauge, and 52 drive links — matching many 14\" models and pole saws.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePitch: measure between three rivets and divide by two; should read 3\/8\" LP.\u003c\/li\u003e\n  \u003cli\u003eGauge: thickness of the drive link that fits into the guide bar groove; should be .050\".\u003c\/li\u003e\n  \u003cli\u003eDrive links: count links that sit in the bar groove; this set has 52 drive links.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect from these low-kickback chains?\u003c\/h3\u003e\n\n\u003cp\u003eThese chains are engineered to minimize kickback while keeping cutting efficient for general yard work. Heat treatment and quenching strengthen the cutters and rivets to resist wear, allowing smoother cuts over many uses.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLow-kickback cutters reduce rebound risk on common cutting tasks.\u003c\/li\u003e\n  \u003cli\u003eQuenched steel increases hardness and wear resistance for longer service life.\u003c\/li\u003e\n  \u003cli\u003eSmooth cutting geometry helps maintain control and reduce tear-out on limbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance for these replacement chains?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows the same steps as any standard 14\" chain: tension, align on the bar, then secure and re-tension after a brief run-in. These links use heat-treated rivets for stronger joints, and routine sharpening and lubrication keep them working properly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFitment: place chain on bar with drive links seated, loop over sprocket, adjust tension.\u003c\/li\u003e\n  \u003cli\u003eTensioning: tighten until snug, then back off slightly and recheck after a few cuts.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: sharpen cutters as needed and keep bar\/chain oiled for best life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich brands and models are commonly compatible with this 14\" chain?\u003c\/h3\u003e\n\n\u003cp\u003eThe Fifchall chain is compatible with a wide range of consumer and light-professional brands that use 3\/8\" LP, .050\" gauge, 52 drive link chains on 14\" bars. Always confirm your saw’s specifications before purchasing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon compatible brands: Craftsman, Echo, Poulan, Ryobi, Worx, Greenworks, Sun Joe, Makita.\u003c\/li\u003e\n  \u003cli\u003eWorks with many 14\" pole saws and small electric or gas chainsaws using the listed specs.\u003c\/li\u003e\n  \u003cli\u003eNot suitable if your saw requires different pitch, gauge, or drive link counts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Homeowners, landscapers, and property caretakers who perform routine pruning, trimming, and light cutting will find this four-pack convenient and cost-effective. It’s ideal if you want spare chains on hand for extended projects, need a replacement for a widely used 14-inch saw, or prefer low-kickback chains for improved handling. If you’re operating larger professional saws or require specialty teeth profiles, verify compatibility or consult your equipment manual before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my Craftsman 14-inch chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Craftsman uses 3\/8\" LP pitch, .050\" gauge, and 52 drive links, these chains will fit. Verify your saw specs to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I reduce chain kickback when using these replacements?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use correct chain tension, maintain a sharp cutter profile, keep the bar\/chain oiled, and follow safe cutting techniques to minimize kickback.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54195656130744,"sku":"B0CDP3HWBQ","price":56.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-4pack-14-inch-chains.jpg?v=1790584818"},{"product_id":"fifchall-12-inch-chainsaw-chains-4-pack-3-8-lp-050-gauge-45-links-low-kickback-hardened-cutters","title":"Fifchall 12-inch chainsaw chains 4-pack — 3\/8\" LP .050 gauge, 45 links, low-kickback hardened cutters","description":"\u003cb\u003eFifchall 4-pack 12-inch chainsaw chains are low-kickback replacement chains (3\/8\" LP, .050\" gauge, 45 drive links) designed for 12\" pole saws and compact chainsaws.\u003c\/b\u003e\n\n\u003cp\u003eThese replacement chains provide a direct fit for many popular brands and models, offering a hardened cutter profile for smoother, longer-lasting cuts while meeting ANSI low-kickback performance requirements. Sold as a set of four, they let you keep multiple saws or spares ready for yard work, trimming, and light tree pruning without frequent re-sharpening.\u003c\/p\u003e\n\n\u003ch3\u003eWill these chains fit my 12-inch pole saw or compact chainsaw?\u003c\/h3\u003e\n\u003cp\u003eThe Fifchall chains use a 3\/8\" low-profile (LP) pitch with a .050\" gauge and 45 drive links, the common sizing for many 12-inch pole saws and small chainsaws. Confirm your saw’s pitch, gauge and drive link count against your existing chain or owner’s manual before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: 3\/8\" LP pitch, .050\" gauge, 45 drive links.\u003c\/li\u003e\n  \u003cli\u003eFits many pole saws and compact saw models from Craftsman, Greenworks, Poulan, Husqvarna and others.\u003c\/li\u003e\n  \u003cli\u003eCheck part numbers or measure existing chain for exact match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the low‑kickback design affect cutting and safety?\u003c\/h3\u003e\n\u003cp\u003eThese chains are manufactured to meet ANSI low-kickback performance, which reduces the chance of sudden upward motion during a bind or snag. The cutters are hardened and heat-treated to stay sharp and resist wear, delivering more consistent cuts with less rebound.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep quenching for hardened cutters and prolonged edge life.\u003c\/li\u003e\n  \u003cli\u003eSmoother cutting and reduced kickback compared to standard chains.\u003c\/li\u003e\n  \u003cli\u003eLower vibration and improved control for trimming and limbing tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and installation should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstalling these chains follows the same steps as any small chainsaw or pole saw chain: match sprocket alignment, set correct tension, lubricate bar and chain, and verify chain direction. Regular sharpening and proper bar oil will extend performance and service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall with correct chain direction and tension per your saw manual.\u003c\/li\u003e\n  \u003cli\u003eUse bar oil and re-tension after initial few cuts.\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace when cutters show wear; having four chains keeps downtime low.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich brands and models are supported by this replacement pack?\u003c\/h3\u003e\n\u003cp\u003eThe product covers a wide range of consumer-grade pole saws and compact chainsaws. Typical compatibility includes Craftsman models and part numbers, Echo and Sun Joe compact saws, Greenworks 40V pole saws, Poulan and Husqvarna pole saw lines, Kobalt and various other household brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKnown fits: Craftsman (several part numbers), Echo CS-series, Sun Joe SWJ698E.\u003c\/li\u003e\n  \u003cli\u003eGreenworks 40V pole saw replacements and many Poulan\/Husqvarna small saws.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with various Kobalt, Remington, Ryobi and third-party pole saws—confirm sizing first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Homeowners, landscapers, and property managers who use 12\" pole saws or small chainsaws for pruning, trimming and light cutting will find value in this four-pack. It’s designed for people who want easy, low-cost replacements with low-kickback performance—ideal as spare chains for multiple tools or to keep on hand for seasonal yard maintenance. Verify pitch, gauge and drive link count on your existing chain to ensure the right fit before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these chains compatible with my 12\" Husqvarna pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly—these chains are 3\/8\" LP, .050\" gauge with 45 drive links. Confirm your Husqvarna model’s pitch, gauge, and drive link count to ensure fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these chains meet safety standards for kickback reduction?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, these chains are manufactured to meet ANSI low-kickback performance requirements for reduced kickback risk.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54197813805240,"sku":"B0CMD6WK7C","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-12inch-chains.jpg?v=1790588858"},{"product_id":"fifchall-10-s40-chainsaw-chains-4-pack-3-8-lp-050-gauge-40-drive-links-for-10-inch-bars-heat-treated-german-steel","title":"Fifchall 10\" S40 Chainsaw Chains 4-Pack — 3\/8\" LP .050\" Gauge, 40 Drive Links for 10-inch Bars, Heat-Treated German Steel","description":"\u003cp\u003e\u003cstrong\u003eFifchall 4-pack 10-inch S40 chainsaw chains are replacement 3\/8\" low-profile, .050\" gauge, 40-drive-link cutting chains designed for most 10\" bar pole and handheld saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement chains deliver a durable, low-kickback cutting edge made from heat-treated German steel, supplied as a set of four for extended service life and fewer interruptions. They fit many popular pole saws and compact chainsaws from brands like Remington, Greenworks, Sun Joe, Worx, Craftsman and more. Use this set to refresh tired chains, restore cutting performance, or keep a spare ready for frequent pruning and light felling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size and specifications does this chain set include?\u003c\/h3\u003e\n\u003cp\u003eEach pack contains four identical chains sized for 10-inch guide bars. The chains use the S40 (3\/8\" low-profile) pitch, .050\" gauge, and have 40 drive links, matching the standard small-bar dimensions on many consumer saws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePitch: 3\/8\" LP (S40)\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" (1.3 mm)\u003c\/li\u003e\n  \u003cli\u003eDrive links: 40\u003c\/li\u003e\n  \u003cli\u003eOverall chain length: approximately 14.57 inches for a 10\" bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow well do these chains cut and last?\u003c\/h3\u003e\n\u003cp\u003eManufactured from imported German steel and through-hardened, these chains are built for wear resistance and stable cutting performance. The heat treatment improves edge retention and reduces deformation, so chains stay sharper longer under normal pruning and light cutting tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuenched and tempered tooth steel for hardness and durability\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce kickback compared with full-profile cutters\u003c\/li\u003e\n  \u003cli\u003eSmoother cutting with consistent lubrication channels\u003c\/li\u003e\n  \u003cli\u003eSold in a 4-pack to extend service intervals between replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich saws and brands are these chains compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe Fifchall S40 10\" chains fit a broad range of 10\" pole saws and compact chainsaws. Compatibility covers many OEM part numbers and popular consumer brands, but always verify drive link count and gauge against your bar and sprocket before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Sun Joe, Greenworks, Remington, Craftsman, Worx, Echo, Poulan\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with brands like Husqvarna, Black \u0026amp; Decker, Toro, and Troy-Bilt\u003c\/li\u003e\n  \u003cli\u003eWorks with Oregon S40 equivalents and several OEM part numbers\u003c\/li\u003e\n  \u003cli\u003eCheck: 10\" bar length, 40 drive links, 3\/8\" LP pitch, .050\" gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these chains safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard small-bar chain procedures: fit the chain on the bar and sprocket with the cutters oriented forward on the top of the bar, tension to the manufacturer’s specification, and recheck after a short run. Routine maintenance keeps cutting performance high and extends chain life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTension until slight sag disappears, then re-tension after a few cuts\u003c\/li\u003e\n  \u003cli\u003eAlways use bar oil and maintain chain lubrication ports\u003c\/li\u003e\n  \u003cli\u003eSharpen with appropriate round and flat files for 3\/8\" LP cutters\u003c\/li\u003e\n  \u003cli\u003eReplace if teeth are chipped, bent, or wear beyond safe limits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This four-pack is aimed at homeowners, landscapers, and property managers who use 10\" pole saws or compact chainsaws for pruning, limb removal, and light cutting jobs. It's ideal for users who want dependable spare chains on hand, need to replace worn chains in bulk, or maintain multiple saws with the same small-bar specification. If you’re unsure about fitment, compare your saw’s bar length, drive link count (40), pitch (3\/8\" LP), and gauge (.050\") before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my 10\" Greenworks pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Greenworks uses a 10\" bar with 40 drive links, 3\/8\" LP pitch and .050\" gauge, these chains will fit. Confirm your saw’s specs first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace when sharpening no longer restores the cutting edge, teeth are damaged, or performance declines despite proper maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54199128686776,"sku":"B0CMD68KG7","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-10-inch-s40_154ea946-7642-4b3f-8fb9-2845c193aac8.jpg?v=1790592080"},{"product_id":"fifchall-20-inch-chainsaw-chain-325-pitch-058-gauge-76-drive-links-4-pack-full-chisel-german-steel","title":"Fifchall 20-inch Chainsaw Chain .325 Pitch .058 Gauge — 76 Drive Links 4-Pack, Full-Chisel German Steel","description":"\u003cp\u003e\u003cstrong\u003eFifchall 20-inch chainsaw chain: a full-chisel .325\" pitch, .058\" gauge replacement with 76 drive links engineered for smooth, durable cutting on compatible 20\" bars.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement chain from Fifchall is made to fit a wide range of 20\" chainsaw bars and models, offering heat-treated German steel cutters, hardened rivets and corrosion-resistant chrome plating for long wear. It comes as a 4-pack so you can keep spare chains on hand for heavy use, and it is sized to match common OEM part numbers for easy swap-in. Before purchasing, confirm your bar length, pitch, gauge and number of drive links to ensure proper fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I verify this chain fits my saw?\u003c\/h3\u003e\n\u003cp\u003eCheck the guide bar stamping or your chainsaw owner's manual for four key specs: bar length, pitch, gauge and drive link count. The Fifchall chain here is .325\" pitch, .058\" gauge, 76 drive links and made for 20\" bars—matching those numbers is essential for correct installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLocate the stamped numbers on the bar side for pitch and gauge.\u003c\/li\u003e\n  \u003cli\u003eCount drive links along the chain or consult the manual for link count.\u003c\/li\u003e\n  \u003cli\u003eCompare to this chain: 20\" bar, .325\" pitch, .058\" gauge, 76DL.\u003c\/li\u003e\n  \u003cli\u003eContact Fifchall 24×7 support if unsure or send your specs for help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and performance features?\u003c\/h3\u003e\n\u003cp\u003eThis chain uses premium German steel cutters that are heat-treated and equipped with Japanese chrome plating for corrosion resistance and edge retention. The full-chisel tooth profile provides aggressive, fast cutting ideal for experienced users working on clean, green wood.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel cutters for quick, efficient cuts.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated German steel and hardened rivets for durability.\u003c\/li\u003e\n  \u003cli\u003eChrome-plated surfaces resist rust and hold a sharp edge.\u003c\/li\u003e\n  \u003cli\u003eOil storage grooves to help lubrication reach cutting surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain the chain?\u003c\/h3\u003e\n\u003cp\u003eInstall the chain in the correct travel direction—teeth must point forward on the top of the bar—otherwise the saw will not cut. Keep the chain properly tensioned, lubricated, and sharpened when needed to maximize life and maintain safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm directional arrow: cutter teeth point forward on the bar top.\u003c\/li\u003e\n  \u003cli\u003eTension to manufacturer specs; recheck after a few cuts.\u003c\/li\u003e\n  \u003cli\u003eUse bar and chain oil; fill before heavy cutting sessions.\u003c\/li\u003e\n  \u003cli\u003eSharpen or replace when cutters become dull or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Fifchall 20\" chain pack is designed for homeowners, landscapers and professional users who need a ready supply of reliable replacement chains for .325\" pitch, .058\" gauge saws with 76 drive links. It suits operators who want a high-cutting-performance full-chisel profile, durable construction for frequent use, and the convenience of a multi-pack for quick swaps during extended jobs. If you’re unsure about fitment, Fifchall’s support can confirm compatibility based on your bar and saw model before you buy.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 20\" Stihl chain saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Stihl bar is 20\" with .325\" pitch, .058\" gauge and 76 drive links, this chain will fit. Verify the bar stamping or manual first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace these chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace when cutters no longer sharpen well, teeth are damaged, or performance drops; frequency depends on use and wood type.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200005034168,"sku":"B0DYJGGY1F","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-20in-chain.jpg?v=1790604857"},{"product_id":"fifchall-12-inch-chainsaw-bar-and-chains-combo-12-bar-with-3-chains-3-8-lp-050-gauge-45-drive-links-low-kickback","title":"Fifchall 12-Inch Chainsaw Bar and Chains Combo — 12\" Bar with 3 Chains, 3\/8\" LP .050 Gauge, 45 Drive Links, Low-Kickback","description":"\u003cp\u003e\u003cstrong\u003eFifchall's 12-inch bar and three-chain combo is a replacement pole-saw\/chainsaw kit with 3\/8\" low-profile pitch, .050\" gauge, and 45 drive links designed to fit many 12\" saws and pole saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles a 12-inch guide bar with three matching saw chains built to meet ANSI kickback performance requirements and engineered for smoother cuts and extended wear resistance. The set is compatible with a wide range of consumer brands and models — ideal when you need multiple spare chains for back-to-back jobs, seasonal maintenance, or to keep a pole saw ready without repeated sharpening downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saws and pole saw models will these chains and bar fit?\u003c\/h3\u003e\n\u003cp\u003eThe combo is sized to the common 12\" bar standard: 3\/8\" LP pitch, .050\" gauge, 45 drive links. It fits many popular homeowner and light-pro saws and pole saws when those four measurements match your equipment. Always verify your old chain or bar numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Craftsman\/Sears pole saw models listed in manufacturer part numbers.\u003c\/li\u003e\n  \u003cli\u003eFits multiple Echo consumer chainsaw and pole saw series (e.g., CS-2511T\/CS-330T variants).\u003c\/li\u003e\n  \u003cli\u003eAlso cross-fits Husqvarna, Greenworks, Poulan, Sun Joe, Kobalt, Chicago and other brands when specs match.\u003c\/li\u003e\n  \u003cli\u003eContact Fifchall support with your bar length, pitch, gauge and drive links to confirm fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this combo perform during cutting and sharpening cycles?\u003c\/h3\u003e\n\u003cp\u003eThe chains are heat-treated and quenched for higher hardness and improved wear resistance, which helps maintain edge geometry longer between sharpenings. Reduced kickback design and optimized cutter profiles deliver smoother cuts and more predictable handling during pruning and light limb work. Routine sharpening will restore peak performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep quenching process for improved cutter hardness and longer service life.\u003c\/li\u003e\n  \u003cli\u003eLow-kickback tooth geometry to increase operator control on small-diameter limbs.\u003c\/li\u003e\n  \u003cli\u003eChains arrive ready to install; periodic sharpening keeps cutting speed consistent.\u003c\/li\u003e\n  \u003cli\u003eThree spare chains allow rotating fresh chains into use while others are sharpened.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure proper fit and safe use?\u003c\/h3\u003e\n\u003cp\u003eMeasure four key chain dimensions on your existing bar or chain: bar length, pitch, gauge and number of drive links. Mismatching any of these can lead to improper seating, poor lubrication, or unsafe operation. If in doubt, photograph the markings on your bar or chain and send them to Fifchall for confirmation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBar length: confirm actual cutting length in inches (12\" for this kit).\u003c\/li\u003e\n  \u003cli\u003ePitch: must be 3\/8\" low profile for compatibility with this chain set.\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" is the thickness of the drive link notch that sits in the bar groove.\u003c\/li\u003e\n  \u003cli\u003eDrive links: this product uses 45 drive links — count links on your chain to match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Fifchall 12\" bar plus three chains set is best for homeowners, landscapers, and tree-care enthusiasts who use 12-inch pole saws or small chainsaws and want convenient spares to reduce downtime. It suits users who need a budget-friendly replacement option that follows common consumer saw specifications. If you run commercial chainsaws or nonstandard bars, verify specs first or contact Fifchall support for guidance. The package is practical for seasonal pruning, small property maintenance, and keeping multiple machines ready for use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this 12-inch kit fit my Husqvarna pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Husqvarna uses a 12\" bar with 3\/8\" LP pitch, .050\" gauge and 45 drive links, it will fit. Check your bar markings or count drive links to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains are included and are they pre-sharpened?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes three chains plus one 12\" bar. Chains come ready to install but may require a light sharpening for optimal cutting speed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200005198008,"sku":"B0DBHGL49X","price":75.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-12-inch-bar-chains-combo.jpg?v=1790604856"},{"product_id":"fifchall-10-chainsaw-chain-and-guide-bar-kit-3-8-lp-050-gauge-40-links-3-chains-1-bar-for-pole-saws-compact-chainsaws","title":"Fifchall 10\" Chainsaw Chain and Guide Bar Kit – 3\/8\" LP .050\" Gauge, 40 Links (3 Chains + 1 Bar) for Pole Saws \u0026 Compact Chainsaws","description":"\u003cp\u003e\u003cstrong\u003eFifchall's kit includes three 10-inch semi-chisel chains plus one matching 10-inch guide bar designed to replace worn chains and bars on many pole saws and compact chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're trimming high branches with a pole saw or servicing a small gas or battery-powered chainsaw, this Fifchall replacement set supplies the standard 3\/8\" low-profile pitch, .050\" gauge chains with 40 drive links and a compatible 10\" guide bar. The package is built to fit a wide range of popular makes and models — from Remington and Echo to Greenworks and Sun Joe — and aims to make chain replacement quick and predictable for home gardeners and maintenance pros.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this set fits my saw?\u003c\/h3\u003e\n\u003cp\u003eMeasure four key chain dimensions on your current chain or bar: bar length, pitch, gauge and number of drive links. If your saw specifies 10\" bar length, 3\/8\" LP pitch, .050\" gauge and 40 drive links, this Fifchall kit is a match. You can also compare model numbers listed in the compatibility notes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBar length: 10 inches\u003c\/li\u003e\n  \u003cli\u003ePitch: 3\/8\" low profile (LP)\u003c\/li\u003e\n  \u003cli\u003eGauge: .050 inches\u003c\/li\u003e\n  \u003cli\u003eDrive links: 40\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools or skills are required to install these chains and the guide bar?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic hand tools and simple mechanical steps: remove the old bar and chain, mount the new bar, fit the chain, tension correctly and secure the side panel. No advanced training is needed, but follow the saw manufacturer’s safety recommendations and use gloves when handling the chain. Chain tension and lubrication are key to safe operation and long life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic wrench\/screwdriver for side panel and bar nuts\u003c\/li\u003e\n  \u003cli\u003eProtective gloves for safe handling\u003c\/li\u003e\n  \u003cli\u003eProper tensioning and bar oiling after installation\u003c\/li\u003e\n  \u003cli\u003eFollow the chainsaw or pole saw manual for step-by-step guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich brands and models are compatible with this Fifchall set?\u003c\/h3\u003e\n\u003cp\u003eThis 10\" chain and bar kit is engineered to fit a broad list of pole saws and small chainsaws. The product notes include compatibility with Sun Joe, Greenworks, Echo, Remington, Craftsman and various other garden tool models. Check the specific model references to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSun Joe pole saws (20ViON-CS10, SWJ803E, SWJ807E)\u003c\/li\u003e\n  \u003cli\u003eGreenworks 10\" 20V and 24V models (20062, 20362, 20262, 20292)\u003c\/li\u003e\n  \u003cli\u003eEcho (CS-271\/CS-280\/CS-290 series) and Poulan Micro 25\u003c\/li\u003e\n  \u003cli\u003eRemington PS1510A, RM1015PS and compatible Earthwise\/Worx\/Oregon S40\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance will keep these chains and the bar working well?\u003c\/h3\u003e\n\u003cp\u003eRegular sharpening, correct chain tension and routine lubrication are the three most effective maintenance steps. Replace a chain when cutters are repeatedly dull, damaged or stretched beyond safe tensioning, and inspect the guide bar for wear on the rails and sprocket tip. Storing the kit dry and cleaning after use prevents rust and preserves performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen cutters or replace chains when performance declines\u003c\/li\u003e\n  \u003cli\u003eMaintain correct tension and check sprocket nose condition\u003c\/li\u003e\n  \u003cli\u003eUse bar and chain oil during operation\u003c\/li\u003e\n  \u003cli\u003eClean saw debris and store components dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Fifchall 3-chain + 1-bar bundle is ideal for homeowners, landscapers and equipment rental shops that need reliable, ready-to-install 10\" chains and a guide bar for pole saws and compact chainsaws. It suits buyers who prefer stocking spare chains for seasonal trimming, those maintaining multiple compatible brands, and anyone seeking an economical replacement pack to keep small saws running safely and efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my 10-inch Remington pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Remington lists a 10\" bar, 3\/8\" LP pitch, .050\" gauge and 40 drive links, this kit will fit. Confirm those four specs on your old chain or manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains are included and what is the gauge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains three 10\" chains and one guide bar; the chains are .050\" gauge with 40 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200274976952,"sku":"B0D69H28S1","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-3chains-1bar.jpg?v=1790609868"},{"product_id":"fifchall-5-inch-chainsaw-replacement-chain-for-worx-wg324-wg325-fastcraft-2020x-l-2-pack-heat-treated-german-steel","title":"Fifchall 5-inch chainsaw replacement chain for WORX WG324\/WG325 \u0026 FASTCRAFT 2020X-L — 2-Pack heat-treated German steel","description":"\u003cp\u003e\u003cstrong\u003eFifchall 5-inch replacement chains provide a two-pack of hardened German-steel chains designed to fit WORX WG324\/WG324E\/WG325 and FASTCRAFT 2020X-L handheld electric saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap worn cutters quickly and get consistent performance from your 5\" battery-powered pruning saw with these Fifchall chains. Built from quenched German steel, the chains prioritize abrasion resistance and edge retention while matching the pitch and length used by popular compact models such as WORX WG324 series, Sun Joe handheld units, and FASTCRAFT 2020X-L. Included are two chains so you can keep a spare on hand and minimize downtime during yard work or light cutting tasks.\u003c\/p\u003e\n\n\u003ch3\u003eWill these chains fit my WORX WG324 or WG325 pruning saw?\u003c\/h3\u003e\n\n\u003cp\u003eYes — these chains are manufactured to the same 5\" pitch and link count standards used by WORX WG324 and WG325 handheld chainsaws. They are intended to be a direct replacement when your original chain becomes dull or damaged.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits WORX WG324, WG324E and WG325 models that specify a 5\" chain.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Sun Joe 24V-HCS-LTE and similar 5\" battery handheld saws.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for FASTCRAFT 2020X-L and other electric 5\" pruning saws with matching bar\/chain specs.\u003c\/li\u003e\n  \u003cli\u003eIncluded hardware: two chains per package for easy swap-outs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long do these chains hold an edge and resist wear?\u003c\/h3\u003e\n\n\u003cp\u003eThe chains are made from high-toughness German steel and undergo deep quenching, which increases surface hardness and improves wear resistance. Expect improved durability compared with softer, untreated alternatives, especially when used for routine pruning and light limb-cutting tasks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGerman steel construction for greater tensile strength and wear life.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated (deep quenched) cutters for longer edge retention.\u003c\/li\u003e\n  \u003cli\u003ePointed, wear-resistant teeth designed for efficient cutting.\u003c\/li\u003e\n  \u003cli\u003eLow-kickback profile to reduce rebound risk in light-duty applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain a Fifchall 5\" replacement chain?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows the same steps as any 5\" chainsaw chain swap: remove the bar and old chain, fit the new chain onto the sprocket and guide bar, then tension to manufacturer specs. Proper lubrication and correct tension during use are essential to preserve chain life and maintain cutting performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTurn off and remove battery or power source before handling the saw.\u003c\/li\u003e\n  \u003cli\u003eRoute the chain over the sprocket and align with the bar groove before tightening.\u003c\/li\u003e\n  \u003cli\u003eSet recommended tension — not too tight, not too loose — and check frequently.\u003c\/li\u003e\n  \u003cli\u003eKeep the bar nose and chain well-lubricated during operation to reduce wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and after-sale details should I know?\u003c\/h3\u003e\n\n\u003cp\u003eThe chains include a low-kickback profile to lower rebound tendencies in consumer-grade saws, but safe handling and protective gear remain necessary. Fifchall provides two chains per package and offers customer support if the product arrives damaged or you have fitment questions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage contains two 5\" chains for swap-and-spare convenience.\u003c\/li\u003e\n  \u003cli\u003eDesigned to lower kickback risk compared with aggressive cutter profiles.\u003c\/li\u003e\n  \u003cli\u003eContact Fifchall customer service for replacement or fitment guidance.\u003c\/li\u003e\n  \u003cli\u003eAlways wear eye, hand, and hearing protection while cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Fifchall 5\" replacement chains are intended for homeowners, gardeners, and landscapers who use compact battery-powered pruning saws (like WORX WG324\/WG325, Sun Joe 24V models, or FASTCRAFT 2020X-L) and want a durable, ready-to-install spare. They suit light to medium pruning, trimming, and small-limb cutting tasks where quick chain changes and longer edge life are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these chains fit WORX WG324E and WG325 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These Fifchall chains are made to the 5\" specifications used by WG324, WG324E and WG325 handheld saws.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains come in the package and is there warranty support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes two 5\" chains, and Fifchall offers customer support for fitment questions or issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200289067192,"sku":"B0D9RX3S5X","price":69.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-5-inch-chains.jpg?v=1790610072"},{"product_id":"fifchall-14-inch-chainsaw-guide-bar-and-chain-kit-3-8-lp-050-gauge-with-3-heat-treated-chains","title":"Fifchall 14-inch chainsaw guide bar and chain kit — 3\/8\" LP, .050\" gauge with 3 heat-treated chains","description":"\u003cp\u003e\u003cstrong\u003eFifchall's 14-inch replacement guide bar plus three matching 3\/8\" low-profile (.050\" gauge, 52 drive links) chains provide a drop-in option to restore cutting performance on most 14\" chainsaws and pole saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're replacing a worn chain or keeping a spare set for busy seasons, this kit includes a hardened guide bar and three heat-treated chains built to ANSI kickback performance guidelines. The design targets a wide range of consumer brands and models, delivering straightforward fitment for many electric and gas 14\" saws. Below you'll find clear fitment tips, installation notes, and use recommendations so you can confirm compatibility and get back to work quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this 14\" bar and chains will fit my saw?\u003c\/h3\u003e\n\u003cp\u003eMatch four key measurements on your current bar or chain: pitch, gauge, number of drive links, and overall bar length. The Fifchall kit uses a 3\/8\" low-profile pitch, .050\" gauge, and 52 drive links for a 14-inch bar—confirm these against your saw’s manual or the old chain markings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the chain stamp for \"3\/8\" LP\" and \".050\"\"\u003c\/li\u003e\n  \u003cli\u003eCount drive links on the old chain or measure bar length tip-to-tip (14\")\u003c\/li\u003e\n  \u003cli\u003eCompare your saw model list (Craftsman, Echo, Poulan, Ryobi, etc.)\u003c\/li\u003e\n  \u003cli\u003eIf uncertain, provide your saw model number for compatibility help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these chains durable and safer for everyday use?\u003c\/h3\u003e\n\u003cp\u003eEach chain in the set is heat-treated and quenched to harden the rivets and cutters, improving wear resistance and joint strength. The chains were made to meet common kickback performance expectations for consumer saws, and the low-profile pitch provides smoother cutting with many modern small-engine and electric saw designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated cutters and rivets for stronger link connections\u003c\/li\u003e\n  \u003cli\u003e3\/8\" LP design reduces vibration for controlled cutting\u003c\/li\u003e\n  \u003cli\u003e.050\" gauge balances stiffness and compatibility with many bars\u003c\/li\u003e\n  \u003cli\u003eSold as three chains to keep spares on hand for long jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same steps as most chainsaw replacements: remove the side cover, release tension, fit the chain on the sprocket and bar, then retension and lubricate. Routine maintenance is simple—keep the chain sharp, maintain correct tension, and ensure the bar oil reservoir is filled for longer life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard clutch sprockets and tension systems for many 14\" saws\u003c\/li\u003e\n  \u003cli\u003eTension after initial break-in and recheck before each use\u003c\/li\u003e\n  \u003cli\u003eFile or sharpen cutters as they dull; replace when worn\u003c\/li\u003e\n  \u003cli\u003eUse bar oil and clean the guide groove regularly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and brands commonly accept this replacement kit?\u003c\/h3\u003e\n\u003cp\u003eThe Fifchall 14\" bar and 3\/8\" LP, .050\", 52-link chains are compatible with a broad set of consumer chainsaw and pole saw models. Popular matches include various Craftsman, Echo, Poulan, Ryobi, Makita and Sun Joe machines, especially those marketed with 14\" cutting bars.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon Craftsman models such as S145-series\u003c\/li\u003e\n  \u003cli\u003eEcho consumer chains and pole saws listed with 14\" bars\u003c\/li\u003e\n  \u003cli\u003eRyobi, Poulan, Makita, Sun Joe and many electric models\u003c\/li\u003e\n  \u003cli\u003eAlways verify model specifics or consult Fifchall support if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Fifchall 14-inch guide bar with three replacement chains is aimed at homeowners, landscapers, and property managers who need an affordable, ready-to-install spare set for routine trimming and cutting tasks. It's best for users with saws that accept a 3\/8\" low-profile chain, .050\" gauge and 52 drive links who want durable, heat-treated chains plus an extra bar for longer projects or quick on-site replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 14\" kit fit my Ryobi RY3714?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your saw specifies 14\" bar, 3\/8\" LP pitch, .050\" gauge and 52 drive links, it will fit. Check your manual or the old chain markings to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I sharpen these chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen when cutting slows or produces fine sawdust; frequency depends on use, typically every few hours of heavy cutting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200405328056,"sku":"B0CYT5QVGH","price":81.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-14in-guide-bar-front-packaging.jpg?v=1790612662"},{"product_id":"fifchall-16-inch-chainsaw-chain-325-pitch-050-gauge-66-drive-links-4-pack-heat-treated-chrome","title":"Fifchall 16-inch Chainsaw Chain .325\" Pitch .050\" Gauge 66 Drive Links — 4-Pack, Heat‑Treated Chrome","description":"\u003cp\u003e\u003cstrong\u003eFifchall 4-pack 16-inch replacement chains designed for .325\" pitch, .050\" gauge guide bars with 66 drive links — compatible with many Husqvarna and popular saw models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Fifchall chains are engineered as a direct-replacement option for 16\" guide bars that require .325\" pitch and .050\" gauge chains with 66 drive links. Built from heat-treated German-style steel and finished with corrosion-resistant plating, the set offers a balance of cutting performance and durability. The pack contains four identical chains so you can keep spares on hand for heavy use, seasonal work, or to fit multiple saws.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saw models will these chains fit?\u003c\/h3\u003e\n\u003cp\u003eThese chains match guide bars that use .325\" pitch, .050\" gauge and exactly 66 drive links. They’re commonly compatible with a broad range of Husqvarna, Echo, Jonsered, Makita, Poulan, Ryobi, McCulloch and Homelite models when those bar specifications are met.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Husqvarna: 435, 430, 136, 137, 141, 142, 261, 362 XP and others listed.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Echo, Jonsered, Poulan, McCulloch, Ryobi and many Makita and Homelite saws.\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by matching bar length, pitch, gauge and drive links on your guide bar stamp.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these chains perform and what are their features?\u003c\/h3\u003e\n\u003cp\u003eFifchall chains are manufactured with heat-treated cutters and hardened rivets to maintain edge life and resist wear. The semi-chisel, low-kickback profile balances cutting speed with user control for general-purpose cutting, pruning and firewood tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium heat-treated steel and chrome plating to resist corrosion.\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel cutters for smooth, consistent slices through soft and medium hardwoods.\u003c\/li\u003e\n  \u003cli\u003eHardened rivets and oil-storage grooves to support longer service intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure proper fit?\u003c\/h3\u003e\n\u003cp\u003eBefore installing, verify four key measurements stamped on your guide bar or listed in the owner’s manual. If you’re unsure, remove the old chain and compare pitch, gauge and drive link count or contact support with your saw\/bar details.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure bar length (16\" required for this listing).\u003c\/li\u003e\n  \u003cli\u003eConfirm chain pitch is .325\" and gauge is .050\".\u003c\/li\u003e\n  \u003cli\u003eVerify the chain has 66 drive links to match the sprocket and bar nose.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain these chains for longer life and safe use?\u003c\/h3\u003e\n\u003cp\u003eRegular sharpening, correct tensioning and proper lubrication extend chain life and keep cutting performance consistent. Inspect cutters and rivets before each use and replace chains in sets when wear or damage appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen cutters or take to a pro when dull; follow manufacturer angles.\u003c\/li\u003e\n  \u003cli\u003eKeep correct chain tension — not too tight, not too loose — and lubricate the bar groove.\u003c\/li\u003e\n  \u003cli\u003eStore spare chains dry and lightly oiled to prevent rust before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 4-pack is ideal for homeowners, landscapers and pros who use 16\" chainsaw bars with .325\" pitch and .050\" gauge and want dependable spares or replacements. It suits anyone who maintains multiple saws, works through extended projects without delays, or prefers buying replacement chains in bulk for convenience and cost-efficiency. If you need a different size, check Fifchall’s range or contact support with your bar specifications for help picking the correct chain.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my Husqvarna 435 with a 16\" bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your 435 uses .325\" pitch, .050\" gauge and 66 drive links. Confirm the markings on the guide bar.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains are included and can I use them interchangeably?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This purchase includes four identical 16\" chains; they can be used on any compatible bar meeting the same specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200405754040,"sku":"B0FB3Q3GCQ","price":73.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-4-pack.jpg?v=1790612686"},{"product_id":"fifchall-16-inch-chainsaw-chain-5-pack-3-8-inch-low-profile-043-gauge-55-drive-links-heat-treated-steel","title":"Fifchall 16-Inch Chainsaw Chain 5-Pack — 3\/8-inch Low-Profile, .043\" Gauge, 55 Drive Links, Heat-Treated Steel","description":"\u003cp\u003e\u003cstrong\u003eFifchall 5-pack 16-inch replacement chains designed for 3\/8\" low-profile guide bars (55 drive links) that deliver durable, low-kickback cutting for compatible Stihl and Oregon chainsaw models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Fifchall chains are engineered as direct-fit replacements for many popular 16\" saws that use a 3\/8\" low-profile pitch and .043\" gauge with 55 drive links. Built from heat-treated German steel with chrome-plated cutters and hardened rivets, the set aims to combine long wear life and smoother cutting while matching the specifications stamped on your guide bar or listed in the owner’s manual. Check compatibility carefully—some bars accept either .043\" or .050\" gauge chains and some models require a low-profile sprocket.\u003c\/p\u003e\n\n\u003ch3\u003eWhich chainsaw models will these chains fit?\u003c\/h3\u003e\n\u003cp\u003eThese chains are intended for 16\" bars with a 3\/8\" low-profile (LP) pitch, .043\" gauge, and 55 drive links. They are commonly compatible with numerous Stihl models and many Oregon-equipped saws when the bar and sprocket specifications match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStihl examples: MS170, MS171, MS180 C, MS180 C-B, MS180 C-BE, MS180 G, 017, 018, 019, E 140.\u003c\/li\u003e\n  \u003cli\u003eOther fits: MSE140, MS191T, MS192 series (verify low-profile sprocket), and Oregon part R55\/90PX055G equivalents.\u003c\/li\u003e\n  \u003cli\u003eAlways confirm bar length, pitch, gauge, and drive-link count against your guide bar stamp or owner’s manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these chains perform compared with OEM chains?\u003c\/h3\u003e\n\u003cp\u003eFifchall chains use heat-treated German steel and semi-chisel cutters with chrome plating for corrosion resistance and consistent cutting action. They emphasize a balance of durability and lower kickback rather than ultra-aggressive ripping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi-chisel cutters for stable cutting performance and easier maintenance.\u003c\/li\u003e\n  \u003cli\u003eHardened rivets and precision heat treatment to resist stretching and wear.\u003c\/li\u003e\n  \u003cli\u003eOil storage grooves to help maintain lubrication and reduce corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing these chains?\u003c\/h3\u003e\n\u003cp\u003eConfirm the chain’s pitch (3\/8\" LP), gauge (.043\"), and drive-link count (55) match your saw’s guide bar and sprocket. Also verify your saw uses a low-profile sprocket if applicable; some models accept multiple gauges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect the guide bar side stamp or owner’s manual for pitch, gauge, and drive links.\u003c\/li\u003e\n  \u003cli\u003eNote that some bars accept .043\" or .050\" gauge—measure to be certain before ordering.\u003c\/li\u003e\n  \u003cli\u003eDuring installation, ensure chain orientation is correct; an incorrectly threaded chain will not cut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat after-sales support and guarantees come with the purchase?\u003c\/h3\u003e\n\u003cp\u003eFifchall offers customer support and a 45-day refund guarantee to address fitment or performance concerns. Their support can help verify measurements or guide installation steps if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24\/7 customer service available for fitment questions and troubleshooting.\u003c\/li\u003e\n  \u003cli\u003e45-day refund policy if the product does not meet expectations or fit correctly.\u003c\/li\u003e\n  \u003cli\u003eInstallation reminders included—pay attention to chain direction and tension for safe operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 5-pack is a practical choice for homeowners, landscapers, and small-scale pros who own 16\" chainsaws that require a 3\/8\" low-profile, .043\" gauge chain with 55 drive links and want a cost-effective supply of replacement chains. Choose these if you need reasonably long-lasting chains with corrosion resistance and easier maintenance over frequent, inexpensive swaps—just verify fitment specifics before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my Stihl MS170?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your MS170 uses a 16\" bar with 3\/8\" LP pitch, .043\" gauge, and 55 drive links—confirm the bar stamp first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these chains on a bar that accepts .050\" gauge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No; these are .043\" gauge. Only use if your bar or sprocket supports .043\" or explicitly lists compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200406343864,"sku":"B0FB3Q8CHC","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-16inch-chains.jpg?v=1790612707"},{"product_id":"fifchall-10-inch-pole-saw-chains-5-pack-1-4-in-pitch-043-in-gauge-56-link-hardened-german-steel-low-kickback","title":"Fifchall 10-inch Pole Saw Chains 5-Pack 1\/4 in Pitch .043 in Gauge 56-Link — Hardened German Steel, Low-Kickback","description":"\u003cp\u003e\u003cstrong\u003eFifchall's 5-pack 10-inch pole saw chains are replacement 1\/4\"-pitch, .043\"-gauge chains with 56 drive links engineered to fit many Stihl pole saw models and similar 10\" guide bars.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese chains are built from hardened German steel with chrome-plated surfaces and oil-storage grooves to increase wear resistance and resist corrosion during active outdoor use. Supplied as a set of five identical chains, they are intended for homeowners and pros who need frequent replacements for trimming and pruning tasks using 10\" guide bars. Before ordering, confirm your guide bar length, pitch, gauge and number of drive links to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these chains will fit my pole saw?\u003c\/h3\u003e\n\u003cp\u003eConfirming fit requires matching four key measurements stamped on your guide bar or listed in your owner's manual: bar length, chain pitch, chain gauge and drive link count. This Fifchall pack is specifically 10\" bar length, 1\/4\" (0.25\") pitch, .043\" (1.1 mm) gauge and 56 drive links—verify all four dimensions before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10\" guide bar length\u003c\/li\u003e\n  \u003cli\u003e1\/4\" (0.25\") chain pitch\u003c\/li\u003e\n  \u003cli\u003e.043\" (1.1 mm) chain gauge\u003c\/li\u003e\n  \u003cli\u003e56 drive links in the chain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing features improve durability?\u003c\/h3\u003e\n\u003cp\u003eFifchall chains use German steel for core strength and undergo rivet hardening and quenching to reduce wear at pivot points. A chrome-plated finish and integrated oil-storage grooves help the chain resist corrosion and maintain lubrication under load, extending service life when properly maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened, quenched rivets for improved joint strength\u003c\/li\u003e\n  \u003cli\u003eChrome plating to limit surface corrosion\u003c\/li\u003e\n  \u003cli\u003eOil-storage grooves for better lubrication retention\u003c\/li\u003e\n  \u003cli\u003ePrecision flatness control for consistent cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this chain perform when pruning or trimming on a pole saw?\u003c\/h3\u003e\n\u003cp\u003eThe low-kickback cutting profile and wear-resistant construction provide smooth, controlled cuts on branches and limbs when used with a compatible 10\" guide bar. These chains are optimized for frequent replacement cycles, balancing cutting speed with user safety and long-term durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-kickback design reduces sudden reaction forces\u003c\/li\u003e\n  \u003cli\u003eWear-resistant cutters for consistent performance\u003c\/li\u003e\n  \u003cli\u003eSuitable for light-to-moderate pruning and trimming tasks\u003c\/li\u003e\n  \u003cli\u003eSold in a 5-pack for quick swaps in the field\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance keeps the chain working best?\u003c\/h3\u003e\n\u003cp\u003eRoutine sharpening, correct tensioning and regular lubrication greatly extend chain life and keep cuts efficient. After each use, clean debris from the chain and bar, check drive link engagement, and re-tension when the chain cools to avoid over-tightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharpen cutters as needed with the correct file size\u003c\/li\u003e\n  \u003cli\u003eKeep chain tensioned according to your saw manual\u003c\/li\u003e\n  \u003cli\u003eUse bar and chain oil to maintain lubrication\u003c\/li\u003e\n  \u003cli\u003eInspect rivets and replace chain at signs of excessive wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This five-pack is ideal for landscapers, tree-care professionals and active homeowners who use 10\" pole saws (including compatible Stihl models like MSA 120 C-B and others) and require multiple replacements for frequent pruning work. If you manage a fleet of tools or prefer keeping spare chains on hand to avoid downtime, this set delivers value, compatibility and materials designed for outdoor cutting tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit a Stihl MSA 120 C-B pole saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your bar is 10 inches, the chain pitch is 1\/4\", gauge .043\", and it requires 56 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace a pole saw chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace when cutters dull beyond sharpening, rivets wear, or performance drops; frequent users may replace more often.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200406212792,"sku":"B0FCS54RK3","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-5-pack-chains.jpg?v=1790612707"},{"product_id":"fifchall-12-chainsaw-chain-1-4lp-043-gauge-64-link-4-pack-low-kickback-heat-treated-for-stihl-msa120-msa140","title":"Fifchall 12\" Chainsaw Chain 1\/4\"LP .043\" Gauge 64-Link 4-Pack – Low-Kickback, Heat-Treated for Stihl MSA120\/MSA140","description":"\u003cp\u003e\u003cstrong\u003eFifchall's 4-pack of 12-inch chainsaw chains are replacement 1\/4\"LP pitch, .043\" gauge chains with 64 drive links designed to fit select Stihl pole saws and compact chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese chains are built for compact electric and battery-powered saws that use a 12\" guide bar and the 1\/4\" LP pitch standard. Heat-treated rivets and quenched steel construction improve durability and wear resistance while aiming for smoother cuts and reduced kickback on small trees, pruning jobs and light milling. Before ordering, confirm your saw's bar length, pitch, gauge and number of drive links to ensure proper fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my Stihl MSA120 or MSA140 pole saw?\u003c\/h3\u003e\n\n\u003cp\u003eYes, this chain is made to fit many Stihl models that accept a 12\" guide bar and use 1\/4\"LP pitch with a .043\" (1.1 mm) gauge and 64 drive links. Fitment depends on your exact bar and sprocket combination, so check your owner's manual or the existing chain markings to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible examples: Stihl MSA120 C-B, MSA140 C-B, MS 150 T C-E, HT103.\u003c\/li\u003e\n  \u003cli\u003eRequired specifications: 12\" bar length, 1\/4\"LP pitch, .043\" gauge, 64 drive links.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with saws needing different pitch, gauge or link count.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Fifchall chain perform on pruning and light cutting tasks?\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for small-bar saws, this chain prioritizes low kickback and smooth, controlled cutting suitable for pruning, limb trimming and occasional firewood splitting. The hardness treatment increases edge life and reduces frequent sharpening during routine garden work.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLow-kickback cutters help safer operation on overhead cuts and close-quarter jobs.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated rivets strengthen link connections for longer service life.\u003c\/li\u003e\n  \u003cli\u003eQuenched finish improves lubrication flow and consistent cutting performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and maintenance points I should know?\u003c\/h3\u003e\n\n\u003cp\u003eInstalling the chain is straightforward for anyone familiar with small chainsaws: align drive links on the bar groove, fit around the drive sprocket, tension correctly and lubricate. Regular tension checks, sharpness inspections and proper bar lubrication will maximize life and maintain cutting efficiency.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAlways fit the chain with the cutters facing forward on the top of the bar.\u003c\/li\u003e\n  \u003cli\u003eTension to the manufacturer's specification—no sagging, but not over-tightened.\u003c\/li\u003e\n  \u003cli\u003eKeep the chain oiled and sharpen or replace when cutters dull or chip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack is aimed at homeowners, landscapers and arborists who use compact electric or battery Stihl saws for pruning, small-fall work and property maintenance. It's a cost-effective option for those who want spare chains on hand for repetitive tasks or multiple machines, provided the saw accepts a 12\" bar with 1\/4\"LP pitch, .043\" gauge and 64 drive links.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this chain fit all 12\" Stihl chainsaws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Stihl models that require 12\" guide bars with 1\/4\"LP pitch, .043\" gauge and 64 drive links; check your saw's specifications first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace or sharpen these chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sharpen when cutting becomes slow or uneven; replace if cutters are chipped, stretched or damaged beyond safe repair.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54200406311096,"sku":"B0D7M99QJ5","price":69.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-12inch-chain.jpg?v=1790612705"},{"product_id":"fifchall-20-inch-chainsaw-chain-325-pitch-050-gauge-4-pack-hardened-german-steel-chrome-plated","title":"Fifchall 20-inch Chainsaw Chain .325 pitch .050 gauge 4-Pack — Hardened German Steel, Chrome-Plated","description":"\u003cp\u003e\u003cstrong\u003eThese are four replacement 20-inch chainsaw chains by Fifchall, .325\" pitch, .050\" gauge, with 78 drive links designed to fit many Craftsman, Echo, Husqvarna, Milwaukee and other chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need reliable replacement chains that restore cutting power quickly, these Fifchall chains are engineered for durability and smooth cutting. Made from hardened German steel with chrome-plated finish and oil-storage grooves, the set includes four identical chains sized to match a 20\" guide bar with .325\" pitch and .050\" gauge. The pack is aimed at homeowners, prosumers and light-professional users who want an economical supply of ready-to-install chains for common 20\" bar models.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these chains improve cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe cutters are sharpened and heat-treated to produce consistent, efficient cuts and to hold an edge longer between resharpenings. Hardened rivets and a flat, precise link geometry reduce vibration and maintain alignment during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharp, factory-ground cutters for immediate cutting power\u003c\/li\u003e\n  \u003cli\u003eHardened, quenched rivets resist wear and reduce failure risk\u003c\/li\u003e\n  \u003cli\u003eFlatness tolerance for smoother chain travel and less kickback tendency\u003c\/li\u003e\n  \u003cli\u003eChrome-plated finish and oil grooves help corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich saws and bars are these chains compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis 20\" .325\" .050\" 78-drive-link chain fits a wide range of popular saw models and OEM part numbers. Always confirm your guide bar length, pitch, gauge and drive link count—stamps on the bar or your owner’s manual list those details.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Craftsman part numbers and multiple Echo CS series models\u003c\/li\u003e\n  \u003cli\u003eFits many Husqvarna models including 133, 142, 455 series and more\u003c\/li\u003e\n  \u003cli\u003eWorks with select Milwaukee M18 FUEL and other consumer brands\u003c\/li\u003e\n  \u003cli\u003eCheck that your bar reads 20\" (or 20\" effective) and lists .325\" pitch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing features extend chain life?\u003c\/h3\u003e\n\u003cp\u003eFifchall chains use premium German steel and specialized plating to balance toughness and wear resistance. Manufacturing steps such as rivet hardening and chrome plating, together with oil-retaining grooves, help the chain resist corrosion and tolerate heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGerman-engineered steel for improved toughness and flatness\u003c\/li\u003e\n  \u003cli\u003eQuenched, hardened rivets to reduce elongation and wear\u003c\/li\u003e\n  \u003cli\u003eJapanese chrome-plating process for surface corrosion protection\u003c\/li\u003e\n  \u003cli\u003eOil storage grooves maintain lubrication on the bar and links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I confirm fit before buying?\u003c\/h3\u003e\n\u003cp\u003eVerify four key specs on your guide bar or in the manual: bar length, pitch, gauge and drive link count. If you’re unsure, you can measure the bar and count links or contact Fifchall support with your chainsaw model and bar stamping for assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRead the guide bar side stamp for pitch and gauge information\u003c\/li\u003e\n  \u003cli\u003eCount drive links on the old chain to confirm it is 78 links\u003c\/li\u003e\n  \u003cli\u003eCompare the bar length to 20\" (effective cutting length) before ordering\u003c\/li\u003e\n  \u003cli\u003eFifchall offers 24\/7 after-sales support for sizing questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack is ideal for homeowners who maintain multiple saws, small crews that need spare chains on hand, and anyone who wants an economical supply of ready-to-install 20\" chains. It serves users of many consumer and prosumer chainsaw brands who require .325\" pitch and .050\" gauge with 78 drive links and value chains made for durability and consistent cutting performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this chain fit my 20-inch Craftsman chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your guide bar is 20\" and the bar stamp shows .325\" pitch, .050\" gauge and 78 drive links, this chain will fit. Confirm bar stamp or manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains are included and what are they made of?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This pack contains four chains made from premium German steel with hardened rivets and chrome plating for corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54204148744376,"sku":"B0FBG96P5L","price":96.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-20in-chains.jpg?v=1790624966"},{"product_id":"fifchall-20-inch-chainsaw-chains-4-pack-3-8-pitch-050-gauge-72-drive-links-full-chisel-cutters","title":"Fifchall 20-Inch Chainsaw Chains 4-Pack — 3\/8\" Pitch .050 Gauge, 72 Drive Links, Full-Chisel Cutters","description":"\u003cp\u003e\u003cstrong\u003eFifchall 4-pack 20-inch chainsaw chains are replacement full-chisel chains (3\/8\" pitch, .050\" gauge, 72 drive links) designed to fit many Husqvarna, Stihl and Poulan saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement chains are built for homeowners and landscapers who need a reliable, ready-to-install set of 20\" chains to restore cutting performance without buying a new bar or saw. Made from hardened components with chrome-plated cutters and oil-storage grooves, the pack includes four identical chains so you can keep a spare on hand for prolonged jobs or seasonal work.\u003c\/p\u003e\n\n\u003ch3\u003eWill these chains fit my chainsaw?\u003c\/h3\u003e\n\u003cp\u003eCheck four measurements on your current chain or bar: bar length, pitch, gauge and number of drive links. This Fifchall set matches a 20 inch bar (51 cm), 3\/8\" pitch, .050\" (1.3 mm) gauge and 72 drive links—commonly used on many Husqvarna, Stihl and Poulan models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Husqvarna models like 455 Rancher and 460 Rancher\u003c\/li\u003e\n  \u003cli\u003eCompatible with Stihl saws including MS311 and MS391 series\u003c\/li\u003e\n  \u003cli\u003eFits Poulan PR5020 and other 20\" bar tools using 72 drive links\u003c\/li\u003e\n  \u003cli\u003eIf unsure, compare your old chain markings or send specs to Fifchall support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these chains perform during cutting tasks?\u003c\/h3\u003e\n\u003cp\u003eThe full-chisel cutters and hardened rivets deliver a sharp, aggressive bite for fast, consistent cuts in limb and firewood work. Chrome plating and oil-storage grooves help maintain edge life and resist corrosion when chains are properly lubricated and maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel teeth for faster cutting and reduced clogging on clean wood\u003c\/li\u003e\n  \u003cli\u003eHardened rivets for longer joint life under load\u003c\/li\u003e\n  \u003cli\u003eOil-storage grooves help keep cutters lubricated between chainsaw oil passages\u003c\/li\u003e\n  \u003cli\u003eLower vibration design reduces operator fatigue over extended jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain a Fifchall replacement chain?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard chainsaw procedures: remove tension, loop the chain over the bar and sprocket, then retension per the saw manufacturer’s guidance. Regular sharpening, correct tension, and consistent bar oiling keep cutting performance steady and extend chain life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways follow your saw manual for tensioning and sprocket alignment\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters when you notice slower cutting or uneven chips\u003c\/li\u003e\n  \u003cli\u003eKeep bar and chain properly oiled before and during use\u003c\/li\u003e\n  \u003cli\u003eInspect rivets and drive links for wear; replace if damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Fifchall’s 4-pack of 20\" chains is aimed at homeowners, small acreage owners, arborists and landscapers who use medium-displacement chainsaws and want a cost-effective way to keep multiple chains ready. If you run a Husqvarna 455\/460 series, many Stihl MS300–MS400 models, or similar saws that require a 3\/8\" pitch, .050\" gauge, 72-drive-link chain, this set gives you spares for longer jobs, seasonal rotation, or quick swaps in the field. For precise fitment, compare your chain markings or contact Fifchall support with bar length, pitch, gauge and drive-link count before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these chains fit a Husqvarna 455 Rancher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Fifchall set fits Husqvarna 455 Rancher when your chain is 20\" long, 3\/8\" pitch, .050\" gauge with 72 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these chains on a Stihl MS311?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your MS311 uses a 20\" bar with 3\/8\" pitch, .050\" gauge and 72 drive links, these chains are compatible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54204497232056,"sku":"B0D2C73QD6","price":85.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-4chains.jpg?v=1790631793"},{"product_id":"fifchall-16-inch-chainsaw-bar-and-3-chain-combo-050-gauge-3-8-pitch-56-drive-links","title":"Fifchall 16-Inch Chainsaw Bar and 3-Chain Combo — .050 gauge, 3\/8\" pitch, 56-drive links","description":"\u003cp\u003e\u003cstrong\u003eFifchall’s 16-inch bar and three-chain combo provides a ready-to-install replacement set for 16\" chainsaws using .050\" gauge, 3\/8\" pitch, and 56 drive links.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your saw needs a fresh bar and chain set that fits popular homeowner and light-pro chainsaws, this Fifchall kit supplies one 16\" bar plus three matching 16-inch chains. Designed to suit a wide range of models from brands such as Craftsman, Echo, Poulan, Husqvarna-compatible machines and many pole saws, the set emphasizes correct sizing and multiple spare chains so you can swap quickly and keep working.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm these chains fit my saw?\u003c\/h3\u003e\n\u003cp\u003eMeasure four things on your current setup: the bar length, chain pitch, chain gauge, and number of drive links. The Fifchall kit is built to .050\" gauge, 3\/8\" pitch with 56 drive links for a 16\" bar—match those values to be certain of compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the stamped bar length or measure from tip to where the bar enters the saw housing.\u003c\/li\u003e\n  \u003cli\u003eVerify chain pitch (3\/8\" LP in this kit) and gauge (.050\").\u003c\/li\u003e\n  \u003cli\u003eCount the drive links on your existing chain; this kit has 56 drive links.\u003c\/li\u003e\n  \u003cli\u003eContact Fifchall support if you're unsure; provide your saw model and bar part number.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these chains work with my brand (Craftsman, Echo, Poulan, etc.)?\u003c\/h3\u003e\n\u003cp\u003eThe combo is compatible with many common consumer saw models when the size specs match. Manufacturers often use the same pitch, gauge and link counts across different models, so matching those specs matters more than brand alone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with various Craftsman model numbers and Echo CS series where 16\"\/3\/8\" LP\/.050\"\/56 fits.\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit many Poulan and Greenworks consumer chainsaws and pole saws with the same specs.\u003c\/li\u003e\n  \u003cli\u003eWorks with several other brands including Ryobi, Homelite, Husqvarna-compatible aftermarket applications.\u003c\/li\u003e\n  \u003cli\u003eIf you have a part number list (e.g., Craftsman 358.34102), compare it to the kit specs for quick validation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how does it help me keep working?\u003c\/h3\u003e\n\u003cp\u003eInside you get one replacement 16\" guide bar plus three identical 16\" chains—enough spares to extend run time between purchases. Having three chains means you can rotate chains to maintain sharpness and reduce downtime during yard work or property maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 16-inch guide bar sized for this chain pitch and gauge.\u003c\/li\u003e\n  \u003cli\u003eThree 16-inch chains (.050\" gauge, 3\/8\" pitch, 56 drive links) for immediate replacements.\u003c\/li\u003e\n  \u003cli\u003eSpare chains allow sharpening rotation and quick swaps in the field.\u003c\/li\u003e\n  \u003cli\u003e24\/7 customer service from Fifchall for sizing questions or installation help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Fifchall combo is intended for homeowners, landscapers, and property caretakers who use 16\" chainsaws or pole saws with 3\/8\" LP pitch, .050\" gauge, and 56 drive links. It’s especially useful for buyers who want an affordable replacement bar plus extra chains to reduce interruptions during pruning, storm cleanup, or routine firewood preparation. If you’re unsure about fit, match your saw’s stamped bar and chain specifications or contact Fifchall with your model info for assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these chains fit my 16-inch Echo chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Echo model uses 3\/8\" LP pitch, .050\" gauge and 56 drive links; match those specs to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains are included and why?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes three 16\" chains plus one bar so you have spares to rotate and reduce downtime.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54204505063608,"sku":"B0DBHGZ1H6","price":98.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-16in-bar-front-view.jpg?v=1790632074"},{"product_id":"fifchall-18-inch-325-pitch-chainsaw-chain-4-pack-050-gauge-68-drive-links-for-post-2023-stihl-ms250-ms251","title":"Fifchall 18-inch .325 Pitch Chainsaw Chain 4-Pack — .050 Gauge, 68 Drive Links for post-2023 Stihl MS250\/MS251","description":"\u003cp\u003e\u003cstrong\u003eHigh-strength replacement: this Fifchall 4-pack supplies four 18-inch .325\" pitch, .050\" gauge chains with 68 drive links engineered to fit post-2023 Stihl saws such as MS250 and MS251.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl saw needs a fresh cutting loop, these chains are made from heat-treated German steel with hardened rivets and chrome-plated cutters to deliver consistent, smooth cutting and corrosion resistance. The set is intended for bars and saw models that require a .050\" gauge chain; older Stihl bars that use a .063\" gauge will not be compatible. Always confirm bar length, pitch, gauge and drive-link count before purchase or contact Fifchall support for help matching sizes.\u003c\/p\u003e\n\n\u003ch3\u003eWill these chains fit my Stihl 025 or MS250?\u003c\/h3\u003e\n\u003cp\u003eThese chains fit Stihl models that accept an 18\" chain with .325\" pitch and .050\" gauge and require 68 drive links — commonly post-2023 MS250, MS251, some 025 variants, and similar models. Check the guide bar side stamp or your owner’s manual for the exact bar specs; if your bar is .063\" gauge, this product will not fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many post-2023 Stihl 025, MS250, MS251 models\u003c\/li\u003e\n  \u003cli\u003eSpec: 18\" length, .325\" pitch, .050\" gauge, 68 drive links\u003c\/li\u003e\n  \u003cli\u003eNot for older bars stamped .063\" gauge\u003c\/li\u003e\n  \u003cli\u003eContact Fifchall with your saw\/bar details for confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and sharp are these replacement chains?\u003c\/h3\u003e\n\u003cp\u003eFifchall chains use heat-treated German steel and Japanese chrome-plating on cutters to extend edge life and resist rust. Hardened rivets and precision manufacturing help keep tension and form under heavy cutting, so the chain stays reliable over repeated sharpening cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated German steel for strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eChrome-plated cutters for longer cutting life and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHardened rivets to maintain chain integrity\u003c\/li\u003e\n  \u003cli\u003ePrecision ground cutters for smoother initial performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstalling these chains requires attention to direction and proper tension: the cutters must face forward on the top of the bar. After installation, maintain correct chain tension, keep the bar and sprocket well-oiled, and sharpen as soon as cutting performance declines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eObserve chain direction — incorrect direction prevents cutting\u003c\/li\u003e\n  \u003cli\u003eSet correct tension before running the saw\u003c\/li\u003e\n  \u003cli\u003eUse bar and chain oil; maintain the bar groove and sprocket condition\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters or replace when performance drops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I pick the right chain size if I’m unsure?\u003c\/h3\u003e\n\u003cp\u003eMeasure or read the markings on the guide bar for pitch, gauge and drive links. If you can’t find the markings, remove the chain and count drive links or consult your saw’s manual. Fifchall also offers customer support to help match chain sizes to your bar.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck guide bar side stamp for pitch and gauge\u003c\/li\u003e\n  \u003cli\u003eCount drive links on the old chain to confirm link number\u003c\/li\u003e\n  \u003cli\u003eConsult the saw manual for original equipment chain specs\u003c\/li\u003e\n  \u003cli\u003eContact Fifchall support for size-matching assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack is aimed at arborists, landscapers, contractors, and homeowners who own Stihl chainsaws requiring an 18\" .325\"\/.050\" chain and want spare, durable replacement chains in bulk. It’s useful for frequent users who need quick chain swaps during heavy cutting days, and for anyone seeking aftermarket chains built with hardened rivets and chrome-plated cutters for reliable, repeatable performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these chains compatible with older Stihl MS250 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit MS250 models that use a .050\" gauge bar. Older MS250 bars with .063\" gauge are not compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains are included and what are the specs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This set contains four 18\" chains: .325\" pitch, .050\" gauge, 68 drive links per chain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54206022385848,"sku":"B0FBWSDTK8","price":104.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-18in-chains.jpg?v=1790647881"},{"product_id":"fifchall-18-chainsaw-bar-and-m72-chain-combo-18-inch-325-050-72dl-with-3-semi-chisel-low-kickback-chains","title":"Fifchall 18\" Chainsaw Bar and M72 Chain Combo — 18-inch .325\"\/.050\" 72DL with 3 Semi-Chisel Low-Kickback Chains","description":"\u003cp\u003e\u003cstrong\u003eAn 18-inch high-strength guide bar paired with three M72 .325\" pitch, .050\" gauge, 72-drive-link semi-chisel chains designed to fit Husqvarna and many popular saw models for reliable cutting and low kickback.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Fifchall combo supplies a durable 18\" alloy guide bar and three speedcut M72 chains engineered for extended wear, consistent lubrication, and safer control. The kit is built to match saws that use a .325\" pitch and .050\" gauge with 72 drive links — ideal when you need a full replacement bar and spare chains in one purchase. Materials and heat treatment focus on longevity and steady cutting performance across general-purpose felling, limbing, and firewood work.\u003c\/p\u003e\n\n\u003ch3\u003eWhich saw models and mounts does this bar-and-chain combo fit?\u003c\/h3\u003e\n\u003cp\u003eThe Fifchall 18\" bar with M72 chain is compatible with a long list of Husqvarna models and many other brands provided the saw uses a .325\" pitch and .050\" gauge with 72 drive links. It is a tail-mount (K095) bar with a 10-tooth sprocket nose, so confirm your saw’s sprocket and mounting style before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Husqvarna models: 1400, 254, 254XP, 257, 261, 262, 336, 338XPT, 339XP, 355, 357 series, 359, 360, 362 series, 460, 466, 51, 55 Rancher, 555, 560XP, 57, 440, 545, 345, 350, 550XP and more.\u003c\/li\u003e\n  \u003cli\u003eOther fits: Craftsman 316.38019, Echo CS-4510, Makita DCS430\/DCS431\/DCS46018\/DCS510 etc., Jonsered 2050\/2145\/2150\/370\/410\/420 and similar models (ensure .325\" sprocket).\u003c\/li\u003e\n  \u003cli\u003eBar mount type: tail mount K095; sprocket nose with 10 teeth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the bar and chain hold up during extended use?\u003c\/h3\u003e\n\u003cp\u003eThe 18\" bar is made from a high-strength alloy with wear-resistant treatments and an integrated lubrication channel that helps reduce friction at the guide plate. The M72 semi-chisel chains are heat-treated, feature hardened rivets, and are finished to resist corrosion so they stay sharper longer under normal cutting conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy bar construction for improved durability and plate stability.\u003c\/li\u003e\n  \u003cli\u003eEfficient lubrication channel to limit heat and wear on chain and bar.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated semi-chisel chains with hardened rivets for extended edge life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these chains safe and easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe speedcut M72 chains are designed as low-kickback semi-chisel types to reduce abrupt reactions while cutting; they are supplied with protective oil and corrosion resistance. Installation is straightforward for anyone familiar with chainsaw maintenance — match bar length, pitch, gauge, and drive link count, then tension according to your saw manufacturer’s instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-kickback semi-chisel profile for smoother behavior during cuts.\u003c\/li\u003e\n  \u003cli\u003eChains arrive lightly oiled and corrosion-protected for storage and transport.\u003c\/li\u003e\n  \u003cli\u003eEasy swap: confirm .325\" pitch, .050\" gauge, 72 drive links before fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to ensure proper fit?\u003c\/h3\u003e\n\u003cp\u003eMeasure the existing bar length, verify the chain pitch (.325\"), gauge (.050\"), and count the drive links (72) on your current chain, and confirm your saw’s mount type (tail mount K095) and sprocket nose tooth count (10). If uncertain, Fifchall offers after-sales assistance to validate fit and sizing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm bar length: 18 inches measured tip-to-tip.\u003c\/li\u003e\n  \u003cli\u003eVerify chain pitch .325\" and gauge .050\" with 72 drive links.\u003c\/li\u003e\n  \u003cli\u003eCheck mounting style and sprocket nose tooth count (tail-mount K095, 10 teeth).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Fifchall 18\" bar and M72 chain combo suits homeowners, landscapers, and professional users who own compatible .325\"\/.050\" saws and want a robust replacement bar plus spare chains for uninterrupted work. It’s particularly useful for those who need a reliable mid-length setup for felling small to medium trees, cutting firewood, pruning, and general property maintenance who value durability, easier lubrication, and lower kickback behavior.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Husqvarna chainsaw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Husqvarna models using .325\" pitch, .050\" gauge, and 72 drive links; confirm tail-mount K095 and 10-tooth nose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many chains come with the bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This combo includes one 18\" guide bar and three M72 chains for spare replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54206658576568,"sku":"B0DPBWPZHC","price":113.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-18in-bar-front-view.jpg?v=1790652435"},{"product_id":"fifchall-24-inch-chainsaw-chains-4-pack-050-gauge-3-8-lp-84-links-heat-treated-rivets-chrome-semi-chisel-low-kickback","title":"Fifchall 24-inch chainsaw chains 4-pack, .050\" gauge 3\/8\" LP 84 links — heat-treated rivets \u0026 chrome semi-chisel low-kickback","description":"\u003cp\u003e\u003cstrong\u003eThese are four replacement 24-inch chainsaw chains by Fifchall with .050\" gauge, 3\/8\" LP pitch and 84 drive links, made to fit many popular chainsaw models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your saw needs a fresh chain, this 4-pack gives you spare chains ready for routine maintenance or a quick swap in the field. The chains are built with heat-treated rivets and a chrome outer finish for wear resistance, and their semi-chisel low-kickback cutters are intended for smooth, consistent cutting performance. Before ordering, verify the required gauge, pitch and number of drive links for your bar and sprocket to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill these chains fit my chainsaw model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on three dimensions: gauge (thickness of drive links), pitch (distance between links) and total drive-link count. These chains are .050\" gauge, 3\/8\" LP pitch and contain 84 drive links, which match many 24\" bars used on common saws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your owner’s manual or the stamped numbers on your bar for gauge, pitch and link count.\u003c\/li\u003e\n  \u003cli\u003eFits many models from Husqvarna, Stihl, Echo, Poulan, Makita and McCulloch when those specs match.\u003c\/li\u003e\n  \u003cli\u003eIf in doubt, remove the old chain and count links or measure pitch before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are Fifchall chains?\u003c\/h3\u003e\n\u003cp\u003eThese chains use heat-treated and quenched rivets to strengthen link connections, and a chrome-finished exterior to resist abrasion. The construction is intended to reduce the need for frequent adjustments and to extend service life under typical cutting tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated rivets for stronger joints and longer-lasting links.\u003c\/li\u003e\n  \u003cli\u003eChrome outer layer for improved wear resistance and rust protection.\u003c\/li\u003e\n  \u003cli\u003eSemi-chisel low-kickback cutters balance cutting speed with user safety features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstalling these chains is the same process as other standard 24\" chains: align the drive links on the bar and sprocket, set proper chain tension, and secure the bar cover. Regular sharpening, correct tension and consistent lubrication keep cutting performance steady and prolong chain life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard replacement procedure—no special tools beyond typical chainsaw accessories.\u003c\/li\u003e\n  \u003cli\u003eMaintain proper tension and use bar oil for lubrication during operation.\u003c\/li\u003e\n  \u003cli\u003eSharpen cutters or replace a chain when cutting performance drops or teeth are damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cutting tasks are these chains suited for?\u003c\/h3\u003e\n\u003cp\u003eWith a 24\" length and semi-chisel teeth, this chain is suited to felling medium-to-large trees, limbing, and processing larger logs. The low-kickback profile helps manage rebound on tougher cuts while keeping effective chip removal and smooth tooth engagement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood for heavier-duty yard and forestry work needing a 24\" bar.\u003c\/li\u003e\n  \u003cli\u003eSuitable for felling, bucking, and limbing where a durable chain is required.\u003c\/li\u003e\n  \u003cli\u003eNot intended to replace specialized carbide or commercial cutters for extreme professional use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This four-chain set is aimed at homeowners, arborists and professionals who own chainsaws with a 24\" bar that require .050\" gauge and 3\/8\" LP pitch chains with 84 drive links. It’s useful for anyone who wants multiple spare chains for continuous work, seasonal maintenance, or to keep chains on hand for different saws that share the same specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What exact specs does this chain use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each chain is 24\" long with .050\" gauge, 3\/8\" LP pitch and 84 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these chains on a Husqvarna 460?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your Husqvarna 460 uses a 24\" bar with .050\" gauge, 3\/8\" LP pitch and 84 drive links.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54206949621944,"sku":"B0DBT171SQ","price":104.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-front-packaging-24in-chain.jpg?v=1790653824"},{"product_id":"fifchall-20-inch-chainsaw-bar-3-pack-full-chisel-chains-for-stihl-3-8in-pitch-050-gauge-72-links-hardened-alloy-bar","title":"Fifchall 20-Inch Chainsaw Bar \u0026 3-Pack Full-Chisel Chains for Stihl 3\/8in Pitch .050 Gauge 72 Links — Hardened Alloy Bar","description":"\u003cp\u003e\u003cstrong\u003eFifchall's 20-inch replacement bar and three full-chisel chains fit many Stihl models that accept a 3\/8\" pitch, .050\" gauge, 72 drive link configuration.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl saw uses a 20\" guide bar and standard 3\/8\" pitch chain, this Fifchall combo supplies a hardened alloy bar plus three German-steel full-chisel chains designed for long wear and consistent cutting performance. The package is built to be a direct, affordable replacement for a long list of Stihl models — useful whether you’re maintaining a fleet of saws or need spare chains for extended jobs.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bar and chain match my Stihl saw?\u003c\/h3\u003e\n\u003cp\u003eCheck four measurements on your current setup: bar length, chain pitch, gauge, and number of drive links. These specifications are typically stamped on the guide bar or listed in the owner’s manual; the Fifchall combo matches saws that require a 20\" bar with 3\/8\" pitch, .050\" gauge and 72 drive links.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBar length: 20 inches — measure end to end of the guide bar.\u003c\/li\u003e\n  \u003cli\u003ePitch: 3\/8\" — measured between three rivets divided by two.\u003c\/li\u003e\n  \u003cli\u003eGauge: .050\" — thickness of the drive link that fits the bar groove.\u003c\/li\u003e\n  \u003cli\u003eDrive links: 72 — count the links that sit in the bar groove.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and sharp are the included chains?\u003c\/h3\u003e\n\u003cp\u003eThe chains are made from heat-treated German steel and use full-chisel cutters for aggressive, fast cutting action. Hardened rivets and protective oil coating improve corrosion resistance and prolong service life under heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-chisel design for efficient wood removal and speed.\u003c\/li\u003e\n  \u003cli\u003eHeat treatment for higher hardness and longer edge retention.\u003c\/li\u003e\n  \u003cli\u003eHardened rivets reduce stretch and wear in tough conditions.\u003c\/li\u003e\n  \u003cli\u003eProtective oil applied to resist rust during storage and transit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features does the 20\" guide bar provide?\u003c\/h3\u003e\n\u003cp\u003eThe guide bar is manufactured from a high-strength alloy for improved wear resistance and stable guide plate performance. It includes design elements for reduced kickback and an efficient lubrication path to keep the chain running smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength alloy construction for longevity.\u003c\/li\u003e\n  \u003cli\u003eOptimized guide plate for steady chain tracking.\u003c\/li\u003e\n  \u003cli\u003eEfficient oiling channel to lower friction and extend chain life.\u003c\/li\u003e\n  \u003cli\u003eManufactured to fit a wide range of Stihl saw models that accept 20\" bars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same basic steps as replacing any standard Stihl-compatible bar and chain: relieve tension, fit the bar, mount the chain, and re-tension per manufacturer torque and tension guidelines. Routine maintenance — sharpening, correct tension, and regular lubrication — will keep the kit performing reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for direct fit on compatible Stihl models with matching specs.\u003c\/li\u003e\n  \u003cli\u003eChains arrive lightly oiled and ready for an initial installation.\u003c\/li\u003e\n  \u003cli\u003eSharpen, check tension, and oil before extended cutting sessions.\u003c\/li\u003e\n  \u003cli\u003e3 chains included provide spares to minimize downtime on jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Fifchall 20\" bar and chain bundle is aimed at homeowners, arborists, and professional users who operate Stihl chainsaws requiring a 20\" guide bar with 3\/8\" pitch and .050\" gauge. It’s a practical purchase for anyone who wants an affordable replacement bar plus multiple spare chains for continuous cutting work, routine maintenance, or field repairs. For exact compatibility, confirm your saw’s bar length, pitch, gauge, and drive-link count before ordering; contact Fifchall support if you need help identifying the correct size.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these chains fit my Stihl MS360?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your MS360 uses a 20\" bar, 3\/8\" pitch, .050\" gauge and 72 drive links, this Fifchall combo is compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the chains come ready to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Chains arrive lightly coated with protective oil; you should clean, tension, and lubricate before initial use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fifchall","offers":[{"title":"Default Title","offer_id":54207222251704,"sku":"B0DYJ8475F","price":135.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/fifchall-20in-bar-front-view.jpg?v=1790654879"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/fifchall-20in-bar-front-view.jpg?v=1790679952","url":"https:\/\/canadianlawn.ca\/collections\/fifchall.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}