{"title":"Dalom","description":"\u003cp\u003eBrowse 20 Dalom products at Canadian Lawn, including string trimmer parts \u0026amp; heads and trimmer line \u0026amp; spools. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"dalom-k10-wat-carburetor-rebuild-kit-2-pack-for-wa-wt-series-diaphragms-gaskets-needle-valves","title":"Dalom K10-WAT Carburetor Rebuild Kit (2-Pack) for WA\/WT Series — Diaphragms, Gaskets \u0026 Needle Valves","description":"\u003cp\u003e\u003cstrong\u003eDalom K10-WAT carburetor rebuild kit (2-pack) replaces worn diaphragms, gaskets, and needle assemblies to restore performance on WA and WT series 2-cycle small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your chainsaw, trimmer, edger, or leaf blower is running rough, hard to start, or flooding, this Dalom two-set K10-WAT rebuild kit offers the common replacement parts needed to refresh Walbro-style carburetors. Designed to match Walbro K10-WAT and D10-WAT specifications and compatible with many WA and WT series models, the kit provides a cost-effective way to service multiple machines without buying a new carburetor.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the typical diaphragm, gaskets, needle valves, and small seals that deteriorate with fuel exposure and time. Replacing these wear items often solves fuel flow problems, poor idling, and hard starts caused by cracked diaphragms or hardened gaskets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo complete rebuild sets: diaphragms, gaskets, needle assemblies\u003c\/li\u003e\n  \u003cli\u003eSmall seals and inlet components to prevent leaks and vapor lock\u003c\/li\u003e\n  \u003cli\u003eParts engineered to fit Walbro K10-WAT\/D10-WAT dimensions for WA\/WT series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and brands will this fit?\u003c\/h3\u003e\n\u003cp\u003eThis Dalom pack is engineered to work with a wide range of WA and WT series Walbro-style carburetors found on many 2-cycle outdoor power tools. It’s compatible with models from Poulan, Craftsman, Weedeater and other mainstream brands that use K10-WAT or equivalent Walbro parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits WA series: WA-1 through WA-13, WA-17–WA-213, WA-222 and similar\u003c\/li\u003e\n  \u003cli\u003eFits WT series: WT-1–WT-4, WT-10–WT-16, WT-18–WT-35 and related variants\u003c\/li\u003e\n  \u003cli\u003eAlso replaces Echo part 12310016330 and several Walbro D26-WAT\/WT model numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the kit to rebuild a carburetor?\u003c\/h3\u003e\n\u003cp\u003eRebuilding is a moderate DIY task: disassemble the carburetor, remove old parts, clean the body thoroughly, then install the new diaphragms, gaskets, and needles in the correct order. Work methodically, document part orientation with photos, and use fuel-safe cleaners to avoid damaging rubber components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove carburetor from engine and note linkage positions\u003c\/li\u003e\n  \u003cli\u003eTake photos, then strip old diaphragms, needles, and seals\u003c\/li\u003e\n  \u003cli\u003eClean passages, dry completely, and install new parts per diagram\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements should I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eAfter replacing the worn seals and diaphragms, expect steadier idling, easier starting, and reduced fuel leakage or flooding. The rebuild kit restores proper fuel metering and diaphragm responsiveness but won’t fix mechanical damage to the carburetor body or piston-related engine issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother throttle response and more reliable idling\u003c\/li\u003e\n  \u003cli\u003eReduced fuel leaks and fewer flooding incidents\u003c\/li\u003e\n  \u003cli\u003eImproved starting consistency if old diaphragms were degraded\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom K10-WAT (Pack of 2) rebuild kit is aimed at homeowners, landscapers, and small-engine technicians who maintain multiple 2-cycle tools or prefer repairing equipment over replacing entire carburetors. It’s ideal when the carburetor body is intact but rubber parts have hardened, torn, or become fuel-swollen—offering an economical fix for compatible WA and WT series machines across brands like Poulan, Craftsman, Weedeater, Ryobi, Homelite, Toro, and others.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit replace an entire carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit replaces diaphragms, gaskets, and needles; it won’t repair cracked carburetor bodies or damaged throttle shafts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will two sets fit multiple machines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pack contains two complete rebuild sets, useful for servicing two carburetors or keeping a spare on hand.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54192682729656,"sku":"B07MVWJTZ4","price":42.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-k10-wat-front-packaging.jpg?v=1790547871"},{"product_id":"dalom-fs55r-tune-up-kit-for-stihl-fs55-fc55-trimmers-air-filters-fuel-lines-primer-bulbs","title":"Dalom FS55R Tune-Up Kit for Stihl FS55\/FC55 Trimmers — Air Filters, Fuel Lines \u0026 Primer Bulbs","description":"\u003cp\u003e\u003cstrong\u003eDalom FS55R Tune-Up Kit is a complete replacement set of air filters, fuel lines, primer bulbs, fuel filters and spark plug designed to restore reliable starting and smoother running for Stihl FS55\/FC55 series trimmers and compatible combi motors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl FS55 or compatible handheld motor is showing signs of hard starting, rough idle, or fuel delivery problems, this kit bundles the most commonly replaced wear items so you can return the unit to near-new performance without hunting for separate parts. The components match the fit and function of original equipment for many Stihl models, letting you service the tool quickly and keep it in the field.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Stihl models will this kit service?\u003c\/h3\u003e\n\u003cp\u003eThis Dalom kit covers a wide range of Stihl trimmers, brushcutters and combi motors. It fits FS55 and FC55 series handheld tools as well as related HM\/kombi powerheads and some HL hedge trimmers. Always cross-check your model number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with: Stihl FS38, FS45, FS46, FS55 and FC55 variants\u003c\/li\u003e\n  \u003cli\u003eAlso fits: KM55\/ KM55C\/ KM55R\/ KM55RC kombi motors\u003c\/li\u003e\n  \u003cli\u003eWorks with hedge trimmers: HL45, HL45Z, HL45DZ\u003c\/li\u003e\n  \u003cli\u003eReplaces common Stihl OEM part numbers listed for air filter and components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why each matters?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies multiple service items that routinely wear or clog. Replacing them together ensures consistent fuel and air flow, simpler troubleshooting, and fewer repeat service trips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 air filters — prevent dirt ingestion and protect the carburetor\u003c\/li\u003e\n  \u003cli\u003e1 fuel line — restores proper fuel flow and prevents leaks\u003c\/li\u003e\n  \u003cli\u003e2 fuel filters — keep contaminants out of the carburetor and engine\u003c\/li\u003e\n  \u003cli\u003e2 primer bulbs — ensure reliable priming and easier starting\u003c\/li\u003e\n  \u003cli\u003e1 spark plug — renews ignition for cleaner combustion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these parts and how long will it take?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic small-engine maintenance. Most components press or clip into place, and the spark plug swaps with a standard wrench. Expect 20–45 minutes for a complete replacement depending on experience and access to the engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir filters: snap or screw into the filter housing after removing the cover\u003c\/li\u003e\n  \u003cli\u003eFuel line and filter: cut to length, attach with clamps or push-fit connectors\u003c\/li\u003e\n  \u003cli\u003ePrimer bulb: press into the mount and verify one-way valve seating\u003c\/li\u003e\n  \u003cli\u003eSpark plug: remove old, gap new plug to manufacturer spec, torque to fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit match OEM performance and which part numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThis replacement set is engineered to meet the fit and functions expected of original parts for many Stihl units. It lists equivalent OEM references so you can verify compatibility with your specific model and service manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes air filter replacements for common Stihl part references\u003c\/li\u003e\n  \u003cli\u003eDesigned for form-fit compatibility with FS and KM series housings\u003c\/li\u003e\n  \u003cli\u003eContains fuel and primer items chosen to mirror OEM flow and sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Dalom FS55R Tune-Up Kit is intended for homeowners, landscapers, and equipment service technicians who own Stihl FS\/FC55-series trimmers, KM55 combi motors, or compatible hedge trimmers and want a single-purchase solution for routine maintenance. It’s ideal when your machine shows hard starting, poor idling, fuel smell, or when scheduled service calls for air, fuel, and ignition replacements. Always confirm your model number and consult the manufacturer’s service manual for torque and gap specifications before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Stihl FS55R?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Dalom FS55R kit is made to fit Stihl FS55\/FC55 series models and many related KM\/HL variants; verify your model number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools required to install the parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools like a screwdriver and spark plug socket are usually sufficient; install time is typically 20–45 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54192725131448,"sku":"B07FKHVPJ7","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-fs55r-front-packaging.jpg?v=1790549287"},{"product_id":"dalom-carburetor-replacement-for-ryobi-homelite-25cc-30cc-ss26-complete-repair-kit-with-primer-bulb-gasket","title":"Dalom Carburetor Replacement for Ryobi \u0026 Homelite 25cc–30cc SS26 — Complete Repair Kit with Primer Bulb \u0026 Gasket","description":"\u003cp\u003e\u003cstrong\u003eDalom 308054077 carburetor is a direct replacement carburetor kit designed to restore fuel delivery for Homelite and Ryobi 25cc–30cc outdoor power engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ryobi or Homelite string trimmer, backpack blower, hedge trimmer, pole saw or chainsaw is stalling, hard to start, or idling erratically, a worn or clogged carburetor is a common cause. This Dalom unit replaces several OEM numbers (including C1U-H60, 308054013, 308054004, 308054077 and 308054012) and arrives as a complete repair kit so you can swap the part and return your small engine to reliable operation without hunting down separate components.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my Ryobi or Homelite 25cc–30cc engine?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers many 25cc, 26cc and 30cc models from Ryobi and Homelite, including SS26, SS30, CS26, CS30, BC30, TP26 and TP30 and Homelite D3300 engines. Match the part numbers and engine model before ordering to ensure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers: C1U-H60, C1U-H60D, C1U-H60E and others.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Ryobi\/Homelite trimmers, blowers, hedge trimmers, pruners and chainsaws.\u003c\/li\u003e\n  \u003cli\u003eIntended for 25cc, 26cc and 30cc two-stroke small engines.\u003c\/li\u003e\n  \u003cli\u003eConfirm your engine model and part number to avoid incorrect purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included in the replacement kit?\u003c\/h3\u003e\n\u003cp\u003eThe Dalom package includes the carburetor plus all the small parts commonly needed during a repair so you won’t need to order extras. This helps speed up installation and reduces the chance of missing gaskets or lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne carburetor body ready to install.\u003c\/li\u003e\n  \u003cli\u003eOne gasket to ensure a proper seal to the engine.\u003c\/li\u003e\n  \u003cli\u003eOne primer bulb to aid cold starts.\u003c\/li\u003e\n  \u003cli\u003eOne spark plug and one in-line fuel filter included.\u003c\/li\u003e\n  \u003cli\u003eTwo short fuel tubes to replace brittle or cracked lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does swapping this carburetor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn carburetor can restore consistent fuel flow and mixture control, improving starting, throttle response and idle stability. The new primer bulb and fuel filter help remove air and contamination from the fuel circuit for smoother operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces clogged or leaking carburetor passages that cause stalling.\u003c\/li\u003e\n  \u003cli\u003eNew primer bulb reduces dry starts and eases choke usage.\u003c\/li\u003e\n  \u003cli\u003eFuel filter prevents debris from reaching the carburetor jets.\u003c\/li\u003e\n  \u003cli\u003eFresh gasket and tubes seal fuel paths and stop leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e This Dalom carburetor kit is aimed at DIYers, landscapers and equipment owners who need an affordable, ready-to-install replacement for failing carburetors on 25cc–30cc Ryobi and Homelite small engines. If you have confirmed a matching part number and want to restore reliable starting and running without buying a new tool, this kit contains the common parts required for a straightforward repair. Always verify compatibility with your specific model and follow safe maintenance practices when installing engine parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit Ryobi SS26 and SS30 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is compatible with many SS26 and SS30 models, but verify your engine’s part number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes with the Dalom 308054077 carburetor kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the carburetor, gasket, primer bulb, spark plug, fuel filter, and two fuel tubes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54193105731768,"sku":"B07BTJR8V2","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-carburetor-front-view.jpg?v=1790558710"},{"product_id":"dalom-srm-230-carburetor-replacement-kit-for-echo-srm230-series-full-repair-kit-with-primer-bulb-spark-plug","title":"Dalom SRM 230 Carburetor Replacement Kit for Echo SRM230 Series — Full Repair Kit with Primer Bulb \u0026 Spark Plug","description":"\u003cp\u003e\u003cstrong\u003eThe Dalom SRM 230 Carburetor is a direct replacement carburetor kit designed to restore fuel delivery and reliable starting for Echo SRM230-series trimmers and compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Echo trimmer stalls, runs inconsistently, or won’t start, the carburetor is often the culprit. This Dalom assembly replaces multiple Echo part numbers and arrives as a full kit—carburetor plus grommet, fuel filter, foam filters, spark plug, gaskets and primer bulb—to simplify repair and avoid repeated troubleshooting. The unit fits a range of Echo line-up and related power edgers and pole pruners, making it a cost-effective parts swap when you need to get back to yard work quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Echo models and part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis Dalom carburetor is made to match the fit and function of several Echo carburetor references used on SRM and GT models and on select power edgers and pole pruners. Always cross-check the engine model or original part number before purchase to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Echo SRM230, SRM230S, SRM230U, SRM231, SRM231S, SRM231U, GT230, GT231.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Echo PE230 and PE231 power edgers and PAS230, PAS231, PPT230, PPT231 pole pruners.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers RB-K66, RB-K66B, RB-K70, RB-K70A and A021000720–A021000723 plus A021000380–A021000382.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit make installation and tuning easier?\u003c\/h3\u003e\n\u003cp\u003eThe Dalom kit arrives with the most commonly needed consumables so you won’t need extra parts after opening the box. The included primer bulb and gaskets let you complete a standard carburetor swap and check for leaks; the spare foam filters and fuel filter help ensure the fuel and air pathways are clear for reliable starting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes carburetor, grommet \u0026amp; tube assembly, fuel filter and two foam filters.\u003c\/li\u003e\n  \u003cli\u003eSupplies a spark plug, gasket set and a replacement primer bulb for a single-service repair.\u003c\/li\u003e\n  \u003cli\u003eSimplifies bench tuning and on-tool adjustments without scavenging parts from other machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this restore engine performance and prevent common fuel issues?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or gummed carburetor can resolve problems like hard starting, rough idle, and poor throttle response caused by clogged passages or leaking diaphragms. While it replaces the hardware responsible for air\/fuel mixture, proper installation and the correct fuel\/oil mix are essential for lasting results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates many symptoms caused by degraded diaphragms or blocked jets.\u003c\/li\u003e\n  \u003cli\u003eFresh gaskets and primer bulb reduce the chance of vacuum or fuel leaks after installation.\u003c\/li\u003e\n  \u003cli\u003eWorks best when paired with clean fuel and manufacturer-recommended oil ratios.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to avoid the wrong part?\u003c\/h3\u003e\n\u003cp\u003eTo prevent ordering an incompatible carburetor, verify the engine model stamped on the trimmer, compare the original part number if available, and visually match mounting points and linkage. Slight differences between model years mean a quick cross-check saves return hassles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm your engine or machine model (SRM230 series, GT230\/231, PE230\/231, PAS\/PPT series).\u003c\/li\u003e\n  \u003cli\u003eCompare existing carburetor mounting bolt pattern and fuel tube locations.\u003c\/li\u003e\n  \u003cli\u003eInspect the OEM part number on the old carburetor, if present, against the replaced numbers list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Dalom SRM 230 Carburetor kit is aimed at DIY small-engine repairers, landscapers, and homeowners who prefer to fix equipment themselves instead of replacing the whole unit. It’s especially useful for anyone maintaining Echo SRM-series trimmers, compatible edgers or pole pruners who wants a complete replacement package that includes the typical consumables needed to finish the job in one visit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Dalom carburetor fit Echo SRM230?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Dalom SRM 230 carburetor is designed to replace stock units on Echo SRM230-series models and several related Echo models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes the carburetor, grommet \u0026amp; tube, fuel filter, two foam filters, a spark plug, gasket set, and a primer bulb.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54193573331128,"sku":"B07BTD2213","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-srm230-front-view.jpg?v=1790562500"},{"product_id":"dalom-trimmer-head-128ld-direct-fit-husqvarna-t25-replacement-m10-lh-thread-fits-0-065-0-095in-line","title":"Dalom Trimmer Head 128LD – Direct-Fit Husqvarna T25 Replacement, M10 LH Thread, Fits 0.065–0.095in Line","description":"\u003cp\u003e\u003cstrong\u003eThe Dalom 128LD trimmer head is a direct-fit replacement for many Husqvarna and compatible brushcutter models, accepting 0.065\", 0.080\" or 0.095\" trimmer line and using an M10 x 1.25 left-hand thread.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis precision-engineered replacement head gives you an easy-to-install spool for routine string-trimmer maintenance. It’s built to match fitment specs for Husqvarna T25 series and numerous 120–300 series models, plus several Poulan and Jonsered-compatible machines. The design focuses on secure attachment, predictable line feeding, and compatibility across a wide set of OEM part numbers so you can get back to trimming quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill this trimmer head fit my Husqvarna model?\u003c\/h3\u003e\n\n\u003cp\u003eCheck the thread size and the original part references on your machine before ordering. The Dalom 128LD uses an M10 x 1.25 left-hand thread and is designed to replace Husqvarna T25 heads and many 120–300 series trimmer models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Husqvarna models including 122LDX, 123L, 125L, 128L, 128LD, 128LDX, 129L families.\u003c\/li\u003e\n  \u003cli\u003eCompatible with larger Husqvarna lines such as 240L, 323\/324\/325 series and select 343\/345 models.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Poulan and Jonsered brushcutter models that share the T25 standard.\u003c\/li\u003e\n  \u003cli\u003eVerify your existing head’s thread size and part number to avoid mismatch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and reload line?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows the same steps as OEM T25 heads: remove the old head, thread on the new unit, and load line into the spool. The spool accepts three common diameters and the head’s construction makes reloading straightforward, even in the field.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStandard M10 left-hand thread for direct screw-on replacement.\u003c\/li\u003e\n  \u003cli\u003eSpool accepts 0.065\", 0.080\", or 0.095\" gauge line for flexibility.\u003c\/li\u003e\n  \u003cli\u003eUser-friendly spool layout reduces tangles on reloads.\u003c\/li\u003e\n  \u003cli\u003eDesigned for hand or simple tool-assisted mounting per your trimmer’s manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and performance highlights?\u003c\/h3\u003e\n\n\u003cp\u003eThe Dalom 128LD is produced to meet fit-and-function expectations of OEM heads, emphasizing secure fastening and consistent line feed. Materials and molding are chosen for toughness under regular yard-work conditions, while the spool geometry helps maintain line trim length and balance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRobust housing reduces wobble and improves cutting stability.\u003c\/li\u003e\n  \u003cli\u003ePrecision thread engagement minimizes loosening during use.\u003c\/li\u003e\n  \u003cli\u003eBalanced spool design supports even line wear and fewer vibrations.\u003c\/li\u003e\n  \u003cli\u003eWorks with standard bump or fixed-feed styles depending on installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich line sizes and accessories work best with this head?\u003c\/h3\u003e\n\n\u003cp\u003eThe Dalom 128LD accepts the three most common trimmer line gauges, letting you choose thinner line for lighter grass or thicker line for thicker weeds and brush. Use lines rated for your trimmer’s recommended speed and cutting conditions, and follow the spool-loading pattern indicated in the head instructions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with 0.065\", 0.080\" and 0.095\" nylon trimmer lines.\u003c\/li\u003e\n  \u003cli\u003eUse lines labeled for high-RPM brushcutters when tackling dense vegetation.\u003c\/li\u003e\n  \u003cli\u003eReplace the spool if you notice cracking or excessive wear on the hub.\u003c\/li\u003e\n  \u003cli\u003eKeep a small tool kit on hand for secure mounting and periodic checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Landscapers, homeowners, and maintenance crews with Husqvarna, Poulan or Jonsered machines that use the T25\/128-series head will find the Dalom 128LD a practical replacement. It’s aimed at anyone who needs a reliable, OEM-compatible spool with flexible line-size options and an M10 left-hand thread—just confirm your trimmer’s thread and part number before purchasing.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this trimmer head use left- or right-hand threads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses an M10 x 1.25 left-hand thread; confirm your trimmer’s thread orientation before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What line sizes will fit the Dalom 128LD spool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spool accepts 0.065\", 0.080\" and 0.095\" trimmer line gauges.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54193814831288,"sku":"B07M8QH273","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-trimmer-head-front.jpg?v=1790566315"},{"product_id":"dalom-deck-engagement-cable-for-cub-cadet-ltx1040-ltx1050h-60-inner-z-bend-spring","title":"Dalom Deck Engagement Cable for Cub Cadet LTX1040-LTX1050H – 60\" Inner, Z‑bend \u0026 Spring","description":"\u003cp\u003e\u003cstrong\u003eThis Dalom 946-04618C deck engagement cable is a direct-fit replacement cable that reconnects the mower’s engagement lever to the deck, restoring blade engagement for compatible Cub Cadet and Troy‑Bilt riding mowers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a deck engagement cable stretches, frays, or breaks, the mower won’t reliably engage the cutting blades. The Dalom 946-04618C is built to match OEM lengths and end fittings so you can swap it in without major modification. It includes a 60‑inch inner cable, a 53‑1\/2‑inch outer conduit, a Z‑bend on one end and a spring on the other, and it’s cross‑referenced to several part numbers used by Cub Cadet and Troy‑Bilt models.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this cable fits my mower?\u003c\/h3\u003e\n\u003cp\u003eCheck the part numbers stamped on your original cable or compare cable end types and lengths. The Dalom 946‑04618C is compatible with multiple OEM references and common Cub Cadet\/Troy‑Bilt models, so it covers many standard deck engagement setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 60\" inner cable, 53-1\/2\" outer conduit\u003c\/li\u003e\n  \u003cli\u003eEnd fittings: Z‑bend on one end, coiled spring on the other\u003c\/li\u003e\n  \u003cli\u003eCross‑reference: 946‑04618, 946‑04618A\/B\/C, 746‑04618 series\u003c\/li\u003e\n  \u003cli\u003eModels: LTX1040\/1042\/1045\/1046\/1050H and Troy‑Bilt equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are needed to replace the deck engagement cable?\u003c\/h3\u003e\n\u003cp\u003eReplacing the cable is typically a straightforward mechanical job requiring basic hand tools and a few minutes of time. You’ll remove the old cable from the lever and deck mounts, route the new conduit along the same path, and fasten both ends using the existing hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: pliers, socket set, screwdriver\u003c\/li\u003e\n  \u003cli\u003eSteps: disconnect old cable, match end fittings, route conduit, secure connections\u003c\/li\u003e\n  \u003cli\u003eTip: compare lengths and bends before final fastening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build details and durability features?\u003c\/h3\u003e\n\u003cp\u003eThis replacement cable matches OEM geometry to deliver consistent engagement travel and reliable spring tension. The outer conduit protects the inner wire from abrasion and moisture while the Z‑bend and spring ensure correct mechanical connection at both attachment points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner cable length: 60 inches for full travel\u003c\/li\u003e\n  \u003cli\u003eConduit length: 53.5 inches for proper routing\u003c\/li\u003e\n  \u003cli\u003eEnd hardware: Z‑bend on one end, spring on the other for secure fit\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace worn or corroded factory cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cable restore safe blade engagement and alignment?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly, the Dalom cable restores the intended engagement travel and alignment so the deck responds as designed. It replaces stretched or broken factory cables that cause inconsistent blade engagement or failure to engage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReestablishes correct cable tension and travel\u003c\/li\u003e\n  \u003cli\u003ePrevents slipping or incomplete engagement caused by worn cables\u003c\/li\u003e\n  \u003cli\u003eHelps maintain factory deck control geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom 946‑04618C is aimed at owners and DIY mechanics of Cub Cadet and Troy‑Bilt riding mowers who need an OEM‑style deck engagement cable replacement. If your mower is listed among the compatible models or the original part number matches the cross‑references, this cable provides a cost‑effective, ready‑to‑install solution to restore deck control without extensive modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable compatible with my Cub Cadet LTX1045?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Dalom 946‑04618C matches OEM lengths and fittings for LTX1045 and other listed LTX models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the cable length and end fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The inner cable is 60 inches, conduit 53.5 inches, with a Z‑bend on one end and a spring on the other.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54194325061816,"sku":"B07KSXHCX1","price":46.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-deck-engagement-cable-front-view.jpg?v=1790573669"},{"product_id":"dalom-blade-control-cable-for-mtd-troy-bilt-craftsman-51-1-4-cable-37-3-4-conduit-z-bent-ends","title":"Dalom Blade Control Cable for MTD\/Troy-Bilt\/Craftsman — 51-1\/4\" Cable, 37-3\/4\" Conduit, Z-Bent Ends","description":"\u003cp\u003e\u003cstrong\u003eDalom 946-1113A is a direct-replacement blade control (brake) cable engineered to match the original MTD\/Troy-Bilt\/Craftsman 946-1113 series dimensions and fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement cable restores reliable blade engagement and operator safety on compatible walk-behind mowers. Manufactured to the common OEM lengths and with Z-bent ends, the Dalom cable fits models that originally used part numbers 946-1113A, 946-1113, 746-1113 and similar variants. Before ordering, verify your mower’s engine and part numbers to ensure a correct match.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mower models does this Dalom control cable fit?\u003c\/h3\u003e\n\u003cp\u003eThe Dalom 946-1113A is intended for a range of MTD-family walk-behind mowers. It is commonly used on Troy-Bilt TB200, TB210 and TB320 machines and on many Craftsman models that list 946-1113 or 746-1113 series parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: 946-1113A, 946-1113, 746-1113, 746-1113A\u003c\/li\u003e\n  \u003cli\u003eCommon Troy-Bilt fits: TB200, TB210, TB320\u003c\/li\u003e\n  \u003cli\u003eCommon Craftsman model fits: 247.37440, 247.377000, 247.377001, 247.377050, 247.377051, 247.377450\u003c\/li\u003e\n  \u003cli\u003eAlways cross-check your mower’s part number before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the cable and conduit lengths affect installation?\u003c\/h3\u003e\n\u003cp\u003eThis Dalom assembly uses the standard OEM lengths to preserve routing and lever travel. The outer conduit and inner cable lengths determine how the lever engages and how much travel is available; a mismatch can prevent proper blade control or create excess slack.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal cable length: 51-1\/4 inches for full travel\u003c\/li\u003e\n  \u003cli\u003eConduit (outer sheath) length: 37-3\/4 inches for correct routing\u003c\/li\u003e\n  \u003cli\u003eZ-bent ends match original attachment points for secure connection\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct-fit where OEM part numbers align\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during replacement and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing the control cable is generally a simple repair that restores control and safety. Remove the old cable from the handle lever and blade brake arm, then route and attach the Dalom cable in the same orientation; adjust any jam nuts or clamp points to remove slack.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes one complete 946-1113A blade control cable\u003c\/li\u003e\n  \u003cli\u003eReplace in the same routing as the original cable to avoid binding\u003c\/li\u003e\n  \u003cli\u003eInspect levers and mounting points for wear when replacing\u003c\/li\u003e\n  \u003cli\u003eLubricate pivot points and check cable action after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom 946-1113A cable is for homeowners and small-property maintenance technicians who need an OEM-dimension replacement for MTD, Troy-Bilt or Craftsman walk-behind mowers. It’s suited for users who have identified a failing or stretched blade control cable and want a direct-fit part that restores proper lever travel and safety without extensive modification. If you are unsure, verify your mower’s model and original part number to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable a direct replacement for part 946-1113?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Dalom 946-1113A matches the OEM lengths and Z-bend ends for 946-1113\/746-1113 series replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the cable and conduit lengths?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The inner cable is 51-1\/4 inches and the outer conduit is 37-3\/4 inches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54194325979320,"sku":"B07MVWLF3V","price":46.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-front-packaging-946-1113a.jpg?v=1790573688"},{"product_id":"dalom-gx390-gx340-recoil-starter-assembly-for-honda-gx390-gx340-11hp-13hp-direct-fit-pull-start-200mm-mount","title":"Dalom GX390 GX340 Recoil Starter Assembly for Honda GX390\/GX340 11HP–13HP — Direct-Fit Pull Start, 200mm Mount","description":"\u003cp\u003e\u003cstrong\u003eDalom GX390 pull-start recoil assembly is a direct-fit replacement starter for Honda GX340 and GX390 11HP–13HP engines, designed to restore smooth hand-start performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a worn or broken recoil starter leaves your generator, pressure washer, water pump or small engine without reliable starting, this Dalom assembly provides a practical replacement that matches common OEM specifications. Built to replace Honda part numbers 28400-ZE3-W02ZP, 28400-ZE3-W01ZA and 28400-ZE3-W01ZP, and compatible with aftermarket references like Oregon and Rotary, the unit is intended for GX340 (337.9cc) and GX390 (389cc) engines. The center-to-center mounting hole spacing measures 200 mm; checking dimensions and photos before purchase helps ensure fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this starter assembly restore a non-starting GX340\/GX390 engine?\u003c\/h3\u003e\n\n\u003cp\u003eThe recoil assembly replaces the pull-cord, pulley, spring and housing components that engage the engine during manual starting. Installing the assembly returns reliable rewind action and engagement with the crank, so a steady pull produces consistent turns of the engine. It’s a practical swap to avoid buying a full engine or costly OEM replacement when only the starter is failed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for specified Honda OEM numbers and several aftermarket equivalents.\u003c\/li\u003e\n  \u003cli\u003eComplete recoil unit includes pulley, rope area and spring for straightforward installation.\u003c\/li\u003e\n  \u003cli\u003eRestores proper rewind tension and engagement for dependable manual starts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engine models and fuel equipment is this compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis recoil is targeted at Honda GX340 and GX390 small engines commonly used in generators, pressure washers and pumps. It’s matched to 11HP (GX340) and 13HP (GX390) displacement ranges and the typical starter interface used on those models. Confirm your engine’s model and the OEM part number to ensure compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Honda GX340 (approximately 337.9 cc) and GX390 (approximately 389 cc).\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers 28400-ZE3-W02ZP, 28400-ZE3-W01ZA, 28400-ZE3-W01ZP.\u003c\/li\u003e\n  \u003cli\u003eAlso replaces aftermarket references such as Oregon #31-060 and Rotary #26-10379.\u003c\/li\u003e\n  \u003cli\u003eMounting hole center-to-center distance: 200 mm — verify against your housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering and how hard is installation?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure the mounting hole spacing, compare the starter face and bolt pattern to your existing part, and verify the OEM number shown on your old recoil. Installation generally requires basic hand tools, removal of the old housing and careful alignment of the new unit; springs are preassembled, reducing risk during replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm 200 mm center-to-center hole spacing before purchase.\u003c\/li\u003e\n  \u003cli\u003eCompare bolt pattern, shaft interface, and housing shape using product photos.\u003c\/li\u003e\n  \u003cli\u003eBasic mechanical skill and common tools are usually sufficient for replacement.\u003c\/li\u003e\n  \u003cli\u003eFollow engine service manual torque and safety guidance during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part match OEM performance and durability?\u003c\/h3\u003e\n\n\u003cp\u003eThe Dalom assembly is manufactured to meet the functional dimensions and engagement characteristics of the referenced OEM parts. While material and finish can vary between aftermarket and original Honda components, this unit is supplied as a complete recoil replacement intended to deliver equivalent starting action when fitted correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufactured as a full replacement recoil assembly for practical restoration of starting function.\u003c\/li\u003e\n  \u003cli\u003eMatches key OEM dimensions and engagement features for proper fitment.\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical service life in small engine applications when installed and used correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners, mechanics and equipment rental operators who need a cost-effective replacement recoil for Honda GX340 or GX390 engines — especially on portable generators, pumps, compressors and similar machines — and who can verify mounting dimensions and OEM compatibility prior to fitting. Ideal for anyone wanting to replace a broken pull starter without replacing the entire engine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this recoil fit both GX340 and GX390 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for Honda GX340 (11HP) and GX390 (13HP) engines—verify the mounting hole spacing and OEM part number before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the center-to-center mounting distance included in the spec?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The center-to-center hole spacing is 200 mm; measure your engine housing to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54194720112824,"sku":"B07GB1V5TP","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-gx390-front-assembly.jpg?v=1790578390"},{"product_id":"dalom-fs250-carburetor-kit-for-stihl-fs120-fs200-fs250-fs350-includes-ignition-coil-foam-filter","title":"Dalom FS250 Carburetor Kit for Stihl FS120\/FS200\/FS250\/FS350 — Includes Ignition Coil \u0026 Foam Filter","description":"\u003cp\u003e\u003cstrong\u003eDalom FS250 carburetor assembly is a direct-fit replacement kit built to restore fuel delivery and ignition on compatible Stihl FS series trimmers and brushcutters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl trimmer is running rough, hard to start, or not idling smoothly, this Dalom FS250 carburetor kit replaces worn fuel and ignition parts with a matched set designed for a correct fit. It’s engineered for several FS models across different production years and arrives with the most commonly needed components for a straightforward maintenance swap.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Stihl models and years will this carburetor work with?\u003c\/h3\u003e\n\u003cp\u003eThis assembly fits multiple Stihl FS series machines. Check your model and year against the list before buying to ensure compatibility. Note that some FS carburetor variants use a different throttle shaft length and are not interchangeable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: FS120, FS200, FS250, FS350.\u003c\/li\u003e\n  \u003cli\u003eModel years covered: FS200 (1997–2000), FS250 (2001–2014), FS350 (1997–2015).\u003c\/li\u003e\n  \u003cli\u003eNot interchangeable with carburetors requiring a different throttle shaft (e.g., cannot replace part 4134 120 0651).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included in the Dalom replacement kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with the essential components you typically need during a carburetor service. Including ignition and fuel system parts avoids multiple orders and helps you complete the repair in one session.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 carburetor body tailored for the FS250 fitment.\u003c\/li\u003e\n  \u003cli\u003e1 foam air filter, 1 ignition coil, and 1 spark plug to refresh ignition components.\u003c\/li\u003e\n  \u003cli\u003e2 gaskets and 1 primer bulb for fuel sealing and priming the system before start-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the fuel connections and dimensions match my trimmer?\u003c\/h3\u003e\n\u003cp\u003eDalom designed the inlet and return fittings to mirror the original equipment dimensions so hoses seat properly. Confirm hose diameters on your machine to prevent mismatched connections that could cause leaks or poor fuel flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel inlet hole diameter: 16 mm, ensures proper seating into the machine’s mount.\u003c\/li\u003e\n  \u003cli\u003eFuel inlet pipe outer diameter: 4 mm; return pipe outer diameter: 3 mm for correct hose fit.\u003c\/li\u003e\n  \u003cli\u003eThrottle cable wheel is configured in a straight-through orientation for the FS250 variant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this carburetor replace specific OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eThe Dalom assembly is intended to replace several common Stihl part numbers, making it easier to match the right component when your original part is worn or unavailable. Verify your old part number to confirm the correct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarburetor replaces Stihl part 4134 120 0652.\u003c\/li\u003e\n  \u003cli\u003eIncludes ignition coil that replaces 4134 400 1301 and foam filter for 4134 141 0300.\u003c\/li\u003e\n  \u003cli\u003eReminder: not all carburetor variants are interchangeable—check shaft length and model fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom FS250 carburetor kit is aimed at homeowners, landscapers, and small-engine mechanics who maintain Stihl FS-series trimmers and brushcutters. If you’re comfortable with basic engine service—removing the old carburetor, swapping hoses, and replacing a spark plug—this kit supplies the commonly replaced parts in a single package to get your machine back to reliable operation. Always compare part numbers and physical dimensions with your existing components before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this replace a Stihl part 4134 120 0652?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Dalom carburetor is intended to replace Stihl 4134 120 0652 when the model and shaft length match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include ignition components?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes an ignition coil, spark plug, foam filter, primer bulb, and gaskets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54194962563256,"sku":"B07K9XCTTH","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-fs250-carburetor-front-view.jpg?v=1790580411"},{"product_id":"dalom-tb22ec-carburetor-replacement-for-troy-bilt-tb22-tb32-tb80-tb2040xp-preassembled-gasket-kit","title":"Dalom TB22EC Carburetor replacement for Troy-Bilt TB22 TB32 TB80 TB2040XP — preassembled, gasket kit","description":"\u003cp\u003e\u003cstrong\u003eDalom TB22EC carburetor is a direct-fit replacement designed to restore fuel delivery and performance on a wide range of Troy-Bilt, MTD, Craftsman and compatible string trimmers and tillers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your two-stroke outdoor tool is running rough, drowning under load, refusing to idle, or leaking fuel, the carburetor is often the root cause. The Dalom TB22EC replaces several OEM part numbers (including 753-06190, 751-14840, 951-14840 and compatible Walbro models) and fits many TB-series Troy-Bilt units plus selected Remington, Bolens, Murray and Yard-Man machines. It arrives pre-assembled to simplify installation and returns consistent fuel\/air metering for better starts and steadier throttle response.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis Dalom TB22EC unit was engineered to match the mounting, linkage and fuel port layout of numerous small-engine brands. It fits Troy-Bilt TB21EC, TB22, TB22EC, TB32EC, TB42EC, TB80EC and TB2040XP trimmers, and also works with many remanufactured models from MTD, Craftsman, Remington, Bolens and Yard-Man where the OEM part numbers align.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers: 753-06190, 751-14840, 951-14840.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Walbro series: WT-973, WT-973-1, WT-1116.\u003c\/li\u003e\n  \u003cli\u003eFits select Remington, Murray, Bolens, Yard-Man and Craftsman models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this part affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eA properly matched carburetor restores the correct fuel-to-air ratio, which improves cold starts, steadier idle and stronger throttle response under load. While results depend on overall engine condition and tune, replacing a worn or clogged carburetor often eliminates stalling and uneven revving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter starting with fewer prime cycles and pulls.\u003c\/li\u003e\n  \u003cli\u003eSmoother throttle transitions and less bogging while cutting.\u003c\/li\u003e\n  \u003cli\u003eReduced fuel leaks and more consistent idling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes with the replacement and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThe Dalom TB22EC arrives as a ready-to-install carburetor that includes gaskets and the standard mounting stud locations needed for direct replacement in compatible units. Basic mechanical skills and common hand tools are sufficient for swap-out; many users complete the job in under an hour.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreassembled carburetor body with standard seal\/gasket set.\u003c\/li\u003e\n  \u003cli\u003eNo specialized tools required—screwdrivers and pliers typically suffice.\u003c\/li\u003e\n  \u003cli\u003eFollow a model-specific diagram or service manual for linkage alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fix starting issues on an older trimmer?\u003c\/h3\u003e\n\u003cp\u003eReplacing a malfunctioning carburetor often resolves aging-related starting and performance problems caused by varnished jets, degraded diaphragms, or damaged gaskets. If the ignition, fuel lines and air filter are in good condition, swapping in this Dalom unit is a common and cost-effective repair path.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps when engines flood, fail to idle, or surge unexpectedly.\u003c\/li\u003e\n  \u003cli\u003eCombine with fresh fuel and a clean air filter for best results.\u003c\/li\u003e\n  \u003cli\u003eInspect ignition and compression if problems persist after replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom TB22EC carburetor is aimed at DIY homeowners, landscapers and small-engine repair shops needing an economical, cross-compatible replacement for Troy-Bilt TB-series trimmers and other compatible brands. Choose this part when your trimmer exhibits fuel-delivery symptoms and you want a direct-fit replacement that matches common OEM and Walbro part numbers without a full engine overhaul.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor replace part number 753-06190?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Dalom TB22EC is designed to replace 753-06190 and related OEM numbers listed in the product compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this without specialized tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Basic hand tools and common mechanical skills are typically all you need for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54195032162488,"sku":"B07BTXJHNC","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-tb22ec-front-view.jpg?v=1790581127"},{"product_id":"dalom-ignition-coil-magneto-armature-398811-7-16hp-single-cylinder-replacement-oem-fit","title":"Dalom Ignition Coil Magneto Armature 398811 — 7–16HP Single-Cylinder Replacement, OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eDalom 398811 ignition coil magneto armature is a direct-replacement ignition module designed to fit a range of 7–16HP single-cylinder horizontal and vertical engines compatible with OEM numbers 395492, 395326, 398811, and 398265.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a reliable replacement armature for lawn, garden, or utility engines, this Dalom module offers a straightforward swap for many common small engines. It’s engineered to match mounting geometry and electrical connections of the listed OEM parts, so you can restore ignition functionality without modifying the engine. Before ordering, confirm your engine’s model and part number to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engine models and series will this Dalom armature fit?\u003c\/h3\u003e\n\u003cp\u003eThis ignition coil replaces several OEM part numbers and is compatible with multiple small-engine model families. It supports both horizontal and vertical shaft single-cylinder engines within the 7–16HP range and specific listed model series.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM parts: 395492, 395326, 398811, 398265.\u003c\/li\u003e\n  \u003cli\u003eFits engine models: 190701, 190702, 190707, 170401, 170402, 170403, 170407, 170412, 170417, 170431, 170432, 192404, 192407, 192412, 253412, 253417.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 19K400 (0110–0115), 19E400 (0069–1168), 19F400 (0043–1137), 19G400 (0068–1196) series.\u003c\/li\u003e\n  \u003cli\u003eWorks with single-cylinder 7–16HP horizontal and vertical shaft engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this part matches my engine before buying?\u003c\/h3\u003e\n\u003cp\u003eMatching the armature requires checking your engine’s model plate and the OEM part number of the original ignition coil. Look for the part number stamped on the old module or consult the engine’s manual to avoid ordering the wrong piece.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLocate OEM part number on the old coil or engine manual.\u003c\/li\u003e\n  \u003cli\u003eCompare mounting holes and lead connector positions visually.\u003c\/li\u003e\n  \u003cli\u003eVerify engine series (e.g., 19K400, 19E400) and model code ranges listed above.\u003c\/li\u003e\n  \u003cli\u003eContact a parts dealer with your engine model if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and compatibility considerations?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a bolt-on swap, but procedures vary by engine. Ensure the ignition gap, flywheel alignment, and grounding are set according to your engine’s service manual for reliable performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the engine manual for correct air-gap and torque specs.\u003c\/li\u003e\n  \u003cli\u003eEnsure proper orientation of the mounting flange and connector leads.\u003c\/li\u003e\n  \u003cli\u003eInspect flywheel key and magnet alignment before final assembly.\u003c\/li\u003e\n  \u003cli\u003eTest spark and wiring insulation after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of part quality and replacement fit?\u003c\/h3\u003e\n\u003cp\u003eDalom supplies aftermarket ignition components manufactured to match OEM dimensions and connection points. While not an original manufacturer part, this armature is designed for direct replacement without machining or trimming when the correct model and part numbers are confirmed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match OEM mounting and electrical layout.\u003c\/li\u003e\n  \u003cli\u003eSupplies the standard coil and armature assembly for specified engines.\u003c\/li\u003e\n  \u003cli\u003eIntended as a bolt-on alternative to the listed OEM numbers.\u003c\/li\u003e\n  \u003cli\u003eDouble-check part compatibility to prevent returns or fitment issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Dalom ignition coil magneto armature is for DIY mechanics, small-engine repair shops, and equipment owners who need a like-for-like replacement for engines in the 7–16HP range. It suits those who can identify their engine model and OEM part number and want a ready-to-install aftermarket ignition module for lawnmowers, generators, pressure washers, and similar single-cylinder engines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIgnition Coil Module Replaces OEM parts: 395492, 395326, 398811, 398265 armature magneto\u003c\/li\u003e\n  \u003cli\u003eFits 7-16HP Horizontal \u0026amp; Vertical Single Cylinder Engines\u003c\/li\u003e\n  \u003cli\u003eFit Models: 190701, 190702, 190707, 170401, 170402, 170403, 170407, 170412, 170417, 170431, 170432, 192404, 192407, 192412, 253412, 253417\u003c\/li\u003e\n  \u003cli\u003eFit for 19K400 Series (0110-0115) Engine 19E400 Series (0069-1168) Engine 19F400 Series (0043-1137) Engine 19G400 Series (0068-1196) Engine\u003c\/li\u003e\n  \u003cli\u003eTo avoid purchasing the wrong engine parts, it's important to double-check your engine's model and part numbers prior to making your purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this Dalom part replace OEM 395492 and 395326?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed to replace OEM part numbers 395492 and 395326 when matched to compatible engine models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this armature fit my 12HP single-cylinder engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 12HP engine is within the listed 7–16HP horizontal or vertical single-cylinder series and matches the model codes, it should fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54195061883064,"sku":"B07FKFNZND","price":54.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-armature-front-view.jpg?v=1790581447"},{"product_id":"dalom-recoil-starter-assembly-for-troy-bilt-tb110-tb200-140cc-briggs-stratton-compatible-complete-kit-with-rope-spring","title":"Dalom Recoil Starter Assembly for Troy-Bilt TB110\/TB200 - 140cc Briggs \u0026 Stratton Compatible, Complete Kit with Rope \u0026 Spring","description":"\u003cp\u003e\u003cstrong\u003eDalom 591139 is a complete recoil starter assembly designed to replace worn pull-start units on Troy-Bilt TB110\/TB200 and compatible Briggs \u0026amp; Stratton 140CC engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a lawn mower won't start because the pull rope pulls loose, the spring is weak, or the housing is cracked, swapping in a full recoil starter assembly restores dependable manual starting. This Dalom unit replaces OEM parts 591139, 593959, 593961 and 590588 and includes the rewind guard, plastic housing, pulley, starter spring, and pull rope with grip so you get all required pieces in one package.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models will this recoil starter fit?\u003c\/h3\u003e\n\u003cp\u003eIt fits a range of small engines commonly used on walk-behind mowers. Check the engine code and part numbers on your mower to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Troy-Bilt models such as TB110, TB115, TB200 and TB554.\u003c\/li\u003e\n  \u003cli\u003eFits Briggs \u0026amp; Stratton 140CC series: BS 450E, 500E, 550E, 575E and related codes.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OEM part numbers: 591139, 593959, 593961, 590588.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the Dalom recoil starter?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic mower maintenance. You’ll remove the old starter housing, transfer or replace mounting screws, and secure the new assembly to the engine—no specialized tools required for most models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes as an assembled unit to speed up installation.\u003c\/li\u003e\n  \u003cli\u003eReplaces the original mounting pattern—align then secure with existing bolts.\u003c\/li\u003e\n  \u003cli\u003eIncludes rope and grip so you don’t need to reuse worn components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is supplied as a complete rewind kit so you won’t need to buy separate pieces. The housing is durable plastic, the pulley and spring are metal, and the rope includes a molded grip for comfortable pulls.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic housing protects internal parts from debris and weather.\u003c\/li\u003e\n  \u003cli\u003eMetal starter pulley and spring for reliable retraction and tension.\u003c\/li\u003e\n  \u003cli\u003ePreinstalled pull rope with molded grip for secure, ergonomic use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I be sure I’m ordering the correct part?\u003c\/h3\u003e\n\u003cp\u003eBecause small-engine parts vary by engine code, always verify the part and engine numbers stamped on your mower. If in doubt, compare the old starter’s mounting bolt pattern and overall shape with photos and measurements of the replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm engine model and part number from your mower’s decal or manual.\u003c\/li\u003e\n  \u003cli\u003eCompare mounting hole positions and overall starter diameter before purchase.\u003c\/li\u003e\n  \u003cli\u003eContact seller with photos if you need additional fitment confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Dalom recoil starter assembly is aimed at DIY lawn mower owners, small engine repair shops, and maintenance professionals who need an economical, full replacement for failed pull-start units. If your mower uses a 140CC Briggs \u0026amp; Stratton-style engine or the listed Troy-Bilt models and you want a ready-to-install kit that includes the rope, grip, spring and housing, this product offers a practical way to restore manual starting without sourcing individual components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my Troy-Bilt TB110 mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Dalom 591139 is compatible with Troy-Bilt TB110 models, but confirm your mower’s engine and part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the rope and spring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the assembly includes the pull rope with grip, starter pulley, starter spring, housing, and rewind guard.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54195104317624,"sku":"B07XJ2PXSL","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-recoil-starter-front-assembly.jpg?v=1790581875"},{"product_id":"dalom-carburetor-kit-for-poulan-craftsman-25cc-blower-bvm200fe-direct-fit-with-primer-bulb-spark-plug","title":"Dalom Carburetor Kit for Poulan Craftsman 25cc Blower — BVM200FE Direct-Fit with Primer Bulb \u0026 Spark Plug","description":"\u003cstrong\u003eDalom Carburetor Kit bvm200fe is a complete replacement set designed to restore fuel delivery and starting performance for Poulan and Craftsman 25cc leaf blowers.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Poulan or Craftsman handheld blower is hard to start, runs roughly, or stalls, a worn carburetor or aging fuel components are often the cause. This Dalom kit supplies a direct-fit carburetor plus the small parts commonly needed for a reliable repair. The components match Poulan part numbers and Zama W43-series carburetors used in many 25cc blowers, giving you the parts to return the engine to stable operation without buying a full new unit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and part numbers will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe Dalom bvm200fe carburetor kit is built to be compatible with multiple Poulan and Craftsman blower models that use the Zama W43-family carburetors. It lists compatibility with Poulan part number 545081857 and fits common Craftsman 25cc blower spare part references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Poulan 545081857 and Zama C1U-W43 \/ C1U-W43B \/ C1U-W43C variants\u003c\/li\u003e\n  \u003cli\u003eWorks with Craftsman 25cc blowers and many Poulan Pro BVM200FE \/ GBV345 models\u003c\/li\u003e\n  \u003cli\u003eMatches a range of Craftsman part numbers including 358794770 series and 944518250\/252\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the carburetor plus the small fuel-system parts that typically fail first after years of use. Including these extras means you can fully refresh the fuel path and ignition connections during one repair session.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x replacement carburetor matched to W43-style systems\u003c\/li\u003e\n  \u003cli\u003e1x fuel filter and 2x fuel lines to clear clogged passages\u003c\/li\u003e\n  \u003cli\u003e1x primer bulb, 2x gaskets, and 1x spark plug for a full tune-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install this kit and avoid compatibility mistakes?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard small-engine carburetor replacement steps: remove the airbox, disconnect the fuel lines, swap the carburetor and gaskets, then reconnect fuel and throttle linkages. To prevent ordering the wrong parts, verify your engine and original part numbers before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off fuel and drain remaining gas before disassembly\u003c\/li\u003e\n  \u003cli\u003eMatch the old carburetor’s mounting, throttle, and choke linkages to the new unit\u003c\/li\u003e\n  \u003cli\u003eReplace gaskets and fuel filter, then test for leaks and proper idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance changes should I expect after replacing the carburetor?\u003c\/h3\u003e\n\u003cp\u003eAfter installing the Dalom carburetor kit, you should notice easier starting, steadier idling, and more consistent power delivery if the old carburetor or fuel parts were degraded. Results depend on overall engine condition and proper installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother starts when primer bulb and spark plug are fresh\u003c\/li\u003e\n  \u003cli\u003eReduced stalling and more predictable throttle response\u003c\/li\u003e\n  \u003cli\u003eCleaner fuel flow thanks to the included filter and new lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Dalom bvm200fe carburetor kit is intended for DIY homeowners, landscapers, and small-engine technicians who need an affordable, drop-in replacement for Poulan and Craftsman 25cc handheld blowers. It’s ideal when fuel-related symptoms (hard starting, sputtering, rough idle) point to carburetor or fuel-part failure, and when the machine’s model and part numbers match the listed compatibility. Always confirm your blower’s model and part references before ordering to ensure fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor a direct replacement for Poulan 545081857?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Dalom bvm200fe is designed to fit Poulan 545081857 and W43-series carburetors used in many 25cc models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes carburetor, fuel filter, primer bulb, two fuel lines, two gaskets, and a spark plug for a full basic replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54195209928888,"sku":"B07MVVVSLH","price":56.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-carburetor-front-view_5a3503ac-f690-4e2b-a2cf-66a4436e74c6.jpg?v=1790582511"},{"product_id":"dalom-ignition-coil-module-for-stihl-021-023-ms210-ms230-ms250-square-mount-restores-spark","title":"Dalom Ignition Coil Module for Stihl 021 023 MS210 MS230 MS250 - Square Mount, Restores Spark","description":"\u003cp\u003e\u003cstrong\u003eDalom MS250 Ignition Coil Module is a direct-replacement magneto that restores spark performance for compatible Stihl 021, 023, MS210, MS230 and MS250 chainsaws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Stihl chainsaw suffers from weak or intermittent ignition, this Dalom ignition coil module is designed as a practical replacement part to get your engine firing consistently again. The module matches the square-type mounting and terminal layout used by a range of mid-size Stihl two-stroke saws, and it ships as a single unit ready for installation. It is sold with a short-term return policy and is intended for users comfortable with basic small-engine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this ignition coil improve my saw's starting and running?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a faulty coil restores high-voltage spark output to the spark plug, which directly affects starting reliability and steady idle. A healthy coil helps eliminate misfires and rough running caused by weak or no spark, allowing the engine to reach and hold RPM more predictably.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores proper spark strength for quicker starts\u003c\/li\u003e\n  \u003cli\u003eReduces stalls and misfires under load\u003c\/li\u003e\n  \u003cli\u003eCompatible with specific Stihl models noted for correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Stihl models does this Dalom coil fit and what should I check before ordering?\u003c\/h3\u003e\n\n\u003cp\u003eThis coil fits Stihl model numbers 021, 023, MS210, MS230 and MS250 that use a square-type ignition coil. Before purchase, confirm your saw uses the square coil pattern and compare mounting hole spacing and plug lead orientation to ensure compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits: 021, 023, MS210, MS230, MS250 chainsaws\u003c\/li\u003e\n  \u003cli\u003eNot compatible with part number 0000-400-1306\u003c\/li\u003e\n  \u003cli\u003eType: square-style coil — verify against your saw's existing unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation and what tools or steps are typical?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for someone familiar with chainsaw maintenance: remove the clutch cover and flywheel shroud, disconnect the old coil's wires, unbolt the unit, and replace with the Dalom module. Basic hand tools, a flywheel puller in some cases, and attention to ignition timing\/air gap are commonly required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: screwdriver, socket set, possible flywheel puller\u003c\/li\u003e\n  \u003cli\u003eSteps: remove cover, disconnect wires, unbolt old coil, mount new coil, set air gap\u003c\/li\u003e\n  \u003cli\u003eVerify ignition timing and reassemble before testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the purchase include and what is the return policy?\u003c\/h3\u003e\n\n\u003cp\u003eThe package contains one Dalom ignition coil module as pictured. Dalom offers a 3-month hassle-free return and money-back policy if the part is defective or does not meet compatibility expectations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContents: 1 pc ignition coil module\u003c\/li\u003e\n  \u003cli\u003eWarranty: 3-month return and refund policy\u003c\/li\u003e\n  \u003cli\u003eCheck fitment against your saw before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom MS250 ignition coil module is aimed at home users, professional landscapers and small-engine repairers who need a reliable replacement for square-type coils on Stihl 021\/023\/MS210\/MS230\/MS250 chainsaws. It’s best for people who can verify compatibility, perform basic disassembly and set the correct air gap, or who have access to a mechanic. If you need the round-type coil or have part number 0000-400-1306, this unit is not suitable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coil compatible with Stihl MS250?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits Stihl MS250 and other square-type coils like 021, 023, MS210 and MS230—confirm your saw uses a square coil pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if it doesn't fit my saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dalom offers a 3-month hassle-free return and refund—verify model compatibility first and contact support if you need help.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54195569459384,"sku":"B07GB3M2BK","price":54.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-ignition-coil-front-view.jpg?v=1790584319"},{"product_id":"dalom-carburetor-for-troy-bilt-string-trimmers-753-06190-direct-fit-walbro-wt-973-compatible","title":"Dalom carburetor for Troy-Bilt string trimmers 753-06190 — direct-fit, Walbro WT-973 compatible","description":"\u003cp\u003e\u003cstrong\u003eThe Dalom 753-06190 carburetor is a direct-fit replacement designed to restore reliable fuel delivery for Troy-Bilt and many compatible two-stroke string trimmers and brushcutters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your trimmer is hard to start, stalls under load, or runs unevenly, the carburetor is often the cause. This Dalom unit replaces OEM part numbers such as MTD\/Troy-Bilt 753-06190, 751-14840, 951-14840 and is compatible with Walbro WT-973\/WT-1116 types. It fits a wide range of string trimmers, brushcutters and small garden engines from Troy-Bilt, Remington, Bolens, Craftsman, Murray and several Yard-Man models, making it a versatile service part for homeowners and repair shops.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models will this Dalom carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis carburetor was built to match the mounting pattern, throttle linkage, and fuel ports used on many popular two-stroke trimmers. It fits Troy-Bilt TB21EC, TB22, TB22EC, TB32EC, TB42EC, TB80EC and TB2040XP models, along with Remington, Bolens, Murray, Craftsman and Yard-Man models that use equivalent Walbro designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for MTD\/Troy-Bilt part numbers 753-06190, 751-14840, 951-14840.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Walbro WT-973, WT-973-1, WT-1116 pattern carburetors.\u003c\/li\u003e\n  \u003cli\u003eFits multiple Remington RM series, Bolens BL series, Craftsman trimmers, and Yard-Man models listed in the product specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and initial setup work?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with small engine maintenance. The unit uses the same bolt pattern and fuel inlet orientation as the original, so it bolts on without modification; you may need to transfer the choke lever or throttle linkage from the old carburetor. Dalom units are shipped with a randomly included adjustment tool to help set the idle and mixture screws for best performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove old carburetor, transfer linkage and gaskets as needed.\u003c\/li\u003e\n  \u003cli\u003eMount Dalom unit using original bolts; connect fuel line and throttle linkage.\u003c\/li\u003e\n  \u003cli\u003eUse included adjustment tool to set idle and mixture according to engine manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements should I expect?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or gummed-up carburetor typically restores consistent starting, smooth idling and steady throttle response. While this part revitalizes fuel metering and air\/fuel balance, optimal results depend on clean fuel, a fresh spark plug, and proper air filter condition. Do not expect changes beyond restoring factory-like performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother idle and reduced stalling under light load.\u003c\/li\u003e\n  \u003cli\u003eImproved throttle response and easier cold starts when adjusted correctly.\u003c\/li\u003e\n  \u003cli\u003eConsistent fuel delivery for steadier running during trimming jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this replacement is for: homeowners, lawn-care pros, and small-engine technicians who need an affordable, OEM-compatible carburetor to repair Troy-Bilt and other two-stroke trimmers. Choose this Dalom carburetor if your machine shows starting trouble, surging, or poor throttle response and you want a direct-fit replacement that matches the Walbro-style mounting and tuning arrangement. Before ordering, confirm your engine and original part numbers to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor a direct replacement for Troy-Bilt 753-06190?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It replaces MTD\/Troy-Bilt 753-06190 and equivalent Walbro WT-973\/WT-1116 pattern units.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need extra parts to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no—most installs use existing gaskets and linkages, but check and replace worn gaskets or fuel lines as needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54195810926776,"sku":"B07BTTFTVS","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-carburetor-front-view_6a741bd8-e18d-4cab-a8e6-0fadad2204ea.jpg?v=1790585764"},{"product_id":"dalom-trimmer-line-105-inch-2-7mm-690ft-heavy-duty-twisted-weed-wacker-string-3-lb-spool-weld-resistant-quiet-cut","title":"Dalom Trimmer Line .105-Inch (2.7mm) 690ft Heavy-Duty Twisted Weed Wacker String 3 lb Spool — Weld-Resistant, Quiet Cut","description":"\u003cstrong\u003eDalom’s .105-inch twisted heavy-duty trimmer line is a 3 lb, 690-foot spool engineered to cut thick weeds and overgrowth cleanly while resisting head weld and noise.\u003c\/strong\u003e\n\n\u003cp\u003eWhether you tackle backyard roughs, overgrown lots, or perimeter edging, this Dalom trimmer line balances toughness and precision. The .105-inch (2.7 mm) diameter gives enough mass to slice through denser vegetation, while the twisted geometry forms sharp cutting edges that maintain a straight, clean cut. It ships with a cutting tool and is sized to fit most consumer and professional heads from common brands.\u003c\/p\u003e\n\n\u003ch3\u003eHow does twisted .105-inch line improve cutting performance?\u003c\/h3\u003e\n\u003cp\u003eThe twisted profile gives the line distinct cutting edges that shear stems instead of shredding them, creating faster, cleaner results. Because the shape reduces drag, it runs cooler and quieter than many multi-faceted or serrated lines, extending motor life and reducing user fatigue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharp, knife-like edges for efficient slicing\u003c\/li\u003e\n  \u003cli\u003eLower drag for cooler operation and reduced noise\u003c\/li\u003e\n  \u003cli\u003eConsistent cutting path for tidy edges around beds and fences\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this line fit my trimmer head and what brands is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eAt .105 inches (2.7 mm), this spool fits most consumer and many pro trimmer heads that accept .105\" cord. Dalom’s line works with a wide range of makes and models when your head accepts that diameter, offering an easy swap for frequent users and landscapers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Ryobi, Echo, Stihl, Black \u0026amp; Decker, Poulan, Craftsman heads\u003c\/li\u003e\n  \u003cli\u003eWorks in both bump-feed and fixed-head setups sized for .105\" line\u003c\/li\u003e\n  \u003cli\u003eIncludes ample length (690 ft) to rewind many times before replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this heavy-duty .105\" line and how do I prevent it bonding in the head?\u003c\/h3\u003e\n\u003cp\u003eDalom selected a weld-resistant outer formulation and a robust core to limit line weld and premature snapping. The thicker .105\" diameter is less prone to breaking on thick stalks and offers longer life in durable environments like brush and heavy grass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWeld-resistant outer layer reduces line fusing in the head\u003c\/li\u003e\n  \u003cli\u003eHeavy 3 lb spool provides long runtime between replacements\u003c\/li\u003e\n  \u003cli\u003eTwist geometry helps reduce breakage and maintain even wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and load the line for best results?\u003c\/h3\u003e\n\u003cp\u003eHydrating the nylon improves flexibility and reduces breakage during initial use. Dalom recommends soaking the pre-cut or wound line in water for about 24 hours before loading it into the reel; this increases elasticity for smoother feeding and fewer jams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoak wound or cut line 24 hours before loading to increase elasticity\u003c\/li\u003e\n  \u003cli\u003eFollow your trimmer head’s winding pattern and secure ends to prevent unraveling\u003c\/li\u003e\n  \u003cli\u003eUse the included cutting tool to size replacement lengths quickly and accurately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Landscapers, homeowners with large yards, and anyone who needs a dependable, long-length trimmer line for regular clearing and edging. If you need a blend of cutting power and quieter operation with fewer head weld issues, this Dalom .105\" twisted line delivers the durability and manageability demanded by heavier-duty trimming tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is .105-inch trimmer line good for heavy weeds?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. .105\" (2.7 mm) offers enough thickness to handle heavier weeds and overgrowth while remaining manageable in most consumer trimmer heads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to soak the line before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Recommended: soaking the line about 24 hours increases elasticity for smoother feeding and fewer breaks during initial use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54199607820472,"sku":"B08LH5Z8BH","price":81.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-trimmer-line-front-spool.jpg?v=1790596913"},{"product_id":"dalom-carburetor-kit-for-stihl-br340-br380-br420-sr340-backpack-blowers-complete-tune-up-parts-carb-filters-gaskets","title":"Dalom carburetor kit for Stihl BR340 BR380 BR420 SR340 backpack blowers — complete tune-up parts (carb, filters, gaskets)","description":"\u003cstrong\u003eDalom BR340\/BR380\/BR420\/SR340 carburetor kit is a complete replacement set designed to fit Stihl backpack blowers and restore reliable fuel delivery and running performance.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Stihl BR or SR series blower is showing hard starting, uneven idling, or poor throttle response, this Dalom carburetor kit supplies the main mechanical parts to rebuild the fuel system. The kit contains a carburetor matched to common Stihl models plus the essential consumables—air filter, fuel filter, grommet, fuel line, spark plug and gaskets—so you can replace all wear items in one service session.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this kit fits my Stihl backpack blower?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is based on carburetor and mounting dimensions and cross-referenced Stihl part numbers. This Dalom kit is built to replace several Walbro and Stihl carburetor variants commonly found on BR and SR series blowers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits models: BR420, BR340, BR380, SR340, SR380, SR420, BR340L and BR420C.\u003c\/li\u003e\n\u003cli\u003eReplaces Walbro HD-4A, HD-4B, HD-13B and Stihl part numbers 4203-120-0601, 4203-120-0603, 4203-120-0605, 4203-120-0607.\u003c\/li\u003e\n\u003cli\u003eKey dimensions: mounting hole center-to-center 31mm, throttle\/choke bore 19mm, venturi 15mm, fuel inlet 4mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what maintenance tasks can I complete with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the carburetor plus fresh consumables so you can complete a full fuel and ignition tune-up. It’s ideal for replacing worn seals, clogged filters or a faulty carburetor body without sourcing multiple parts separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded: 1 carburetor, 1 foam air filter (5-1\/8\" x 3-1\/2\" x 1-1\/2\"), 1 fuel filter, 1 fuel tank grommet, 1 fuel line, 1 spark plug and 3 gaskets.\u003c\/li\u003e\n\u003cli\u003eTasks: swap carburetor, replace air and fuel filters, fit new gaskets and grommet, renew spark plug and fuel hose.\u003c\/li\u003e\n\u003cli\u003eHelpful tip: verify your engine model and part numbers before installation to avoid mismatch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will the dimensional specs affect installation and performance?\u003c\/h3\u003e\n\u003cp\u003eMatching bore sizes and mounting spacing ensures the carburetor seals properly and aligns with throttle and choke linkages. The listed dimensions make this unit a direct-fit replacement for compatible Stihl blowers, preserving proper airflow and fuel metering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle and choke bores: 19mm for correct airflow passage and linkage alignment.\u003c\/li\u003e\n\u003cli\u003eVenturi diameter: 15mm to maintain expected fuel\/air mixing characteristics.\u003c\/li\u003e\n\u003cli\u003eMounting holes: 31mm center-to-center for a secure, vibration-resistant mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before and after installing the kit?\u003c\/h3\u003e\n\u003cp\u003ePre-install inspection and post-install adjustments help avoid common issues like leaks or rough idle. Follow general small-engine service practices and test the blower through its full throttle range after installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBefore installing: confirm model compatibility, inspect intake manifold and linkage for damage, and drain old fuel if contaminated.\u003c\/li\u003e\n\u003cli\u003eAfter installing: check for fuel leaks, set idle and mixture per manufacturer guidance, and run the engine to warm operating temperature to verify stable performance.\u003c\/li\u003e\n\u003cli\u003eKeep basic hand tools and a service manual or model-specific diagram for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom BR340\/BR380\/BR420\/SR340 carburetor kit is intended for DIY mechanics, landscape professionals, and equipment repair shops maintaining Stihl BR and SR series backpack blowers. It’s suited to anyone needing a cost-effective, complete replacement package to restore starting, idling and throttle response without sourcing individual parts separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this Dalom carburetor kit fit my Stihl BR420?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is designed to fit BR420 and compatible Stihl\/Walbro carburetor variants; verify part numbers and mounting dimensions before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include all parts needed for a full carburetor rebuild?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes the carburetor, air and fuel filters, grommet, fuel line, spark plug and three gaskets for a comprehensive service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54199819468984,"sku":"B07FF3KSXM","price":65.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-carburetor-front-view_eb4b9cb0-e106-4302-9deb-c2e97d9a5cfb.jpg?v=1790600658"},{"product_id":"dalom-carburetor-for-predator-420cc-generators-13-16hp-direct-fit-with-gaskets-fuel-shut-off","title":"Dalom Carburetor for Predator 420cc Generators — 13–16HP Direct-Fit with Gaskets \u0026 Fuel Shut-Off","description":"\u003cp\u003e\u003cstrong\u003eThe Dalom 8750 carburetor is a direct-fit replacement designed to restore fuel delivery and idle performance on Predator 420cc portable generators and many Honda-style 389–420cc engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a generator runs rough, floods, or won’t hold a steady idle, the carburetor is often the culprit. This Dalom unit is made to work with a wide range of 13–16 HP RATO and Honda-style engines used in Harbor Freight Predator models (7000–8750 watt class) and several other imports, so you can replace the part yourself with minimal downtime. The package includes common wearable parts to simplify installation and get the unit back on the job quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich generators and engine models will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis carburetor is compatible with many Predator-branded portable generators that use the 420cc RATO R420-III engine, plus several Honda-style and aftermarket generator models. Confirm your engine or model number before ordering to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePredator 7000 \/ 8750 watt models using 420cc, 13–16 HP engines\u003c\/li\u003e\n  \u003cli\u003eHarbor Freight SKUs: 69671, 68530, 68525, 69672, 69674, 68529, 68526\u003c\/li\u003e\n  \u003cli\u003eHonda-style GX340\/GX390 replacement applications (manual choke)\u003c\/li\u003e\n  \u003cli\u003eVarious DuroPower, All Power America, Generac and Honeywell models listed for 389–420cc engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what’s included in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic small-engine maintenance: remove the old carburetor, transfer or replace gaskets, and connect fuel and throttle linkages. The kit bundles commonly needed spare parts to reduce trips to the hardware store.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes one carburetor plus three gaskets for proper sealing\u003c\/li\u003e\n  \u003cli\u003eComes with a replacement spark plug and air filter for a broader tune-up\u003c\/li\u003e\n  \u003cli\u003eSupplied fuel shut-off valve to replace worn or leaking petcocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms does a failing carburetor cause and how will this one help?\u003c\/h3\u003e\n\u003cp\u003eA worn or clogged carburetor can cause hard starting, surging, poor idle, excessive fuel smell, or low power under load. Installing a fresh carburetor restores consistent fuel flow and helps the engine run smoother when matched correctly to the engine model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves idle stability and reduces stalling after warm-up\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate flooding and excessive fuel leakage from old components\u003c\/li\u003e\n  \u003cli\u003eRestores proper throttle response and load performance when tuned\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any fitment cautions or maintenance tips I should know?\u003c\/h3\u003e\n\u003cp\u003eNot all 389–420cc carburetors are identical; differences in choke type, manifold angle, and throttle linkage can affect compatibility. Always verify your engine model and inspect mounting surfaces and linkages before final installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck whether your engine uses a manual choke (this unit is for manual choke setups)\u003c\/li\u003e\n  \u003cli\u003eCompare bolt spacing, intake port shape, and throttle linkage to the old unit\u003c\/li\u003e\n  \u003cli\u003eReplace old gaskets and clean the intake manifold before mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Dalom 8750 carburetor is ideal for DIY mechanics, fleet maintainers, and homeowners who own Predator-series or compatible 420cc portable generators and need an affordable replacement. If you want a kit that includes the small parts commonly replaced with the carburetor—gaskets, a spark plug, air filter, and a fuel shut-off valve—this package simplifies the repair and gets your generator back in service faster. Always double-check engine and model numbers to ensure the correct fit before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor fit my Predator 8750 generator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Predator 7000\/8750 models with the 420cc RATO R420-III engine; verify your engine or model number before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the small parts needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains one carburetor, three gaskets, a spark plug, air filter, and a fuel shut-off valve.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54199848796344,"sku":"B07MVW593Y","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-carburetor-front-view_4f2f4f3d-4184-4d00-ad1b-a7432604d2b9.jpg?v=1790601134"},{"product_id":"dalom-br-600-carburetor-kit-for-stihl-br600-br700-replacement-for-zama-c1q-s184-with-filter-spark-plug-lines","title":"Dalom BR 600 Carburetor Kit for Stihl BR600 BR700 — Replacement for Zama C1Q-S184 with Filter, Spark Plug \u0026 Lines","description":"\u003cp\u003e\u003cstrong\u003eThe Dalom BR 600 carburetor kit is a full replacement assembly designed to fit Stihl BR600 and BR700 backpack leaf blowers and directly replace Zama C1Q-S184 and specific OEM numbers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis comprehensive parts kit from Dalom includes a carburetor plus the common wear components needed to restore fueling and starting performance on many Stihl BR600\/BR700 backpack blowers. Each kit contains the carburetor body and a set of matched consumables so you can swap worn parts and return your machine to service without hunting for additional small items. Before ordering, confirm your engine’s model and OEM part numbers to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my Stihl BR600 or BR700?\u003c\/h3\u003e\n\u003cp\u003eYes — the Dalom BR 600 carburetor is manufactured to match the mounting and port dimensions for most BR600 and BR700 units that use Zama-style carburetors. It lists direct replacement references that help you verify fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM #4282-120-0611 (BR600 specific)\u003c\/li\u003e\n  \u003cli\u003eReplaces Zama C1Q-S184 and OEM #4282-120-0607 (BR600\/BR700)\u003c\/li\u003e\n  \u003cli\u003eCheck your engine’s model and existing part number before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included in the Dalom carburetor kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the core carburetor and a selection of commonly replaced parts so you can complete the install without extra shopping. These items cover fuel, ignition, air filtration and gaskets, simplifying routine rebuilds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 carburetor body built for BR600\/BR700 fitment\u003c\/li\u003e\n  \u003cli\u003e1 air filter, 1 spark plug, 1 fuel filter and primer bulb\u003c\/li\u003e\n  \u003cli\u003e2 lengths of fuel line, 2 gaskets and 1 carb adjustment tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this kit affect performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded carburetor and worn consumables typically restores consistent fuel delivery, easier starting and steadier idle. The kit’s included parts address common failure points like clogged filters, hardened fuel lines and missing gaskets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew fuel filter and lines reduce contamination and flow restrictions\u003c\/li\u003e\n  \u003cli\u003eFresh spark plug helps reliable ignition when combined with proper gap\u003c\/li\u003e\n  \u003cli\u003eIncluded adjustment tool lets you fine-tune idle and mixture settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is moderate for anyone comfortable with small engine maintenance; basic hand tools and a clean workspace are required. Follow safety precautions, drain fuel or work with minimal fuel present, and use the included gaskets and lines for a complete seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrepare screwdrivers, socket set and pliers for removal and reassembly\u003c\/li\u003e\n  \u003cli\u003eDrain or reduce fuel before disconnecting lines to avoid spills\u003c\/li\u003e\n  \u003cli\u003eUse the included carb adjustment tool and consult service manual for settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dalom BR 600 carburetor kit is aimed at homeowners, landscapers and small-engine technicians who need a straightforward replacement for Stihl BR600 and BR700 backpack blowers. It suits anyone wanting a single package that supplies the carburetor plus the common replacement parts needed to get a blower back into reliable service, provided they verify compatibility with their blower’s OEM numbers before purchase.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor compatible with BR600 only or BR700 as well?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit lists replacements for BR600 and BR700 models; confirm your OEM part number (e.g., 4282-120-0607 or 4282-120-0611) before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to install the carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes the carburetor, air filter, spark plug, fuel filter, fuel lines, primer bulb, gaskets and an adjustment tool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54199952015544,"sku":"B07GB3BZ4M","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-brr600-carburetor-front-view.jpg?v=1790603798"},{"product_id":"dalom-2-4mm-095-trimmer-line-5-lb-1425-ft-spool-heavy-gauge-round-for-stihl-echo","title":"Dalom 2.4mm (.095) Trimmer Line — 5 lb 1425 ft Spool, Heavy‑Gauge Round for Stihl \u0026 Echo","description":"\u003cp\u003e\u003cstrong\u003eDalom 2.4 mm (.095\") round trimmer line on a 5-pound, 1425-foot spool provides long-lasting, versatile cutting performance for many Stihl and Echo string trimmers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a dependable replacement line that reduces downtime and stays effective through heavy use, this heavy-gauge round line is engineered for durability and consistent feed. The spool holds a large quantity of line—about 1425 feet—so you replace line far less often than with small packs. A simple cutting tool is included to help you load and size the line cleanly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this trimmer line improve cutting and wear life?\u003c\/h3\u003e\n\u003cp\u003eThe Dalom round profile concentrates mass evenly along the edge, giving smooth, steady cuts through grass and light weeds while resisting breakage. Compared with thin or irregularly shaped lines, round 2.4 mm line tolerates impacts better and shows less fraying, so it lasts longer between replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.4 mm (0.095\") diameter for heavier-duty trimming\u003c\/li\u003e\n  \u003cli\u003eRound shape reduces snagging on debris and stones\u003c\/li\u003e\n  \u003cli\u003eThicker core resists frequent snapping and fraying\u003c\/li\u003e\n  \u003cli\u003eLarge spool capacity cuts replacement frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this spool fit my Stihl or Echo trimmer head?\u003c\/h3\u003e\n\u003cp\u003eThis spool is designed to be compatible with a wide range of Stihl and Echo heads and many universal aftermarket 128\/125-series heads. It works well for models in the listed families when you cut and wind the correct lengths for your specific head. Check your trimmer manual or head dimensions to verify line capacity and winding direction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Stihl FS-series brushcutters and FS trimmers\u003c\/li\u003e\n  \u003cli\u003eFits numerous Echo SRM and GT series handheld trimmers\u003c\/li\u003e\n  \u003cli\u003eWorks with universal 122\/124\/125\/128\/223\/322\/323\/325\/326 heads\u003c\/li\u003e\n  \u003cli\u003eIncludes cutting tool to trim line to the proper feed length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to load and use the line from this spool?\u003c\/h3\u003e\n\u003cp\u003eLoading is straightforward: cut the required lengths with the included tool, pre-measure if your head needs multiple strands, then wind according to your head’s directions. The heavy spool keeps the line tidy and prevents tangles while you work. Once wound correctly, feeding and performance are the same as original equipment line for everyday trimming tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with a cutting tool for accurate pre-cut lengths\u003c\/li\u003e\n  \u003cli\u003eLarge-volume spool reduces handling and restocking\u003c\/li\u003e\n  \u003cli\u003eLine winds smoothly to minimize jamming and tangles\u003c\/li\u003e\n  \u003cli\u003eIdeal for both bump-feed and manual-feed heads when cut to size\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or storage tips help maximize the line’s life?\u003c\/h3\u003e\n\u003cp\u003eKeep unused spool out of direct sunlight and extreme heat to avoid softening or warping. Store in a cool, dry place and keep the spool on a flat surface to preserve shape. Replace any section that shows heavy abrasion to avoid feeding worn line into the head.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore in cool, shaded area to prevent UV degradation\u003c\/li\u003e\n  \u003cli\u003eAvoid compressing the spool to maintain roundness\u003c\/li\u003e\n  \u003cli\u003eInspect wound lengths before use for nicks or frays\u003c\/li\u003e\n  \u003cli\u003eTrim excess after winding to ensure even feed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Landscapers, lawn-care pros, and homeowners who run medium-duty two-stroke or electric string trimmers and want a high-capacity spool that reduces refills. If you operate Stihl FS or Echo SRM\/GT series tools—or compatible universal heads—and need a thicker line that stands up to regular use, this 2.4 mm Dalom spool delivers long runtime and dependable cutting without frequent line changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this 0.095\" line compatible with my Stihl FS55?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 2.4 mm (0.095\") Dalom line is compatible with Stihl FS55 models when cut and wound to the head’s specified lengths.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much line is on the spool and does it include tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spool contains about 1425 feet of line (approx. 5 lb) and includes a cutting tool for measuring and trimming lengths.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dalom","offers":[{"title":"Default Title","offer_id":54203948466360,"sku":"B08LH4X8SB","price":100.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/dalom-front-spool-packaging.jpg?v=1790621909"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/dalom-front-spool-packaging.jpg?v=1790680068","url":"https:\/\/canadianlawn.ca\/collections\/dalom.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}