{"title":"BougeRV","description":"\u003cp\u003eBrowse 26 BougeRV products at Canadian Lawn, including solar controllers, inverters \u0026amp; accessories and solar panels. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"bougerv-solar-branch-connector-2-to-1-y-adapter-fmm-mff-pair-ip67-for-14-10-awg","title":"BougeRV Solar Branch Connector 2-to-1 Y Adapter (FMM+MFF) Pair — IP67, for 14–10 AWG","description":"\u003cp\u003e\u003cstrong\u003eBougeRV Solar Branch Connectors 2-to-1 (one FMM and one MFF) are a ready-to-use pair of waterproof MC4-style Y adapters that let you parallel solar panels or split a cable safely and quickly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two Y-style adapters include one male-to-two-female (M\/FF) and one female-to-two-male (F\/MM) connector, designed to join 14–10 AWG photovoltaic cables. Built from PPO with tinned copper pins and an IP67-rated rubber seal, they resist water and dust and lock together for outdoor use. The connectors are TÜV-tested, rated for wide temperature ranges, and designed for tool-free connection and disconnection.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters make paralleling solar panels easier?\u003c\/h3\u003e\n\u003cp\u003eInstead of cutting and splicing cables or buying specialized combiner boxes, plug these Y connectors into existing panel leads to combine outputs quickly. They preserve polarity and use a locking tab to prevent accidental separation under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect two panel positives or negatives to one cable without soldering\u003c\/li\u003e\n  \u003cli\u003eCompatible with 14AWG–10AWG PV cables commonly used on small arrays\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play design reduces installation time\u003c\/li\u003e\n  \u003cli\u003eBuilt-in locking tab keeps connections secure outdoors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors durable enough for outdoor and marine use?\u003c\/h3\u003e\n\u003cp\u003eYes — the connectors use PPO housings and tinned copper pins that resist corrosion, while the IP67-rated rubber ring seals out water and dust. They are designed to operate over a broad temperature range, minimizing wear in harsh environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67 waterproof and dustproof sealing for outdoor exposure\u003c\/li\u003e\n  \u003cli\u003eTinned copper pins for improved corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePPO material resists UV and thermal stress\u003c\/li\u003e\n  \u003cli\u003eTÜV-tested for quality and safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need tools or special skills to use these Y connectors?\u003c\/h3\u003e\n\u003cp\u003eNo special tools are required for connecting or disconnecting these adapters. The connectors are designed for fingertip operation: press the locking tabs to separate, and push until the lock clicks to join. For cable termination, standard crimp or MC4-style assembly methods apply if you need to attach bare wires.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFinger-press locking tab for quick release\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play mating with MC4-style PV leads\u003c\/li\u003e\n  \u003cli\u003eSimple crimping or assembly if attaching bare cable ends\u003c\/li\u003e\n  \u003cli\u003eClear polarity markings reduce wiring mistakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and safety specs should I check before using them?\u003c\/h3\u003e\n\u003cp\u003eThese adapters suit typical small-to-medium PV systems using 14–10 AWG cable; confirm voltage and current ratings match your array and inverter specifications. Always follow local electrical codes and use appropriate fusing and overcurrent protection when paralleling modules.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 14AWG to 10AWG solar cables\u003c\/li\u003e\n  \u003cli\u003eTÜV-certified components for safety assurance\u003c\/li\u003e\n  \u003cli\u003eTemperature range suitable from cold to hot climates\u003c\/li\u003e\n  \u003cli\u003eUse with proper fuses or breakers for parallel connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These BougeRV Y-branch adapters are aimed at DIY solar installers, RV and campervan owners, off-grid hobbyists, and small commercial PV technicians who need a fast, reliable way to parallel modules or split a run. If you want to expand or reconfigure an array without complex rewiring, these plug-and-play waterproof connectors provide a practical, durable solution backed by BougeRV support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with existing MC4 solar cables?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They mate with standard MC4-style PV leads and support 14–10 AWG cable sizes for common solar setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these connectors waterproof for rooftop installations?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They feature an IP67 rubber seal and locking tab designed to keep out water and dust for outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54192776806584,"sku":"B07DJ5PHSB","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-packaging-y-connectors.jpg?v=1790550266"},{"product_id":"bougerv-white-solar-double-cable-entry-gland-box-waterproof-abs-rv-boat-roof-housing-silicone-seal","title":"BougeRV White Solar Double Cable Entry Gland Box — Waterproof ABS RV \u0026 Boat Roof Housing, Silicone Seal","description":"\u003cp\u003e\u003cstrong\u003eBougeRV's White Solar Double Cable Entry Gland Box is a waterproof ABS roof cable housing that routes two solar or accessory wires into RVs, boats, and yachts while protecting the opening from water and UV damage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to blend with light-colored vehicle roofs, this drop-shaped entry gland keeps wiring neat and watertight when you mount solar panels or run cables into cabins. Built from UV-stabilized ABS with a silicone sealing ring and PG11-compatible glands, it’s intended for 14AWG–10AWG wiring and comes ready to fasten to wood or composite surfaces with included stainless self-tapping screws.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this entry gland prevent leaks on a rooftop?\u003c\/h3\u003e\n\u003cp\u003eThe unit uses a silicone gasket and waterproof PG11-style cable glands to form a secure barrier around each cable and the housing flange. Properly tightened glands and the ABS shell reduce water intrusion paths while the included screws allow a flush, sealed attachment to the roof surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone gasket for a durable watertight seal\u003c\/li\u003e\n  \u003cli\u003ePG11-compatible cable glands that clamp 14AWG–10AWG cables\u003c\/li\u003e\n  \u003cli\u003eABS shell with UV-resistant additive to prevent degradation\u003c\/li\u003e\n  \u003cli\u003eMounting screws for a firm, leak-minimizing installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the gland stop internal nuts from turning during installation?\u003c\/h3\u003e\n\u003cp\u003eBougeRV addressed common installation frustration by adding hexagon nuts inside the assembly to limit internal movement. That internal support minimizes spacing that previously allowed the gland parts to rotate, so tightening the cap holds cables securely and speeds up fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed hexagon inner nuts reduce internal slippage\u003c\/li\u003e\n  \u003cli\u003eImproved torque transfer when tightening the gland cap\u003c\/li\u003e\n  \u003cli\u003eSimpler, more reliable cable clamping—less rework\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to mount and seal the entry box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: feed the cables through the glands, tighten the caps, and attach the body to the roof. You can use the supplied stainless-steel self-tapping screws for wood or add glue\/decorative sealant for extra water protection depending on where you fit it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePass cables, tighten glands, and fasten with included screws\u003c\/li\u003e\n  \u003cli\u003eCan be sealed with decor sealant or construction adhesive (not included)\u003c\/li\u003e\n  \u003cli\u003eDesigned for rooftop, boat cabin, garage or shed installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and parts are included in the package?\u003c\/h3\u003e\n\u003cp\u003eThe housing is molded from ABS plastic formulated with an anti-UV agent to resist fading, paired with a black silicone waterproof ring for long-term sealing. The box ships with two cable glands and three stainless self-tapping screws so you can mount and secure it immediately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-resistant ABS outer shell for color stability\u003c\/li\u003e\n  \u003cli\u003eSilicone waterproof gasket for the primary seal\u003c\/li\u003e\n  \u003cli\u003eTwo cable glands suitable for 14AWG–10AWG wires\u003c\/li\u003e\n  \u003cli\u003eThree stainless steel self-tapping screws included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BougeRV White Solar Double Cable Entry Gland Box is aimed at RV and boat owners, mobile solar installers, and DIYers who want a clean, reliable way to bring two cables into a vehicle or structure. It suits installers who prefer a white, low-profile look on light roofs and need durable, UV-stable materials plus a faster, less fiddly installation thanks to the anti-slip internal nuts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What cable sizes fit the BougeRV double entry gland?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It accepts cables from 14AWG to 10AWG using the supplied PG11-style glands.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it on fiberglass or wood roofs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; use the included screws for wood or adhesive\/sealant for fiberglass and composite surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54192831365304,"sku":"B08GL6WY2Z","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-entry-gland-box-front-view.jpg?v=1790552070"},{"product_id":"bougerv-solar-cable-entry-gland-for-rvs-gray-weatherproof-double-14-10awg","title":"BougeRV Solar Cable Entry Gland for RVs — Gray, Weatherproof Double 14–10AWG","description":"\u003cp\u003e\u003cstrong\u003eBougeRV Solar Weatherproof Double Cable Entry Gland is a drop-shaped ABS junction housing that lets two 14AWG–10AWG solar cables pass through roofs or panels while keeping the installation watertight.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis specially shaped cable entry gland is built for mobile and outdoor solar installs where a durable, sealed roof entry is essential. The kit combines an ABS housing with a silicone gasket and PG11-style waterproof cable glands designed to accommodate most round solar and DC cables between 2mm² and 6mm² (roughly 14–10 AWG). Included stainless steel screws and a hex-nut anti-slip design help secure the unit to RVs, campervans, boats, sheds and other small structures while resisting UV and weather exposure.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BougeRV double cable gland keep water out of my RV or boat?\u003c\/h3\u003e\n\u003cp\u003eThe entry gland uses a drop-shaped housing, a silicone gasket and PG11-style threaded caps to create a sealed pathway for two cables. When the gland caps are tightened, the silicone ring compresses around the cables to block water ingress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-shaped ABS housing directs water away from the cable openings\u003c\/li\u003e\n  \u003cli\u003eSilicone waterproof ring forms a flexible seal around cables\u003c\/li\u003e\n  \u003cli\u003ePG11-style threaded caps tighten to maintain compressive sealing\u003c\/li\u003e\n  \u003cli\u003eUV-stabilized ABS prevents cracking and discoloration outdoors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich cable sizes and types are compatible with this solar cable entry?\u003c\/h3\u003e\n\u003cp\u003eThis gland handles most common round solar and DC conductors from 2mm² to 6mm² (approximately 14 AWG to 10 AWG). It accepts PV, DC power, aerial or lighting cables so you can route panel leads or low-voltage wiring cleanly through a roof or wall.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 14AWG, 12AWG, 10AWG and metric equivalents (2–6 mm²)\u003c\/li\u003e\n  \u003cli\u003eCompatible with photovoltaic PV cable, DC power cable, and standard round conductors\u003c\/li\u003e\n  \u003cli\u003eTwo-cable configuration designed for positive and negative solar leads\u003c\/li\u003e\n  \u003cli\u003eWorks for RVs, campervans, boats, sheds and small outbuildings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation easier or more secure compared to basic cable glands?\u003c\/h3\u003e\n\u003cp\u003eBougeRV addressed common installation issues by adding a hexagon inner nut set that reduces spacing and prevents slippage while tightening. The package also includes wood-friendly stainless steel self-tapping screws for a fast, secure mount.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHexagon nuts minimize inner component movement for reliable tightening\u003c\/li\u003e\n  \u003cli\u003eQuick push-through cable routing—tighten the cap to seal\u003c\/li\u003e\n  \u003cli\u003eIncludes three stainless steel self-tapping screws for mounting to wood substrates\u003c\/li\u003e\n  \u003cli\u003eCan be further sealed with glue or exterior sealant if needed (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the BougeRV entry gland for long-term outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe shell is molded from ABS formulated with an anti-UV additive to resist sun damage and maintain color and structural integrity over time. The silicone gasket retains flexibility to sustain a reliable seal through temperature fluctuations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-stabilized ABS resists fading and brittleness in sunlight\u003c\/li\u003e\n  \u003cli\u003eSilicone gasket remains flexible across a broad temperature range\u003c\/li\u003e\n  \u003cli\u003eStainless steel screws resist corrosion in marine environments\u003c\/li\u003e\n  \u003cli\u003eCompact, low-profile design reduces wind and water exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BougeRV Solar Weatherproof Double Cable Entry Gland is intended for DIYers, van-lifers, and professional installers fitting small solar systems on RVs, campervans, boats, sheds and tiny homes. If you need a neat, weatherproof route for two solar or DC cables with simple installation and UV-resistant materials, this kit offers a purpose-built solution that minimizes leaks and assembly frustration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this gland fit both positive and negative solar panel leads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The double-gland design accepts two round cables simultaneously, suitable for positive and negative solar leads sized 14–10 AWG.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra sealant to make the installation waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The silicone gasket and threaded caps provide a waterproof seal, but you can add exterior sealant or glue for added security depending on location.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54192885694648,"sku":"B07GDH2TTV","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-view-housing.jpg?v=1790553745"},{"product_id":"bougerv-solar-parallel-connectors-2-to-4-y-branch-10awg-cable-ip68-waterproof-30cm-branch-leads","title":"BougeRV Solar Parallel Connectors 2-to-4 Y-Branch 10AWG Cable — IP68 Waterproof, 30cm Branch Leads","description":"\u003cp\u003e\u003cstrong\u003eBougeRV Solar Parallel Connectors are a 2-to-4 Y-branch 10AWG cable assembly that joins multiple panels in parallel with robust IP68 connectors and longer 30cm branch leads for easier installs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for RVs, small arrays and portable systems, this BougeRV parallel cable combines two Y-branch photovoltaic leads into a single positive and negative run to simplify wiring. The main conductor uses 6mm² (10AWG) for reliable current capacity while the branches use 4mm² (12AWG) to match most panel outputs. Built with XLPE insulation, tinned copper conductors and reinforced overmolding, the assembly is rated to DC1000V and can endure a wide temperature range for outdoor use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the longer branch cable design make installation easier?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV cable uses 30cm branch lengths rather than the common 20cm, reducing the need for extra extensions and allowing neater routing on roofs or frame-mounted panels. That extra reach helps line up connectors without stretching or forcing cable runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30cm branch leads reduce the need for extension cables\u003c\/li\u003e\n  \u003cli\u003eSmoother routing on angled roofs and mounts\u003c\/li\u003e\n  \u003cli\u003eLess strain on connector joints during placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I connect two or more solar panels with this Y-branch cable?\u003c\/h3\u003e\n\u003cp\u003eYes — the assembly pairs two Y-branch PV leads into one positive (red) and one negative (black) main line, making parallel connections straightforward even for first-time installers. The cable supports typical panel sizes and is compatible with 10AWG–14AWG solar cables for flexible system design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain run: 6mm² (10AWG) for higher current capacity\u003c\/li\u003e\n  \u003cli\u003eBranch run: 4mm² (12AWG) tailored for panel outputs\u003c\/li\u003e\n  \u003cli\u003eColor-coded red\/black leads for intuitive wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat weather resistance and safety features are included?\u003c\/h3\u003e\n\u003cp\u003eBougeRV designed the connectors with a 2cm reinforced overmolding and IP68-rated housings to keep water and dust out of the mating surfaces. The construction uses XLPE insulation and tinned copper conductors meeting industry standards so the cable performs outdoors and resists corrosion and pulling forces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof connectors for outdoor exposure\u003c\/li\u003e\n  \u003cli\u003e2cm overmolding for improved pull resistance\u003c\/li\u003e\n  \u003cli\u003eXLPE insulation and tinned copper for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat solar connectors and systems is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis parallel connector works with most standard solar panel MC4-style connectors and conventional PV cables in the 10AWG–14AWG range. It is not compatible with Amphenol-style or other nonstandard proprietary connectors, so verify connector types before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with common MC4-type solar connectors\u003c\/li\u003e\n  \u003cli\u003eAccepts 10AWG to 14AWG panel cables\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Amphenol or irregular proprietary connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, campers and DIY solar enthusiasts who need a reliable, weatherproof way to parallel two to four panels will appreciate BougeRV’s longer branches and rugged construction. It’s well suited for RV roof installs, small off-grid arrays, portable solar kits and anyone seeking cleaner wiring with fewer extension cables. For product support, BougeRV includes 18 months of technical assistance to help with fitment or troubleshooting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this cable join four solar panels in parallel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 2-to-4 Y-branch assembly consolidates panels into single positive and negative runs, supporting typical small arrays when connectors match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the connector waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the connectors are IP68-rated with reinforced overmolding for water and dust protection in outdoor installations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54192894410936,"sku":"B0DRC1TKD2","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-assembly-parallel-connector.jpg?v=1790554109"},{"product_id":"bougerv-solar-connectors-12-pack-6-pairs-10awg-waterproof-uv-resistant-housings-with-tinned-copper-pins-spanners","title":"BougeRV Solar Connectors 12-Pack (6 Pairs) 10AWG — Waterproof, UV-Resistant Housings with Tinned-Copper Pins \u0026 Spanners","description":"\u003cp\u003e\u003cstrong\u003eBougeRV 12 PCS Solar Connectors are six matched male\/female MC4-style pairs with tinned-copper pins and a waterproof seal, plus spanners for fast, secure 10AWG (13–10AWG) PV cable connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you install or maintain solar panels, reliable connectors cut installation time and reduce failure points. These BougeRV connectors include six male and six female housings, matching copper pins, and a pair of small spanners so you can crimp, assemble, and tighten each connection on-site without extra tools. The housings are molded from UV-stable PPO and include a rubber waterproof ring to keep moisture and dust out of the connection.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors create a durable electrical connection?\u003c\/h3\u003e\n\u003cp\u003eThe conductor pins are tin-plated copper, which combines good conductivity with corrosion resistance after crimping. When properly crimped to the cable and inserted into the housing, the pins form a low-resistance, mechanically robust joint designed for repeated handling and environmental stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTinned-copper pins for stable conductivity and corrosion protection\u003c\/li\u003e\n  \u003cli\u003eCrimp-style attachment reduces heating under load\u003c\/li\u003e\n  \u003cli\u003ePositive mechanical lock inside the housing prevents accidental disengagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors weatherproof and UV-resistant?\u003c\/h3\u003e\n\u003cp\u003eYes — the connector body uses PPO insulation material with proven UV endurance and aging resistance. Each mating interface includes a molded waterproof ring to keep water and dust out of the contact area, extending service life outdoors without special sealing compounds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated rubber waterproof ring at the plug interface\u003c\/li\u003e\n  \u003cli\u003ePPO housing rated for prolonged sun exposure and temperature cycles\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor PV conditions including rain and wind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cable sizes and applications work with these connectors?\u003c\/h3\u003e\n\u003cp\u003eThese connectors accept PV cables with insulation diameters suited to 13–10AWG (approximately 2.5–6 mm²). They are compatible with typical rooftop and small off-grid solar runs, array jumper leads, and extension cables where a secure, removable connector pair is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 13–10AWG PV cables (2.5–6 mm²)\u003c\/li\u003e\n  \u003cli\u003eUseful for panel-to-panel, panel-to-combiner, and quick-disconnect runs\u003c\/li\u003e\n  \u003cli\u003eIncluded pins fit standard crimp tooling for 10AWG conductors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quick is assembly and maintenance on site?\u003c\/h3\u003e\n\u003cp\u003eAssembly is designed to be straightforward — crimp the tinned pin to your stripped conductor, insert the pin into the housing until it clicks, then tighten the mating pair. The included spanners let you torque connectors to a secure fit; removal is simple and doesn’t require specialized gear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick crimp-and-click assembly workflow\u003c\/li\u003e\n  \u003cli\u003eIncluded spanners for secure hand-tightening and removal\u003c\/li\u003e\n  \u003cli\u003eDesigned for field repairs and rapid panel swaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, DIY solar hobbyists, and maintenance technicians who need a reliable, weatherproof connection solution for 10AWG PV cabling. The BougeRV kit is practical for new installations, retrofits, or keeping on hand as spare connectors for service calls. If you want straightforward on-site assembly, UV-stable housings, and corrosion-resistant pins in a compact 12-piece kit, these connectors deliver the essentials without complex accessories.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these connectors fit 10AWG solar cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supports 13–10AWG (about 2.5–6 mm²) PV cables when crimped with the supplied pins.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They have integrated rubber waterproof rings and UV-resistant PPO housings designed to seal against water and dust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54192907878584,"sku":"B073TX1N5Q","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-connector-packaging_jpg.jpg?v=1790554239"},{"product_id":"bougerv-solar-parallel-connectors-2-to-6-y-branch-10awg-cable-30cm-branches-ip68-waterproof","title":"BougeRV Solar Parallel Connectors 2-to-6 Y-Branch 10AWG Cable — 30cm Branches, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eBougeRV Solar Parallel Connectors are a Y-branch 2-to-6 parallel cable set (10AWG main, 12AWG branches) designed to join multiple solar panels quickly and reliably for outdoor PV arrays.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese cables simplify solar panel wiring by combining two Y-branch leads into a single harness with color-coded positive (red) and negative (black) conductors, longer 30cm branch lengths, and robust IP68-rated connectors. Built with XLPE insulation, tinned copper, and reinforced overmolding, the assembly meets UL and TÜV standards for many conventional solar connector types and is rated to DC 1000V for typical residential and mobile solar setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors speed up panel installation?\u003c\/h3\u003e\n\u003cp\u003eThe extended 30cm branch lengths reduce the need for extra extensions and make aligning panels easier during parallel wiring. Color-coded leads and pre-mated Y branches minimize mistakes and cut installation time for both beginners and pros.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30cm branch cables versus typical 20cm—fewer extension cables required\u003c\/li\u003e\n  \u003cli\u003ePre-assembled MFFF\/FMMM Y branches for immediate use\u003c\/li\u003e\n  \u003cli\u003eRed\/black color coding to lower wiring errors during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these cables durable enough for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eYes — the connectors use IP68-rated housings, XLPE insulation, and tinned copper conductors for corrosion resistance and high temperature tolerance. A 2cm reinforced overmolding adds pull resistance and weather sealing where cables meet the connector.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68 connector rating for dust and water resistance\u003c\/li\u003e\n  \u003cli\u003eXLPE insulation and tinned copper for long-term outdoor performance\u003c\/li\u003e\n  \u003cli\u003e2cm overmolding to reduce strain and boost waterproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical specifications and compatibility should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe main trunk is 6mm² (10AWG) for lower voltage drop, while each branch uses 4mm² (12AWG), supporting standard parallel configurations. Rated to DC 1000V and tested across a wide temperature range, the cable is compatible with most conventional solar connectors except some proprietary Amphenol or nonstandard types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain conductor: 6mm² (10AWG); branch conductors: 4mm² (12AWG)\u003c\/li\u003e\n  \u003cli\u003eRated voltage: DC 1000V; operating temperature range: -40°F to 230°F\u003c\/li\u003e\n  \u003cli\u003eCompatible with 10–14AWG panel leads and common MC-style connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does BougeRV support this product after purchase?\u003c\/h3\u003e\n\u003cp\u003eBougeRV includes 18 months of tech support to help with fit, wiring questions, or troubleshooting during setup. If parts are missing or you encounter issues, customer support is available to guide or arrange replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18-month technical support for installation and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eGuidance on connector compatibility and wiring best practices\u003c\/li\u003e\n  \u003cli\u003eReplacement assistance if connectors or cables are defective\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: installers, RV and van lifers, tiny-home owners, and DIY solar hobbyists who want to parallel-connect 2–6 panels quickly without custom crimping or extra extension cables. The BougeRV 2-to-6 Y-branch parallel cable is best for standard MC\/MC4-compatible panels and for anyone seeking a weatherproof, time-saving harness for rooftop, portable, or stationary solar arrays.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these connectors join more than two panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The BougeRV 2-to-6 Y-branch cable lets you parallel-connect 2 to 6 panels using combined Y branches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need adapter cables for my panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no for MC-style panels; exceptions include Amphenol or other nonstandard connectors, which may need adapters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54193816830136,"sku":"B0DRC2F1NJ","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-connector.jpg?v=1790566439"},{"product_id":"bougerv-solar-branch-connectors-y-adapter-2-pairs-fmm-mff-ip67-weatherproof-14-10-awg","title":"BougeRV Solar Branch Connectors Y Adapter, 2 Pairs FMM+MFF — IP67 Weatherproof, 14–10 AWG","description":"\u003cstrong\u003eBougeRV Solar Branch Connectors are quick plug-and-play Y adapters (one male to two female and one female to two male) designed to parallel solar panels safely and reliably outdoors.\u003c\/strong\u003e\n\n\u003cp\u003eThese connectors let you split or combine MC4-style solar leads without tools, supporting 14–10 AWG cable sizes and rated for long-term outdoor exposure. Built with PPO housings and tinned copper pins, they include an IP67 sealing ring and a keyed locking clip to resist moisture, dust, and vibration. TÜV certification and a broad operating temperature range make these adapters suitable for residential and mobile solar setups where secure, weatherproof junctions are essential.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors simplify combining solar panels?\u003c\/h3\u003e\n\u003cp\u003eThey let you parallel two panel outputs into one line or split one output into two without soldering or special crimps. The gendered pair (male-to-two-female and female-to-two-male) covers common wiring scenarios so you can match panel leads quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with 14–10 AWG solar cables for most residential and RV panels\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play: push to engage and press the lock tabs to release\u003c\/li\u003e\n  \u003cli\u003eTwo pairs included—one FMM and one MFF—for flexible configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors weatherproof and durable enough for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eYes — an IP67-rated sealing ring blocks water and dust while a robust locking clip keeps connections secure under vibration. The PPO shell resists UV and heat, and tinned copper contacts reduce corrosion risk in wet environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67 sealing ring protects contacts from rain and dust\u003c\/li\u003e\n  \u003cli\u003eTinned copper pins for improved conductivity and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eOperating range designed for extreme temperatures from -40°F to 230°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these connectors meet safety and quality expectations?\u003c\/h3\u003e\n\u003cp\u003eThey are manufactured to industry standards and TÜV-certified, giving confidence for use in household, marine, and recreational vehicle solar systems. The materials and construction focus on secure mechanical engagement and stable electrical contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePPO housing material for mechanical strength and thermal stability\u003c\/li\u003e\n  \u003cli\u003eLocking mechanism prevents accidental disconnection\u003c\/li\u003e\n  \u003cli\u003eCertified testing reduces risk of premature failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: match the male and female connectors and push until the lock clicks; press the lock tabs to disconnect. No special tools are required for normal connection and disconnection, though proper cable stripping and crimping or compatible pre-terminated cables deliver the best performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free mating and unmating via built-in locking tabs\u003c\/li\u003e\n  \u003cli\u003eCompatible with pre-terminated solar leads for fast setup\u003c\/li\u003e\n  \u003cli\u003ePeriodic visual inspection recommended for salt or harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These BougeRV Y branch connectors are aimed at DIY solar installers, RV and marine owners, off-grid campers, and electricians who need a durable, weatherproof way to parallel solar panels or reconfigure wiring quickly. They suit projects that use 14–10 AWG cable and require certified, sealed connections for outdoor conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What cable sizes do these Y connectors support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 14–10 AWG solar cables, compatible with most residential and RV panel leads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They include an IP67 sealing ring and a locking clip to resist water and dust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54194227019960,"sku":"B07H7J9PNL","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-y-connector-front-view.jpg?v=1790571736"},{"product_id":"bougerv-solar-y-branch-mc4-adapters-2-pair-parallel-connector-set-black-ip67-20a-dc1000v","title":"BougeRV Solar Y-Branch MC4 Adapters, 2-Pair Parallel Connector Set (Black) — IP67, 20A DC1000V","description":"\u003cp\u003e\u003cstrong\u003eBougeRV 2 Pairs Solar Connectors Y Branch Parallel Adapter instantly splits or combines solar panel outputs for safe, waterproof parallel wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Y-branch MC4-style adapters from BougeRV let you join two solar panel positive or negative leads into a single feed without soldering or complex tools. Built for 14–10 AWG cables and rated to DC1000V and 20A, the pair is molded from PPO with IP67 sealing so you can install them on roofs, RVs, boats, and outdoor arrays with confidence. The connectors feature a quick-disconnect lock and an intuitive assembly for fast field wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors simplify setting up a parallel solar array?\u003c\/h3\u003e\n\u003cp\u003eInstead of running separate runs for each panel back to the charge controller, the BougeRV Y branch adapters let you combine two panel outputs at the module location. This reduces cable clutter, lowers installation time, and provides a clean junction point for parallel strings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombine two panel positives or negatives into one output for the controller.\u003c\/li\u003e\n  \u003cli\u003eWorks with 14–10 AWG (1.5–6 mm²) solar cable sizes for flexible planning.\u003c\/li\u003e\n  \u003cli\u003eSaves conduit and cable length when panels are mounted close together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors weatherproof and durable enough for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eYes — BougeRV designed the housings from PPO and included a waterproof ring in the male connector to resist dust and moisture. The IP67 rating means they withstand temporary immersion and provide long-term protection for rooftop and marine installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePPO housing resists UV and temperature cycling for outdoor longevity.\u003c\/li\u003e\n  \u003cli\u003eIP67-rated sealing protects contacts in wet, dusty environments.\u003c\/li\u003e\n  \u003cli\u003eGold-plated contacts ensure low-resistance connections over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical specs and cable sizes should I match for safe performance?\u003c\/h3\u003e\n\u003cp\u003eEach Y branch pair is rated for 20A continuous current and up to DC1000V, compatible with most small to medium off-grid solar setups. Use cable within the recommended 14–10 AWG range and confirm panel short-circuit current so you stay within the 20A rating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated current: 20A; rated voltage: DC1000V.\u003c\/li\u003e\n  \u003cli\u003eCompatible cable: 14–10 AWG (1.5–6 mm²) solar wire.\u003c\/li\u003e\n  \u003cli\u003eVerify array Isc to prevent exceeding connector current limits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quick is installation and maintenance with these adapters?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: push-fit mating, then press the built-in lock to disconnect if needed. No crimping or special tools are required for normal assembly, making these adapters convenient for field service and seasonal system changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-to-connect mating and a built-in lock for secure assembly.\u003c\/li\u003e\n  \u003cli\u003eNo soldering required; simple hand assembly for most users.\u003c\/li\u003e\n  \u003cli\u003eDisconnect quickly using the built-in release for service or replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, DIYers, and RV or boat owners who want to parallel solar panels quickly and reliably will benefit from the BougeRV 2-pair Y branch adapter kit. It's aimed at small off-grid arrays, mobile applications, and anyone seeking a weatherproof, tool-friendly way to combine panel outputs while keeping cables tidy and connections safe. Always match the connector rating to your system's current and voltage specifications before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these adapters handle marine or rooftop exposure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they have IP67 sealing and PPO housing to resist water, dust, and UV for outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What cable sizes are supported by the BougeRV Y branch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 14–10 AWG (1.5–6 mm²) solar cable and are rated to 20A continuous.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54198783475896,"sku":"B0788J7PNH","price":56.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-y-branch-front-view.jpg?v=1790590767"},{"product_id":"bougerv-z-bracket-mounting-kit-for-100w-400w-solar-panels-8-pack-aluminum-corrosion-resistant-with-hardware","title":"BougeRV Z Bracket Mounting Kit for 100W–400W Solar Panels — 8-Pack Aluminum, Corrosion-Resistant with Hardware","description":"\u003cp\u003e\u003cstrong\u003eBougeRV Mounting Z Bracket kit is an 8-piece aluminum mounting solution designed to secure 100W–400W solar panels on RVs, trailers, boats and rooftops.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a lightweight, corrosion-resistant bracket set that fits a wide range of panel sizes and irregular surfaces, this BougeRV kit provides two complete sets (8 units each) with installation hardware and an 18-month warranty. The bent Z-shape adds clearance and adaptability for uneven roofs while the 0.95-inch mounting hole accommodates many panel bolt patterns.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these brackets fit my 100W–400W solar panels?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV Z brackets are engineered for broad compatibility across panels from 50W up to 600W, with specific sizing optimized for 100W, 150W, 200W, 300W and 400W models. The 0.95-inch mounting hole and elongated profile allow alignment with common frame holes and flexible placement on frames of different thicknesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with framed solar panels from 100W to 400W (and up to 600W generally).\u003c\/li\u003e\n  \u003cli\u003e0.95-inch mounting hole fits standard panel bolts and fasteners.\u003c\/li\u003e\n  \u003cli\u003eBent Z design provides standoff height for wiring and airflow.\u003c\/li\u003e\n  \u003cli\u003ePairs with supplied stainless hardware for secure attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose an aluminum Z bracket instead of stainless steel mounts?\u003c\/h3\u003e\n\u003cp\u003eAluminum alloy brackets in this kit are corrosion-resistant but significantly lighter than stainless steel, reducing roof load and making handling easier during installation. They balance strength with weight savings for mobile platforms like RVs and boats where excess mass is a drawback.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight construction lowers stress on roofs and rails.\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy resists rust in wet and coastal environments.\u003c\/li\u003e\n  \u003cli\u003eSturdy enough to support typical panel weights without sagging.\u003c\/li\u003e\n  \u003cli\u003eLower weight simplifies on-vehicle installations and transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these brackets on irregular or curved surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe unique bent Z profile offers a degree of adaptability to uneven or irregular mounting surfaces, allowing installers to create a stable mounting point on slightly angled or non-flat roofs. They are commonly used on RV roofs, trailers, and small boats where perfectly flat surfaces are rare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBent Z-shape adds clearance to accommodate surface irregularities.\u003c\/li\u003e\n  \u003cli\u003eWorks well with adhesive, sealant, or through-bolt installations.\u003c\/li\u003e\n  \u003cli\u003eProvides a stable anchor for panels on curved or corrugated roofs.\u003c\/li\u003e\n  \u003cli\u003eIncludes hardware to fasten through a range of roof materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWhat you get in the box: two sets of eight brackets (16 brackets total across both sets), a full installation hardware kit, and BougeRV’s 18-month warranty to cover manufacturing concerns. The kit is intended for do-it-yourself installers and professional fitters alike, and it pairs with standard solar panels and mounting practices.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for? Installers and owners of RVs, campers, tiny homes, trailers, yachts and small boats who want a lightweight, corrosion-resistant mounting option that fits a wide array of panel sizes. It’s also suitable for homeowners seeking low-profile, versatile brackets for rooftop or shed-mounted small solar systems where reduced roof load and adaptability to imperfect surfaces matter most.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these brackets compatible with framed 300W solar panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The brackets fit framed panels including 300W models, using the 0.95-inch hole and supplied hardware for standard frame holes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mounts resist corrosion on marine roofs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The aluminum alloy construction is corrosion-resistant and suitable for coastal and marine environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54199320805560,"sku":"B07Z4J5JCD","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-z-bracket-front-view.jpg?v=1790593411"},{"product_id":"bougerv-solar-parallel-connectors-2-to-8-y-branch-50cm-branch-leads-10awg-heavy-duty-ip68-waterproof","title":"BougeRV Solar Parallel Connectors 2-to-8 Y-Branch 50cm Branch Leads, 10AWG Heavy-Duty IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eBougeRV Solar Parallel Connectors are heavy-duty 2-to-8 Y-branch cables with extra-long 50cm branch leads and IP68-rated MC4-style plugs for easy, reliable parallel wiring of multiple solar panels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need to join two to eight photovoltaic panels in parallel without messy extensions or weak connections, this BougeRV Y-branch cable set simplifies wiring while meeting outdoor durability standards. Designed with longer branch cables (50cm vs typical 20cm), 10AWG main conductors, and reinforced overmolding, it reduces installation time and improves strain resistance on connectors. The cable assembly supports common MC4-compatible panels and is built for solar arrays on RVs, boats, home roofs, and off-grid systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the longer branch cable design save installation time?\u003c\/h3\u003e\n\u003cp\u003eLonger 50cm branch leads eliminate the frequent need for extra extension wires, letting you place panels with more flexible spacing. That reduces connector count and potential failure points while making alignment and routing easier on roofs or racks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50cm branch length vs typical 20cm—more reach between panels\u003c\/li\u003e\n  \u003cli\u003eFewer extension cables required, less clutter\u003c\/li\u003e\n  \u003cli\u003eSimpler routing reduces installation time and connector joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this cable suitable for multiple solar panels and what are the electrical specs?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV assembly connects 2–8 panels in parallel using matched positive and negative Y branches with a 6mm² (10AWG) main line and 4mm² branch lines. It carries up to DC 1000V and performs across a wide temperature range for outdoor solar setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfiguration: 2-to-8 Y-branch (MFFFF \/ FMMMM variants)\u003c\/li\u003e\n  \u003cli\u003eMain conductor: 6mm² (10AWG); branch conductors: 4mm² (12AWG)\u003c\/li\u003e\n  \u003cli\u003eRated voltage: DC 1000V; temperature range: -40°F to 230°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these connectors durable for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eBougeRV uses reinforced overmolding, XLPE insulation, and tinned copper conductors to resist moisture, UV, and mechanical strain. The IP68-rated connectors and 2cm overmolding add waterproofing and pull resistance appropriate for rooftop, marine, and RV environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68-rated waterproof connectors for wet conditions\u003c\/li\u003e\n  \u003cli\u003e2cm reinforced overmolding for extra strain relief\u003c\/li\u003e\n  \u003cli\u003eXLPE insulation and tinned copper for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich solar panels and connectors are compatible with this Y-branch cable?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV parallel cable is compatible with most MC4-style solar connectors and works with panel cable sizes from 10AWG to 14AWG. It is not compatible with some nonstandard or Amphenol-type connectors—verify your panel plug type before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with most conventional MC4-compatible panel connectors\u003c\/li\u003e\n  \u003cli\u003eAccepts 10AWG–14AWG panel leads without adapters\u003c\/li\u003e\n  \u003cli\u003eNot compatible with irregular connectors such as certain Amphenol types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, RV and marine owners, DIY solar hobbyists, and small off-grid system builders who want a tidy, reliable way to wire multiple panels in parallel. If you value fewer junctions, longer branch reach, and weatherproof connectors for outdoor solar arrays, BougeRV's 2-to-8 Y-branch 10AWG cables provide a practical, field-tested wiring solution. BougeRV also offers 18 months of technical support if you need installation help or have missing parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these connectors with Amphenol solar plugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These Y-branch cables are compatible with most MC4-style connectors but not Amphenol or irregular types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the branch cables require extension wires for typical panel setups?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Unlikely. The 50cm branch length reduces the need for extensions in most common panel layouts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54200244011192,"sku":"B0DRC2ZKK4","price":73.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-packaging-parallel-cables.jpg?v=1790608963"},{"product_id":"bougerv-10awg-solar-extension-cable-10ft-pair-red-black-mc4-connectors-weatherproof-heavy-duty","title":"BougeRV 10AWG Solar Extension Cable 10ft Pair – Red\/Black MC4 Connectors, Weatherproof Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003eBougeRV 10 Feet 10AWG Solar Extension Cable with Female and Male Connector is a heavy-duty pair of red and black solar extension leads that extend and lock panel cables to your charge controller with minimal power loss.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 10 AWG copper solar extension cables are built for larger photovoltaic setups where lower resistance and reliable weatherproof connections matter. Each set includes two 10-foot leads (one positive red, one negative black) with MC4-style male and female connectors on one end and stripped\/bare conductors on the other, making them ready to attach to a solar charge controller or combiner box. The thicker 10 AWG gauge reduces voltage drop compared with thinner panel cables, while the connector housings and insulation are engineered to resist sun, rain, and temperature extremes.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this cable affect my system's power delivery?\u003c\/h3\u003e\n\u003cp\u003eUsing 10 AWG instead of 12 or 14 AWG lowers conductor resistance and reduces power loss over the 10-foot run. That means more of your panel's generated current reaches the controller or battery bank, especially important for higher-current arrays or longer aggregate cable runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 AWG copper conductors minimize voltage drop versus smaller gauges\u003c\/li\u003e\n  \u003cli\u003eTwo 10-foot leads provide convenient placement flexibility for panels\u003c\/li\u003e\n  \u003cli\u003eMC4-style male\/female connectors ensure secure, low-resistance mating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors and the wiring durable outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV cables are designed with weatherproof insulation and robust connector housings to withstand prolonged outdoor exposure. Materials are chosen to tolerate heat, cold, and UV exposure typical of rooftop, ground-mount, and RV installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick UV-resistant jacket protects the copper conductors\u003c\/li\u003e\n  \u003cli\u003eConnector housings lock to prevent accidental separation\u003c\/li\u003e\n  \u003cli\u003eRated for outdoor temperature swings and moisture-prone environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use these cables with my solar panel and controller?\u003c\/h3\u003e\n\u003cp\u003eOne end of each cable has a mating male or female connector that plugs into the panel's existing MC4-style output. The opposite end is stripped\/bared so it can be fastened to a charge controller, combiner, or inline fuse holder. This layout streamlines connecting panels to system electronics without cutting into panel leads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug the connector end into the solar panel's matching MC4 output\u003c\/li\u003e\n  \u003cli\u003eSecure the stripped end to the controller terminal or combiner block\u003c\/li\u003e\n  \u003cli\u003eObserve correct polarity: red\/positive and black\/negative\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation details should I watch for?\u003c\/h3\u003e\n\u003cp\u003eKeep cable runs as short and direct as possible to further reduce voltage drop, and avoid kinks or tight bends that stress the conductor. Use appropriate strain relief and weatherproofing at connection points, and verify all connectors are fully seated and locked before energizing the array.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoute cables away from sharp edges and heat sources\u003c\/li\u003e\n  \u003cli\u003eUse clamps or zip ties for strain relief every few feet\u003c\/li\u003e\n  \u003cli\u003eConfirm polarity and tight connections before applying load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These BougeRV 10ft 10AWG solar extension cables suit DIY solar installers, RV and marine owners, vanlifers, and small off-grid systems that need dependable, low-loss connections between panels and controllers. If you want thicker-than-basic panel leads with secure locking connectors and outdoor-rated insulation for higher-current or longer-run setups, this cable pair is a practical upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these cables with any MC4 solar panel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the male and female MC4-style connectors are compatible with most standard panels; always verify connector type before connecting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is 10 AWG necessary for short runs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For very short runs under a few feet 12 AWG may suffice, but 10 AWG reduces voltage drop for higher currents and provides extra margin.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54200265932984,"sku":"B0753ZLLQB","price":69.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-10awg-front-connectors.jpg?v=1790609558"},{"product_id":"bougerv-12-piece-solar-connector-kit-8awg-ip68-waterproof-6-pairs-male-female-low-resistance-with-spanners","title":"BougeRV 12‑Piece Solar Connector Kit 8AWG IP68 Waterproof — 6 Pairs Male\/Female, Low-Resistance with Spanners","description":"\u003cstrong\u003eBougeRV 12 PCS Solar Connector Kit is a weatherproof set of heavy-duty 8AWG male and female solar panel cable connectors with spanners for secure, tool-assisted joins.\u003c\/strong\u003e\n\n\u003cp\u003eThis connector kit gives you robust, low-resistance connections for 8AWG PV cables and is built to withstand outdoor conditions. Designed for higher-current systems, the set includes extra pins, sealed housings, and simple mechanical spanners to tighten or release the mating halves. The materials and IP68 rating mean these connectors work reliably on roofs, RVs, boats, and ground-mounted arrays without frequent maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors handle higher current solar setups?\u003c\/h3\u003e\n\u003cp\u003eThese BougeRV connectors are sized for 8AWG conductors and designed to keep voltage drop and heat under control in systems above 30A. The tinned copper pins provide good conductivity, and the housing accepts a range of cable insulation diameters for flexibility during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 14–8 AWG (2.5–8 mm²) PV cables\u003c\/li\u003e\n  \u003cli\u003eTinned copper conductor pins for stable current flow\u003c\/li\u003e\n  \u003cli\u003eLow contact resistance to reduce heat at junctions\u003c\/li\u003e\n  \u003cli\u003eRecommended for systems where current exceeds 30A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these connectors waterproof and durable outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe male connector includes a sealing ring and the housings use PPO insulation, a material resistant to UV and aging. Those design choices help prevent moisture ingress and protect the metal contacts from corrosion in rain, snow, or strong sunlight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68-rated sealing for protection against dust and water immersion\u003c\/li\u003e\n  \u003cli\u003ePPO plastic housings with UV and aging resistance\u003c\/li\u003e\n  \u003cli\u003eSealed mating face and O-ring on male connector\u003c\/li\u003e\n  \u003cli\u003eSturdy construction for long outdoor service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is plug-and-play for electricians and experienced DIYers, and includes two spanners to tighten or separate the connectors cleanly without damaging the shells. It also supplies seven pairs of conductor pins so you have a spare pair in case of assembly errors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with spanners for secure mating and safe separation\u003c\/li\u003e\n  \u003cli\u003eSeven pairs of pins (one spare pair) to avoid rework delays\u003c\/li\u003e\n  \u003cli\u003eClear cable size range for quick selection and crimping\u003c\/li\u003e\n  \u003cli\u003eSimple male-to-female coupling with positive latch engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit different panel and cable configurations?\u003c\/h3\u003e\n\u003cp\u003eYes — the sockets accept a variety of insulation diameters and the pin design supports common PV cable standards. That flexibility makes the kit useful when matching existing arrays or when upgrading to thicker, lower-loss conductors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts multiple insulation diameters for cable adaptability\u003c\/li\u003e\n  \u003cli\u003eStandard MC-style form factor for wide compatibility\u003c\/li\u003e\n  \u003cli\u003eWorks with both new installations and retrofits\u003c\/li\u003e\n  \u003cli\u003eSpare pins reduce downtime during installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, RV and boat owners, and homeowners upgrading solar systems who need reliable, waterproof, high-current connectors. If you require durable outdoor-rated joins for 8AWG PV wiring and value simple, tool-assisted assembly with spare parts included, this BougeRV kit is aimed at you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these compatible with standard MC4 connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these are BougeRV 8AWG connectors with a similar MC-style design but not interchangeable with factory MC4 pins.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; the kit includes spanners, though proper crimping or soldering tools are recommended for pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54200289296568,"sku":"B09YM1Y4FB","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-packaging.jpg?v=1790610072"},{"product_id":"bougerv-flexible-solar-panel-butyl-rubber-tape-3-98-x-16-4ft-waterproof-high-adhesion","title":"BougeRV Flexible Solar Panel Butyl Rubber Tape 3.98\" x 16.4ft — Waterproof, High-Adhesion","description":"\u003cb\u003eBougeRV Flexible Solar Panel Butyl Rubber Tape is a waterproof, high-adhesion mounting tape designed to securely bond flexible solar panels to RVs, boats, and roofs.\u003c\/b\u003e\n\n\u003cp\u003eIf you plan to mount a flexible solar panel where mechanical fasteners are impractical or you want a low-profile, watertight bond, this 3.98\" x 16.4 ft butyl rubber tape provides a long, conformable sealing layer engineered for solar installations. The tape is formulated to stick firmly to smooth surfaces like metal and glass, resist corrosion and water intrusion, and accommodate the contours of curved roofs and hulls.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tape make flexible solar panel installation easier?\u003c\/h3\u003e\n\u003cp\u003eThe tape removes the need for drilling holes and running complex mounting hardware, letting you create a continuous adhesive seal between the panel and the substrate. It can be cut to length and pressed into place quickly, reducing installation time and minimizing potential leak points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCuts easily with scissors or a utility knife for custom lengths\u003c\/li\u003e\n  \u003cli\u003eConforms to curved or irregular surfaces for flush adhesion\u003c\/li\u003e\n  \u003cli\u003eProvides an immediate tack so panels stay positioned during final press-down\u003c\/li\u003e\n  \u003cli\u003eEliminates many mechanical fasteners that can cause leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and panels is the BougeRV tape compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe butyl rubber adhesive is formulated for most flexible solar panels and adheres best to clean, smooth surfaces such as metal and glass. It works on RV roofs, boat decks, and many roof membranes when surfaces are properly prepared.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for flexible solar panels up to typical 100W sizes using the 16.4 ft length\u003c\/li\u003e\n  \u003cli\u003eBest results on smooth, non-porous substrates like aluminum, steel, and glass\u003c\/li\u003e\n  \u003cli\u003eAdhesion to textured or porous surfaces may be limited—surface prep required\u003c\/li\u003e\n  \u003cli\u003eResistant to water and corrosion for marine and outdoor exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the butyl rubber tape?\u003c\/h3\u003e\n\u003cp\u003eThe tape is formulated to maintain adhesion and a watertight seal under outdoor conditions, resisting corrosion and moisture that can weaken ordinary adhesives. While durable, removal can leave residue and requires solvents for cleanup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof and corrosion-resistant for long-term outdoor exposure\u003c\/li\u003e\n  \u003cli\u003eRemains flexible to accommodate thermal expansion and surface movement\u003c\/li\u003e\n  \u003cli\u003eNot intended as a structural fastener—pair with appropriate attachment practices for severe conditions\u003c\/li\u003e\n  \u003cli\u003eUse 98% alcohol or diesel solvent to remove adhesive residue if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the recommended steps and tips for a reliable installation?\u003c\/h3\u003e\n\u003cp\u003ePreparation is crucial: clean and dry both the panel backing and the mounting surface, then measure, cut, and apply the tape before pressing the panel into place. Proper application ensures a strong, leak-resistant bond.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThoroughly clean surfaces to remove dirt, oil, and oxidation before application\u003c\/li\u003e\n  \u003cli\u003eMeasure and cut tape to the required lengths; press evenly to avoid air pockets\u003c\/li\u003e\n  \u003cli\u003eApply the tape to the panel back first, then align and press the panel onto the surface\u003c\/li\u003e\n  \u003cli\u003eFor best adhesion, apply to metal or glass; allow firm contact pressure for full bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Installers and DIYers who want a low-profile, waterproof adhesive solution for mounting flexible solar panels on RVs, boats, or building roofs will find BougeRV's butyl rubber tape useful. It’s ideal when you need a conformable seal without extensive hardware, provided you apply it to clean, smooth substrates and understand removal may require solvents.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tape hold a 100W flexible solar panel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 16.4 ft length is sized to mount typical 100W flexible panels when applied correctly to clean, smooth surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I remove tape residue after uninstalling a panel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use 98% alcohol or diesel to soften residue, then scrape gently; some staining or leftover material may remain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54200605704376,"sku":"B0D3CVXDH4","price":92.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-tape-roll-front-view.jpg?v=1790615916"},{"product_id":"bougerv-solar-inline-fuse-holders-5pc-15a-ip67-waterproof-ceramic-fuse-locking-connector","title":"BougeRV Solar Inline Fuse Holders 5PC 15A – IP67 Waterproof, Ceramic Fuse \u0026 Locking Connector","description":"\u003cp\u003e\u003cstrong\u003eBougeRV 5PCS 15A inline solar fuse holders are compact, IP67-rated connectors with a ceramic fuse tube that protect solar panels and controllers by breaking the circuit if current exceeds 15 amps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese inline photovoltaic (PV) fuse holders combine a standard solar connector on each end with a replaceable ceramic fuse inside, offering a simple plug-and-play way to add overcurrent protection to solar arrays, cable runs, and charge controllers. Constructed from UV-resistant PPO and featuring a locking male connector plus a waterproof ring, each unit is designed to stay stable outdoors across a wide temperature range. Certified by TÜV and CE, this five-piece pack gives you spare fuses for building or maintaining off-grid systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this inline fuse holder protect my solar setup?\u003c\/h3\u003e\n\u003cp\u003eThe holder interrupts the electrical path when current rises above the fuse rating, preventing excessive current from reaching sensitive devices like solar controllers or inverters. Because the fuse is a ceramic tube, it withstands heat and provides reliable interruption without damaging the connector housing. Using inline fuses local to panels or controllers reduces the risk of cable overheating and component failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15A rated ceramic fuse inside each holder for consistent overcurrent interruption\u003c\/li\u003e\n  \u003cli\u003eBreaks the circuit fast to reduce risk of downstream damage\u003c\/li\u003e\n  \u003cli\u003eSuitable for PV strings, controller inputs, and short cable protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these holders weatherproof and suitable for outdoor installation?\u003c\/h3\u003e\n\u003cp\u003eYes — the male connector includes an IP67 waterproof sealing ring to keep moisture and dust out when connected, and the PPO housing resists UV degradation so it remains durable in sunlight. The built-in lock on the male connector secures the connection against vibration and wind. Still, ensure connectors are properly mated and sealed in line with manufacturer guidance for long-term exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67-rated waterproof ring for reliable outdoor protection\u003c\/li\u003e\n  \u003cli\u003eUV- and aging-resistant PPO housing for extended field use\u003c\/li\u003e\n  \u003cli\u003eLocking male connector to maintain stable outdoor connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install or replace the fuse in these inline holders?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: unplug the solar connectors, unlock the housing if applicable, replace the ceramic fuse tube with the same 15A type, then reconnect and secure the lock. The plug-and-play design works with standard solar cables and connectors, so no special tools are typically required. Always confirm system voltage and current limits and power down the circuit before servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect power before handling to avoid electrical hazard\u003c\/li\u003e\n  \u003cli\u003eSwap in a 15A ceramic fuse tube of matching dimensions\u003c\/li\u003e\n  \u003cli\u003eRe-seat connectors and verify lock engagement and waterproof seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat operating conditions and limits should I be aware of?\u003c\/h3\u003e\n\u003cp\u003eThe holders are rated to function from -40°C to +90°C and are designed for typical PV system voltages; however, operating current must not exceed the 15A fuse rating. At ambient temperatures above 60°C, current derating is recommended to avoid nuisance blows. These units are TÜV and CE certified, offering recognized safety assurance when used within specified limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature: -40°C to +90°C (-40°F to +194°F)\u003c\/li\u003e\n  \u003cli\u003eFuse rating: 15A — do not exceed rated current\u003c\/li\u003e\n  \u003cli\u003eCurrent derating advised above 60°C (140°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, RV and camper van owners, small off-grid homeowners, and DIY solar hobbyists will find this BougeRV 5-pack useful for adding localized overcurrent protection to panels, combiner boxes, and controller inputs. The compact, weatherproof design suits rooftop, ground-mounted, and mobile PV systems where a simple, replaceable fuse solution is preferred. If you need reliable, certified inline PV protection with spare units included, this product provides a convenient option backed by 18 months of technical support from BougeRV.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these fuse holders be used with any solar cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They work with standard solar connectors; ensure cable size and system voltage match the product specifications before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What should I do if the fuse blows frequently?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check for overcurrent causes, confirm the 15A rating is appropriate, and inspect wiring and connections for faults or short circuits.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54202372260024,"sku":"B08L56RDNP","price":87.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-view-inline-fuse-holder.jpg?v=1790618086"},{"product_id":"bougerv-solar-crimper-tool-kit-with-integrated-dies-6-pairs-mc4-connectors-ergonomic-padded-handles","title":"BougeRV Solar Crimper Tool Kit with Integrated Dies, 6 Pairs MC4 Connectors — Ergonomic Padded Handles","description":"\u003cp\u003e\u003cstrong\u003eThe BougeRV Solar Crimper Tool Kit is a compact, all-in-one crimping set built to make solar MC4 connector installations faster, more accurate, and repeatable.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines a molded crimper, built-in dies, six pairs of solar connectors, and a matching spanner so you can assemble and secure PV cable connections on-site without swapping multiple tools. Designed for installers, hobbyists, and maintenance crews, the set prioritizes consistent crimps for 2.5, 4, and 6 mm² conductors and includes ergonomic touches to reduce hand fatigue during repeated use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the crimper ensure consistent crimps every time?\u003c\/h3\u003e\n\u003cp\u003eThe tool uses purpose-shaped crimping cavities that lock in place for the listed wire sizes. That means each squeeze compresses the metal sleeve uniformly, reducing variability between connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded dies matched to 2.5 \/ 4 \/ 6 mm² cable diameters\u003c\/li\u003e\n  \u003cli\u003ePositive lock design holds the crimp while compressing\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction for minimal deformation over repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how does it speed installation?\u003c\/h3\u003e\n\u003cp\u003eThe package includes a pair of crimpers with integrated dies, six pairs of solar panel connectors (MC4-style), and a connector spanner to tighten fittings. Having every commonly needed piece in one kit eliminates tool runs and reduces the time spent switching between items.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 pair wire crimper with stored dies for quick size selection\u003c\/li\u003e\n  \u003cli\u003e6 pairs of solar connectors ready for cable assembly\u003c\/li\u003e\n  \u003cli\u003e1 connector spanner to tighten or loosen panel fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the grip and ergonomics suitable for long jobs?\u003c\/h3\u003e\n\u003cp\u003eThe handles feature an energy-saving profile that makes repetitive crimping less fatiguing. The built-in die storage in the handles keeps replacements close at hand for efficient workflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePadded, shaped handles for improved comfort and torque control\u003c\/li\u003e\n  \u003cli\u003eCompact length for use in tighter spaces around panels and combiner boxes\u003c\/li\u003e\n  \u003cli\u003eStored dies reduce downtime switching tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications is this crimping kit designed for?\u003c\/h3\u003e\n\u003cp\u003eIt’s tailored for solar PV systems where MC4-style cable connectors are standard—residential arrays, small commercial installs, and field maintenance. The specified crimp sizes cover the common PV cable gauges used in these settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMC4 connector assembly and maintenance\u003c\/li\u003e\n  \u003cli\u003eOn-site PV string installations and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eHome solar DIY projects and professional service kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, electricians, and solar DIYers who need a compact, reliable crimping solution that bundles connectors and a tightening spanner for end-to-end PV cable workflow. If you install or maintain solar panels and want consistent mechanical crimps for 2.5–6 mm² conductors without carrying a large toolbag, this BougeRV kit is designed to save time and improve connection quality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes does this crimper support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit crimper supports 2.5, 4, and 6 mm² conductors, covering common PV cable gauges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors included compatible with MC4 systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—six pairs of solar connectors provided are intended for standard MC4-style photovoltaic connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54204135899320,"sku":"B078B7N3WD","price":81.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-crimper-front-view.jpg?v=1790624613"},{"product_id":"bougerv-10awg-solar-panel-connectors-22-pair-kit-ip67-waterproof-with-spanners","title":"BougeRV 10AWG Solar Panel Connectors 22-Pair Kit IP67 Waterproof with Spanners","description":"\u003cp\u003e\u003cstrong\u003eThe BougeRV 44PCS solar connector kit is a complete 22-pair, IP67-rated 10AWG male\/female connector set with spanners, made for secure, weatherproof solar panel and cable joins.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re wiring a rooftop array, assembling an RV system, or creating a portable solar setup, reliable connectors are essential. This BougeRV kit bundles 22 pairs of matched male and female connectors built to 10AWG specifications, plus the spanners required for tightening. The connectors are engineered for outdoor exposure with an IP67 waterproof rating and corrosion-resistant contacts to keep circuits stable in wet or dusty conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors protect my solar connections outdoors?\u003c\/h3\u003e\n\n\u003cp\u003eThese connectors use sealed housings and a precision fit between male and female ends to block moisture and particulate ingress. The IP67 rating means components stay dry during heavy rain and brief immersion, reducing the risk of shorts and connection loss. Corrosion-resistant metal surfaces and durable insulating jackets extend service life in coastal or high-humidity environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP67-rated sealing prevents water and dust intrusion.\u003c\/li\u003e\n  \u003cli\u003eStainless or tinned contacts resist corrosion from salt and moisture.\u003c\/li\u003e\n  \u003cli\u003eRobust insulating shells shield the contact area from UV and impact.\u003c\/li\u003e\n  \u003cli\u003ePositive locking design keeps connectors mated under vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors easy to install on 10AWG solar cable?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the kit is designed for 10AWG (approximately 6 mm²) conductors and includes the correct sized crimping and tightening spanners. Termination follows standard stripping, crimping\/soldering (if preferred), and torqueing procedures so novices can achieve professional results. Clear polarity markings help prevent wiring mistakes during assembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 10AWG conductors without modification.\u003c\/li\u003e\n  \u003cli\u003eSupplied spanners to achieve recommended torque for secure joints.\u003c\/li\u003e\n  \u003cli\u003eColor-coded\/matched male and female pairs simplify polarity identification.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common solar cable styles and tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and mechanical specs should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe connectors are sized and rated for typical solar system currents and voltages when used within manufacturer limits. Solid contacts ensure low contact resistance and consistent conductivity to maintain efficient power transfer. The mechanical design handles vibration and repeated connects\/disconnects common in mobile and outdoor installations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e22 matched male\/female pairs (44 pieces total).\u003c\/li\u003e\n  \u003cli\u003eDesigned for 10AWG cable, appropriate for mid-range PV arrays and battery leads.\u003c\/li\u003e\n  \u003cli\u003eLow-resistance contacts for efficient energy transfer.\u003c\/li\u003e\n  \u003cli\u003eRobust housing resists impact, UV, and weathering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I use this kit safely with my solar array?\u003c\/h3\u003e\n\n\u003cp\u003eFollow standard electrical safety practices: isolate circuits, confirm polarity, and torque fittings to the recommended specification. Use proper wire-stripping and crimping tools or a qualified technician for termination. Regularly inspect connectors for wear, secure mating, and replace any that show damage or excessive corrosion.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAlways disconnect PV strings or isolate panels before working.\u003c\/li\u003e\n  \u003cli\u003eUse the included spanners and check torque after initial installation.\u003c\/li\u003e\n  \u003cli\u003ePerform periodic visual inspections and clean contacts as needed.\u003c\/li\u003e\n  \u003cli\u003eReplace damaged connectors to maintain waterproof integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BougeRV 44PCS connector kit is aimed at homeowners, RV and marine owners, solar installers, and DIYers who need a complete set of rugged, matched connectors for 10AWG solar cable. It’s a practical choice for anyone building or servicing small- to mid-sized solar systems that demand weatherproof, low-resistance connections and the right tools to install them correctly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these connectors fit 10AWG solar cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit is made for 10AWG conductors and includes spanners for proper torque and secure terminations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are IP67-rated, designed to resist dust and temporary immersion, suitable for outdoor solar installations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54204150841528,"sku":"B07875Y7N9","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-connector-front-packaging.jpg?v=1790625042"},{"product_id":"bougerv-20ft-10awg-solar-extension-cable-pair-red-black-ip67-sealed-connectors-tinned-copper","title":"BougeRV 20ft 10AWG Solar Extension Cable Pair — Red \u0026 Black, IP67 Sealed Connectors, Tinned Copper","description":"\u003cp\u003e\u003cstrong\u003eBougeRV's 20-foot 10AWG solar extension cable pair delivers heavy-gauge, weather-resistant connections so you can extend panels with lower voltage drop and reliable outdoor performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need to move or separate solar panels from an array, this 20-foot set (one red, one black) provides thicker 10AWG conductors, factory-installed male and female connectors on one end, and bare tinned leads on the other for easy hookup to controllers or junctions. Built for outdoor arrays, the cable combines tinned pure copper conductors, XLPE dual-sheath insulation and IP67-rated connector sealing to resist corrosion, UV and extreme temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 10AWG gauge improve my solar setup?\u003c\/h3\u003e\n\u003cp\u003eA larger 10AWG conductor reduces resistance compared with thinner 12AWG or 14AWG wires, cutting voltage drop on longer runs and helping panels deliver more usable power to your charge controller or inverter. The tinned coating also improves longevity in outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThicker 10AWG reduces electrical losses on runs like 10–20 feet.\u003c\/li\u003e\n  \u003cli\u003eTinned pure-copper conductors resist corrosion and improve connectivity.\u003c\/li\u003e\n  \u003cli\u003eDesigned to pair with typical RV, marine and off-grid panel systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these cables survive outdoor exposure and temperature swings?\u003c\/h3\u003e\n\u003cp\u003eYes—the dual XLPE\/PVC sheath and UV-resistant jacket are formulated for outdoor mounting and can handle a wide operating range from -40°F to 194°F, exceeding many standard PV cables. The male connector includes an IP67 waterproof ring and a mechanical lock to keep moisture and dust out of the connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eXLPE insulation for high heat tolerance and mechanical protection.\u003c\/li\u003e\n  \u003cli\u003eIP67-rated sealing on male connector to prevent water ingress.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant jacket for long-term sun exposure outdoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and integrate with existing systems?\u003c\/h3\u003e\n\u003cp\u003eOne end arrives with plug-and-play male and female connectors already attached; the opposite end is tinned bare wire for direct termination to controllers, combiner boxes, or custom fittings. The connectors feature a built-in latch that releases with finger pressure, so you can connect or disconnect quickly without tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed connectors for fast field use.\u003c\/li\u003e\n  \u003cli\u003eBare tinned leads on the opposite end for soldering or crimp termination.\u003c\/li\u003e\n  \u003cli\u003eIncluded extra connector gives flexibility for expanded layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety certifications and protections does this cable offer?\u003c\/h3\u003e\n\u003cp\u003eBougeRV cables are TÜV and UL certified, meeting safety and performance standards for photovoltaic components. The combination of tinned conductors, robust insulation, and a locking, sealed connector reduces the risk of corrosion, shorting and mechanical failure in outdoor installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTÜV and UL certifications for compliance with PV component standards.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant tinned copper for longer service life.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in connector lock for secure, vibration-resistant joints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you run RV, marine, cabin, or off-grid solar systems and need a reliable way to extend panel placement without sacrificing performance, this BougeRV 20-foot 10AWG pair is designed for you. Installers and DIYers who value lower voltage drop, durable outdoor-rated materials, and simple plug-and-play connections will find this cable set especially useful. BougeRV also includes 18 months of technical support to help with fit and installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this 10AWG extension for a 12V RV solar system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 10AWG pair reduces voltage drop on 12V systems and is compatible with typical RV panels and charge controllers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The male connector has an IP67 waterproof ring and the cable jacket is UV resistant for outdoor installations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54204170862776,"sku":"B075424L8R","price":96.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-20ft-10awg-front-packaging.jpg?v=1790625234"},{"product_id":"bougerv-solar-crimper-tool-kit-14-10-awg-pv-crimper-with-12-pairs-ip67-connectors-2-spanners","title":"BougeRV Solar Crimper Tool Kit — 14–10 AWG PV Crimper with 12 Pairs IP67 Connectors, 2 Spanners","description":"\u003cstrong\u003eBougeRV Solar Crimper Tool Kit is a compact, all-in-one set for making and repairing PV cable connections using 14–10 AWG wires.\u003c\/strong\u003e\n\n\u003cp\u003eWhether you’re building an RV solar array, fixing a marine panel lead, or assembling extension cables for an off-grid cabin, this kit gathers the main items you need: a high-precision crimper, IP67-rated PV connectors in three sizes, two spanners for quick hookups, and a soft carrying case. The tools and parts are selected for outdoor durability and straightforward operation so both beginners and experienced installers can complete reliable connections on site.\u003c\/p\u003e\n\n\u003ch3\u003eHow accurate and durable is the crimper for PV cables?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV crimper is made from high-carbon steel and engineered for a precise jaw fit, optimized for 14–10 AWG conductors. The metal construction resists wear from repeated use, while the ergonomic handle helps reduce hand fatigue during multiple crimps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-carbon steel jaws for long life and consistent crimps\u003c\/li\u003e\n  \u003cli\u003ePrecision die shape sized for 14–10 AWG solar cable\u003c\/li\u003e\n  \u003cli\u003eErgonomic grips for improved comfort during repetitive tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do the connectors and IP67 rating mean for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes 12 pairs of BougeRV PV connectors in 2.5, 4, and 6 mm² dimensions, molded from PPO material with integrated waterproof rings. An IP67-style sealing approach helps keep moisture and dust out of the mating faces, improving reliability in exposed rooftop or marine environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 pairs covering common solar cable cross-sections (2.5\/4\/6 mm²)\u003c\/li\u003e\n  \u003cli\u003ePPO material housings for UV and weather resistance\u003c\/li\u003e\n  \u003cli\u003eSeal rings designed to block water ingress during outdoor exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit simplify installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eIncluded spanners allow fast hand-tightening or loosening of connector housings without needing extra tools, and the carrying case keeps parts organized for on-site work. BougeRV also provides an installation video to guide users step-by-step through stripping, crimping, and sealing connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo spanners sized for quick connector assembly and disassembly\u003c\/li\u003e\n  \u003cli\u003eCompact carrying case for portable, organized storage\u003c\/li\u003e\n  \u003cli\u003eInstallation video linked for visual, stepwise instruction\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit handle DIY and professional tasks?\u003c\/h3\u003e\n\u003cp\u003eThis set balances user-friendly features with robust components suitable for routine installer tasks. While ideal for DIYers building or repairing PV leads, it also supplies reliable crimp quality and weatherproof connectors appropriate for small commercial or service work where 14–10 AWG cables are used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood fit for RV, boat, tiny-house, and rooftop panel cable work\u003c\/li\u003e\n  \u003cli\u003eSupports both new cable assembly and field repairs\u003c\/li\u003e\n  \u003cli\u003eNot intended for cable sizes outside the 14–10 AWG range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BougeRV Solar Crimper Tool Kit is aimed at RV owners, boaters, vanlifers, and hobbyists who want a reliable, on-the-go solution for creating and repairing PV cable connections. It also serves solar technicians performing small installations or maintenance where compact, dependable tools and sealed connectors are needed. Verify your wire gauge fits the 14–10 AWG range before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes does this crimper support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The crimper is designed for 14–10 AWG wires (approximately 2.5–6 mm²).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the PV connectors waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the connectors use PPO housings with waterproof rings rated for outdoor exposure (IP67-style).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54204182397112,"sku":"B0FFMQ9QBX","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-tool-kit-front-view.jpg?v=1790625594"},{"product_id":"bougerv-solar-panel-t-slot-mounting-kit-for-t-track-crossbars-steel-100-200w-ready","title":"BougeRV Solar Panel T-Slot Mounting Kit for T-Track Crossbars — Steel, 100–200W Ready","description":"\u003cp\u003e\u003cstrong\u003eBougeRV's T-slot solar panel mounting kit secures 100–200W solar panels to vehicle crossbars that have T-track channels, giving a robust, road-ready rooftop attachment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor vanlifers, overlanders, and weekend campers who want a dependable way to mount medium-sized solar panels, this kit fits crossbars with T-shaped tracks and supplies everything needed to attach panels without drilling into the roof. Built from steel with anti-vibration testing and protective rubber pads, the system balances strength and surface protection so panels stay put during travel.\u003c\/p\u003e\n\n\u003ch3\u003eWill this mounting kit work with my roof rack crossbars?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV kit is built exclusively for crossbars that feature a T-slot or T-track channel. It includes M6 T-bolts engineered to slide into most T-shaped tracks, but you should check dimensions and available channel length before buying.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with many T-track crossbars using the included M6 T-bolts.\u003c\/li\u003e\n\u003cli\u003eConfirm the distance between installed brackets does not exceed your crossbar's T-slot length.\u003c\/li\u003e\n\u003cli\u003eNot intended for non-T-slot or round-bar racks without adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much weight and what panel sizes can this hold?\u003c\/h3\u003e\n\u003cp\u003eThis heavy-duty version is made from steel and tested under repeated vibration to ensure the panel remains secure on the road. It is designed to support common 100W to 200W flat solar panels used on vehicles and RV roofs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for most 100W, 180W, and 200W panels.\u003c\/li\u003e\n\u003cli\u003eSteel construction offers durable load-bearing and wind resistance.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing rubber pads reduce movement and protect the panel and rack surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic hand tools. The package arrives with pre-set T-bolts attached to the mounting brackets and includes additional hardware and tools to finish the build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes four mounting brackets with pre-installed M6 T-bolts.\u003c\/li\u003e\n\u003cli\u003eComes with two self-tapping screws for DIY panel attachment, two Allen keys, and one wrench.\u003c\/li\u003e\n\u003cli\u003eRubber pads are provided to protect the mounting surface and increase grip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it perform in rough conditions and while driving?\u003c\/h3\u003e\n\u003cp\u003eThe mounts have been tested for endurance and vibration to simulate road use, helping ensure the panel stays attached through bumpy roads and variable weather. Protective pads and tight hardware minimize rattling and wear on rack surfaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteel construction tested with extended vibration cycles for reliable retention.\u003c\/li\u003e\n\u003cli\u003eRubber shock-absorbers cushion impacts and prevent scratches.\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain stability in transit and during outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BougeRV T-slot solar panel mounting kit is aimed at travelers and outdoor enthusiasts who have T-track crossbars on their vehicle and want a sturdy, no-drill solution for mounting medium-sized solar panels. It fits those who need a durable bracket system that protects rack surfaces, supports common 100–200W panels, and comes with the necessary hardware and tools for a quick install. If your crossbars do not include a T-slot channel, consider compatible adapters or a different mounting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit all roof rack types?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It only fits crossbars with T-slot\/T-track channels using M6 T-bolts. Measure your T-slot length before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it hold a 200W solar panel on highway drives?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The steel brackets and vibration-tested design are intended to secure 100–200W panels during normal driving conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54205474439352,"sku":"B0CHMN2PZM","price":125.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-view-mounted-kit.jpg?v=1790643382"},{"product_id":"bougerv-10awg-solar-mc4-style-connectors-kit-100-pcs-50-pairs-ip67-waterproof-tinned-copper-pins","title":"BougeRV 10AWG Solar MC4-Style Connectors Kit 100 pcs (50 Pairs) IP67 Waterproof, Tinned Copper Pins","description":"\u003cp\u003e\u003cstrong\u003eBougeRV 100 PCS 10AWG Solar Connectors are a kit of 50 male\/female pairs plus extra pins and spanners that create durable, weatherproof connections for PV cable installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles bulk MC4-style connectors, tinned copper pins, and two spanners so you can assemble and repair solar leads for panels, RV roofs, or ground-mounted arrays without buying premade cables. The connectors accept 13–10 AWG insulation diameters, feature a rubber sealing ring for IP67-level protection, and are molded from UV-resistant PPO for long outdoor life. Everything is organized to help DIYers and installers make secure, high-current joins while keeping costs down.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors handle high-current solar systems?\u003c\/h3\u003e\n\n\u003cp\u003eThe conductor pins are tinned copper, which improves conductivity and corrosion resistance after proper crimping and assembly. The design supports heavy loads and maintains a solid mechanical and electrical joint when used with the recommended crimper tool.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTinned copper pins for reliable conductivity and reduced corrosion.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 10 AWG cable sizes for higher current capacity.\u003c\/li\u003e\n  \u003cli\u003eCrimp-and-lock assembly ensures stable electrical contact under load.\u003c\/li\u003e\n  \u003cli\u003eExtra spare pins (5 pairs) included for replacements during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors waterproof and suitable for outdoor use?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the connectors include a rubber sealing ring and a tightly threaded housing to keep out water and dust, achieving IP67-level protection when properly assembled. The PPO housing resists UV degradation, so the terminations stay functional in sun, rain, and snow.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRubber waterproof ring seals the mated connection against moisture.\u003c\/li\u003e\n  \u003cli\u003ePPO plastic housing rated for UV and aging resistance outdoors.\u003c\/li\u003e\n  \u003cli\u003eIP67-level protection when connectors are fully tightened and sealed.\u003c\/li\u003e\n  \u003cli\u003eDurable in varied weather: rain, wind, and prolonged sun exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included and how does it simplify installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit provides 50 male\/female connector pairs, 55 pairs of metal pins for conductor termination, plus a pair of spanners to tighten housings. Having bulk parts and hand tools on hand lets you custom-build cable lengths or repair existing runs quickly without ordering factory-built assemblies.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e50 connector pairs (male and female) for multiple runs or spares.\u003c\/li\u003e\n  \u003cli\u003e55 pairs of crimpable metal pins, including 5 spare pairs for mistakes.\u003c\/li\u003e\n  \u003cli\u003eTwo spanners included to tighten housings and ensure a weatherproof seal.\u003c\/li\u003e\n  \u003cli\u003eSaves cost versus buying preterminated cables and supports onsite tailoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich cable sizes and applications are compatible with this kit?\u003c\/h3\u003e\n\n\u003cp\u003eThese connectors accommodate PV cable insulation diameters from 13 AWG to 10 AWG, making them suitable for most residential and mobile solar setups. They work well on RV rooftops, small ground arrays, battery-to-panel leads, and other DC solar connections where secure, weatherproof junctions are required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with common solar cable sizes from 13 AWG up to 10 AWG.\u003c\/li\u003e\n  \u003cli\u003eGood for rooftop RV arrays, small-to-medium ground-mounted arrays, and repair work.\u003c\/li\u003e\n  \u003cli\u003eSuitable for creating custom-length PV extension leads and branch circuits.\u003c\/li\u003e\n  \u003cli\u003eRequires a crimper tool (recommended model referenced in product materials) for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BougeRV kit is aimed at homeowners, RV owners, electricians, and solar installers who want cost-effective, heavy-duty connectors for building or repairing PV cable runs. It's especially useful for DIYers who prefer assembling custom-length cables, installers stocking parts for multiple jobs, and anyone needing weatherproof, long-lived terminations without ordering premade leads.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these connectors fit 10 AWG solar cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with 13–10 AWG insulation diameters and supports 10 AWG conductors when crimped correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the connectors weatherproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. When assembled with the rubber sealing ring and tightened, they provide IP67-level protection against water and dust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54205814866104,"sku":"B09L7J4N88","price":144.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-packaging_e90848ef-f541-40e8-8b12-97eb75ac72b6.jpg?v=1790646344"},{"product_id":"bougerv-solar-branch-connectors-2-to-1-y-adapter-fmm-mff-5-pairs-ip67-tool-free","title":"BougeRV Solar Branch Connectors 2-to-1 Y Adapter FMM+MFF, 5 Pairs — IP67, Tool-Free","description":"\u003cp\u003e\u003cstrong\u003eBougeRV Solar Branch Connectors are outdoor-rated 2-to-1 MC4-style Y adapters (one male to two female and one female to two male) supplied as five pairs for paralleling or splitting 14–10 AWG solar runs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese Y branch connectors let you combine or split photovoltaic circuits quickly without soldering: the kit contains matched M\/FF and F\/MM adapters constructed from PPO with tinned copper contacts, TÜV certification, and IP67 sealing for long-term external use. They’re built for temperatures from -40°F to 230°F and designed for plug-and-play installation on common solar cables and connectors, making them a practical accessory for small arrays, RV systems, and portable setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these connectors simplify wiring a small solar array?\u003c\/h3\u003e\n\u003cp\u003eUse the 2-to-1 Y adapters to join two panel outputs into a single feed or to split one output to run two in parallel. The male-to-female (M\/FF) and female-to-male (F\/MM) options let you match polarity and connector types without cutting or modifying factory leads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombine two panels into one MPPT\/charge controller input for higher current.\u003c\/li\u003e\n  \u003cli\u003eSplit a single panel output to feed two charge inputs or branch circuits.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common 14–10 AWG PV cables for straightforward hookups.\u003c\/li\u003e\n  \u003cli\u003eSold as five matched pairs for multiple parallel connections or spares.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these connectors durable enough for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eYes—each connector features an IP67 waterproof ring and a built-in dust seal to keep moisture and debris away from contacts. The PPO housing and tinned copper pins resist corrosion, and the parts are TÜV certified for safety and reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67-rated sealing protects against temporary immersion and dust ingress.\u003c\/li\u003e\n  \u003cli\u003ePPO material withstands UV exposure and outdoor conditions.\u003c\/li\u003e\n  \u003cli\u003eTinned copper contacts maintain conductivity and prevent oxidation.\u003c\/li\u003e\n  \u003cli\u003eOperational range from -40°F to 230°F for temperature resilience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and removal on site?\u003c\/h3\u003e\n\u003cp\u003eInstallation is tool-free: the connectors use a push-fit locking mechanism that releases by pressing on the built-in tabs. That makes on-roof or in-field changes faster and reduces the chance of wiring errors during maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play design—no crimping or soldering required if using compatible pre-terminated cables.\u003c\/li\u003e\n  \u003cli\u003eFinger-release locks allow quick disconnects during troubleshooting or reconfiguration.\u003c\/li\u003e\n  \u003cli\u003eWorks with standard 14–10 AWG PV leads for common solar setups.\u003c\/li\u003e\n  \u003cli\u003eIncluded pairs provide spares for future extensions or repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and support features come with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe connectors meet recognized safety standards and are engineered with secure locking and corrosion-resistant contacts. BougeRV also provides an 18-month tech support window to assist with compatibility or installation questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTÜV-certified components for verified electrical safety and performance.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in lock secures connections during vibration and outdoor exposure.\u003c\/li\u003e\n  \u003cli\u003e18-month technical support from the manufacturer for troubleshooting.\u003c\/li\u003e\n  \u003cli\u003eDesigned to pair with typical solar cable gauges (14–10 AWG).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, vanlifers, RV owners, backyard solar hobbyists, and small-system integrators who need reliable, weatherproof branching or paralleling of PV circuits will find these BougeRV Y branch connectors useful. They’re aimed at users who prefer clean, reversible connections without modifying panel leads and who want durable, certified components for outdoor solar projects. If you plan to expand or rearrange a small array, or need convenient spares for on-the-road repairs, this five-pair kit supplies compatible, rugged adapters ready for immediate use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these Y connectors fit my 12 AWG solar cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They accept cables from 14 AWG up to 10 AWG, so 12 AWG is compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these connectors outdoors in wet conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The IP67 seal and durable PPO housing protect contacts from water and dust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54206413930680,"sku":"B0891XRFQB","price":96.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-front-view-packaging.jpg?v=1790650351"},{"product_id":"bougerv-mppt-solar-charge-controller-40a-12-24v-with-app-control-low-temp-cut-off","title":"BougeRV MPPT Solar Charge Controller 40A — 12\/24V with APP Control \u0026 Low‑Temp Cut‑Off","description":"\u003cp\u003e\u003cstrong\u003eThe BougeRV Sunflow 40A MPPT is a 12V\/24V solar charge controller that delivers high-efficiency MPPT charging, app and LCD control, and low-temperature protection for LiFePO4 and multiple battery chemistries.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for RVs, boats, off-grid cabins and mobile systems, this 40 amp MPPT regulator combines precision charging with convenient monitoring. It supports LiFePO4, SLA (AGM, GEL), and other lead-acid types, offers an APP option for remote setup, and includes safety features to protect batteries and electronics while extracting maximum power from panels.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this controller improve solar charging performance?\u003c\/h3\u003e\n\u003cp\u003eThe Sunflow 40A uses MPPT (Maximum Power Point Tracking) to match panel output to battery needs, increasing harvest compared with PWM controllers. High tracking efficiency (up to 99.5%) and peak conversion near 99% help convert more solar energy into usable charge current.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMPPT tracking adjusts continuously to panel voltage and sunlight conditions.\u003c\/li\u003e\n  \u003cli\u003eCharge current adjustable from 0A to 40A for precise system tuning.\u003c\/li\u003e\n  \u003cli\u003eAluminum heat sink and dual MOS design reduce heat and energy loss under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery types and protections are included?\u003c\/h3\u003e\n\u003cp\u003eThe controller is compatible with LiFePO4, flooded (FLD), sealed lead acid (SLA), AGM, and GEL battery chemistries. It adds a low-temperature cut-off specifically to protect LiFePO4 cells and can revive dormant batteries that were turned off by protection circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-temp cut-off activates below 32°F to prevent unsafe LiFePO4 charging.\u003c\/li\u003e\n  \u003cli\u003eSix built-in protections: over-temperature, open-circuit, short-circuit, overload, reverse polarity, and backflow prevention.\u003c\/li\u003e\n  \u003cli\u003eAuto-detects and supports 12V or 24V systems; wakes display when battery connects first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I monitor and configure the controller?\u003c\/h3\u003e\n\u003cp\u003eYou can use the backlit LCD and onboard buttons for local setup or pair the unit with the BougeRV app for remote monitoring and parameter changes within roughly 32 feet. The display offers multiple interface modes so you can choose full control, simplified viewing, or no-load presentation depending on your needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemote app control with real-time solar, battery and load status via BougeRV APP (new) or legacy Solar APP.\u003c\/li\u003e\n  \u003cli\u003eSelectable display modes: full-featured, viewing-only, or no-load to simplify readouts.\u003c\/li\u003e\n  \u003cli\u003eOn-screen parameter adjustment for users who prefer not to use the mobile app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key electrical specifications and installation notes?\u003c\/h3\u003e\n\u003cp\u003eThe Sunflow 40A handles substantial PV input and is sized for small to medium off-grid systems. Proper wiring sequence and gauge are important for correct operation and recognition by the controller.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSystem voltage: 12V\/24V auto or manual selection.\u003c\/li\u003e\n  \u003cli\u003eMax PV input power: 600W @12V, 1200W @24V; max PV input voltage: 95V.\u003c\/li\u003e\n  \u003cli\u003eWire sizing recommended: 15-8 AWG; rated load current listed as 20A for load output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BougeRV Sunflow 40A MPPT controller suits RV and marine enthusiasts, tiny-home and cabin owners, and DIY off-grid integrators looking for efficient, app-enabled solar regulation. It’s particularly useful if you need LiFePO4-specific low-temperature protection or want the flexibility of both on-device and remote app control. Installers who value high conversion efficiency, multiple safety layers, and clear readouts will find this regulator a practical choice for 12V or 24V systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this controller work with LiFePO4 batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It supports LiFePO4 and includes a low-temperature cut-off and restart functions to protect and revive LiFePO4 batteries.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I monitor the controller remotely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use the BougeRV APP (new) or the older Solar APP within about 32 feet to view status and change settings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54208213811384,"sku":"B0CFKZ5Q97","price":325.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-sunflow-front-panel.jpg?v=1790659918"},{"product_id":"bougerv-200w-foldable-n-type-solar-panel-fiberglass-reinforced-portable-with-xt60-dc7909","title":"BougeRV 200W Foldable N‑Type Solar Panel – Fiberglass Reinforced, Portable with XT60\/DC7909","description":"\u003cp\u003e\u003cstrong\u003eThe BougeRV 200W Portable Solar Panel is a foldable N‑type solar charger built with fiberglass reinforcement for higher conversion efficiency, robust outdoor durability, and plug‑and‑play connectors for camping and off‑grid use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLightweight when folded yet capable when exposed to sun, this 200W panel blends advanced N‑type cells with a tough fiberglass backing so you get more power from the same footprint and a product that tolerates travel wear. It ships with common XT60 and DC7909 connectors plus an 8.2‑foot extension cable, making it simple to pair with BougeRV fridges, battery packs, and many power stations without extra adapters.\u003c\/p\u003e\n\n\u003ch3\u003eHow much power can I realistically expect from a 200W N‑type foldable panel?\u003c\/h3\u003e\n\u003cp\u003eN‑type cells convert sunlight more efficiently than older cell types, so this 200W panel produces higher output per square foot in equivalent sun conditions. Actual energy depends on sunlight intensity, panel angle, and temperature, but the panel’s N‑type construction means it achieves a stronger performance curve on bright days.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e200W peak rating under standard test conditions.\u003c\/li\u003e\n  \u003cli\u003eN‑type cells deliver up to roughly 25% better conversion than conventional panels.\u003c\/li\u003e\n  \u003cli\u003ePerformance varies with sun angle, shading, and ambient temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it durable enough for camping, RV trips, and regular transport?\u003c\/h3\u003e\n\u003cp\u003eThe panel uses a fiberglass‑reinforced layer to reduce cracking and resist abrasion—helpful when packing gear into tight spaces or mounting on rough surfaces. An IP65 rating adds protection from dust and light rain, so short exposures during outdoor use won’t immediately disable the unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFiberglass backing resists impact and prevents cracking during repeated use.\u003c\/li\u003e\n  \u003cli\u003eIP65 dust and water resistance guards against splashes and dusty campsites.\u003c\/li\u003e\n  \u003cli\u003eFoldable design with side handles minimizes strain while carrying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and connectors are included, and how do I hook it up?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV 200W panel arrives ready for quick setups: it includes XT60 and DC7909 outputs and an 8.2‑foot extension cable so you can place the panel in direct sunlight while your battery or power station stays conveniently positioned. No special tools are needed—just match the connector on your device or use a compatible adapter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded XT60 and DC7909 connectors for broad compatibility.\u003c\/li\u003e\n  \u003cli\u003e8.2 ft extension cable for flexible positioning and shade placement.\u003c\/li\u003e\n  \u003cli\u003ePlug‑and‑play wiring works with many portable fridges, power stations, and battery packs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable is the panel for packing, mounting, and daily use?\u003c\/h3\u003e\n\u003cp\u003eThe foldable format reduces storage bulk and the integrated side handles make hand carrying straightforward when you're moving from vehicle to campsite. Setup and breakdown are fast, so it’s convenient for day trips, weekend excursions, or seasonal use in an RV or cabin.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFolds into a compact package for easy storage in trunks or lockers.\u003c\/li\u003e\n  \u003cli\u003eBuilt‑in handles for simple transport between vehicle and campsite.\u003c\/li\u003e\n  \u003cli\u003eQuick to deploy and stow—saves time during camp setup and teardown.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you need a portable solar solution that balances higher energy conversion, ruggedness, and easy connectivity, this panel is tailored for outdoor enthusiasts, RV owners, overlanders, and anyone keeping portable appliances or power stations topped up on the go. It’s especially useful when you want stronger output than entry‑level cells offer but still demand lightweight, packable convenience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the panel work with my BougeRV fridge or power station?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—includes XT60 and DC7909 connectors compatible with many BougeRV fridges and common power stations; adapters may be needed for uncommon ports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the panel outside in light rain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The panel is IP65 rated for dust and light rain exposure, but avoid prolonged heavy downpours and submersion to protect connectors and electronics.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54208561479864,"sku":"B0G64CB1SX","price":451.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-200w-front-folded.jpg?v=1790665301"},{"product_id":"bougerv-2000w-pure-sine-wave-inverter-12v-to-120v-2000w-continuous-pure-sine-for-rvs-sensitive-electronics","title":"BougeRV 2000W Pure Sine Wave Inverter 12V to 120V — 2000W Continuous, Pure Sine for RVs \u0026 Sensitive Electronics","description":"\u003cstrong\u003eBougeRV 2000W Pure Sine Wave Inverter converts a 12V battery into clean 120V AC power, delivering up to 2000W continuous output for appliances and sensitive electronics.\u003c\/strong\u003e\n\n\u003cp\u003eThis inverter is built for mobile and off-grid life: a compact, plug-and-play unit that supplies steady pure sine wave electricity with low distortion, includes heavy-gauge battery cables, and supports remote monitoring. It balances high continuous power with safety layers and quiet cooling so you can run kitchen appliances, charge devices, or power entertainment gear in an RV, truck, or cabin.\u003c\/p\u003e\n\n\u003ch3\u003eHow much power can it run and which outlets are available?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV inverter provides a continuous 2000W output and a 4000W peak surge to start motors or compressors. It includes both a 15A and a dedicated 20A AC outlet; the 20A outlet is rated for the full 2000W load so heavy appliances can be used safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2000W continuous, 4000W peak surge for starting loads\u003c\/li\u003e\n  \u003cli\u003e15A and 20A outlets; 20A supports full continuous output\u003c\/li\u003e\n  \u003cli\u003ePre-attached 6 AWG battery cables for immediate installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill my laptops, phones and sensitive gear run safely?\u003c\/h3\u003e\n\u003cp\u003eThis inverter outputs a pure sine wave with low total harmonic distortion (THD ≤5%) and conversion efficiency above 90%, which helps protect sensitive electronics and prevent interference with audio\/video gear. It’s suitable for charging computers, smartphones, and precision equipment that require stable AC power.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePure sine wave output ideal for sensitive electronics\u003c\/li\u003e\n  \u003cli\u003eTHD ≤5% helps reduce noise and overheating risks\u003c\/li\u003e\n  \u003cli\u003e\u0026gt;90% conversion efficiency conserves battery energy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I monitor and control the inverter from afar?\u003c\/h3\u003e\n\u003cp\u003eBougeRV gives two remote monitoring options: a wired remote with nearly 20 feet of reach and a wireless app that operates up to about 32.8 feet. These controls let you check status and adjust settings without accessing the inverter directly, useful for hidden installs or rooftop solar systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e19.68 ft wired remote for direct, reliable control\u003c\/li\u003e\n  \u003cli\u003e32.8 ft smart app control for wireless monitoring\u003c\/li\u003e\n  \u003cli\u003eRemote access simplifies installations in vans, RVs, and cabinets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and cooling features protect the system?\u003c\/h3\u003e\n\u003cp\u003eThe unit integrates multi-layer safety protections against overload, short circuit, and other electrical faults, along with dual intelligent fans that engage as temperatures rise or when output goes beyond 800W. Cooling is designed to stay below 65 dB in normal operation, keeping noise low for comfortable living spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix-layer protection for overload, short circuit, and reverse polarity\u003c\/li\u003e\n  \u003cli\u003eDual smart fans activate at 113°F or high output to prevent overheating\u003c\/li\u003e\n  \u003cli\u003eNoise kept under 65 dB for quiet operation in living areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BougeRV 2000W Pure Sine Wave Inverter is aimed at RV travelers, vanlifers, weekend campers, and off-grid homeowners who need reliable AC power from a 12V battery bank. It suits users who want clean power for electronics, enough continuous wattage to run common appliances, and flexible monitoring options. Note: this product is an inverter only and does not include a battery charger function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this inverter charge batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This model is an inverter only; it converts 12V DC to 120V AC and does not include a battery charging function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it run a microwave or refrigerator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can run many microwaves and refrigerators if their starting surge stays within the 4000W peak and continuous draw is under 2000W; verify appliance wattage first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54209170866360,"sku":"B0GJCDTPP7","price":463.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-inverter-front-panel.jpg?v=1790668168"},{"product_id":"bougerv-100w-portable-solar-panel-foldable-n-type-fiberglass-reinforced-ip65-weather-resistant","title":"BougeRV 100W Portable Solar Panel Foldable N-Type, Fiberglass Reinforced — IP65 Weather-Resistant","description":"\u003cp\u003e\u003cstrong\u003eBougeRV 100W Portable Solar Panel is a foldable N-Type solar charger with fiberglass reinforcement, delivering higher conversion efficiency in a compact, weather-resistant pack for camping, RV, and off-grid power needs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTake reliable solar power on the road without hauling bulky equipment. This 100W foldable panel uses advanced N-Type cells to convert more sunlight into electricity while a fiberglass layer gives added toughness against knocks and abrasion. It comes ready to use with common plugs, a long extension cable for flexible placement, and side handles so you can set up quickly at camp or park it beside your rig.\u003c\/p\u003e\n\n\u003ch3\u003eHow much power can I expect from this 100W panel in real use?\u003c\/h3\u003e\n\u003cp\u003eRated at 100 watts maximum output, the panel’s N-Type cells increase conversion efficiency so you often get more usable power from the same footprint compared with older panels. Actual production varies with sun angle, weather, and setup, but the higher-efficiency cells and foldable design make it effective for charging batteries and running small devices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eN-Type cells: better performance in real-world light conditions\u003c\/li\u003e\n  \u003cli\u003e100W peak output for battery charging and small appliances\u003c\/li\u003e\n  \u003cli\u003ePerformance depends on sunlight, tilt, and shading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectors and accessories come with the solar charger?\u003c\/h3\u003e\n\u003cp\u003eThe panel arrives plug-and-play compatible with popular connector standards so you can link it to power stations, portable fridges, and many battery systems without adapters. It also includes a long extension cable so you can place the panel in optimal sun while keeping your equipment in shade or inside your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded connectors: XT60, DC7909, DC5521 for broad device compatibility\u003c\/li\u003e\n  \u003cli\u003e8.2 ft extension cable for flexible placement and easier setup\u003c\/li\u003e\n  \u003cli\u003eFoldable form factor and handles for quick hand-carry transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this panel durable enough for camping and RV life?\u003c\/h3\u003e\n\u003cp\u003eYes. The BougeRV panel pairs a fiberglass-reinforced backing with an IP65 rating to resist dust and water spray. That combination increases resistance to cracking and surface wear so the panel tolerates repeated handling, outdoor setup, and the bumps of travel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFiberglass layer reduces risk of cracking and abrasion\u003c\/li\u003e\n  \u003cli\u003eIP65 water and dust resistance for outdoor exposure\u003c\/li\u003e\n  \u003cli\u003eBuilt to fold and unfold repeatedly for mobile use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and user-friendly is the design for trips?\u003c\/h3\u003e\n\u003cp\u003eThe foldable layout makes storage and carrying simple: it compacts down, features built-in side handles, and is light enough for one-person handling. Set up is straightforward—unfold, point toward sun, and connect the compatible plug to your battery or station.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFolds into a compact packet for easy storage and transport\u003c\/li\u003e\n  \u003cli\u003eSide handles for comfortable carrying between sites\u003c\/li\u003e\n  \u003cli\u003eQuick setup: unfold, position, and plug in via included connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BougeRV 100W Foldable Solar Panel suits RV owners, campers, vanlifers, and weekend adventurers who need a compact, more efficient solar option for topping up batteries, powering small appliances, or maintaining devices off-grid. It also fits users seeking a rugged, weather-tolerant charger with easy connectors for common portable power stations and BougeRV refrigeration systems. If you want a portable panel that balances higher conversion, durable construction, and straightforward plug-and-play use, this unit is built for mobile outdoor life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I connect this panel directly to a portable power station?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes XT60, DC7909, and DC5521 connectors that work with many power stations and BougeRV batteries.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the panel weatherproof for camping in light rain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The panel has an IP65 rating, offering protection against dust and water spray, suitable for light rain and outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54209291157688,"sku":"B0G64B4W6W","price":290.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-100w-front-view.jpg?v=1790668639"},{"product_id":"bougerv-solar-panel-mounting-kit-for-cross-bars-no-drill-crab-clamp-vibration-tested","title":"BougeRV Solar Panel Mounting Kit for Cross Bars — No-Drill Crab Clamp, Vibration-Tested","description":"\u003cp\u003e\u003cstrong\u003eBougeRV's Crab Mounting Kit secures a solar panel to most cross bars without drilling, delivering a removable, vibration-tested roof-rack attachment for cars, trucks, trailers, and RVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWant to add solar power to your vehicle without modifying the roof? This BougeRV kit uses a patented \"crab\" clamp system that fastens to aero, oval, and square cross bars so you can run a solar panel for fridges, generators, and battery charging. It includes the tools for installation and has been tested to stay put under road vibration and wind loads.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit attach a solar panel without drilling?\u003c\/h3\u003e\n\u003cp\u003eThe Crab Mounting Kit grips cross bars using formed aluminum clamps and rubber contact pads that boost friction and protect bar finishes. Installation uses supplied hardware and tools so you can tighten or remove clamps without penetrating the roof or panel frame.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClamps fit most aero, oval, and square cross bars (not rounded bars)\u003c\/li\u003e\n  \u003cli\u003eRubber pads prevent slipping and protect cross bar surfaces\u003c\/li\u003e\n  \u003cli\u003eTools included for hand-tightening and secure fit\u003c\/li\u003e\n  \u003cli\u003eRemovable for transfer, cleaning, or seasonal use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the mounting kit hold up during driving and rough roads?\u003c\/h3\u003e\n\u003cp\u003eThe design was validated with extended vibration testing and engineered to eliminate movement and wind noise while driving. Its crab-shaped profile spreads clamping force evenly across the panel frame and cross bar, minimizing stress points and maintaining stability at highway speeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested at 240 vibrations per minute for 16 hours\u003c\/li\u003e\n  \u003cli\u003eEven clamp distribution reduces panel flex and rattling\u003c\/li\u003e\n  \u003cli\u003eDurable aluminum hardware resists corrosion and fatigue\u003c\/li\u003e\n  \u003cli\u003eRubber interface dampens vibration and prevents scratching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle types and panel sizes are compatible with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe BougeRV mounts work with cars, trucks, SUVs, trailers, and RVs that have compatible cross bars, and can also clamp to Unistrut or pipe for a ground-based setup. Check your cross bar dimensions and your panel frame width against the kit's limits before purchasing to ensure a proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for aero, oval, and square cross bars only; not for rounded bars\u003c\/li\u003e\n  \u003cli\u003eSupports common panel frame widths—verify with the included dimension guidelines\u003c\/li\u003e\n  \u003cli\u003eAdaptable for ground mounting with Unistrut or pipe clamps\u003c\/li\u003e\n  \u003cli\u003eSuitable for temporary or semi-permanent installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation, removal, and reconfiguration?\u003c\/h3\u003e\n\u003cp\u003eSetup and teardown take only a few simple steps using the hardware and tools in the box, so you can move the panel between vehicles or remove it for storage without special equipment. The kit is suitable for owners who want power on demand without committing to permanent roof modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete set of mounting hardware and tools included\u003c\/li\u003e\n  \u003cli\u003eNo drilling or permanent roof alterations required\u003c\/li\u003e\n  \u003cli\u003eQuick to remove for panel cleaning or seasonal storage\u003c\/li\u003e\n  \u003cli\u003eWorks for temporary installs at campsites or long trips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BougeRV Solar Panel Crab Mounting Kit is ideal for vanlifers, RV owners, overlanders, and anyone who needs a reliable, non-invasive way to attach a solar panel to existing roof cross bars. If you need a stable, tested mounting solution that avoids drilling and lets you transfer panels between vehicles or set them on compatible ground frames, this kit offers a practical balance of strength, protection, and portability. Note: confirm your cross bar shape and dimensions before ordering, as rounded cross bars are not supported.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit fit rounded cross bars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the BougeRV crab mount is not compatible with rounded cross bars; it fits aero, oval, and square profiles only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is drilling into the roof required to install the mount?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is necessary—the kit clamps to cross bars and includes all tools for installation and removal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BougeRV","offers":[{"title":"Default Title","offer_id":54209301741752,"sku":"B0C6WXSRDN","price":242.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/bougerv-crab-mount-front-view.jpg?v=1790668700"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/bougerv-crab-mount-front-view.jpg?v=1790679958","url":"https:\/\/canadianlawn.ca\/collections\/bougerv.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}