{"title":"Anbte","description":"\u003cp\u003eBrowse 20 Anbte products at Canadian Lawn, including solar controllers, inverters \u0026amp; accessories and outdoor tables. Replacement parts list the models and part numbers they fit — check yours on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping to every province and territory, priced in Canadian dollars, with 30 days to change your mind.\u003c\/p\u003e","products":[{"product_id":"anbte-solar-panel-end-clamps-for-unistrut-4pc-black-fits-30mm-35mm-frames-aluminum-with-304-stainless-hardware","title":"Anbte Solar Panel End Clamps for Unistrut – 4pc Black, Fits 30mm\/35mm Frames, Aluminum with 304 Stainless Hardware","description":"\u003cb\u003eAnbte 4pcs Solar Panel End Clamp is a dual-thickness aluminum end-clamp kit engineered to secure 30mm or 35mm PV modules to standard Unistrut rails.\u003c\/b\u003e\n\n\u003cp\u003eThese anodized black end clamps from Anbte pair lightweight aluminum alloy bodies with 304 stainless steel fasteners to provide a corrosion-resistant mounting option for residential, RV, or marine solar setups. The two-hole, bi‑directional design lets you flip between a 30 mm and 35 mm grip without changing parts, while pre-drilled holes, groove nuts and included screws simplify attachment to Unistrut channels. This product listing covers a set of four clamps with the installation hardware required for a small array or module replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these end clamps adapt to different panel thicknesses?\u003c\/h3\u003e\n\u003cp\u003eThe Anbte clamps are engineered with an asymmetric two-hole layout: one short side for 30 mm panels and one long side for 35 mm panels. You select the orientation that matches the module frame thickness before tightening, so the same clamp covers both common frame depths without extra adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-hole design supports 30 mm (1.18\") and 35 mm (1.38\") frames\u003c\/li\u003e\n  \u003cli\u003eFlip orientation rather than swapping parts for fast adjustments\u003c\/li\u003e\n  \u003cli\u003eConsistent clamping pressure across both thicknesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and corrosion protections are used?\u003c\/h3\u003e\n\u003cp\u003eThe main clamp bodies are cast from aluminum alloy for a balance of low weight and load capacity, while the supplied screws and hardware are 304 stainless steel to resist rust in outdoor environments. A black finish provides additional surface protection and a discreet look on dark rails or panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy bodies for light weight and strength\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel screws and fasteners for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eBlack anodized or coated finish for extra durability and aesthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation on standard Unistrut rails?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: the clamp set includes groove nuts and screws sized for Unistrut, and the clamps arrive pre-drilled so you can position and thread hardware quickly. The kit is designed for use with standard Unistrut profiles and common rooftop mounting workflows, reducing the need for custom fabrication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes groove nuts and mounting screws for Unistrut compatibility\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes speed alignment and fastening\u003c\/li\u003e\n  \u003cli\u003eSuits flat and pitched roofs as well as RV or marine rails when paired with Unistrut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich mounting situations are these clamps suitable for?\u003c\/h3\u003e\n\u003cp\u003eThese clamps cover a broad range of small- to medium-scale installations including residential rooftop arrays, RV rooftop systems, and marine panels on appropriate rail setups. They work with many roof coverings and seam types when combined with the correct Unistrut layout and sealing practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with tile, asphalt shingle, ceramic, slab shingle and standing seam roofs when used with Unistrut\u003c\/li\u003e\n  \u003cli\u003eAppropriate for home, RV and marine solar installations\u003c\/li\u003e\n  \u003cli\u003eFour-clamp kit designed for module end support or replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: installers, DIY solar enthusiasts and maintenance technicians who need a compact, adaptable end-clamp solution for standard Unistrut systems will find this Anbte kit useful. It’s best suited to projects that use 30 mm or 35 mm framed modules and require corrosion-resistant hardware for outdoor exposure. For larger commercial arrays or specialty rail systems, confirm compatibility with your racking plans and local code before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit both 30mm and 35mm panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The clamps have a two-hole design—use the shorter side for 30mm and the longer side for 35mm frame thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included screws rust-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit uses 304 stainless steel screws, chosen for their rust resistance in outdoor environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54193002873016,"sku":"B0G1XQDYGN","price":42.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-end-clamp-front-view.jpg?v=1790556713"},{"product_id":"anbte-solar-panel-end-clamps-adjustable-30-50-mm-10-pack-aluminum-with-304-stainless-fasteners","title":"Anbte Solar Panel End Clamps – Adjustable 30–50 mm, 10‑Pack Aluminum with 304 Stainless Fasteners","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 10-piece adjustable solar panel end clamps are a corrosion-resistant aluminum mounting kit that secures modules 30–50 mm thick for rooftop, RV, and marine solar installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for DIYers and professional installers alike, this complete Anbte kit provides ten adjustable end clamps plus stainless-steel fasteners and a wrench so you can mount multiple panels quickly and reliably. The clamps accept modules from 1.18 to 1.96 inches (30–50 mm) thick and feature pre-drilled holes for straightforward alignment with rails or brackets. Built from lightweight aluminum alloy with 304 stainless steel screws, the parts resist rust and handle outdoor exposure on flat or pitched surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adjustable end clamps fit different solar panel thicknesses?\u003c\/h3\u003e\n\n\u003cp\u003eEach clamp includes an innovative spacing adjustment that lets you change the clamping gap to accommodate a range of module frame depths. That flexibility removes the need to stock multiple clamp sizes and speeds up installation across mixed-panel arrays. The design securely grips the panel frame without deforming it when properly tightened.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits module thicknesses from 30 mm to 50 mm (1.18–1.96 inches)\u003c\/li\u003e\n  \u003cli\u003eAdjustable spacing mechanism for on-site adaptation\u003c\/li\u003e\n  \u003cli\u003eIncludes M8 bolts and nuts for firm attachment\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes simplify alignment to mounting rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials are used and why does that matter outdoors?\u003c\/h3\u003e\n\n\u003cp\u003eAnbte clamps use an aluminum alloy body combined with 304 stainless-steel screws and nuts to balance strength, weight, and corrosion resistance. Aluminum keeps the kit light for handling and reduces load on roof structures, while 304 stainless resists rust where moisture, salt spray, or freeze–thaw cycles occur. Together they extend service life in exposed installations without frequent replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy frame: light, high load capacity, corrosion-resistant\u003c\/li\u003e\n  \u003cli\u003e304 stainless-steel fasteners: rust-resistant and durable\u003c\/li\u003e\n  \u003cli\u003eSuitable for coastal or variable climates with reduced corrosion risk\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand typical outdoor weathering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what hardware is included?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit arrives ready to mount: ten adjustable end clamps, ten M8 bolts, ten nuts, and a wrench. Pre-drilled mounting holes let you quickly choose the correct slot and fasten the clamp to rails or brackets. This minimizes on-site drilling and reduces labor time for both single-panel and multi-panel arrays.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComplete kit: 10 clamps, 10 M8 bolts, 10 nuts, 1 wrench\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes for easy rail alignment\u003c\/li\u003e\n  \u003cli\u003eFits a wide variety of rails and rail-mounted systems (verify compatibility)\u003c\/li\u003e\n  \u003cli\u003eInstallation saves time with minimal tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can these clamps be used safely and what should I check first?\u003c\/h3\u003e\n\n\u003cp\u003eThese Anbte clamps are designed for residential rooftops, RV tops, boats, and many commercial racking layouts. They work on flat and pitched roofs constructed of tiles, asphalt shingles, ceramic tiles, slab shingles, and standing seam metal panels — though you should always confirm roof surface compatibility and structural load limits. Note: the nut supplied does not fit standard Unistrut channels, so measure before purchase if using Unistrut systems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for home, RV, and marine installations\u003c\/li\u003e\n  \u003cli\u003eCompatible with many roof coverings and standing seam boards\u003c\/li\u003e\n  \u003cli\u003eVerify Unistrut compatibility separately (nut not compatible)\u003c\/li\u003e\n  \u003cli\u003eContact 24-hour Anbte support for fitment or installation questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, solar hobbyists, and homeowners who need a reliable, corrosion-resistant set of clamps to secure panels 30–50 mm thick. Choose this Anbte 10-pack if you want a ready-to-use kit with adjustable spacing, stainless-steel hardware, and parts suited for rooftop, RV, and marine environments. If you use Unistrut or require specialized rail adapters, review compatibility prior to ordering or reach out to Anbte support for guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What panel thicknesses do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accommodate solar modules 30–50 mm (1.18–1.96 inches) thick using the adjustable spacing feature.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the fasteners rustproof for coastal use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit uses 304 stainless-steel screws and nuts which resist rust in most coastal and outdoor conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54199577444536,"sku":"B0C2Z5W6M7","price":66.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-clamp-kit.jpg?v=1790596541"},{"product_id":"anbte-solar-mid-clamps-for-unistrut-10pcs-30-35mm-aluminium-mounting-kit-black","title":"Anbte Solar Mid Clamps for Unistrut 10pcs — 30\/35mm Aluminium Mounting Kit, Black","description":"\u003cp\u003e\u003cstrong\u003eAnbte 10-piece solar mid-clamp kit secures adjacent 30mm\/35mm panels on Unistrut and metal roofs with corrosion-resistant aluminium hardware for long-lasting rooftop arrays.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis mounting set is built for homeowners, installers and DIYers who need a straightforward way to fasten framed solar modules to channel rails and common metal roof types. The kit contains ten centre clamps, matching M8 mounting screws and channel squeeze nuts so you can join panels quickly without custom fabrication. Finished in black, the clamps suit residential and light-commercial arrays on tin, sheet, standing seam and flat roofs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this mid-clamp fit onto Unistrut and channel rails?\u003c\/h3\u003e\n\u003cp\u003eThe clamps are shaped to sit between two framed solar modules and grip the module frame while anchoring into Unistrut or similar channels via the supplied squeeze nuts and M8 bolts. Pre-drilled holes speed alignment and the nut plates slide into the channel to create a secure connection without welding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with standard Unistrut channels and rail systems\u003c\/li\u003e\n  \u003cli\u003eIncludes channel squeeze nuts for tool-free placement inside rails\u003c\/li\u003e\n  \u003cli\u003eM8*59mm bolts supply enough thread length for most rail thicknesses\u003c\/li\u003e\n  \u003cli\u003ePre-drilled clamp holes for fast, repeatable positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps work with 30mm and 35mm framed solar panels?\u003c\/h3\u003e\n\u003cp\u003eYes — the clamp profile accommodates both 30mm and 35mm frame thicknesses so you can use the same part across mixed-panel arrays. The design compresses evenly across the module frame, providing reliable hold without deforming the extrusion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for 30mm and 35mm framed module edges\u003c\/li\u003e\n  \u003cli\u003eEven clamping force to protect panel frames and rails\u003c\/li\u003e\n  \u003cli\u003eTen clamps included to secure multiple adjacent panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these clamps durable outdoors and suitable for coastal or exposed sites?\u003c\/h3\u003e\n\u003cp\u003eConstructed from aluminium alloy with a weather-resistant finish, the clamps resist rust and corrosion better than standard steel hardware. They are intended for rooftop exposure and able to withstand normal wind and precipitation loads when installed per best-practice mounting guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminium alloy resists corrosion and preserves appearance\u003c\/li\u003e\n  \u003cli\u003eBlack finish reduces visual contrast on dark roofs\u003c\/li\u003e\n  \u003cli\u003eDesigned to handle typical rooftop environmental stressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what installation tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains ten mid clamps, matching M8*59mm bolts and channel squeeze nuts so you have the core hardware to join panels on a rail. Basic hand tools — a socket or spanner set and a torque wrench — are recommended to tighten bolts to manufacturer torque specs and ensure consistent clamping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 x Anbte mid clamps (black aluminium)\u003c\/li\u003e\n  \u003cli\u003e10 x M8*59mm mounting bolts and matching channel nuts\u003c\/li\u003e\n  \u003cli\u003eRequires standard wrench\/sockets and torque wrench for final tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, solar-savvy homeowners and RV or marine owners who need a compact, reliable mid-clamp to join framed solar modules on Unistrut or metal roofs. It’s ideal for retrofit projects and new rooftop arrays where consistent panel spacing, corrosion resistance and a low-profile black finish are priorities. If you require bespoke spacing or ballast-mounted systems, consult a racking specialist to confirm fit before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mid clamps fit both 30mm and 35mm panel frames?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The clamp profile is designed to accommodate 30mm and 35mm framed solar modules without modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are channel nuts and bolts included for Unistrut installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes M8*59mm bolts and channel squeeze nuts to secure the clamps into Unistrut channels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54199691313336,"sku":"B0F18659S3","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-clamp-packaging.jpg?v=1790598027"},{"product_id":"anbte-solar-panel-clamps-kit-for-unistrut-30-35-mm-10pcs-aluminum-alloy-with-304-stainless-screws","title":"Anbte Solar Panel Clamps Kit for Unistrut 30\/35 mm — 10PCS Aluminum Alloy with 304 Stainless Screws","description":"\u003cp\u003e\u003cstrong\u003eAnbte 10PCS Solar Panel Clamps for Standard Unistrut (30 mm\/35 mm) is a complete aluminum alloy mounting kit that secures and spaces PV modules using 4 end clamps, 6 T-shaped middle clamps and stainless hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies everything needed to attach up to four panels to Unistrut rails: lightweight, corrosion-resistant aluminum clamps paired with 304 stainless steel screws and a small wrench. Designed for residential, RV and marine solar installs, the clamps are pre-drilled for quick alignment and reduce stress on roof coverings while resisting weather and salt air corrosion.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps fit standard Unistrut rails?\u003c\/h3\u003e\n\u003cp\u003eThe clamp profile is sized to sit and lock securely on 30 mm and 35 mm Unistrut channels. End clamps grip the panel edge while the T-shaped middle clamps join adjacent modules and centralize clamping pressure across the rail.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 30 mm and 35 mm Unistrut channel widths\u003c\/li\u003e\n  \u003cli\u003eEnd clamps for panel edges and T-middle clamps for adjacent modules\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes for fast alignment on the rail\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe clamps are manufactured from an aluminum alloy for strength at low weight, helping installers manage lift and torque during placement. All mounting screws are 304 stainless steel, chosen for rust resistance and dimensional stability in outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy clamp bodies: lightweight and corrosion-resistant\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel screws: anti-corrosion and durable\u003c\/li\u003e\n  \u003cli\u003eWrench supplied: reduces need for separate tools on-site\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation for a typical homeowner or RV owner?\u003c\/h3\u003e\n\u003cp\u003eClamps arrive with pre-drilled holes and clear separation between end and middle parts to speed layout and reduce on-site measuring. With the included screws and wrench, one installer can complete a small array in a few hours depending on roof complexity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-drilled mounting holes for fast alignment\u003c\/li\u003e\n  \u003cli\u003eClear end vs. middle clamp roles to avoid assembly errors\u003c\/li\u003e\n  \u003cli\u003eIncludes fixing screws and a wrench to start work immediately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps hold up in harsh weather and on different roof surfaces?\u003c\/h3\u003e\n\u003cp\u003eCombining aluminum alloy and 304 stainless steel gives the kit good resistance to salt spray, rain, and UV exposure typical of long-term outdoor use. The design also reduces point-loading on roof coverings, which helps protect tiles, shingles or standing seam seams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable materials suited for coastal, residential and mobile use\u003c\/li\u003e\n  \u003cli\u003eClamping design minimizes concentrated stress on roof materials\u003c\/li\u003e\n  \u003cli\u003eWorks with tile, asphalt shingle, ceramic tile, panel shingles and standing seam roofs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, DIY homeowners, RV owners and small-scale marine system fitters who need a compact, complete clamp set for mounting up to four solar panels on Unistrut rails. This kit is ideal if you want corrosion-resistant hardware, quick installation with minimal tools, and a design that protects roof coverings while providing a secure, long-lasting mechanical connection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many panels can this 10PCS kit mount?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically enough hardware to secure up to four standard PV panels when used with Unistrut rails.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the mounting screws rust-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes 304 stainless steel screws designed to resist rust and corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54199692427448,"sku":"B0FCMHF9X9","price":69.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-clamps-packaging.jpg?v=1790598050"},{"product_id":"anbte-solar-panel-z-bracket-mounting-kit-16pcs-black-for-50-150w-panels-aluminum-304-stainless-hardware","title":"Anbte Solar Panel Z Bracket Mounting Kit — 16PCS Black for 50–150W Panels, Aluminum + 304 Stainless Hardware","description":"\u003cp\u003e\u003cstrong\u003eAnbte 16PCS Solar Panel Z Bracket kit is a complete aluminum mounting set designed to fasten 50–150W solar panels to RVs, roofs, boats, and yachts with corrosion-resistant hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re outfitting a camper, retrofitting a roof array, or topping a boat with a compact solar panel, the Anbte Z bracket kit provides corrosion-resistant parts and vibration-resistant mounting points so panels stay aligned and secure. This kit bundles everything most installers need into one lightweight package: 16 black Z brackets, 304 stainless fasteners, nuts, and washers. The components are optimized for mobile applications where weight, salt spray, and movement matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable are these Z brackets in coastal or humid environments?\u003c\/h3\u003e\n\n\u003cp\u003eThe Anbte brackets combine aluminum alloy bodies with 304 stainless steel screws to resist rust and corrosion in salty or high-humidity settings. UV exposure is also considered in the finish, reducing surface degradation over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy bracket body with corrosion-resistant coating for extended outdoor life\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel screws, nuts, and washers to prevent rust in marine conditions\u003c\/li\u003e\n  \u003cli\u003eBlack finish designed to resist UV fading and blend with common panel frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit keep panels steady on an RV or boat that moves a lot?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the design includes two bottom mounting holes per bracket to minimize panel rotation and movement caused by wind or vehicle motion. That dual-point mounting improves alignment stability and reduces stress on individual fasteners.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo bottom mounting holes prevent tilting and reduce vibration-induced loosening\u003c\/li\u003e\n  \u003cli\u003eRecommended for 50W–150W panels commonly used on mobile setups\u003c\/li\u003e\n  \u003cli\u003eLightweight construction reduces added weight while maintaining secure hold\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware comes in the kit and is anything else required?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is sold as an all-in-one hardware pack with 16 Z brackets plus matching screws, nuts, and washers so most installations need no additional parts. Depending on your mounting surface—wood, aluminum, or fiberglass—you may need sealant or specific fasteners for the substrate, but panel-to-bracket hardware is included.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e16 Z brackets (black) sized for typical small to medium panels\u003c\/li\u003e\n  \u003cli\u003e304 stainless screws, nuts, and washers matched to the brackets\u003c\/li\u003e\n  \u003cli\u003eSuitable for DIY installs or professional fitters; additional surface anchors or sealants may be required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIYer mounting panels on a roof or RV?\u003c\/h3\u003e\n\n\u003cp\u003eThe straightforward Z bracket shape and included fasteners make this kit accessible to most DIYers with basic tools. Because all mounting hardware for the brackets is supplied, you can focus on panel placement, wiring, and roof preparation rather than sourcing multiple part types.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple right-angle bracket design for quick alignment and fastening\u003c\/li\u003e\n  \u003cli\u003eAll-in-one kit reduces trips to the hardware store and speeds up installs\u003c\/li\u003e\n  \u003cli\u003eLightweight brackets make handling easier on ladders or boat decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Anbte 16PCS Solar Panel Z Bracket kit is aimed at RV owners, boaters, yacht fitters, and homeowners installing compact solar panels (50–150W) who want corrosion-resistant, vibration-reducing mounting hardware. It’s suitable for DIY enthusiasts and professionals seeking a ready-made bracket set that balances durability, low weight, and broad compatibility across mobile and rooftop solar projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these brackets be used on any solar panel frame?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most 50–150W panels with standard frames, but check your panel hole spacing and thickness before mounting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included screws suitable for marine environments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit uses 304 stainless steel fasteners, which resist rust in coastal and humid settings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54199721099448,"sku":"B0F9W6G98W","price":74.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-packaging-z-bracket-kit.jpg?v=1790598622"},{"product_id":"anbte-adjustable-solar-panel-end-clamps-for-unistrut-10pcs-30-50mm-aluminum-with-304-stainless-hardware","title":"Anbte Adjustable Solar Panel End Clamps for Unistrut — 10pcs, 30–50mm Aluminum with 304 Stainless Hardware","description":"\u003cp\u003e\u003cstrong\u003eAnbte 10pcs Adjustable Solar Panel End Clamps are aluminum alloy end clamps designed to secure 30–50 mm (1.18–1.98\") solar panels to standard Unistrut channels, supplied as a complete 10-piece mounting kit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese adjustable end clamps provide a durable, corrosion-resistant way to fasten framed solar modules to Unistrut rails for roof, RV, or marine arrays. Constructed from lightweight aluminum alloy with 304 stainless steel fasteners, the kit supports a range of panel thicknesses and includes the hardware needed for installation. The design focuses on versatility, weather resistance, and straightforward fitting into common Unistrut profiles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps adapt to different solar panel thicknesses?\u003c\/h3\u003e\n\n\u003cp\u003eThe clamps feature a slotted, adjustable face that covers panels from 30 to 50 mm (1.18 to 1.98 inches) thick. You set the clamp spacing to match your panel frame thickness, then secure the clamp to the Unistrut channel with the supplied nuts and bolts. This reduces the need for multiple clamp sizes and simplifies inventory for installers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdjustable range: fits 30–50 mm framed panels.\u003c\/li\u003e\n  \u003cli\u003eSlotted body allows precise clamp spacing adjustment.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard Unistrut rail geometries.\u003c\/li\u003e\n  \u003cli\u003eEliminates need for different-size end clamps on site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and corrosion protections are used?\u003c\/h3\u003e\n\n\u003cp\u003eEach clamp is cast or extruded from aluminum alloy for a balance of light weight and tensile strength, while all exposed fasteners are 304 stainless steel to resist rust in outdoor environments. This combination helps prevent galvanic corrosion when installed correctly and keeps the mounting points durable across seasons. The build is suitable for rooftop, marine, and RV exposure where salt spray or humidity might accelerate wear.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy clamp bodies for strength and light weight.\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel screws and nuts for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor, marine, and rooftop conditions.\u003c\/li\u003e\n  \u003cli\u003eFinishes chosen to minimize long-term degradation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit arrives with 10 adjustable end clamps and the necessary nuts and screws for mounting to Unistrut channels, and clamps are pre-drilled to speed alignment. Installers simply choose the Unistrut slot that matches panel height, slide the clamp into position, tighten the stainless fasteners, and repeat for each panel end. The pre-drilled holes and standard hardware reduce time on roof and require only common hand tools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10-piece clamp set with mounting screws and nuts included.\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes speed alignment and reduce drilling on site.\u003c\/li\u003e\n  \u003cli\u003eFits common hand tools — no specialty equipment required.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard Unistrut channel widths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich surfaces and installations are these clamps suitable for?\u003c\/h3\u003e\n\n\u003cp\u003eThese clamps are intended for framed solar panel installations on Unistrut support rails and work on a wide variety of roof materials and platforms. They are commonly used on residential and commercial flat or pitched roofs, RV mounts, and marine installations where Unistrut rails are fitted. While optimized for Unistrut systems, these clamps serve well wherever a reliable end-clamping solution is required and environmental exposure is a concern.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks with tile, asphalt shingle, ceramic, and standing seam roofs.\u003c\/li\u003e\n  \u003cli\u003eSuitable for residential, RV, and marine solar arrays.\u003c\/li\u003e\n  \u003cli\u003eIdeal where Unistrut rails are already the chosen support system.\u003c\/li\u003e\n  \u003cli\u003eHolds up in varied weather conditions with proper installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, electricians, and DIY solar enthusiasts who use Unistrut-based mounting systems and need a reliable, adjustable end-clamp solution for framed panels between 30 and 50 mm thick. The Anbte 10-pack suits small commercial jobs, rooftop residential arrays, RV and marine setups, or as a spare-parts kit for maintenance crews that value corrosion resistance, quick installation, and compatibility with standard Unistrut rails.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit different Unistrut sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are designed to slide into and fasten on standard Unistrut channels common to solar racking systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the clamps on unframed panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These clamps are intended for framed panels 30–50 mm thick; they are not recommended for unframed (frameless) modules.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54199806820536,"sku":"B0FBWB2J2C","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-end-clamp-front-view_6c421b37-30bb-4c1c-87ef-b5cc17b4ec30.jpg?v=1790600151"},{"product_id":"anbte-solar-panel-end-clamps-for-unistrut-10pcs-30-35mm-silver-aluminum-304-stainless-hardware","title":"Anbte Solar Panel End Clamps for Unistrut — 10pcs 30\/35mm Silver, Aluminum \u0026 304 Stainless Hardware","description":"\u003cb\u003eAnbte 10-piece end clamp kit secures 30mm or 35mm solar panels to standard Unistrut rails using corrosion-resistant aluminum clamps and 304 stainless-steel fasteners.\u003c\/b\u003e\n\n\u003cp\u003eWhether you are mounting panels on an RV, home roof, or marine deck, these Anbte end clamps offer a straightforward, adjustable solution for holding module edges firmly to Unistrut-style channels. The kit includes a mix of long and short clamp halves, pre-drilled holes, groove nuts and screws so you can adapt to panel thicknesses of 30 mm or 35 mm without custom machining.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps accommodate both 30mm and 35mm panel frames?\u003c\/h3\u003e\n\u003cp\u003eEach clamp is designed with two different face depths so you can choose the shorter side for 30 mm frames and the longer side for 35 mm frames. The pre-drilled holes let you attach the clamps in the correct orientation quickly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-depth clamp bodies fit 30 mm (1.18\") and 35 mm (1.38\") aluminum frames\u003c\/li\u003e\n\u003cli\u003ePre-drilled mounting holes eliminate on-site drilling\u003c\/li\u003e\n\u003cli\u003eLong and short ends labeled for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and weatherproof are the components for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe clamps are machined from aluminum alloy for a high strength-to-weight ratio and natural corrosion resistance, while the included screws are 304 stainless steel for rust protection. That combination resists salt spray, rain and sun exposure common in rooftop, RV, and marine environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum alloy bodies for light weight and high load capacity\u003c\/li\u003e\n\u003cli\u003e304 stainless-steel screws and hardware for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eConstruction suitable for harsh weather and long-term outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include and how many panels can it support?\u003c\/h3\u003e\n\u003cp\u003eThe set contains ten end clamps plus groove nuts and mounting screws sized for Unistrut-style channels, enough for several modules depending on panel layout. Typically used as edge clamps, you’ll pair these with middle clamps and rail hardware to mount full arrays.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 end clamps for standard installations\u003c\/li\u003e\n\u003cli\u003eGroove nuts and screws included for Unistrut attachment\u003c\/li\u003e\n\u003cli\u003eQuantity suitable for small to medium residential or mobile setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIYer or installer?\u003c\/h3\u003e\n\u003cp\u003eClamps arrive pre-drilled and ready to mate with groove nuts, so assembly is a simple alignment and tightening process. No special tools beyond common sockets and a torque wrench are required if you follow manufacturer torque guidance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-drilled holes speed placement and reduce on-site work\u003c\/li\u003e\n\u003cli\u003eCompatible with standard Unistrut channels and common PV hardware\u003c\/li\u003e\n\u003cli\u003eSimple orientation for 30mm or 35mm frames minimizes guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Anbte 10-piece end clamp kit is aimed at homeowners, RV owners, boat owners, and solar installers needing a reliable, corrosion-resistant edge-clamping solution for 30 mm or 35 mm framed solar panels on Unistrut rails. If you want a practical, lightweight set of end clamps with stainless hardware for outdoor installations where adaptability and longevity matter, this kit fits those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these clamps be used on standing seam roofs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re designed for Unistrut channels; use compatible standing seam adapters or rails rather than clamping directly to seams.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all fasteners stainless steel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the included screws are 304 stainless steel; clamp bodies are aluminum alloy for corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54199972167864,"sku":"B0G1XQSVJJ","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-end-clamps-kit.jpg?v=1790604232"},{"product_id":"anbte-solar-panel-roof-mounting-kit-7-87in-aluminium-rails-clamps-for-30-35mm-framed-panels-corrosion-resistant","title":"Anbte Solar Panel Roof Mounting Kit — 7.87in Aluminium Rails \u0026 Clamps for 30\/35mm Framed Panels, Corrosion-Resistant","description":"\u003cstrong\u003eAnbte's Solar Panel Roof Mounting Kit is a complete aluminium rail-and-clamp system designed for quick rooftop or RV solar panel installations.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit provides short, durable rails, Z-type brackets and adjustable end clamps to secure framed PV modules on a range of roof surfaces. Made from lightweight aluminium alloy with stainless steel fasteners and EPDM rubber pads, it balances ease of installation with weather resistance for home, RV or marine use. The pack contains everything needed for small arrays and is optimized for framed panels with either 30 mm or 35 mm frames.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit speed up rooftop solar installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses Z-type brackets and pre-drilled rails to simplify alignment and reduce installation steps. Rails are short and easy to handle, and the included wrench plus matching screws mean fewer trips to the toolbox. Designed to reduce load concentration on roof coverings, it helps installers mount panels faster with reliable attachment points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-cut 7.87\" aluminium rails for quick positioning\u003c\/li\u003e\n  \u003cli\u003eZ-type brackets that align panels with minimal adjustments\u003c\/li\u003e\n  \u003cli\u003eAll matching screws, washers and a wrench included\u003c\/li\u003e\n  \u003cli\u003ePre-drilled end clamps to skip measuring and drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich panel frames and roofs are compatible with this system?\u003c\/h3\u003e\n\u003cp\u003eThe end clamps are dual-sided to accept common framed panel thicknesses, and the materials resist corrosion in outdoor environments. This kit fits most framed PV modules with 30 mm (1.18\") or 35 mm (1.38\") frames and works on flat and pitched roofs covered with tile, asphalt shingle, ceramic, slab shingle or standing seam metal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-hole end clamp: short side for 30 mm frames, long side for 35 mm\u003c\/li\u003e\n  \u003cli\u003eSuitable for tiles, shingles, standing seam and flat RV roofs\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber mat to protect roofing and seal mount points\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials for coastal and inland use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included for durability?\u003c\/h3\u003e\n\u003cp\u003eComponents are built from aluminium alloy and stainless steel to limit weight while keeping high load capacity and corrosion resistance. An EPDM rubber pad protects roof coverings and improves water resistance where the Z-brackets contact the surface. The kit contains multiple fasteners so installers have the correct parts on hand for each rail.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminium alloy rails and clamps for strength and light weight\u003c\/li\u003e\n  \u003cli\u003e18 stainless-steel screws and 6 washers included\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber mat for waterproofing and roof protection\u003c\/li\u003e\n  \u003cli\u003eComes with wrench, nuts and M8 × 25 mm screws for assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the clamps adapt to different panel frame widths?\u003c\/h3\u003e\n\u003cp\u003eAnbte’s end clamp features two pre-drilled mounting holes and two different face depths so you can choose the correct side for your panel frame. That dual-sided design means the same clamp works for common frame profiles without needing extra spacers or different clamp models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlip the clamp to use the long or short side depending on frame width\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes speed up alignment and bolt placement\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 30 mm and 35 mm framed modules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Anbte mounting kit is aimed at DIY homeowners, mobile-living enthusiasts and small-scale installers who need a compact, corrosion-resistant rail-and-clamp solution for framed solar panels. It’s especially useful for retrofit projects on pitched roofs, RV roofs and small residential arrays where a straightforward, hardware-complete kit helps finish work quickly without sourcing extra parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these clamps fit both 30 mm and 35 mm panel frames?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The dual-sided end clamp has a short side for 30 mm frames and a long side for 35 mm frames.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the kit suitable for marine or coastal installations?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The aluminium alloy and stainless steel hardware provide good corrosion resistance for coastal use, with EPDM sealing for added protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54202372325560,"sku":"B0BZ3RD3TL","price":96.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-packaging-roof-mounting-kit.jpg?v=1790618089"},{"product_id":"anbte-solar-panel-end-clamps-20pcs-30-35mm-black-aluminum-alloy-with-304-stainless-hardware-for-unistrut","title":"Anbte Solar Panel End Clamps 20pcs 30\/35mm Black — Aluminum Alloy with 304 Stainless Hardware for Unistrut","description":"\u003cp\u003e\u003cstrong\u003eAnbte 20-piece solar panel end clamp kit secures standard Unistrut-mounted panels with adjustable 30mm\/35mm clamping options and corrosion-resistant hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese aluminum alloy end clamps from Anbte are a complete mounting accessory set designed to fasten solar modules to standard Unistrut rails on homes, RVs, and boats. The kit includes long and short end pieces, pre-drilled holes, groove nuts, and 304 stainless steel screws so you can install panels quickly while resisting outdoor corrosion. Built for common 30 mm and 35 mm panel thicknesses, the clamps offer a simple, repeatable connection point between each module and the support rail.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these clamps adapt to different panel thicknesses?\u003c\/h3\u003e\n\u003cp\u003eThe Anbte clamps feature an innovative two-hole end design with distinct long and short sides so one clamp fits two common module thicknesses. Choose the short side for 30 mm panels and flip to the long side for 35 mm panels—no cutting or extra adapters required. This reduces inventory needs and speeds up mounting on mixed-panel arrays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-sided clamp: short side for 30 mm, long side for 35 mm\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes align directly with groove nuts for fast assembly\u003c\/li\u003e\n  \u003cli\u003eWorks with standard Unistrut rails used across mounting systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and corrosion protection do these parts offer?\u003c\/h3\u003e\n\u003cp\u003eThe clamp bodies are made from lightweight aluminum alloy that handles loads while resisting rust and environmental wear. All included fasteners are 304 stainless steel, selected for superior corrosion resistance in coastal and humid environments. Together the materials deliver long-term durability for outdoor solar installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy clamp bodies for strength without excess weight\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel screws prevent rust and galling\u003c\/li\u003e\n  \u003cli\u003eSurface finishes suitable for exposure to sun, rain, and salt air\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eEach kit is ready-to-install with pre-drilled mounting holes, groove nuts sized for Unistrut, and the correct stainless steel screws. The clamps fasten directly to Unistrut rails and between module frames, making alignment and torque control straightforward. This lowers labor time and reduces the need for specialty tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet of 20 clamps plus groove nuts and mounting screws included\u003c\/li\u003e\n  \u003cli\u003ePre-drilled holes streamline alignment with Unistrut groove nuts\u003c\/li\u003e\n  \u003cli\u003eCompatible with common hand tools and standard torque settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich roof and mounting types are these clamps compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese end clamps are versatile for rooftop and non-rooftop uses, designed to pair with Unistrut-based systems on flat and pitched surfaces. They accommodate installations on asphalt shingles, tile, metal standing seam, concrete slab roofs, RV racks, and marine mounts when integrated into a Unistrut assembly. They perform well in areas that require strong mechanical clamping rather than adhesive or seal-only solutions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with pitched and flat roofs including asphalt, tile, and shingles\u003c\/li\u003e\n  \u003cli\u003eFits Unistrut rails common on residential, RV, and marine mounts\u003c\/li\u003e\n  \u003cli\u003eSuitable as end clamps for module-to-rail mechanical connections\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: installers, DIY solar enthusiasts, RV owners, and marine integrators who use standard Unistrut rails and need a reliable end-clamp solution for 30 mm or 35 mm thick solar panels. If you want a ready-made set with corrosion-resistant hardware to streamline repetitive installs or replacements, this Anbte 20-piece kit provides the components and flexibility required for consistent, long-term mounting performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit both 30mm and 35mm thick panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The two-hole dual-sided design lets you use the short side for 30mm and the long side for 35mm panels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included screws rust-resistant for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit uses 304 stainless steel screws to resist corrosion in outdoor and coastal environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54204598649016,"sku":"B0FBWMLH1H","price":113.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-end-clamp-front-view_21318a8d-8a79-4345-9b1b-a3cd2a3db874.jpg?v=1790633950"},{"product_id":"anbte-lightweight-folding-camping-table-23-x-16-3-adjustable-heights-waterproof-portable-with-carry-handle","title":"Anbte Lightweight Folding Camping Table 23\" x 16\" — 3 Adjustable Heights, Waterproof Portable with Carry Handle","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 2 ft Small Folding Table is a lightweight, waterproof portable table with three adjustable heights, a carry handle and an under-table storage net for easy outdoor and indoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact folding table measures 23\" x 16\" and balances low weight with sturdy construction, making it a versatile choice for camping, picnics, beach days, tailgates or extra indoor workspace. Built from a high-density plastic top and thickened aluminum alloy legs, the table resists moisture and wipes clean quickly. It collapses into a briefcase-size package with an integrated handle so you can set it up in under a minute without tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the adjustable height help in real situations?\u003c\/h3\u003e\n\u003cp\u003eThe table offers three fixed leg positions—10\", 18.1\" and 27.5\"—so you can use it low to the ground for lawn seating, mid-height for floor chairs or higher as a regular table next to chairs. Changing height is straightforward and locks securely for stable use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow height (10\") for picnics and kids' play\u003c\/li\u003e\n  \u003cli\u003eMid height (18.1\") for casual lounging or games\u003c\/li\u003e\n  \u003cli\u003eHigh height (27.5\") for dining beside chairs or work\u003c\/li\u003e\n  \u003cli\u003eSimple leg adjustment with side snaps that keep the top level\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this table durable and weather resistant?\u003c\/h3\u003e\n\u003cp\u003eThe tabletop is made of high-density plastic that repels water and wipes clean easily, while the frame uses upgraded thickened aluminum alloy for long-term reliability. Design details like U-shaped legs and secure side snaps add rigidity and reduce wobble on uneven ground.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof plastic top resists spills and rain\u003c\/li\u003e\n  \u003cli\u003eThickened aluminum legs for rust-resistant strength\u003c\/li\u003e\n  \u003cli\u003eU-shaped frame increases stability on outdoor surfaces\u003c\/li\u003e\n  \u003cli\u003eFast assembly locks the tabletop flat and secure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable is the Anbte folding table for travel?\u003c\/h3\u003e\n\u003cp\u003eWeighing about 4.92 lbs (2.25 kg), the table folds down to roughly 15.7\" x 12.2\" x 2.55\" and includes an integrated handle for easy carrying. The tool-free setup takes less than a minute, so you can move it from car to campsite, beach or room without hassle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact folded size fits most car trunks and RV storage\u003c\/li\u003e\n  \u003cli\u003eIntegrated handle for convenient transport\u003c\/li\u003e\n  \u003cli\u003eUnder-a-minute, tool-free assembly and teardown\u003c\/li\u003e\n  \u003cli\u003eLightweight design at under 5 lbs reduces shoulder strain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat extra features make it more useful than a basic folding table?\u003c\/h3\u003e\n\u003cp\u003eAnbte added a capacious mesh storage net under the tabletop to keep small items off the ground and within reach, turning the table into multifunctional gear. It serves as a picnic table, card or game surface, portable work station, serving table or fishing prep area depending on your needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnder-table mesh keeps snacks, utensils or phones organized\u003c\/li\u003e\n  \u003cli\u003eFlat, easy-to-clean surface for food or gear\u003c\/li\u003e\n  \u003cli\u003eSuitable for indoor and outdoor activities—dining, studying, crafts\u003c\/li\u003e\n  \u003cli\u003eCompact footprint that still supports everyday tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Anbte 2 ft Small Folding Table is aimed at people who need a lightweight, weather-resistant portable table with flexible height options. It suits campers, day-trippers, small-space dwellers, parents wanting a kids' activity surface, and anyone needing a quick, reliable extra table for outdoor or indoor use where compact storage and fast setup matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the folded dimensions and weight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Folds to about 15.7\" x 12.2\" x 2.55\" and weighs approximately 4.92 lbs (2.25 kg).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the tabletop be used in rain or wiped clean easily?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The high-density plastic top is waterproof and cleans quickly with a wipe or rinse.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54204622667960,"sku":"B0G6399RNP","price":125.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-table-open.jpg?v=1790634771"},{"product_id":"anbte-solar-panel-mounting-brackets-roof-kit-black-aluminum-rails-fits-4-framed-panels","title":"Anbte Solar Panel Mounting Brackets Roof Kit – Black Aluminum Rails, Fits 4 Framed Panels","description":"\u003cp\u003e\u003cstrong\u003eAnbte Solar Panel Mounting Brackets are a complete aluminum-rail kit designed to securely mount up to four framed solar panels on a variety of roofs with corrosion-resistant hardware and weatherproof rubber pads.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese black Anbte roof mounting brackets combine lightweight aluminum rails, stainless steel fasteners, EPDM rubber pads and versatile end and middle clamps to give a practical, weather-ready mounting solution for home, RV or marine solar arrays. The system’s grooved rail profile and two-hole end clamps allow a snug, adjustable fit for framed panels while helping spread loads across the roof surface for added protection.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these brackets make installation easier?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses matched end clamps, T-shaped middle clamps and pre-sized rails so panels can be secured quickly and accurately. Rails with grooves accept the clamps and hardware without complicated drilling, and the included screws and rubber pads simplify attachment to common roofing materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-drilled two-hole end clamps for quick alignment and choice of frame depth\u003c\/li\u003e\n  \u003cli\u003eGrooved aluminum rails that accept clamp bolts and resist slippage\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber mats to cushion panels and protect roof coverings\u003c\/li\u003e\n  \u003cli\u003eStainless steel fasteners included for straightforward assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich roofs and panels are these mounts compatible with?\u003c\/h3\u003e\n\u003cp\u003eAnbte’s kit is built for broad compatibility: it works on flat and pitched roofs and suits framed photovoltaic modules with 30 mm or 35 mm frame depths. The components tolerate tile, asphalt shingle, ceramic, slab shingles and standing seam installations when used with appropriate roof attachments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits framed panels with 30 mm (1.18\") or 35 mm (1.38\") frames using the two-sided end clamp\u003c\/li\u003e\n  \u003cli\u003eSuitable for tiles, asphalt shingles, ceramic tiles, slab shingles and standing seam boards\u003c\/li\u003e\n  \u003cli\u003eDurable materials for outdoor exposure and variable weather\u003c\/li\u003e\n  \u003cli\u003eWorks for home rooftops, RVs and small marine arrays with right mounting adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features protect the system outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe rails are extruded from aluminum alloy for a high strength-to-weight ratio and corrosion resistance. Stainless steel screws resist rust while EPDM rubber pads offer long-lasting waterproofing and cushioning to prevent roof wear and reduce stress from panel weight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy rails: lightweight, high load capacity, corrosion-resistant\u003c\/li\u003e\n  \u003cli\u003eStainless steel fasteners: rust-resistant for coastal and humid locations\u003c\/li\u003e\n  \u003cli\u003eEPDM rubber mats: waterproof, UV-stable cushioning for roof protection\u003c\/li\u003e\n  \u003cli\u003eGrooved rail design improves clamp grip and alignment stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how many panels can I mount?\u003c\/h3\u003e\n\u003cp\u003eThis Anbte package includes rails, end and middle clamps, screws and rubber pads sized for a small domestic array. The quantities match a typical four-panel setup, so you have the essential hardware to begin assembly right away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 rails (4.72 in length specification per rail), sized for a 4-panel layout\u003c\/li\u003e\n  \u003cli\u003e4 end clamps with two-hole design (long and short sides for 30\/35 mm frames)\u003c\/li\u003e\n  \u003cli\u003e6 T-shaped middle clamps for panel-to-panel securing\u003c\/li\u003e\n  \u003cli\u003eComplete fixing screws and EPDM rubber pads included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Installers, DIY homeowners, and small RV or boat owners seeking a ready-made mounting kit for up to four framed solar panels will find Anbte’s aluminum rails and clamp system practical and reliable. Choose this kit if you want corrosion-resistant components, easy clamp adjustments for different frame depths, and included sealing pads and stainless hardware to reduce roof impact and simplify installation. For specialized roof types or larger arrays, use this kit as part of a tailored mounting plan with professional roof anchors or rail extensions as needed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit fit solar panels with 30 mm and 35 mm frames?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The end clamp has two sides—choose the short for 30 mm frames and the long for 35 mm frames.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the hardware weatherproof for coastal or humid areas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The rails are aluminum and screws are stainless steel; EPDM pads add waterproofing for outdoor durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54205144301752,"sku":"B0FFM7XBXG","price":110.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-packaging-overview.jpg?v=1790640349"},{"product_id":"anbte-folding-grill-table-2ft-portable-metal-camping-table-supports-180-lb-3-heights","title":"Anbte Folding Grill Table 2ft, Portable Metal Camping Table — Supports 180 lb, 3 Heights","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 2ft Folding Grill Table is a compact, portable metal table with an X-shaped frame that supports up to 180 pounds and adjusts to three heights for versatile outdoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLightweight yet heavy-duty, this 2-foot grill table is designed for campers, backyard cooks, and day-trippers who need a stable surface that packs down small. Its coated metal mesh top resists rust and stands up to hot cookware, while the spiral-connected legs create a rigid X-shaped support that reduces wobble. The tabletop and legs fold into a briefcase-size package with a carrying handle, so it slides easily into a trunk, RV, or boat storage space.\u003c\/p\u003e\n\n\u003ch3\u003eHow stable is this table when holding heavy cookware?\u003c\/h3\u003e\n\n\u003cp\u003eThe Anbte grill table uses an upgraded X-shaped structure and spiral-connected legs that lock securely, allowing it to carry up to 180 pounds without flexing. The reinforced design spreads weight evenly across the frame, minimizing rocking on uneven ground.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eX-shaped frame for even weight distribution\u003c\/li\u003e\n  \u003cli\u003eSpiral leg connections that tighten for extra rigidity\u003c\/li\u003e\n  \u003cli\u003eTested load capacity of 180 lb for pots, grills, and coolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat height settings are available and when would I use each?\u003c\/h3\u003e\n\n\u003cp\u003eThis table includes three fixed heights — approximately 10, 18.8, and 28 inches — so you can match the surface to the task at hand. Use the lowest setting for ground-level picnics or beach setups, the mid height for seated meals or prep, and the highest setting for standing grill work or placing a portable stove.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10 in: low-profile for sitting or ground seating\u003c\/li\u003e\n  \u003cli\u003e18.8 in: comfortable for chair seating and prep\u003c\/li\u003e\n  \u003cli\u003e28 in: counter-height for grilling or standing use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the mesh tabletop handle heat and cleanup?\u003c\/h3\u003e\n\n\u003cp\u003eThe tabletop is a coated iron mesh that resists rust and tolerates hot cookware better than many plastic alternatives. Grease and spills sit on the surface and wipe away with a damp cloth or paper towel, and the mesh reduces pooling so the table dries quickly after rain or dishwashing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCoated metal mesh reduces rust and warping\u003c\/li\u003e\n  \u003cli\u003eHeat-tolerant surface for hot griddles and pans\u003c\/li\u003e\n  \u003cli\u003eSimple wipe-clean maintenance; drains standing water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to carry, set up, and store this table?\u003c\/h3\u003e\n\n\u003cp\u003eSetup and takedown take less than a minute: the legs fold and the top collapses into a compact briefcase-size unit with an integrated handle. That portability makes it ideal for car camping, boating, or storing in limited spaces like motorcycle rear seats or small RV compartments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFolds flat to briefcase dimensions for compact storage\u003c\/li\u003e\n  \u003cli\u003eBuilt-in carrying handle for transport convenience\u003c\/li\u003e\n  \u003cli\u003eQuick one-person assembly without tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Anbte 2ft Folding Grill Table is aimed at outdoor enthusiasts, weekend grillers, and compact-living households who need a sturdy, heat-tolerant surface that packs small. It suits campers, tailgaters, anglers, and anyone who wants a dependable table for cooking, prepping, or serving without dedicating vehicle or storage space to large furniture. If you want a moderately heavy-duty, adjustable table that’s quick to set up and easy to carry, this model offers a balanced combination of stability, portability, and weather resistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum weight can the Anbte 2ft table support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The table supports up to 180 pounds when assembled with the X-shaped legs fully engaged.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the tabletop resist rust and high heat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The coated iron mesh top is designed to resist rust and tolerate hot cookware; it wipes clean easily.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54205404545208,"sku":"B0FDQ49ZPH","price":142.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-folded-grill-table.jpg?v=1790642816"},{"product_id":"anbte-solar-panel-mid-clamps-for-unistrut-20pcs-black-30mm-35mm-aluminum-m8-59-hardware","title":"Anbte Solar Panel Mid Clamps for Unistrut — 20pcs Black 30mm\/35mm Aluminum, M8×59 Hardware","description":"\u003cp\u003e\u003cstrong\u003eAnbte 20-piece mid clamp kit secures 30mm–35mm solar panels to Unistrut channels using durable aluminum clamps, M8×59 bolts, and channel squeeze nuts for reliable, weather-resistant mounting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re fitting panels on a home roof, RV, marine deck, or a flat commercial structure, the Anbte mid clamps provide the hardware needed to join adjacent solar modules along Unistrut rails. Designed for 30mm and 35mm framed solar modules, this kit concentrates on the center (mid) connections between two modules, offering a neat black finish and corrosion-resistant aluminum alloy construction for long-term outdoor use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mid clamps attach to Unistrut and framed panels?\u003c\/h3\u003e\n\u003cp\u003eThe clamps are built to sit between two framed modules and fasten to Unistrut using supplied M8×59 bolts and channel squeeze nuts. Pre-drilled holes on the clamp body speed alignment and reduce installation time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip channel squeeze nut into Unistrut slot, align clamp over panel frames.\u003c\/li\u003e\n  \u003cli\u003eInsert M8×59 bolt through clamp into nut and torque to manufacturer specs.\u003c\/li\u003e\n  \u003cli\u003eBlack anodized aluminum resists corrosion and holds panel frames securely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these clamps fit my 30mm or 35mm solar panel frames?\u003c\/h3\u003e\n\u003cp\u003eYes — the Anbte center clamps are sized for common 30mm and 35mm frame thicknesses and are intended specifically for framed photovoltaic modules. They firmly grip the frame edges without requiring frame modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with most framed PV modules 30–35mm thick.\u003c\/li\u003e\n  \u003cli\u003eDesigned as mid clamps for the shared rail section between modules.\u003c\/li\u003e\n  \u003cli\u003eDo not compress or deform frames when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat environments and roof types are these clamps suitable for?\u003c\/h3\u003e\n\u003cp\u003eMade from corrosion-resistant aluminum alloy and finished in black, these mid clamps handle outdoor exposure across a variety of mounting situations. They’re suitable for pitched and flat roofs, RVs, boats, and ground-mounted arrays where Unistrut rails are used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on tile, asphalt shingle, metal standing seam, and flat roof decks when paired with appropriate roof attachments.\u003c\/li\u003e\n  \u003cli\u003eMarine and RV installations benefit from the rust-resistant alloy and secure fasteners.\u003c\/li\u003e\n  \u003cli\u003eRated to withstand typical weather stressors when properly installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware is included and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies 20 mid clamps plus matching M8×59 mm bolts and channel squeeze nuts so you have the essential fasteners for each clamp. Basic hand tools and a torque wrench are recommended for accurate, safe installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 aluminum mid clamps in black finish.\u003c\/li\u003e\n  \u003cli\u003eM8×59 mm mounting bolts and channel squeeze nuts included.\u003c\/li\u003e\n  \u003cli\u003eRequired tools: wrench set, torque wrench, screwdriver, and Unistrut insertion tool if available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, homeowners, and DIY solar enthusiasts who use Unistrut rails and framed photovoltaic modules 30–35mm thick will find this Anbte mid clamp kit useful. It’s especially practical for projects needing reliable center connections between modules—residential rooftop retrofits, RV\/boat arrays, and light commercial systems where corrosion resistance and tidy aesthetics matter. For full system integrity, pair these mid clamps with the correct end clamps, roof-specific anchors, and follow your module and rail manufacturer installation guides. If you need help during or after purchase, Anbte offers customer support to answer fitment or installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these clamps compatible with Unistrut rails?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes channel squeeze nuts designed to fit Unistrut slots and secure the mid clamps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamps fit 30mm and 35mm panel frames?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are sized specifically for 30mm–35mm framed solar modules and serve as center (mid) clamps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54205631267000,"sku":"B0FBWH9FZL","price":106.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-packaging-mid-clamps.jpg?v=1790644785"},{"product_id":"anbte-2-ft-folding-grill-table-aluminum-portable-camping-table-3-heights-10-18-9-27-5-in-heat-resistant-mesh","title":"Anbte 2 ft Folding Grill Table – Aluminum Portable Camping Table, 3 Heights (10\/18.9\/27.5 in), Heat-Resistant Mesh","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 2 ft Folding Grill Table is a lightweight, three-height aluminum camping table with a heat-resistant iron mesh top that sets up in under a minute for BBQs, picnics, and outdoor cooking.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, portable table balances stability and convenience for outdoor enthusiasts who need a durable work surface near a grill, camp stove, or picnic spread. Built from a reinforced aluminum frame and a coated iron mesh tabletop, the table resists rust and tolerates hot pots or grills while folding flat for travel. Its three preset heights—10 in, 18.9 in, and 27.5 in—make it adaptable for low-floor seating, chair-level dining, or standing grill prep.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I set it up and carry it to the campsite?\u003c\/h3\u003e\n\u003cp\u003eSetup is designed to be intuitive: the table unfolds and locks in place without tools, and its carrying handles turn the folded unit into a briefcase-sized package. Most users can open or collapse it in under a minute, then stow it inside a car, camper, or boat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free assembly—snap side clips secure the top\u003c\/li\u003e\n  \u003cli\u003eFolds flat to briefcase dimensions for compact storage\u003c\/li\u003e\n  \u003cli\u003eBuilt-in carry handles for easy transport\u003c\/li\u003e\n  \u003cli\u003eLightweight aluminum frame reduces carry weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the iron mesh top handle hot cookware and outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe tabletop uses a coated metal mesh that dissipates heat and resists warping from standing water, making it suitable near grills and camp stoves. Surface residue and light stains wipe away easily with a damp cloth, so cleanup is fast around food prep areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCoated iron mesh resists rust and warping\u003c\/li\u003e\n  \u003cli\u003eHeat-tolerant surface for hot pans or grill accessories\u003c\/li\u003e\n  \u003cli\u003eSimple maintenance—wipe clean with a damp towel\u003c\/li\u003e\n  \u003cli\u003eMesh design drains water to prevent pooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow stable is the table on uneven ground and what are the load limits?\u003c\/h3\u003e\n\u003cp\u003eStability is improved by the U-shaped reinforced frame and side snaps that lock the tabletop flat. For best performance place the table on relatively level ground and press the center gently to ensure the surface sits level after setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickened aluminum frame for better rigidity\u003c\/li\u003e\n  \u003cli\u003eU-shaped leg design increases lateral stability\u003c\/li\u003e\n  \u003cli\u003eSide snaps keep the tabletop firmly in place\u003c\/li\u003e\n  \u003cli\u003eBest used on flat or mildly uneven surfaces (follow setup note)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat activities and environments is this table best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis multi-function table adapts to a wide variety of indoor and outdoor needs—camping, barbecues, fishing trips, tailgating, RV use, or extra surface space at home. The three height settings let you match the table to low camp chairs, standard picnic seating, or standing prep tasks at a grill.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCamping kitchen station, grill side prep surface\u003c\/li\u003e\n  \u003cli\u003ePicnic and beach table for food and games\u003c\/li\u003e\n  \u003cli\u003eFishing or RV side table for gear and snacks\u003c\/li\u003e\n  \u003cli\u003eIndoor overflow table for cards, crafts, or parties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Anbte 2 ft Folding Grill Table is aimed at campers, backyard grillers, tailgaters, and RV travelers who want a durable, heat-resistant work surface that packs down small. It’s a practical choice for anyone needing a lightweight, corrosion-resistant table that can quickly change heights to match seating and cooking configurations. Keep in mind the table’s height adjusts by leg insertion, so always use on a flat surface and confirm the tabletop is fully snapped level before placing heavy items.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How tall does the table get when fully extended?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tallest setting reaches 27.5 inches (70 cm).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the tabletop rust resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the coated iron mesh top is designed to resist rust and standing water.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54205759914168,"sku":"B0CW1S1F41","price":121.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-folded.jpg?v=1790645787"},{"product_id":"anbte-folding-grill-table-22-8-x-16-silver-3-height-adjustable-heat-resistant-aluminum-camping-table","title":"Anbte Folding Grill Table 22.8\" x 16\" Silver — 3-Height Adjustable, Heat-Resistant Aluminum Camping Table","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 2ft Folding Grill Table is a lightweight, height-adjustable aluminum camping table with a heat-resistant iron mesh top that folds flat for easy travel and storage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you need a compact side surface for a camp stove, a stable platform for grilling, or a quick picnic table, this 22.8\" x 16\" Anbte table balances portability and strength. It collapses to a briefcase-sized package with an integrated handle, uses a coated metal mesh tabletop that resists rust and stains, and offers three preset heights to suit a range of outdoor and indoor activities.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the height adjustment make outdoor cooking easier?\u003c\/h3\u003e\n\u003cp\u003eThe Anbte table has three height positions—approximately 10\", 20\", and 27.5\"—so you can match the working surface to your gear and posture. Raising the table keeps burners and grills at a comfortable level; lowering it creates a stable low table for ground seating or children.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree secure leg positions for quick reconfiguration\u003c\/li\u003e\n  \u003cli\u003eSuitable for tabletop stoves, small grills, and prep work\u003c\/li\u003e\n  \u003cli\u003eUse the tallest setting for standing prep or the shortest for seated use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the tabletop safe for hot pans and easy to clean?\u003c\/h3\u003e\n\u003cp\u003eThe top is a coated iron mesh designed to tolerate heat better than many plastic surfaces and to drain standing water so metal won't warp. Because of the smooth coating and open weave, spills and grease wipe away quickly with a damp cloth or paper towel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant metal mesh reduces warping under hot cookware\u003c\/li\u003e\n  \u003cli\u003eCoating prevents rust and simplifies cleaning\u003c\/li\u003e\n  \u003cli\u003ePerforated surface helps cool hot items faster and drains liquids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and durable is the Anbte folding table?\u003c\/h3\u003e\n\u003cp\u003eThe frame is made from thickened aluminum for a balance of rigidity and light weight, and the U-shaped legs plus side snaps lock the tabletop firmly in place. It folds flat in under a minute into a compact form with a carry handle, making it easy to stow in a car, RV, or backpack compartment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpdated aluminum frame for strength without excess weight\u003c\/li\u003e\n  \u003cli\u003eSide snaps secure the top and keep the surface level\u003c\/li\u003e\n  \u003cli\u003eFolds to briefcase size and includes an integrated handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat activities and environments is this table suited for?\u003c\/h3\u003e\n\u003cp\u003eThis small folding table is purposely versatile: use it as a grill table on camping trips, a side table at picnics, a prep surface while fishing, or extra counter space at tailgates and beach days. It performs equally well indoors as a temporary side table or card table for gatherings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCamping, barbecue, and picnic use\u003c\/li\u003e\n  \u003cli\u003eFishing trips, RV and van life, beach days, and backyard cookouts\u003c\/li\u003e\n  \u003cli\u003eIndoor utility for crafts, cards, or extra serving space\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Anbte 2ft Folding Grill Table is designed for outdoor enthusiasts and everyday users who need a compact, reliable surface that adapts to different heights and withstands hot cookware. It’s a good fit for campers, tailgaters, anglers, RV travelers, or anyone who wants a lightweight, quick-to-deploy table for cooking and serving. Note: for best stability, set the table on a level surface and verify the tabletop is fully snapped into position before loading heavy items.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the folded dimensions and weight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It folds to roughly briefcase size for easy carrying; the product is lightweight thanks to an aluminum frame, ideal for vehicle storage and travel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it hold a small grill or stove safely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the coated iron mesh top tolerates heat and supports compact grills and stoves when properly snapped and used on level ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54206555390136,"sku":"B0DNZ5DCHR","price":121.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-folded-handle.jpg?v=1790651705"},{"product_id":"anbte-folding-camping-table-24-x-16-3-height-portable-folding-table-lightweight-aluminum-frame","title":"Anbte Folding Camping Table 24 x 16 — 3-Height Portable Folding Table, Lightweight Aluminum Frame","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte Folding Camping Table is a compact, three-height portable table (24\" x 16\") designed for camping, picnics, tailgating and small-space living.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLightweight yet sturdy, this Anbte folding table combines an aluminum-alloy frame with a smooth MDF surface and a removable storage net so you can set up a working surface almost anywhere. It folds down to a briefcase-sized 16 x 12 x 3 inches for easy transport and stores neatly in cars, backpacks or RVs. The table’s three preset heights—9\", 18\" and 27.5\"—let you use it for low-sitting camp chairs, standard chairs, or as a standing-level prep surface.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I set it up and pack it away?\u003c\/h3\u003e\n\u003cp\u003eAssembly is tool-free and designed to be finished in about a minute. The folding legs lock into preset positions for safe use, and the whole unit collapses flat into a compact form for transport.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnfolds and locks without tools, ready to use in roughly 60 seconds.\u003c\/li\u003e\n  \u003cli\u003eFolds to 16 x 12 x 3 inches — briefcase-sized for easy carrying.\u003c\/li\u003e\n  \u003cli\u003eLightweight frame fits in car trunks, backpacks, and small storage spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat height options does the table offer and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe Anbte table has three fixed height settings—9 inches, 18 inches and 27.5 inches—so it adapts to different seating and tasks. This makes it useful for children’s activities, seated dining, or taller surfaces like grills and counters when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9\" setting for low camp chairs, floor seating or kids’ play.\u003c\/li\u003e\n  \u003cli\u003e18\" as a versatile mid-height for picnic chairs and casual dining.\u003c\/li\u003e\n  \u003cli\u003e27.5\" for standard chair\/table height or food prep next to a grill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it durable and simple to maintain outdoors?\u003c\/h3\u003e\n\u003cp\u003eBuilt with a thickened aluminum-alloy frame and a smooth MDF tabletop, the table balances stability with low weight. The surface wipes clean easily; avoid extended exposure to heavy rain or direct heat sources to preserve performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum-alloy legs provide strength while keeping weight down.\u003c\/li\u003e\n  \u003cli\u003eMDF tabletop surface is smooth and easy to wipe clean.\u003c\/li\u003e\n  \u003cli\u003eRemovable storage net adds room for gear and can be detached for transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical uses and safety tips should I know?\u003c\/h3\u003e\n\u003cp\u003eThis multipurpose table works for camping, barbecues, picnics, card games, laptop work and kids’ crafts. Use on flat, stable ground, avoid wet or rainy conditions, and keep hot or flaming objects away from the MDF surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for camping, fishing, tailgates, indoor crafts and small-dining setups.\u003c\/li\u003e\n  \u003cli\u003eUse on level surfaces and press the tabletop gently to ensure leg locks engage.\u003c\/li\u003e\n  \u003cli\u003eDo not expose to rain or place hot cookware directly on the table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Anbte Folding Camping Table suits outdoors enthusiasts, RV and van lifers, families with young children, and anyone needing a portable, quick-to-deploy surface. Choose this model if you value a lightweight table that packs small but offers multiple height settings and an optional storage net for extra convenience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How big is the table when folded?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It folds to about 16 x 12 x 3 inches, small enough to carry like a briefcase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it on uneven ground?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use on flat surfaces for safety; uneven ground can prevent leg locks from seating properly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54206590189752,"sku":"B0BRZ4C595","price":121.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-folded-out.jpg?v=1790652030"},{"product_id":"anbte-2ft-camping-folding-table-24-x-16-in-lightweight-aluminum-3-height-portable-with-storage-mesh","title":"Anbte 2ft Camping Folding Table 24 x 16 in — Lightweight Aluminum, 3-Height Portable with Storage Mesh","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 2ft Camping Folding Table is a lightweight, aluminum-frame portable table with three adjustable heights, an under-table storage mesh, and a compact fold-flat design for travel and outdoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis small 24\" x 16\" table is designed for campers, picnickers, tailgaters and small-space dwellers who need a stable surface that packs down into a briefcase-sized carry case. Built from thicker aluminum alloy and a smooth MDF tabletop, it balances strength and portability: the table supports up to 66 lbs while weighing just 5.7 lbs. Quick to set up and simple to clean, it adapts from low lawn seating to a chair-height surface and adds extra carrying capacity with a detachable storage net.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I set this table up and take it down?\u003c\/h3\u003e\n\u003cp\u003eThe Anbte folding table is engineered for speed and simplicity—most users can assemble or collapse it in under one minute. The legs lock into three predetermined heights, and the top folds flat for compact storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFolds into briefcase-sized package with carry handle\u003c\/li\u003e\n  \u003cli\u003eTool-free setup and leg locks at 10, 18.1, and 27.5 inches\u003c\/li\u003e\n  \u003cli\u003eWeighs 5.7 lbs for easy transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the table stable enough for outdoor cooking and games?\u003c\/h3\u003e\n\u003cp\u003eThe frame uses thicker aluminum alloy for improved rigidity, and the MDF surface provides a flat, even work area. For everyday outdoor uses—food prep, a small grill side table, or board and card games—the table holds reliably within its 66 lb limit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid aluminum legs reduce wobble on uneven ground\u003c\/li\u003e\n  \u003cli\u003eMDF tabletop resists warping and cleans easily\u003c\/li\u003e\n  \u003cli\u003eSupports up to 66 lbs when set on firm surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the storage net useful on trips?\u003c\/h3\u003e\n\u003cp\u003eThe included capacious mesh hangs beneath the tabletop to keep essentials organized and off the ground. It’s ideal for lightweight items you want quick access to—phones, utensils, napkins, or a small cooler bag—freeing tabletop space for cooking or dining.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAttaches beneath the tabletop for hidden storage\u003c\/li\u003e\n  \u003cli\u003eHolds lightweight, small items to maximize tabletop area\u003c\/li\u003e\n  \u003cli\u003eHelps keep gear clean and out of the dirt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan different heights really change how I use the table?\u003c\/h3\u003e\n\u003cp\u003eYes—three fixed height settings let you tailor the table to your activity and seating. Use the lowest setting for picnic blankets or kids on the lawn, the mid setting for low camping chairs, and the highest setting when you’re seated on a standard chair or preparing food at standing elbow height.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 in for ground seating and kids’ activities\u003c\/li\u003e\n  \u003cli\u003e18.1 in for low camp chairs or casual use\u003c\/li\u003e\n  \u003cli\u003e27.5 in for chair-height dining and food prep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this table is for: The Anbte 2ft Camping Folding Table suits anyone who needs a dependable, compact surface on the go—campers, RV owners, beach visitors, anglers, tailgaters, and apartment dwellers with limited storage. It’s also useful as a temporary work or study station, a grill or serving side table, and a children’s activity table. If you prioritize fast setup, lightweight transport, and adaptable height options in a small footprint, this table is designed to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the adjustable height options?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The table locks at three heights: 10\", 18.1\", and 27.5\" to suit ground seating, low chairs, and chair-height use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much weight can the table support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Anbte table supports up to 66 lbs while weighing only 5.7 lbs itself.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54206598217912,"sku":"B0FMY8KBW3","price":129.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-packaging-folded.jpg?v=1790652038"},{"product_id":"anbte-camping-table-24-x-16-2ft-foldable-portable-table-3-heights-mesh-storage","title":"Anbte Camping Table 24 x 16 (2ft) Foldable Portable Table — 3 Heights, Mesh Storage","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 2ft Camping Table is a lightweight, foldable 24\" x 16\" tabletop with three adjustable heights and a built-in storage mesh, designed for quick setup and versatile outdoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact folding table packs convenience into a briefcase-sized unit that sets up in under a minute. With an aluminum-alloy frame and MDF tabletop, it balances portability with a 66 lb load capacity. The three preset leg heights and a detachable storage net make it adaptable for picnics, tailgating, camping, or patio use where space and fast assembly matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I set up the Anbte 2ft Camping Table?\u003c\/h3\u003e\n\n\u003cp\u003eAssembly is straightforward and tool-free: unfold the legs, lock them into one of three height positions, and clip the storage net underneath if needed. Most people can fully erect the table in under 60 seconds, making it handy for sudden weather changes or quick meal stops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-minute setup—unfold and lock legs\u003c\/li\u003e\n  \u003cli\u003eThree fixed heights: 10\", 18.1\", 27.5\" (23, 46, 70 cm)\u003c\/li\u003e\n  \u003cli\u003eTool-free assembly and compact folding for transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this table hold gear for cooking, eating, or playing games?\u003c\/h3\u003e\n\n\u003cp\u003eYes—the frame is built from thicker aluminum alloy for sturdiness while the MDF tabletop wipes clean after spills. The table supports up to 66 pounds, which is suitable for meal prep, a small grill side station, board games, or laptop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e66 lb weight limit for cookware, dishes, or electronics\u003c\/li\u003e\n  \u003cli\u003eSmooth MDF top resists messes and cleans easily\u003c\/li\u003e\n  \u003cli\u003eStable leg design for outdoor surfaces like grass or gravel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable is this folding table for travel and storage?\u003c\/h3\u003e\n\n\u003cp\u003eAt approximately 5.7 pounds and a briefcase-sized folded profile, the table is designed for easy carrying and compact storage. It includes a carry handle and fits well in car trunks, RV compartments, and bike or kayak storage areas, so it’s practical for day trips and weekend outings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight at about 5.7 lbs for easy transport\u003c\/li\u003e\n  \u003cli\u003eFolds into a compact package with a built-in carry handle\u003c\/li\u003e\n  \u003cli\u003eFits in cars, RVs, rafts, motorcycles, and closets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat extra storage or organization does the table offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe Anbte table includes a roomy mesh storage net that attaches beneath the tabletop to keep small items off the ground. This is helpful for holding utensils, phone and keys, lanterns, or lightweight supplies so your surface stays clear for food or activities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacious removable mesh shelf for small items\u003c\/li\u003e\n  \u003cli\u003eKeeps essentials elevated and protected from dirt\u003c\/li\u003e\n  \u003cli\u003eEasy to assemble and remove for cleaning or packing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Anbte 24\" x 16\" foldable table fits anyone who needs quick, stable surface space away from home: campers, tailgaters, anglers, picnic-goers, and parents looking for a portable kids' activity table. It also suits travelers who need compact gear that folds small but performs reliably for cooking, dining, or work outdoors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the available height settings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The table locks at 10\", 18.1\", and 27.5\" (23, 46, 70 cm) to suit sitting on the ground, chairs, or standing use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much weight can the Anbte 2ft table hold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The reinforced aluminum frame supports up to 66 pounds when used on a level surface.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54208132808888,"sku":"B0FF9XSMZB","price":119.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-packaging-folded-table.jpg?v=1790658433"},{"product_id":"anbte-3-ft-folding-grill-table-aluminum-portable-camping-table-3-height-up-to-27-5","title":"Anbte 3 ft Folding Grill Table — Aluminum Portable Camping Table, 3-Height (Up to 27.5\")","description":"\u003cp\u003e\u003cstrong\u003eAnbte 3 ft Folding Grill Table is a lightweight, three-height aluminum camping table built for grilling, picnics and portable outdoor use, adjustable up to 27.5 inches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact folding table combines a coated iron mesh top with a strengthened aluminum frame so it resists rust, sheds spills and packs flat for travel. Designed to convert from low coffee-table height to standard standing grill support, it sets up in under a minute and closes down to briefcase size with a carry handle. The result is a versatile surface for camping, barbecues, fishing trips and small outdoor kitchens without adding heavy bulk to your gear.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does the Anbte folding table set up and pack away?\u003c\/h3\u003e\n\n\u003cp\u003eAssembly is tool-free and fast: unfold the legs, lock the snaps, and press the tabletop flat. Folding is the reverse; the table collapses to a compact rectangle with a built-in handle for easy transport.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSets up or folds in less than a minute.\u003c\/li\u003e\n  \u003cli\u003eFolds down to briefcase-sized profile for trunk or RV storage.\u003c\/li\u003e\n  \u003cli\u003eIntegrated carry handle for one-handed transport.\u003c\/li\u003e\n  \u003cli\u003eSide snaps secure the mesh top when open.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat height options does this table offer and why do they matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe table adjusts to three heights—10 in, 18.9 in and 27.5 in—so you can use it as a low coffee table, a mid-level prep surface or a near-stand height for a small grill. Multiple heights make the table useful across activities from lounging at the beach to cooking beside a camp stove.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10 in: low lounge or footrest use.\u003c\/li\u003e\n  \u003cli\u003e18.9 in: standard picnic or side-table height.\u003c\/li\u003e\n  \u003cli\u003e27.5 in: comfortable grill prep or work surface.\u003c\/li\u003e\n  \u003cli\u003eAdjusts by inserting\/pulling legs; use on flat ground for stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the tabletop durable and easy to clean after outdoor use?\u003c\/h3\u003e\n\n\u003cp\u003eThe tabletop uses a coated iron mesh to prevent rusting and warping from standing water while allowing air flow and quick drainage. Surface dirt and light stains wipe away with a damp cloth or paper towel, and the mesh reduces heat transfer from hot cookware.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCoated metal mesh resists rust and standing-water damage.\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant design suitable for grills or hot pans.\u003c\/li\u003e\n  \u003cli\u003eSimplified cleaning—wipe off spills and food debris.\u003c\/li\u003e\n  \u003cli\u003eMesh reduces surface staining and water pooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow sturdy is the frame and what keeps the table level?\u003c\/h3\u003e\n\n\u003cp\u003eBuilt from upgraded, thickened aluminum, the frame balances low weight with improved rigidity. A U-shaped leg design and side snaps hold the tabletop steady and keep it level during normal outdoor use when placed on flat terrain.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThickened aluminum frame for long-term durability.\u003c\/li\u003e\n  \u003cli\u003eU-shaped legs increase lateral stability.\u003c\/li\u003e\n  \u003cli\u003eSide snaps secure the top to the frame to prevent wobble.\u003c\/li\u003e\n  \u003cli\u003eBest used on a flat surface to maintain evenness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Anbte 3 ft Folding Grill Table is aimed at campers, tailgaters, beachgoers and backyard grillers who want a lightweight, adjustable surface that packs small. It suits anyone needing a multi-height table for food prep, serving, card games or a portable workstation—especially those who prioritize corrosion resistance, quick setup and easy storage in cars, RVs or backpacks.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact height settings for this table?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The table adjusts to 10 in, 18.9 in and 27.5 in heights for low, mid and near-stand use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the tabletop handle hot pans or a grill?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The coated metal mesh is heat-resistant and designed for use with hot cookware and grills.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54209794670776,"sku":"B0DFMGRPKH","price":169.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-folded-table.jpg?v=1790672357"},{"product_id":"anbte-3ft-folding-camping-grill-table-black-2-height-adjustable-15-27-5-heat-resistant-mesh","title":"Anbte 3ft Folding Camping Grill Table — Black, 2-Height Adjustable 15\"\/27.5\", Heat-Resistant Mesh","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte 3ft Folding Camping Grill Table is a lightweight, height-adjustable outdoor table with a heat-resistant iron mesh top designed for grilling, picnics, and easy transport.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact folding table combines a durable aluminum-alloy frame with a coated iron mesh tabletop so you can set hot cookware or a portable grill on it without worrying about surface damage. It collapses to briefcase size with integrated handles for quick carry and storage, and its two-height settings let you adapt between low lounge use and standard serving height.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the adjustable height improve outdoor cooking and dining?\u003c\/h3\u003e\n\u003cp\u003eThe table adjusts between about 15 inches and 27.5 inches, making it versatile for multiple tasks: low seating, standing prep, or holding a grill. Quick snap locks secure the top at the chosen height so it stays stable during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-position legs: low (15 in) and high (27.5 in) for varied setups\u003c\/li\u003e\n  \u003cli\u003eSide snaps lock the tabletop to prevent wobble\u003c\/li\u003e\n  \u003cli\u003eU-shaped frame boosts steadiness on uneven ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the tabletop safe for hot pans and grills?\u003c\/h3\u003e\n\u003cp\u003eThe tabletop uses a coated iron mesh that tolerates heat better than typical laminated or plastic tops, so you can place hot pots or small grills on it with less risk of scorching. The open mesh design also vents heat and lets crumbs fall through, simplifying cleanup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCoated iron mesh resists heat and surface stains\u003c\/li\u003e\n  \u003cli\u003eMesh pattern reduces trapped debris and accelerates cooling\u003c\/li\u003e\n  \u003cli\u003eWipe-clean finish makes spills easy to remove\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to carry and assemble the foldable grill table?\u003c\/h3\u003e\n\u003cp\u003eAssembly is tool-free and fast: unfold the frame, lock the tabletop, and set the leg height. When finished, the table folds down to a compact briefcase-size and the built-in handles make it simple to tote to campsites, tailgates, or the beach.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFolds flat in under a minute for storage or transport\u003c\/li\u003e\n  \u003cli\u003eBuilt-in carrying handles for one-handed portability\u003c\/li\u003e\n  \u003cli\u003eTool-free setup with quick-release snaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this table hold heavy gear and stay stable outdoors?\u003c\/h3\u003e\n\u003cp\u003eConstructed from upgraded, thickened aluminum alloy with a U-shaped support frame, the table is built to carry typical camping and barbecue equipment. The design balances lightweight portability with a robust structure to reduce wobble on uneven surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickened aluminum alloy frame for long-term use\u003c\/li\u003e\n  \u003cli\u003eU-shaped frame increases lateral stability\u003c\/li\u003e\n  \u003cli\u003eSide snaps keep the top level under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Anbte 3ft Folding Camping Grill Table is aimed at campers, tailgaters, beachgoers, weekend BBQ hosts, and anglers who need a durable, space-saving work surface. It’s ideal for anyone who wants a heat-tolerant tabletop that folds compactly for transport, and for people who switch between seated and standing activities while outdoors. If you value quick setup, easy cleaning, and a sturdy surface for grills or cookware, this table offers a practical balance of portability and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What heights does the table support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The table adjusts between approximately 15 inches and 27.5 inches with two secure height settings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I put a hot pan or grill on the tabletop?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the coated iron mesh top is heat-resistant and designed to handle hot cookware with easy wipe-clean maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54210108260536,"sku":"B0H68SB4KX","price":171.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-front-view-folded-and-open.jpg?v=1790674836"},{"product_id":"anbte-folding-camping-table-36x24-in-black-lightweight-2-height-picnic-table-with-storage-net-70-lb-capacity","title":"Anbte Folding Camping Table 36x24 in Black — Lightweight 2-Height Picnic Table with Storage Net, 70 lb Capacity","description":"\u003cp\u003e\u003cstrong\u003eThe Anbte Folding Camping Table is a lightweight, two-height portable picnic table (36\" x 24\") with a storage net, quick setup, and a sturdy aluminum frame for versatile outdoor and indoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSimple to carry and fast to unfold, this compact table is built for camping, tailgates, picnics, and small-space living. The tabletop is a smooth, easy-to-clean MDF surface in black, supported by a thick aluminum alloy frame that balances low weight with a 70 lb load capacity. It folds down into a briefcase-sized package for tidy storage and transport, and a mesh storage net adds practical space for utensils, books, or small gear.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I set this table up and pack it away?\u003c\/h3\u003e\n\u003cp\u003eSetup is designed to be intuitive and fast — you can unfold and lock the table into place in under one minute. Folding it back into the compact carry case takes only a few steps, making it ideal for transitions between locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnfolds and locks in under 60 seconds\u003c\/li\u003e\n  \u003cli\u003eCompact folded dimensions like a briefcase for easy storage\u003c\/li\u003e\n  \u003cli\u003eLightweight 7.7 lb frame for effortless carrying\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the table handle different activities and heights?\u003c\/h3\u003e\n\u003cp\u003eYes. The table offers two adjustable leg heights — 15\" for low seating and 28\" for regular chairs — so it adapts to many uses. Its 36\" x 24\" surface supports cooking tools, board games, laptops, or serving platters while the storage net keeps essentials close by.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo height settings: 15\" and 28\" to suit seating or standing needs\u003c\/li\u003e\n  \u003cli\u003e36\" L x 24\" W tabletop provides plenty of usable surface\u003c\/li\u003e\n  \u003cli\u003eStorage net under the surface for utensils, phones, and small items\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the build durable enough for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe structure combines a robust aluminum alloy frame with a stain-resistant MDF top to withstand repeated outdoor use without adding unnecessary weight. The design accepts up to 70 lbs, giving stable support for grills, food dishes, coolers, or gear during activities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick aluminum alloy frame for corrosion resistance and strength\u003c\/li\u003e\n  \u003cli\u003eMDF tabletop is smooth, easy to wipe clean, and stain resistant\u003c\/li\u003e\n  \u003cli\u003eRated to support up to 70 lb while weighing just 7.7 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere is this table most useful and how should I care for it?\u003c\/h3\u003e\n\u003cp\u003eThis table performs well at campsites, tailgate parties, backyard barbecues, fishing trips, RV travel, and as an occasional indoor surface. Wipe the tabletop clean with a damp cloth, keep the frame dry when storing long-term, and avoid prolonged exposure to standing water to preserve the finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for camping, picnics, BBQs, fishing, and portable work surfaces\u003c\/li\u003e\n  \u003cli\u003eSimple maintenance: wipe clean and store dry\u003c\/li\u003e\n  \u003cli\u003eFoldable form fits in car trunks, RV storage, or closet shelves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Outdoor enthusiasts, weekend campers, tailgaters, and anyone who needs a reliable, easy-to-transport table for short-term use. It’s a smart choice for families, solo travelers, and apartment dwellers who want a sturdy tabletop that collapses for compact storage and adapts to different seating heights.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the folded dimensions and how much does it weigh?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It folds to a briefcase-sized package, weighs 7.7 lbs, and is easy to carry in a car or RV.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the table support a grill or cooler?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the sturdy aluminum frame and MDF top support up to 70 lbs, suitable for grills or coolers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Anbte","offers":[{"title":"Default Title","offer_id":54210267513016,"sku":"B0CNRLQJ8X","price":192.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/files\/anbte-folded-briefcase-pose.jpg?v=1790678173"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0636\/7416\/collections\/anbte-folded-briefcase-pose.jpg?v=1790680073","url":"https:\/\/canadianlawn.ca\/collections\/anbte.oembed","provider":"Canadian Lawn","version":"1.0","type":"link"}